Loading.: Acpi(PNP0A03,0)/Pci(1E|0)/Pci(0|0)/Mac(000347CDCF46)      
Running LoadFile()

CLIENT MAC ADDR: 00 03 47 CD CF 46 
CLIENT IP: 10.2.2.2  MASK: 255.255.0.0  DHCP IP: 10.2.0.1
GATEWAY IP: 10.2.0.1 

TSize.Running LoadFile()

Starting: Acpi(PNP0A03,0)/Pci(1E|0)/Pci(0|0)/Mac(000347CDCF46)
Console: EFI console

FreeBSD/ia64 EFI boot, Revision 0.3
(root@ia64.corp.yahoo.com, Thu Jul 18 02:54:36 PDT 2002)
net_open: server addr: 10.2.0.1
net_open: server path: /home/FreeBSD/clone/tftproot/ia64
Loading /boot/defaults/loader.conf 
/boot/kernel/kernel data=0x5a23e8+0x56900 syms=[0x8+0x48fd8+0x8+0x3b5a5]
|
Hit [Enter] to boot immediately, or any other key for command prompt.
Booting [/boot/kernel/kernel] in 9 seconds... 

Type '?' for a list of commands, 'help' for more detailed help.
OK boot
Entering /boot/kernel/kernel at 0xe00000000050a000...
ACPI 2.0 table at 0x7ff83000
ACPI 1.x table at 0x7ff84000
Using ACPI2.0 table
ACPI debug layer 0x0  debug level 0x0
Copyright (c) 1992-2002 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD 5.0-CURRENT #73: Sun Jul 21 05:09:34 PDT 2002
    root@ia64.corp.yahoo.com:/home/src/sys/ia64/compile/I2
Preloaded elf kernel "/boot/kernel/kernel" at 0xe000000001b80000.
Preloaded mfs_root "/boot/kernel/mfsroot" at 0xe000000001b800d0.
CPU: Itanium 2 (896.28-Mhz)
  Origin = "GenuineIntel"  Model = 0  Revision = 5
  Features = 0x1<LB>
real memory  = 4249927680 (4150320K bytes)
avail memory = 4057251840 (3962160K bytes)
FPSWA Revision = 0x10009, Entry = 0xe0000001ffe66050
ACPI 2.0 table at 0x7ff83000
ACPI 1.x table at 0x7ff84000
Using ACPI2.0 table
SAPIC 0 is 0xa0000000001b0e00, IRQ 0-23
SAPIC 1 is 0xa0000000001b0de0, IRQ 24-47
SAPIC 2 is 0xa0000000001b0dc0, IRQ 48-71
SAPIC 3 is 0xa0000000001b0da0, IRQ 72-95
SAPIC 4 is 0xa0000000001b0d80, IRQ 96-119
SAPIC 5 is 0xa0000000001b0d60, IRQ 120-143
SAPIC 6 is 0xa0000000001b0d40, IRQ 144-167
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
cpu0: SAPIC Id=c6, SAPIC Eid=18 (BSP)
cpu1: SAPIC Id=c4, SAPIC Eid=18
cpu2: SAPIC Id=c0, SAPIC Eid=18
cpu3: SAPIC Id=c2, SAPIC Eid=18
md0: Preloaded image </boot/kernel/mfsroot> 16777216 bytes at 0xe000000000b7d278
Initializing GEOMetry subsystem
ACPI 2.0 table at 0x7ff83000
ACPI 1.x table at 0x7ff84000
Using ACPI2.0 table
acpi0: <INTEL  SR870BN4> on motherboard
acpi0: power button is handled as a fixed feature programming model.
Timecounter "ACPI-fast"  frequency 3579545 Hz
acpi_cpu0: <CPU> on acpi0
acpi_cpu1: <CPU> on acpi0
acpi_cpu2: <CPU> on acpi0
acpi_cpu3: <CPU> on acpi0
acpi_pcib0: <Host-PCI bridge> on acpi0
acpi_pcib0: acpi_pcib_route_interrupt: \_SB_.PCI0 pci0:29:0
acpi_pcib0: IRQ ROUTING KLUDGE \_SB_.PCI0 bus 0 slot 29 pin 0 -> 50
acpi_pcib0: acpi_pcib_route_interrupt: \_SB_.PCI0 pci0:29:1
acpi_pcib0: IRQ ROUTING KLUDGE \_SB_.PCI0 bus 0 slot 29 pin 1 -> 49
acpi_pcib0: acpi_pcib_route_interrupt: \_SB_.PCI0 pci0:31:0
pci0: <PCI bus> on acpi_pcib0
uhci0: <Intel 82801DB (ICH4) USB controller USB-A> port 0x5fc0-0x5fdf irq 50 at device 29.0 on pci0
usb0: <Intel 82801DB (ICH4) USB controller USB-A> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <Intel 82801DB (ICH4) USB controller USB-B> port 0x5fe0-0x5fff irq 49 at device 29.1 on pci0
usb1: <Intel 82801DB (ICH4) USB controller USB-B> on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhub2: Microsoft product 0x001c, class 9/0, rev 1.10/5.00, addr 2
uhub2: 3 ports with 2 removable, bus powered
ukbd0: Microsoft Microsoft Natural Keyboard Pro, rev 1.10/1.14, addr 3, iclass 3/1
pcib0: <PCI-PCI bridge> at device 30.0 on pci0
pcib_route_interrupt: pci1:0:0 - Hardwiring to IRQ 18
pci1: <PCI bus> on pcib0
em0: <Intel(R) PRO/1000 Network Connection, Version - 1.3.14> port 0x6fc0-0x6fff mem 0xfbfe0000-0xfbffffff irq 18 at device 0.0 on pci1
em0:  Speed:100 Mbps  Duplex:Full
pci1: <display, VGA> at device 1.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
pci0: <mass storage, ATA> at device 31.1 (no driver attached)
can't fetch resources for \_SB_.PCI0.SBRG.UAR1 - AE_BAD_DATA
can't fetch resources for \_SB_.PCI0.SBRG.UAR2 - AE_BAD_DATA
can't fetch resources for \_SB_.PCI0.SBRG.LPT_ - AE_BAD_DATA
acpi_pcib1: <Host-PCI bridge> on acpi0
acpi_pcib1: could not get PCI interrupt routing table for \_SB_.PCI1 - AE_NOT_FOUND
pci2: <PCI bus> on acpi_pcib1
pci2: <base peripheral, interrupt controller> at device 28.0 (no driver attached)
pcib1: <PCI-PCI bridge> at device 29.0 on pci2
pcib_route_interrupt: pci3:2:0 - Hardwiring to IRQ 52
acpi_pcib1: acpi_pcib_route_interrupt: \_SB_.PCI1 pci2:29:1
pci3: <PCI bus> on pcib1
fxp0: <Intel Pro 10/100B/100+ Ethernet> port 0x7fc0-0x7fff mem 0xf9900000-0xf99fffff,0xf9af0000-0xf9af0fff irq 52 at device 2.0 on pci3
fxp0: Ethernet address 00:d0:b7:8e:09:75
inphy0: <i82555 10/100 media interface> on miibus0
inphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
pci3: <base peripheral> at device 31.0 (no driver attached)
pci2: <base peripheral, interrupt controller> at device 30.0 (no driver attached)
pcib2: <PCI-PCI bridge> at device 31.0 on pci2
pcib_route_interrupt: pci5:1:0 - Hardwiring to IRQ 24
acpi_pcib1: acpi_pcib_route_interrupt: \_SB_.PCI1 pci2:31:3
acpi_pcib1: acpi_pcib_route_interrupt: \_SB_.PCI1 pci2:31:0
acpi_pcib1: acpi_pcib_route_interrupt: \_SB_.PCI1 pci2:31:3
pci4: <PCI bus> on pcib2
fxp1: <Intel Pro 10/100B/100+ Ethernet> port 0x9fc0-0x9fff mem 0xf9e00000-0xf9efffff,0xf9ff0000-0xf9ff0fff irq 24 at device 1.0 on pci4
fxp1: Ethernet address 00:90:27:75:d6:17
inphy1: <i82555 10/100 media interface> on miibus1
inphy1:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
pci4: <mass storage, SCSI> at device 2.0 (no driver attached)
pci4: <mass storage, SCSI> at device 2.1 (no driver attached)
pci4: <base peripheral> at device 31.0 (no driver attached)
acpi_pcib2: <Host-PCI bridge> on acpi0
acpi_pcib2: could not get PCI interrupt routing table for \_SB_.PCI3 - AE_NOT_FOUND
pci7: <PCI bus> on acpi_pcib2
pci7: <base peripheral, interrupt controller> at device 28.0 (no driver attached)
pcib3: <PCI-PCI bridge> at device 29.0 on pci7
acpi_pcib2: acpi_pcib_route_interrupt: \_SB_.PCI3 pci7:29:1
pci5: <PCI bus> on pcib3
pci5: <base peripheral> at device 31.0 (no driver attached)
pci7: <base peripheral, interrupt controller> at device 30.0 (no driver attached)
pcib4: <PCI-PCI bridge> at device 31.0 on pci7
pcib_route_interrupt: pci10:2:0 - Hardwiring to IRQ 76
acpi_pcib2: acpi_pcib_route_interrupt: \_SB_.PCI3 pci7:31:3
pci6: <PCI bus> on pcib4
isp0: <Qlogic ISP 1280 PCI SCSI Adapter> port 0xbe00-0xbeff mem 0xedff0000-0xedff0fff irq 76 at device 2.0 on pci6
pci6: <base peripheral> at device 31.0 (no driver attached)
acpi_pcib3: <Host-PCI bridge> on acpi0
acpi_pcib3: could not get PCI interrupt routing table for \_SB_.PCI4 - AE_NOT_FOUND
pci12: <PCI bus> on acpi_pcib3
pci12: <base peripheral, interrupt controller> at device 28.0 (no driver attached)
pcib5: <PCI-PCI bridge> at device 29.0 on pci12
pcib_route_interrupt: pci13:1:0 - Hardwiring to IRQ 16
acpi_pcib3: acpi_pcib_route_interrupt: \_SB_.PCI4 pci12:29:1
pci8: <PCI bus> on pcib5
fxp2: <Intel Pro 10/100B/100+ Ethernet> port 0xdfc0-0xdfff mem 0xdbe00000-0xdbefffff,0xdbff0000-0xdbff0fff irq 16 at device 1.0 on pci8
fxp2: Ethernet address 00:02:b3:03:cb:3f
inphy2: <i82555 10/100 media interface> on miibus2
inphy2:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
pci8: <base peripheral> at device 31.0 (no driver attached)
pci12: <base peripheral, interrupt controller> at device 30.0 (no driver attached)
pcib6: <PCI-PCI bridge> at device 31.0 on pci12
acpi_pcib3: acpi_pcib_route_interrupt: \_SB_.PCI4 pci12:31:3
pci9: <PCI bus> on pcib6
pci9: <base peripheral> at device 31.0 (no driver attached)
acpi_timer0: <24-bit timer at 3.579545MHz> port 0xc08-0xc0b on acpi0
orm0: <Option ROMs> at iomem 0xe4000-0xe7fff,0xcc800-0xcd7ff,0xca000-0xcc7ff,0xc9000-0xc9fff,0xc8000-0xc8fff,0xc0000-0xc7fff on isa0
sc0: <System console> on isa0
sc0: VGA <16 virtual consoles, flags=0x200>
sio0 at port 0x2f8-0x2ff flags 0x10 on isa0
sio0: type 16550A, console
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounters tick every 10.000 msec
Waiting 2 seconds for SCSI devices to settle
acpi_cpu: CPU throttling enabled, 8 steps from 100% to 12.5%
Mounting root from ufs:md0
da0 at isp0 bus 0 target 0 lun 0
da0: <IBM DDYS-T18350N S96H> Fixed Direct Access SCSI-3 device 
da0: 80.000MB/s transfers (40.000MHz, offset 8, 16bit), Tagged Queueing Enabled
da0: 17501MB (35843670 512 byte sectors: 255H 63S/T 2231C)
Enter full pathname of shell or RETURN for /bin/sh: 
# df
Filesystem 512-blocks  Used Avail Capacity  Mounted on
/dev/md0        31836 28920   372    99%    /
devfs               2     2     0   100%    /dev
# ls -l
total 17
drwxr-xr-x  2 root  0  512 Jul 21 11:49 bin
dr-xr-xr-x  4 root  0  512 Jul 21 05:29 dev
drwxr-xr-x  2 root  0  512 Jul 18 12:24 etc
drwxr-xr-x  2 root  0  512 Jul 21 05:30 mnt
drwxr-xr-x  2 root  0  512 Jul 21 11:50 sbin
# ps -ax
  PID  TT  STAT      TIME COMMAND
    0  ??  DLs    0:00.00  (swapper)
    1  ??  ILs    0:00.02 /sbin/init --
    2  ??  DL     0:00.02  (md0)
    3  ??  DL     0:00.06  (g_event)
    4  ??  DL     0:00.08  (g_up)
    5  ??  DL     0:00.08  (g_down)
    6  ??  DL     0:00.00  (pagedaemon)
    7  ??  DL     0:00.00  (vmdaemon)
    8  ??  DL     0:04.52  (pagezero)
    9  ??  DL     0:00.01  (bufdaemon)
   10  ??  DL     0:00.00  (ktrace)
   11  ??  RL     2:39.63  (idle: cpu3)
   12  ??  RL     2:39.78  (idle: cpu2)
   13  ??  RL     2:38.16  (idle: cpu1)
   14  ??  RL     2:37.75  (idle: cpu0)
   16  ??  WL     0:06.00  (swi6: tty:sio clock)
   18  ??  DL     0:00.04  (random)
   20  ??  WL     0:00.03  (swi3: cambio)
   21  ??  WL     0:00.00  (swi5: acpitaskq)
   25  ??  DL     0:00.00  (usb0)
   26  ??  DL     0:00.00  (usbtask)
   28  ??  DL     0:00.00  (usb1)
   29  ??  WL     0:00.00  (intr: em0)
   30  ??  WL     0:00.01  (intr: fxp0)
   31  ??  WL     0:00.00  (intr: fxp1)
   32  ??  WL     0:00.00  (intr: isp0)
   33  ??  WL     0:00.00  (intr: fxp2)
   34  ??  WL     0:00.01  (swi0: tty:sio)
   35  ??  DL     0:00.01  (syncer)
   36  ??  DL     0:00.00  (vnlru)
   37  ??  IL     0:00.00  (nfsiod 0)
   38  ??  IL     0:00.00  (nfsiod 1)
   39  ??  IL     0:00.00  (nfsiod 2)
   40  ??  IL     0:00.00  (nfsiod 3)
   42  d0  Ss     0:00.03 -sh (sh)
   54  d0  R+     0:00.00 ps -ax
# /sbin/ifconfig em0 10.2.2.2 netmask 255.255.0.0 
# /sbin/ifconfig em0
em0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
        options=3<rxcsum,txcsum>
        inet 10.2.2.2 netmask 0xffff0000 broadcast 10.2.255.255
        ether 00:03:47:cd:cf:46
        media: Ethernet autoselect (100baseTX <full-duplex>)
        status: active
# /sbin/ping 10.2.0.1
PING 10.2.0.1 (10.2.0.1): 48 data bytes
64 bytes from 10.2.0.1: icmp_seq=0 ttl=64 time=0.499 ms
64 bytes from 10.2.0.1: icmp_seq=1 ttl=64 time=0.210 ms
^C
--- 10.2.0.1 ping statistics ---
2 packets transmitted, 2 packets received, 0% packet loss
round-trip min/avg/max/stddev = 0.210/0.354/0.499/0.145 ms