ACPI debug layer 0x0 debug level 0x0 Copyright (c) 1992-2003 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 5.1-CURRENT #40: Wed Nov 19 12:17:12 PST 2003 peter@overcee.wemm.org:/home/src/sys/amd64/compile/OVERCEE Preloaded elf kernel "/boot/kernel/kernel" at 0xffffffff806b4000. Calibrating clock(s) ... i8254 clock: 1193204 Hz CLK_USE_I8254_CALIBRATION not specified - using default frequency Timecounter "i8254" frequency 1193182 Hz quality 0 Calibrating TSC clock ... TSC clock: 2200011146 Hz CPU: AMD Athlon(tm) 64 FX-51 Processor (2200.01-MHz K8-class CPU) Origin = "AuthenticAMD" Id = 0xf58 Stepping = 8 Features=0x78bfbff AMD Features=0xe0500000 Data TLB: 32 entries, fully associative Instruction TLB: 32 entries, fully associative L1 data cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative L1 instruction cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative L2 internal cache: 1024 kbytes, 64 bytes/line, 1 lines/tag, 8-way associative real memory = 1072955392 (1023 MB) Physical memory chunk(s): 0x0000000000001000 - 0x000000000009efff, 647168 bytes (158 pages) 0x000000000073a000 - 0x000000003e0e8fff, 1033564160 bytes (252335 pages) avail memory = 1011224576 (964 MB) ACPI APIC Table: APIC: CPU 0 has ACPI ID 1 MADT: Found IO APIC ID 1, Vector 0 at 0xfec00000 ioapic0: intpin 0 -> ExtINT (edge, activehi) ioapic0: intpin 1 -> irq 1 (edge, activehi) ioapic0: intpin 2 -> irq 2 (edge, activehi) ioapic0: intpin 3 -> irq 3 (edge, activehi) ioapic0: intpin 4 -> irq 4 (edge, activehi) ioapic0: intpin 5 -> irq 5 (edge, activehi) ioapic0: intpin 6 -> irq 6 (edge, activehi) ioapic0: intpin 7 -> irq 7 (edge, activehi) ioapic0: intpin 8 -> irq 8 (edge, activehi) ioapic0: intpin 9 -> irq 9 (edge, activehi) ioapic0: intpin 10 -> irq 10 (edge, activehi) ioapic0: intpin 11 -> irq 11 (edge, activehi) ioapic0: intpin 12 -> irq 12 (edge, activehi) ioapic0: intpin 13 -> irq 13 (edge, activehi) ioapic0: intpin 14 -> irq 14 (edge, activehi) ioapic0: intpin 15 -> irq 15 (edge, activehi) ioapic0: intpin 16 -> irq 16 (level, activelo) ioapic0: intpin 17 -> irq 17 (level, activelo) ioapic0: intpin 18 -> irq 18 (level, activelo) ioapic0: intpin 19 -> irq 19 (level, activelo) ioapic0: intpin 20 -> irq 20 (level, activelo) ioapic0: intpin 21 -> irq 21 (level, activelo) ioapic0: intpin 22 -> irq 22 (level, activelo) ioapic0: intpin 23 -> irq 23 (level, activelo) MADT: intr override: source 0, irq 2 ioapic0: Routing IRQ 0 -> intpin 2 ioapic0: intpin 2 trigger: edge ioapic0: intpin 2 polarity: active-hi MADT: intr override: source 9, irq 9 ioapic0: intpin 9 trigger: level ioapic0: intpin 9 polarity: active-hi MADT: intr override: source 14, irq 14 ioapic0: intpin 14 trigger: edge ioapic0: intpin 14 polarity: active-hi MADT: intr override: source 15, irq 15 ioapic0: intpin 15 trigger: edge ioapic0: intpin 15 polarity: active-hi ioapic0 irqs 0-23 on motherboard cpu0 BSP: ID: 0x00000000 VER: 0x00040010 LDR: 0x01000000 DFR: 0x0fffffff lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff random: mem: Pentium Pro MTRR support enabled null: acpi0: on motherboard pci_open(1): mode 1 addr port (0x0cf8) is 0x80020014 pci_open(1a): mode1res=0x80000000 (0x80000000) pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=00d110de) AcpiOsDerivePciId: bus 0 dev 1 func 0 acpi0: Power Button (fixed) ACPI timer looks BAD min = 4, max = 18, width = 14 ACPI timer looks GOOD min = 4, max = 5, width = 1 ACPI timer looks GOOD min = 4, max = 5, width = 1 ACPI timer looks GOOD min = 4, max = 5, width = 1 ACPI timer looks BAD min = 4, max = 17, width = 13 ACPI timer looks GOOD min = 4, max = 5, width = 1 ACPI timer looks GOOD min = 4, max = 5, width = 1 ACPI timer looks BAD min = 4, max = 17, width = 13 ACPI timer looks GOOD min = 4, max = 5, width = 1 ACPI timer looks GOOD min = 4, max = 5, width = 1 Timecounter "ACPI-safe" frequency 3579545 Hz quality 1000 mss_probe: no address given, try 0x530 mss_detect, busy still set (0xff) acpi_cpu0: port 0x530-0x537 on acpi0 pcib0: port 0xcf8-0xcff on acpi0 BITEME: acpi_pci_link_get_irq_resources: Invalid IRQ 0 BITEME: acpi_pci_link_get_current_irq: PCI interrupt link device _CRS data is corrupted - \\_SB_.LKSM BITEME: acpi_pci_link_add_link: couldn't get current IRQ from PCI interrupt link \\_SB_.LKSM - AE_NULL_ENTRY BITEME: acpi_pci_link_add_link: initial IRQ 0 is invalid for link \\_SB_.LKSM \\_SB_.LKSM: initial IRQ of 0 is bogus BITEME: acpi_pci_link_add_link: initial IRQ 11 is invalid for link \\_SB_.LUS0 \\_SB_.LUS0: initial IRQ of 11 is bogus BITEME: acpi_pci_link_add_link: initial IRQ 11 is invalid for link \\_SB_.LAUI \\_SB_.LAUI: initial IRQ of 11 is bogus BITEME: acpi_pci_link_get_irq_resources: Invalid IRQ 0 BITEME: acpi_pci_link_get_current_irq: PCI interrupt link device _CRS data is corrupted - \\_SB_.LKMO BITEME: acpi_pci_link_add_link: couldn't get current IRQ from PCI interrupt link \\_SB_.LKMO - AE_NULL_ENTRY BITEME: acpi_pci_link_add_link: initial IRQ 0 is invalid for link \\_SB_.LKMO \\_SB_.LKMO: initial IRQ of 0 is bogus BITEME: acpi_pci_link_add_link: initial IRQ 5 is invalid for link \\_SB_.LUS1 \\_SB_.LUS1: initial IRQ of 5 is bogus BITEME: acpi_pci_link_add_link: initial IRQ 10 is invalid for link \\_SB_.LUS2 \\_SB_.LUS2: initial IRQ of 10 is bogus BITEME: acpi_pci_link_add_link: initial IRQ 11 is invalid for link \\_SB_.LNKE \\_SB_.LNKE: initial IRQ of 11 is bogus BITEME: acpi_pci_link_get_irq_resources: Invalid IRQ 0 BITEME: acpi_pci_link_get_current_irq: PCI interrupt link device _CRS data is corrupted - \\_SB_.LKLN BITEME: acpi_pci_link_add_link: couldn't get current IRQ from PCI interrupt link \\_SB_.LKLN - AE_NULL_ENTRY BITEME: acpi_pci_link_add_link: initial IRQ 0 is invalid for link \\_SB_.LKLN \\_SB_.LKLN: initial IRQ of 0 is bogus ---- initial configuration ------------------------ \\_SB_.LKSM irq 0: [ 22] high,level,sharable 0.1.0 \\_SB_.LUS0 irq 0: [ 20] high,level,sharable 0.2.0 \\_SB_.LAUI irq 0: [ 21] high,level,sharable 0.6.0 \\_SB_.LKMO irq 0: [ 21] high,level,sharable 0.6.1 \\_SB_.LUS1 irq 0: [ 20] high,level,sharable 0.2.1 \\_SB_.LUS2 irq 0: [ 20] high,level,sharable 0.2.2 \\_SB_.LNKE irq 0: [ 16] high,level,sharable 0.11.0 \\_SB_.LNKE irq 0: [ 16] high,level,sharable 0.11.1 \\_SB_.LNKE irq 0: [ 16] high,level,sharable 0.11.2 \\_SB_.LNKE irq 0: [ 16] high,level,sharable 0.11.3 \\_SB_.LKLN irq 0: [ 21] high,level,sharable 0.5.0 ---- before setting priority for links ------------ \\_SB_.LKSM: interrupts: 22 penalty: 110 references: 1 priority: 0 \\_SB_.LUS0: interrupts: 20 penalty: 330 references: 1 priority: 0 \\_SB_.LAUI: interrupts: 21 penalty: 330 references: 1 priority: 0 \\_SB_.LKMO: interrupts: 21 penalty: 330 references: 1 priority: 0 \\_SB_.LUS1: interrupts: 20 penalty: 330 references: 1 priority: 0 \\_SB_.LUS2: interrupts: 20 penalty: 330 references: 1 priority: 0 \\_SB_.LNKE: interrupts: 16 penalty: 440 references: 4 priority: 0 \\_SB_.LKLN: interrupts: 21 penalty: 330 references: 1 priority: 0 ---- before fixup boot-disabled links ------------- \\_SB_.LNKE: interrupts: 16 penalty: 440 references: 4 priority: 1760 \\_SB_.LUS0: interrupts: 20 penalty: 330 references: 1 priority: 330 \\_SB_.LAUI: interrupts: 21 penalty: 330 references: 1 priority: 330 \\_SB_.LKMO: interrupts: 21 penalty: 330 references: 1 priority: 330 \\_SB_.LUS1: interrupts: 20 penalty: 330 references: 1 priority: 330 \\_SB_.LUS2: interrupts: 20 penalty: 330 references: 1 priority: 330 \\_SB_.LKLN: interrupts: 21 penalty: 330 references: 1 priority: 330 \\_SB_.LKSM: interrupts: 22 penalty: 110 references: 1 priority: 110 ---- after fixup boot-disabled links -------------- \\_SB_.LNKE: interrupts: 16 penalty: 440 references: 4 priority: 1760 \\_SB_.LUS0: interrupts: 20 penalty: 330 references: 1 priority: 330 \\_SB_.LAUI: interrupts: 21 penalty: 330 references: 1 priority: 330 \\_SB_.LKMO: interrupts: 21 penalty: 330 references: 1 priority: 330 \\_SB_.LUS1: interrupts: 20 penalty: 330 references: 1 priority: 330 \\_SB_.LUS2: interrupts: 20 penalty: 330 references: 1 priority: 330 \\_SB_.LKLN: interrupts: 21 penalty: 330 references: 1 priority: 330 \\_SB_.LKSM: interrupts: 22 penalty: 110 references: 1 priority: 110 ---- arbitrated configuration --------------------- \\_SB_.LKSM irq 0: [ 22] high,level,sharable 0.1.0 \\_SB_.LUS0 irq 0: [ 20] high,level,sharable 0.2.0 \\_SB_.LAUI irq 0: [ 21] high,level,sharable 0.6.0 \\_SB_.LKMO irq 0: [ 21] high,level,sharable 0.6.1 \\_SB_.LUS1 irq 0: [ 20] high,level,sharable 0.2.1 \\_SB_.LUS2 irq 0: [ 20] high,level,sharable 0.2.2 \\_SB_.LNKE irq 0: [ 16] high,level,sharable 0.11.0 \\_SB_.LNKE irq 0: [ 16] high,level,sharable 0.11.1 \\_SB_.LNKE irq 0: [ 16] high,level,sharable 0.11.2 \\_SB_.LNKE irq 0: [ 16] high,level,sharable 0.11.3 \\_SB_.LKLN irq 0: [ 21] high,level,sharable 0.5.0 pci0: on pcib0 pci0: physical bus=0 map[10]: type 3, range 32, base f0000000, size 27, enabled found-> vendor=0x10de, dev=0x00d1, revid=0xa4 bus=0, slot=0, func=0 class=06-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0106, statreg=0x00b0, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x10de, dev=0x00d0, revid=0xf6 bus=0, slot=1, func=0 class=06-01-00, hdrtype=0x00, mfdev=1 cmdreg=0x000f, statreg=0x00a0, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) map[20]: type 4, range 32, base 00005000, size 6, enabled map[24]: type 4, range 32, base 00005040, size 6, enabled found-> vendor=0x10de, dev=0x00d4, revid=0xa4 bus=0, slot=1, func=1 class=0c-05-00, hdrtype=0x00, mfdev=1 cmdreg=0x0001, statreg=0x00b0, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x01 (250 ns) intpin=a, irq=255 powerspec 2 supports D0 D3 current D0 map[10]: type 1, range 32, base ff6fd000, size 12, enabled pcib0: matched entry for 0.2.INTA (source \\_SB_.LUS0) pcib0: slot 2 INTA is routed to irq 11 found-> vendor=0x10de, dev=0x00d7, revid=0xa5 bus=0, slot=2, func=0 class=0c-03-10, hdrtype=0x00, mfdev=1 cmdreg=0x0007, statreg=0x00b0, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x01 (250 ns) intpin=a, irq=11 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type 1, range 32, base ff6fe000, size 12, enabled pcib0: matched entry for 0.2.INTB (source \\_SB_.LUS1) pcib0: slot 2 INTB is routed to irq 5 found-> vendor=0x10de, dev=0x00d7, revid=0xa5 bus=0, slot=2, func=1 class=0c-03-10, hdrtype=0x00, mfdev=1 cmdreg=0x0007, statreg=0x00b0, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x01 (250 ns) intpin=b, irq=5 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type 1, range 32, base ff6ffc00, size 8, enabled pcib0: matched entry for 0.2.INTC (source \\_SB_.LUS2) pcib0: slot 2 INTC is routed to irq 10 found-> vendor=0x10de, dev=0x00d8, revid=0xa2 bus=0, slot=2, func=2 class=0c-03-20, hdrtype=0x00, mfdev=1 cmdreg=0x0006, statreg=0x00b0, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x01 (250 ns) intpin=c, irq=10 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type 4, range 32, base 0000e800, size 8, enabled map[14]: type 4, range 32, base 0000ec00, size 7, enabled map[18]: type 1, range 32, base ff6fc000, size 12, enabled pcib0: matched entry for 0.6.INTA (source \\_SB_.LAUI) pcib0: slot 6 INTA is routed to irq 11 found-> vendor=0x10de, dev=0x00da, revid=0xa2 bus=0, slot=6, func=0 class=04-01-00, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x00b0, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x02 (500 ns), maxlat=0x05 (1250 ns) intpin=a, irq=11 powerspec 2 supports D0 D1 D2 D3 current D0 map[20]: type 4, range 32, base 0000ffa0, size 4, enabled found-> vendor=0x10de, dev=0x00d5, revid=0xa5 bus=0, slot=8, func=0 class=01-01-8a, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x00b0, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x01 (250 ns) powerspec 2 supports D0 D3 current D0 found-> vendor=0x10de, dev=0x00dd, revid=0xa2 bus=0, slot=10, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0107, statreg=0x00a0, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x00 (0 ns) found-> vendor=0x10de, dev=0x00d2, revid=0xa4 bus=0, slot=11, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0107, statreg=0x0220, cachelnsz=0 (dwords) lattimer=0x10 (480 ns), mingnt=0x0b (2750 ns), maxlat=0x00 (0 ns) found-> vendor=0x1022, dev=0x1100, revid=0x00 bus=0, slot=24, func=0 class=06-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0000, statreg=0x0010, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x1022, dev=0x1101, revid=0x00 bus=0, slot=24, func=1 class=06-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x1022, dev=0x1102, revid=0x00 bus=0, slot=24, func=2 class=06-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x1022, dev=0x1103, revid=0x00 bus=0, slot=24, func=3 class=06-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) isab0: at device 1.0 on pci0 isa0: on isab0 pci0: at device 1.1 (no driver attached) ohci0: mem 0xff6fd000-0xff6fdfff irq 11 at device 2.0 on pci0 ohci0: (New OHCI DeviceId=0x00d710de) usb0: OHCI version 1.0, legacy support usb0: SMM does not respond, resetting usb0: on ohci0 usb0: USB revision 1.0 uhub0: (0x10de) OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 3 ports with 3 removable, self powered ohci1: mem 0xff6fe000-0xff6fefff irq 5 at device 2.1 on pci0 ohci1: (New OHCI DeviceId=0x00d710de) usb1: OHCI version 1.0, legacy support usb1: SMM does not respond, resetting usb1: on ohci1 usb1: USB revision 1.0 uhub1: (0x10de) OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 3 ports with 3 removable, self powered ehci0: mem 0xff6ffc00-0xff6ffcff irq 10 at device 2.2 on pci0 ehci0: (New EHCI DeviceId=0x00d810de) ehci_pci_attach: companion usb0 ehci_pci_attach: companion usb1 usb2: EHCI version 1.0 usb2: companion controllers, 4 ports each: usb0 usb1 usb2: on ehci0 usb2: USB revision 2.0 uhub2: (0x10de) EHCI root hub, class 9/0, rev 2.00/1.00, addr 1 uhub2: 6 ports with 6 removable, self powered pcm0: port 0xec00-0xec7f,0xe800-0xe8ff mem 0xff6fc000-0xff6fcfff irq 11 at device 6.0 on pci0 pcm0: pcm0: Codec features 20 bit DAC, 18 bit ADC, 5 bit master volume, Realtek 3D Stereo Enhancement pcm0: Primary codec extended features variable rate PCM, double rate PCM, reserved 1, center DAC, surround DAC, LFE DAC, reserved 4 pcm0: sndbuf_setmap a01000, 4000; 0xffffffffa204b000 -> a01000 pcm0: sndbuf_setmap a11000, 4000; 0xffffffffa204f000 -> a11000 atapci0: port 0xffa0-0xffaf at device 8.0 on pci0 ata0: reset tp1 mask=03 ostat0=20 ostat1=30 ata0-master: stat=0x20 err=0x20 lsb=0x20 msb=0x20 ata0-slave: stat=0x30 err=0x30 lsb=0x30 msb=0x30 ata0: reset tp2 mask=03 stat0=20 stat1=30 devices=0x0 ata0: at 0x1f0 irq 14 on atapci0 ata0: [MPSAFE] ata1: reset tp1 mask=03 ostat0=20 ostat1=30 ata1-master: stat=0x20 err=0x20 lsb=0x20 msb=0x20 ata1-slave: stat=0x30 err=0x30 lsb=0x30 msb=0x30 ata1: reset tp2 mask=03 stat0=20 stat1=30 devices=0x0 ata1: at 0x170 irq 15 on atapci0 ata1: [MPSAFE] pcib1: at device 10.0 on pci0 pcib1: secondary bus 1 pcib1: subordinate bus 1 pcib1: I/O decode 0xc000-0xcfff pcib1: memory decode 0xff400000-0xff4fffff pcib1: prefetched decode 0xfff00000-0xfffff BITEME: acpi_pci_link_get_irq_resources: Invalid IRQ 0 BITEME: acpi_pci_link_get_current_irq: PCI interrupt link device _CRS data is corrupted - \\_SB_.LNKA BITEME: acpi_pci_link_add_link: couldn't get current IRQ from PCI interrupt link \\_SB_.LNKA - AE_NULL_ENTRY BITEME: acpi_pci_link_add_link: initial IRQ 0 is invalid for link \\_SB_.LNKA \\_SB_.LNKA: initial IRQ of 0 is bogus BITEME: acpi_pci_link_get_irq_resources: Invalid IRQ 0 BITEME: acpi_pci_link_get_current_irq: PCI interrupt link device _CRS data is corrupted - \\_SB_.LNKB BITEME: acpi_pci_link_add_link: couldn't get current IRQ from PCI interrupt link \\_SB_.LNKB - AE_NULL_ENTRY BITEME: acpi_pci_link_add_link: initial IRQ 0 is invalid for link \\_SB_.LNKB \\_SB_.LNKB: initial IRQ of 0 is bogus BITEME: acpi_pci_link_add_link: initial IRQ 5 is invalid for link \\_SB_.LNKC \\_SB_.LNKC: initial IRQ of 5 is bogus BITEME: acpi_pci_link_add_link: initial IRQ 5 is invalid for link \\_SB_.LNKD \\_SB_.LNKD: initial IRQ of 5 is bogus ---- initial configuration ------------------------ \\_SB_.LNKA irq 0: [ 17] high,level,sharable 1.3.0 \\_SB_.LNKB irq 0: [ 18] high,level,sharable 1.3.1 \\_SB_.LNKC irq 0: [ 19] high,level,sharable 1.3.2 \\_SB_.LNKD irq 0: [ 17] high,level,sharable 1.3.3 \\_SB_.LNKB irq 0: [ 18] high,level,sharable 1.4.0 \\_SB_.LNKC irq 0: [ 19] high,level,sharable 1.4.1 \\_SB_.LNKD irq 0: [ 17] high,level,sharable 1.4.2 \\_SB_.LNKA irq 0: [ 17] high,level,sharable 1.4.3 \\_SB_.LNKC irq 0: [ 19] high,level,sharable 1.5.0 \\_SB_.LNKD irq 0: [ 17] high,level,sharable 1.5.1 \\_SB_.LNKA irq 0: [ 17] high,level,sharable 1.5.2 \\_SB_.LNKB irq 0: [ 18] high,level,sharable 1.5.3 \\_SB_.LNKD irq 0: [ 17] high,level,sharable 1.6.0 \\_SB_.LNKA irq 0: [ 17] high,level,sharable 1.6.1 \\_SB_.LNKB irq 0: [ 18] high,level,sharable 1.6.2 \\_SB_.LNKC irq 0: [ 19] high,level,sharable 1.6.3 \\_SB_.LNKA irq 0: [ 17] high,level,sharable 1.7.0 \\_SB_.LNKB irq 0: [ 18] high,level,sharable 1.7.1 \\_SB_.LNKC irq 0: [ 19] high,level,sharable 1.7.2 \\_SB_.LNKD irq 0: [ 17] high,level,sharable 1.7.3 \\_SB_.LNKC irq 0: [ 19] high,level,sharable 1.8.0 \\_SB_.LNKD irq 0: [ 17] high,level,sharable 1.9.0 ---- before setting priority for links ------------ \\_SB_.LNKE: interrupts: 16 penalty: 440 references: 4 priority: 1760 \\_SB_.LUS0: interrupts: 20 penalty: 330 references: 1 priority: 330 \\_SB_.LAUI: interrupts: 21 penalty: 330 references: 1 priority: 330 \\_SB_.LKMO: interrupts: 21 penalty: 330 references: 1 priority: 330 \\_SB_.LUS1: interrupts: 20 penalty: 330 references: 1 priority: 330 \\_SB_.LUS2: interrupts: 20 penalty: 330 references: 1 priority: 330 \\_SB_.LKLN: interrupts: 21 penalty: 330 references: 1 priority: 330 \\_SB_.LKSM: interrupts: 22 penalty: 110 references: 1 priority: 110 \\_SB_.LNKA: interrupts: 17 penalty: 1210 references: 5 priority: 0 \\_SB_.LNKB: interrupts: 18 penalty: 550 references: 5 priority: 0 \\_SB_.LNKC: interrupts: 19 penalty: 660 references: 6 priority: 0 \\_SB_.LNKD: interrupts: 17 penalty: 1210 references: 6 priority: 0 ---- before fixup boot-disabled links ------------- \\_SB_.LNKD: interrupts: 17 penalty: 1210 references: 6 priority: 7260 \\_SB_.LNKA: interrupts: 17 penalty: 1210 references: 5 priority: 6050 \\_SB_.LNKC: interrupts: 19 penalty: 660 references: 6 priority: 3960 \\_SB_.LNKB: interrupts: 18 penalty: 550 references: 5 priority: 2750 \\_SB_.LNKE: interrupts: 16 penalty: 440 references: 4 priority: 1760 \\_SB_.LUS0: interrupts: 20 penalty: 330 references: 1 priority: 330 \\_SB_.LAUI: interrupts: 21 penalty: 330 references: 1 priority: 330 \\_SB_.LKMO: interrupts: 21 penalty: 330 references: 1 priority: 330 \\_SB_.LUS1: interrupts: 20 penalty: 330 references: 1 priority: 330 \\_SB_.LUS2: interrupts: 20 penalty: 330 references: 1 priority: 330 \\_SB_.LKLN: interrupts: 21 penalty: 330 references: 1 priority: 330 \\_SB_.LKSM: interrupts: 22 penalty: 110 references: 1 priority: 110 ---- after fixup boot-disabled links -------------- \\_SB_.LNKD: interrupts: 17 penalty: 1210 references: 6 priority: 7260 \\_SB_.LNKA: interrupts: 17 penalty: 1210 references: 5 priority: 6050 \\_SB_.LNKC: interrupts: 19 penalty: 660 references: 6 priority: 3960 \\_SB_.LNKB: interrupts: 18 penalty: 550 references: 5 priority: 2750 \\_SB_.LNKE: interrupts: 16 penalty: 440 references: 4 priority: 1760 \\_SB_.LUS0: interrupts: 20 penalty: 330 references: 1 priority: 330 \\_SB_.LAUI: interrupts: 21 penalty: 330 references: 1 priority: 330 \\_SB_.LKMO: interrupts: 21 penalty: 330 references: 1 priority: 330 \\_SB_.LUS1: interrupts: 20 penalty: 330 references: 1 priority: 330 \\_SB_.LUS2: interrupts: 20 penalty: 330 references: 1 priority: 330 \\_SB_.LKLN: interrupts: 21 penalty: 330 references: 1 priority: 330 \\_SB_.LKSM: interrupts: 22 penalty: 110 references: 1 priority: 110 ---- arbitrated configuration --------------------- \\_SB_.LNKA irq 0: [ 17] high,level,sharable 1.3.0 \\_SB_.LNKB irq 0: [ 18] high,level,sharable 1.3.1 \\_SB_.LNKC irq 0: [ 19] high,level,sharable 1.3.2 \\_SB_.LNKD irq 0: [ 17] high,level,sharable 1.3.3 \\_SB_.LNKB irq 0: [ 18] high,level,sharable 1.4.0 \\_SB_.LNKC irq 0: [ 19] high,level,sharable 1.4.1 \\_SB_.LNKD irq 0: [ 17] high,level,sharable 1.4.2 \\_SB_.LNKA irq 0: [ 17] high,level,sharable 1.4.3 \\_SB_.LNKC irq 0: [ 19] high,level,sharable 1.5.0 \\_SB_.LNKD irq 0: [ 17] high,level,sharable 1.5.1 \\_SB_.LNKA irq 0: [ 17] high,level,sharable 1.5.2 \\_SB_.LNKB irq 0: [ 18] high,level,sharable 1.5.3 \\_SB_.LNKD irq 0: [ 17] high,level,sharable 1.6.0 \\_SB_.LNKA irq 0: [ 17] high,level,sharable 1.6.1 \\_SB_.LNKB irq 0: [ 18] high,level,sharable 1.6.2 \\_SB_.LNKC irq 0: [ 19] high,level,sharable 1.6.3 \\_SB_.LNKA irq 0: [ 17] high,level,sharable 1.7.0 \\_SB_.LNKB irq 0: [ 18] high,level,sharable 1.7.1 \\_SB_.LNKC irq 0: [ 19] high,level,sharable 1.7.2 \\_SB_.LNKD irq 0: [ 17] high,level,sharable 1.7.3 \\_SB_.LNKC irq 0: [ 19] high,level,sharable 1.8.0 \\_SB_.LNKD irq 0: [ 17] high,level,sharable 1.9.0 pci1: on pcib1 pci1: physical bus=1 map[10]: type 1, range 32, base ff4fc000, size 14, enabled map[14]: type 4, range 32, base 0000c800, size 8, enabled pcib1: matched entry for 1.5.INTA (source \\_SB_.LNKC) pcib1: slot 5 INTA is routed to irq 5 found-> vendor=0x1737, dev=0x1032, revid=0x12 bus=1, slot=5, func=0 class=02-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0117, statreg=0x02b0, cachelnsz=8 (dwords) lattimer=0x40 (1920 ns), mingnt=0x17 (5750 ns), maxlat=0x1f (7750 ns) intpin=a, irq=5 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type 1, range 32, base ff4fac00, size 7, enabled map[14]: type 4, range 32, base 0000cc00, size 7, enabled map[18]: type 1, range 32, base ff4d0000, size 16, enabled pcib1: matched entry for 1.6.INTA (source \\_SB_.LNKD) pcib1: slot 6 INTA is routed to irq 5 found-> vendor=0x11cb, dev=0x2000, revid=0x01 bus=1, slot=6, func=0 class=07-80-00, hdrtype=0x00, mfdev=0 cmdreg=0x0103, statreg=0x0280, cachelnsz=8 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=5 map[10]: type 4, range 32, base 0000cf00, size 6, enabled map[14]: type 4, range 32, base 0000cfa0, size 4, enabled map[18]: type 4, range 32, base 0000c480, size 7, enabled map[1c]: type 1, range 32, base ff4f8000, size 12, enabled map[20]: type 1, range 32, base ff4a0000, size 17, enabled pcib1: matched entry for 1.8.INTA (source \\_SB_.LNKC) pcib1: slot 8 INTA is routed to irq 5 found-> vendor=0x105a, dev=0x3373, revid=0x02 bus=1, slot=8, func=0 class=01-04-00, hdrtype=0x00, mfdev=0 cmdreg=0x0117, statreg=0x0230, cachelnsz=144 (dwords) lattimer=0x60 (2880 ns), mingnt=0x04 (1000 ns), maxlat=0x12 (4500 ns) intpin=a, irq=5 powerspec 2 supports D0 D1 D3 current D0 map[10]: type 1, range 32, base ff4fa000, size 11, enabled map[14]: type 1, range 32, base ff4f4000, size 14, enabled pcib1: matched entry for 1.9.INTA (source \\_SB_.LNKD) pcib1: slot 9 INTA is routed to irq 5 found-> vendor=0x104c, dev=0x8023, revid=0x00 bus=1, slot=9, func=0 class=0c-00-10, hdrtype=0x00, mfdev=0 cmdreg=0x0116, statreg=0x0210, cachelnsz=8 (dwords) lattimer=0x40 (1920 ns), mingnt=0x03 (750 ns), maxlat=0x04 (1000 ns) intpin=a, irq=5 powerspec 2 supports D0 D1 D2 D3 current D0 skc0: port 0xc800-0xc8ff mem 0xff4fc000-0xff4fffff irq 5 at device 5.0 on pci1 pcib1: device skc0 requested decoded memory range 0xff4fc000-0xff4fffff skc0: SK-9521 10/100/1000Base-T Adapter sk0: on skc0 sk0: Ethernet address: 00:0c:41:1a:3e:aa sk0: bpf attached miibus0: on sk0 e1000phy0: on miibus0 e1000phy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX-FDX, auto si0: port 0xcc00-0xcc7f mem 0xff4d0000-0xff4dffff,0xff4fac00-0xff4fac7f irq 5 at device 6.0 on pci1 pcib1: device si0 requested decoded memory range 0xff4d0000-0xff4dffff si0: card: SXPCI, ports: 8, modules: 1, type: 8 atapci1: port 0xc480-0xc4ff,0xcfa0-0xcfaf,0xcf00-0xcf3f mem 0xff4a0000-0xff4bffff,0xff4f8000-0xff4f8fff irq 5 at device 8.0 on pci1 pcib1: device atapci1 requested decoded memory range 0xff4f8000-0xff4f8fff atapci1: [MPSAFE] ata2: reset tp1 mask=01 ostat0=50 ostat1=00 ata2-master: stat=0x50 err=0x01 lsb=0x00 msb=0x00 ata2: reset tp2 mask=01 stat0=50 stat1=00 devices=0x1 ata2: at 0xff4f8000 on atapci1 ata2: [MPSAFE] ata3: reset tp1 mask=01 ostat0=50 ostat1=00 ata3-master: stat=0x50 err=0x01 lsb=0x00 msb=0x00 ata3: reset tp2 mask=01 stat0=50 stat1=00 devices=0x1 ata3: at 0xff4f8000 on atapci1 ata3: [MPSAFE] ata4: reset tp1 mask=01 ostat0=20 ostat1=30 ata4-master: stat=0x20 err=0x20 lsb=0x20 msb=0x20 ata4: reset tp2 mask=01 stat0=20 stat1=00 devices=0x0 ata4: at 0xff4f8000 on atapci1 ata4: [MPSAFE] pci1: at device 9.0 (no driver attached) pcib2: at device 11.0 on pci0 pcib2: secondary bus 2 pcib2: subordinate bus 2 pcib2: I/O decode 0xd000-0xdfff pcib2: memory decode 0xff500000-0xff5fffff pcib2: prefetched decode 0xdeb00000-0xeeafffff pcib2: could not get PCI interrupt routing table for \\_SB_.PCI0.P0P2 - AE_NOT_FOUND pci2: on pcib2 pci2: physical bus=2 map[10]: type 3, range 32, base e0000000, size 27, enabled map[14]: type 4, range 32, base 0000d000, size 8, enabled map[18]: type 1, range 32, base ff5f0000, size 16, enabled found-> vendor=0x1002, dev=0x5159, revid=0x00 bus=2, slot=0, func=0 class=03-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0187, statreg=0x02b0, cachelnsz=8 (dwords) lattimer=0x40 (1920 ns), mingnt=0x08 (2000 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 powerspec 2 supports D0 D1 D2 D3 current D0 pci2: at device 0.0 (no driver attached) mss_probe: no address given, try 0x530 mss_detect, busy still set (0xff) fdc0: port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on acpi0 fdc0: FIFO enabled, 8 bytes threshold fd0: <1440-KB 3.5" drive> on fdc0 drive 0 ppc0: using extended I/O port range ppc0: ECP SPP ECP+EPP SPP ppc0 port 0x778-0x77b,0x378-0x37f irq 7 drq 3 on acpi0 ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/16 bytes threshold ppbus0: on ppc0 lpt0: on ppbus0 lpt0: Interrupt-driven port atkbdc0: port 0x64,0x60 irq 1 on acpi0 atkbd0: irq 1 on atkbdc0 atkbd: the current kbd controller command byte 0065 atkbd: keyboard ID 0x41ab (2) kbd0 at atkbd0 kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000 psm0: unable to allocate IRQ psmcpnp0 irq 12 on acpi0 psm0: current command byte:0065 psm0: irq 12 on atkbdc0 psm0: model IntelliMouse Explorer, device ID 4-00, 5 buttons psm0: config:00000000, flags:00000000, packet size:4 psm0: syncmask:08, syncbits:08 sio0: irq maps: 0xc1 0xd1 0xc1 0xc1 sio0 port 0x3f8-0x3ff irq 4 on acpi0 sio0: type 16550A sio1: irq maps: 0xc1 0xc9 0xc1 0xc1 sio1 port 0x2f8-0x2ff irq 3 on acpi0 sio1: type 16550A mss_probe: no address given, try 0x530 mss_probe: no address given, try 0x530 mss_probe: no address given, try 0x530 mss_probe: no address given, try 0x530 mss_probe: no address given, try 0x530 mss_probe: no address given, try 0x530 mss_probe: no address given, try 0x530 mss_probe: no address given, try 0x530 mss_probe: no address given, try 0x530 mss_probe: no address given, try 0x530 mss_probe: no address given, try 0x530 mss_probe: no address given, try 0x530 mss_probe: no address given, try 0x530 mss_probe: no address given, try 0x530 mss_probe: no address given, try 0x530 mss_probe: no address given, try 0x530 acpi_button0: on acpi0 uteval-0226: *** Error: Return object type is incorrect [\\_SB_.LATA._CRS] (Node 0xffffff00009abc30), AE_TYPE can't fetch resources for \\_SB_.LATA - AE_TYPE acpi_timer0: <24-bit timer at 3.579545MHz> port 0x4008-0x400b on acpi0 mss_probe: no address given, try 0x530 mss_probe: no address given, try 0x530 mss_probe: no address given, try 0x530 mss_probe: no address given, try 0x530 mss_probe: no address given, try 0x530 mss_probe: no address given, try 0x530 mss_probe: no address given, try 0x530 mss_probe: no address given, try 0x530 mss_probe: no address given, try 0x530 mss_probe: no address given, try 0x530 mss_probe: no address given, try 0x530 unknown: not probed (disabled) mss_probe: no address given, try 0x530 mss_probe: no address given, try 0x530 mss_probe: no address given, try 0x530 mss_probe: no address given, try 0x530 mss_probe: no address given, try 0x530 mss_probe: no address given, try 0x530 mss_probe: no address given, try 0x530 mss_probe: no address given, try 0x530 mss_probe: no address given, try 0x530 mss_probe: no address given, try 0x530 mss_probe: no address given, try 0x530 mss_probe: no address given, try 0x530 mss_probe: no address given, try 0x530 mss_probe: no address given, try 0x530 mss_probe: no address given, try 0x530 mss_probe: no address given, try 0x530 mss_probe: no address given, try 0x530 unknown: not probed (disabled) mss_probe: no address given, try 0x530 mss_probe: no address given, try 0x530 mss_probe: no address given, try 0x530 mss_probe: no address given, try 0x530 mss_probe: no address given, try 0x530 mss_probe: no address given, try 0x530 ata: ata0 already exists; skipping it ata: ata1 already exists; skipping it atkbdc: atkbdc0 already exists; skipping it fdc: fdc0 already exists; skipping it ppc: ppc0 already exists; skipping it sio: sio0 already exists; skipping it sio: sio1 already exists; skipping it Trying Read_Port at 203 Trying Read_Port at 243 Trying Read_Port at 283 Trying Read_Port at 2c3 Trying Read_Port at 303 Trying Read_Port at 343 Trying Read_Port at 383 Trying Read_Port at 3c3 sc: sc0 already exists; skipping it vga: vga0 already exists; skipping it isa_probe_children: disabling PnP devices isa_probe_children: probing non-PnP devices orm0: