bge0@pci0:3:0:0: class=0x020000 card=0x169d103c chip=0x165714e4 rev=0x01 hdr=0x00 vendor = 'Broadcom Corporation' device = 'NetXtreme BCM5719 Gigabit Ethernet PCIe' class = network subclass = ethernet bar [10] = type Prefetchable Memory, range 64, base 0xf6bf0000, size 65536, enabled bar [18] = type Prefetchable Memory, range 64, base 0xf6be0000, size 65536, enabled bar [20] = type Prefetchable Memory, range 64, base 0xf6bd0000, size 65536, enabled bge1@pci0:3:0:1: class=0x020000 card=0x169d103c chip=0x165714e4 rev=0x01 hdr=0x00 vendor = 'Broadcom Corporation' device = 'NetXtreme BCM5719 Gigabit Ethernet PCIe' class = network subclass = ethernet bar [10] = type Prefetchable Memory, range 64, base 0xf6bc0000, size 65536, enabled bar [18] = type Prefetchable Memory, range 64, base 0xf6bb0000, size 65536, enabled bar [20] = type Prefetchable Memory, range 64, base 0xf6ba0000, size 65536, enabled bge2@pci0:3:0:2: class=0x020000 card=0x169d103c chip=0x165714e4 rev=0x01 hdr=0x00 vendor = 'Broadcom Corporation' device = 'NetXtreme BCM5719 Gigabit Ethernet PCIe' class = network subclass = ethernet bar [10] = type Prefetchable Memory, range 64, base 0xf6b90000, size 65536, enabled bar [18] = type Prefetchable Memory, range 64, base 0xf6b80000, size 65536, enabled bar [20] = type Prefetchable Memory, range 64, base 0xf6b70000, size 65536, enabled bge3@pci0:3:0:3: class=0x020000 card=0x169d103c chip=0x165714e4 rev=0x01 hdr=0x00 vendor = 'Broadcom Corporation' device = 'NetXtreme BCM5719 Gigabit Ethernet PCIe' class = network subclass = ethernet bar [10] = type Prefetchable Memory, range 64, base 0xf6b60000, size 65536, enabled bar [18] = type Prefetchable Memory, range 64, base 0xf6b50000, size 65536, enabled bar [20] = type Prefetchable Memory, range 64, base 0xf6b40000, size 65536, enabled --------------------------------------------------------------------------------------------------------------------------------- bge0: flags=8843 metric 0 mtu 1500 options=c019b ether 2c:76:8a:50:17:04 inet 10.73.149.59 netmask 0xffffff00 broadcast 10.73.149.255 inet6 fe80::2e76:8aff:fe50:1704%bge0 prefixlen 64 scopeid 0x1 nd6 options=29 media: Ethernet autoselect (1000baseT ) status: active bge1: flags=8802 metric 0 mtu 1500 options=c019b ether 2c:76:8a:50:17:05 nd6 options=29 media: Ethernet autoselect (none) status: no carrier bge2: flags=8802 metric 0 mtu 1500 options=c019b ether 2c:76:8a:50:17:06 nd6 options=29 media: Ethernet autoselect (none) status: no carrier bge3: flags=8802 metric 0 mtu 1500 options=c019b ether 2c:76:8a:50:17:07 nd6 options=29 media: Ethernet autoselect (none) status: no carrier --------------------------------------------------------------------------------------------------------------------------------- pcib1: at device 1.0 on pci0 pci4: on pcib1 pcib2: at device 1.1 on pci0 pci17: on pcib2 pcib3: at device 2.0 on pci0 pci3: on pcib3 pci0:3:0:0: failed to read VPD data. bge0: mem 0xf6bf0000-0xf6bfffff,0xf6be0000-0xf6beffff,0xf6bd0000-0xf6bdffff irq 32 at device 0.0 on pci3 bge0: APE FW version: NCSI v1.0.60.0 bge0: CHIP ID 0x05719001; ASIC REV 0x5719; CHIP REV 0x57190; PCI-E miibus0: on bge0 brgphy0: PHY 1 on miibus0 brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow bge0: Ethernet address: 2c:76:8a:50:17:04 pci0:3:0:1: failed to read VPD data. bge1: mem 0xf6bc0000-0xf6bcffff,0xf6bb0000-0xf6bbffff,0xf6ba0000-0xf6baffff irq 36 at device 0.1 on pci3 bge1: APE FW version: NCSI v1.0.60.0 bge1: CHIP ID 0x05719001; ASIC REV 0x5719; CHIP REV 0x57190; PCI-E miibus1: on bge1 brgphy1: PHY 2 on miibus1 brgphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow bge1: Ethernet address: 2c:76:8a:50:17:05 pci0:3:0:2: failed to read VPD data. bge2: mem 0xf6b90000-0xf6b9ffff,0xf6b80000-0xf6b8ffff,0xf6b70000-0xf6b7ffff irq 32 at device 0.2 on pci3 bge2: APE FW version: NCSI v1.0.60.0 bge2: CHIP ID 0x05719001; ASIC REV 0x5719; CHIP REV 0x57190; PCI-E miibus2: on bge2 brgphy2: PHY 3 on miibus2 brgphy2: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow bge2: Ethernet address: 2c:76:8a:50:17:06 pci0:3:0:3: failed to read VPD data. bge3: mem 0xf6b60000-0xf6b6ffff,0xf6b50000-0xf6b5ffff,0xf6b40000-0xf6b4ffff irq 36 at device 0.3 on pci3 bge3: APE FW version: NCSI v1.0.60.0 bge3: CHIP ID 0x05719001; ASIC REV 0x5719; CHIP REV 0x57190; PCI-E miibus3: on bge3 brgphy3: PHY 4 on miibus3 brgphy3: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow bge3: Ethernet address: 2c:76:8a:50:17:07 --------------------------------------------------------------------------------------------------------------------------------- /dev/da0p4: FREE BLK COUNT(S) WRONG IN SUPERBLK (SALVAGED) /dev/da0p4: SUMMARY INFORMATION BAD (SALVAGED) /dev/da0p4: BLK(S) MISSING IN BIT MAPS (SALVAGED)