Building seam-carving-gui-1.11_2.txz (origin /buildshare/ports/355755/graphics/seam-carving-gui) for powerpc-10-0 on XXX
slot1: created
x distfiles/
x distfiles/SeamCarvingGui-Src-1.11.tar.gz
x packages/
x packages/fixesproto-5.0.txz
x packages/xorg-macros-1.19.0.txz
x packages/dejavu-2.34_3.txz
x packages/qt4-imageformats-4.8.6.txz
x packages/xtrans-1.3.4_1.txz
x packages/makedepend-1.0.5,1.txz
x packages/bdftopcf-1.0.4.txz
x packages/libXfontcache-1.0.5_2.txz
x packages/libXfont-1.4.7_3,1.txz
x packages/qt4-gui-4.8.6.txz
x packages/libpthread-stubs-0.3_4.txz
x packages/xineramaproto-1.2.1.txz
x packages/libXfixes-5.0.1_2.txz
x packages/jbigkit-1.6.txz
x packages/libffi-3.0.13_1.txz
x packages/libSM-1.2.2_2,1.txz
x packages/libpciaccess-0.13.2_2.txz
x packages/qt4-rcc-4.8.6.txz
x packages/libXau-1.0.8_2.txz
x packages/fontcacheproto-0.1.3.txz
x packages/encodings-1.0.4_1,1.txz
x packages/xorg-fonts-truetype-7.7_1.txz
x packages/libXdmcp-1.1.1_2.txz
x packages/perl5-5.16.3_10.txz
x packages/libGL-7.6.1_4.txz
x packages/mkfontdir-1.0.7.txz
x packages/libxslt-1.1.28_3.txz
x packages/libxml2-2.9.1_1.txz
x packages/pcre-8.34_1.txz
x packages/dri2proto-2.8.txz
x packages/icu-52.1.txz
x packages/qt4-svg-4.8.6.txz
x packages/cmake-2.8.12.1_4.txz
x packages/libXt-1.1.4_2,1.txz
x packages/inputproto-2.3.txz
x packages/libXi-1.7.2_2,1.txz
x packages/python27-2.7.6_4.txz
x packages/expat-2.1.0.txz
x packages/qt4-qmake-4.8.6.txz
x packages/freetype2-2.5.3_2.txz
x packages/renderproto-0.11.1.txz
x packages/bigreqsproto-1.1.2.txz
x packages/hicolor-icon-theme-0.12.txz
x packages/fontsproto-2.1.2.txz
x packages/xf86bigfontproto-1.2.0.txz
x packages/font-bh-ttf-1.0.3_1.txz
x packages/bison-2.7.1,1.txz
x packages/python2-2_2.txz
x packages/xextproto-7.3.0.txz
x packages/m4-1.4.17_1,1.txz
x packages/libXrender-0.9.8_2.txz
x packages/gmake-3.82_1.txz
x packages/damageproto-1.2.1.txz
x packages/libICE-1.0.8_2,1.txz
x packages/cups-client-1.7.2.txz
x packages/qt4-uic-4.8.6.txz
x packages/xcmiscproto-1.2.2.txz
x packages/pkgconf-0.9.5.txz
x packages/libgcrypt-1.5.3_2.txz
x packages/xproto-7.0.25.txz
x packages/py27-setuptools27-2.0.1.txz
x packages/libXxf86vm-1.1.3_2.txz
x packages/font-util-1.3.0_1.txz
x packages/py27-libxml2-2.9.1.txz
x packages/libiconv-1.14_3.txz
x packages/fontconfig-2.11.0_3,1.txz
x packages/libXcursor-1.1.14_2.txz
x packages/libdrm-2.4.17_1.txz
x packages/cmake-modules-2.8.12.1_1.txz
x packages/libXrandr-1.4.2_2.txz
x packages/randrproto-1.4.0.txz
x packages/font-misc-meltho-1.0.3_1.txz
x packages/libmng-1.0.10_2.txz
x packages/libXdamage-1.1.4_2.txz
x packages/font-misc-ethiopic-1.0.3_1.txz
x packages/libX11-1.6.2_2,1.txz
x packages/libXext-1.3.2_2,1.txz
x packages/xdg-utils-1.0.2.20130919_1.txz
x packages/libGLU-9.0.0.txz
x packages/png-1.5.18.txz
x packages/qt4-xml-4.8.6.txz
x packages/libfontenc-1.1.2_2.txz
x packages/libgpg-error-1.13.txz
x packages/lcms-1.19_3,1.txz
x packages/glib-2.36.3_2.txz
x packages/qt4-corelib-4.8.6.txz
x packages/xprop-1.2.2.txz
x packages/libtool-2.4.2_3.txz
x packages/mkfontscale-1.1.1_1.txz
x packages/xf86vidmodeproto-2.3.1.txz
x packages/qt4-moc-4.8.6.txz
x packages/kbproto-1.0.6.txz
x packages/libXmu-1.1.2_2,1.txz
x packages/gettext-0.18.3.1_1.txz
x packages/pkg-1.2.7_2.txz
x packages/libxcb-1.10_2.txz
x packages/xset-1.2.3_1.txz
x packages/jpeg-8_5.txz
x packages/libXinerama-1.1.3_2,1.txz
x packages/tiff-4.0.3_2.txz
x packages/glproto-1.4.17.txz
x packages/libcheck-0.9.12.txz
x packages/pciids-20140526.txz
x packages/freeglut-2.8.1_2.txz
x packages/xcb-proto-1.10_1.txz
ELF ldconfig path: /lib /usr/lib /usr/lib/compat
Make depends
===>   seam-carving-gui-1.11_2 depends on file: /usr/local/sbin/pkg - not found
===>    Verifying install for /usr/local/sbin/pkg in /buildshare/ports/355755/ports-mgmt/pkg
===>   Installing existing package /packages/pkg-1.2.7_2.txz
Installing pkg-1.2.7_2... done
If you are upgrading from the old package format, first run:

  # pkg2ng
===>   Returning to build of seam-carving-gui-1.11_2
===>   seam-carving-gui-1.11_2 depends on executable: gmake - not found
===>    Verifying install for gmake in /buildshare/ports/355755/devel/gmake
===>   Installing existing package /packages/gmake-3.82_1.txz
Installing gmake-3.82_1...Installing gettext-0.18.3.1_1... done
 done
===>   Returning to build of seam-carving-gui-1.11_2
===>   seam-carving-gui-1.11_2 depends on file: /usr/local/lib/qt4/libQtGui.so - not found
===>    Verifying install for /usr/local/lib/qt4/libQtGui.so in /buildshare/ports/355755/x11-toolkits/qt4-gui
===>   Installing existing package /packages/qt4-gui-4.8.6.txz
Installing qt4-gui-4.8.6...Installing encodings-1.0.4_1,1...Installing font-util-1.3.0_1... done
 done
Installing fontconfig-2.11.0_3,1...Installing expat-2.1.0... done
Installing freetype2-2.5.3_2... done
Running fc-cache to build fontconfig cache...
/usr/local/share/fonts: skipping, no such directory
/usr/local/lib/X11/fonts: caching, new cache contents: 0 fonts, 3 dirs
/usr/local/lib/X11/fonts/encodings: caching, new cache contents: 0 fonts, 1 dirs
/usr/local/lib/X11/fonts/encodings/large: caching, new cache contents: 0 fonts, 0 dirs
/usr/local/lib/X11/fonts/local: caching, new cache contents: 0 fonts, 0 dirs
/usr/local/lib/X11/fonts/util: caching, new cache contents: 0 fonts, 0 dirs
/root/.local/share/fonts: skipping, no such directory
/root/.fonts: skipping, no such directory
/usr/local/share/fonts: skipping, no such directory
/usr/local/lib/X11/fonts: caching, new cache contents: 0 fonts, 3 dirs
/root/.local/share/fonts: skipping, no such directory
/root/.fonts: skipping, no such directory
/var/db/fontconfig: cleaning cache directory
/root/.cache/fontconfig: not cleaning non-existent cache directory
/root/.fontconfig: not cleaning non-existent cache directory
fc-cache: succeeded
 done
Installing libICE-1.0.8_2,1...Installing xproto-7.0.25... done
 done
Installing libSM-1.2.2_2,1... done
Installing libX11-1.6.2_2,1...Installing kbproto-1.0.6... done
Installing libXau-1.0.8_2... done
Installing libXdmcp-1.1.1_2... done
Installing libxcb-1.10_2...Installing libpthread-stubs-0.3_4... done
Installing libxml2-2.9.1_1... done
 done
 done
Installing libXcursor-1.1.14_2...Installing libXfixes-5.0.1_2...Installing fixesproto-5.0... done
 done
Installing libXrender-0.9.8_2...Installing renderproto-0.11.1... done
 done
 done
Installing libXext-1.3.2_2,1...Installing xextproto-7.3.0... done
 done
Installing libXi-1.7.2_2,1...Installing inputproto-2.3... done
 done
Installing libXinerama-1.1.3_2,1...Installing xineramaproto-1.2.1... done
 done
Installing libXrandr-1.4.2_2...Installing randrproto-1.4.0... done
 done
Installing libXt-1.1.4_2,1... done
Installing png-1.5.18... done
Installing qt4-corelib-4.8.6...Installing glib-2.36.3_2...Installing libffi-3.0.13_1... done
Installing libiconv-1.14_3... done
Installing pcre-8.34_1... done
Installing perl5-5.16.3_10... done
Installing python27-2.7.6_4... done
No schema files found: doing nothing.
 done
Installing icu-52.1... done
 done
Installing xdg-utils-1.0.2.20130919_1...Installing hicolor-icon-theme-0.12... done
Installing xprop-1.2.2...Installing libXmu-1.1.2_2,1... done
 done
Installing xset-1.2.3_1...Installing libXfontcache-1.0.5_2...Installing fontcacheproto-0.1.3... done
 done
 done
 done
Installing xorg-fonts-truetype-7.7_1...Installing dejavu-2.34_3... done
Installing font-bh-ttf-1.0.3_1...Installing mkfontdir-1.0.7...Installing mkfontscale-1.1.1_1...Installing libfontenc-1.1.2_2... done
 done
 done
 done
Installing font-misc-ethiopic-1.0.3_1... done
Installing font-misc-meltho-1.0.3_1... done
 done
 done
====
Note that some of the standard modules are provided as separate
ports since they require extra dependencies:

bsddb           databases/py-bsddb
gdbm            databases/py-gdbm
sqlite3         databases/py-sqlite3
tkinter         x11-toolkits/py-tkinter

Install them as needed.
====
======================================================================

Qt 4 can be built with optional support for:
 - Common UNIX Printing System (CUPS) (enabled by default)
 - Network Audio System (NAS)
 - Qt style that renders using GTK (QGTKSTYLE)

In order to enable them, you have to add
	QT4_OPTIONS=	CUPS NAS QGTKSTYLE
to your /etc/make.conf and compile devel/qt4-corelib and
x11-toolkits/qt4-gui ports.

Attention! Whenever you change the QT4_OPTIONS both
devel/qt4-corelib and x11-toolkits/qt4-gui ports must be rebuilt!

======================================================================
Make sure that the freetype module is loaded.  If it is not, add the following
line to the "Modules" section of your X Windows configuration file:

	Load "freetype"

Add the following line to the "Files" section of X Windows configuration file:

	FontPath "/usr/local/lib/X11/fonts/dejavu/"

Note: your X Windows configuration file is typically /etc/X11/XF86Config
if you are using XFree86, and /etc/X11/xorg.conf if you are using X.Org.
======================================================================

Qt paint engine makes common use of shared memory. To avoid MIT-SHM
errors (i.e., blank windows), you probably need to raise shared memory
limits in loader.conf(5). The following should be safe values for the
KDE Plasma Desktop:

kern.ipc.shmall=32768
kern.ipc.shmmni=1024
kern.ipc.shmseg=1024

======================================================================
===>   Returning to build of seam-carving-gui-1.11_2
===>   seam-carving-gui-1.11_2 depends on file: /usr/local/bin/moc-qt4 - not found
===>    Verifying install for /usr/local/bin/moc-qt4 in /buildshare/ports/355755/devel/qt4-moc
===>   Installing existing package /packages/qt4-moc-4.8.6.txz
Installing qt4-moc-4.8.6... done
===>   Returning to build of seam-carving-gui-1.11_2
===>   seam-carving-gui-1.11_2 depends on file: /usr/local/bin/qmake-qt4 - not found
===>    Verifying install for /usr/local/bin/qmake-qt4 in /buildshare/ports/355755/devel/qmake4
===>   Installing existing package /packages/qt4-qmake-4.8.6.txz
Installing qt4-qmake-4.8.6... done
===>   Returning to build of seam-carving-gui-1.11_2
===>   seam-carving-gui-1.11_2 depends on file: /usr/local/bin/uic-qt4 - not found
===>    Verifying install for /usr/local/bin/uic-qt4 in /buildshare/ports/355755/devel/qt4-uic
===>   Installing existing package /packages/qt4-uic-4.8.6.txz
Installing qt4-uic-4.8.6... done
===>   Returning to build of seam-carving-gui-1.11_2
===>   seam-carving-gui-1.11_2 depends on file: /usr/local/lib/qt4/libQtGui.so - found
===>   seam-carving-gui-1.11_2 depends on file: /usr/local/lib/qt4/plugins/imageformats/libqtiff.so - not found
===>    Verifying install for /usr/local/lib/qt4/plugins/imageformats/libqtiff.so in /buildshare/ports/355755/graphics/qt4-imageformats
===>   Installing existing package /packages/qt4-imageformats-4.8.6.txz
Installing qt4-imageformats-4.8.6...Installing jpeg-8_5... done
Installing libmng-1.0.10_2...Installing lcms-1.19_3,1...Installing tiff-4.0.3_2...Installing freeglut-2.8.1_2...Installing libGLU-9.0.0...Installing libGL-7.6.1_4...Installing dri2proto-2.8... done
Installing libXdamage-1.1.4_2...Installing damageproto-1.2.1... done
 done
Installing libXxf86vm-1.1.3_2...Installing xf86vidmodeproto-2.3.1... done
 done
Installing libdrm-2.4.17_1...Installing libpciaccess-0.13.2_2...Installing pciids-20140526... done
 done
 done
 done
 done
 done
Installing jbigkit-1.6... done
 done
 done
 done
Installing qt4-svg-4.8.6... done
Installing qt4-xml-4.8.6... done
 done
Since FreeBSD has new USB stack, freeglut normally doesn't build on FreeBSD 8
(yet). To workaround this a small patch adds one include file and comments out
content of one function (only leaves return NULL).

This might cause side effects.  Joysticks do not work, and there might be ports
that do not compile or applications that crash because of this.

Do not hesitate to contact x11@FreeBSD.org if there are any issues and side
effects because of this.
===>   Returning to build of seam-carving-gui-1.11_2
Make install
===>   seam-carving-gui-1.11_2 depends on file: /usr/local/sbin/pkg - found
===> Fetching all distfiles required by seam-carving-gui-1.11_2 for building
===>  Extracting for seam-carving-gui-1.11_2
=> SHA256 Checksum OK for SeamCarvingGui-Src-1.11.tar.gz.
===>  Patching for seam-carving-gui-1.11_2
===>  Applying FreeBSD patches for seam-carving-gui-1.11_2
===>   seam-carving-gui-1.11_2 depends on executable: gmake - found
===>   seam-carving-gui-1.11_2 depends on file: /usr/local/lib/qt4/libQtGui.so - found
===>   seam-carving-gui-1.11_2 depends on file: /usr/local/bin/moc-qt4 - found
===>   seam-carving-gui-1.11_2 depends on file: /usr/local/bin/qmake-qt4 - found
===>   seam-carving-gui-1.11_2 depends on file: /usr/local/bin/uic-qt4 - found
===>  Configuring for seam-carving-gui-1.11_2
===>  Building for seam-carving-gui-1.11_2
gmake[1]: Entering directory `/obj/buildshare/ports/355755/graphics/seam-carving-gui/work/Src Seam Carving GUI 1.11'
/usr/local/bin/uic-qt4 resizewidget.ui -o ui_resizewidget.h
c++ -c -O2 -pipe -fno-strict-aliasing -Wall -W -pthread -D_THREAD_SAFE -DBACKEND_CAIR -DQT_NO_DEBUG -DQT_GUI_LIB -DQT_CORE_LIB -DQT_SHARED -I/usr/local/share/qt4/mkspecs/freebsd-g++ -I. -I/usr/local/include/qt4/QtCore -I/usr/local/include/qt4/QtGui -I/usr/local/include/qt4 -I. -I. -I/usr/local/include/qt4 -I/usr/local/include -o CAIR.o cair/CAIR.cpp
c++ -c -O2 -pipe -fno-strict-aliasing -Wall -W -pthread -D_THREAD_SAFE -DBACKEND_CAIR -DQT_NO_DEBUG -DQT_GUI_LIB -DQT_CORE_LIB -DQT_SHARED -I/usr/local/share/qt4/mkspecs/freebsd-g++ -I. -I/usr/local/include/qt4/QtCore -I/usr/local/include/qt4/QtGui -I/usr/local/include/qt4 -I. -I. -I/usr/local/include/qt4 -I/usr/local/include -o main.o main.cpp
c++ -c -O2 -pipe -fno-strict-aliasing -Wall -W -pthread -D_THREAD_SAFE -DBACKEND_CAIR -DQT_NO_DEBUG -DQT_GUI_LIB -DQT_CORE_LIB -DQT_SHARED -I/usr/local/share/qt4/mkspecs/freebsd-g++ -I. -I/usr/local/include/qt4/QtCore -I/usr/local/include/qt4/QtGui -I/usr/local/include/qt4 -I. -I. -I/usr/local/include/qt4 -I/usr/local/include -o mainwindow.o mainwindow.cpp
/usr/local/bin/moc-qt4 -DBACKEND_CAIR -DQT_NO_DEBUG -DQT_GUI_LIB -DQT_CORE_LIB -DQT_SHARED -I/usr/local/share/qt4/mkspecs/freebsd-g++ -I. -I/usr/local/include/qt4/QtCore -I/usr/local/include/qt4/QtGui -I/usr/local/include/qt4 -I. -I. -I/usr/local/include/qt4 -I/usr/local/include mainwindow.h -o moc_mainwindow.cpp
c++ -c -O2 -pipe -fno-strict-aliasing -Wall -W -pthread -D_THREAD_SAFE -DBACKEND_CAIR -DQT_NO_DEBUG -DQT_GUI_LIB -DQT_CORE_LIB -DQT_SHARED -I/usr/local/share/qt4/mkspecs/freebsd-g++ -I. -I/usr/local/include/qt4/QtCore -I/usr/local/include/qt4/QtGui -I/usr/local/include/qt4 -I. -I. -I/usr/local/include/qt4 -I/usr/local/include -o moc_mainwindow.o moc_mainwindow.cpp
c++ -Wl,-O1 -pthread -Wl,-rpath,/usr/local/lib/qt4 -o SeamCarvingGui CAIR.o main.o mainwindow.o moc_mainwindow.o    -L/usr/local/lib/qt4 -L/usr/local/lib -lQtGui -L/usr/local/lib -L/usr/local/lib/qt4 -lQtCore 
gmake[1]: Leaving directory `/obj/buildshare/ports/355755/graphics/seam-carving-gui/work/Src Seam Carving GUI 1.11'
===>  Staging for seam-carving-gui-1.11_2
===>   seam-carving-gui-1.11_2 depends on file: /usr/local/lib/qt4/libQtGui.so - found
===>   seam-carving-gui-1.11_2 depends on file: /usr/local/lib/qt4/plugins/imageformats/libqtiff.so - found
===>   Generating temporary packing list
install  -o root -g wheel -m 555 /obj/buildshare/ports/355755/graphics/seam-carving-gui/work/Src\ Seam\ Carving\ GUI\ 1.11/SeamCarvingGui /obj/buildshare/ports/355755/graphics/seam-carving-gui/work/stage/usr/local/bin
====> Compressing man pages (compress-man)
===>  Installing for seam-carving-gui-1.11_2
===>  Checking if graphics/seam-carving-gui already installed
===>   Registering installation for seam-carving-gui-1.11_2
Installing seam-carving-gui-1.11_2... done
Make package
===>  Building package for seam-carving-gui-1.11_2
slot1: removed