/* String search routines for XEmacs.
Copyright (C) 1985, 1986, 1987, 1992-1995 Free Software Foundation, Inc.
Copyright (C) 1995 Sun Microsystems, Inc.
Copyright (C) 2001, 2002, 2010 Ben Wing.
This file is part of XEmacs.
XEmacs is free software: you can redistribute it and/or modify it
under the terms of the GNU General Public License as published by the
Free Software Foundation, either version 3 of the License, or (at your
option) any later version.
XEmacs is distributed in the hope that it will be useful, but WITHOUT
ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
for more details.
You should have received a copy of the GNU General Public License
along with XEmacs. If not, see . */
/* Synched up with: FSF 19.29, except for region-cache stuff. */
/* Hacked on for Mule by Ben Wing, December 1994 and August 1995. */
/* This file has been Mule-ized. */
#include
#include "lisp.h"
#include "buffer.h"
#include "insdel.h"
#include "opaque.h"
#ifdef REGION_CACHE_NEEDS_WORK
#include "region-cache.h"
#endif
#include "syntax.h"
#include
#include "regex.h"
#include "casetab.h"
#include "chartab.h"
#define TRANSLATE(table, pos) \
(!NILP (table) ? TRT_TABLE_OF (table, (Ichar) pos) : pos)
#define REGEXP_CACHE_SIZE 20
#ifdef DEBUG_XEMACS
/* Used in tests/automated/case-tests.el if available. */
Fixnum debug_searches;
/* Declare as int rather than Bitflags because it's used by regex.c, which
may be used outside of XEmacs (e.g. etags.c). */
int debug_regexps;
Lisp_Object Vdebug_regexps;
Lisp_Object Qsearch_algorithm_used, Qboyer_moore, Qsimple_search;
Lisp_Object Qcompilation, Qfailure_point, Qmatching;
#endif
/* If the regexp is non-nil, then the buffer contains the compiled form
of that regexp, suitable for searching. */
struct regexp_cache
{
struct regexp_cache *next;
Lisp_Object regexp;
struct re_pattern_buffer buf;
char fastmap[0400];
/* Nonzero means regexp was compiled to do full POSIX backtracking. */
char posix;
};
/* The instances of that struct. */
static struct regexp_cache searchbufs[REGEXP_CACHE_SIZE];
/* The head of the linked list; points to the most recently used buffer. */
static struct regexp_cache *searchbuf_head;
/* Every call to re_match, etc., must pass &search_regs as the regs
argument unless you can show it is unnecessary (i.e., if re_match
is certainly going to be called again before region-around-match
can be called).
Since the registers are now dynamically allocated, we need to make
sure not to refer to the Nth register before checking that it has
been allocated by checking search_regs.num_regs.
The regex code keeps track of whether it has allocated the search
buffer using bits in the re_pattern_buffer. This means that whenever
you compile a new pattern, it completely forgets whether it has
allocated any registers, and will allocate new registers the next
time you call a searching or matching function. Therefore, we need
to call re_set_registers after compiling a new pattern or after
setting the match registers, so that the regex functions will be
able to free or re-allocate it properly. */
/* Note: things get trickier under Mule because the values returned from
the regexp routines are in Bytebpos's but we need them to be in Charbpos's.
We take the easy way out for the moment and just convert them immediately.
We could be more clever by not converting them until necessary, but
that gets real ugly real fast since the buffer might have changed and
the positions might be out of sync or out of range.
*/
static struct re_registers search_regs;
/* Every function that sets the match data _must_ clear unused search
registers on success. An unsuccessful search or match _must_ preserve
the search registers. The traditional documentation implied that
any match operation might trash the registers, but in fact failures
have always preserved the match data (in GNU Emacs as well). Some
plausible code depends on this behavior (cf. `w3-configuration-data'
in library "w3-cfg").
Ordinary string searchs use set_search_regs to set the whole-string
match. That function takes care of clearing the unused subexpression
registers.
*/
static void set_search_regs (struct buffer *buf, Charbpos beg, Charcount len);
static void clear_search_regs (void);
/* The buffer in which the last search was performed, or
Qt if the last search was done in a string;
Qnil if no searching has been done yet. */
static Lisp_Object last_thing_searched;
/* error condition signalled when regexp compile_pattern fails */
Lisp_Object Qinvalid_regexp;
/* Regular expressions used in forward/backward-word */
Lisp_Object Vforward_word_regexp, Vbackward_word_regexp;
Fixnum warn_about_possibly_incompatible_back_references;
/* range table for use with skip_chars. Only needed for Mule. */
Lisp_Object Vskip_chars_range_table;
static Charbpos simple_search (struct buffer *buf, Ibyte *base_pat,
Bytecount len, Bytebpos pos, Bytebpos lim,
EMACS_INT n, Lisp_Object trt);
static Charbpos boyer_moore (struct buffer *buf, Ibyte *base_pat,
Bytecount len, Bytebpos pos, Bytebpos lim,
EMACS_INT n, Lisp_Object trt,
Lisp_Object inverse_trt, int charset_base);
static Charbpos search_buffer (struct buffer *buf, Lisp_Object str,
Charbpos charbpos, Charbpos buflim, EMACS_INT n,
int RE, Lisp_Object trt,
Lisp_Object inverse_trt, int posix);
static DECLARE_DOESNT_RETURN (matcher_overflow (void));
static DOESNT_RETURN
matcher_overflow ()
{
stack_overflow ("Stack overflow in regexp matcher", Qunbound);
}
/* Compile a regexp and signal a Lisp error if anything goes wrong.
PATTERN is the pattern to compile.
CP is the place to put the result.
TRANSLATE is a translation table for ignoring case, or Qnil for none.
REGP is the structure that says where to store the "register"
values that will result from matching this pattern.
If it is 0, we should compile the pattern not to record any
subexpression bounds.
POSIX is nonzero if we want full backtracking (POSIX style)
for this pattern. 0 means backtrack only enough to get a valid match. */
static int
compile_pattern_1 (struct regexp_cache *cp, Lisp_Object pattern,
struct re_registers *UNUSED (regp), Lisp_Object translate,
int posix, Error_Behavior errb)
{
const char *val;
reg_syntax_t old;
cp->regexp = Qnil;
cp->buf.translate = translate;
cp->posix = posix;
old = re_set_syntax (RE_SYNTAX_EMACS
| (posix ? 0 : RE_NO_POSIX_BACKTRACKING));
val = (const char *)
re_compile_pattern ((char *) XSTRING_DATA (pattern),
XSTRING_LENGTH (pattern), &cp->buf);
re_set_syntax (old);
if (val)
{
maybe_signal_error (Qinvalid_regexp, 0, build_cistring (val),
Qsearch, errb);
return 0;
}
cp->regexp = Fcopy_sequence (pattern);
return 1;
}
/* Compile a regexp if necessary, but first check to see if there's one in
the cache.
PATTERN is the pattern to compile.
TRANSLATE is a translation table for ignoring case, or Qnil for none.
REGP is the structure that says where to store the "register"
values that will result from matching this pattern.
If it is 0, we should compile the pattern not to record any
subexpression bounds.
POSIX is nonzero if we want full backtracking (POSIX style)
for this pattern. 0 means backtrack only enough to get a valid match. */
struct re_pattern_buffer *
compile_pattern (Lisp_Object pattern, struct re_registers *regp,
Lisp_Object translate, Lisp_Object UNUSED (searchobj),
struct buffer *UNUSED (searchbuf), int posix,
Error_Behavior errb)
{
struct regexp_cache *cp, **cpp;
for (cpp = &searchbuf_head; ; cpp = &cp->next)
{
cp = *cpp;
/* &### once we fix up the fastmap code in regex.c for 8-bit-fixed,
we need to record and compare the buffer and format, since the
fastmap will reflect the state of the buffer -- and things get
more complicated if the buffer has changed formats or (esp.) has
kept the format but changed its interpretation! may need to have
the code that changes the interpretation go through and invalidate
cache entries for that buffer. */
if (!NILP (Fstring_equal (cp->regexp, pattern))
&& EQ (cp->buf.translate, translate)
&& cp->posix == posix)
break;
/* If we're at the end of the cache, compile into the last cell. */
if (cp->next == 0)
{
if (!compile_pattern_1 (cp, pattern, regp, translate,
posix, errb))
return 0;
break;
}
}
/* When we get here, cp (aka *cpp) contains the compiled pattern,
either because we found it in the cache or because we just compiled it.
Move it to the front of the queue to mark it as most recently used. */
*cpp = cp->next;
cp->next = searchbuf_head;
searchbuf_head = cp;
/* Advise the searching functions about the space we have allocated
for register data. */
if (regp)
re_set_registers (&cp->buf, regp, regp->num_regs, regp->start, regp->end);
return &cp->buf;
}
/* Error condition used for failing searches */
Lisp_Object Qsearch_failed;
static DECLARE_DOESNT_RETURN (signal_failure (Lisp_Object));
static DOESNT_RETURN
signal_failure (Lisp_Object arg)
{
for (;;)
Fsignal (Qsearch_failed, list1 (arg));
}
/* Convert the search registers from Bytebpos's to Charbpos's. Needs to be
done after each regexp match that uses the search regs.
We could get a potential speedup by not converting the search registers
until it's really necessary, e.g. when match-data or replace-match is
called. However, this complexifies the code a lot (e.g. the buffer
could have changed and the Bytebpos's stored might be invalid) and is
probably not a great time-saver. */
static void
fixup_search_regs_for_buffer (struct buffer *buf)
{
int i;
int num_regs = search_regs.num_regs;
for (i = 0; i < num_regs; i++)
{
if (search_regs.start[i] >= 0)
search_regs.start[i] = bytebpos_to_charbpos (buf,
search_regs.start[i]);
if (search_regs.end[i] >= 0)
search_regs.end[i] = bytebpos_to_charbpos (buf, search_regs.end[i]);
}
}
/* Similar but for strings. */
static void
fixup_search_regs_for_string (Lisp_Object string)
{
int i;
int num_regs = search_regs.num_regs;
/* #### bytecount_to_charcount() is not that efficient. This function
could be faster if it did its own conversion (using INC_IBYTEPTR()
and such), because the register ends are likely to be somewhat ordered.
(Even if not, you could sort them.)
Think about this if this function is a time hog, which it's probably
not. */
for (i = 0; i < num_regs; i++)
{
if (search_regs.start[i] > 0)
{
search_regs.start[i] =
string_index_byte_to_char (string, search_regs.start[i]);
}
if (search_regs.end[i] > 0)
{
search_regs.end[i] =
string_index_byte_to_char (string, search_regs.end[i]);
}
}
}
static Lisp_Object
looking_at_1 (Lisp_Object string, struct buffer *buf, int posix)
{
Lisp_Object val;
Bytebpos p1, p2;
Bytecount s1, s2;
REGISTER int i;
struct re_pattern_buffer *bufp;
struct syntax_cache scache_struct;
struct syntax_cache *scache = &scache_struct;
CHECK_STRING (string);
bufp = compile_pattern (string, &search_regs,
(!NILP (buf->case_fold_search)
? XCASE_TABLE_DOWNCASE (buf->case_table) : Qnil),
wrap_buffer (buf), buf, posix, ERROR_ME);
QUIT;
/* Get pointers and sizes of the two strings
that make up the visible portion of the buffer. */
p1 = BYTE_BUF_BEGV (buf);
p2 = BYTE_BUF_CEILING_OF (buf, p1);
s1 = p2 - p1;
s2 = BYTE_BUF_ZV (buf) - p2;
/* By making the regex object, regex buffer, and syntax cache arguments
to re_{search,match}{,_2}, we've removed the need to do nasty things
to deal with regex reentrancy. (See stack trace in signal.c for proof
that this can happen.)
#### there is still a potential problem with the regex cache --
the compiled regex could be overwritten. we'd need 20-fold
reentrancy, though. Fix this. */
i = re_match_2 (bufp, (char *) BYTE_BUF_BYTE_ADDRESS (buf, p1),
s1, (char *) BYTE_BUF_BYTE_ADDRESS (buf, p2), s2,
BYTE_BUF_PT (buf) - BYTE_BUF_BEGV (buf), &search_regs,
BYTE_BUF_ZV (buf) - BYTE_BUF_BEGV (buf), wrap_buffer (buf),
buf, scache);
if (i == -2)
matcher_overflow ();
val = (0 <= i ? Qt : Qnil);
if (NILP (val))
return Qnil;
{
int num_regs = search_regs.num_regs;
for (i = 0; i < num_regs; i++)
if (search_regs.start[i] >= 0)
{
search_regs.start[i] += BYTE_BUF_BEGV (buf);
search_regs.end[i] += BYTE_BUF_BEGV (buf);
}
}
last_thing_searched = wrap_buffer (buf);
fixup_search_regs_for_buffer (buf);
return val;
}
DEFUN ("looking-at", Flooking_at, 1, 2, 0, /*
Return t if text after point matches regular expression REGEXP.
When the match is successful, this function modifies the match data
that `match-beginning', `match-end' and `match-data' access; save the
match data with `match-data' and restore it with `store-match-data' if
you want to preserve them. If the match fails, the match data from the
previous success match is preserved.
Optional argument BUFFER defaults to the current buffer.
*/
(regexp, buffer))
{
return looking_at_1 (regexp, decode_buffer (buffer, 0), 0);
}
DEFUN ("posix-looking-at", Fposix_looking_at, 1, 2, 0, /*
Return t if text after point matches regular expression REGEXP.
Find the longest match, in accord with Posix regular expression rules.
When the match is successful, this function modifies the match data
that `match-beginning', `match-end' and `match-data' access; save the
match data with `match-data' and restore it with `store-match-data' if
you want to preserve them. If the match fails, the match data from the
previous success match is preserved.
Optional argument BUFFER defaults to the current buffer.
*/
(regexp, buffer))
{
return looking_at_1 (regexp, decode_buffer (buffer, 0), 1);
}
static Lisp_Object
string_match_1 (Lisp_Object regexp, Lisp_Object string, Lisp_Object start,
struct buffer *buf, int posix)
{
Bytecount val;
Charcount s;
struct re_pattern_buffer *bufp;
/* Some FSF junk with running_asynch_code, to preserve the match
data. Not necessary because we don't call process filters
asynchronously (i.e. from within QUIT). */
CHECK_STRING (regexp);
CHECK_STRING (string);
if (NILP (start))
s = 0;
else
{
Charcount len = string_char_length (string);
CHECK_FIXNUM (start);
s = XFIXNUM (start);
if (s < 0 && -s <= len)
s = len + s;
else if (0 > s || s > len)
args_out_of_range (string, start);
}
bufp = compile_pattern (regexp, &search_regs,
(!NILP (buf->case_fold_search)
? XCASE_TABLE_DOWNCASE (buf->case_table) : Qnil),
string, buf, posix, ERROR_ME);
QUIT;
{
Bytecount bis = string_index_char_to_byte (string, s);
struct syntax_cache scache_struct;
struct syntax_cache *scache = &scache_struct;
/* By making the regex object, regex buffer, and syntax cache arguments
to re_{search,match}{,_2}, we've removed the need to do nasty things
to deal with regex reentrancy. (See stack trace in signal.c for proof
that this can happen.)
#### there is still a potential problem with the regex cache --
the compiled regex could be overwritten. we'd need 20-fold
reentrancy, though. Fix this. */
val = re_search (bufp, (char *) XSTRING_DATA (string),
XSTRING_LENGTH (string), bis,
XSTRING_LENGTH (string) - bis,
&search_regs, string, buf, scache);
}
if (val == -2)
matcher_overflow ();
if (val < 0) return Qnil;
last_thing_searched = Qt;
fixup_search_regs_for_string (string);
return make_fixnum (string_index_byte_to_char (string, val));
}
DEFUN ("string-match", Fstring_match, 2, 4, 0, /*
Return index of start of first match for REGEXP in STRING, or nil.
If third arg START is non-nil, start search at that index in STRING.
For index of first char beyond the match, do (match-end 0).
`match-end' and `match-beginning' also give indices of substrings
matched by parenthesis constructs in the pattern.
Optional arg BUFFER controls how case folding and syntax and category
lookup is done (according to the value of `case-fold-search' in that buffer
and that buffer's case tables, syntax tables, and category table). If nil
or unspecified, it defaults *NOT* to the current buffer but instead:
-- the value of `case-fold-search' in the current buffer is still respected
because of idioms like
(let ((case-fold-search nil))
(string-match "^foo.*bar" string))
but the case, syntax, and category tables come from the standard tables,
which are accessed through functions `default-{case,syntax,category}-table'
and serve as the parents of the tables in particular buffer.
When the match is successful, this function modifies the match data
that `match-beginning', `match-end' and `match-data' access; save the
match data with `match-data' and restore it with `store-match-data' if
you want to preserve them. If the match fails, the match data from the
previous success match is preserved.
*/
(regexp, string, start, buffer))
{
/* &### implement new interp for buffer arg; check code to see if it
makes more sense than prev */
return string_match_1 (regexp, string, start, decode_buffer (buffer, 0), 0);
}
DEFUN ("posix-string-match", Fposix_string_match, 2, 4, 0, /*
Return index of start of first match for REGEXP in STRING, or nil.
Find the longest match, in accord with Posix regular expression rules.
If third arg START is non-nil, start search at that index in STRING.
For index of first char beyond the match, do (match-end 0).
`match-end' and `match-beginning' also give indices of substrings
matched by parenthesis constructs in the pattern.
Optional arg BUFFER controls how case folding is done (according to
the value of `case-fold-search' in that buffer and that buffer's case
tables) and defaults to the current buffer.
When the match is successful, this function modifies the match data
that `match-beginning', `match-end' and `match-data' access; save the
match data with `match-data' and restore it with `store-match-data' if
you want to preserve them. If the match fails, the match data from the
previous success match is preserved.
*/
(regexp, string, start, buffer))
{
return string_match_1 (regexp, string, start, decode_buffer (buffer, 0), 1);
}
/* Match REGEXP against STRING, searching all of STRING,
and return the index of the match, or negative on failure.
This does not clobber the match data. */
Bytecount
fast_string_match (Lisp_Object regexp, const Ibyte *nonreloc,
Lisp_Object reloc, Bytecount offset,
Bytecount length, int case_fold_search,
Error_Behavior errb, int no_quit)
{
Bytecount val;
Ibyte *newnonreloc = (Ibyte *) nonreloc;
struct re_pattern_buffer *bufp;
struct syntax_cache scache_struct;
struct syntax_cache *scache = &scache_struct;
bufp = compile_pattern (regexp, 0,
(case_fold_search
? XCASE_TABLE_DOWNCASE (Vstandard_case_table)
: Qnil),
reloc, 0, 0, errb);
if (!bufp)
return -1; /* will only do this when errb != ERROR_ME */
if (!no_quit)
QUIT;
else
no_quit_in_re_search = 1;
fixup_internal_substring (nonreloc, reloc, offset, &length);
/* Don't need to protect against GC inside of re_search() due to QUIT;
QUIT is GC-inhibited. */
if (!NILP (reloc))
newnonreloc = XSTRING_DATA (reloc);
/* By making the regex object, regex buffer, and syntax cache arguments
to re_{search,match}{,_2}, we've removed the need to do nasty things
to deal with regex reentrancy. (See stack trace in signal.c for proof
that this can happen.)
#### there is still a potential problem with the regex cache --
the compiled regex could be overwritten. we'd need 20-fold
reentrancy, though. Fix this. */
val = re_search (bufp, (char *) newnonreloc + offset, length, 0,
length, 0, reloc, 0, scache);
no_quit_in_re_search = 0;
return val;
}
Bytecount
fast_lisp_string_match (Lisp_Object regex, Lisp_Object string)
{
return fast_string_match (regex, 0, string, 0, -1, 0, ERROR_ME, 0);
}
#ifdef REGION_CACHE_NEEDS_WORK
/* The newline cache: remembering which sections of text have no newlines. */
/* If the user has requested newline caching, make sure it's on.
Otherwise, make sure it's off.
This is our cheezy way of associating an action with the change of
state of a buffer-local variable. */
static void
newline_cache_on_off (struct buffer *buf)
{
if (NILP (buf->cache_long_line_scans))
{
/* It should be off. */
if (buf->newline_cache)
{
free_region_cache (buf->newline_cache);
buf->newline_cache = 0;
}
}
else
{
/* It should be on. */
if (buf->newline_cache == 0)
buf->newline_cache = new_region_cache ();
}
}
#endif
/* Search in BUF for COUNT instances of the character TARGET between
START and END.
If COUNT is positive, search forwards; END must be >= START.
If COUNT is negative, search backwards for the -COUNTth instance;
END must be <= START.
If COUNT is zero, do anything you please; run rogue, for all I care.
If END is zero, use BEGV or ZV instead, as appropriate for the
direction indicated by COUNT.
If we find COUNT instances, set *SHORTAGE to zero, and return the
position after the COUNTth match. Note that for reverse motion
this is not the same as the usual convention for Emacs motion commands.
If we don't find COUNT instances before reaching END, set *SHORTAGE
to the number of TARGETs left unfound, and return END.
If ALLOW_QUIT is non-zero, call QUIT periodically. */
static Bytebpos
byte_scan_buffer (struct buffer *buf, Ichar target, Bytebpos st, Bytebpos en,
EMACS_INT count, EMACS_INT *shortage, int allow_quit)
{
Bytebpos lim = en > 0 ? en :
((count > 0) ? BYTE_BUF_ZV (buf) : BYTE_BUF_BEGV (buf));
/* #### newline cache stuff in this function not yet ported */
assert (count != 0);
if (shortage)
*shortage = 0;
if (count > 0)
{
#ifdef MULE
Internal_Format fmt = buf->text->format;
/* Check for char that's unrepresentable in the buffer -- it
certainly can't be there. */
if (!ichar_fits_in_format (target, fmt, wrap_buffer (buf)))
{
*shortage = count;
return lim;
}
/* Due to the Mule representation of characters in a buffer, we can
simply search for characters in the range 0 - 127 directly; for
8-bit-fixed, we can do this for all characters. In other cases,
we do it the "hard" way. Note that this way works for all
characters and all formats, but the other way is faster. */
else if (! (fmt == FORMAT_8_BIT_FIXED ||
(fmt == FORMAT_DEFAULT && ichar_ascii_p (target))))
{
Raw_Ichar raw = ichar_to_raw (target, fmt, wrap_buffer (buf));
while (st < lim && count > 0)
{
if (BYTE_BUF_FETCH_CHAR_RAW (buf, st) == raw)
count--;
INC_BYTEBPOS (buf, st);
}
}
else
#endif
{
Raw_Ichar raw = ichar_to_raw (target, fmt, wrap_buffer (buf));
while (st < lim && count > 0)
{
Bytebpos ceiling;
Ibyte *bufptr;
ceiling = BYTE_BUF_CEILING_OF (buf, st);
ceiling = min (lim, ceiling);
bufptr = (Ibyte *) memchr (BYTE_BUF_BYTE_ADDRESS (buf, st),
raw, ceiling - st);
if (bufptr)
{
count--;
st = BYTE_BUF_PTR_BYTE_POS (buf, bufptr) + 1;
}
else
st = ceiling;
}
}
if (shortage)
*shortage = count;
if (allow_quit)
QUIT;
return st;
}
else
{
#ifdef MULE
Internal_Format fmt = buf->text->format;
/* Check for char that's unrepresentable in the buffer -- it
certainly can't be there. */
if (!ichar_fits_in_format (target, fmt, wrap_buffer (buf)))
{
*shortage = -count;
return lim;
}
else if (! (fmt == FORMAT_8_BIT_FIXED ||
(fmt == FORMAT_DEFAULT && ichar_ascii_p (target))))
{
Raw_Ichar raw = ichar_to_raw (target, fmt, wrap_buffer (buf));
while (st > lim && count < 0)
{
DEC_BYTEBPOS (buf, st);
if (BYTE_BUF_FETCH_CHAR_RAW (buf, st) == raw)
count++;
}
}
else
#endif
{
Raw_Ichar raw = ichar_to_raw (target, fmt, wrap_buffer (buf));
while (st > lim && count < 0)
{
Bytebpos floorpos;
Ibyte *bufptr;
Ibyte *floorptr;
floorpos = BYTE_BUF_FLOOR_OF (buf, st);
floorpos = max (lim, floorpos);
/* No memrchr() ... */
bufptr = BYTE_BUF_BYTE_ADDRESS_BEFORE (buf, st);
floorptr = BYTE_BUF_BYTE_ADDRESS (buf, floorpos);
while (bufptr >= floorptr)
{
st--;
/* At this point, both ST and BUFPTR refer to the same
character. When the loop terminates, ST will
always point to the last character we tried. */
if (*bufptr == (Ibyte) raw)
{
count++;
break;
}
bufptr--;
}
}
}
if (shortage)
*shortage = -count;
if (allow_quit)
QUIT;
if (count)
return st;
else
{
/* We found the character we were looking for; we have to return
the position *after* it due to the strange way that the return
value is defined. */
INC_BYTEBPOS (buf, st);
return st;
}
}
}
Charbpos
scan_buffer (struct buffer *buf, Ichar target, Charbpos start, Charbpos end,
EMACS_INT count, EMACS_INT *shortage, int allow_quit)
{
Bytebpos byte_retval;
Bytebpos byte_start, byte_end;
byte_start = charbpos_to_bytebpos (buf, start);
if (end)
byte_end = charbpos_to_bytebpos (buf, end);
else
byte_end = 0;
byte_retval = byte_scan_buffer (buf, target, byte_start, byte_end, count,
shortage, allow_quit);
return bytebpos_to_charbpos (buf, byte_retval);
}
Bytebpos
byte_find_next_newline_no_quit (struct buffer *buf, Bytebpos from, int count)
{
return byte_scan_buffer (buf, '\n', from, 0, count, 0, 0);
}
Charbpos
find_next_newline_no_quit (struct buffer *buf, Charbpos from, int count)
{
return scan_buffer (buf, '\n', from, 0, count, 0, 0);
}
Charbpos
find_next_newline (struct buffer *buf, Charbpos from, int count)
{
return scan_buffer (buf, '\n', from, 0, count, 0, 1);
}
Bytecount
byte_find_next_ichar_in_string (Lisp_Object str, Ichar target, Bytecount st,
EMACS_INT count)
{
Bytebpos lim = XSTRING_LENGTH (str) -1;
Ibyte *s = XSTRING_DATA (str);
assert (count >= 0);
#ifdef MULE
/* Due to the Mule representation of characters in a buffer,
we can simply search for characters in the range 0 - 127
directly. For other characters, we do it the "hard" way.
Note that this way works for all characters but the other
way is faster. */
if (target >= 0200)
{
while (st < lim && count > 0)
{
if (string_ichar (str, st) == target)
count--;
INC_BYTECOUNT (s, st);
}
}
else
#endif
{
while (st < lim && count > 0)
{
Ibyte *bufptr = (Ibyte *) memchr (itext_n_addr (s, st),
(int) target, lim - st);
if (bufptr)
{
count--;
st = (Bytebpos) (bufptr - s) + 1;
}
else
st = lim;
}
}
return st;
}
/* Like find_next_newline, but returns position before the newline,
not after, and only search up to TO. This isn't just
find_next_newline (...)-1, because you might hit TO. */
Charbpos
find_before_next_newline (struct buffer *buf, Charbpos from, Charbpos to,
int count)
{
EMACS_INT shortage;
Charbpos pos = scan_buffer (buf, '\n', from, to, count, &shortage, 1);
if (shortage == 0)
pos--;
return pos;
}
/* This function synched with FSF 21.1 */
static Lisp_Object
skip_chars (struct buffer *buf, int forwardp, int syntaxp,
Lisp_Object string, Lisp_Object lim)
{
REGISTER Ibyte *p, *pend;
REGISTER Ichar c;
/* We store the first 256 chars in an array here and the rest in
a range table. */
unsigned char fastmap[0400];
int negate = 0;
Charbpos limit;
struct syntax_cache *scache;
Bitbyte class_bits = 0;
if (NILP (lim))
limit = forwardp ? BUF_ZV (buf) : BUF_BEGV (buf);
else
{
CHECK_FIXNUM_COERCE_MARKER (lim);
limit = XFIXNUM (lim);
/* In any case, don't allow scan outside bounds of buffer. */
if (limit > BUF_ZV (buf)) limit = BUF_ZV (buf);
if (limit < BUF_BEGV (buf)) limit = BUF_BEGV (buf);
}
CHECK_STRING (string);
p = XSTRING_DATA (string);
pend = p + XSTRING_LENGTH (string);
memset (fastmap, 0, sizeof (fastmap));
Fclear_range_table (Vskip_chars_range_table);
if (p != pend && *p == '^')
{
negate = 1;
p++;
}
/* Find the characters specified and set their elements of fastmap.
If syntaxp, each character counts as itself.
Otherwise, handle backslashes and ranges specially */
while (p != pend)
{
c = itext_ichar (p);
INC_IBYTEPTR (p);
if (syntaxp)
{
if (c < 0200 && syntax_spec_code[c] < (unsigned char) Smax)
fastmap[c] = 1;
else
invalid_argument ("Invalid syntax designator", make_char (c));
}
else
{
if (c == '\\')
{
if (p == pend) break;
c = itext_ichar (p);
INC_IBYTEPTR (p);
}
if (p != pend && *p == '-')
{
Ichar cend;
/* Skip over the dash. */
p++;
if (p == pend) break;
cend = itext_ichar (p);
while (c <= cend && c < 0400)
{
fastmap[c] = 1;
c++;
}
if (c <= cend)
Fput_range_table (make_fixnum (c), make_fixnum (cend), Qt,
Vskip_chars_range_table);
INC_IBYTEPTR (p);
}
else if ('[' == c && p != pend && *p == ':')
{
Ibyte *colonp;
Extbyte *classname;
int ch = 0;
re_wctype_t cc;
INC_IBYTEPTR (p);
if (p == pend)
{
fastmap ['['] = fastmap[':'] = 1;
break;
}
colonp = (Ibyte *) memchr (p, ':', pend - p);
if (NULL == colonp || (colonp + 1) == pend || colonp[1] != ']')
{
fastmap ['['] = fastmap[':'] = 1;
continue;
}
classname = alloca_extbytes (colonp - p + 1);
memmove (classname, p, colonp - p);
classname[colonp - p] = '\0';
cc = re_wctype (classname);
if (cc == RECC_ERROR)
{
invalid_argument ("Invalid character class",
build_extstring (classname, Qbinary));
}
for (ch = 0; ch < countof (fastmap); ++ch)
{
if (re_iswctype (ch, cc, buf))
{
fastmap[ch] = 1;
}
}
compile_char_class (cc, Vskip_chars_range_table, &class_bits);
p = colonp + 2;
}
else
{
if (c < 0400)
fastmap[c] = 1;
else
Fput_range_table (make_fixnum (c), make_fixnum (c), Qt,
Vskip_chars_range_table);
}
}
}
/* #### Not in FSF 21.1 */
if (syntaxp && fastmap['-'] != 0)
fastmap[' '] = 1;
{
Charbpos start_point = BUF_PT (buf);
Charbpos pos = start_point;
Charbpos pos_byte = BYTE_BUF_PT (buf);
if (syntaxp)
{
scache = setup_buffer_syntax_cache (buf, pos, forwardp ? 1 : -1);
/* All syntax designators are normal chars so nothing strange
to worry about */
if (forwardp)
{
if (pos < limit)
while (fastmap[(unsigned char)
syntax_code_spec
[(int) SYNTAX_FROM_CACHE
(scache, BYTE_BUF_FETCH_CHAR (buf, pos_byte))]]
!= negate)
{
pos++;
INC_BYTEBPOS (buf, pos_byte);
if (pos >= limit)
break;
UPDATE_SYNTAX_CACHE_FORWARD (scache, pos);
}
}
else
{
while (pos > limit)
{
Charbpos savepos = pos_byte;
pos--;
DEC_BYTEBPOS (buf, pos_byte);
UPDATE_SYNTAX_CACHE_BACKWARD (scache, pos);
if (fastmap[(unsigned char)
syntax_code_spec
[(int) SYNTAX_FROM_CACHE
(scache, BYTE_BUF_FETCH_CHAR (buf, pos_byte))]]
== negate)
{
pos++;
pos_byte = savepos;
break;
}
}
}
}
else
{
struct buffer *lispbuf = buf;
#define CLASS_BIT_CHECK(c) \
(class_bits && ((class_bits & BIT_ALPHA && ISALPHA (c)) \
|| (class_bits & BIT_SPACE && ISSPACE (c)) \
|| (class_bits & BIT_PUNCT && ISPUNCT (c)) \
|| (class_bits & BIT_WORD && ISWORD (c)) \
|| (NILP (buf->case_fold_search) ? \
((class_bits & BIT_UPPER && ISUPPER (c)) \
|| (class_bits & BIT_LOWER && ISLOWER (c))) \
: (class_bits & (BIT_UPPER | BIT_LOWER) \
&& !NOCASEP (buf, c)))))
if (forwardp)
{
while (pos < limit)
{
Ichar ch = BYTE_BUF_FETCH_CHAR (buf, pos_byte);
if ((ch < countof (fastmap) ? fastmap[ch]
: (CLASS_BIT_CHECK (ch) ||
(EQ (Qt, Fget_range_table (make_fixnum (ch),
Vskip_chars_range_table,
Qnil)))))
!= negate)
{
pos++;
INC_BYTEBPOS (buf, pos_byte);
}
else
break;
}
}
else
{
while (pos > limit)
{
Charbpos prev_pos_byte = pos_byte;
Ichar ch;
DEC_BYTEBPOS (buf, prev_pos_byte);
ch = BYTE_BUF_FETCH_CHAR (buf, prev_pos_byte);
if ((ch < countof (fastmap) ? fastmap[ch]
: (CLASS_BIT_CHECK (ch) ||
(EQ (Qt, Fget_range_table (make_fixnum (ch),
Vskip_chars_range_table,
Qnil)))))
!= negate)
{
pos--;
pos_byte = prev_pos_byte;
}
else
break;
}
}
}
QUIT;
BOTH_BUF_SET_PT (buf, pos, pos_byte);
return make_fixnum (BUF_PT (buf) - start_point);
}
}
DEFUN ("skip-chars-forward", Fskip_chars_forward, 1, 3, 0, /*
Move point forward, stopping before a char not in STRING, or at pos LIMIT.
STRING is like the inside of a `[...]' in a regular expression
except that `]' is never special and `\\' quotes `^', `-' or `\\'.
Thus, with arg "a-zA-Z", this skips letters stopping before first nonletter.
With arg "^a-zA-Z", skips nonletters stopping before first letter.
Returns the distance traveled, either zero or positive.
Optional argument BUFFER defaults to the current buffer.
*/
(string, limit, buffer))
{
return skip_chars (decode_buffer (buffer, 0), 1, 0, string, limit);
}
DEFUN ("skip-chars-backward", Fskip_chars_backward, 1, 3, 0, /*
Move point backward, stopping after a char not in STRING, or at pos LIMIT.
See `skip-chars-forward' for details.
Returns the distance traveled, either zero or negative.
Optional argument BUFFER defaults to the current buffer.
*/
(string, limit, buffer))
{
return skip_chars (decode_buffer (buffer, 0), 0, 0, string, limit);
}
DEFUN ("skip-syntax-forward", Fskip_syntax_forward, 1, 3, 0, /*
Move point forward across chars in specified syntax classes.
SYNTAX is a string of syntax code characters.
Stop before a char whose syntax is not in SYNTAX, or at position LIMIT.
If SYNTAX starts with ^, skip characters whose syntax is NOT in SYNTAX.
This function returns the distance traveled, either zero or positive.
Optional argument BUFFER defaults to the current buffer.
*/
(syntax, limit, buffer))
{
return skip_chars (decode_buffer (buffer, 0), 1, 1, syntax, limit);
}
DEFUN ("skip-syntax-backward", Fskip_syntax_backward, 1, 3, 0, /*
Move point backward across chars in specified syntax classes.
SYNTAX is a string of syntax code characters.
Stop on reaching a char whose syntax is not in SYNTAX, or at position LIMIT.
If SYNTAX starts with ^, skip characters whose syntax is NOT in SYNTAX.
This function returns the distance traveled, either zero or negative.
Optional argument BUFFER defaults to the current buffer.
*/
(syntax, limit, buffer))
{
return skip_chars (decode_buffer (buffer, 0), 0, 1, syntax, limit);
}
/* Subroutines of Lisp buffer search functions. */
static Lisp_Object
search_command (Lisp_Object string, Lisp_Object limit, Lisp_Object noerror,
Lisp_Object count, Lisp_Object buffer, int direction,
int RE, int posix)
{
REGISTER Charbpos np;
Charbpos lim;
EMACS_INT n = direction;
struct buffer *buf;
if (!NILP (count))
{
CHECK_FIXNUM (count);
n *= XFIXNUM (count);
}
buf = decode_buffer (buffer, 0);
CHECK_STRING (string);
if (NILP (limit))
lim = n > 0 ? BUF_ZV (buf) : BUF_BEGV (buf);
else
{
CHECK_FIXNUM_COERCE_MARKER (limit);
lim = XFIXNUM (limit);
if (n > 0 ? lim < BUF_PT (buf) : lim > BUF_PT (buf))
invalid_argument ("Invalid search limit (wrong side of point)",
Qunbound);
if (lim > BUF_ZV (buf))
lim = BUF_ZV (buf);
if (lim < BUF_BEGV (buf))
lim = BUF_BEGV (buf);
}
np = search_buffer (buf, string, BUF_PT (buf), lim, n, RE,
(!NILP (buf->case_fold_search)
? XCASE_TABLE_CANON (buf->case_table)
: Qnil),
(!NILP (buf->case_fold_search)
? XCASE_TABLE_EQV (buf->case_table)
: Qnil), posix);
if (np <= 0)
{
if (NILP (noerror))
{
signal_failure (string);
RETURN_NOT_REACHED (Qnil);
}
if (!EQ (noerror, Qt))
{
if (lim < BUF_BEGV (buf) || lim > BUF_ZV (buf))
ABORT ();
BUF_SET_PT (buf, lim);
return Qnil;
#if 0 /* This would be clean, but maybe programs depend on
a value of nil here. */
np = lim;
#endif
}
else
return Qnil;
}
if (np < BUF_BEGV (buf) || np > BUF_ZV (buf))
ABORT ();
BUF_SET_PT (buf, np);
return make_fixnum (np);
}
static int
trivial_regexp_p (Lisp_Object regexp)
{
Bytecount len = XSTRING_LENGTH (regexp);
Ibyte *s = XSTRING_DATA (regexp);
while (--len >= 0)
{
switch (*s++)
{
/* #### howcum ']' doesn't appear here, but ... */
case '.': case '*': case '+': case '?': case '[': case '^': case '$':
return 0;
case '\\':
if (--len < 0)
return 0;
switch (*s++)
{
/* ... ')' does appear here? ('<' and '>' can appear singly.) */
/* #### are there other constructs to check? */
case '|': case '(': case ')': case '`': case '\'': case 'b':
case 'B': case '<': case '>': case 'w': case 'W': case 's':
case 'S': case '=': case '{': case '}':
#ifdef MULE
/* 97/2/25 jhod Added for category matches */
case 'c': case 'C':
#endif /* MULE */
case '1': case '2': case '3': case '4': case '5':
case '6': case '7': case '8': case '9':
return 0;
}
}
}
return 1;
}
/* Search for the n'th occurrence of STRING in BUF,
starting at position CHARBPOS and stopping at position BUFLIM,
treating PAT as a literal string if RE is false or as
a regular expression if RE is true.
If N is positive, searching is forward and BUFLIM must be greater
than CHARBPOS.
If N is negative, searching is backward and BUFLIM must be less
than CHARBPOS.
Returns -x if only N-x occurrences found (x > 0),
or else the position at the beginning of the Nth occurrence
(if searching backward) or the end (if searching forward).
POSIX is nonzero if we want full backtracking (POSIX style)
for this pattern. 0 means backtrack only enough to get a valid match. */
static Charbpos
search_buffer (struct buffer *buf, Lisp_Object string, Charbpos charbpos,
Charbpos buflim, EMACS_INT n, int RE, Lisp_Object trt,
Lisp_Object inverse_trt, int posix)
{
Bytecount len = XSTRING_LENGTH (string);
Ibyte *base_pat = XSTRING_DATA (string);
REGISTER EMACS_INT i, j;
Bytebpos p1, p2;
Bytecount s1, s2;
Bytebpos pos, lim;
/* Some FSF junk with running_asynch_code, to preserve the match
data. Not necessary because we don't call process filters
asynchronously (i.e. from within QUIT). */
/* Searching 0 times means noop---don't move, don't touch registers. */
if (n == 0)
return charbpos;
/* Null string is found at starting position. */
if (len == 0)
{
set_search_regs (buf, charbpos, 0);
return charbpos;
}
pos = charbpos_to_bytebpos (buf, charbpos);
lim = charbpos_to_bytebpos (buf, buflim);
if (RE && !trivial_regexp_p (string))
{
struct re_pattern_buffer *bufp;
bufp = compile_pattern (string, &search_regs, trt,
wrap_buffer (buf), buf, posix, ERROR_ME);
/* Get pointers and sizes of the two strings
that make up the visible portion of the buffer. */
p1 = BYTE_BUF_BEGV (buf);
p2 = BYTE_BUF_CEILING_OF (buf, p1);
s1 = p2 - p1;
s2 = BYTE_BUF_ZV (buf) - p2;
while (n != 0)
{
Bytecount val;
struct syntax_cache scache_struct;
struct syntax_cache *scache = &scache_struct;
QUIT;
/* By making the regex object, regex buffer, and syntax cache
arguments to re_{search,match}{,_2}, we've removed the need to
do nasty things to deal with regex reentrancy. (See stack
trace in signal.c for proof that this can happen.)
#### there is still a potential problem with the regex cache --
the compiled regex could be overwritten. we'd need 20-fold
reentrancy, though. Fix this. */
val = re_search_2 (bufp,
(char *) BYTE_BUF_BYTE_ADDRESS (buf, p1), s1,
(char *) BYTE_BUF_BYTE_ADDRESS (buf, p2), s2,
pos - BYTE_BUF_BEGV (buf), lim - pos, &search_regs,
n > 0 ? lim - BYTE_BUF_BEGV (buf) :
pos - BYTE_BUF_BEGV (buf), wrap_buffer (buf),
buf, scache);
if (val == -2)
{
matcher_overflow ();
}
if (val >= 0)
{
int num_regs = search_regs.num_regs;
j = BYTE_BUF_BEGV (buf);
for (i = 0; i < num_regs; i++)
if (search_regs.start[i] >= 0)
{
search_regs.start[i] += j;
search_regs.end[i] += j;
}
last_thing_searched = wrap_buffer (buf);
/* Set pos to the new position. */
pos = n > 0 ? search_regs.end[0] : search_regs.start[0];
fixup_search_regs_for_buffer (buf);
/* And charbpos too. */
charbpos = n > 0 ? search_regs.end[0] : search_regs.start[0];
}
else
return (n > 0 ? 0 - n : n);
if (n > 0) n--; else n++;
}
return charbpos;
}
else /* non-RE case */
{
int charset_base = -1;
int boyer_moore_ok = 1;
Ibyte *patbuf = alloca_ibytes (len * MAX_ICHAR_LEN);
Ibyte *pat = patbuf;
#ifdef MULE
int entirely_one_byte_p = buf->text->entirely_one_byte_p;
int nothing_greater_than_0xff =
buf->text->num_8_bit_fixed_chars == BUF_Z(buf) - BUF_BEG (buf);
while (len > 0)
{
Ibyte tmp_str[MAX_ICHAR_LEN];
Ichar c, translated, inverse;
Bytecount orig_bytelen, new_bytelen, inv_bytelen;
/* If we got here and the RE flag is set, it's because
we're dealing with a regexp known to be trivial, so the
backslash just quotes the next character. */
if (RE && *base_pat == '\\')
{
len--;
base_pat++;
}
c = itext_ichar (base_pat);
translated = TRANSLATE (trt, c);
inverse = TRANSLATE (inverse_trt, c);
orig_bytelen = itext_ichar_len (base_pat);
inv_bytelen = set_itext_ichar (tmp_str, inverse);
new_bytelen = set_itext_ichar (tmp_str, translated);
if (boyer_moore_ok
/* Only do the Boyer-Moore check for characters needing
translation. */
&& (translated != c || inverse != c))
{
Ichar starting_c = c;
int charset_base_code, checked = 0;
do
{
c = TRANSLATE (inverse_trt, c);
/* If a character cannot occur in the buffer, ignore
it. */
if (c > 0x7F && entirely_one_byte_p)
continue;
if (c > 0xFF && nothing_greater_than_0xff)
continue;
checked = 1;
if (-1 == charset_base) /* No charset yet specified. */
{
/* Keep track of which charset and character set row
contains the characters that need translation.
Zero out the bits corresponding to the last
byte. */
charset_base = c & ~ICHAR_FIELD3_MASK;
}
else
{
charset_base_code = c & ~ICHAR_FIELD3_MASK;
if (charset_base_code != charset_base)
{
/* If two different rows, or two different
charsets, appear, needing non-ASCII
translation, then we cannot use boyer_moore
search. See the comment at the head of
boyer_moore(). */
boyer_moore_ok = 0;
break;
}
}
if (ichar_len (c) > 2)
{
/* Case-equivalence plus repeated octets throws off
the construction of the stride table; avoid this.
It should be possible to correct boyer_moore to
behave correctly even in this case--it doesn't have
problems with repeated octets when case conversion
is not involved--but this is not a critical
issue. */
Ibyte encoded[MAX_ICHAR_LEN];
Bytecount clen = set_itext_ichar (encoded, c);
int a, b;
for (a = 0; a < clen && boyer_moore_ok; ++a)
{
for (b = a + 1; b < clen && boyer_moore_ok; ++b)
{
if (encoded[a] == encoded[b])
{
boyer_moore_ok = 0;
}
}
}
if (0 == boyer_moore_ok)
{
break;
}
}
} while (c != starting_c);
if (!checked)
{
#ifdef DEBUG_XEMACS
if (debug_searches)
{
Lisp_Symbol *sym = XSYMBOL (Qsearch_algorithm_used);
sym->value = Qnil;
}
#endif
/* The "continue" clauses were used above, for every
translation of the character. As such, this character
is not to be found in the buffer and neither is the
string as a whole. Return immediately; also avoid
triggering the assertion a few lines down. */
return n > 0 ? -n : n;
}
if (boyer_moore_ok && charset_base != -1 &&
charset_base != (translated & ~ICHAR_FIELD3_MASK))
{
/* In the rare event that the CANON entry for this
character is not in the desired set, choose one
that is, from the equivalence set. It doesn't much
matter which. */
Ichar starting_ch = translated;
do
{
translated = TRANSLATE (inverse_trt, translated);
if (charset_base == (translated & ~ICHAR_FIELD3_MASK))
break;
} while (starting_ch != translated);
assert (starting_ch != translated);
new_bytelen = set_itext_ichar (tmp_str, translated);
}
}
memcpy (pat, tmp_str, new_bytelen);
pat += new_bytelen;
base_pat += orig_bytelen;
len -= orig_bytelen;
}
if (-1 == charset_base)
{
charset_base = 'a' & ~ICHAR_FIELD3_MASK; /* Default to ASCII. */
}
#else /* not MULE */
while (--len >= 0)
{
/* If we got here and the RE flag is set, it's because
we're dealing with a regexp known to be trivial, so the
backslash just quotes the next character. */
if (RE && *base_pat == '\\')
{
len--;
base_pat++;
}
*pat++ = TRANSLATE (trt, *base_pat++);
}
#endif /* MULE */
len = pat - patbuf;
pat = base_pat = patbuf;
#ifdef DEBUG_XEMACS
if (debug_searches)
{
Lisp_Symbol *sym = XSYMBOL (Qsearch_algorithm_used);
sym->value = boyer_moore_ok ? Qboyer_moore : Qsimple_search;
}
#endif
if (boyer_moore_ok)
return boyer_moore (buf, base_pat, len, pos, lim, n,
trt, inverse_trt, charset_base);
else
return simple_search (buf, base_pat, len, pos, lim, n, trt);
}
}
/* Do a simple string search N times for the string PAT, whose length is
LEN/LEN_BYTE, from buffer position POS until LIM. TRT is the
translation table.
Return the character position where the match is found.
Otherwise, if M matches remained to be found, return -M.
This kind of search works regardless of what is in PAT and
regardless of what is in TRT. It is used in cases where
boyer_moore cannot work. */
static Charbpos
simple_search (struct buffer *buf, Ibyte *base_pat, Bytecount len,
Bytebpos pos, Bytebpos lim, EMACS_INT n, Lisp_Object trt)
{
int forward = n > 0;
Bytecount buf_len = 0; /* Shut up compiler. */
if (lim > pos)
while (n > 0)
{
while (1)
{
Bytecount this_len = len;
Bytebpos this_pos = pos;
Ibyte *p = base_pat;
if (pos >= lim)
goto stop;
while (this_len > 0)
{
Ichar pat_ch, buf_ch;
Bytecount pat_len;
pat_ch = itext_ichar (p);
buf_ch = BYTE_BUF_FETCH_CHAR (buf, this_pos);
buf_ch = TRANSLATE (trt, buf_ch);
if (buf_ch != pat_ch)
break;
pat_len = itext_ichar_len (p);
p += pat_len;
this_len -= pat_len;
INC_BYTEBPOS (buf, this_pos);
}
if (this_len == 0)
{
buf_len = this_pos - pos;
pos = this_pos;
break;
}
INC_BYTEBPOS (buf, pos);
}
n--;
}
else
{
/* If lim < len, then there are too few buffer positions to hold the
pattern between the beginning of the buffer and lim. Adjust to
ensure pattern fits. If we don't do this, we can assert in the
DEC_BYTEBPOS below. */
if (lim < len)
lim = len;
while (n < 0)
{
while (1)
{
Bytecount this_len = len;
Bytebpos this_pos = pos;
Ibyte *p;
if (pos <= lim)
goto stop;
p = base_pat + len;
while (this_len > 0)
{
Ichar pat_ch, buf_ch;
DEC_IBYTEPTR (p);
DEC_BYTEBPOS (buf, this_pos);
pat_ch = itext_ichar (p);
buf_ch = BYTE_BUF_FETCH_CHAR (buf, this_pos);
buf_ch = TRANSLATE (trt, buf_ch);
if (buf_ch != pat_ch)
break;
this_len -= itext_ichar_len (p);
}
if (this_len == 0)
{
buf_len = pos - this_pos;
pos = this_pos;
break;
}
DEC_BYTEBPOS (buf, pos);
}
n++;
}
}
stop:
if (n == 0)
{
Charbpos beg, end, retval;
if (forward)
{
beg = bytebpos_to_charbpos (buf, pos - buf_len);
retval = end = bytebpos_to_charbpos (buf, pos);
}
else
{
retval = beg = bytebpos_to_charbpos (buf, pos);
end = bytebpos_to_charbpos (buf, pos + buf_len);
}
set_search_regs (buf, beg, end - beg);
return retval;
}
else if (n > 0)
return -n;
else
return n;
}
/* Do Boyer-Moore search N times for the string PAT,
whose length is LEN/LEN_BYTE,
from buffer position POS/POS_BYTE until LIM/LIM_BYTE.
DIRECTION says which direction we search in.
TRT and INVERSE_TRT are translation tables.
This kind of search works if all the characters in PAT that have
(non-ASCII) translation are the same aside from the last byte. This
makes it possible to translate just the last byte of a character, and do
so after just a simple test of the context.
If that criterion is not satisfied, do not call this function. You will
get an assertion failure. */
static Charbpos
boyer_moore (struct buffer *buf, Ibyte *base_pat, Bytecount len,
Bytebpos pos, Bytebpos lim, EMACS_INT n, Lisp_Object trt,
Lisp_Object inverse_trt, int USED_IF_MULE (charset_base))
{
/* #### Someone really really really needs to comment the workings
of this junk somewhat better.
BTW "BM" stands for Boyer-Moore, which is one of the standard
string-searching algorithms. It's the best string-searching
algorithm out there, provided that:
a) You're not fazed by algorithm complexity. (Rabin-Karp, which
uses hashing, is much much easier to code but not as fast.)
b) You can freely move backwards in the string that you're
searching through.
As the comment below tries to explain (but garbles in typical
programmer-ese), the idea is that you don't have to do a
string match at every successive position in the text. For
example, let's say the pattern is "a very long string". We
compare the last character in the string (`g') with the
corresponding character in the text. If it mismatches, and
it is, say, `z', then we can skip forward by the entire
length of the pattern because `z' does not occur anywhere
in the pattern. If the mismatching character does occur
in the pattern, we can usually still skip forward by more
than one: e.g. if it is `l', then we can skip forward
by the length of the substring "ong string" -- i.e. the
largest end section of the pattern that does not contain
the mismatched character. So what we do is compute, for
each possible character, the distance we can skip forward
(the "stride") and use it in the string matching. This
is what the BM_tab holds. */
REGISTER EMACS_INT *BM_tab;
EMACS_INT *BM_tab_base;
REGISTER Bytecount dirlen;
EMACS_INT infinity;
Bytebpos limit;
Bytecount stride_for_teases = 0;
REGISTER EMACS_INT i, j;
Ibyte *pat, *pat_end;
REGISTER Ibyte *cursor, *p_limit, *ptr2;
Ibyte simple_translate[0400];
REGISTER int direction = ((n > 0) ? 1 : -1);
#ifdef MULE
Ibyte translate_prev_byte = 0;
Ibyte translate_anteprev_byte = 0;
/* These need to be rethought in the event that the internal format
changes, or in the event that num_8_bit_fixed_chars disappears
(entirely_one_byte_p can be trivially worked out by checking is the
byte count equal to the char count.) */
int buffer_entirely_one_byte_p = buf->text->entirely_one_byte_p;
int buffer_nothing_greater_than_0xff =
buf->text->num_8_bit_fixed_chars == BUF_Z(buf) - BUF_BEG (buf);
#endif
#ifdef C_ALLOCA
EMACS_INT BM_tab_space[0400];
BM_tab = &BM_tab_space[0];
#else
BM_tab = alloca_array (EMACS_INT, 256);
#endif
/* The general approach is that we are going to maintain that we
know the first (closest to the present position, in whatever
direction we're searching) character that could possibly be
the last (furthest from present position) character of a
valid match. We advance the state of our knowledge by
looking at that character and seeing whether it indeed
matches the last character of the pattern. If it does, we
take a closer look. If it does not, we move our pointer (to
putative last characters) as far as is logically possible.
This amount of movement, which I call a stride, will be the
length of the pattern if the actual character appears nowhere
in the pattern, otherwise it will be the distance from the
last occurrence of that character to the end of the pattern.
As a coding trick, an enormous stride is coded into the table
for characters that match the last character. This allows
use of only a single test, a test for having gone past the
end of the permissible match region, to test for both
possible matches (when the stride goes past the end
immediately) and failure to match (where you get nudged past
the end one stride at a time).
Here we make a "mickey mouse" BM table. The stride of the
search is determined only by the last character of the
putative match. If that character does not match, we will
stride the proper distance to propose a match that
superimposes it on the last instance of a character that
matches it (per trt), or misses it entirely if there is
none. */
dirlen = len * direction;
infinity = dirlen - (lim + pos + len + len) * direction;
/* Record position after the end of the pattern. */
pat_end = base_pat + len;
if (direction < 0)
base_pat = pat_end - 1;
BM_tab_base = BM_tab;
BM_tab += 0400;
j = dirlen; /* to get it in a register */
/* A character that does not appear in the pattern induces a
stride equal to the pattern length. */
while (BM_tab_base != BM_tab)
{
*--BM_tab = j;
*--BM_tab = j;
*--BM_tab = j;
*--BM_tab = j;
}
/* We use this for translation, instead of TRT itself. We
fill this in to handle the characters that actually occur
in the pattern. Others don't matter anyway! */
xzero (simple_translate);
for (i = 0; i < 0400; i++)
simple_translate[i] = (Ibyte) i;
i = 0;
while (i != infinity)
{
Ibyte *ptr = base_pat + i;
i += direction;
if (i == dirlen)
i = infinity;
if (!NILP (trt))
{
#ifdef MULE
Ichar ch = -1, untranslated;
Ibyte byte;
int this_translated = 1;
/* Is *PTR the last byte of a character? */
if (pat_end - ptr == 1 || ibyte_first_byte_p (ptr[1]))
{
Ibyte *charstart = ptr;
while (!ibyte_first_byte_p (*charstart))
charstart--;
untranslated = itext_ichar (charstart);
ch = TRANSLATE (trt, untranslated);
if (!ibyte_first_byte_p (*ptr))
{
translate_prev_byte = ptr[-1];
if (!ibyte_first_byte_p (translate_prev_byte))
translate_anteprev_byte = ptr[-2];
}
if (ch != untranslated && /* Was translation done? */
charset_base != (ch & ~ICHAR_FIELD3_MASK))
{
/* In the very rare event that the CANON entry for this
character is not in the desired set, choose one that
is, from the equivalence set. It doesn't much matter
which, since we're building our own cheesy equivalence
table instead of using that belonging to the case
table directly.
We can get here if search_buffer has worked out that
the buffer is entirely single width. */
Ichar starting_ch = ch;
int count = 0;
do
{
ch = TRANSLATE (inverse_trt, ch);
if (charset_base == (ch & ~ICHAR_FIELD3_MASK))
break;
++count;
} while (starting_ch != ch);
/* If starting_ch is equal to ch (and count is not one,
which means no translation is necessary), the case
table is corrupt. (Any mapping in the canon table
should be reflected in the equivalence table, and we
know from the canon table that untranslated maps to
starting_ch and that untranslated has the correct value
for charset_base.) */
assert (1 == count || starting_ch != ch);
}
{
Ibyte tmp[MAX_ICHAR_LEN];
Bytecount chlen;
chlen = set_itext_ichar (tmp, ch);
byte = tmp[chlen - 1];
}
}
else
{
byte = *ptr;
this_translated = 0;
ch = -1;
}
/* BYTE = last byte of character CH when represented as text */
j = byte;
if (i == infinity)
stride_for_teases = BM_tab[j];
BM_tab[j] = dirlen - i;
/* A translation table is accompanied by its inverse -- see
comment in casetab.c. */
if (this_translated)
{
Ichar starting_ch = ch;
EMACS_INT starting_j = j;
text_checking_assert (valid_ichar_p (ch));
do
{
ch = TRANSLATE (inverse_trt, ch);
if (ch > 0x7F && buffer_entirely_one_byte_p)
continue;
if (ch > 0xFF && buffer_nothing_greater_than_0xff)
continue;
/* Retrieve last byte of character CH when represented as
text */
{
Ibyte tmp[MAX_ICHAR_LEN];
Bytecount chlen;
chlen = set_itext_ichar (tmp, ch);
j = tmp[chlen - 1];
}
/* For all the characters that map into CH, set up
simple_translate to map the last byte into
STARTING_J. */
simple_translate[j] = (Ibyte) starting_j;
BM_tab[j] = dirlen - i;
}
while (ch != starting_ch);
}
#else /* not MULE */
EMACS_INT k;
j = *ptr;
k = (j = TRANSLATE (trt, j));
if (i == infinity)
stride_for_teases = BM_tab[j];
BM_tab[j] = dirlen - i;
/* A translation table is accompanied by its inverse --
see comment in casetab.c. */
while ((j = TRANSLATE (inverse_trt, j)) != k)
{
simple_translate[j] = (Ibyte) k;
BM_tab[j] = dirlen - i;
}
#endif /* (not) MULE */
}
else
{
j = *ptr;
if (i == infinity)
stride_for_teases = BM_tab[j];
BM_tab[j] = dirlen - i;
}
/* stride_for_teases tells how much to stride if we get a
match on the far character but are subsequently
disappointed, by recording what the stride would have been
for that character if the last character had been
different. */
}
infinity = dirlen - infinity;
pos += dirlen - ((direction > 0) ? direction : 0);
/* loop invariant - pos points at where last char (first char if
reverse) of pattern would align in a possible match. */
while (n != 0)
{
Bytebpos tail_end;
Ibyte *tail_end_ptr;
/* It's been reported that some (broken) compiler thinks
that Boolean expressions in an arithmetic context are
unsigned. Using an explicit ?1:0 prevents this. */
if ((lim - pos - ((direction > 0) ? 1 : 0)) * direction < 0)
return n * (0 - direction);
/* First we do the part we can by pointers (maybe
nothing) */
QUIT;
pat = base_pat;
limit = pos - dirlen + direction;
/* XEmacs change: definitions of CEILING_OF and FLOOR_OF
have changed. See buffer.h. */
limit = ((direction > 0)
? BYTE_BUF_CEILING_OF (buf, limit) - 1
: BYTE_BUF_FLOOR_OF (buf, limit + 1));
/* LIMIT is now the last (not beyond-last!) value POS can
take on without hitting edge of buffer or the gap. */
limit = ((direction > 0)
? min (lim - 1, min (limit, pos + 20000))
: max (lim, max (limit, pos - 20000)));
tail_end = BYTE_BUF_CEILING_OF (buf, pos);
tail_end_ptr = BYTE_BUF_BYTE_ADDRESS (buf, tail_end);
if ((limit - pos) * direction > 20)
{
/* We have to be careful because the code can generate addresses
that don't point to the beginning of characters. */
p_limit = BYTE_BUF_BYTE_ADDRESS_NO_VERIFY (buf, limit);
ptr2 = (cursor = BYTE_BUF_BYTE_ADDRESS_NO_VERIFY (buf, pos));
/* In this loop, pos + cursor - ptr2 is the surrogate
for pos */
while (1) /* use one cursor setting as long as i can */
{
if (direction > 0) /* worth duplicating */
{
/* Use signed comparison if appropriate to make
cursor+infinity sure to be > p_limit.
Assuming that the buffer lies in a range of
addresses that are all "positive" (as ints)
or all "negative", either kind of comparison
will work as long as we don't step by
infinity. So pick the kind that works when
we do step by infinity. */
if ((EMACS_INT) (p_limit + infinity) >
(EMACS_INT) p_limit)
while ((EMACS_INT) cursor <=
(EMACS_INT) p_limit)
cursor += BM_tab[*cursor];
else
while ((EMACS_UINT) cursor <=
(EMACS_UINT) p_limit)
cursor += BM_tab[*cursor];
}
else
{
if ((EMACS_INT) (p_limit + infinity) <
(EMACS_INT) p_limit)
while ((EMACS_INT) cursor >=
(EMACS_INT) p_limit)
cursor += BM_tab[*cursor];
else
while ((EMACS_UINT) cursor >=
(EMACS_UINT) p_limit)
cursor += BM_tab[*cursor];
}
/* If you are here, cursor is beyond the end of the
searched region. This can happen if you match on
the far character of the pattern, because the
"stride" of that character is infinity, a number
able to throw you well beyond the end of the
search. It can also happen if you fail to match
within the permitted region and would otherwise
try a character beyond that region */
if ((cursor - p_limit) * direction <= len)
break; /* a small overrun is genuine */
cursor -= infinity; /* large overrun = hit */
i = dirlen - direction;
if (!NILP (trt))
{
while ((i -= direction) + direction != 0)
{
#ifdef MULE
Ichar ch;
cursor -= direction;
/* Translate only the last byte of a character. */
if ((cursor == tail_end_ptr
|| ibyte_first_byte_p (cursor[1]))
&& (ibyte_first_byte_p (cursor[0])
|| (translate_prev_byte == cursor[-1]
&& (ibyte_first_byte_p (translate_prev_byte)
|| translate_anteprev_byte == cursor[-2]))))
ch = simple_translate[*cursor];
else
ch = *cursor;
if (pat[i] != ch)
break;
#else
if (pat[i] != TRANSLATE (trt, *(cursor -= direction)))
break;
#endif
}
}
else
{
while ((i -= direction) + direction != 0)
if (pat[i] != *(cursor -= direction))
break;
}
cursor += dirlen - i - direction; /* fix cursor */
if (i + direction == 0)
{
cursor -= direction;
{
Bytebpos bytstart = (pos + cursor - ptr2 +
((direction > 0)
? 1 - len : 0));
Charbpos bufstart = bytebpos_to_charbpos (buf, bytstart);
Charbpos bufend = bytebpos_to_charbpos (buf, bytstart + len);
set_search_regs (buf, bufstart, bufend - bufstart);
}
if ((n -= direction) != 0)
cursor += dirlen; /* to resume search */
else
return ((direction > 0)
? search_regs.end[0] : search_regs.start[0]);
}
else
cursor += stride_for_teases; /* we lose - */
}
pos += cursor - ptr2;
}
else
/* Now we'll pick up a clump that has to be done the hard
way because it covers a discontinuity */
{
/* XEmacs change: definitions of CEILING_OF and FLOOR_OF
have changed. See buffer.h. */
limit = ((direction > 0)
? BYTE_BUF_CEILING_OF (buf, pos - dirlen + 1) - 1
: BYTE_BUF_FLOOR_OF (buf, pos - dirlen));
limit = ((direction > 0)
? min (limit + len, lim - 1)
: max (limit - len, lim));
/* LIMIT is now the last value POS can have
and still be valid for a possible match. */
while (1)
{
/* This loop can be coded for space rather than
speed because it will usually run only once.
(the reach is at most len + 21, and typically
does not exceed len) */
while ((limit - pos) * direction >= 0)
/* *not* BYTE_BUF_FETCH_CHAR. We are working here
with bytes, not characters. */
pos += BM_tab[*BYTE_BUF_BYTE_ADDRESS_NO_VERIFY (buf, pos)];
/* now run the same tests to distinguish going off
the end, a match or a phony match. */
if ((pos - limit) * direction <= len)
break; /* ran off the end */
/* Found what might be a match.
Set POS back to last (first if reverse) char pos. */
pos -= infinity;
i = dirlen - direction;
while ((i -= direction) + direction != 0)
{
#ifdef MULE
Ichar ch;
Ibyte *ptr;
#endif
pos -= direction;
#ifdef MULE
ptr = BYTE_BUF_BYTE_ADDRESS_NO_VERIFY (buf, pos);
if ((ptr == tail_end_ptr
|| ibyte_first_byte_p (ptr[1]))
&& (ibyte_first_byte_p (ptr[0])
|| (translate_prev_byte == ptr[-1]
&& (ibyte_first_byte_p (translate_prev_byte)
|| translate_anteprev_byte == ptr[-2]))))
ch = simple_translate[*ptr];
else
ch = *ptr;
if (pat[i] != ch)
break;
#else
if (pat[i] !=
TRANSLATE (trt,
*BYTE_BUF_BYTE_ADDRESS_NO_VERIFY (buf, pos)))
break;
#endif
}
/* Above loop has moved POS part or all the way back
to the first char pos (last char pos if reverse).
Set it once again at the last (first if reverse)
char. */
pos += dirlen - i- direction;
if (i + direction == 0)
{
pos -= direction;
{
Bytebpos bytstart = (pos +
((direction > 0)
? 1 - len : 0));
Charbpos bufstart = bytebpos_to_charbpos (buf, bytstart);
Charbpos bufend = bytebpos_to_charbpos (buf, bytstart + len);
set_search_regs (buf, bufstart, bufend - bufstart);
}
if ((n -= direction) != 0)
pos += dirlen; /* to resume search */
else
return ((direction > 0)
? search_regs.end[0] : search_regs.start[0]);
}
else
pos += stride_for_teases;
}
}
/* We have done one clump. Can we continue? */
if ((lim - pos) * direction < 0)
return (0 - n) * direction;
}
return bytebpos_to_charbpos (buf, pos);
}
/* Record the whole-match data (beginning BEG and end BEG + LEN) and the
buffer for a match just found. */
static void
set_search_regs (struct buffer *buf, Charbpos beg, Charcount len)
{
/* Make sure we have registers in which to store
the match position. */
if (search_regs.num_regs == 0)
{
search_regs.start = xnew (regoff_t);
search_regs.end = xnew (regoff_t);
search_regs.num_regs = 1;
}
clear_search_regs ();
search_regs.start[0] = beg;
search_regs.end[0] = beg + len;
last_thing_searched = wrap_buffer (buf);
}
/* Clear search registers so match data will be null. */
static void
clear_search_regs (void)
{
/* This function has been Mule-ized. */
int i;
for (i = 0; i < search_regs.num_regs; i++)
search_regs.start[i] = search_regs.end[i] = -1;
}
/* Given a string of words separated by word delimiters,
compute a regexp that matches those exact words
separated by arbitrary punctuation. */
static Lisp_Object
wordify (Lisp_Object buffer, Lisp_Object string)
{
Charcount i, len;
EMACS_INT punct_count = 0, word_count = 0;
struct buffer *buf = decode_buffer (buffer, 0);
Lisp_Object syntax_table = buf->mirror_syntax_table;
CHECK_STRING (string);
len = string_char_length (string);
for (i = 0; i < len; i++)
if (!WORD_SYNTAX_P (syntax_table, string_ichar (string, i)))
{
punct_count++;
if (i > 0 && WORD_SYNTAX_P (syntax_table,
string_ichar (string, i - 1)))
word_count++;
}
if (WORD_SYNTAX_P (syntax_table, string_ichar (string, len - 1)))
word_count++;
if (!word_count) return build_ascstring ("");
{
/* The following value is an upper bound on the amount of storage we
need. In non-Mule, it is exact. */
Ibyte *storage =
alloca_ibytes (XSTRING_LENGTH (string) - punct_count +
5 * (word_count - 1) + 4);
Ibyte *o = storage;
*o++ = '\\';
*o++ = 'b';
for (i = 0; i < len; i++)
{
Ichar ch = string_ichar (string, i);
if (WORD_SYNTAX_P (syntax_table, ch))
o += set_itext_ichar (o, ch);
else if (i > 0
&& WORD_SYNTAX_P (syntax_table,
string_ichar (string, i - 1))
&& --word_count)
{
*o++ = '\\';
*o++ = 'W';
*o++ = '\\';
*o++ = 'W';
*o++ = '*';
}
}
*o++ = '\\';
*o++ = 'b';
return make_string (storage, o - storage);
}
}
DEFUN ("search-backward", Fsearch_backward, 1, 5, "sSearch backward: ", /*
Search backward from point for STRING.
Set point to the beginning of the occurrence found, and return point.
Optional second argument LIMIT bounds the search; it is a buffer
position. The match found must not extend before that position.
The value nil is equivalent to (point-min).
Optional third argument NOERROR, if t, means just return nil (no
error) if the search fails. If neither nil nor t, set point to LIMIT
and return nil.
Optional fourth argument COUNT is a repeat count--search for
successive occurrences.
Optional fifth argument BUFFER specifies the buffer to search in and
defaults to the current buffer.
When the match is successful, this function modifies the match data
that `match-beginning', `match-end' and `match-data' access; save the
match data with `match-data' and restore it with `store-match-data' if
you want to preserve them. If the match fails, the match data from the
previous success match is preserved.
See also the function `replace-match'.
*/
(string, limit, noerror, count, buffer))
{
return search_command (string, limit, noerror, count, buffer, -1, 0, 0);
}
DEFUN ("search-forward", Fsearch_forward, 1, 5, "sSearch: ", /*
Search forward from point for STRING.
Set point to the end of the occurrence found, and return point.
Optional second argument LIMIT bounds the search; it is a buffer
position. The match found must not extend after that position. The
value nil is equivalent to (point-max).
Optional third argument NOERROR, if t, means just return nil (no
error) if the search fails. If neither nil nor t, set point to LIMIT
and return nil.
Optional fourth argument COUNT is a repeat count--search for
successive occurrences.
Optional fifth argument BUFFER specifies the buffer to search in and
defaults to the current buffer.
When the match is successful, this function modifies the match data
that `match-beginning', `match-end' and `match-data' access; save the
match data with `match-data' and restore it with `store-match-data' if
you want to preserve them. If the match fails, the match data from the
previous success match is preserved.
See also the function `replace-match'.
*/
(string, limit, noerror, count, buffer))
{
return search_command (string, limit, noerror, count, buffer, 1, 0, 0);
}
DEFUN ("word-search-backward", Fword_search_backward, 1, 5,
"sWord search backward: ", /*
Search backward from point for STRING, ignoring differences in punctuation.
Set point to the beginning of the occurrence found, and return point.
Optional second argument LIMIT bounds the search; it is a buffer
position. The match found must not extend before that position.
The value nil is equivalent to (point-min).
Optional third argument NOERROR, if t, means just return nil (no
error) if the search fails. If neither nil nor t, set point to LIMIT
and return nil.
Optional fourth argument COUNT is a repeat count--search for
successive occurrences.
Optional fifth argument BUFFER specifies the buffer to search in and
defaults to the current buffer.
When the match is successful, this function modifies the match data
that `match-beginning', `match-end' and `match-data' access; save the
match data with `match-data' and restore it with `store-match-data' if
you want to preserve them. If the match fails, the match data from the
previous success match is preserved.
See also the function `replace-match'.
*/
(string, limit, noerror, count, buffer))
{
return search_command (wordify (buffer, string), limit, noerror, count,
buffer, -1, 1, 0);
}
DEFUN ("word-search-forward", Fword_search_forward, 1, 5, "sWord search: ", /*
Search forward from point for STRING, ignoring differences in punctuation.
Set point to the end of the occurrence found, and return point.
Optional second argument LIMIT bounds the search; it is a buffer
position. The match found must not extend after that position. The
value nil is equivalent to (point-max).
Optional third argument NOERROR, if t, means just return nil (no
error) if the search fails. If neither nil nor t, set point to LIMIT
and return nil.
Optional fourth argument COUNT is a repeat count--search for
successive occurrences.
Optional fifth argument BUFFER specifies the buffer to search in and
defaults to the current buffer.
When the match is successful, this function modifies the match data
that `match-beginning', `match-end' and `match-data' access; save the
match data with `match-data' and restore it with `store-match-data' if
you want to preserve them. If the match fails, the match data from the
previous success match is preserved.
See also the function `replace-match'.
*/
(string, limit, noerror, count, buffer))
{
return search_command (wordify (buffer, string), limit, noerror, count,
buffer, 1, 1, 0);
}
DEFUN ("re-search-backward", Fre_search_backward, 1, 5,
"sRE search backward: ", /*
Search backward from point for match for regular expression REGEXP.
Set point to the beginning of the match, and return point.
The match found is the one starting last in the buffer
and yet ending before the origin of the search.
Optional second argument LIMIT bounds the search; it is a buffer
position. The match found must not extend before that position.
The value nil is equivalent to (point-min).
Optional third argument NOERROR, if t, means just return nil (no
error) if the search fails. If neither nil nor t, set point to LIMIT
and return nil.
Optional fourth argument COUNT is a repeat count--search for
successive occurrences.
Optional fifth argument BUFFER specifies the buffer to search in and
defaults to the current buffer.
When the match is successful, this function modifies the match data
that `match-beginning', `match-end' and `match-data' access; save the
match data with `match-data' and restore it with `store-match-data' if
you want to preserve them. If the match fails, the match data from the
previous success match is preserved.
See also the function `replace-match'.
*/
(regexp, limit, noerror, count, buffer))
{
return search_command (regexp, limit, noerror, count, buffer, -1, 1, 0);
}
DEFUN ("re-search-forward", Fre_search_forward, 1, 5, "sRE search: ", /*
Search forward from point for regular expression REGEXP.
Set point to the end of the occurrence found, and return point.
Optional second argument LIMIT bounds the search; it is a buffer
position. The match found must not extend after that position. The
value nil is equivalent to (point-max).
Optional third argument NOERROR, if t, means just return nil (no
error) if the search fails. If neither nil nor t, set point to LIMIT
and return nil.
Optional fourth argument COUNT is a repeat count--search for
successive occurrences.
Optional fifth argument BUFFER specifies the buffer to search in and
defaults to the current buffer.
When the match is successful, this function modifies the match data
that `match-beginning', `match-end' and `match-data' access; save the
match data with `match-data' and restore it with `store-match-data' if
you want to preserve them. If the match fails, the match data from the
previous success match is preserved.
See also the function `replace-match'.
*/
(regexp, limit, noerror, count, buffer))
{
return search_command (regexp, limit, noerror, count, buffer, 1, 1, 0);
}
DEFUN ("posix-search-backward", Fposix_search_backward, 1, 5,
"sPosix search backward: ", /*
Search backward from point for match for regular expression REGEXP.
Find the longest match in accord with Posix regular expression rules.
Set point to the beginning of the match, and return point.
The match found is the one starting last in the buffer
and yet ending before the origin of the search.
Optional second argument LIMIT bounds the search; it is a buffer
position. The match found must not extend before that position.
The value nil is equivalent to (point-min).
Optional third argument NOERROR, if t, means just return nil (no
error) if the search fails. If neither nil nor t, set point to LIMIT
and return nil.
Optional fourth argument COUNT is a repeat count--search for
successive occurrences.
Optional fifth argument BUFFER specifies the buffer to search in and
defaults to the current buffer.
When the match is successful, this function modifies the match data
that `match-beginning', `match-end' and `match-data' access; save the
match data with `match-data' and restore it with `store-match-data' if
you want to preserve them. If the match fails, the match data from the
previous success match is preserved.
See also the function `replace-match'.
*/
(regexp, limit, noerror, count, buffer))
{
return search_command (regexp, limit, noerror, count, buffer, -1, 1, 1);
}
DEFUN ("posix-search-forward", Fposix_search_forward, 1, 5, "sPosix search: ", /*
Search forward from point for regular expression REGEXP.
Find the longest match in accord with Posix regular expression rules.
Set point to the end of the occurrence found, and return point.
Optional second argument LIMIT bounds the search; it is a buffer
position. The match found must not extend after that position. The
value nil is equivalent to (point-max).
Optional third argument NOERROR, if t, means just return nil (no
error) if the search fails. If neither nil nor t, set point to LIMIT
and return nil.
Optional fourth argument COUNT is a repeat count--search for
successive occurrences.
Optional fifth argument BUFFER specifies the buffer to search in and
defaults to the current buffer.
When the match is successful, this function modifies the match data
that `match-beginning', `match-end' and `match-data' access; save the
match data with `match-data' and restore it with `store-match-data' if
you want to preserve them. If the match fails, the match data from the
previous success match is preserved.
See also the function `replace-match'.
*/
(regexp, limit, noerror, count, buffer))
{
return search_command (regexp, limit, noerror, count, buffer, 1, 1, 1);
}
static Lisp_Object
free_created_dynarrs (Lisp_Object cons)
{
Dynarr_free (get_opaque_ptr (XCAR (cons)));
Dynarr_free (get_opaque_ptr (XCDR (cons)));
free_opaque_ptr (XCAR (cons));
free_opaque_ptr (XCDR (cons));
free_cons (cons);
return Qnil;
}
DEFUN ("replace-match", Freplace_match, 1, 5, 0, /*
Replace text matched by last search with REPLACEMENT.
Leaves point at end of replacement text.
Optional boolean FIXEDCASE inhibits matching case of REPLACEMENT to source.
Optional boolean LITERAL inhibits interpretation of escape sequences.
Optional STRING provides the source text to replace.
Optional STRBUFFER may be a buffer, providing match context, or an integer
specifying the subexpression to replace.
If FIXEDCASE is non-nil, do not alter case of replacement text.
Otherwise maybe capitalize the whole text, or maybe just word initials,
based on the replaced text.
If the replaced text has only capital letters and has at least one
multiletter word, convert REPLACEMENT to all caps.
If the replaced text has at least one word starting with a capital letter,
then capitalize each word in REPLACEMENT.
If LITERAL is non-nil, insert REPLACEMENT literally.
Otherwise treat `\\' as special:
`\\&' in REPLACEMENT means substitute original matched text.
`\\N' means substitute what matched the Nth `\\(...\\)'.
If Nth parens didn't match, substitute nothing.
`\\\\' means insert one `\\'.
`\\u' means upcase the next character.
`\\l' means downcase the next character.
`\\U' means begin upcasing all following characters.
`\\L' means begin downcasing all following characters.
`\\E' means terminate the effect of any `\\U' or `\\L'.
Case changes made with `\\u', `\\l', `\\U', and `\\L' override
all other case changes that may be made in the replaced text.
If non-nil, STRING is the source string, and a new string with the specified
replacements is created and returned. Otherwise the current buffer is the
source text.
If non-nil, STRBUFFER may be an integer, interpreted as the index of the
subexpression to replace in the source text, or a buffer to provide the
syntax table and case table. If nil, then the \"subexpression\" is 0, i.e.,
the whole match, and the current buffer provides the syntax and case tables.
If STRING is nil, STRBUFFER must be nil or an integer.
Specifying a subexpression is only useful after a regular expression match,
since a fixed string search has no non-trivial subexpressions.
It is not possible to specify both a buffer and a subexpression. If that is
desired, the idiom `(with-current-buffer BUFFER (replace-match ... INTEGER))'
may be appropriate.
If STRING is nil but the last thing matched (or searched) was a string, or
STRING is a string but the last thing matched was a buffer, an
`invalid-argument' error will be signaled. (XEmacs does not check that the
last thing searched is the source string, but it is not useful to use a
different string as source.)
If no match (including searches) has been successful or the requested
subexpression was not matched, an `args-out-of-range' error will be
signaled. (If no match has ever been conducted in this instance of
XEmacs, an `invalid-operation' error will be signaled. This is very
rare.)
*/
(replacement, fixedcase, literal, string, strbuffer))
{
/* This function can GC */
enum { nochange, all_caps, cap_initial } case_action;
Charbpos pos, last;
int some_multiletter_word;
int some_lowercase;
int some_uppercase;
int some_nonuppercase_initial;
Ichar c, prevc;
Charcount inslen;
struct buffer *buf;
Lisp_Object syntax_table;
int mc_count;
Lisp_Object buffer;
int_dynarr *ul_action_dynarr = 0;
int_dynarr *ul_pos_dynarr = 0;
int sub = 0;
int speccount;
CHECK_STRING (replacement);
/* Because GNU decided to be incompatible here, we support the following
baroque and bogus API for the STRING and STRBUFFER arguments:
types interpretations
STRING STRBUFFER STRING STRBUFFER
nil nil none 0 = index of subexpression to replace
nil integer none index of subexpression to replace
nil other ***** error *****
string nil source current buffer provides syntax table
subexpression = 0 (whole match)
string buffer source buffer providing syntax table
subexpression = 0 (whole match)
string integer source current buffer provides syntax table
subexpression = STRBUFFER
string other ***** error *****
*/
/* Do STRBUFFER first; if STRING is nil, we'll overwrite BUF and BUFFER. */
/* If the match data were abstracted into a special "match data" type
instead of the typical half-assed "let the implementation be visible"
form it's in, we could extend it to include the last string matched
and the buffer used for that matching. But of course we can't change
it as it is.
*/
if (NILP (strbuffer) || BUFFERP (strbuffer))
{
buf = decode_buffer (strbuffer, 0);
}
else if (!NILP (strbuffer))
{
CHECK_FIXNUM (strbuffer);
sub = XFIXNUM (strbuffer);
if (sub < 0 || sub >= (int) search_regs.num_regs)
invalid_argument ("match data register invalid", strbuffer);
if (search_regs.start[sub] < 0)
invalid_argument ("match data register not set", strbuffer);
buf = current_buffer;
}
else
invalid_argument ("STRBUFFER must be nil, a buffer, or an integer",
strbuffer);
buffer = wrap_buffer (buf);
if (! NILP (string))
{
CHECK_STRING (string);
if (!EQ (last_thing_searched, Qt))
invalid_argument ("last thing matched was not a string", Qunbound);
}
else
{
if (!BUFFERP (last_thing_searched))
invalid_argument ("last thing matched was not a buffer", Qunbound);
buffer = last_thing_searched;
buf = XBUFFER (buffer);
}
syntax_table = buf->mirror_syntax_table;
case_action = nochange; /* We tried an initialization */
/* but some C compilers blew it */
if (search_regs.num_regs == 0)
signal_error (Qinvalid_operation,
"replace-match called before any match found", Qunbound);
if (NILP (string))
{
if (search_regs.start[sub] < BUF_BEGV (buf)
|| search_regs.start[sub] > search_regs.end[sub]
|| search_regs.end[sub] > BUF_ZV (buf))
args_out_of_range (make_fixnum (search_regs.start[sub]),
make_fixnum (search_regs.end[sub]));
}
else
{
if (search_regs.start[0] < 0
|| search_regs.start[0] > search_regs.end[0]
|| search_regs.end[0] > string_char_length (string))
args_out_of_range (make_fixnum (search_regs.start[0]),
make_fixnum (search_regs.end[0]));
}
if (NILP (fixedcase))
{
/* Decide how to casify by examining the matched text. */
last = search_regs.end[sub];
prevc = '\n';
case_action = all_caps;
/* some_multiletter_word is set nonzero if any original word
is more than one letter long. */
some_multiletter_word = 0;
some_lowercase = 0;
some_nonuppercase_initial = 0;
some_uppercase = 0;
for (pos = search_regs.start[sub]; pos < last; pos++)
{
if (NILP (string))
c = BUF_FETCH_CHAR (buf, pos);
else
c = string_ichar (string, pos);
if (LOWERCASEP (buf, c))
{
/* Cannot be all caps if any original char is lower case */
some_lowercase = 1;
if (!WORD_SYNTAX_P (syntax_table, prevc))
some_nonuppercase_initial = 1;
else
some_multiletter_word = 1;
}
else if (!NOCASEP (buf, c))
{
some_uppercase = 1;
if (!WORD_SYNTAX_P (syntax_table, prevc))
;
else
some_multiletter_word = 1;
}
else
{
/* If the initial is a caseless word constituent,
treat that like a lowercase initial. */
if (!WORD_SYNTAX_P (syntax_table, prevc))
some_nonuppercase_initial = 1;
}
prevc = c;
}
/* Convert to all caps if the old text is all caps
and has at least one multiletter word. */
if (! some_lowercase && some_multiletter_word)
case_action = all_caps;
/* Capitalize each word, if the old text has all capitalized words. */
else if (!some_nonuppercase_initial && some_multiletter_word)
case_action = cap_initial;
else if (!some_nonuppercase_initial && some_uppercase)
/* Should x -> yz, operating on X, give Yz or YZ?
We'll assume the latter. */
case_action = all_caps;
else
case_action = nochange;
}
/* Do replacement in a string. */
if (!NILP (string))
{
Lisp_Object before, after;
speccount = specpdl_depth ();
before = Fsubseq (string, Qzero, make_fixnum (search_regs.start[sub]));
after = Fsubseq (string, make_fixnum (search_regs.end[sub]), Qnil);
/* Do case substitution into REPLACEMENT if desired. */
if (NILP (literal))
{
Charcount stlen = string_char_length (replacement);
Charcount strpos;
/* XEmacs change: rewrote this loop somewhat to make it
cleaner. Also added \U, \E, etc. */
Charcount literal_start = 0;
/* We build up the substituted string in ACCUM. */
Lisp_Object accum;
accum = Qnil;
/* OK, the basic idea here is that we scan through the
replacement string until we find a backslash, which
represents a substring of the original string to be
substituted. We then append onto ACCUM the literal
text before the backslash (LASTPOS marks the
beginning of this) followed by the substring of the
original string that needs to be inserted. */
for (strpos = 0; strpos < stlen; strpos++)
{
/* If LITERAL_END is set, we've encountered a backslash
(the end of literal text to be inserted). */
Charcount literal_end = -1;
/* If SUBSTART is set, we need to also insert the
text from SUBSTART to SUBEND in the original string. */
Charcount substart = -1;
Charcount subend = -1;
c = string_ichar (replacement, strpos);
if (c == '\\' && strpos < stlen - 1)
{
c = string_ichar (replacement, ++strpos);
if (c == '&')
{
literal_end = strpos - 1;
substart = search_regs.start[0];
subend = search_regs.end[0];
}
/* #### This logic is totally broken,
since we can have backrefs like "\99", right? */
else if (c >= '1' && c <= '9' &&
c <= search_regs.num_regs + '0')
{
if (search_regs.start[c - '0'] >= 0)
{
literal_end = strpos - 1;
substart = search_regs.start[c - '0'];
subend = search_regs.end[c - '0'];
}
}
else if (c == 'U' || c == 'u' || c == 'L' || c == 'l' ||
c == 'E')
{
/* Keep track of all case changes requested, but don't
make them now. Do them later so we override
everything else. */
if (!ul_pos_dynarr)
{
ul_pos_dynarr = Dynarr_new (int);
ul_action_dynarr = Dynarr_new (int);
record_unwind_protect
(free_created_dynarrs,
noseeum_cons
(make_opaque_ptr (ul_pos_dynarr),
make_opaque_ptr (ul_action_dynarr)));
}
literal_end = strpos - 1;
Dynarr_add (ul_pos_dynarr,
(!NILP (accum)
? string_char_length (accum)
: 0) + (literal_end - literal_start));
Dynarr_add (ul_action_dynarr, c);
}
else if (c == '\\')
/* So we get just one backslash. */
literal_end = strpos;
}
if (literal_end >= 0)
{
Lisp_Object literal_text = Qnil;
Lisp_Object substring = Qnil;
if (literal_end != literal_start)
literal_text = Fsubseq (replacement,
make_fixnum (literal_start),
make_fixnum (literal_end));
if (substart >= 0 && subend != substart)
substring = Fsubseq (string, make_fixnum (substart),
make_fixnum (subend));
if (!NILP (literal_text) || !NILP (substring))
accum = concat3 (accum, literal_text, substring);
literal_start = strpos + 1;
}
}
if (strpos != literal_start)
/* some literal text at end to be inserted */
replacement = concat2 (accum, Fsubseq (replacement,
make_fixnum (literal_start),
make_fixnum (strpos)));
else
replacement = accum;
}
/* replacement can be nil. */
if (NILP (replacement))
replacement = build_ascstring ("");
if (case_action == all_caps)
replacement = Fupcase (replacement, buffer);
else if (case_action == cap_initial)
replacement = Fupcase_initials (replacement, buffer);
/* Now finally, we need to process the \U's, \E's, etc. */
if (ul_pos_dynarr)
{
int i = 0;
int cur_action = 'E';
Charcount stlen = string_char_length (replacement);
Charcount strpos;
for (strpos = 0; strpos < stlen; strpos++)
{
Ichar curchar = string_ichar (replacement, strpos);
Ichar newchar = -1;
if (i < Dynarr_length (ul_pos_dynarr) &&
strpos == Dynarr_at (ul_pos_dynarr, i))
{
int new_action = Dynarr_at (ul_action_dynarr, i);
i++;
if (new_action == 'u')
newchar = UPCASE (buf, curchar);
else if (new_action == 'l')
newchar = DOWNCASE (buf, curchar);
else
cur_action = new_action;
}
if (newchar == -1)
{
if (cur_action == 'U')
newchar = UPCASE (buf, curchar);
else if (cur_action == 'L')
newchar = DOWNCASE (buf, curchar);
else
newchar = curchar;
}
if (newchar != curchar)
set_string_char (replacement, strpos, newchar);
}
}
/* frees the Dynarrs if necessary. */
unbind_to (speccount);
return concat3 (before, replacement, after);
}
mc_count = begin_multiple_change (buf, search_regs.start[sub],
search_regs.end[sub]);
/* begin_multiple_change() records an unwind-protect, so we need to
record this value now. */
speccount = specpdl_depth ();
/* We insert the replacement text before the old text, and then
delete the original text. This means that markers at the
beginning or end of the original will float to the corresponding
position in the replacement. */
BUF_SET_PT (buf, search_regs.start[sub]);
if (!NILP (literal))
Finsert (1, &replacement);
else
{
Charcount stlen = string_char_length (replacement);
Charcount strpos;
struct gcpro gcpro1;
GCPRO1 (replacement);
for (strpos = 0; strpos < stlen; strpos++)
{
/* on the first iteration assert(offset==0),
exactly complementing BUF_SET_PT() above.
During the loop, it keeps track of the amount inserted.
*/
Charcount offset = BUF_PT (buf) - search_regs.start[sub];
c = string_ichar (replacement, strpos);
if (c == '\\' && strpos < stlen - 1)
{
/* XXX FIXME: replacing just a substring non-literally
using backslash refs to the match looks dangerous. But
<15366.18513.698042.156573@ns.caldera.de> from Torsten Duwe
claims Finsert_buffer_substring already
handles this correctly.
*/
c = string_ichar (replacement, ++strpos);
if (c == '&')
Finsert_buffer_substring
(buffer,
make_fixnum (search_regs.start[0] + offset),
make_fixnum (search_regs.end[0] + offset));
/* #### This logic is totally broken,
since we can have backrefs like "\99", right? */
else if (c >= '1' && c <= '9' &&
c <= search_regs.num_regs + '0')
{
if (search_regs.start[c - '0'] >= 1)
Finsert_buffer_substring
(buffer,
make_fixnum (search_regs.start[c - '0'] + offset),
make_fixnum (search_regs.end[c - '0'] + offset));
}
else if (c == 'U' || c == 'u' || c == 'L' || c == 'l' ||
c == 'E')
{
/* Keep track of all case changes requested, but don't
make them now. Do them later so we override
everything else. */
if (!ul_pos_dynarr)
{
ul_pos_dynarr = Dynarr_new (int);
ul_action_dynarr = Dynarr_new (int);
record_unwind_protect
(free_created_dynarrs,
Fcons (make_opaque_ptr (ul_pos_dynarr),
make_opaque_ptr (ul_action_dynarr)));
}
Dynarr_add (ul_pos_dynarr, BUF_PT (buf));
Dynarr_add (ul_action_dynarr, c);
}
else
buffer_insert_emacs_char (buf, c);
}
else
buffer_insert_emacs_char (buf, c);
}
UNGCPRO;
}
inslen = BUF_PT (buf) - (search_regs.start[sub]);
buffer_delete_range (buf, search_regs.start[sub] + inslen,
search_regs.end[sub] + inslen, 0);
if (case_action == all_caps)
Fupcase_region (make_fixnum (BUF_PT (buf) - inslen),
make_fixnum (BUF_PT (buf)), buffer);
else if (case_action == cap_initial)
Fupcase_initials_region (make_fixnum (BUF_PT (buf) - inslen),
make_fixnum (BUF_PT (buf)), buffer);
/* Now go through and make all the case changes that were requested
in the replacement string. */
if (ul_pos_dynarr)
{
Charbpos eend = BUF_PT (buf);
int i = 0;
int cur_action = 'E';
for (pos = BUF_PT (buf) - inslen; pos < eend; pos++)
{
Ichar curchar = BUF_FETCH_CHAR (buf, pos);
Ichar newchar = -1;
if (i < Dynarr_length (ul_pos_dynarr) &&
pos == Dynarr_at (ul_pos_dynarr, i))
{
int new_action = Dynarr_at (ul_action_dynarr, i);
i++;
if (new_action == 'u')
newchar = UPCASE (buf, curchar);
else if (new_action == 'l')
newchar = DOWNCASE (buf, curchar);
else
cur_action = new_action;
}
if (newchar == -1)
{
if (cur_action == 'U')
newchar = UPCASE (buf, curchar);
else if (cur_action == 'L')
newchar = DOWNCASE (buf, curchar);
else
newchar = curchar;
}
if (newchar != curchar)
buffer_replace_char (buf, pos, newchar, 0, 0);
}
}
/* frees the Dynarrs if necessary. */
unbind_to (speccount);
end_multiple_change (buf, mc_count);
return Qnil;
}
static Lisp_Object
match_limit (Lisp_Object num, int beginningp)
{
int n;
CHECK_FIXNUM (num);
n = XFIXNUM (num);
if (n < 0 || n >= search_regs.num_regs)
args_out_of_range (num, make_fixnum (search_regs.num_regs));
if (search_regs.num_regs == 0 ||
search_regs.start[n] < 0)
return Qnil;
return make_fixnum (beginningp ? search_regs.start[n] : search_regs.end[n]);
}
DEFUN ("match-beginning", Fmatch_beginning, 1, 1, 0, /*
Return position of start of text matched by last regexp search.
NUM, specifies which parenthesized expression in the last regexp.
Value is nil if NUMth pair didn't match, or there were less than NUM pairs.
Zero means the entire text matched by the whole regexp or whole string.
*/
(num))
{
return match_limit (num, 1);
}
DEFUN ("match-end", Fmatch_end, 1, 1, 0, /*
Return position of end of text matched by last regexp search.
NUM specifies which parenthesized expression in the last regexp.
Value is nil if NUMth pair didn't match, or there were less than NUM pairs.
Zero means the entire text matched by the whole regexp or whole string.
*/
(num))
{
return match_limit (num, 0);
}
DEFUN ("match-data", Fmatch_data, 0, 2, 0, /*
Return a list containing all info on what the last regexp search matched.
Element 2N is `(match-beginning N)'; element 2N + 1 is `(match-end N)'.
All the elements are markers or nil (nil if the Nth pair didn't match)
if the last match was on a buffer; integers or nil if a string was matched.
Use `store-match-data' to reinstate the data in this list.
If INTEGERS (the optional first argument) is non-nil, always use integers
\(rather than markers) to represent buffer positions.
If REUSE is a list, reuse it as part of the value. If REUSE is long enough
to hold all the values, and if INTEGERS is non-nil, no consing is done.
*/
(integers, reuse))
{
Lisp_Object tail, prev;
Lisp_Object *data;
int i;
Charcount len;
if (NILP (last_thing_searched))
/*error ("match-data called before any match found", Qunbound);*/
return Qnil;
data = alloca_array (Lisp_Object, 2 * search_regs.num_regs);
len = -1;
for (i = 0; i < search_regs.num_regs; i++)
{
Charbpos start = search_regs.start[i];
if (start >= 0)
{
if (EQ (last_thing_searched, Qt)
|| !NILP (integers))
{
data[2 * i] = make_fixnum (start);
data[2 * i + 1] = make_fixnum (search_regs.end[i]);
}
else if (BUFFERP (last_thing_searched))
{
data[2 * i] = Fmake_marker ();
Fset_marker (data[2 * i],
make_fixnum (start),
last_thing_searched);
data[2 * i + 1] = Fmake_marker ();
Fset_marker (data[2 * i + 1],
make_fixnum (search_regs.end[i]),
last_thing_searched);
}
else
/* last_thing_searched must always be Qt, a buffer, or Qnil. */
ABORT ();
len = i;
}
else
data[2 * i] = data [2 * i + 1] = Qnil;
}
if (!CONSP (reuse))
return Flist (2 * len + 2, data);
/* If REUSE is a list, store as many value elements as will fit
into the elements of REUSE. */
for (prev = Qnil, i = 0, tail = reuse; CONSP (tail); i++, tail = XCDR (tail))
{
if (i < 2 * len + 2)
XCAR (tail) = data[i];
else
XCAR (tail) = Qnil;
prev = tail;
}
/* If we couldn't fit all value elements into REUSE,
cons up the rest of them and add them to the end of REUSE. */
if (i < 2 * len + 2)
XCDR (prev) = Flist (2 * len + 2 - i, data + i);
return reuse;
}
DEFUN ("store-match-data", Fstore_match_data, 1, 1, 0, /*
Set internal data on last search match from elements of LIST.
LIST should have been created by calling `match-data' previously,
or be nil, to clear the internal match data.
*/
(list))
{
REGISTER int i;
REGISTER Lisp_Object marker;
int num_regs;
int length;
/* Some FSF junk with running_asynch_code, to preserve the match
data. Not necessary because we don't call process filters
asynchronously (i.e. from within QUIT). */
CONCHECK_LIST (list);
/* Unless we find a marker with a buffer in LIST, assume that this
match data came from a string. */
last_thing_searched = Qt;
/* Allocate registers if they don't already exist. */
length = XFIXNUM (Flength (list)) / 2;
num_regs = search_regs.num_regs;
if (length > num_regs)
{
if (search_regs.num_regs == 0)
{
search_regs.start = xnew_array (regoff_t, length);
search_regs.end = xnew_array (regoff_t, length);
}
else
{
XREALLOC_ARRAY (search_regs.start, regoff_t, length);
XREALLOC_ARRAY (search_regs.end, regoff_t, length);
}
search_regs.num_regs = length;
}
for (i = 0; i < num_regs; i++)
{
marker = Fcar (list);
if (NILP (marker))
{
search_regs.start[i] = -1;
list = Fcdr (list);
}
else
{
if (MARKERP (marker))
{
if (XMARKER (marker)->buffer == 0)
marker = Qzero;
else
last_thing_searched = wrap_buffer (XMARKER (marker)->buffer);
}
CHECK_FIXNUM_COERCE_MARKER (marker);
search_regs.start[i] = XFIXNUM (marker);
list = Fcdr (list);
marker = Fcar (list);
if (MARKERP (marker) && XMARKER (marker)->buffer == 0)
marker = Qzero;
CHECK_FIXNUM_COERCE_MARKER (marker);
search_regs.end[i] = XFIXNUM (marker);
}
list = Fcdr (list);
}
return Qnil;
}
/* Quote a string to inactivate reg-expr chars */
DEFUN ("regexp-quote", Fregexp_quote, 1, 1, 0, /*
Return a regexp string which matches exactly STRING and nothing else.
*/
(string))
{
REGISTER Ibyte *in, *out, *end;
REGISTER Ibyte *temp;
CHECK_STRING (string);
temp = alloca_ibytes (XSTRING_LENGTH (string) * 2);
/* Now copy the data into the new string, inserting escapes. */
in = XSTRING_DATA (string);
end = in + XSTRING_LENGTH (string);
out = temp;
while (in < end)
{
Ichar c = itext_ichar (in);
if (c == '[' || c == ']'
|| c == '*' || c == '.' || c == '\\'
|| c == '?' || c == '+'
|| c == '^' || c == '$')
*out++ = '\\';
out += set_itext_ichar (out, c);
INC_IBYTEPTR (in);
}
return make_string (temp, out - temp);
}
DEFUN ("set-word-regexp", Fset_word_regexp, 1, 1, 0, /*
Set the regexp to be used to match a word in regular-expression searching.
#### Not yet implemented. Currently does nothing.
#### Do not use this yet. Its calling interface is likely to change.
*/
(UNUSED (regexp)))
{
return Qnil;
}
#ifdef DEBUG_XEMACS
static int
debug_regexps_changed (Lisp_Object UNUSED (sym), Lisp_Object *val,
Lisp_Object UNUSED (in_object),
int UNUSED (flags))
{
int newval = 0;
EXTERNAL_LIST_LOOP_2 (elt, *val)
{
CHECK_SYMBOL (elt);
if (EQ (elt, Qcompilation))
newval |= RE_DEBUG_COMPILATION;
else if (EQ (elt, Qfailure_point))
newval |= RE_DEBUG_FAILURE_POINT;
else if (EQ (elt, Qmatching))
newval |= RE_DEBUG_MATCHING;
else
invalid_argument
("Expected `compilation', `failure-point' or `matching'", elt);
}
debug_regexps = newval;
return 0;
}
#endif /* DEBUG_XEMACS */
/************************************************************************/
/* initialization */
/************************************************************************/
void
syms_of_search (void)
{
DEFERROR_STANDARD (Qsearch_failed, Qinvalid_operation);
DEFERROR_STANDARD (Qinvalid_regexp, Qsyntax_error);
Fput (Qinvalid_regexp, Qerror_lacks_explanatory_string, Qt);
DEFSUBR (Flooking_at);
DEFSUBR (Fposix_looking_at);
DEFSUBR (Fstring_match);
DEFSUBR (Fposix_string_match);
DEFSUBR (Fskip_chars_forward);
DEFSUBR (Fskip_chars_backward);
DEFSUBR (Fskip_syntax_forward);
DEFSUBR (Fskip_syntax_backward);
DEFSUBR (Fsearch_forward);
DEFSUBR (Fsearch_backward);
DEFSUBR (Fword_search_forward);
DEFSUBR (Fword_search_backward);
DEFSUBR (Fre_search_forward);
DEFSUBR (Fre_search_backward);
DEFSUBR (Fposix_search_forward);
DEFSUBR (Fposix_search_backward);
DEFSUBR (Freplace_match);
DEFSUBR (Fmatch_beginning);
DEFSUBR (Fmatch_end);
DEFSUBR (Fmatch_data);
DEFSUBR (Fstore_match_data);
DEFSUBR (Fregexp_quote);
DEFSUBR (Fset_word_regexp);
}
void
reinit_vars_of_search (void)
{
int i;
last_thing_searched = Qnil;
staticpro_nodump (&last_thing_searched);
for (i = 0; i < REGEXP_CACHE_SIZE; ++i)
{
searchbufs[i].buf.allocated = 100;
searchbufs[i].buf.buffer = (unsigned char *) xmalloc (100);
searchbufs[i].buf.fastmap = searchbufs[i].fastmap;
searchbufs[i].regexp = Qnil;
staticpro_nodump (&searchbufs[i].regexp);
searchbufs[i].next = (i == REGEXP_CACHE_SIZE-1 ? 0 : &searchbufs[i+1]);
}
searchbuf_head = &searchbufs[0];
}
void
vars_of_search (void)
{
DEFVAR_LISP ("forward-word-regexp", &Vforward_word_regexp /*
*Regular expression to be used in `forward-word'.
#### Not yet implemented.
*/ );
Vforward_word_regexp = Qnil;
DEFVAR_LISP ("backward-word-regexp", &Vbackward_word_regexp /*
*Regular expression to be used in `backward-word'.
#### Not yet implemented.
*/ );
Vbackward_word_regexp = Qnil;
DEFVAR_INT ("warn-about-possibly-incompatible-back-references",
&warn_about_possibly_incompatible_back_references /*
If true, issue warnings when new-semantics back references occur.
This is to catch places where old code might inadvertently have changed
semantics. This will occur in old code only where more than nine groups
occur and a back reference to one of them is directly followed by a digit.
*/ );
warn_about_possibly_incompatible_back_references = 1;
Vskip_chars_range_table = Fmake_range_table (Qstart_closed_end_closed);
staticpro (&Vskip_chars_range_table);
#ifdef DEBUG_XEMACS
DEFSYMBOL (Qsearch_algorithm_used);
DEFSYMBOL (Qboyer_moore);
DEFSYMBOL (Qsimple_search);
DEFSYMBOL (Qcompilation);
DEFSYMBOL (Qfailure_point);
DEFSYMBOL (Qmatching);
DEFVAR_INT ("debug-searches", &debug_searches /*
If non-zero, bind `search-algorithm-used' to `boyer-moore' or `simple-search',
depending on the algorithm used for each search. Used for testing.
*/ );
debug_searches = 0;
DEFVAR_LISP_MAGIC ("debug-regexps", &Vdebug_regexps, /*
List of areas to display debug info about during regexp operation.
The following areas are recognized:
`compilation' Display the result of compiling a regexp.
`failure-point' Display info about failure points reached.
`matching' Display info about the process of matching a regex against
text.
*/ debug_regexps_changed);
Vdebug_regexps = Qnil;
debug_regexps = 0;
#endif /* DEBUG_XEMACS */
}