Copyright (c) 1992-2007 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 7.0-CURRENT #7: Sun Jan 7 12:33:42 CET 2007 stefan@lizard.fafoe.narf.at:/usr/home/stefan/freebsd/obj/usr/home/stefan/freebsd/src/sys/MINIMAL Using 64 colors for the VM-PQ tuning (2048, 8) Preloaded elf kernel "/boot/kernel.minimal/kernel" at 0xc072c000. Preloaded acpi_dsdt "/boot/DSDT.aml" at 0xc072c1d8. Preloaded elf module "/boot/kernel.minimal/acpi.ko" at 0xc072c21c. Calibrating clock(s) ... i8254 clock: 1193240 Hz CLK_USE_I8254_CALIBRATION not specified - using default frequency Timecounter "i8254" frequency 1193182 Hz quality 0 Calibrating TSC clock ... TSC clock: 2261163082 Hz CPU: Intel(R) Pentium(R) M processor 2.26GHz (2261.16-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x6d8 Stepping = 8 Features=0xafe9fbff Features2=0x180 AMD Features=0x100000 Instruction TLB: 4 KB Pages, 4-way set associative, 128 entries Data TLB: 4 KB Pages, 4-way set associative, 128 entries Instruction TLB: 4 MB pages, fully associative, 2 entries 2nd-level cache: 2-MB, 8-way set associative, 64-byte line size 1st-level instruction cache: 32 KB, 8-way set associative, 64 byte line size Data TLB: 4 MB Pages, 4-way set associative, 8 entries 1st-level data cache: 32 KB, 8-way set associative, 64 byte line size L2 cache: 2048 kbytes, 8-way associative, 64 bytes/line real memory = 2147319808 (2047 MB) Physical memory chunk(s): 0x0000000000001000 - 0x000000000009efff, 647168 bytes (158 pages) 0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages) 0x0000000000825000 - 0x000000007db88fff, 2100707328 bytes (512868 pages) avail memory = 2100432896 (2003 MB) Table 'FACP' at 0x7ffd9400 Table 'APIC' at 0x7ffd9c00 MADT: Found table at 0x7ffd9c00 APIC: Using the MADT enumerator. MADT: Found CPU APIC ID 0 ACPI ID 0: enabled MADT: Found CPU APIC ID 1 ACPI ID 1: disabled ACPI APIC Table: bios32: Found BIOS32 Service Directory header at 0xc00ffe80 bios32: Entry = 0xffe90 (c00ffe90) Rev = 0 Len = 1 pcibios: PCI BIOS entry at 0xf0000+0xb5be pnpbios: Found PnP BIOS data at 0xc00fe2d0 pnpbios: Entry = f0000:e2f4 Rev = 1.0 pnpbios: Event flag at 4b4 Other BIOS signatures found: APIC: CPU 0 has ACPI ID 0 ACPI-0390: *** Info: Table [SSDT] replaced by host OS ACPI-0390: *** Info: Table [SSDT] replaced by host OS ACPI-0390: *** Info: Table [SSDT] replaced by host OS ACPI: overriding DSDT/SSDT with custom table ACPI-0390: *** Info: Table [DSDT] replaced by host OS MADT: Found IO APIC ID 1, Interrupt 0 at 0xfec00000 ioapic0: Changing APIC ID to 1 ioapic0: Routing external 8259A's -> intpin 0 MADT: Interrupt override: source 0, irq 2 ioapic0: Routing IRQ 0 -> intpin 2 MADT: Interrupt override: source 9, irq 9 ioapic0: intpin 9 trigger: level lapic0: Routing NMI -> LINT1 lapic0: LINT1 trigger: edge lapic0: LINT1 polarity: high MADT: Ignoring local NMI routed to ACPI CPU 1 ioapic0 irqs 0-23 on motherboard cpu0 BSP: ID: 0x00000000 VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff timer: 0x000100ef therm: 0x00010000 err: 0x00010000 pcm: 0x00010000 wlan: <802.11 Link Layer> mem: Pentium Pro MTRR support enabled null: random: io: npx0: INT 16 interface acpi0: on motherboard ioapic0: routing intpin 9 (ISA IRQ 9) to vector 48 acpi0: [MPSAFE] pci_open(1): mode 1 addr port (0x0cf8) is 0x8000eac4 pci_open(1a): mode1res=0x80000000 (0x80000000) pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=25908086) pcibios: BIOS version 2.10 acpi_bus_number: root bus has no _BBN, assuming 0 AcpiOsDerivePciId: bus 0 dev 31 func 0 acpi_bus_number: root bus has no _BBN, assuming 0 AcpiOsDerivePciId: bus 0 dev 31 func 0 acpi0: wakeup code va 0xd887b000 pa 0x9d000 ACPI timer: 1/2 1/2 1/1 1/2 1/1 1/1 1/1 1/2 1/1 1/2 -> 10 Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0 pci_link0: Index IRQ Rtd Ref IRQs Initial Probe 0 11 N 0 9 10 11 Validation 0 11 N 0 9 10 11 After Disable 0 255 N 0 9 10 11 pci_link1: Index IRQ Rtd Ref IRQs Initial Probe 0 10 N 0 5 7 Validation 0 255 N 0 5 7 After Disable 0 255 N 0 5 7 pci_link2: Index IRQ Rtd Ref IRQs Initial Probe 0 9 N 0 9 10 11 Validation 0 9 N 0 9 10 11 After Disable 0 255 N 0 9 10 11 pci_link3: Index IRQ Rtd Ref IRQs Initial Probe 0 5 N 0 5 7 9 10 11 Validation 0 5 N 0 5 7 9 10 11 After Disable 0 255 N 0 5 7 9 10 11 pci_link4: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 3 4 5 6 7 9 10 11 12 14 15 Validation 0 255 N 0 3 4 5 6 7 9 10 11 12 14 15 After Disable 0 255 N 0 3 4 5 6 7 9 10 11 12 14 15 pci_link5: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 3 4 5 6 7 9 10 11 12 14 15 Validation 0 255 N 0 3 4 5 6 7 9 10 11 12 14 15 After Disable 0 255 N 0 3 4 5 6 7 9 10 11 12 14 15 pci_link6: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 3 4 5 6 7 9 10 11 12 14 15 Validation 0 255 N 0 3 4 5 6 7 9 10 11 12 14 15 After Disable 0 255 N 0 3 4 5 6 7 9 10 11 12 14 15 cpu0: on acpi0 acpi_perf0: on cpu0 acpi_perf0: failed in PERF_STATUS attach device_attach: acpi_perf0 attach returned 6 acpi_perf0: on cpu0 acpi_perf0: failed in PERF_STATUS attach device_attach: acpi_perf0 attach returned 6 acpi_throttle0: on cpu0 acpi_throttle0: P_CNT from P_BLK 0x10e0 acpi_acad0: on acpi0 battery0: on acpi0 battery1: on acpi0 acpi_lid0: on acpi0 acpi_button0: on acpi0 acpi_button1: on acpi0 pcib0: port 0xcf8-0xcff on acpi0 pci0: on pcib0 pci0: physical bus=0 found-> vendor=0x8086, dev=0x2590, revid=0x03 bus=0, slot=0, func=0 class=06-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0006, statreg=0x0090, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x2591, revid=0x03 bus=0, slot=1, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0107, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x0a (2500 ns), maxlat=0x00 (0 ns) intpin=a, irq=255 powerspec 2 supports D0 D3 current D0 MSI supports 1 message found-> vendor=0x8086, dev=0x2660, revid=0x03 bus=0, slot=28, func=0 class=06-04-00, hdrtype=0x01, mfdev=1 cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x02 (500 ns), maxlat=0x00 (0 ns) intpin=a, irq=255 powerspec 2 supports D0 D3 current D0 MSI supports 1 message found-> vendor=0x8086, dev=0x2658, revid=0x03 bus=0, slot=29, func=0 class=0c-03-00, hdrtype=0x00, mfdev=1 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 map[20]: type 4, range 32, base 0xbf80, size 5, enabled pcib0: matched entry for 0.29.INTA pcib0: slot 29 INTA hardwired to IRQ 16 found-> vendor=0x8086, dev=0x2659, revid=0x03 bus=0, slot=29, func=1 class=0c-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=10 map[20]: type 4, range 32, base 0xbf60, size 5, enabled pcib0: matched entry for 0.29.INTB pcib0: slot 29 INTB hardwired to IRQ 17 found-> vendor=0x8086, dev=0x265a, revid=0x03 bus=0, slot=29, func=2 class=0c-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=c, irq=9 map[20]: type 4, range 32, base 0xbf40, size 5, enabled pcib0: matched entry for 0.29.INTC pcib0: slot 29 INTC hardwired to IRQ 18 found-> vendor=0x8086, dev=0x265b, revid=0x03 bus=0, slot=29, func=3 class=0c-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=d, irq=5 map[20]: type 4, range 32, base 0xbf20, size 5, enabled pcib0: matched entry for 0.29.INTD pcib0: slot 29 INTD hardwired to IRQ 19 found-> vendor=0x8086, dev=0x265c, revid=0x03 bus=0, slot=29, func=7 class=0c-03-20, hdrtype=0x00, mfdev=0 cmdreg=0x0106, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 powerspec 2 supports D0 D3 current D0 map[10]: type 1, range 32, base 0xffa80800, size 10, enabled pcib0: matched entry for 0.29.INTA pcib0: slot 29 INTA hardwired to IRQ 16 found-> vendor=0x8086, dev=0x2448, revid=0xd3 bus=0, slot=30, func=0 class=06-04-01, hdrtype=0x01, mfdev=1 cmdreg=0x0107, statreg=0x0010, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x02 (500 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x266e, revid=0x03 bus=0, slot=30, func=2 class=04-01-00, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 powerspec 2 supports D0 D3 current D0 map[10]: type 4, range 32, base 0xed00, size 8, enabled map[14]: type 4, range 32, base 0xec40, size 6, enabled map[18]: type 1, range 32, base 0xdffffe00, size 9, enabled map[1c]: type 1, range 32, base 0xdffffd00, size 8, enabled pcib0: matched entry for 0.30.INTA pcib0: slot 30 INTA hardwired to IRQ 16 found-> vendor=0x8086, dev=0x266d, revid=0x03 bus=0, slot=30, func=3 class=07-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=10 powerspec 2 supports D0 D3 current D0 map[10]: type 4, range 32, base 0xee00, size 8, enabled map[14]: type 4, range 32, base 0xec80, size 7, enabled pcib0: matched entry for 0.30.INTB pcib0: slot 30 INTB hardwired to IRQ 17 found-> vendor=0x8086, dev=0x2641, revid=0x03 bus=0, slot=31, func=0 class=06-01-00, hdrtype=0x00, mfdev=1 cmdreg=0x0107, statreg=0x0200, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x2653, revid=0x03 bus=0, slot=31, func=2 class=01-01-80, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x02b0, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=10 powerspec 2 supports D0 D3 current D0 map[20]: type 4, range 32, base 0xbfa0, size 4, enabled pcib0: matched entry for 0.31.INTB pcib0: slot 31 INTB hardwired to IRQ 17 pcib1: at device 1.0 on pci0 pcib1: secondary bus 1 pcib1: subordinate bus 1 pcib1: I/O decode 0xf000-0xfff pcib1: memory decode 0xdd000000-0xdfefffff pcib1: prefetched decode 0xc0000000-0xcfffffff pci1: on pcib1 pci1: physical bus=1 found-> vendor=0x10de, dev=0x00cc, revid=0xa2 bus=1, slot=0, func=0 class=03-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 powerspec 2 supports D0 D3 current D0 MSI supports 1 message, 64 bit map[10]: type 1, range 32, base 0xdd000000, size 24, enabled pcib1: requested memory range 0xdd000000-0xddffffff: good map[14]: type 3, range 64, base 0xc0000000, size 28, enabled pcib1: requested memory range 0xc0000000-0xcfffffff: good map[1c]: type 1, range 64, base 0xde000000, size 24, enabled pcib1: requested memory range 0xde000000-0xdeffffff: good pcib1: matched entry for 1.0.INTA pcib1: slot 0 INTA hardwired to IRQ 16 vgapci0: mem 0xdd000000-0xddffffff,0xc0000000-0xcfffffff,0xde000000-0xdeffffff irq 16 at device 0.0 on pci1 pcib2: at device 28.0 on pci0 pcib2: secondary bus 2 pcib2: subordinate bus 2 pcib2: I/O decode 0xf000-0xfff pcib2: memory decode 0xdcf00000-0xdcffffff pcib2: no prefetched decode pcib2: could not get PCI interrupt routing table for \\_SB_.PCI0.PXP0 - AE_NOT_FOUND pci2: on pcib2 pci2: physical bus=2 pci2:0:0: bad VPD cksum, remain 14 found-> vendor=0x14e4, dev=0x1677, revid=0x01 bus=2, slot=0, func=0 class=02-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0106, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 powerspec 2 supports D0 D3 current D0 VPD Ident: Broadcom NetXtreme Gigabit Ethernet Controller MSI supports 8 messages, 64 bit map[10]: type 1, range 64, base 0xdcff0000, size 16, enabled pcib2: requested memory range 0xdcff0000-0xdcffffff: good pcib0: matched entry for 0.28.INTA pcib0: slot 28 INTA hardwired to IRQ 16 pcib2: slot 0 INTA is routed to irq 16 pci2: at device 0.0 (no driver attached) pci0: at device 29.0 (no driver attached) pci0: at device 29.1 (no driver attached) pci0: at device 29.2 (no driver attached) pci0: at device 29.3 (no driver attached) pci0: at device 29.7 (no driver attached) pcib3: at device 30.0 on pci0 pcib3: secondary bus 3 pcib3: subordinate bus 4 pcib3: I/O decode 0xf000-0xfff pcib3: memory decode 0xdce00000-0xdcefffff pcib3: no prefetched decode pcib3: Subtractively decoded bridge. pci3: on pcib3 pci3: physical bus=3 found-> vendor=0x104c, dev=0x8036, revid=0x00 bus=3, slot=1, func=0 class=06-07-00, hdrtype=0x02, mfdev=1 cmdreg=0x0000, statreg=0x0210, cachelnsz=16 (dwords) lattimer=0x40 (1920 ns), mingnt=0x40 (16000 ns), maxlat=0x07 (1750 ns) intpin=a, irq=255 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type 1, range 32, base 0, size 12, memory disabled found-> vendor=0x104c, dev=0x8038, revid=0x00 bus=3, slot=1, func=5 class=07-80-00, hdrtype=0x00, mfdev=1 cmdreg=0x0102, statreg=0x0210, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=5 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type 1, range 32, base 0xdcefd000, size 12, enabled pcib3: requested memory range 0xdcefd000-0xdcefdfff: good map[14]: type 1, range 32, base 0xdcefe000, size 12, enabled pcib3: requested memory range 0xdcefe000-0xdcefefff: good pcib3: matched entry for 3.1.INTA pcib3: slot 1 INTA hardwired to IRQ 19 found-> vendor=0x8086, dev=0x4220, revid=0x05 bus=3, slot=3, func=0 class=02-80-00, hdrtype=0x00, mfdev=0 cmdreg=0x0116, statreg=0x0290, cachelnsz=16 (dwords) lattimer=0x40 (1920 ns), mingnt=0x03 (750 ns), maxlat=0x18 (6000 ns) intpin=a, irq=10 powerspec 2 supports D0 D3 current D0 map[10]: type 1, range 32, base 0xdceff000, size 12, enabled pcib3: requested memory range 0xdceff000-0xdcefffff: good pcib3: matched entry for 3.3.INTA pcib3: slot 3 INTA hardwired to IRQ 17 pci3: at device 1.0 (no driver attached) pci3: at device 1.5 (no driver attached) iwi0: mem 0xdceff000-0xdcefffff irq 17 at device 3.0 on pci3 iwi0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xdceff000 iwi0: using obsoleted if_watchdog interface iwi0: bpf attached iwi0: Ethernet address: xx:xx:xx:xx:xx:xx iwi0: bpf attached iwi0: bpf attached ioapic0: routing intpin 17 (PCI IRQ 17) to vector 49 iwi0: [MPSAFE] iwi0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps iwi0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps pci0: at device 30.2 (no driver attached) pci0: at device 30.3 (no driver attached) isab0: at device 31.0 on pci0 isa0: on isab0 atapci0: port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xbfa0-0xbfaf irq 17 at device 31.2 on pci0 atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0xbfa0 ata0: on atapci0 atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0 atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6 ata0: reset tp1 mask=03 ostat0=50 ostat1=00 ata0: stat0=0x50 err=0x01 lsb=0x00 msb=0x00 ata0: stat1=0x00 err=0x01 lsb=0x00 msb=0x00 ata0: reset tp2 stat0=50 stat1=00 devices=0x1 ioapic0: routing intpin 14 (ISA IRQ 14) to vector 50 ata0: [MPSAFE] ata1: on atapci0 atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170 atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376 ata1: reset tp1 mask=03 ostat0=50 ostat1=00 ata1: stat0=0x00 err=0x01 lsb=0x14 msb=0xeb ata1: stat1=0x00 err=0x00 lsb=0x00 msb=0x00 ata1: reset tp2 stat0=00 stat1=00 devices=0x4 ioapic0: routing intpin 15 (ISA IRQ 15) to vector 51 ata1: [MPSAFE] acpi_tz0: on acpi0 atkbdc0: port 0x60,0x64,0x62,0x66 irq 1 on acpi0 atkbd0: irq 1 on atkbdc0 atkbd: the current kbd controller command byte 0065 atkbd: keyboard ID 0x41ab (2) kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000 ioapic0: routing intpin 1 (ISA IRQ 1) to vector 52 atkbd0: [GIANT-LOCKED] sio0: irq maps: 0x8e21 0x8e31 0x8e21 0x8e21 sio0: irq maps: 0x8e21 0x8e31 0x8e21 0x8e21 sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 sio0: type 16550A ioapic0: routing intpin 4 (ISA IRQ 4) to vector 53 sio0: [FAST] ata: ata0 already exists; skipping it ata: ata1 already exists; skipping it atkbdc: atkbdc0 already exists; skipping it sio: sio0 already exists; skipping it pnp_identify: Trying Read_Port at 203 pnp_identify: Trying Read_Port at 243 pnp_identify: Trying Read_Port at 283 pnp_identify: Trying Read_Port at 2c3 pnp_identify: Trying Read_Port at 303 pnp_identify: Trying Read_Port at 343 pnp_identify: Trying Read_Port at 383 pnp_identify: Trying Read_Port at 3c3 PNP Identify complete sc: sc0 already exists; skipping it vga: vga0 already exists; skipping it isa_probe_children: disabling PnP devices isa_probe_children: probing non-PnP devices pmtimer0 on isa0 orm0: at iomem 0xc0000-0xcffff pnpid ORM0000 on isa0 adv0: not probed (disabled) aha0: not probed (disabled) aic0: not probed (disabled) bt0: not probed (disabled) cs0: not probed (disabled) ed0: not probed (disabled) fdc0 failed to probe at port 0x3f0 irq 6 drq 2 on isa0 fe0: not probed (disabled) ie0: not probed (disabled) le0: not probed (disabled) ppc0 failed to probe at irq 7 on isa0 fb: new array size 4 sc0: at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sc0: fb0, kbd0, terminal emulator: sc (syscons terminal) sio1: configured irq 3 not in bitmap of probed irqs 0 sio1: port may not be enabled sio1: irq maps: 0x8e21 0x8e21 0x8e21 0x8e21 sio1: probe failed test(s): 0 1 2 4 6 7 9 sio1 failed to probe at port 0x2f8-0x2ff irq 3 on isa0 sio2: not probed (disabled) sio3: not probed (disabled) sn0: not probed (disabled) vga0: at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 vt0: not probed (disabled) isa_probe_children: probing PnP devices Device configuration finished. Reducing kern.maxvnodes 134612 -> 100000 lapic: Divisor 2, Frequency 66504801 hz Timecounter "TSC" frequency 2261163082 Hz quality 800 Timecounters tick every 1.000 msec lo0: bpf attached acpi_acad0: acline initialization start acpi_acad0: On Line acpi_acad0: acline initialization done, tried 1 times battery0: battery initialization start battery1: battery initialization start battery0: battery initialization done, tried 1 times ata0-master: pio=PIO4 wdma=WDMA2 udma=UDMA100 cable=80 wire ad0: 76319MB at ata0-master UDMA100 ad0: 156301488 sectors [155061C/16H/63S] 16 sectors/interrupt 1 depth queue GEOM: new disk ad0 ata1-master: pio=PIO4 wdma=WDMA2 udma=UDMA33 cable=40 wire Trying to mount root from ufs:/dev/ad0s4a