Copyright (c) 1992-2006 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 7.0-CURRENT #: Sun Apr 30 21:08:18 CEST 2006 suleiman@warp9.segfaulted.com:/usr/obj/usr/home/suleiman/freebsd/src/sys/WARP9 Using 16 colors for the VM-PQ tuning (1024, 16) Preloaded elf kernel "/boot/kernel/kernel" at 0xffffffff80731000. Calibrating clock(s) ... i8254 clock: 1193133 Hz CLK_USE_I8254_CALIBRATION not specified - using default frequency Timecounter "i8254" frequency 1193182 Hz quality 0 Calibrating TSC clock ... TSC clock: 1993789606 Hz CPU: AMD Opteron(tm) Processor 2302 (1993.79-MHz K8-class CPU) Origin = "AuthenticAMD" Id = 0xf5a Stepping = 10 Features=0x78bfbff AMD Features=0xe0500800 L1 2MB data TLB: 8 entries, fully associative L1 2MB instruction TLB: 8 entries, fully associative L1 4KB data TLB: 32 entries, fully associative L1 4KB instruction TLB: 32 entries, fully associative L1 data cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative L1 instruction cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative L2 2MB unified TLB: 0 entries, disabled/not present L2 4KB data TLB: 512 entries, 4-way associative L2 4KB instruction TLB: 512 entries, 4-way associative L2 unified cache: 1024 kbytes, 64 bytes/line, 1 lines/tag, 16-way associative usable memory = 8514260992 (8119 MB) Physical memory chunk(s): 0x0000000000001000 - 0x0000000000097fff, 618496 bytes (151 pages) 0x0000000000832000 - 0x00000000fbf6ffff, 4218675200 bytes (1029950 pages) 0x0000000100000000 - 0x00000001f0f7ffff, 4042784768 bytes (987008 pages) avail memory = 8251129856 (7868 MB) INTR: Adding local APIC 0 as a target ACPI APIC Table: INTR: Adding local APIC 1 as a target FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs cpu0 (BSP): APIC ID: 0 cpu1 (AP): APIC ID: 1 APIC: CPU 0 has ACPI ID 0 APIC: CPU 1 has ACPI ID 1 MADT: Found IO APIC ID 2, Interrupt 0 at 0xfec00000 ioapic0: Routing external 8259A's -> intpin 0 ioapic0: intpin 0 -> ExtINT (edge, high) ioapic0: intpin 1 -> ISA IRQ 1 (edge, high) ioapic0: intpin 2 -> ISA IRQ 2 (edge, high) ioapic0: intpin 3 -> ISA IRQ 3 (edge, high) ioapic0: intpin 4 -> ISA IRQ 4 (edge, high) ioapic0: intpin 5 -> ISA IRQ 5 (edge, high) ioapic0: intpin 6 -> ISA IRQ 6 (edge, high) ioapic0: intpin 7 -> ISA IRQ 7 (edge, high) ioapic0: intpin 8 -> ISA IRQ 8 (edge, high) ioapic0: intpin 9 -> ISA IRQ 9 (edge, high) ioapic0: intpin 10 -> ISA IRQ 10 (edge, high) ioapic0: intpin 11 -> ISA IRQ 11 (edge, high) ioapic0: intpin 12 -> ISA IRQ 12 (edge, high) ioapic0: intpin 13 -> ISA IRQ 13 (edge, high) ioapic0: intpin 14 -> ISA IRQ 14 (edge, high) ioapic0: intpin 15 -> ISA IRQ 15 (edge, high) ioapic0: intpin 16 -> PCI IRQ 16 (level, low) ioapic0: intpin 17 -> PCI IRQ 17 (level, low) ioapic0: intpin 18 -> PCI IRQ 18 (level, low) ioapic0: intpin 19 -> PCI IRQ 19 (level, low) ioapic0: intpin 20 -> PCI IRQ 20 (level, low) ioapic0: intpin 21 -> PCI IRQ 21 (level, low) ioapic0: intpin 22 -> PCI IRQ 22 (level, low) ioapic0: intpin 23 -> PCI IRQ 23 (level, low) MADT: Interrupt override: source 0, irq 2 ioapic0: Routing IRQ 0 -> intpin 2 ioapic0: intpin 2 trigger: edge ioapic0: intpin 2 polarity: high lapic0: Routing NMI -> LINT1 lapic0: LINT1 trigger: edge lapic0: LINT1 polarity: high lapic1: Routing NMI -> LINT1 lapic1: LINT1 trigger: edge lapic1: LINT1 polarity: high MADT: Forcing active-low polarity and level trigger for SCI ioapic0: intpin 9 polarity: low ioapic0: intpin 9 trigger: level ioapic0 irqs 0-23 on motherboard cpu0 BSP: ID: 0x00000000 VER: 0x00040010 LDR: 0x00000000 DFR: 0xffffffff lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff timer: 0x000100ef therm: 0x00000000 err: 0x00010000 pcm: 0x00000400 random: nfslock: pseudo-device mem: null: io: acpi0: on motherboard ioapic0: routing intpin 9 (ISA IRQ 9) to vector 48 acpi0: [MPSAFE] pci_open(1): mode 1 addr port (0x0cf8) is 0x800030fc pci_open(1a): mode1res=0x80000000 (0x80000000) pci_cfgcheck: device 0 1 2 3 4 5 6 [class=060400] [hdr=01] is there (id=74601022) AcpiOsDerivePciId: bus 0 dev 7 func 3 acpi0: Power Button (fixed) acpi0: Sleep Button (fixed) acpi_bus_number: can't get _ADR AcpiOsDerivePciId: bus 8 dev 4 func 0 acpi_bus_number: can't get _ADR AcpiOsDerivePciId: bus 8 dev 3 func 0 pci_link0: Links after initial probe: Index IRQ Rtd Ref IRQs 0 11 N 0 3 5 10 11 pci_link0: Links after initial validation: Index IRQ Rtd Ref IRQs 0 11 N 0 3 5 10 11 pci_link0: Links after disable: Index IRQ Rtd Ref IRQs 0 255 N 0 3 5 10 11 pci_link1: Links after initial probe: Index IRQ Rtd Ref IRQs 0 255 N 0 3 5 10 11 pci_link1: Links after initial validation: Index IRQ Rtd Ref IRQs 0 255 N 0 3 5 10 11 pci_link1: Links after disable: Index IRQ Rtd Ref IRQs 0 255 N 0 3 5 10 11 pci_link2: Links after initial probe: Index IRQ Rtd Ref IRQs 0 255 N 0 3 5 10 11 pci_link2: Links after initial validation: Index IRQ Rtd Ref IRQs 0 255 N 0 3 5 10 11 pci_link2: Links after disable: Index IRQ Rtd Ref IRQs 0 255 N 0 3 5 10 11 pci_link3: Links after initial probe: Index IRQ Rtd Ref IRQs 0 11 N 0 3 5 10 11 pci_link3: Links after initial validation: Index IRQ Rtd Ref IRQs 0 11 N 0 3 5 10 11 pci_link3: Links after disable: Index IRQ Rtd Ref IRQs 0 255 N 0 3 5 10 11 unknown: I/O range not supported unknown: I/O range not supported AcpiOsDerivePciId: bus 0 dev 24 func 1 ACPI timer: 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/1 1/1 1/2 -> 10 Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x8008-0x800b on acpi0 cpu0: on acpi0 cpu1: on acpi0 acpi_button0: on acpi0 pcib0: port 0xcf8-0xcff on acpi0 pcib0: could not get PCI interrupt routing table for \\_SB_.PCI0 - AE_NOT_FOUND pci0: on pcib0 pci0: physical bus=0 found-> vendor=0x1022, dev=0x7460, revid=0x07 bus=0, slot=6, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0017, statreg=0x0230, cachelnsz=0 (dwords) lattimer=0x73 (3450 ns), mingnt=0x0e (3500 ns), maxlat=0x00 (0 ns) found-> vendor=0x1022, dev=0x7468, revid=0x05 bus=0, slot=7, func=0 class=06-01-00, hdrtype=0x00, mfdev=1 cmdreg=0x000f, statreg=0x0220, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x1022, dev=0x7469, revid=0x03 bus=0, slot=7, func=1 class=01-01-8a, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0200, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) map[20]: type 4, range 32, base 00001000, size 4, enabled found-> vendor=0x1022, dev=0x746b, revid=0x05 bus=0, slot=7, func=3 class=06-80-00, hdrtype=0x00, mfdev=0 cmdreg=0x0000, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x1022, dev=0x1100, revid=0x00 bus=0, slot=24, func=0 class=06-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0000, statreg=0x0010, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x1022, dev=0x1101, revid=0x00 bus=0, slot=24, func=1 class=06-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x1022, dev=0x1102, revid=0x00 bus=0, slot=24, func=2 class=06-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x1022, dev=0x1103, revid=0x00 bus=0, slot=24, func=3 class=06-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x1022, dev=0x1100, revid=0x00 bus=0, slot=25, func=0 class=06-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0000, statreg=0x0010, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x1022, dev=0x1101, revid=0x00 bus=0, slot=25, func=1 class=06-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x1022, dev=0x1102, revid=0x00 bus=0, slot=25, func=2 class=06-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x1022, dev=0x1103, revid=0x00 bus=0, slot=25, func=3 class=06-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) pcib1: at device 6.0 on pci0 pcib1: secondary bus 1 pcib1: subordinate bus 1 pcib1: I/O decode 0x2000-0x2fff pcib1: memory decode 0xfc000000-0xfdffffff pcib1: prefetched decode 0xfff00000-0xfffff pci1: on pcib1 pci1: physical bus=1 found-> vendor=0x1022, dev=0x7464, revid=0x0b bus=1, slot=0, func=0 class=0c-03-10, hdrtype=0x00, mfdev=1 cmdreg=0x0017, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x50 (20000 ns) intpin=d, irq=11 map[10]: type 1, range 32, base fc020000, size 12, enabled pcib1: (null) requested memory range 0xfc020000-0xfc020fff: good pcib1: matched entry for 1.0.INTD pcib1: slot 0 INTD hardwired to IRQ 19 found-> vendor=0x1022, dev=0x7464, revid=0x0b bus=1, slot=0, func=1 class=0c-03-10, hdrtype=0x00, mfdev=0 cmdreg=0x0017, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x50 (20000 ns) intpin=d, irq=11 map[10]: type 1, range 32, base fc021000, size 12, enabled pcib1: (null) requested memory range 0xfc021000-0xfc021fff: good pcib1: matched entry for 1.0.INTD pcib1: slot 0 INTD hardwired to IRQ 19 found-> vendor=0x8086, dev=0x1076, revid=0x00 bus=1, slot=3, func=0 class=02-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0017, statreg=0x0230, cachelnsz=16 (dwords) lattimer=0x40 (1920 ns), mingnt=0xff (63750 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 powerspec 2 supports D0 D3 current D0 map[10]: type 1, range 32, base fc000000, size 17, enabled pcib1: (null) requested memory range 0xfc000000-0xfc01ffff: good map[18]: type 4, range 32, base 00002400, size 6, enabled pcib1: (null) requested I/O range 0x2400-0x243f: in range pcib1: matched entry for 1.3.INTA pcib1: slot 3 INTA hardwired to IRQ 16 found-> vendor=0x1002, dev=0x4752, revid=0x27 bus=1, slot=6, func=0 class=03-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0087, statreg=0x0290, cachelnsz=16 (dwords) lattimer=0x42 (1980 ns), mingnt=0x08 (2000 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type 1, range 32, base fd000000, size 24, enabled pcib1: (null) requested memory range 0xfd000000-0xfdffffff: good map[14]: type 4, range 32, base 00002000, size 8, enabled pcib1: (null) requested I/O range 0x2000-0x20ff: in range map[18]: type 1, range 32, base fc022000, size 12, enabled pcib1: (null) requested memory range 0xfc022000-0xfc022fff: good pcib1: matched entry for 1.6.INTA pcib1: slot 6 INTA hardwired to IRQ 16 ohci0: mem 0xfc020000-0xfc020fff irq 19 at device 0.0 on pci1 ohci0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xfc020000 ioapic0: routing intpin 19 (PCI IRQ 19) to vector 49 ohci0: [GIANT-LOCKED] usb0: OHCI version 1.0, legacy support usb0: SMM does not respond, resetting usb0: on ohci0 usb0: USB revision 1.0 uhub0: on usb0 uhub0: 3 ports with 3 removable, self powered ohci1: mem 0xfc021000-0xfc021fff irq 19 at device 0.1 on pci1 ohci1: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xfc021000 ohci1: [GIANT-LOCKED] usb1: OHCI version 1.0, legacy support usb1: SMM does not respond, resetting usb1: on ohci1 usb1: USB revision 1.0 uhub1: on usb1 uhub1: 3 ports with 3 removable, self powered em0: port 0x2400-0x243f mem 0xfc000000-0xfc01ffff irq 16 at device 3.0 on pci1 em0: Reserved 0x20000 bytes for rid 0x10 type 3 at 0xfc000000 em0: Reserved 0x40 bytes for rid 0x18 type 4 at 0x2400 em0: bpf attached em0: Ethernet address: 00:0d:61:44:8c:c6 ioapic0: routing intpin 16 (PCI IRQ 16) to vector 50 em0: [FAST] vgapci0: port 0x2000-0x20ff mem 0xfd000000-0xfdffffff,0xfc022000-0xfc022fff irq 16 at device 6.0 on pci1 isab0: at device 7.0 on pci0 isa0: on isab0 atapci0: port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x1000-0x100f at device 7.1 on pci0 atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0x1000 ata0: on atapci0 atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0 atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6 ata0: reset tp1 mask=03 ostat0=50 ostat1=00 ata0: stat0=0x50 err=0x01 lsb=0x00 msb=0x00 ata0: stat1=0x00 err=0x01 lsb=0x00 msb=0x00 ata0: reset tp2 stat0=50 stat1=00 devices=0x1 ioapic0: routing intpin 14 (ISA IRQ 14) to vector 51 ata0: [MPSAFE] ata1: on atapci0 atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170 atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376 ata1: reset tp1 mask=03 ostat0=60 ostat1=70 ata1: stat0=0x20 err=0x20 lsb=0x20 msb=0x20 ata1: stat1=0x30 err=0x30 lsb=0x30 msb=0x30 ata1: reset tp2 stat0=20 stat1=30 devices=0x0 ioapic0: routing intpin 15 (ISA IRQ 15) to vector 52 ata1: [MPSAFE] pci0: at device 7.3 (no driver attached) pcib2: on acpi0 pcib2: could not get PCI interrupt routing table for \\_SB_.PCI1 - AE_NOT_FOUND pci8: on pcib2 pci8: physical bus=8 atkbdc0: port 0x60,0x64 irq 1 on acpi0 psm0: unable to allocate IRQ psmcpnp0: irq 12 on acpi0 psm0: current command byte:0047 psm0: failed to reset the aux device. sio0: configured irq 4 not in bitmap of probed irqs 0 sio0: port may not be enabled sio0: irq maps: 0 0 0 0 sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 sio0: type 16550A, console ioapic0: routing intpin 4 (ISA IRQ 4) to vector 53 sio0: [FAST] ppc0: using extended I/O port range ppc0: SPP ppc0: port 0x278-0x27f irq 5 on acpi0 ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode ppbus0: on ppc0 plip0: on ppbus0 plip0: bpf attached lpt0: on ppbus0 lpt0: Interrupt-driven port ppi0: on ppbus0 ioapic0: routing intpin 5 (ISA IRQ 5) to vector 54 ppc0: [GIANT-LOCKED] fdc0: port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0 fdc0: ic_type 90 part_id 80 ioapic0: routing intpin 6 (ISA IRQ 6) to vector 55 fdc0: [MPSAFE] fdc0: [FAST] pnp_identify: Trying Read_Port at 203 pnp_identify: Trying Read_Port at 243 pnp_identify: Trying Read_Port at 283 pnp_identify: Trying Read_Port at 2c3 pnp_identify: Trying Read_Port at 303 pnp_identify: Trying Read_Port at 343 pnp_identify: Trying Read_Port at 383 pnp_identify: Trying Read_Port at 3c3 PNP Identify complete atkbdc: atkbdc0 already exists; skipping it fdc: fdc0 already exists; skipping it ppc: ppc0 already exists; skipping it sc: sc0 already exists; skipping it sio: sio0 already exists; skipping it vga: vga0 already exists; skipping it isa_probe_children: disabling PnP devices isa_probe_children: probing non-PnP devices orm0: at iomem 0xc0000-0xc7fff,0xc8000-0xc8fff pnpid ORM0000 on isa0 sc0: at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x100> sc0: fb0, terminal emulator: sc (syscons terminal) vga0: at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 sio1: configured irq 3 not in bitmap of probed irqs 0 sio1: port may not be enabled sio1: irq maps: 0 0 0 0 sio1: probe failed test(s): 0 1 2 4 6 7 9 sio1 failed to probe at port 0x2f8-0x2ff irq 3 on isa0 sio2: not probed (disabled) sio3: not probed (disabled) isa_probe_children: probing PnP devices Device configuration finished. Reducing kern.maxvnodes 249660 -> 100000 linprocfs registered procfs registered lapic: Divisor 2, Frequency 99689491 hz Timecounter "TSC" frequency 1993789606 Hz quality -100 Timecounters tick every 1.000 msec Linux ELF exec handler installed lo0: bpf attached em0: Link is up 1000 Mbps Full Duplex ata0-master: pio=PIO4 wdma=WDMA2 udma=UDMA100 cable=80 wire ad0: setting PIO4 on 8111 chip ad0: setting UDMA100 on 8111 chip ad0: 76319MB at ata0-master UDMA100 ad0: 156301488 sectors [155061C/16H/63S] 16 sectors/interrupt 1 depth queue GEOM: new disk ad0 ad0: Adaptec check1 failed ad0: LSI (v3) check1 failed ad0: LSI (v2) check1 failed ad0: FreeBSD check1 failed ATA PseudoRAID loaded SMP: AP CPU #1 Launched! cpu1 AP: ID: 0x01000000 VER: 0x00040010 LDR: 0x00000000 DFR: 0xffffffff lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff timer: 0x000200ef therm: 0x00000000 err: 0x00010000 pcm: 0x00000400 INTR: Assigning IRQ 4 to local APIC 0 ioapic0: Assigning ISA IRQ 4 to local APIC 0 INTR: Assigning IRQ 5 to local APIC 1 ioapic0: Assigning ISA IRQ 5 to local APIC 1 INTR: Assigning IRQ 6 to local APIC 0 ioapic0: Assigning ISA IRQ 6 to local APIC 0 INTR: Assigning IRQ 9 to local APIC 1 ioapic0: Assigning ISA IRQ 9 to local APIC 1 INTR: Assigning IRQ 14 to local APIC 0 ioapic0: Assigning ISA IRQ 14 to local APIC 0 INTR: Assigning IRQ 15 to local APIC 1 ioapic0: Assigning ISA IRQ 15 to local APIC 1 INTR: Assigning IRQ 16 to local APIC 0 ioapic0: Assigning PCI IRQ 16 to local APIC 0 INTR: Assigning IRQ 19 to local APIC 1 ioapic0: Assigning PCI IRQ 19 to local APIC 1 hwpmc: TSC/1/0x20 K8/4/0x1ff Trying to mount root from ufs:/dev/ad0s1a start_init: trying /sbin/init