Building yapet-1.0.txz (origin /buildshare/ports/355755/security/yapet) for powerpc-10-0 on XXX slot1: created x distfiles/ x distfiles/yapet-1.0.tar.gz x packages/ x packages/gmake-3.82_1.txz x packages/pkg-1.2.7_2.txz x packages/gettext-0.18.3.1_1.txz ELF ldconfig path: /lib /usr/lib /usr/lib/compat Make depends ===> yapet-1.0 depends on file: /usr/local/sbin/pkg - not found ===> Verifying install for /usr/local/sbin/pkg in /buildshare/ports/355755/ports-mgmt/pkg ===> Installing existing package /packages/pkg-1.2.7_2.txz Installing pkg-1.2.7_2... done If you are upgrading from the old package format, first run: # pkg2ng ===> Returning to build of yapet-1.0 ===> yapet-1.0 depends on shared library: libintl.so - not found ===> Verifying for libintl.so in /buildshare/ports/355755/devel/gettext ===> Installing existing package /packages/gettext-0.18.3.1_1.txz Installing gettext-0.18.3.1_1... done ===> Returning to build of yapet-1.0 ===> yapet-1.0 depends on executable: gmake - not found ===> Verifying install for gmake in /buildshare/ports/355755/devel/gmake ===> Installing existing package /packages/gmake-3.82_1.txz Installing gmake-3.82_1... done ===> Returning to build of yapet-1.0 Make install ===> License GPLv3 accepted by the user ===> yapet-1.0 depends on file: /usr/local/sbin/pkg - found ===> Fetching all distfiles required by yapet-1.0 for building ===> Extracting for yapet-1.0 => SHA256 Checksum OK for yapet-1.0.tar.gz. ===> Patching for yapet-1.0 ===> yapet-1.0 depends on executable: gmake - found ===> yapet-1.0 depends on shared library: libintl.so - found (/usr/local/lib/libintl.so.9) ===> Configuring for yapet-1.0 ===> FreeBSD 10 autotools fix applied to /obj/buildshare/ports/355755/security/yapet/work/yapet-1.0/libyacurs/m4/libtool.m4 ===> FreeBSD 10 autotools fix applied to /obj/buildshare/ports/355755/security/yapet/work/yapet-1.0/libyacurs/aclocal.m4 ===> FreeBSD 10 autotools fix applied to /obj/buildshare/ports/355755/security/yapet/work/yapet-1.0/libyacurs/configure ===> FreeBSD 10 autotools fix applied to /obj/buildshare/ports/355755/security/yapet/work/yapet-1.0/libyacurs/build-aux/config.rpath ===> FreeBSD 10 autotools fix applied to /obj/buildshare/ports/355755/security/yapet/work/yapet-1.0/m4/libtool.m4 ===> FreeBSD 10 autotools fix applied to /obj/buildshare/ports/355755/security/yapet/work/yapet-1.0/aclocal.m4 ===> FreeBSD 10 autotools fix applied to /obj/buildshare/ports/355755/security/yapet/work/yapet-1.0/configure ===> FreeBSD 10 autotools fix applied to /obj/buildshare/ports/355755/security/yapet/work/yapet-1.0/build-aux/config.rpath configure: loading site script /buildshare/ports/355755/Templates/config.site checking for a BSD-compatible install... /usr/bin/install -c -o root -g wheel checking whether build environment is sane... yes checking for a thread-safe mkdir -p... (cached) /bin/mkdir -p checking for gawk... (cached) /usr/bin/awk checking whether gmake sets $(MAKE)... yes checking whether gmake supports nested variables... yes checking whether gmake supports nested variables... (cached) yes configure: Checking required programs checking for gcc... cc checking whether the C compiler works... yes checking for C compiler default output file name... a.out checking for suffix of executables... checking whether we are cross compiling... no checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether cc accepts -g... yes checking for cc option to accept ISO C89... none needed checking whether cc understands -c and -o together... yes checking for style of include used by gmake... GNU checking dependency style of cc... gcc3 checking whether we are using the GNU C++ compiler... yes checking whether c++ accepts -g... yes checking dependency style of c++... gcc3 checking for a sed that does not truncate output... (cached) /usr/bin/sed checking for ar... ar checking the archiver (ar) interface... ar checking build system type... powerpc-portbld-freebsd11.0 checking host system type... powerpc-portbld-freebsd11.0 checking how to print strings... printf checking for a sed that does not truncate output... (cached) /usr/bin/sed checking for grep that handles long lines and -e... (cached) /usr/bin/grep checking for egrep... (cached) /usr/bin/egrep checking for fgrep... (cached) /usr/bin/fgrep checking for ld used by cc... /usr/bin/ld checking if the linker (/usr/bin/ld) is GNU ld... yes checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B checking the name lister (/usr/bin/nm -B) interface... BSD nm checking whether ln -s works... yes checking the maximum length of command line arguments... (cached) 262144 checking whether the shell understands some XSI constructs... yes checking whether the shell understands "+="... no checking how to convert powerpc-portbld-freebsd11.0 file names to powerpc-portbld-freebsd11.0 format... func_convert_file_noop checking how to convert powerpc-portbld-freebsd11.0 file names to toolchain format... func_convert_file_noop checking for /usr/bin/ld option to reload object files... -r checking for objdump... objdump checking how to recognize dependent libraries... pass_all checking for dlltool... no checking how to associate runtime and link libraries... printf %s\n checking for archiver @FILE support... no checking for strip... strip checking for ranlib... ranlib checking command to parse /usr/bin/nm -B output from cc object... ok checking for sysroot... no checking for mt... mt checking if mt is a manifest tool... no checking how to run the C preprocessor... cpp checking for ANSI C header files... (cached) yes checking for sys/types.h... (cached) yes checking for sys/stat.h... (cached) yes checking for stdlib.h... (cached) yes checking for string.h... (cached) yes checking for memory.h... (cached) yes checking for strings.h... (cached) yes checking for inttypes.h... (cached) yes checking for stdint.h... (cached) yes checking for unistd.h... (cached) yes checking for dlfcn.h... (cached) yes checking for objdir... .libs checking if cc supports -fno-rtti -fno-exceptions... no checking for cc option to produce PIC... -fPIC -DPIC checking if cc PIC flag -fPIC -DPIC works... yes checking if cc static flag -static works... yes checking if cc supports -c -o file.o... yes checking if cc supports -c -o file.o... (cached) yes checking whether the cc linker (/usr/bin/ld) supports shared libraries... yes checking whether -lc should be explicitly linked in... no checking dynamic linker characteristics... freebsd11.0 ld.so checking how to hardcode library paths into programs... immediate checking whether stripping libraries is possible... yes checking if libtool supports shared libraries... yes checking whether to build shared libraries... yes checking whether to build static libraries... yes checking how to run the C++ preprocessor... c++ -E checking for ld used by c++... /usr/bin/ld checking if the linker (/usr/bin/ld) is GNU ld... yes checking whether the c++ linker (/usr/bin/ld) supports shared libraries... yes checking for c++ option to produce PIC... -fPIC -DPIC checking if c++ PIC flag -fPIC -DPIC works... yes checking if c++ static flag -static works... yes checking if c++ supports -c -o file.o... yes checking if c++ supports -c -o file.o... (cached) yes checking whether the c++ linker (/usr/bin/ld) supports shared libraries... yes checking dynamic linker characteristics... freebsd11.0 ld.so checking how to hardcode library paths into programs... immediate checking for pkg-config... no checking for openssl/ssl.h in /usr/local/ssl... no checking for openssl/ssl.h in /usr/lib/ssl... no checking for openssl/ssl.h in /usr/ssl... no checking for openssl/ssl.h in /usr/pkg... no checking for openssl/ssl.h in /usr/local... no checking for openssl/ssl.h in /usr... yes checking whether compiling and linking against OpenSSL works... yes configure: Checking C headers checking whether time.h and sys/time.h may both be included... yes checking for fcntl.h... (cached) yes checking for getopt.h... (cached) yes checking for inttypes.h... (cached) yes checking for libgen.h... (cached) yes checking libintl.h usability... yes checking libintl.h presence... yes checking for libintl.h... yes checking locale.h usability... yes checking locale.h presence... yes checking for locale.h... yes checking for stdint.h... (cached) yes checking for strings.h... (cached) yes checking for sys/time.h... (cached) yes checking termios.h usability... yes checking termios.h presence... yes checking for termios.h... yes configure: Checking C++ headers checking for ISO C++ 98 include files... yes configure: Checking types checking for int32_t... (cached) yes checking for int64_t... (cached) yes checking for mode_t... (cached) yes checking for off_t... (cached) yes checking for size_t... (cached) yes checking for ssize_t... (cached) yes checking for uid_t in sys/types.h... (cached) yes checking for uint8_t... (cached) yes checking for uint16_t... (cached) yes checking for uint32_t... (cached) yes checking for uint64_t... (cached) yes configure: Checking functions checking for working alloca.h... no checking for alloca... yes checking for basename... yes checking for isblank... (cached) yes checking for isspace... yes checking for lrand48... yes checking for rand... (cached) yes checking for setlocale... (cached) yes checking for srand... (cached) yes checking for srand48... yes checking for strcasestr... yes checking for tcgetattr... yes checking for tcsetattr... yes checking for tolower... yes checking for towlower... (cached) yes checking for dup2... (cached) yes checking for getopt... (cached) yes checking for memset... (cached) yes checking for strchr... yes checking for strdup... (cached) yes checking for strerror... (cached) yes checking for strstr... yes configure: Checking encryption functions checking for EVP_bf_cbc... yes checking for EVP_CIPHER_CTX_cleanup... yes checking for EVP_CIPHER_CTX_init... yes checking for EVP_CIPHER_CTX_set_key_length... yes checking for EVP_CipherInit_ex... yes checking for EVP_DigestFinal_ex... yes checking for EVP_DigestInit_ex... yes checking for EVP_DigestUpdate... yes checking for EVP_MD_CTX_cleanup... yes checking for EVP_MD_CTX_init... yes checking for EVP_md5... yes checking for EVP_ripemd160... yes checking for EVP_sha1... yes configure: Checking support functions checking for SSLeay_version... yes configure: Checking miscellaneous properties of platform checking size of int *... 4 checking size of int... 4 checking size of long... 4 checking whether byte ordering is bigendian... yes checking for /dev/urandom... yes checking for /dev/random... yes configure: Preparing NLS checking whether NLS is requested... yes checking for msgfmt... /usr/local/bin/msgfmt checking for gmsgfmt... /usr/local/bin/msgfmt checking for xgettext... /usr/local/bin/xgettext checking for msgmerge... /usr/local/bin/msgmerge checking for ld used by GCC... /usr/bin/ld checking if the linker (/usr/bin/ld) is GNU ld... yes checking for shared library run path origin... done checking for CFPreferencesCopyAppValue... no checking for CFLocaleCopyCurrent... no checking for GNU gettext in libc... no checking for iconv... yes checking for working iconv... no checking for GNU gettext in libintl... yes checking whether to use NLS... yes checking where the gettext function comes from... external libintl checking how to link with libintl... /usr/local/lib/libintl.so -Wl,-rpath -Wl,/usr/local/lib checking that generated files are newer than configure... done configure: creating ./config.status config.status: creating Makefile config.status: creating po/Makefile.in config.status: creating crypt/Makefile config.status: creating pwgen/Makefile config.status: creating ui/Makefile config.status: creating glue/Makefile config.status: creating yapet/Makefile config.status: creating csv2yapet/Makefile config.status: creating yapet2csv/Makefile config.status: creating tests/Makefile config.status: creating tests/preload/Makefile config.status: creating tests/testpaths.h config.status: creating doc/Makefile config.status: creating doc/Makefile.doc config.status: creating config.h config.status: executing depfiles commands config.status: executing libtool commands config.status: executing po-directories commands config.status: creating po/POTFILES config.status: creating po/Makefile === configuring in libyacurs (/obj/buildshare/ports/355755/security/yapet/work/yapet-1.0/libyacurs) configure: running /bin/sh ./configure --disable-option-checking '--prefix=/usr/local' '--enable-silent-rules' '--enable-converters' '--enable-nls' '--mandir=/usr/local/man' '--infodir=/usr/local/info/' '--build=powerpc-portbld-freebsd11.0' 'build_alias=powerpc-portbld-freebsd11.0' 'CC=cc' 'CFLAGS=-O2 -pipe -fno-strict-aliasing' 'LDFLAGS= -L/usr/local/lib -Wl,-rpath,/usr/lib:/usr/local/lib' 'CPPFLAGS=-I/usr/local/include' 'CXX=c++' 'CXXFLAGS=-O2 -pipe -fno-strict-aliasing' 'CPP=cpp' '--disable-install' --cache-file=/dev/null --srcdir=. configure: loading site script /buildshare/ports/355755/Templates/config.site checking for a BSD-compatible install... /usr/bin/install -c -o root -g wheel checking whether build environment is sane... yes checking for a thread-safe mkdir -p... (cached) /bin/mkdir -p checking for gawk... (cached) /usr/bin/awk checking whether gmake sets $(MAKE)... yes checking whether gmake supports nested variables... yes checking whether gmake supports nested variables... (cached) yes checking for style of include used by gmake... GNU checking for gcc... cc checking whether the C compiler works... yes checking for C compiler default output file name... a.out checking for suffix of executables... checking whether we are cross compiling... no checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether cc accepts -g... yes checking for cc option to accept ISO C89... none needed checking whether cc understands -c and -o together... yes checking dependency style of cc... gcc3 checking how to run the C preprocessor... cpp checking for grep that handles long lines and -e... (cached) /usr/bin/grep checking for egrep... (cached) /usr/bin/egrep checking for ANSI C header files... (cached) yes checking for sys/types.h... (cached) yes checking for sys/stat.h... (cached) yes checking for stdlib.h... (cached) yes checking for string.h... (cached) yes checking for memory.h... (cached) yes checking for strings.h... (cached) yes checking for inttypes.h... (cached) yes checking for stdint.h... (cached) yes checking for unistd.h... (cached) yes checking for minix/config.h... (cached) no checking whether it is safe to define __EXTENSIONS__... yes checking for gcc... (cached) cc checking whether we are using the GNU C compiler... (cached) yes checking whether cc accepts -g... (cached) yes checking for cc option to accept ISO C89... (cached) none needed checking whether cc understands -c and -o together... (cached) yes checking dependency style of cc... (cached) gcc3 checking whether we are using the GNU C++ compiler... yes checking whether c++ accepts -g... yes checking dependency style of c++... gcc3 checking for ar... ar checking the archiver (ar) interface... ar checking build system type... powerpc-portbld-freebsd11.0 checking host system type... powerpc-portbld-freebsd11.0 checking how to print strings... printf checking for a sed that does not truncate output... (cached) /usr/bin/sed checking for fgrep... (cached) /usr/bin/fgrep checking for ld used by cc... /usr/bin/ld checking if the linker (/usr/bin/ld) is GNU ld... yes checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B checking the name lister (/usr/bin/nm -B) interface... BSD nm checking whether ln -s works... yes checking the maximum length of command line arguments... (cached) 262144 checking whether the shell understands some XSI constructs... yes checking whether the shell understands "+="... no checking how to convert powerpc-portbld-freebsd11.0 file names to powerpc-portbld-freebsd11.0 format... func_convert_file_noop checking how to convert powerpc-portbld-freebsd11.0 file names to toolchain format... func_convert_file_noop checking for /usr/bin/ld option to reload object files... -r checking for objdump... objdump checking how to recognize dependent libraries... pass_all checking for dlltool... no checking how to associate runtime and link libraries... printf %s\n checking for archiver @FILE support... no checking for strip... strip checking for ranlib... ranlib checking command to parse /usr/bin/nm -B output from cc object... ok checking for sysroot... no checking for mt... mt checking if mt is a manifest tool... no checking for dlfcn.h... (cached) yes checking for objdir... .libs checking if cc supports -fno-rtti -fno-exceptions... no checking for cc option to produce PIC... -fPIC -DPIC checking if cc PIC flag -fPIC -DPIC works... yes checking if cc static flag -static works... yes checking if cc supports -c -o file.o... yes checking if cc supports -c -o file.o... (cached) yes checking whether the cc linker (/usr/bin/ld) supports shared libraries... yes checking whether -lc should be explicitly linked in... no checking dynamic linker characteristics... freebsd11.0 ld.so checking how to hardcode library paths into programs... immediate checking whether stripping libraries is possible... yes checking if libtool supports shared libraries... yes checking whether to build shared libraries... yes checking whether to build static libraries... yes checking how to run the C++ preprocessor... c++ -E checking for ld used by c++... /usr/bin/ld checking if the linker (/usr/bin/ld) is GNU ld... yes checking whether the c++ linker (/usr/bin/ld) supports shared libraries... yes checking for c++ option to produce PIC... -fPIC -DPIC checking if c++ PIC flag -fPIC -DPIC works... yes checking if c++ static flag -static works... yes checking if c++ supports -c -o file.o... yes checking if c++ supports -c -o file.o... (cached) yes checking whether the c++ linker (/usr/bin/ld) supports shared libraries... yes checking dynamic linker characteristics... freebsd11.0 ld.so checking how to hardcode library paths into programs... immediate checking checking whether we are on Cygwin... no checking whether the linker accepts -Wl,--export-dynamic... yes checking whether NLS is requested... yes checking for msgfmt... /usr/local/bin/msgfmt checking for gmsgfmt... /usr/local/bin/msgfmt checking for xgettext... /usr/local/bin/xgettext checking for msgmerge... /usr/local/bin/msgmerge checking for ld used by GCC... /usr/bin/ld checking if the linker (/usr/bin/ld) is GNU ld... yes checking for shared library run path origin... done checking for CFPreferencesCopyAppValue... no checking for CFLocaleCopyCurrent... no checking for GNU gettext in libc... no checking for iconv... yes checking for working iconv... no checking for GNU gettext in libintl... yes checking whether to use NLS... yes checking where the gettext function comes from... external libintl checking how to link with libintl... /usr/local/lib/libintl.so -Wl,-rpath -Wl,/usr/local/lib checking whether time.h and sys/time.h may both be included... yes checking for fcntl.h... (cached) yes checking locale.h usability... yes checking locale.h presence... yes checking for locale.h... yes checking libintl.h usability... yes checking libintl.h presence... yes checking for libintl.h... yes checking stropts.h usability... no checking stropts.h presence... no checking for stropts.h... no checking sys/termios.h usability... yes checking sys/termios.h presence... yes checking for sys/termios.h... yes checking termios.h usability... yes checking termios.h presence... yes checking for termios.h... yes checking for sys/types.h... (cached) yes checking for sys/ioctl.h... (cached) yes checking for sys/time.h... (cached) yes checking for stdint.h... (cached) yes checking for signal.h... (cached) yes checking for unistd.h... (cached) yes checking cwchar usability... yes checking cwchar presence... yes checking for cwchar... yes checking cwctype usability... yes checking cwctype presence... yes checking for cwctype... yes checking for int16_t... (cached) yes checking for size_t... (cached) yes checking for uint16_t... (cached) yes checking for uint32_t... (cached) yes checking for ISO C++ 98 include files... yes checking for NcursesW wide-character library... yes checking for working ncursesw/curses.h... no checking for working ncursesw.h... no checking for working ncurses.h... yes checking for alarm... (cached) yes checking for getcwd... (cached) yes checking for memset... (cached) yes checking for strdup... (cached) yes checking for strerror... (cached) yes checking for strstr... yes checking for setlocale... (cached) yes checking for iswprint... yes checking for resize_term... yes checking for termname... yes checking whether waddstr() use const char*... yes checking whether waddnstr() use const char*... yes checking whether mvwaddstr() use const char*... yes checking whether mvwaddnstr() use const char*... yes checking whether keypad() return int... yes checking that generated files are newer than configure... done configure: creating ./config.status config.status: creating Makefile config.status: creating src/Makefile config.status: creating tests/Makefile config.status: creating include/Makefile config.status: creating po/Makefile.in config.status: creating tests/basic/Makefile config.status: creating tests/ui-interactive/Makefile config.status: creating tests/ui-non-interactive/Makefile config.status: creating tests/preloadlib/Makefile config.status: creating config.h config.status: creating include/libyacurscfg.h config.status: executing depfiles commands config.status: executing libtool commands config.status: executing po-directories commands config.status: creating po/POTFILES config.status: creating po/Makefile configure: configure: host powerpc-portbld-freebsd11.0 configure: prefix /usr/local configure: Use NLS yes configure: Curses library -lncursesw configure: Debug mode -DNDEBUG configure: Disable wchar no ****************************************************************** Prefix : /usr/local CPPFLAGS : -I/usr/local/include CFLAGS : -O2 -pipe -fno-strict-aliasing CXXFLAGS : -O2 -pipe -fno-strict-aliasing LDFLAGS : -L/usr/local/lib -Wl,-rpath,/usr/lib:/usr/local/lib Enable debug code : no Disable install Doc.: no Build csv2yapet : yes Use NLS : yes ****************************************************************** Looks good. ===> Building for yapet-1.0 gmake[1]: Entering directory `/obj/buildshare/ports/355755/security/yapet/work/yapet-1.0' gmake all-recursive gmake[2]: Entering directory `/obj/buildshare/ports/355755/security/yapet/work/yapet-1.0' Making all in libyacurs gmake[3]: Entering directory `/obj/buildshare/ports/355755/security/yapet/work/yapet-1.0/libyacurs' gmake all-recursive gmake[4]: Entering directory `/obj/buildshare/ports/355755/security/yapet/work/yapet-1.0/libyacurs' Making all in po gmake[5]: Entering directory `/obj/buildshare/ports/355755/security/yapet/work/yapet-1.0/libyacurs/po' gmake[5]: Leaving directory `/obj/buildshare/ports/355755/security/yapet/work/yapet-1.0/libyacurs/po' Making all in include gmake[5]: Entering directory `/obj/buildshare/ports/355755/security/yapet/work/yapet-1.0/libyacurs/include' gmake all-am gmake[6]: Entering directory `/obj/buildshare/ports/355755/security/yapet/work/yapet-1.0/libyacurs/include' gmake[6]: Nothing to be done for `all-am'. gmake[6]: Leaving directory `/obj/buildshare/ports/355755/security/yapet/work/yapet-1.0/libyacurs/include' gmake[5]: Leaving directory `/obj/buildshare/ports/355755/security/yapet/work/yapet-1.0/libyacurs/include' Making all in src gmake[5]: Entering directory `/obj/buildshare/ports/355755/security/yapet/work/yapet-1.0/libyacurs/src' CXX libyacurs_la-sigaction.lo CXX libyacurs_la-coordinates.lo CXX libyacurs_la-size.lo CXX libyacurs_la-margin.lo CXX libyacurs_la-area.lo CXX libyacurs_la-curstr.lo CXX libyacurs_la-curswin.lo CXX libyacurs_la-cursorbuf.lo CXX libyacurs_la-event.lo CXX libyacurs_la-eventconnector.lo CXX libyacurs_la-eventqueue.lo CXX libyacurs_la-evtqueuestats.lo CXX libyacurs_la-curs.lo CXX libyacurs_la-realizeable.lo CXX libyacurs_la-titlebar.lo CXX libyacurs_la-statusbar.lo CXX libyacurs_la-windowbase.lo CXX libyacurs_la-hotkey.lo CXX libyacurs_la-window.lo CXX libyacurs_la-lockscreen.lo CXX libyacurs_la-lineobject.lo CXX libyacurs_la-widgetbase.lo CXX libyacurs_la-pack.lo CXX libyacurs_la-vpack.lo CXX libyacurs_la-hpack.lo CXX libyacurs_la-widget.lo CXX libyacurs_la-label.lo CXX libyacurs_la-dynlabel.lo CXX libyacurs_la-yacursex.lo CXX libyacurs_la-colors.lo CXX libyacurs_la-colorparser.lo CXX libyacurs_la-focusgroup.lo CXX libyacurs_la-focusmanager.lo CXX libyacurs_la-button.lo CXX libyacurs_la-dialog.lo CXX libyacurs_la-messagebox.lo CXX libyacurs_la-messagebox2.lo CXX libyacurs_la-messagebox3.lo CXX libyacurs_la-inputbox.lo CXX libyacurs_la-filedialog.lo CXX libyacurs_la-filesavedialog.lo CXX libyacurs_la-fileloaddialog.lo CXX libyacurs_la-checkbox.lo CXX libyacurs_la-radiobox.lo CXX libyacurs_la-unlockdialog.lo CXX libyacurs_la-unlockdiadefault.lo CXX libyacurs_la-rule.lo CXX libyacurs_la-hrule.lo CXX libyacurs_la-vrule.lo CXX libyacurs_la-spacer.lo CXX libyacurs_la-yacursdbg.lo CXXLD libyacurs.la libtool: link: warning: `-version-info/-version-number' is ignored for convenience libraries gmake[5]: Leaving directory `/obj/buildshare/ports/355755/security/yapet/work/yapet-1.0/libyacurs/src' Making all in tests gmake[5]: Entering directory `/obj/buildshare/ports/355755/security/yapet/work/yapet-1.0/libyacurs/tests' Making all in preloadlib gmake[6]: Entering directory `/obj/buildshare/ports/355755/security/yapet/work/yapet-1.0/libyacurs/tests/preloadlib' /bin/sh ../../libtool --tag=CXX --mode=compile c++ -shared -D_XOPEN_SOURCE_EXTENDED=1 -DLOCALEDIR=\"/usr/local/share/locale\" -I../../include -DNDEBUG -I../.. -O2 -pipe -fno-strict-aliasing -I/usr/local/include -DHAVE_CONFIG_H -c -o ./testpreload.lo testpreload.cc libtool: compile: c++ -D_XOPEN_SOURCE_EXTENDED=1 -DLOCALEDIR=\"/usr/local/share/locale\" -I../../include -DNDEBUG -I../.. -O2 -pipe -fno-strict-aliasing -I/usr/local/include -DHAVE_CONFIG_H -c testpreload.cc -fPIC -DPIC -o ./.libs/testpreload.o /bin/sh ../../libtool --tag=CXX --mode=link c++ -O2 -pipe -fno-strict-aliasing -L/usr/local/lib -Wl,-rpath,/usr/lib:/usr/local/lib -rpath /usr/local/lib -version-info 0 -o libtestpreload.la testpreload.lo libtool: link: c++ -fPIC -DPIC -shared -nostdlib /usr/lib/crti.o /usr/lib/crtbeginS.o .libs/testpreload.o -L/usr/local/lib -L/usr/lib -lstdc++ -lm -lc -lgcc_s /usr/lib/crtsavres.o /usr/lib/crtendS.o /usr/lib/crtn.o -O2 -Wl,-rpath -Wl,/usr/lib:/usr/local/lib -Wl,-soname -Wl,libtestpreload.so.0 -o .libs/libtestpreload.so.0 libtool: link: (cd ".libs" && rm -f "libtestpreload.so" && ln -s "libtestpreload.so.0" "libtestpreload.so") libtool: link: (cd ".libs" && rm -f "libtestpreload.so" && ln -s "libtestpreload.so.0" "libtestpreload.so") libtool: link: ar cru .libs/libtestpreload.a .libs/testpreload.o libtool: link: ranlib .libs/libtestpreload.a libtool: link: ( cd ".libs" && rm -f "libtestpreload.la" && ln -s "../libtestpreload.la" "libtestpreload.la" ) gmake[6]: Leaving directory `/obj/buildshare/ports/355755/security/yapet/work/yapet-1.0/libyacurs/tests/preloadlib' Making all in basic gmake[6]: Entering directory `/obj/buildshare/ports/355755/security/yapet/work/yapet-1.0/libyacurs/tests/basic' gmake[6]: Nothing to be done for `all'. gmake[6]: Leaving directory `/obj/buildshare/ports/355755/security/yapet/work/yapet-1.0/libyacurs/tests/basic' Making all in ui-interactive gmake[6]: Entering directory `/obj/buildshare/ports/355755/security/yapet/work/yapet-1.0/libyacurs/tests/ui-interactive' gmake[6]: Nothing to be done for `all'. gmake[6]: Leaving directory `/obj/buildshare/ports/355755/security/yapet/work/yapet-1.0/libyacurs/tests/ui-interactive' Making all in ui-non-interactive gmake[6]: Entering directory `/obj/buildshare/ports/355755/security/yapet/work/yapet-1.0/libyacurs/tests/ui-non-interactive' gmake[6]: Nothing to be done for `all'. gmake[6]: Leaving directory `/obj/buildshare/ports/355755/security/yapet/work/yapet-1.0/libyacurs/tests/ui-non-interactive' gmake[6]: Entering directory `/obj/buildshare/ports/355755/security/yapet/work/yapet-1.0/libyacurs/tests' gmake[6]: Nothing to be done for `all-am'. gmake[6]: Leaving directory `/obj/buildshare/ports/355755/security/yapet/work/yapet-1.0/libyacurs/tests' gmake[5]: Leaving directory `/obj/buildshare/ports/355755/security/yapet/work/yapet-1.0/libyacurs/tests' gmake[5]: Entering directory `/obj/buildshare/ports/355755/security/yapet/work/yapet-1.0/libyacurs' gmake[5]: Nothing to be done for `all-am'. gmake[5]: Leaving directory `/obj/buildshare/ports/355755/security/yapet/work/yapet-1.0/libyacurs' gmake[4]: Leaving directory `/obj/buildshare/ports/355755/security/yapet/work/yapet-1.0/libyacurs' gmake[3]: Leaving directory `/obj/buildshare/ports/355755/security/yapet/work/yapet-1.0/libyacurs' Making all in po gmake[3]: Entering directory `/obj/buildshare/ports/355755/security/yapet/work/yapet-1.0/po' gmake[3]: Leaving directory `/obj/buildshare/ports/355755/security/yapet/work/yapet-1.0/po' Making all in crypt gmake[3]: Entering directory `/obj/buildshare/ports/355755/security/yapet/work/yapet-1.0/crypt' CXX libyapet_crypt_la-key.lo CXX libyapet_crypt_la-file.lo CXX libyapet_crypt_la-crypt.lo CXX libyapet_crypt_la-bdbuffer.lo CXX libyapet_crypt_la-partdec.lo CXXLD libyapet-crypt.la gmake[3]: Leaving directory `/obj/buildshare/ports/355755/security/yapet/work/yapet-1.0/crypt' Making all in ui gmake[3]: Entering directory `/obj/buildshare/ports/355755/security/yapet/work/yapet-1.0/ui' gmake[3]: Nothing to be done for `all'. gmake[3]: Leaving directory `/obj/buildshare/ports/355755/security/yapet/work/yapet-1.0/ui' Making all in glue gmake[3]: Entering directory `/obj/buildshare/ports/355755/security/yapet/work/yapet-1.0/glue' gmake[3]: Nothing to be done for `all'. gmake[3]: Leaving directory `/obj/buildshare/ports/355755/security/yapet/work/yapet-1.0/glue' Making all in pwgen gmake[3]: Entering directory `/obj/buildshare/ports/355755/security/yapet/work/yapet-1.0/pwgen' gmake[3]: Nothing to be done for `all'. gmake[3]: Leaving directory `/obj/buildshare/ports/355755/security/yapet/work/yapet-1.0/pwgen' Making all in csv2yapet gmake[3]: Entering directory `/obj/buildshare/ports/355755/security/yapet/work/yapet-1.0/csv2yapet' CXX csv2yapet-main.o CXX csv2yapet-csvimport.o CXX csv2yapet-consts.o CXXLD csv2yapet gmake[3]: Leaving directory `/obj/buildshare/ports/355755/security/yapet/work/yapet-1.0/csv2yapet' Making all in yapet2csv gmake[3]: Entering directory `/obj/buildshare/ports/355755/security/yapet/work/yapet-1.0/yapet2csv' CXX yapet2csv-main.o CXX yapet2csv-csvexport.o CXX yapet2csv-consts.o CXXLD yapet2csv gmake[3]: Leaving directory `/obj/buildshare/ports/355755/security/yapet/work/yapet-1.0/yapet2csv' Making all in yapet gmake[3]: Entering directory `/obj/buildshare/ports/355755/security/yapet/work/yapet-1.0/yapet' CXX yapet-charpool.o CXX yapet-rng.o CXX yapet-pwgen.o CXX yapet-loadfile.o CXX yapet-promptpassword.o CXX yapet-createfile.o CXX yapet-changepassword.o CXX yapet-opencmdlinefile.o CXX yapet-help.o CXX yapet-mainwindow.o CXX yapet-passworddialog.o CXX yapet-passwordrecord.o CXX yapet-newpassworddialog.o CXX yapet-info.o CXX yapet-yapetunlockdialog.o CXX yapet-yapetlockscreen.o CXX yapet-pwgendialog.o CXX yapet-main.o CXX yapet-cfgfile.o CXX yapet-consts.o CXX yapet-cfg.o CXX yapet-globals.o CXXLD yapet gmake[3]: Leaving directory `/obj/buildshare/ports/355755/security/yapet/work/yapet-1.0/yapet' Making all in tests gmake[3]: Entering directory `/obj/buildshare/ports/355755/security/yapet/work/yapet-1.0/tests' Making all in preload gmake[4]: Entering directory `/obj/buildshare/ports/355755/security/yapet/work/yapet-1.0/tests/preload' CXX checktestpwrecord-checktestpwrecord.o CXX checktestpwrecord-bdbuffer.o CXX checktestpwrecord-crypt.o CXX checktestpwrecord-file.o CXX checktestpwrecord-key.o CXX checktestpwrecord-partdec.o CXXLD checktestpwrecord CXX checkmasterpwchange-checkmasterpwchange.o CXX checkmasterpwchange-bdbuffer.o CXX checkmasterpwchange-crypt.o CXX checkmasterpwchange-file.o CXX checkmasterpwchange-key.o CXX checkmasterpwchange-partdec.o CXXLD checkmasterpwchange CXX istty.o CXXLD istty gmake[4]: Leaving directory `/obj/buildshare/ports/355755/security/yapet/work/yapet-1.0/tests/preload' gmake[4]: Entering directory `/obj/buildshare/ports/355755/security/yapet/work/yapet-1.0/tests' gmake[4]: Nothing to be done for `all-am'. gmake[4]: Leaving directory `/obj/buildshare/ports/355755/security/yapet/work/yapet-1.0/tests' gmake[3]: Leaving directory `/obj/buildshare/ports/355755/security/yapet/work/yapet-1.0/tests' Making all in doc gmake[3]: Entering directory `/obj/buildshare/ports/355755/security/yapet/work/yapet-1.0/doc' gmake[3]: Nothing to be done for `all'. gmake[3]: Leaving directory `/obj/buildshare/ports/355755/security/yapet/work/yapet-1.0/doc' gmake[3]: Entering directory `/obj/buildshare/ports/355755/security/yapet/work/yapet-1.0' rm -f yapet.desktop.tmp yapet.desktop /usr/bin/sed -e 's|@PACKAGE_STRING[@]|YAPET 1.0|g' -e 's|@PACKAGE_VERSION[@]|1.0|g' -e 's|@PACKAGE_NAME[@]|YAPET|g' -e 's|@PACKAGE_TARNAME[@]|yapet|g' -e 's|@PACKAGE[@]|yapet|g' -e 's|@top_srcdir[@]|.|g' -e 's|@top_builddir[@]|.|g' -e 's|@prefix[@]|/usr/local|g' ./yapet.desktop.in > yapet.desktop gmake[3]: Leaving directory `/obj/buildshare/ports/355755/security/yapet/work/yapet-1.0' gmake[2]: Leaving directory `/obj/buildshare/ports/355755/security/yapet/work/yapet-1.0' gmake[1]: Leaving directory `/obj/buildshare/ports/355755/security/yapet/work/yapet-1.0' ===> Staging for yapet-1.0 ===> Generating temporary packing list gmake[1]: Entering directory `/obj/buildshare/ports/355755/security/yapet/work/yapet-1.0' Making install in libyacurs gmake[2]: Entering directory `/obj/buildshare/ports/355755/security/yapet/work/yapet-1.0/libyacurs' Making install in po gmake[3]: Entering directory `/obj/buildshare/ports/355755/security/yapet/work/yapet-1.0/libyacurs/po' installing de.gmo as /obj/buildshare/ports/355755/security/yapet/work/stage/usr/local/share/locale/de/LC_MESSAGES/libyacurs.mo if test "libyacurs" = "gettext-tools"; then \ /bin/mkdir -p /obj/buildshare/ports/355755/security/yapet/work/stage/usr/local/share/gettext/po; \ for file in Makefile.in.in remove-potcdate.sin quot.sed boldquot.sed en@quot.header en@boldquot.header insert-header.sin Rules-quot Makevars.template; do \ install -o root -g wheel -m 444 ./$file \ /obj/buildshare/ports/355755/security/yapet/work/stage/usr/local/share/gettext/po/$file; \ done; \ for file in Makevars; do \ rm -f /obj/buildshare/ports/355755/security/yapet/work/stage/usr/local/share/gettext/po/$file; \ done; \ else \ : ; \ fi gmake[3]: Leaving directory `/obj/buildshare/ports/355755/security/yapet/work/yapet-1.0/libyacurs/po' Making install in include gmake[3]: Entering directory `/obj/buildshare/ports/355755/security/yapet/work/yapet-1.0/libyacurs/include' gmake[4]: Entering directory `/obj/buildshare/ports/355755/security/yapet/work/yapet-1.0/libyacurs/include' gmake[4]: Nothing to be done for `install-exec-am'. gmake[4]: Leaving directory `/obj/buildshare/ports/355755/security/yapet/work/yapet-1.0/libyacurs/include' gmake[3]: Leaving directory `/obj/buildshare/ports/355755/security/yapet/work/yapet-1.0/libyacurs/include' Making install in src gmake[3]: Entering directory `/obj/buildshare/ports/355755/security/yapet/work/yapet-1.0/libyacurs/src' gmake[4]: Entering directory `/obj/buildshare/ports/355755/security/yapet/work/yapet-1.0/libyacurs/src' gmake[4]: Nothing to be done for `install-data-am'. gmake[4]: Leaving directory `/obj/buildshare/ports/355755/security/yapet/work/yapet-1.0/libyacurs/src' gmake[3]: Leaving directory `/obj/buildshare/ports/355755/security/yapet/work/yapet-1.0/libyacurs/src' Making install in tests gmake[3]: Entering directory `/obj/buildshare/ports/355755/security/yapet/work/yapet-1.0/libyacurs/tests' Making install in preloadlib gmake[4]: Entering directory `/obj/buildshare/ports/355755/security/yapet/work/yapet-1.0/libyacurs/tests/preloadlib' gmake[5]: Entering directory `/obj/buildshare/ports/355755/security/yapet/work/yapet-1.0/libyacurs/tests/preloadlib' gmake[5]: Nothing to be done for `install-exec-am'. gmake[5]: Nothing to be done for `install-data-am'. gmake[5]: Leaving directory `/obj/buildshare/ports/355755/security/yapet/work/yapet-1.0/libyacurs/tests/preloadlib' gmake[4]: Leaving directory `/obj/buildshare/ports/355755/security/yapet/work/yapet-1.0/libyacurs/tests/preloadlib' Making install in basic gmake[4]: Entering directory `/obj/buildshare/ports/355755/security/yapet/work/yapet-1.0/libyacurs/tests/basic' gmake[5]: Entering directory `/obj/buildshare/ports/355755/security/yapet/work/yapet-1.0/libyacurs/tests/basic' gmake[5]: Nothing to be done for `install-exec-am'. gmake[5]: Nothing to be done for `install-data-am'. gmake[5]: Leaving directory `/obj/buildshare/ports/355755/security/yapet/work/yapet-1.0/libyacurs/tests/basic' gmake[4]: Leaving directory `/obj/buildshare/ports/355755/security/yapet/work/yapet-1.0/libyacurs/tests/basic' Making install in ui-interactive gmake[4]: Entering directory `/obj/buildshare/ports/355755/security/yapet/work/yapet-1.0/libyacurs/tests/ui-interactive' gmake[5]: Entering directory `/obj/buildshare/ports/355755/security/yapet/work/yapet-1.0/libyacurs/tests/ui-interactive' gmake[5]: Nothing to be done for `install-exec-am'. gmake[5]: Nothing to be done for `install-data-am'. gmake[5]: Leaving directory `/obj/buildshare/ports/355755/security/yapet/work/yapet-1.0/libyacurs/tests/ui-interactive' gmake[4]: Leaving directory `/obj/buildshare/ports/355755/security/yapet/work/yapet-1.0/libyacurs/tests/ui-interactive' Making install in ui-non-interactive gmake[4]: Entering directory `/obj/buildshare/ports/355755/security/yapet/work/yapet-1.0/libyacurs/tests/ui-non-interactive' gmake[5]: Entering directory `/obj/buildshare/ports/355755/security/yapet/work/yapet-1.0/libyacurs/tests/ui-non-interactive' gmake[5]: Nothing to be done for `install-exec-am'. gmake[5]: Nothing to be done for `install-data-am'. gmake[5]: Leaving directory `/obj/buildshare/ports/355755/security/yapet/work/yapet-1.0/libyacurs/tests/ui-non-interactive' gmake[4]: Leaving directory `/obj/buildshare/ports/355755/security/yapet/work/yapet-1.0/libyacurs/tests/ui-non-interactive' gmake[4]: Entering directory `/obj/buildshare/ports/355755/security/yapet/work/yapet-1.0/libyacurs/tests' gmake[5]: Entering directory `/obj/buildshare/ports/355755/security/yapet/work/yapet-1.0/libyacurs/tests' gmake[5]: Nothing to be done for `install-exec-am'. gmake[5]: Nothing to be done for `install-data-am'. gmake[5]: Leaving directory `/obj/buildshare/ports/355755/security/yapet/work/yapet-1.0/libyacurs/tests' gmake[4]: Leaving directory `/obj/buildshare/ports/355755/security/yapet/work/yapet-1.0/libyacurs/tests' gmake[3]: Leaving directory `/obj/buildshare/ports/355755/security/yapet/work/yapet-1.0/libyacurs/tests' gmake[3]: Entering directory `/obj/buildshare/ports/355755/security/yapet/work/yapet-1.0/libyacurs' gmake[4]: Entering directory `/obj/buildshare/ports/355755/security/yapet/work/yapet-1.0/libyacurs' gmake[4]: Nothing to be done for `install-exec-am'. gmake[4]: Nothing to be done for `install-data-am'. gmake[4]: Leaving directory `/obj/buildshare/ports/355755/security/yapet/work/yapet-1.0/libyacurs' gmake[3]: Leaving directory `/obj/buildshare/ports/355755/security/yapet/work/yapet-1.0/libyacurs' gmake[2]: Leaving directory `/obj/buildshare/ports/355755/security/yapet/work/yapet-1.0/libyacurs' Making install in po gmake[2]: Entering directory `/obj/buildshare/ports/355755/security/yapet/work/yapet-1.0/po' installing de.gmo as /obj/buildshare/ports/355755/security/yapet/work/stage/usr/local/share/locale/de/LC_MESSAGES/yapet.mo if test "yapet" = "gettext-tools"; then \ /bin/mkdir -p /obj/buildshare/ports/355755/security/yapet/work/stage/usr/local/share/gettext/po; \ for file in Makefile.in.in remove-potcdate.sin quot.sed boldquot.sed en@quot.header en@boldquot.header insert-header.sin Rules-quot Makevars.template; do \ install -o root -g wheel -m 444 ./$file \ /obj/buildshare/ports/355755/security/yapet/work/stage/usr/local/share/gettext/po/$file; \ done; \ for file in Makevars; do \ rm -f /obj/buildshare/ports/355755/security/yapet/work/stage/usr/local/share/gettext/po/$file; \ done; \ else \ : ; \ fi gmake[2]: Leaving directory `/obj/buildshare/ports/355755/security/yapet/work/yapet-1.0/po' Making install in crypt gmake[2]: Entering directory `/obj/buildshare/ports/355755/security/yapet/work/yapet-1.0/crypt' gmake[3]: Entering directory `/obj/buildshare/ports/355755/security/yapet/work/yapet-1.0/crypt' gmake[3]: Nothing to be done for `install-exec-am'. gmake[3]: Nothing to be done for `install-data-am'. gmake[3]: Leaving directory `/obj/buildshare/ports/355755/security/yapet/work/yapet-1.0/crypt' gmake[2]: Leaving directory `/obj/buildshare/ports/355755/security/yapet/work/yapet-1.0/crypt' Making install in ui gmake[2]: Entering directory `/obj/buildshare/ports/355755/security/yapet/work/yapet-1.0/ui' gmake[3]: Entering directory `/obj/buildshare/ports/355755/security/yapet/work/yapet-1.0/ui' gmake[3]: Nothing to be done for `install-exec-am'. gmake[3]: Nothing to be done for `install-data-am'. gmake[3]: Leaving directory `/obj/buildshare/ports/355755/security/yapet/work/yapet-1.0/ui' gmake[2]: Leaving directory `/obj/buildshare/ports/355755/security/yapet/work/yapet-1.0/ui' Making install in glue gmake[2]: Entering directory `/obj/buildshare/ports/355755/security/yapet/work/yapet-1.0/glue' gmake[3]: Entering directory `/obj/buildshare/ports/355755/security/yapet/work/yapet-1.0/glue' gmake[3]: Nothing to be done for `install-exec-am'. gmake[3]: Nothing to be done for `install-data-am'. gmake[3]: Leaving directory `/obj/buildshare/ports/355755/security/yapet/work/yapet-1.0/glue' gmake[2]: Leaving directory `/obj/buildshare/ports/355755/security/yapet/work/yapet-1.0/glue' Making install in pwgen gmake[2]: Entering directory `/obj/buildshare/ports/355755/security/yapet/work/yapet-1.0/pwgen' gmake[3]: Entering directory `/obj/buildshare/ports/355755/security/yapet/work/yapet-1.0/pwgen' gmake[3]: Nothing to be done for `install-exec-am'. gmake[3]: Nothing to be done for `install-data-am'. gmake[3]: Leaving directory `/obj/buildshare/ports/355755/security/yapet/work/yapet-1.0/pwgen' gmake[2]: Leaving directory `/obj/buildshare/ports/355755/security/yapet/work/yapet-1.0/pwgen' Making install in csv2yapet gmake[2]: Entering directory `/obj/buildshare/ports/355755/security/yapet/work/yapet-1.0/csv2yapet' gmake[3]: Entering directory `/obj/buildshare/ports/355755/security/yapet/work/yapet-1.0/csv2yapet' /bin/mkdir -p '/obj/buildshare/ports/355755/security/yapet/work/stage/usr/local/bin' /bin/sh ../libtool --mode=install install -s -o root -g wheel -m 555 csv2yapet '/obj/buildshare/ports/355755/security/yapet/work/stage/usr/local/bin' libtool: install: install -o root -g wheel -m 555 -s csv2yapet /obj/buildshare/ports/355755/security/yapet/work/stage/usr/local/bin/csv2yapet gmake[3]: Nothing to be done for `install-data-am'. gmake[3]: Leaving directory `/obj/buildshare/ports/355755/security/yapet/work/yapet-1.0/csv2yapet' gmake[2]: Leaving directory `/obj/buildshare/ports/355755/security/yapet/work/yapet-1.0/csv2yapet' Making install in yapet2csv gmake[2]: Entering directory `/obj/buildshare/ports/355755/security/yapet/work/yapet-1.0/yapet2csv' gmake[3]: Entering directory `/obj/buildshare/ports/355755/security/yapet/work/yapet-1.0/yapet2csv' /bin/mkdir -p '/obj/buildshare/ports/355755/security/yapet/work/stage/usr/local/bin' /bin/sh ../libtool --mode=install install -s -o root -g wheel -m 555 yapet2csv '/obj/buildshare/ports/355755/security/yapet/work/stage/usr/local/bin' libtool: install: install -o root -g wheel -m 555 -s yapet2csv /obj/buildshare/ports/355755/security/yapet/work/stage/usr/local/bin/yapet2csv gmake[3]: Nothing to be done for `install-data-am'. gmake[3]: Leaving directory `/obj/buildshare/ports/355755/security/yapet/work/yapet-1.0/yapet2csv' gmake[2]: Leaving directory `/obj/buildshare/ports/355755/security/yapet/work/yapet-1.0/yapet2csv' Making install in yapet gmake[2]: Entering directory `/obj/buildshare/ports/355755/security/yapet/work/yapet-1.0/yapet' gmake[3]: Entering directory `/obj/buildshare/ports/355755/security/yapet/work/yapet-1.0/yapet' /bin/mkdir -p '/obj/buildshare/ports/355755/security/yapet/work/stage/usr/local/bin' /bin/sh ../libtool --mode=install install -s -o root -g wheel -m 555 yapet '/obj/buildshare/ports/355755/security/yapet/work/stage/usr/local/bin' libtool: install: install -o root -g wheel -m 555 -s yapet /obj/buildshare/ports/355755/security/yapet/work/stage/usr/local/bin/yapet gmake[3]: Nothing to be done for `install-data-am'. gmake[3]: Leaving directory `/obj/buildshare/ports/355755/security/yapet/work/yapet-1.0/yapet' gmake[2]: Leaving directory `/obj/buildshare/ports/355755/security/yapet/work/yapet-1.0/yapet' Making install in tests gmake[2]: Entering directory `/obj/buildshare/ports/355755/security/yapet/work/yapet-1.0/tests' Making install in preload gmake[3]: Entering directory `/obj/buildshare/ports/355755/security/yapet/work/yapet-1.0/tests/preload' gmake[4]: Entering directory `/obj/buildshare/ports/355755/security/yapet/work/yapet-1.0/tests/preload' gmake[4]: Nothing to be done for `install-exec-am'. gmake[4]: Nothing to be done for `install-data-am'. gmake[4]: Leaving directory `/obj/buildshare/ports/355755/security/yapet/work/yapet-1.0/tests/preload' gmake[3]: Leaving directory `/obj/buildshare/ports/355755/security/yapet/work/yapet-1.0/tests/preload' gmake[3]: Entering directory `/obj/buildshare/ports/355755/security/yapet/work/yapet-1.0/tests' gmake[4]: Entering directory `/obj/buildshare/ports/355755/security/yapet/work/yapet-1.0/tests' gmake[4]: Nothing to be done for `install-exec-am'. gmake[4]: Nothing to be done for `install-data-am'. gmake[4]: Leaving directory `/obj/buildshare/ports/355755/security/yapet/work/yapet-1.0/tests' gmake[3]: Leaving directory `/obj/buildshare/ports/355755/security/yapet/work/yapet-1.0/tests' gmake[2]: Leaving directory `/obj/buildshare/ports/355755/security/yapet/work/yapet-1.0/tests' Making install in doc gmake[2]: Entering directory `/obj/buildshare/ports/355755/security/yapet/work/yapet-1.0/doc' gmake[3]: Entering directory `/obj/buildshare/ports/355755/security/yapet/work/yapet-1.0/doc' gmake[3]: Nothing to be done for `install-exec-am'. /bin/mkdir -p '/obj/buildshare/ports/355755/security/yapet/work/stage/usr/local/share/doc/yapet/html' install -o root -g wheel -m 444 README.html DESIGN.html yapet.html csv2yapet.html yapet2csv.html '/obj/buildshare/ports/355755/security/yapet/work/stage/usr/local/share/doc/yapet/html' /bin/mkdir -p '/obj/buildshare/ports/355755/security/yapet/work/stage/usr/local/man/man1' install -o root -g wheel -m 444 yapet.1 csv2yapet.1 yapet2csv.1 '/obj/buildshare/ports/355755/security/yapet/work/stage/usr/local/man/man1' /bin/mkdir -p '/obj/buildshare/ports/355755/security/yapet/work/stage/usr/local/man/man5' install -o root -g wheel -m 444 yapet_colors.5 yapet_config.5 '/obj/buildshare/ports/355755/security/yapet/work/stage/usr/local/man/man5' gmake[3]: Leaving directory `/obj/buildshare/ports/355755/security/yapet/work/yapet-1.0/doc' gmake[2]: Leaving directory `/obj/buildshare/ports/355755/security/yapet/work/yapet-1.0/doc' gmake[2]: Entering directory `/obj/buildshare/ports/355755/security/yapet/work/yapet-1.0' gmake[3]: Entering directory `/obj/buildshare/ports/355755/security/yapet/work/yapet-1.0' gmake[3]: Nothing to be done for `install-exec-am'. /bin/mkdir -p '/obj/buildshare/ports/355755/security/yapet/work/stage/usr/local/share/applications' install -o root -g wheel -m 444 yapet.desktop '/obj/buildshare/ports/355755/security/yapet/work/stage/usr/local/share/applications' /bin/mkdir -p '/obj/buildshare/ports/355755/security/yapet/work/stage/usr/local/share/doc/yapet' install -o root -g wheel -m 444 README COPYING AUTHORS DESIGN LICENSE NEWS '/obj/buildshare/ports/355755/security/yapet/work/stage/usr/local/share/doc/yapet' gmake[3]: Leaving directory `/obj/buildshare/ports/355755/security/yapet/work/yapet-1.0' gmake[2]: Leaving directory `/obj/buildshare/ports/355755/security/yapet/work/yapet-1.0' gmake[1]: Leaving directory `/obj/buildshare/ports/355755/security/yapet/work/yapet-1.0' ====> Compressing man pages (compress-man) ===> Installing for yapet-1.0 ===> Checking if security/yapet already installed ===> Registering installation for yapet-1.0 Installing yapet-1.0... done Make package ===> Building package for yapet-1.0 slot1: removed