#
# GENERIC -- Generic machine with WD/AHx/NCR/BTx family disks
#
# For more information read the handbook part System Administration -> 
# Configuring the FreeBSD Kernel -> The Configuration File. 
# The handbook is available in /usr/share/doc/handbook or online as
# latest version from the FreeBSD World Wide Web server 
# <URL:http://www.FreeBSD.ORG/>
#
# An exhaustive list of options and more detailed explanations of the 
# device lines is present in the ./LINT configuration file. If you are 
# in doubt as to the purpose or necessity of a line, check first in LINT.
#
#	$Id: GENERIC,v 1.101 1997/10/31 22:10:02 jseger Exp $

machine		"i386"
cpu		"I386_CPU"
cpu		"I486_CPU"
cpu		"I586_CPU"
ident		PICOBSD
maxusers	20

#options		MATH_EMULATE		#Support for x87 emulation
options		INET			#InterNETworking
options		FFS			#Berkeley Fast Filesystem
options		NFS			#Network Filesystem
options		MFS
options		MSDOSFS			#MSDOS Filesystem
options		"CD9660"		#ISO 9660 Filesystem
options		PROCFS			#Process filesystem
options		"COMPAT_43"		#Compatible with BSD 4.3 [KEEP THIS!]
options		USERCONFIG		#boot -c editor
options		USERCONFIG_BOOT		#imply -c and parse info area
options		VISUAL_USERCONFIG	#visual boot -c editor
options		IPFIREWALL
options		IPFIREWALL_DEFAULT_TO_ACCEPT
options		IPDIVERT

config		kernel	root on wd0a swap on wd0a

controller	isa0
controller	pci0

controller	fdc0	at isa? port "IO_FD1" bio irq 6 drq 2 vector fdintr
disk		fd0	at fdc0 drive 0
#disk		fd1	at fdc0 drive 1

options		"CMD640"	# work around CMD640 chip deficiency
controller	wdc0	at isa? port "IO_WD1" bio irq 14 vector wdintr
disk		wd0	at wdc0 drive 0
disk		wd1	at wdc0 drive 1

controller	wdc1	at isa? port "IO_WD2" bio irq 15 vector wdintr
disk		wd2	at wdc1 drive 0
disk		wd3	at wdc1 drive 1

options		ATAPI		#Enable ATAPI support for IDE bus
options		ATAPI_STATIC	#Don't do it as an LKM
device		wcd0	#IDE CD-ROM

# syscons is the default console driver, resembling an SCO console
device		sc0	at isa? port "IO_KBD" tty irq 1 vector scintr

device		npx0	at isa? port "IO_NPX" irq 13 vector npxintr

device		sio0	at isa? port "IO_COM1" flags 0x10 tty irq 4 vector siointr
device		sio1	at isa? port "IO_COM2" tty irq 3 vector siointr
device		sio2	at isa? port "IO_COM3" tty irq 5 vector siointr
device		sio3	at isa? port "IO_COM4" tty irq 9 vector siointr

# Support for multiport serial cards

options	"COM_MULTIPORT"

# AST

device		sio4	at isa? port 0x2a0 tty flags 0x701
device		sio5	at isa? port 0x2a8 tty flags 0x701
device		sio6	at isa? port 0x2b0 tty flags 0x701
device		sio7	at isa? port 0x2b8 tty flags 0x701 irq 12 vector siointr

# Boca Board. You must configure the ports above with -c to change the flags.

device		sio8	at isa? port 0x120 tty flags 0xb05
device		sio9	at isa? port 0x128 tty flags 0xb05
device		sio10	at isa? port 0x130 tty flags 0xb05
device		sio11	at isa? port 0x138 tty flags 0xb05 irq 12 vector siointr

# Hayes ESP boards

options	"COM_ESP"

# Comtrol Rocketport
# The PCI versions
#device	rp0
#device	rp1
# The ISA versions
#device	rp0	at isa? port 0x100 tty
#device	rp1	at isa? port 0x180 tty

# Cyclades Cyclom-Y serial driver
device cy0	at isa? tty irq 10 iomem 0xd4000 iosiz 0x2000 vector cyintr
device cy1	at isa? tty irq 11 iomem 0xd6000 iosiz 0x2000 vector cyintr

device		lpt0	at isa? port? tty irq 7 vector lptintr

# Order is important here due to intrusive probes, do *not* alphabetize
# this list of network interfaces until the probes have been fixed.
# Right now it appears that the ie0 must be probed before ep0. See
# revision 1.20 of this file.
device de0
device de1
device fxp0

device ed0 at isa? port 0x280 net irq 10 iomem 0xd8000 vector edintr
device ed1 at isa? port 0x300 net irq 5 iomem 0xd0000 vector edintr
#device ie0 at isa? port 0x300 net irq 10 iomem 0xd0000 vector ieintr
device ep0 at isa? port 0x300 net irq 10 vector epintr
device ep1 at isa? port 0x280 net irq 5 vector epintr
#device ex0 at isa? port? net irq? vector exintr
#device fe0 at isa? port 0x300 net irq ? vector feintr
#device le0 at isa? port 0x300 net irq 5 iomem 0xd0000 vector le_intr
#device lnc0 at isa? port 0x280 net irq 10 drq 0 vector lncintr
#device ze0 at isa? port 0x300 net irq 10 iomem 0xd8000 vector zeintr
#device zp0 at isa? port 0x300 net irq 10 iomem 0xd8000 vector zpintr

pseudo-device	loop
pseudo-device	ether
#pseudo-device	sl	1
# iijppp uses tun instead of ppp device
pseudo-device	ppp	8
#pseudo-device	tun	2
#pseudo-device	vn
#pseudo-device	speaker
#device pca0 at isa? port IO_TIMER1 tty
pseudo-device	pty	16
pseudo-device	gzip		# Exec gzipped a.out's
