/*- * Copyright (c) 1997, 1998, 1999 * Bill Paul . All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. All advertising materials mentioning features or use of this software * must display the following acknowledgement: * This product includes software developed by Bill Paul. * 4. Neither the name of the author nor the names of any co-contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY Bill Paul AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL Bill Paul OR THE VOICES IN HIS HEAD * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF * THE POSSIBILITY OF SUCH DAMAGE. * * $FreeBSD: head/sys/dev/ti/if_tireg.h 227347 2011-11-08 18:23:02Z yongari $ */ /* * Tigon register offsets. These are memory mapped registers * which can be accessed with the CSR_READ_4()/CSR_WRITE_4() macros. * Each register must be accessed using 32 bit operations. * * All reegisters are accessed through a 16K shared memory block. * The first group of registers are actually copies of the PCI * configuration space registers. */ #define TI_PCI_ID 0x000 /* PCI device/vendor ID */ #define TI_PCI_CMDSTAT 0x004 #define TI_PCI_CLASSCODE 0x008 #define TI_PCI_BIST 0x00C #define TI_PCI_LOMEM 0x010 /* Shared memory base address */ #define TI_PCI_SUBSYS 0x02C #define TI_PCI_ROMBASE 0x030 #define TI_PCI_INT 0x03C #ifndef PCIM_CMD_MWIEN #define PCIM_CMD_MWIEN 0x0010 #endif /* * Alteon AceNIC PCI vendor/device ID. */ #define ALT_VENDORID 0x12AE #define ALT_DEVICEID_ACENIC 0x0001 #define ALT_DEVICEID_ACENIC_COPPER 0x0002 /* * 3Com 3c985 PCI vendor/device ID. */ #define TC_VENDORID 0x10B7 #define TC_DEVICEID_3C985 0x0001 /* * Netgear GA620 PCI vendor/device ID. */ #define NG_VENDORID 0x1385 #define NG_DEVICEID_GA620 0x620A #define NG_DEVICEID_GA620T 0x630A /* * SGI device/vendor ID. */ #define SGI_VENDORID 0x10A9 #define SGI_DEVICEID_TIGON 0x0009 /* * DEC vendor ID, Farallon device ID. Apparently, Farallon used * the DEC vendor ID in their cards by mistake. */ #define DEC_VENDORID 0x1011 #define DEC_DEVICEID_FARALLON_PN9000SX 0x001a /* * Tigon configuration and control registers. */ #define TI_MISC_HOST_CTL 0x040 #define TI_MISC_LOCAL_CTL 0x044 #define TI_SEM_AB 0x048 /* Tigon 2 only */ #define TI_MISC_CONF 0x050 /* Tigon 2 only */ #define TI_TIMER_BITS 0x054 #define TI_TIMERREF 0x058 #define TI_PCI_STATE 0x05C #define TI_MAIN_EVENT_A 0x060 #define TI_MAILBOX_EVENT_A 0x064 #define TI_WINBASE 0x068 #define TI_WINDATA 0x06C #define TI_MAIN_EVENT_B 0x070 /* Tigon 2 only */ #define TI_MAILBOX_EVENT_B 0x074 /* Tigon 2 only */ #define TI_TIMERREF_B 0x078 /* Tigon 2 only */ #define TI_SERIAL 0x07C /* * Misc host control bits. */ #define TI_MHC_INTSTATE 0x00000001 #define TI_MHC_CLEARINT 0x00000002 #define TI_MHC_RESET 0x00000008 #define TI_MHC_BYTE_SWAP_ENB 0x00000010 #define TI_MHC_WORD_SWAP_ENB 0x00000020 #define TI_MHC_MASK_INTS 0x00000040 #define TI_MHC_CHIP_REV_MASK 0xF0000000 #define TI_MHC_BIGENDIAN_INIT \ (TI_MHC_BYTE_SWAP_ENB|TI_MHC_WORD_SWAP_ENB|TI_MHC_CLEARINT) #define TI_MHC_LITTLEENDIAN_INIT \ (TI_MHC_WORD_SWAP_ENB|TI_MHC_CLEARINT) /* * Tigon chip rev values. Rev 4 is the Tigon 1. Rev 6 is the Tigon 2. * Rev 5 is also the Tigon 2, but is a broken version which was never * used in any actual hardware, so we ignore it. */ #define TI_REV_TIGON_I 0x40000000 #define TI_REV_TIGON_II 0x60000000 /* * Firmware revision that we want. */ #define TI_FIRMWARE_MAJOR 0xc #define TI_FIRMWARE_MINOR 0x4 #define TI_FIRMWARE_FIX 0xb /* * Miscelaneous Local Control register. */ #define TI_MLC_EE_WRITE_ENB 0x00000010 #define TI_MLC_SRAM_BANK_SIZE 0x00000300 /* Tigon 2 only */ #define TI_MLC_LOCALADDR_21 0x00004000 #define TI_MLC_LOCALADDR_22 0x00008000 #define TI_MLC_SBUS_WRITEERR 0x00080000 #define TI_MLC_EE_CLK 0x00100000 #define TI_MLC_EE_TXEN 0x00200000 #define TI_MLC_EE_DOUT 0x00400000 #define TI_MLC_EE_DIN 0x00800000 /* Possible memory sizes. */ #define TI_MLC_SRAM_BANK_DISA 0x00000000 #define TI_MLC_SRAM_BANK_1024K 0x00000100 #define TI_MLC_SRAM_BANK_512K 0x00000200 #define TI_MLC_SRAM_BANK_256K 0x00000300 /* * Offset of MAC address inside EEPROM. */ #define TI_EE_MAC_OFFSET 0x8c #define TI_DMA_ASSIST 0x11C #define TI_CPU_STATE 0x140 #define TI_CPU_PROGRAM_COUNTER 0x144 #define TI_SRAM_ADDR 0x154 #define TI_SRAM_DATA 0x158 #define TI_GEN_0 0x180 #define TI_GEN_X 0x1FC #define TI_MAC_TX_STATE 0x200 #define TI_MAC_RX_STATE 0x220 #define TI_CPU_CTL_B 0x240 /* Tigon 2 only */ #define TI_CPU_PROGRAM_COUNTER_B 0x244 /* Tigon 2 only */ #define TI_SRAM_ADDR_B 0x254 /* Tigon 2 only */ #define TI_SRAM_DATA_B 0x258 /* Tigon 2 only */ #define TI_GEN_B_0 0x280 /* Tigon 2 only */ #define TI_GEN_B_X 0x2FC /* Tigon 2 only */ /* * Misc config register. */ #define TI_MCR_SRAM_SYNCHRONOUS 0x00100000 /* Tigon 2 only */ /* * PCI state register. */ #define TI_PCISTATE_FORCE_RESET 0x00000001 #define TI_PCISTATE_PROVIDE_LEN 0x00000002 #define TI_PCISTATE_READ_MAXDMA 0x0000001C #define TI_PCISTATE_WRITE_MAXDMA 0x000000E0 #define TI_PCISTATE_MINDMA 0x0000FF00 #define TI_PCISTATE_FIFO_RETRY_ENB 0x00010000 #define TI_PCISTATE_USE_MEM_RD_MULT 0x00020000 #define TI_PCISTATE_NO_SWAP_READ_DMA 0x00040000 #define TI_PCISTATE_NO_SWAP_WRITE_DMA 0x00080000 #define TI_PCISTATE_66MHZ_BUS 0x00080000 /* Tigon 2 only */ #define TI_PCISTATE_32BIT_BUS 0x00100000 /* Tigon 2 only */ #define TI_PCISTATE_ENB_BYTE_ENABLES 0x00800000 /* Tigon 2 only */ #define TI_PCISTATE_READ_CMD 0x0F000000 #define TI_PCISTATE_WRITE_CMD 0xF0000000 #define TI_PCI_READMAX_4 0x04 #define TI_PCI_READMAX_16 0x08 #define TI_PCI_READMAX_32 0x0C #define TI_PCI_READMAX_64 0x10 #define TI_PCI_READMAX_128 0x14 #define TI_PCI_READMAX_256 0x18 #define TI_PCI_READMAX_1024 0x1C #define TI_PCI_WRITEMAX_4 0x20 #define TI_PCI_WRITEMAX_16 0x40 #define TI_PCI_WRITEMAX_32 0x60 #define TI_PCI_WRITEMAX_64 0x80 #define TI_PCI_WRITEMAX_128 0xA0 #define TI_PCI_WRITEMAX_256 0xC0 #define TI_PCI_WRITEMAX_1024 0xE0 #define TI_PCI_READ_CMD 0x06000000 #define TI_PCI_WRITE_CMD 0x70000000 /* * DMA state register. */ #define TI_DMASTATE_ENABLE 0x00000001 #define TI_DMASTATE_PAUSE 0x00000002 /* * CPU state register. */ #define TI_CPUSTATE_RESET 0x00000001 #define TI_CPUSTATE_STEP 0x00000002 #define TI_CPUSTATE_ROMFAIL 0x00000010 #define TI_CPUSTATE_HALT 0x00010000 /* * MAC TX state register */ #define TI_TXSTATE_RESET 0x00000001 #define TI_TXSTATE_ENB 0x00000002 #define TI_TXSTATE_STOP 0x00000004 /* * MAC RX state register */ #define TI_RXSTATE_RESET 0x00000001 #define TI_RXSTATE_ENB 0x00000002 #define TI_RXSTATE_STOP 0x00000004 /* * Tigon 2 mailbox registers. The mailbox area consists of 256 bytes * split into 64 bit registers. Only the lower 32 bits of each mailbox * are used. */ #define TI_MB_HOSTINTR_HI 0x500 #define TI_MB_HOSTINTR_LO 0x504 #define TI_MB_HOSTINTR TI_MB_HOSTINTR_LO #define TI_MB_CMDPROD_IDX_HI 0x508 #define TI_MB_CMDPROD_IDX_LO 0x50C #define TI_MB_CMDPROD_IDX TI_MB_CMDPROD_IDX_LO #define TI_MB_SENDPROD_IDX_HI 0x510 #define TI_MB_SENDPROD_IDX_LO 0x514 #define TI_MB_SENDPROD_IDX TI_MB_SENDPROD_IDX_LO #define TI_MB_STDRXPROD_IDX_HI 0x518 /* Tigon 2 only */ #define TI_MB_STDRXPROD_IDX_LO 0x51C /* Tigon 2 only */ #define TI_MB_STDRXPROD_IDX TI_MB_STDRXPROD_IDX_LO #define TI_MB_JUMBORXPROD_IDX_HI 0x520 /* Tigon 2 only */ #define TI_MB_JUMBORXPROD_IDX_LO 0x524 /* Tigon 2 only */ #define TI_MB_JUMBORXPROD_IDX TI_MB_JUMBORXPROD_IDX_LO #define TI_MB_MINIRXPROD_IDX_HI 0x528 /* Tigon 2 only */ #define TI_MB_MINIRXPROD_IDX_LO 0x52C /* Tigon 2 only */ #define TI_MB_MINIRXPROD_IDX TI_MB_MINIRXPROD_IDX_LO #define TI_MB_RSVD 0x530 /* * Tigon 2 general communication registers. These are 64 and 32 bit * registers which are only valid after the firmware has been * loaded and started. They actually exist in NIC memory but are * mapped into the host memory via the shared memory region. * * The NIC internally maps these registers starting at address 0, * so to determine the NIC address of any of these registers, we * subtract 0x600 (the address of the first register). */ #define TI_GCR_BASE 0x600 #define TI_GCR_MACADDR 0x600 #define TI_GCR_PAR0 0x600 #define TI_GCR_PAR1 0x604 #define TI_GCR_GENINFO_HI 0x608 #define TI_GCR_GENINFO_LO 0x60C #define TI_GCR_MCASTADDR 0x610 /* obsolete */ #define TI_GCR_MAR0 0x610 /* obsolete */ #define TI_GCR_MAR1 0x614 /* obsolete */ #define TI_GCR_OPMODE 0x618 #define TI_GCR_DMA_READCFG 0x61C #define TI_GCR_DMA_WRITECFG 0x620 #define TI_GCR_TX_BUFFER_RATIO 0x624 #define TI_GCR_EVENTCONS_IDX 0x628 #define TI_GCR_CMDCONS_IDX 0x62C #define TI_GCR_TUNEPARMS 0x630 #define TI_GCR_RX_COAL_TICKS 0x630 #define TI_GCR_TX_COAL_TICKS 0x634 #define TI_GCR_STAT_TICKS 0x638 #define TI_GCR_TX_MAX_COAL_BD 0x63C #define TI_GCR_RX_MAX_COAL_BD 0x640 #define TI_GCR_NIC_TRACING 0x644 #define TI_GCR_GLINK 0x648 #define TI_GCR_LINK 0x64C #define TI_GCR_NICTRACE_PTR 0x650 #define TI_GCR_NICTRACE_START 0x654 #define TI_GCR_NICTRACE_LEN 0x658 #define TI_GCR_IFINDEX 0x65C #define TI_GCR_IFMTU 0x660 #define TI_GCR_MASK_INTRS 0x664 #define TI_GCR_GLINK_STAT 0x668 #define TI_GCR_LINK_STAT 0x66C #define TI_GCR_RXRETURNCONS_IDX 0x680 #define TI_GCR_CMDRING 0x700 #define TI_GCR_NIC_ADDR(x) (x - TI_GCR_BASE) /* * Local memory window. The local memory window is a 2K shared * memory region which can be used to access the NIC's internal * SRAM. The window can be mapped to a given 2K region using * the TI_WINDOW_BASE register. */ #define TI_WINDOW 0x800 #define TI_WINLEN 0x800 #define TI_TICKS_PER_SEC 1000000 /* * Operation mode register. */ #define TI_OPMODE_BYTESWAP_BD 0x00000002 #define TI_OPMODE_WORDSWAP_BD 0x00000004 #define TI_OPMODE_WARN_ENB 0x00000008 /* not yet implimented */ #define TI_OPMODE_BYTESWAP_DATA 0x00000010 #define TI_OPMODE_1_DMA_ACTIVE 0x00000040 #define TI_OPMODE_SBUS 0x00000100 #define TI_OPMODE_DONT_FRAG_JUMBO 0x00000200 #define TI_OPMODE_INCLUDE_CRC 0x00000400 #define TI_OPMODE_RX_BADFRAMES 0x00000800 #define TI_OPMODE_NO_EVENT_INTRS 0x00001000 #define TI_OPMODE_NO_TX_INTRS 0x00002000 #define TI_OPMODE_NO_RX_INTRS 0x00004000 #define TI_OPMODE_FATAL_ENB 0x40000000 /* not yet implimented */ #define TI_OPMODE_JUMBO_HDRSPLIT 0x00008000 /* * DMA configuration thresholds. */ #define TI_DMA_STATE_THRESH_16W 0x00000100 #define TI_DMA_STATE_THRESH_8W 0x00000080 #define TI_DMA_STATE_THRESH_4W 0x00000040 #define TI_DMA_STATE_THRESH_2W 0x00000020 #define TI_DMA_STATE_THRESH_1W 0x00000010 #define TI_DMA_STATE_FORCE_32_BIT 0x00000008 /* * Gigabit link status bits. */ #define TI_GLNK_SENSE_NO_BEG 0x00002000 #define TI_GLNK_LOOPBACK 0x00004000 #define TI_GLNK_PREF 0x00008000 #define TI_GLNK_1000MB 0x00040000 #define TI_GLNK_FULL_DUPLEX 0x00080000 #define TI_GLNK_TX_FLOWCTL_Y 0x00200000 /* Tigon 2 only */ #define TI_GLNK_RX_FLOWCTL_Y 0x00800000 #define TI_GLNK_AUTONEGENB 0x20000000 #define TI_GLNK_ENB 0x40000000 /* * Link status bits. */ #define TI_LNK_LOOPBACK 0x00004000 #define TI_LNK_PREF 0x00008000 #define TI_LNK_10MB 0x00010000 #define TI_LNK_100MB 0x00020000 #define TI_LNK_1000MB 0x00040000 #define TI_LNK_FULL_DUPLEX 0x00080000 #define TI_LNK_HALF_DUPLEX 0x00100000 #define TI_LNK_TX_FLOWCTL_Y 0x00200000 /* Tigon 2 only */ #define TI_LNK_RX_FLOWCTL_Y 0x00800000 #define TI_LNK_AUTONEGENB 0x20000000 #define TI_LNK_ENB 0x40000000 /* * Ring size constants. */ #define TI_EVENT_RING_CNT 256 #define TI_CMD_RING_CNT 64 #define TI_STD_RX_RING_CNT 512 #define TI_JUMBO_RX_RING_CNT 256 #define TI_MINI_RX_RING_CNT 1024 #define TI_RETURN_RING_CNT 2048 #define TI_MAXTXSEGS 32 #define TI_RING_ALIGN 32 #define TI_JUMBO_RING_ALIGN 64 /* * Possible TX ring sizes. */ #define TI_TX_RING_CNT_128 128 #define TI_TX_RING_BASE_128 0x3800 #define TI_TX_RING_CNT_256 256 #define TI_TX_RING_BASE_256 0x3000 #define TI_TX_RING_CNT_512 512 #define TI_TX_RING_BASE_512 0x2000 #define TI_TX_RING_CNT TI_TX_RING_CNT_512 #define TI_TX_RING_BASE TI_TX_RING_BASE_512 /* * The Tigon can have up to 8MB of external SRAM, however the Tigon 1 * is limited to 2MB total, and in general I think most adapters have * around 1MB. We use this value for zeroing the NIC's SRAM, so to * be safe we use the largest possible value (zeroing memory that * isn't there doesn't hurt anything). */ #define TI_MEM_MAX 0x7FFFFF /* * Maximum register address on the Tigon. */ #define TI_REG_MAX 0x3fff /* * These values were taken from Alteon's tg.h. */ #define TI_BEG_SRAM 0x0 /* host thinks it's here */ #define TI_BEG_SCRATCH 0xc00000 /* beg of scratch pad area */ #define TI_END_SRAM_II 0x800000 /* end of SRAM, for 2 MB stuffed */ #define TI_END_SCRATCH_II 0xc04000 /* end of scratch pad CPU A (16KB) */ #define TI_END_SCRATCH_B 0xc02000 /* end of scratch pad CPU B (8KB) */ #define TI_BEG_SCRATCH_B_DEBUG 0xd00000 /* beg of scratch pad for ioctl */ #define TI_END_SCRATCH_B_DEBUG 0xd02000 /* end of scratch pad for ioctl */ #define TI_SCRATCH_DEBUG_OFF 0x100000 /* offset for ioctl usage */ #define TI_END_SRAM_I 0x200000 /* end of SRAM, for 2 MB stuffed */ #define TI_END_SCRATCH_I 0xc00800 /* end of scratch pad area (2KB) */ #define TI_BEG_PROM 0x40000000 /* beg of PROM, special access */ #define TI_BEG_FLASH 0x80000000 /* beg of EEPROM, special access */ #define TI_END_FLASH 0x80100000 /* end of EEPROM for 1 MB stuff */ #define TI_BEG_SER_EEPROM 0xa0000000 /* beg of Serial EEPROM (fake out) */ #define TI_END_SER_EEPROM 0xa0002000 /* end of Serial EEPROM (fake out) */ #define TI_BEG_REGS 0xc0000000 /* beg of register area */ #define TI_END_REGS 0xc0000400 /* end of register area */ #define TI_END_WRITE_REGS 0xc0000180 /* can't write GPRs currently */ #define TI_BEG_REGS2 0xc0000200 /* beg of second writeable reg area */ /* the EEPROM is byte addressable in a pretty odd way */ #define EEPROM_BYTE_LOC 0xff000000 /* * From Alteon's tg.h. */ #define TI_PROCESSOR_A 0 #define TI_PROCESSOR_B 1 #define TI_CPU_A TG_PROCESSOR_A #define TI_CPU_B TG_PROCESSOR_B /* * Following macro can be used to access to any of the CPU registers * It will adjust the address appropriately. * Parameters: * reg - The register to access, e.g TI_CPU_CONTROL * cpu - cpu, i.e PROCESSOR_A or PROCESSOR_B (or TI_CPU_A or TI_CPU_B) */ #define CPU_REG(reg, cpu) ((reg) + (cpu) * 0x100) /* * Even on the alpha, pci addresses are 32-bit quantities */ typedef struct { uint32_t ti_addr_hi; uint32_t ti_addr_lo; } ti_hostaddr; #define TI_HOSTADDR(x) x.ti_addr_lo static __inline void ti_hostaddr64(ti_hostaddr *x, bus_addr_t addr) { uint64_t baddr; baddr = (uint64_t)addr; x->ti_addr_lo = baddr & 0xffffffff; x->ti_addr_hi = baddr >> 32; } /* * Ring control block structure. The rules for the max_len field * are as follows: * * For the send ring, max_len indicates the number of entries in the * ring (128, 256 or 512). * * For the standard receive ring, max_len indicates the threshold * used to decide when a frame should be put in the jumbo receive ring * instead of the standard one. * * For the mini ring, max_len indicates the size of the buffers in the * ring. This is the value used to decide when a frame is small enough * to be placed in the mini ring. * * For the return receive ring, max_len indicates the number of entries * in the ring. It can be one of 2048, 1024 or 0 (which is the same as * 2048 for backwards compatibility). The value 1024 can only be used * if the mini ring is disabled. */ struct ti_rcb { ti_hostaddr ti_hostaddr; #if BYTE_ORDER == BIG_ENDIAN uint16_t ti_max_len; uint16_t ti_flags; #else uint16_t ti_flags; uint16_t ti_max_len; #endif uint32_t ti_unused; }; #define TI_RCB_FLAG_TCP_UDP_CKSUM 0x00000001 #define TI_RCB_FLAG_IP_CKSUM 0x00000002 #define TI_RCB_FLAG_NO_PHDR_CKSUM 0x00000008 #define TI_RCB_FLAG_VLAN_ASSIST 0x00000010 #define TI_RCB_FLAG_COAL_UPD_ONLY 0x00000020 #define TI_RCB_FLAG_HOST_RING 0x00000040 #define TI_RCB_FLAG_IEEE_SNAP_CKSUM 0x00000080 #define TI_RCB_FLAG_USE_EXT_RX_BD 0x00000100 #define TI_RCB_FLAG_RING_DISABLED 0x00000200 struct ti_producer { uint32_t ti_idx; uint32_t ti_unused; }; /* * Tigon general information block. This resides in host memory * and contains the status counters, ring control blocks and * producer pointers. */ struct ti_gib { struct ti_stats ti_stats; struct ti_rcb ti_ev_rcb; struct ti_rcb ti_cmd_rcb; struct ti_rcb ti_tx_rcb; struct ti_rcb ti_std_rx_rcb; struct ti_rcb ti_jumbo_rx_rcb; struct ti_rcb ti_mini_rx_rcb; struct ti_rcb ti_return_rcb; ti_hostaddr ti_ev_prodidx_ptr; ti_hostaddr ti_return_prodidx_ptr; ti_hostaddr ti_tx_considx_ptr; ti_hostaddr ti_refresh_stats_ptr; }; /* * Buffer descriptor structures. There are basically three types * of structures: normal receive descriptors, extended receive * descriptors and transmit descriptors. The extended receive * descriptors are optionally used only for the jumbo receive ring. */ struct ti_rx_desc { ti_hostaddr ti_addr; #if BYTE_ORDER == BIG_ENDIAN uint16_t ti_idx; uint16_t ti_len; #else uint16_t ti_len; uint16_t ti_idx; #endif #if BYTE_ORDER == BIG_ENDIAN uint16_t ti_type; uint16_t ti_flags; #else uint16_t ti_flags; uint16_t ti_type; #endif #if BYTE_ORDER == BIG_ENDIAN uint16_t ti_ip_cksum; uint16_t ti_tcp_udp_cksum; #else uint16_t ti_tcp_udp_cksum; uint16_t ti_ip_cksum; #endif #if BYTE_ORDER == BIG_ENDIAN uint16_t ti_error_flags; uint16_t ti_vlan_tag; #else uint16_t ti_vlan_tag; uint16_t ti_error_flags; #endif uint32_t ti_rsvd; uint32_t ti_opaque; }; #define TI_STD_RX_RING_SZ (sizeof(struct ti_rx_desc) * TI_STD_RX_RING_CNT) #define TI_MINI_RX_RING_SZ (sizeof(struct ti_rx_desc) * TI_MINI_RX_RING_CNT) #define TI_RX_RETURN_RING_SZ (sizeof(struct ti_rx_desc) * TI_RETURN_RING_CNT) struct ti_rx_desc_ext { ti_hostaddr ti_addr1; ti_hostaddr ti_addr2; ti_hostaddr ti_addr3; #if BYTE_ORDER == BIG_ENDIAN uint16_t ti_len1; uint16_t ti_len2; #else uint16_t ti_len2; uint16_t ti_len1; #endif #if BYTE_ORDER == BIG_ENDIAN uint16_t ti_len3; uint16_t ti_rsvd0; #else uint16_t ti_rsvd0; uint16_t ti_len3; #endif ti_hostaddr ti_addr0; #if BYTE_ORDER == BIG_ENDIAN uint16_t ti_idx; uint16_t ti_len0; #else uint16_t ti_len0; uint16_t ti_idx; #endif #if BYTE_ORDER == BIG_ENDIAN uint16_t ti_type; uint16_t ti_flags; #else uint16_t ti_flags; uint16_t ti_type; #endif #if BYTE_ORDER == BIG_ENDIAN uint16_t ti_ip_cksum; uint16_t ti_tcp_udp_cksum; #else uint16_t ti_tcp_udp_cksum; uint16_t ti_ip_cksum; #endif #if BYTE_ORDER == BIG_ENDIAN uint16_t ti_error_flags; uint16_t ti_vlan_tag; #else uint16_t ti_vlan_tag; uint16_t ti_error_flags; #endif uint32_t ti_rsvd1; uint32_t ti_opaque; }; #ifdef TI_SF_BUF_JUMBO #define TI_JUMBO_RX_RING_SZ \ (sizeof(struct ti_rx_desc_ext) * TI_JUMBO_RX_RING_CNT) #else #define TI_JUMBO_RX_RING_SZ \ (sizeof(struct ti_rx_desc) * TI_JUMBO_RX_RING_CNT) #endif /* * Transmit descriptors are, mercifully, very small. */ struct ti_tx_desc { ti_hostaddr ti_addr; #if BYTE_ORDER == BIG_ENDIAN uint16_t ti_len; uint16_t ti_flags; #else uint16_t ti_flags; uint16_t ti_len; #endif #if BYTE_ORDER == BIG_ENDIAN uint16_t ti_rsvd; uint16_t ti_vlan_tag; #else uint16_t ti_vlan_tag; uint16_t ti_rsvd; #endif }; #define TI_TX_RING_SZ (sizeof(struct ti_tx_desc) * TI_TX_RING_CNT) /* * NOTE! On the Alpha, we have an alignment constraint. * The first thing in the packet is a 14-byte Ethernet header. * This means that the packet is misaligned. To compensate, * we actually offset the data 2 bytes into the cluster. This * aligns the packet after the Ethernet header at a 32-bit * boundary. */ #define TI_FRAMELEN 1518 #define TI_JUMBO_FRAMELEN 9018 #define TI_JUMBO_MTU (TI_JUMBO_FRAMELEN-ETHER_HDR_LEN-ETHER_CRC_LEN) #define TI_PAGE_SIZE PAGE_SIZE #define TI_MIN_FRAMELEN 60 /* * Buffer descriptor error flags. */ #define TI_BDERR_CRC 0x0001 #define TI_BDERR_COLLDETECT 0x0002 #define TI_BDERR_LINKLOST 0x0004 #define TI_BDERR_DECODE 0x0008 #define TI_BDERR_ODD_NIBBLES 0x0010 #define TI_BDERR_MAC_ABRT 0x0020 #define TI_BDERR_RUNT 0x0040 #define TI_BDERR_TRUNC 0x0080 #define TI_BDERR_GIANT 0x0100 /* * Buffer descriptor flags. */ #define TI_BDFLAG_TCP_UDP_CKSUM 0x0001 #define TI_BDFLAG_IP_CKSUM 0x0002 #define TI_BDFLAG_END 0x0004 #define TI_BDFLAG_MORE 0x0008 #define TI_BDFLAG_JUMBO_RING 0x0010 #define TI_BDFLAG_UCAST_PKT 0x0020 #define TI_BDFLAG_MCAST_PKT 0x0040 #define TI_BDFLAG_BCAST_PKT 0x0060 #define TI_BDFLAG_IP_FRAG 0x0080 #define TI_BDFLAG_IP_FRAG_END 0x0100 #define TI_BDFLAG_VLAN_TAG 0x0200 #define TI_BDFLAG_ERROR 0x0400 #define TI_BDFLAG_COAL_NOW 0x0800 #define TI_BDFLAG_MINI_RING 0x1000 /* * Descriptor type flags. I think these only have meaning for * the Tigon 1. I had to extract them from the sample driver source * since they aren't in the manual. */ #define TI_BDTYPE_TYPE_NULL 0x0000 #define TI_BDTYPE_SEND_BD 0x0001 #define TI_BDTYPE_RECV_BD 0x0002 #define TI_BDTYPE_RECV_JUMBO_BD 0x0003 #define TI_BDTYPE_RECV_BD_LAST 0x0004 #define TI_BDTYPE_SEND_DATA 0x0005 #define TI_BDTYPE_SEND_DATA_LAST 0x0006 #define TI_BDTYPE_RECV_DATA 0x0007 #define TI_BDTYPE_RECV_DATA_LAST 0x000b #define TI_BDTYPE_EVENT_RUPT 0x000c #define TI_BDTYPE_EVENT_NO_RUPT 0x000d #define TI_BDTYPE_ODD_START 0x000e #define TI_BDTYPE_UPDATE_STATS 0x000f #define TI_BDTYPE_SEND_DUMMY_DMA 0x0010 #define TI_BDTYPE_EVENT_PROD 0x0011 #define TI_BDTYPE_TX_CONS 0x0012 #define TI_BDTYPE_RX_PROD 0x0013 #define TI_BDTYPE_REFRESH_STATS 0x0014 #define TI_BDTYPE_SEND_DATA_LAST_VLAN 0x0015 #define TI_BDTYPE_SEND_DATA_COAL 0x0016 #define TI_BDTYPE_SEND_DATA_LAST_COAL 0x0017 #define TI_BDTYPE_SEND_DATA_LAST_VLAN_COAL 0x0018 #define TI_BDTYPE_TX_CONS_NO_INTR 0x0019 /* * Tigon command structure. */ struct ti_cmd_desc { uint32_t ti_cmdx; }; #define TI_CMD_CMD(cmd) (((((cmd)->ti_cmdx)) >> 24) & 0xff) #define TI_CMD_CODE(cmd) (((((cmd)->ti_cmdx)) >> 12) & 0xfff) #define TI_CMD_IDX(cmd) ((((cmd)->ti_cmdx)) & 0xfff) #define TI_CMD_HOST_STATE 0x01 #define TI_CMD_CODE_STACK_UP 0x01 #define TI_CMD_CODE_STACK_DOWN 0x02 /* * This command enables software address filtering. It's a workaround * for a bug in the Tigon 1 and not implemented for the Tigon 2. */ #define TI_CMD_FDR_FILTERING 0x02 #define TI_CMD_CODE_FILT_ENB 0x01 #define TI_CMD_CODE_FILT_DIS 0x02 #define TI_CMD_SET_RX_PROD_IDX 0x03 /* obsolete */ #define TI_CMD_UPDATE_GENCOM 0x04 #define TI_CMD_RESET_JUMBO_RING 0x05 #define TI_CMD_SET_PARTIAL_RX_CNT 0x06 #define TI_CMD_ADD_MCAST_ADDR 0x08 /* obsolete */ #define TI_CMD_DEL_MCAST_ADDR 0x09 /* obsolete */ #define TI_CMD_SET_PROMISC_MODE 0x0A #define TI_CMD_CODE_PROMISC_ENB 0x01 #define TI_CMD_CODE_PROMISC_DIS 0x02 #define TI_CMD_LINK_NEGOTIATION 0x0B #define TI_CMD_CODE_NEGOTIATE_BOTH 0x00 #define TI_CMD_CODE_NEGOTIATE_GIGABIT 0x01 #define TI_CMD_CODE_NEGOTIATE_10_100 0x02 #define TI_CMD_SET_MAC_ADDR 0x0C #define TI_CMD_CLR_PROFILE 0x0D #define TI_CMD_SET_ALLMULTI 0x0E #define TI_CMD_CODE_ALLMULTI_ENB 0x01 #define TI_CMD_CODE_ALLMULTI_DIS 0x02 #define TI_CMD_CLR_STATS 0x0F #define TI_CMD_SET_RX_JUMBO_PROD_IDX 0x10 /* obsolete */ #define TI_CMD_RFRSH_STATS 0x11 #define TI_CMD_EXT_ADD_MCAST 0x12 #define TI_CMD_EXT_DEL_MCAST 0x13 /* * Utility macros to make issuing commands a little simpler. Assumes * that 'sc' and 'cmd' are in local scope. */ #define TI_DO_CMD(x, y, z) do { \ cmd.ti_cmdx = (((x) << 24) | ((y) << 12) | ((z))); \ ti_cmd(sc, &cmd); \ } while(0) #define TI_DO_CMD_EXT(x, y, z, v, w) do { \ cmd.ti_cmdx = (((x) << 24) | ((y) << 12) | ((z))); \ ti_cmd_ext(sc, &cmd, (v), (w)); \ } while(0) /* * Other utility macros. */ #define TI_INC(x, y) (x) = ((x) + 1) % y #define TI_UPDATE_JUMBOPROD(x, y) do { \ if ((x)->ti_hwrev == TI_HWREV_TIGON) \ TI_DO_CMD(TI_CMD_SET_RX_JUMBO_PROD_IDX, 0, (y)); \ else \ CSR_WRITE_4((x), TI_MB_JUMBORXPROD_IDX, (y)); \ } while(0) #define TI_UPDATE_MINIPROD(x, y) \ CSR_WRITE_4((x), TI_MB_MINIRXPROD_IDX, (y)) #define TI_UPDATE_STDPROD(x, y) do { \ if ((x)->ti_hwrev == TI_HWREV_TIGON) \ TI_DO_CMD(TI_CMD_SET_RX_PROD_IDX, 0, (y)); \ else \ CSR_WRITE_4((x), TI_MB_STDRXPROD_IDX, (y)); \ } while(0) /* * Tigon event structure. */ struct ti_event_desc { uint32_t ti_eventx; uint32_t ti_rsvd; }; #define TI_EVENT_RING_SZ (sizeof(struct ti_event_desc) * TI_EVENT_RING_CNT) #define TI_EVENT_EVENT(e) (((((e)->ti_eventx)) >> 24) & 0xff) #define TI_EVENT_CODE(e) (((((e)->ti_eventx)) >> 12) & 0xfff) #define TI_EVENT_IDX(e) (((((e)->ti_eventx))) & 0xfff) /* * Tigon events. */ #define TI_EV_FIRMWARE_UP 0x01 #define TI_EV_STATS_UPDATED 0x04 #define TI_EV_LINKSTAT_CHANGED 0x06 #define TI_EV_CODE_GIG_LINK_UP 0x01 #define TI_EV_CODE_LINK_DOWN 0x02 #define TI_EV_CODE_LINK_UP 0x03 #define TI_EV_ERROR 0x07 #define TI_EV_CODE_ERR_INVAL_CMD 0x01 #define TI_EV_CODE_ERR_UNIMP_CMD 0x02 #define TI_EV_CODE_ERR_BADCFG 0x03 #define TI_EV_MCAST_UPDATED 0x08 #define TI_EV_CODE_MCAST_ADD 0x01 #define TI_EV_CODE_MCAST_DEL 0x02 #define TI_EV_RESET_JUMBO_RING 0x09 /* * Register access macros. The Tigon always uses memory mapped register * accesses and all registers must be accessed with 32 bit operations. */ #define CSR_WRITE_4(sc, reg, val) \ bus_space_write_4((sc)->ti_btag, (sc)->ti_bhandle, (reg), (val)) #define CSR_READ_4(sc, reg) \ bus_space_read_4((sc)->ti_btag, (sc)->ti_bhandle, (reg)) #define TI_SETBIT(sc, reg, x) \ CSR_WRITE_4((sc), (reg), (CSR_READ_4((sc), (reg)) | (x))) #define TI_CLRBIT(sc, reg, x) \ CSR_WRITE_4((sc), (reg), (CSR_READ_4((sc), (reg)) & ~(x))) struct ti_txdesc { struct mbuf *tx_m; bus_dmamap_t tx_dmamap; STAILQ_ENTRY(ti_txdesc) tx_q; }; STAILQ_HEAD(ti_txdq, ti_txdesc); struct ti_status { /* * Make sure producer structures are aligned on 32-byte cache * line boundaries. We can create separate DMA area for each * producer/consumer area but it wouldn't get much benefit * since driver use a global driver lock. */ struct ti_producer ti_ev_prodidx_r; uint32_t ti_pad0[6]; struct ti_producer ti_return_prodidx_r; uint32_t ti_pad1[6]; struct ti_producer ti_tx_considx_r; uint32_t ti_pad2[6]; }; /* * Ring structures. Most of these reside in host memory and we tell * the NIC where they are via the ring control blocks. The exceptions * are the tx and command rings, which live in NIC memory and which * we access via the shared memory window. */ struct ti_ring_data { struct ti_gib *ti_info; bus_addr_t ti_info_paddr; struct ti_status *ti_status; bus_addr_t ti_status_paddr; struct ti_rx_desc *ti_rx_std_ring; bus_addr_t ti_rx_std_ring_paddr; #ifdef TI_SF_BUF_JUMBO struct ti_rx_desc_ext *ti_rx_jumbo_ring; #else struct ti_rx_desc *ti_rx_jumbo_ring; #endif bus_addr_t ti_rx_jumbo_ring_paddr; struct ti_rx_desc *ti_rx_mini_ring; bus_addr_t ti_rx_mini_ring_paddr; struct ti_rx_desc *ti_rx_return_ring; bus_addr_t ti_rx_return_ring_paddr; struct ti_event_desc *ti_event_ring; bus_addr_t ti_event_ring_paddr; struct ti_tx_desc *ti_tx_ring; bus_addr_t ti_tx_ring_paddr; }; /* * Mbuf pointers. We need these to keep track of the virtual addresses * of our mbuf chains since we can only convert from physical to virtual, * not the other way around. */ struct ti_chain_data { bus_dma_tag_t ti_parent_tag; bus_dma_tag_t ti_gib_tag; bus_dmamap_t ti_gib_map; bus_dma_tag_t ti_event_ring_tag; bus_dmamap_t ti_event_ring_map; bus_dma_tag_t ti_status_tag; bus_dmamap_t ti_status_map; bus_dma_tag_t ti_tx_ring_tag; bus_dmamap_t ti_tx_ring_map; bus_dma_tag_t ti_tx_tag; struct ti_txdesc ti_txdesc[TI_TX_RING_CNT]; struct ti_txdq ti_txfreeq; struct ti_txdq ti_txbusyq; bus_dma_tag_t ti_rx_return_ring_tag; bus_dmamap_t ti_rx_return_ring_map; bus_dma_tag_t ti_rx_std_ring_tag; bus_dmamap_t ti_rx_std_ring_map; bus_dma_tag_t ti_rx_std_tag; struct mbuf *ti_rx_std_chain[TI_STD_RX_RING_CNT]; bus_dmamap_t ti_rx_std_maps[TI_STD_RX_RING_CNT]; bus_dmamap_t ti_rx_std_sparemap; bus_dma_tag_t ti_rx_jumbo_ring_tag; bus_dmamap_t ti_rx_jumbo_ring_map; bus_dma_tag_t ti_rx_jumbo_tag; struct mbuf *ti_rx_jumbo_chain[TI_JUMBO_RX_RING_CNT]; bus_dmamap_t ti_rx_jumbo_maps[TI_JUMBO_RX_RING_CNT]; bus_dmamap_t ti_rx_jumbo_sparemap; bus_dma_tag_t ti_rx_mini_ring_tag; bus_dmamap_t ti_rx_mini_ring_map; bus_dma_tag_t ti_rx_mini_tag; struct mbuf *ti_rx_mini_chain[TI_MINI_RX_RING_CNT]; bus_dmamap_t ti_rx_mini_maps[TI_MINI_RX_RING_CNT]; bus_dmamap_t ti_rx_mini_sparemap; }; struct ti_type { uint16_t ti_vid; uint16_t ti_did; const char *ti_name; }; #define TI_HWREV_TIGON 0x01 #define TI_HWREV_TIGON_II 0x02 #define TI_TIMEOUT 1000 #define TI_TXCONS_UNSET 0xFFFF /* impossible value */ struct ti_mc_entry { struct ether_addr mc_addr; SLIST_ENTRY(ti_mc_entry) mc_entries; }; typedef enum { TI_FLAG_NONE = 0x00, TI_FLAG_DEBUGING = 0x01, TI_FLAG_WAIT_FOR_LINK = 0x02 } ti_flag_vals; struct ti_softc { device_t ti_dev; struct ifnet *ti_ifp; bus_space_handle_t ti_bhandle; bus_space_tag_t ti_btag; void *ti_intrhand; struct resource *ti_irq; struct resource *ti_res; struct ifmedia ifmedia; /* media info */ uint8_t ti_hwrev; /* Tigon rev (1 or 2) */ uint8_t ti_copper; /* 1000baseTX card */ uint8_t ti_linkstat; /* Link state */ int ti_hdrsplit; /* enable header splitting */ int ti_dac; struct ti_ring_data ti_rdata; /* rings */ struct ti_chain_data ti_cdata; /* mbufs */ #define ti_ev_prodidx ti_rdata.ti_status->ti_ev_prodidx_r #define ti_return_prodidx ti_rdata.ti_status->ti_return_prodidx_r #define ti_tx_considx ti_rdata.ti_status->ti_tx_considx_r int ti_tx_saved_prodidx; int ti_tx_saved_considx; int ti_rx_saved_considx; int ti_ev_saved_considx; int ti_cmd_saved_prodidx; int ti_std; /* current std ring head */ int ti_mini; /* current mini ring head */ int ti_jumbo; /* current jumo ring head */ SLIST_HEAD(__ti_mchead, ti_mc_entry) ti_mc_listhead; uint32_t ti_stat_ticks; uint32_t ti_rx_coal_ticks; uint32_t ti_tx_coal_ticks; uint32_t ti_rx_max_coal_bds; uint32_t ti_tx_max_coal_bds; uint32_t ti_tx_buf_ratio; int ti_if_flags; int ti_txcnt; struct mtx ti_mtx; struct callout ti_watchdog; int ti_timer; ti_flag_vals ti_flags; uint8_t *ti_membuf; uint8_t *ti_membuf2; struct cdev *dev; }; #define TI_LOCK(_sc) mtx_lock(&(_sc)->ti_mtx) #define TI_UNLOCK(_sc) mtx_unlock(&(_sc)->ti_mtx) #define TI_LOCK_ASSERT(_sc) mtx_assert(&(_sc)->ti_mtx, MA_OWNED) /* * Microchip Technology 24Cxx EEPROM control bytes */ #define EEPROM_CTL_READ 0xA1 /* 0101 0001 */ #define EEPROM_CTL_WRITE 0xA0 /* 0101 0000 */ /* * Note that EEPROM_START leaves transmission enabled. */ #define EEPROM_START do { \ TI_SETBIT(sc, TI_MISC_LOCAL_CTL, TI_MLC_EE_CLK); /* Pull clock pin high */\ TI_SETBIT(sc, TI_MISC_LOCAL_CTL, TI_MLC_EE_DOUT); /* Set DATA bit to 1 */ \ TI_SETBIT(sc, TI_MISC_LOCAL_CTL, TI_MLC_EE_TXEN); /* Enable xmit to write bit */\ TI_CLRBIT(sc, TI_MISC_LOCAL_CTL, TI_MLC_EE_DOUT); /* Pull DATA bit to 0 again */\ TI_CLRBIT(sc, TI_MISC_LOCAL_CTL, TI_MLC_EE_CLK); /* Pull clock low again */ \ } while(0) /* * EEPROM_STOP ends access to the EEPROM and clears the ETXEN bit so * that no further data can be written to the EEPROM I/O pin. */ #define EEPROM_STOP do { \ TI_CLRBIT(sc, TI_MISC_LOCAL_CTL, TI_MLC_EE_TXEN); /* Disable xmit */ \ TI_CLRBIT(sc, TI_MISC_LOCAL_CTL, TI_MLC_EE_DOUT); /* Pull DATA to 0 */ \ TI_SETBIT(sc, TI_MISC_LOCAL_CTL, TI_MLC_EE_CLK); /* Pull clock high */ \ TI_SETBIT(sc, TI_MISC_LOCAL_CTL, TI_MLC_EE_TXEN); /* Enable xmit */ \ TI_SETBIT(sc, TI_MISC_LOCAL_CTL, TI_MLC_EE_DOUT); /* Toggle DATA to 1 */ \ TI_CLRBIT(sc, TI_MISC_LOCAL_CTL, TI_MLC_EE_TXEN); /* Disable xmit. */ \ TI_CLRBIT(sc, TI_MISC_LOCAL_CTL, TI_MLC_EE_CLK); /* Pull clock low again */ \ } while(0)