KDB: debugger backends: ddb KDB: current backend: ddb ---<>--- Copyright (c) 1992-2019 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 13.0-CURRENT r347033 GENERIC powerpc gcc version 4.2.1 20070831 patched [FreeBSD] WARNING: WITNESS option enabled, expect reduced performance. VT: init without driver. cpu0: IBM POWER9 revision 2.2, 2700.00 MHz cpu0: Features dc007182 cpu0: Features2 ffe00000 real memory = 137341812736 (130979 MB) avail memory = 131974488064 (125860 MB) FreeBSD/SMP: Multiprocessor System Detected: 16 CPUs __stack_chk_init: WARNING: Initializing stack protection with non-random cookies! __stack_chk_init: WARNING: This severely limits the benefit of -fstack-protector! random: entropy device external interface kbd0 at kbdmux0 random: registering fast source PowerISA DARN random number generator random: fast provider: "PowerISA DARN random number generator" 000.000064 [4254] netmap_init netmap: loaded module ofwbus0: on nexus0 opal0: irq 1048560,1048561,1048562,1048563,1048564,1048565,1048566,1048567,1048568,1048569,1048570,1048571,1048572,1048573 on ofwbus0 opal0: registered as a time-of-day clock, resolution 0.002000s simplebus0: mem 0x6030000000000-0x60300ffffffff on ofwbus0 pcib0: mem 0x600c3c0000000-0x600c3c0000fff,0x600c300000000-0x600c30fffffff on ofwbus0 pci0: numa-domain 0 on pcib0 pcib1: at device 0.0 numa-domain 0 on pci0 pci1: numa-domain 0 on pcib1 pcib2: mem 0x600c3c0100000-0x600c3c0100fff,0x600c320000000-0x600c32fffffff on ofwbus0 pci2: numa-domain 0 on pcib2 pcib3: at device 0.0 numa-domain 0 on pci2 pci3: numa-domain 0 on pcib3 pcib4: mem 0x600c3c0200000-0x600c3c0200fff,0x600c340000000-0x600c34fffffff on ofwbus0 pci4: numa-domain 0 on pcib4 pcib5: at device 0.0 numa-domain 0 on pci4 pci5: numa-domain 0 on pcib5 pcib4: failed to reserve resource for pcib5 pcib4: failed to reserve resource for pcib5 pcib4: failed to reserve resource for pcib5 pcib4: failed to reserve resource for pcib5 pcib4: failed to reserve resource for pcib5 pcib4: failed to reserve resource for pcib5 pcib4: failed to reserve resource for pcib5 pcib4: failed to reserve resource for pcib5 pcib4: failed to reserve resource for pcib5 pcib4: failed to reserve resource for pcib5 pcib6: mem 0x600c3c0300000-0x600c3c0300fff,0x600c360000000-0x600c36fffffff on ofwbus0 pci6: numa-domain 0 on pcib6 pcib7: at device 0.0 numa-domain 0 on pci6 pci7: numa-domain 0 on pcib7 pcib8: mem 0x600c3c0400000-0x600c3c0400fff,0x600c380000000-0x600c38fffffff on ofwbus0 pci8: numa-domain 0 on pcib8 pcib9: at device 0.0 numa-domain 0 on pci8 pci9: numa-domain 0 on pcib9 pcib10: mem 0x600c3c0500000-0x600c3c0500fff,0x600c3a0000000-0x600c3afffffff on ofwbus0 pci10: numa-domain 0 on pcib10 pcib11: at device 0.0 numa-domain 0 on pci10 pci11: numa-domain 0 on pcib11 pcib12: irq 1030136 at device 0.0 numa-domain 0 on pci11 pci12: numa-domain 0 on pcib12 xive0: mem 0x6030203180000-0x603020318ffff,0x6030203190000-0x603020319ffff,0x60302031a0000-0x60302031affff,0x60302031b0000-0x60302031bffff on ofwbus0 xivevc0: on ofwbus0 cpulist0: on ofwbus0 cpu0: on cpulist0 pmcr0: on cpu0 cpu1: on cpulist0 pmcr1: on cpu1 cpu2: on cpulist0 pmcr2: on cpu2 cpu3: on cpulist0 pmcr3: on cpu3 opalcons0: on opal0 uart0: on opalcons0 uart0: console opalflash0: on opal0 opalsens0: on opal0 opal_sensor0: on opalsens0 opal_sensor1: on opalsens0 opal_sensor2: on opalsens0 opal_sensor3: on opalsens0 opal_sensor4: on opalsens0 opal_sensor5: on opalsens0 opal_sensor6: on opalsens0 opal_sensor7: on opalsens0 opal_sensor8: on opalsens0 opal_sensor9: on opalsens0 opal_sensor10: on opalsens0 opal_sensor11: on opalsens0 opal_sensor12: on opalsens0 opal_sensor13: on opalsens0 opal_sensor14: on opalsens0 opal_sensor15: on opalsens0 opal_sensor16: on opalsens0 opal_sensor17: on opalsens0 opal_sensor18: on opalsens0 opal_sensor19: on opalsens0 opal_sensor20: on opalsens0 opal_sensor21: on opalsens0 opal_sensor22: on opalsens0 opal_sensor23: on opalsens0 opal_sensor24: on opalsens0 opal_sensor25: on opalsens0 opal_sensor26: on opalsens0 opal_sensor27: on opalsens0 opal_sensor28: on opalsens0 opal_sensor29: on opalsens0 opal_sensor30: on opalsens0 opal_sensor31: on opalsens0 opal_sensor32: on opalsens0 opal_sensor33: on opalsens0 nvme0: mem 0x80000000-0x80003fff irq 1040376 at device 0.0 numa-domain 0 on pci3 ahci0: mem 0x80000000-0x800007ff irq 1038328 at device 0.0 numa-domain 0 on pci5 ahci0: AHCI v1.00 with 4 6Gbps ports, Port Multiplier supported with FBS ahcich0: at channel 0 on ahci0 ahcich1: at channel 1 on ahci0 ahcich2: at channel 2 on ahci0 ahcich3: at channel 3 on ahci0 xhci0: mem 0x80000000-0x8000ffff,0x80010000-0x80011fff irq 1036280 at device 0.0 numa-domain 0 on pci7 xhci0: 64 bytes context size, 64-bit DMA usbus0 numa-domain 0 on xhci0 bge0: mem 0x6024000000000-0x602400000ffff,0x6024000010000-0x602400001ffff,0x6024000020000-0x602400002ffff irq 1032184 at device 0.0 numa-domain 0 on pci9 bge0: APE FW version: NCSI v1.3.12.0 bge0: CHIP ID 0x05719001; ASIC REV 0x5719; CHIP REV 0x57190; PCI-E miibus0: numa-domain 0 on bge0 brgphy0: PHY 1 on miibus0 brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow bge0: Using defaults for TSO: 65518/35/2048 bge0: Ethernet address: xx:xx:xx:xx:xx:xx bge1: mem 0x6024000030000-0x602400003ffff,0x6024000040000-0x602400004ffff,0x6024000050000-0x602400005ffff irq 1032185 at device 0.1 numa-domain 0 on pci9 bge1: APE FW version: NCSI v1.3.12.0 bge1: CHIP ID 0x05719001; ASIC REV 0x5719; CHIP REV 0x57190; PCI-E miibus1: numa-domain 0 on bge1 brgphy1: PHY 9 on miibus1 brgphy1: 1000baseSX-FDX, auto bge1: Using defaults for TSO: 65518/35/2048 bge1: Ethernet address: xx:xx:xx:xx:xx:xx bge2: mem 0x6024000060000-0x602400006ffff,0x6024000070000-0x602400007ffff,0x6024000080000-0x602400008ffff irq 1032184 at device 0.2 numa-domain 0 on pci9 bge2: APE FW version: NCSI v1.3.12.0 bge2: CHIP ID 0x05719001; ASIC REV 0x5719; CHIP REV 0x57190; PCI-E miibus2: numa-domain 0 on bge2 brgphy2: PHY 3 on miibus2 brgphy2: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow bge2: Using defaults for TSO: 65518/35/2048 bge2: Ethernet address: xx:xx:xx:xx:xx:xx vgapci0: mem 0x80000000-0x80ffffff,0x81000000-0x8101ffff irq 1030136 at device 0.0 numa-domain 0 on pci12 powernv_xscom0: mem 0x603fc00000000-0x60403ffffffff on ofwbus0 opal_i2cm0: on powernv_xscom0 iichb0: on opal_i2cm0 iicbus0: on iichb0 iic0: on iicbus0 iicbus0: at addr 0xa0 iichb1: on opal_i2cm0 iicbus1: on iichb1 iic1: on iicbus1 iicbus1: at addr 0xa0 opal_i2cm1: on powernv_xscom0 iichb2: on opal_i2cm1 iicbus2: on iichb2 iic2: on iicbus2 iicbus2: at addr 0xa0 opal_i2cm2: on powernv_xscom0 iichb3: on opal_i2cm2 iicbus3: on iichb3 iic3: on iicbus3 iicbus3: at addr 0xa0 iicbus3: at addr 0xa2 iicbus3: at addr 0xa4 iicbus3: at addr 0xa6 iichb4: on opal_i2cm2 iicbus4: on iichb4 iic4: on iicbus4 iicbus4: at addr 0xa8 iicbus4: at addr 0xaa iicbus4: at addr 0xac iicbus4: at addr 0xae cryptosoft0: on nexus0 Timecounter "timebase" frequency 512000000 Hz quality 0 Event timer "decrementer" frequency 512000000 Hz quality 1000 Timecounters tick every 1.000 msec arc4random: WARNING: initial seeding bypassed the cryptographic random device because it was not yet seeded and the knob 'bypass_before_seeding' was enabled. usbus0: 5.0Gbps Super Speed USB v3.0 ugen0.1: <0x104c XHCI root HUB> at usbus0 uhub0: <0x104c XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 Launching APs: 2 1 12 11 13 10 5 6 9 15 14 8 7 4 3 Trying to mount root from cd9660:/dev/iso9660/13_0_CURRENT_POWERPC64_CD []... nda0 at nvme0 bus 0 scbus4 target 0 lun 1 nda0: WARNING: WITNESS option enabled, expect reduced performance. nda0: nvme version 1.2 x4 (max x4) lanes PCIe Gen3 (max Gen3) link nda0: 476940MB (976773168 512 byte sectors) Root mount waiting for: usbus0 uhub0: 8 ports with 8 removable, self powered ugen0.2: at usbus0 umass0 numa-domain 0 on uhub0 umass0: on usbus0 umass0: SCSI over Bulk-Only; quirks = 0x4101 umass0:5:0: Attached to scbus5 Root mount waiting for: usbus0 da0 at umass-sim0 bus 0 scbus5 target 0 lun 0 da0: Removable Direct Access SPC-2 SCSI device da0: Serial Number 629F9B63 da0: 40.000MB/s transfers da0: 15300MB (31334400 512 byte sectors) da0: quirks=0x2 GEOM_PART: integrity check failed (da0, APM) GEOM_PART: integrity check failed (iso9660/13_0_CURRENT_POWERPC64_CD, APM) GEOM_PART: integrity check failed (diskid/DISK-629F9B63, APM) GEOM_PART: integrity check failed (da0, APM) ugen0.3: at usbus0 uhub1 numa-domain 0 on uhub0 uhub1: on usbus0 uhub1: 5 ports with 5 removable, self powered Root mount waiting for: usbus0 ugen0.4: at usbus0 ukbd0 numa-domain 0 on uhub1 ukbd0: on usbus0 kbd1 at ukbd0 ums0 numa-domain 0 on uhub1 ums0: on usbus0 Root mount waiting for: usbus0 ugen0.5: at usbus0 uhub2 numa-domain 0 on uhub0 uhub2: on usbus0 uhub2: MTT enabled uhub2: 4 ports with 4 removable, self powered Root mount waiting for: usbus0 ugen0.6: at usbus0 uaudio0 numa-domain 0 on uhub2 uaudio0: on usbus0 uaudio0: Play: 48000 Hz, 4 ch, 16-bit S-LE PCM format, 2x8ms buffer. uaudio0: Play: 44100 Hz, 4 ch, 16-bit S-LE PCM format, 2x8ms buffer. uaudio0: Record: 48000 Hz, 2 ch, 16-bit S-LE PCM format, 2x8ms buffer. uaudio0: Record: 44100 Hz, 2 ch, 16-bit S-LE PCM format, 2x8ms buffer. uaudio0: No MIDI sequencer. pcm0: numa-domain 0 on uaudio0 uaudio0: HID volume keys found. mountroot: waiting for device /dev/iso9660/13_0_CURRENT_POWERPC64_CD... uhub_explore: illegal enable change, port 1 No suitable dump device was found. Starting file system checks: Mounting local filesystems:. ELF ldconfig path: /lib /usr/lib /usr/lib/compat random: unblocking device. 32-bit compatibility ldconfig path: Building /boot/kernel/linker.hints kldxref: can't create /boot/lhint.YK4cgq: Read-only file system /etc/rc: WARNING: $hostname is not set -- see rc.conf(5). Setting up harvesting: PURE_DARN,[UMA],[FS_ATIME],SWI,INTERRUPT,NET_NG,[NET_ETHER],NET_TUN,MOUSE,KEYBOARD,ATTACH,CACHED Feeding entropy: dd: /entropy: Read-only file system dd: /boot/entropy: Read-only file system . lo0: link state changed to UP Starting Network: lo0 bge0 bge1 bge2. lo0: flags=8049 metric 0 mtu 16384 options=680003 inet6 ::1 prefixlen 128 inet6 fe80::1%lo0 prefixlen 64 scopeid 0x4 inet 127.0.0.1 netmask 0xff000000 nd6 options=21 groups: lo bge0: flags=8802 metric 0 mtu 1500 options=c019b ether xx:xx:xx:xx:xx:95 nd6 options=29 media: Ethernet autoselect bge1: flags=8802 metric 0 mtu 1500 options=c019b ether xx:xx:xx:xx:xx:xx nd6 options=29 media: Ethernet autoselect bge2: flags=8802 metric 0 mtu 1500 options=c019b ether xx:xx:xx:xx:xx:xx nd6 options=29 media: Ethernet autoselect Starting devd. devmatch: Can't read linker hints file. devmatch: Can't read linker hints file. devmatch: Can't read linker hints file. devmatch: Can't read linker hints file. devmatch: Can't read linker hints file. devmatch: Can't read linker hints file. devmatch: Can't read linker hints file. devmatch: Can't read linker hints file. devmatch: Can't read linker hints file. devmatch: Can't read linker hints file. devmatch: Can't read linker hints file. devmatch: Can't read linker hints file. devmatch: Can't read linker hints file. devmatch: Can't read linker hints file. devmatch: Can't read linker hints file. devmatch: Can't read linker hints file. devmatch: Can't read linker hints file. devmatch: Can't read linker hints file. devmatch: Can't read linker hints file. devmatch: Can't read linker hints file. devmatch: Can't read linker hints file. devmatch: Can't read linker hints file. devmatch: Can't read linker hints file. devmatch: Can't read linker hints file. devmatch: Can't read linker hints file. devmatch: Can't read linker hints file. devmatch: Can't read linker hints file. devmatch: Can't read linker hints file. devmatch: Can't read linker hints file. devmatch: Can't read linker hints file. devmatch: Can't read linker hints file. devmatch: Can't read linker hints file. Starting Network: bge0. bge0: flags=8802 metric 0 mtu 1500 options=c019b ether xx:xx:xx:xx:xx:xx nd6 options=29 media: Ethernet autoselect Starting Network: bge1. bge1: flags=8802 metric 0 mtu 1500 options=c019b ether xx:xx:xx:xx:xx:xx nd6 options=29 media: Ethernet autoselect Starting Network: bge2. bge2: flags=8802 metric 0 mtu 1500 options=c019b ether xx:xx:xx:xx:xx:xx nd6 options=29 media: Ethernet autoselect devmatch: Can't read linker hints file. devmatch: Can't read linker hints file. devmatch: Can't read linker hints file. devmatch: Can't read linker hints file. devmatch: Can't read linker hints file. devmatch: Can't read linker hints file. devmatch: Can't read linker hints file. devmatch: Can't read linker hints file. devmatch: Can't read linker hints file. devmatch: Can't read linker hints file. devmatch: Can't read linker hints file. devmatch: Can't read linker hints file. devmatch: Can't read linker hints file. devmatch: Can't read linker hints file. devmatch: Can't read linker hints file. devmatch: Can't read linker hints file. devmatch: Can't read linker hints file. devmatch: Can't read linker hints file. devmatch: Can't read linker hints file. devmatch: Can't read linker hints file. devmatch: Can't read linker hints file. devmatch: Can't read linker hints file. devmatch: Can't read linker hints file. devmatch: Can't read linker hints file. devmatch: Can't read linker hints file. devmatch: Can't read linker hints file. devmatch: Can't read linker hints file. devmatch: Can't read linker hints file. eval: cannot open /dev/ttyv0: No such file or directory eval: cannot open /dev/ttyv0: No such file or directory Starting ums0 moused. eval: cannot open /dev/ttyv*: No such file or directory add host 127.0.0.1: gateway lo0 fib 0: route already in table add host ::1: gateway lo0 fib 0: route already in table add net fe80::: gateway ::1 add net ff02::: gateway ::1 add net ::ffff:0.0.0.0: gateway ::1 add net ::0.0.0.0: gateway ::1 Generating host.conf. eval: cannot create /etc/host.conf: Read-only file system eval: cannot create /etc/host.conf: Read-only file system eval: cannot create /etc/host.conf: Read-only file system Creating and/or trimming log files. Starting syslogd. Clearing /tmp (X related). Starting local daemons: Welcome to FreeBSD! Please choose the appropriate terminal type for your system. Common console types are: ansi Standard ANSI terminal vt100 VT100 or compatible terminal xterm xterm terminal emulator (or compatible) cons25w cons25w terminal Console type [vt100]: