lstewart4# /cpm/cpmd
14:28:02 main.c:299 main() starting.  version: 0.8.3 svn: 708
14:28:02 main.c:301 main() loading config file: /etc/cpmd.conf
14:28:02 main.c:341 main() timeslots=2 cycles=64 qentries=8192 circuits=1 outlets=4
14:28:02 main.c:403 main() cpmd cli bound to 0.0.0.0:7777
14:28:02 cps.c:774 cps_open() timeslots must be >= 8.  increasing 2 --> 8
14:28:02 cps.c:469 setup_spi() SPI: baudrate=9 delay_xfr=0 delay_ucast=0 delay_bcast=128
14:28:02 port.c:364 port_init() ports=7 clients=128 psd_enabled=1 psd_baseport=5000
14:28:02 port.c:584 port_init() 7 ports initalized.
14:28:02 : () Loading config file /cpm/shttpd.conf
14:28:02 : () [ôö ¬õ ] [error] [client -] "-" Loading config file /cpm/shttpd.conf
14:28:03 port_flags.c:368 port_set_flags() port lstewart4-3 flags ENA=1  flags=0x65 mask=0x1
14:28:03 module.c:44 module_v_limit_func() Module 1 power on
14:28:03 module.c:88 module_i_limit_func() Module 1 Current under: 0.67
14:28:03 circuit.c:54 circuit_v_limit_func() Circuit 1 power on
14:28:03 circuit.c:76 circuit_i_limit_func() Circuit 1 current under: 0.67
14:28:03 module.c:62 module_psv_limit_func() Module 1 power supply: OK
14:28:04 cps.c:119 cps_reset_serbrd() cps_reset_serbrd: isp=0
14:28:04 cps.c:594 cps_resetserialboards() cps_resetserialboards: isp=0
14:28:04 serbrd.c:68 serbrd_input() timeslot 0 reboot: EXTR (2)
14:28:04 serbrd.c:68 serbrd_input() timeslot 0 reboot: EXTR (2)
14:28:04 serbrd.c:78 serbrd_input() timeslot 0 version 1.6.6 svn:707 compile:1208031603
14:28:04 serbrd.c:68 serbrd_input() timeslot 1 reboot: EXTR (2)
14:28:04 serbrd.c:68 serbrd_input() timeslot 1 reboot: EXTR (2)
14:28:04 serbrd.c:78 serbrd_input() timeslot 1 version 1.6.6 svn:707 compile:1208031603
14:28:05 port_flags.c:269 port_set_flags_bin() setting port lstewart4-5 tty(30) DTR=0 RTS=0
14:28:05 port_flags.c:269 port_set_flags_bin() setting port lstewart4-5 tty(30) DTR=0 RTS=0
14:28:05 ../libcpm/tty.c:19 tty_set_dtr() fd=30 state=0
14:28:05 port_flags.c:269 port_set_flags_bin() setting port lstewart4-5 tty(30) DTR=0 RTS=0
14:28:05 ../libcpm/tty.c:43 tty_set_rts() fd=30 state=0
14:28:05 port_flags.c:269 port_set_flags_bin() setting port lstewart4-6 tty(32) DTR=0 RTS=0
14:28:05 port_flags.c:269 port_set_flags_bin() setting port lstewart4-6 tty(32) DTR=0 RTS=0
14:28:05 ../libcpm/tty.c:19 tty_set_dtr() fd=32 state=0
14:28:05 port_flags.c:269 port_set_flags_bin() setting port lstewart4-6 tty(32) DTR=0 RTS=0
14:28:05 ../libcpm/tty.c:43 tty_set_rts() fd=32 state=0
14:28:05 configuration.c:579 load_configuration_file() configuration loaded from /etc/cpmd.cfg
14:28:05 ../libcpm/iotcp.c:819 tcp_connect_connect() tcp_connect(172.16.1.1,8000): connect failed: Permission denied
14:28:05 ../libcpm/iotcp.c:819 tcp_connect_connect() tcp_connect(172.16.1.2,8000): connect failed: Permission denied
14:28:23 port.c:294 port_rs232_limit_func() port 3 rs232 driver overload.  port disabled.
14:28:23 port_flags.c:368 port_set_flags() port lstewart4-3 flags ENA=0  flags=0x64 mask=0x1