EFI Boot Manager ver 1.02 [12.38]

Please select a boot option

    FreeBSD/ia64                                                    
    FreeBSD/i386                                                    
    EFI Shell                                                       
    CDROM Boot                                                      
    Legacy Boot A:                                                  
    Floppy Boot                                                     
    Boot option maintenance menu                                    


    Use  and  to change option(s). Use Enter to select an option
Loading.: FreeBSD/ia64                                              
Starting: FreeBSD/ia64
Console: EFI console

FreeBSD/ia64 EFI boot, Revision 0.1
(peter@overcee.netplex.com.au, Mon Oct 22 01:17:12 PDT 2001)
|
can't load 'kernel'

Type '?' for a list of commands, 'help' for more detailed help.
ok ls
/
 d  boot
    kernel.gcc3
    kernel.gcc4
    nloader.efi
    kernel.gcc5
    kernel.gcc
    kernel.gcc6
    kernel.gcc7
    kernel.gcc8
ok boot /kernel.gcc8 -s
/kernel.gcc8 data=0x558f28+0x72a50 syms=[0x8+0x43d58+0x8+0x37d08]
Entering /kernel.gcc8 at 0xe00000000050a000...
ACPI debug layer 0x0  debug level 0x0
Copyright (c) 1992-2001 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD 5.0-CURRENT #5: Mon Nov 12 00:08:20 PST 2001
    peter@overcee.netplex.com.au:/home/peter/fbp4/ia64/sys/ia64/compile/SMALL
Preloaded elf kernel "/kernel.gcc8" at 0xe000000000b4a000.
CPU: Itanium (800.03-Mhz)
  Origin = "GenuineIntel"  Model = 0  Revision = 4
  Features = 0x0
real memory  = 1056227328 (1031472K bytes)
avail memory = 1017970688 (994112K bytes)
acpi0: <Intel  W460GXBS> on motherboard
acpi0: power button is handled as a fixed feature programming model.
Timecounter "ACPI"  frequency 3579545 Hz
acpi_cpu0: <CPU> on acpi0
acpi_cpu1: <CPU> on acpi0
acpi_pcib0: <Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <PCI bus> on acpi_pcib0
pci0: <base peripheral, interrupt controller> at device 0.0 (no driver attached)
pci0: <display, VGA> at device 1.0 (no driver attached)
isp0: <Qlogic ISP 1280 PCI SCSI Adapter> port 0x1000-0x10ff mem 0xf7ea9000-0xf7ea9fff irq 39 at device 2.0 on pci0
isab0: <PCI-ISA bridge> at device 3.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH ATA66 controller> port 0x1270-0x127f at device 3.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
uhci0: <Intel 82372FB/82468GX USB controller> port 0x1240-0x125f irq 47 at device 3.2 on pci0
usb0: <Intel 82372FB/82468GX USB controller> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhub1: Standard Microsystems Corp USB Hub, class 9/0, rev 1.10/0.00, addr 2
device_probe_and_attach: uhub1 attach returned 6
uhub1: Standard Microsystems Corp USB Hub, class 9/0, rev 1.10/0.00, addr 2
device_probe_and_attach: uhub1 attach returned 6
pci0: <serial bus, SMBus> at device 3.3 (no driver attached)
pci0: <multimedia, audio> at device 4.0 (no driver attached)
pci0: <bridge, HOST-PCI> at device 16.0 (no driver attached)
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0 port 0x3f8-0x3ff irq 4 on acpi0
sio0: type 16550A, console
acpi_pcib1: <Host-PCI bridge> on acpi0
pci1: <PCI bus> on acpi_pcib1
pci1: <base peripheral> at device 15.0 (no driver attached)
acpi_pcib2: <Host-PCI bridge> on acpi0
pci2: <PCI bus> on acpi_pcib2
fxp0: <Intel Pro 10/100B/100+ Ethernet> port 0x2000-0x203f mem 0xeff00000-0xefffffff,0xefdff000-0xefdfffff irq 27 at device 0.0 on pci2
fxp0: Ethernet address 00:d0:b7:af:cb:3b
inphy0: <i82555 10/100 media interface> on miibus0
inphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
pci2: <base peripheral> at device 15.0 (no driver attached)
acpi_pcib3: <Host-PCI bridge> on acpi0
pci3: <PCI bus> on acpi_pcib3
acpi_timer0: <24-bit timer at 3.579545MHz> port 0xa08-0xa0b on acpi0
sio-: sio0 already exists, skipping it
orm0: <Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xca7ff,0xca800-0xcb7ff on isa0
Timecounter "IA64 ITC"  frequency 800029008 Hz
acpi_cpu: CPU throttling enabled, 8 steps from 100% to 12.5%
afd0: 120MB <LS-120 F200 08 UHD Floppy> [963/8/32] at ata0-master PIO2
acd0: CDROM <LTN483> at ata1-master PIO4
Waiting 2 seconds for SCSI devices to settle
Mounting root from ufs:da1s2a
da0 at isp0 bus 0 target 0 lun 0
da0: <QUANTUM ATLAS IV 9 WLS 0B0B> Fixed Direct Access SCSI-3 device 
da0: 80.000MB/s transfers (40.000MHz, offset 8, 16bit), Tagged Queueing Enabled
da0: 8761MB (17942584 512 byte sectors: 255H 63S/T 1116C)
da1 at isp0 bus 0 target 1 lun 0
da1: <IBM DDYS-T18350N S80D> Fixed Direct Access SCSI-3 device 
da1: 80.000MB/s transfers (40.000MHz, offset 8, 16bit), Tagged Queueing Enabled
da1: 17501MB (35843670 512 byte sectors: 255H 63S/T 2231C)
Enter full pathname of shell or RETURN for /bin/sh: 
# fsck -p
/dev/da1s2a: FILESYSTEM CLEAN; SKIPPING CHECKS
/dev/da1s2a: clean, 160918 free (150 frags, 20096 blocks, 0.1% fragmentation)
/dev/da1s2e: FILESYSTEM CLEAN; SKIPPING CHECKS
/dev/da1s2e: clean, 835634 free (4178 frags, 103932 blocks, 0.4% fragmentation)
/dev/da1s2f: FILESYSTEM CLEAN; SKIPPING CHECKS
/dev/da1s2f: clean, 253776 free (72 frags, 31713 blocks, 0.0% fragmentation)
/dev/da1s2g: FILESYSTEM CLEAN; SKIPPING CHECKS
/dev/da1s2g: clean, 235731 free (11 frags, 29465 blocks, 0.0% fragmentation)
/dev/da1s2h: FILESYSTEM CLEAN; SKIPPING CHECKS
/dev/da1s2h: clean, 10822878 free (2454 frags, 1352553 blocks, 0.0% fragmentation)
# ^D
Entropy harvesting: interrupts ethernet point_to_point.
swapon: adding /dev/da1s2b as swap device
Skipping disk checks ...
Doing initial network setup: host.conf hostname.
fxp0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
        inet 10.0.0.21 netmask 0xffffff00 broadcast 10.0.0.255
        ether 00:d0:b7:af:cb:3b 
        media: Ethernet autoselect (100baseTX <full-duplex>)
        status: active
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
        inet 127.0.0.1 netmask 0xff000000 
add net default: gateway 10.0.0.1
Additional routing options: TCP keepalive=YES.
Routing daemons:.
Additional daemons: syslogd.
Doing additional network setup: ntpdate.
Starting final network daemons:.
ELF ldconfig path: /usr/lib /usr/lib/compat /usr/local/lib
Starting standard daemons: inetd cron sshd sendmail.
Initial rc.ia64 initialization:.
Configuring syscons: .
Additional ABI support:.
Local package initialization:.
Additional TCP options:.
Starting background filesystem checks

Mon Nov 12 00:30:01 PST 2001

FreeBSD/ia64 (ia64.wemm.org) (ttyd0)

login: