Starting: Acpi(PNP0A03,0)/Pci(1E|0)/Pci(0|0)/Mac(000347CDCF46) Console: EFI console FreeBSD/ia64 EFI boot, Revision 0.3 (root@ia64.corp.yahoo.com, Thu Jul 18 02:54:36 PDT 2002) net_open: server addr: 10.2.0.1 net_open: server path: /home/FreeBSD/clone/tftproot/ia64 Loading /boot/defaults/loader.conf /boot/kernel/kernel data=0x5a2248+0x569a0 syms=[0x8+0x48db0+0x8+0x3b612] Hit [Enter] to boot immediately, or any other key for command prompt. Booting [/boot/kernel/kernel] in 9 seconds... Type '?' for a list of commands, 'help' for more detailed help. OK set hint.mpt.0.debug=3 OK set hint.mpt.1.debug=3 OK set vfs.root.mountfrom=ufs:/dev/da1s2a OK show LINES=24 boot_multicons=YES boot_serial=YES bootfile=kernel console=efi currdev=net0: hint.mpt.0.debug=3 hint.mpt.1.debug=3 hint.sc.0.at=isa hint.sio.0.at=isa hint.sio.0.flags=0 hint.sio.0.irq=4 hint.sio.0.port=0x3F8 hint.sio.1.at=isa hint.sio.1.flags=0x10 hint.sio.1.irq=3 hint.sio.1.port=0x2F8 hint.vga.0.at=isa interpret=OK kernel=kernel kernel_options= kernelname=/boot/kernel/kernel loaddev=net0: module_path=/boot/kernel;/boot/kernel;/boot/modules;/modules prompt=${interpret} vfs.root.mountfrom=ufs:/dev/da1s2a OK boot -sv Entering /boot/kernel/kernel at 0xe00000000050a000... PAL Proc at 0xe00000007fdc8010 SAL Proc at 0xe00000007fe08020, GP at 0xe00000008004a6c0 SAL: AP wake-up vector: 0xf0 Platform clock frequency 199173111 Hz Processor ratio 9/2, Bus ratio 1/1, ITC ratio 9/2 Skipping memory chunk start 0x180000000 Skipping memory chunk start 0x1fefff000 Skipping memory chunk start 0x1ff801000 Skipping memory chunk start 0x1ff9ff000 Skipping memory chunk start 0x1ffdff000 Skipping memory chunk start 0x1ffe7f000 ptc.e base=0x0, count1=1, count2=1, stride1=0x0, stride2=0x0 Processor supports 24 Region ID bits Trying VHPT size 0x800000 Putting VHPT at 0x1000000 Splitting [0xb82000-0xff80000] ACPI 2.0 table at 0x7ff83000 ACPI 1.x table at 0x7ff84000 Using ACPI2.0 table ACPI debug layer 0x0 debug level 0x0 Copyright (c) 1992-2002 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 5.0-CURRENT #4: Tue Aug 20 00:59:39 PDT 2002 root@mckinley.corp.yahoo.com:/home/src/sys/ia64/compile/I3 Preloaded elf kernel "/boot/kernel/kernel" at 0xe000000000b80000. CPU: Itanium 2 (896.28-Mhz) Origin = "GenuineIntel" Model = 0 Revision = 5 Features = 0x1 real memory = 2106761216 (2057384K bytes) Physical memory chunk(s): 0x00352000 - 0x004fffff, 1761280 bytes (215 pages) 0x00b82000 - 0x00ffffff, 4710400 bytes (575 pages) 0x01800000 - 0x0ff7ffff, 242745344 bytes (29632 pages) 0x10000000 - 0x7da2ffff, 1839398912 bytes (224536 pages) avail memory = 2051137536 (2003064K bytes) FPSWA Revision = 0x10009, Entry = 0xe0000001ffe66050 ACPI 2.0 table at 0x7ff83000 ACPI 1.x table at 0x7ff84000 Using ACPI2.0 table Table 'FACP' at 0xe00000007ff83138 Table 'APIC' at 0xe00000007ff83230 Local SAPIC entry ProcessorId=0x0, Id=0xc6, Eid=0x18 Local SAPIC entry ProcessorId=0x1, Id=0xc2, Eid=0x18 Local SAPIC entry ProcessorId=0x2, Id=0xc4, Eid=0x18 Local SAPIC entry ProcessorId=0x3, Id=0xc0, Eid=0x18 I/O SAPIC entry Id=0x0, Vector=0x0, Address=0xfec00000 SAPIC 0 is 0xa0000000001b0d40, 0-23 I/O SAPIC entry Id=0x1, Vector=0x18, Address=0xfec10000 SAPIC 1 is 0xa0000000001b0d20, 24-47 I/O SAPIC entry Id=0x2, Vector=0x30, Address=0xfec20000 SAPIC 2 is 0xa0000000001b0d00, 48-71 I/O SAPIC entry Id=0x3, Vector=0x48, Address=0xfec30000 SAPIC 3 is 0xa0000000001b0ce0, 72-95 I/O SAPIC entry Id=0x4, Vector=0x60, Address=0xfec40000 SAPIC 4 is 0xa0000000001b0cc0, 96-119 I/O SAPIC entry Id=0x5, Vector=0x78, Address=0xfec50000 SAPIC 5 is 0xa0000000001b0ca0, 120-143 I/O SAPIC entry Id=0x6, Vector=0x90, Address=0xfec60000 SAPIC 6 is 0xa0000000001b0c80, 144-167 Interrupt source override entry Bus=0, Source=9, Irq=0x9 Platform interrupt entry Polarity=3, TriggerMode=3, Id=0xc6, Eid=0x18, Vector=0x1e, Irq=22 MCA: allocated 16384 bytes for state information SMP: waking up cpu3 SMP: waking up cpu2 SMP: waking up cpu1 FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs cpu0: SAPIC Id=c6, SAPIC Eid=18 (BSP) cpu1: SAPIC Id=c2, SAPIC Eid=18 cpu2: SAPIC Id=c4, SAPIC Eid=18 cpu3: SAPIC Id=c0, SAPIC Eid=18 random: mem: null: ACPI 2.0 table at 0x7ff83000 ACPI 1.x table at 0x7ff84000 Using ACPI2.0 table acpi0: on motherboard acpi0: power button is handled as a fixed feature programming model. ACPI timer looks GOOD min = 2, max = 3, width = 2 ACPI timer looks GOOD min = 2, max = 3, width = 2 ACPI timer looks GOOD min = 2, max = 3, width = 2 ACPI timer looks GOOD min = 2, max = 3, width = 2 ACPI timer looks GOOD min = 2, max = 3, width = 2 ACPI timer looks GOOD min = 2, max = 3, width = 2 ACPI timer looks GOOD min = 2, max = 3, width = 2 ACPI timer looks GOOD min = 2, max = 3, width = 2 ACPI timer looks GOOD min = 2, max = 3, width = 2 ACPI timer looks GOOD min = 2, max = 3, width = 2 Timecounter "ACPI-fast" frequency 3579545 Hz acpi_cpu0: on acpi0 acpi_cpu1: on acpi0 acpi_cpu2: on acpi0 acpi_cpu3: on acpi0 pcib0: on acpi0 pci0: on pcib0 pci0: physical bus=0 map[20]: type 4, range 32, base 00004fc0, size 5, enabled pcib0: matched entry for 0.29.INTA (source ) pcib0: device is hardwired to IRQ 16 found-> vendor=0x8086, dev=0x24c2, revid=0x01 bus=0, slot=29, func=0 class=0c-03-00, hdrtype=0x00, mfdev=1 intpin=a, irq=16 map[20]: type 4, range 32, base 00004fe0, size 5, enabled pcib0: matched entry for 0.29.INTB (source ) pcib0: device is hardwired to IRQ 19 found-> vendor=0x8086, dev=0x24c4, revid=0x01 bus=0, slot=29, func=1 class=0c-03-00, hdrtype=0x00, mfdev=0 intpin=b, irq=19 found-> vendor=0x8086, dev=0x244e, revid=0x81 bus=0, slot=30, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 found-> vendor=0x8086, dev=0x24c0, revid=0x01 bus=0, slot=31, func=0 class=06-01-00, hdrtype=0x00, mfdev=1 map[10]: type 4, range 32, base 00000000, size 3, enabled map[14]: type 4, range 32, base 00000000, size 2, enabled map[18]: type 4, range 32, base 00000000, size 3, enabled map[1c]: type 4, range 32, base 00000000, size 2, enabled map[20]: type 4, range 32, base 00001000, size 4, enabled found-> vendor=0x8086, dev=0x24cb, revid=0x01 bus=0, slot=31, func=1 class=01-01-8a, hdrtype=0x00, mfdev=0 intpin=a, irq=255 pci0: at device 29.0 (no driver attached) pci0: at device 29.1 (no driver attached) pcib1: at device 30.0 on pci0 pcib1: secondary bus 1 pcib1: subordinate bus 1 pcib1: I/O decode 0x5000-0x5fff pcib1: memory decode 0xfa000000-0xfbffffff pcib1: prefetched decode 0xfff00000-0xfffff pci1: on pcib1 pci1: physical bus=1 map[10]: type 1, range 32, base fbfe0000, size 17, enabled map[18]: type 4, range 32, base 00005fc0, size 6, enabled pcib1: matched entry for 1.0.INTA (source ) pcib1: device is hardwired to IRQ 18 found-> vendor=0x8086, dev=0x100e, revid=0x02 bus=1, slot=0, func=0 class=02-00-00, hdrtype=0x00, mfdev=0 intpin=a, irq=18 powerspec 2 supports D0 D3 current D0 map[10]: type 1, range 32, base fa000000, size 24, enabled map[14]: type 4, range 32, base 00005e00, size 8, enabled map[18]: type 1, range 32, base fbfd0000, size 12, enabled found-> vendor=0x1002, dev=0x4752, revid=0x27 bus=1, slot=1, func=0 class=03-00-00, hdrtype=0x00, mfdev=0 powerspec 2 supports D0 D1 D2 D3 current D0 em0: port 0x5fc0-0x5fff mem 0xfbfe0000-0xfbffffff irq 18 at device 0.0 on pci1 pcib1: device em0 requested decoded memory range 0xfbfe0000-0xfbffffff pcib1: device em0 requested decoded I/O range 0x5fc0-0x5fff em0: Speed:100 Mbps Duplex:Full pci1: at device 1.0 (no driver attached) isab0: at device 31.0 on pci0 isa0: on isab0 pci0: at device 31.1 (no driver attached) sio0: configured irq 4 not in bitmap of probed irqs 0 sio0: port may not be enabled sio0: irq maps: 0 0 0 0 sio0 port 0x3f8-0x3ff irq 4 on acpi0 sio0: type 16550A sio1: configured irq 3 not in bitmap of probed irqs 0 sio1: port may not be enabled sio1: irq maps: 0 0 0 0 sio1 port 0x2f8-0x2ff irq 3 on acpi0 sio1: type 16550A, console pcib2: on acpi0 pcib2: could not get PCI interrupt routing table for \_SB_.PCI1 - AE_NOT_FOUND pci2: on pcib2 pci2: physical bus=2 map[10]: type 1, range 32, base f3ff0000, size 12, enabled found-> vendor=0x8086, dev=0x1461, revid=0x03 bus=2, slot=28, func=0 class=08-00-20, hdrtype=0x00, mfdev=0 found-> vendor=0x8086, dev=0x1460, revid=0x03 bus=2, slot=29, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 map[10]: type 1, range 32, base f3fe0000, size 12, enabled found-> vendor=0x8086, dev=0x1461, revid=0x03 bus=2, slot=30, func=0 class=08-00-20, hdrtype=0x00, mfdev=0 found-> vendor=0x8086, dev=0x1460, revid=0x03 bus=2, slot=31, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 pci2: at device 28.0 (no driver attached) pcib3: at device 29.0 on pci2 pcib3: secondary bus 3 pcib3: subordinate bus 4 pcib3: I/O decode 0x6000-0x7fff pcib3: memory decode 0xf4000000-0xf7cfffff pcib3: prefetched decode 0xe7f00000-0xebffffff pci3: on pcib3 pci3: physical bus=3 map[10]: type 1, range 32, base f7cf0000, size 12, enabled map[14]: type 4, range 32, base 00006fc0, size 6, enabled map[18]: type 1, range 32, base f7b00000, size 20, enabled pcib3: matched entry for 3.2.INTA (source ) pcib3: device is hardwired to IRQ 52 found-> vendor=0x8086, dev=0x1229, revid=0x08 bus=3, slot=2, func=0 class=02-00-00, hdrtype=0x00, mfdev=0 intpin=a, irq=52 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type 3, range 64, base e7ff0000, size 8, enabled pcib3: matched entry for 3.31.INTA (source ) pcib3: device is hardwired to IRQ 71 found-> vendor=0x8086, dev=0x1462, revid=0x03 bus=3, slot=31, func=0 class=08-04-00, hdrtype=0x00, mfdev=0 intpin=a, irq=71 fxp0: port 0x6fc0-0x6fff mem 0xf7b00000-0xf7bfffff,0xf7cf0000-0xf7cf0fff irq 52 at device 2.0 on pci3 pcib3: device fxp0 requested decoded memory range 0xf7cf0000-0xf7cf0fff fxp0: using memory space register mapping fxp0: Ethernet address 00:90:27:75:d6:17 fxp0: PCI IDs: 8086 1229 8086 000c 0008 fxp0: Dynamic Standby mode is disabled inphy0: on miibus0 inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto pci3: at device 31.0 (no driver attached) pci2: at device 30.0 (no driver attached) pcib4: at device 31.0 on pci2 pcib4: secondary bus 5 pcib4: subordinate bus 6 pcib4: I/O decode 0x8000-0x9fff pcib4: memory decode 0xf7d00000-0xf9ffffff pcib4: prefetched decode 0xec000000-0xf2ffffff pci5: on pcib4 pci5: physical bus=5 map[10]: type 4, range 32, base 00008e00, size 8, enabled map[14]: type 1, range 64, base f7fd0000, size 16, enabled map[1c]: type 1, range 64, base f7fc0000, size 16, enabled pcib4: matched entry for 5.2.INTA (source ) pcib4: device is hardwired to IRQ 28 found-> vendor=0x1000, dev=0x0030, revid=0x03 bus=5, slot=2, func=0 class=01-00-00, hdrtype=0x00, mfdev=1 intpin=a, irq=28 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type 4, range 32, base 00008f00, size 8, enabled map[14]: type 1, range 64, base f7ff0000, size 16, enabled map[1c]: type 1, range 64, base f7fe0000, size 16, enabled pcib4: matched entry for 5.2.INTB (source ) pcib4: device is hardwired to IRQ 29 found-> vendor=0x1000, dev=0x0030, revid=0x03 bus=5, slot=2, func=1 class=01-00-00, hdrtype=0x00, mfdev=1 intpin=b, irq=29 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type 3, range 64, base f2ff0000, size 8, enabled pcib4: matched entry for 5.31.INTA (source ) pcib4: device is hardwired to IRQ 47 found-> vendor=0x8086, dev=0x1462, revid=0x03 bus=5, slot=31, func=0 class=08-04-00, hdrtype=0x00, mfdev=0 intpin=a, irq=47 mpt0: port 0x8e00-0x8eff mem 0xf7fc0000-0xf7fcffff,0xf7fd0000-0xf7fdffff irq 28 at device 2.0 on pci5 pcib4: device mpt0 requested decoded memory range 0xf7fd0000-0xf7fdffff mpt0: doorbell req = (0x10000000) mpt0: mpt_get_iocfacts: GlobalCredits=255 BlockSize=8 Request Frame Size 24 mpt0: mpt_send_ioc_init ok mpt0: IOC now at RUNSTATE mpt0: enabling async events mpt0: Send Request 255 (0x26d1e00): mpt0: 07000001 00000000 800000ff 55555555 mpt0: 55555555 55555555 55555555 55555555 mpt0: 55555555 55555555 55555555 55555555 mpt0: 55555555 55555555 55555555 55555555 mpt0: enabling port 0 mpt0: Send Request 254 (0x26d1c00): mpt0: 06000000 00000000 800000fe 55555555 mpt0: 55555555 55555555 55555555 55555555 mpt0: 55555555 55555555 55555555 55555555 mpt0: 55555555 55555555 55555555 55555555 Event Notification Reply @ 0xa000000000a42000 IOC Status Success IOCLogInfo 0x00000000 MsgLength 0x08 MsgFlags 0x80 MsgContext 0x800000ff Event: EventChange EventContext 0x0000 AckRequired 0 EventDataLength 1 Continuation 128 mpt0: Address Reply (index 255) mpt0: 07080001 80000000 800000ff 00000000 mpt0: 00000000 0000000a 00000000 00000001 mpt0: deadc0de deadc0de deadc0de deadc0de Port Enable Reply @ 0xa000000000a42080 IOC Status Success IOCLogInfo 0x00000000 MsgLength 0x05 MsgFlags 0x00 MsgContext 0x800000fe Port: 0 mpt0: Address Reply (index 254) mpt0: 06050000 00000000 800000fe 00000000 mpt0: 00000000 deadc0de deadc0de deadc0de mpt0: deadc0de deadc0de deadc0de deadc0de mpt0: enable port reply idx 254 mpt0: enabled port 0 mpt0: enabling interrupts mpt1: port 0x8f00-0x8fff mem 0xf7fe0000-0xf7feffff,0xf7ff0000-0xf7ffffff irq 29 at device 2.1 on pci5 pcib4: device mpt1 requested decoded memory range 0xf7ff0000-0xf7ffffff mpt1: doorbell req = (0x10000000) mpt1: mpt_get_iocfacts: GlobalCredits=255 BlockSize=8 Request Frame Size 24 mpt1: mpt_send_ioc_init ok mpt1: IOC now at RUNSTATE mpt1: enabling async events mpt1: Send Request 255 (0x26f7e00): mpt1: 07000001 00000000 800000ff 55555555 mpt1: 55555555 55555555 55555555 55555555 mpt1: 55555555 55555555 55555555 55555555 mpt1: 55555555 55555555 55555555 55555555 mpt1: enabling port 0 mpt1: Send Request 254 (0x26f7c00): mpt1: 06000000 00000000 800000fe 55555555 mpt1: 55555555 55555555 55555555 55555555 mpt1: 55555555 55555555 55555555 55555555 mpt1: 55555555 55555555 55555555 55555555 Event Notification Reply @ 0xa000000000a46000 IOC Status Success IOCLogInfo 0x00000000 MsgLength 0x08 MsgFlags 0x80 MsgContext 0x800000ff Event: EventChange EventContext 0x0000 AckRequired 0 EventDataLength 1 Continuation 128 mpt1: Address Reply (index 255) mpt1: 07080001 80000000 800000ff 00000000 mpt1: 00000000 0000000a 00000000 00000001 mpt1: deadc0de deadc0de deadc0de deadc0de Port Enable Reply @ 0xa000000000a46080 IOC Status Success IOCLogInfo 0x00000000 MsgLength 0x05 MsgFlags 0x00 MsgContext 0x800000fe Port: 0 mpt1: Address Reply (index 254) mpt1: 06050000 00000000 800000fe 00000000 mpt1: 00000000 deadc0de deadc0de deadc0de mpt1: deadc0de deadc0de deadc0de deadc0de mpt1: enable port reply idx 254 mpt1: enabled port 0 mpt1: enabling interrupts pci5: at device 31.0 (no driver attached) pcib5: on acpi0 pcib5: could not get PCI interrupt routing table for \_SB_.PCI3 - AE_NOT_FOUND pci8: on pcib5 pci8: physical bus=8 map[10]: type 1, range 32, base e1ff0000, size 12, enabled found-> vendor=0x8086, dev=0x1461, revid=0x03 bus=8, slot=28, func=0 class=08-00-20, hdrtype=0x00, mfdev=0 found-> vendor=0x8086, dev=0x1460, revid=0x03 bus=8, slot=29, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 map[10]: type 1, range 32, base e1fe0000, size 12, enabled found-> vendor=0x8086, dev=0x1461, revid=0x03 bus=8, slot=30, func=0 class=08-00-20, hdrtype=0x00, mfdev=0 found-> vendor=0x8086, dev=0x1460, revid=0x03 bus=8, slot=31, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 pci8: at device 28.0 (no driver attached) pcib6: at device 29.0 on pci8 pcib6: secondary bus 9 pcib6: subordinate bus 10 pcib6: I/O decode 0xa000-0xafff pcib6: memory decode 0xe2000000-0xe3ffffff pcib6: prefetched decode 0xd7f00000-0xdbffffff pci9: on pcib6 pci9: physical bus=9 map[10]: type 3, range 64, base d7ff0000, size 8, enabled pcib6: matched entry for 9.31.INTA (source ) pcib6: device is hardwired to IRQ 119 found-> vendor=0x8086, dev=0x1462, revid=0x03 bus=9, slot=31, func=0 class=08-04-00, hdrtype=0x00, mfdev=0 intpin=a, irq=119 pci9: at device 31.0 (no driver attached) pci8: at device 30.0 (no driver attached) pcib7: at device 31.0 on pci8 pcib7: secondary bus 11 pcib7: subordinate bus 12 pcib7: I/O decode 0xb000-0xcfff pcib7: memory decode 0xe4000000-0xe6ffffff pcib7: prefetched decode 0xdc000000-0xe0ffffff pci11: on pcib7 pci11: physical bus=11 map[10]: type 4, range 32, base 0000be00, size 8, enabled map[14]: type 1, range 32, base e6ff0000, size 12, enabled pcib7: matched entry for 11.2.INTA (source ) pcib7: device is hardwired to IRQ 76 found-> vendor=0x1077, dev=0x1280, revid=0x03 bus=11, slot=2, func=0 class=01-00-00, hdrtype=0x00, mfdev=0 intpin=a, irq=76 powerspec 1 supports D0 D3 current D0 map[10]: type 3, range 64, base e0ff0000, size 8, enabled pcib7: matched entry for 11.31.INTA (source ) pcib7: device is hardwired to IRQ 95 found-> vendor=0x8086, dev=0x1462, revid=0x03 bus=11, slot=31, func=0 class=08-04-00, hdrtype=0x00, mfdev=0 intpin=a, irq=95 Qlogic ISP Driver, FreeBSD Version 5.9, Core Version 2.7 isp0: port 0xbe00-0xbeff mem 0xe6ff0000-0xe6ff0fff irq 76 at device 2.0 on pci11 pcib7: device isp0 requested decoded I/O range 0xbe00-0xbeff isp0: using I/O space register mapping isp0: bus 0 is in LVD Mode isp0: bus 1 is in LVD Mode isp0: Board Type 1280, Chip Revision 0x3, resident F/W Revision 8.15.5 isp0: Last F/W revision was 8.15.5 isp0: 527 max I/O commands supported isp0: Initiator ID is 7 on Channel 0 isp0: Initiator ID is 7 on Channel 1 isp0: Enabled FW features (0xa) pci11: at device 31.0 (no driver attached) pcib8: on acpi0 pcib8: could not get PCI interrupt routing table for \_SB_.PCI4 - AE_NOT_FOUND pci13: on pcib8 pci13: physical bus=13 map[10]: type 1, range 32, base d1ff0000, size 12, enabled found-> vendor=0x8086, dev=0x1461, revid=0x03 bus=13, slot=28, func=0 class=08-00-20, hdrtype=0x00, mfdev=0 found-> vendor=0x8086, dev=0x1460, revid=0x03 bus=13, slot=29, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 map[10]: type 1, range 32, base d1fe0000, size 12, enabled found-> vendor=0x8086, dev=0x1461, revid=0x03 bus=13, slot=30, func=0 class=08-00-20, hdrtype=0x00, mfdev=0 found-> vendor=0x8086, dev=0x1460, revid=0x03 bus=13, slot=31, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 pci13: at device 28.0 (no driver attached) pcib9: at device 29.0 on pci13 pcib9: secondary bus 14 pcib9: subordinate bus 15 pcib9: I/O decode 0xd000-0xdfff pcib9: memory decode 0xd2000000-0xd3ffffff pcib9: prefetched decode 0xc7f00000-0xcbffffff pci14: on pcib9 pci14: physical bus=14 map[10]: type 3, range 64, base c7ff0000, size 8, enabled pcib9: matched entry for 14.31.INTA (source ) pcib9: device is hardwired to IRQ 167 found-> vendor=0x8086, dev=0x1462, revid=0x03 bus=14, slot=31, func=0 class=08-04-00, hdrtype=0x00, mfdev=0 intpin=a, irq=167 pci14: at device 31.0 (no driver attached) pci13: at device 30.0 (no driver attached) pcib10: at device 31.0 on pci13 pcib10: secondary bus 16 pcib10: subordinate bus 17 pcib10: I/O decode 0xe000-0xefff pcib10: memory decode 0xd4000000-0xd6ffffff pcib10: prefetched decode 0xcc000000-0xd0ffffff pci16: on pcib10 pci16: physical bus=16 map[10]: type 3, range 64, base d0ff0000, size 8, enabled pcib10: matched entry for 16.31.INTA (source ) pcib10: device is hardwired to IRQ 143 found-> vendor=0x8086, dev=0x1462, revid=0x03 bus=16, slot=31, func=0 class=08-04-00, hdrtype=0x00, mfdev=0 intpin=a, irq=143 pci16: at device 31.0 (no driver attached) acpi_timer0: <24-bit timer at 3.579545MHz> port 0xc08-0xc0b on acpi0 unknown: not probed (disabled) unknown: not probed (disabled) unknown: not probed (disabled) unknown: not probed (disabled) unknown: not probed (disabled) unknown: not probed (disabled) unknown: not probed (disabled) unknown: not probed (disabled) unknown: not probed (disabled) unknown: not probed (disabled) sio: sio0 already exists; skipping it sio: sio1 already exists; skipping it Trying Read_Port at 203 Trying Read_Port at 243 Trying Read_Port at 283 Trying Read_Port at 2c3 Trying Read_Port at 303 Trying Read_Port at 343 Trying Read_Port at 383 Trying Read_Port at 3c3 sc: sc0 already exists; skipping it vga: vga0 already exists; skipping it isa_probe_children: disabling PnP devices isa_probe_children: probing non-PnP devices orm0: