/* Plug-compatible replacement for UNIX qsort.
Copyright (C) 1989 Free Software Foundation, Inc.
Written by Douglas C. Schmidt (schmidt@ics.uci.edu)
This file is part of GNU CC.
GNU QSORT is free software: you can redistribute it and/or modify it
under the terms of the GNU General Public License as published by the
Free Software Foundation, either version 3 of the License, or (at your
option) any later version.
GNU QSORT is distributed in the hope that it will be useful, but WITHOUT
ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
for more details.
You should have received a copy of the GNU General Public License
along with GNU QSORT. If not, see . */
/* Synched up with: FSF 19.28. */
#ifdef sparc
#include
#endif
/* Invoke the comparison function, returns either 0, < 0, or > 0. */
#define CMP(A,B) ((*cmp)((A),(B)))
/* Byte-wise swap two items of size SIZE. */
#define SWAP(A,B,SIZE) do {int sz = (SIZE); char *a = (A); char *b = (B); \
do { char _temp = *a;*a++ = *b;*b++ = _temp;} while (--sz);} while (0)
/* Copy SIZE bytes from item B to item A. */
#define COPY(A,B,SIZE) {int sz = (SIZE); do { *(A)++ = *(B)++; } while (--sz); }
/* This should be replaced by a standard ANSI macro. */
#define BYTES_PER_WORD 8
/* The next 4 #defines implement a very fast in-line stack abstraction. */
#define STACK_SIZE (BYTES_PER_WORD * sizeof (long))
#define PUSH(LOW,HIGH) do {top->lo = LOW;top++->hi = HIGH;} while (0)
#define POP(LOW,HIGH) do {LOW = (--top)->lo;HIGH = top->hi;} while (0)
#define STACK_NOT_EMPTY (stack < top)
/* Discontinue quicksort algorithm when partition gets below this size.
This particular magic number was chosen to work best on a Sun 4/260. */
#define MAX_THRESH 4
/* Stack node declarations used to store unfulfilled partition obligations. */
typedef struct
{
char *lo;
char *hi;
} stack_node;
/* Order size using quicksort. This implementation incorporates
four optimizations discussed in Sedgewick:
1. Non-recursive, using an explicit stack of pointer that store the
next array partition to sort. To save time, this maximum amount
of space required to store an array of MAX_INT is allocated on the
stack. Assuming a 32-bit integer, this needs only 32 *
sizeof (stack_node) == 136 bits. Pretty cheap, actually.
2. Choose the pivot element using a median-of-three decision tree.
This reduces the probability of selecting a bad pivot value and
eliminates certain extraneous comparisons.
3. Only quicksorts TOTAL_ELEMS / MAX_THRESH partitions, leaving
insertion sort to order the MAX_THRESH items within each partition.
This is a big win, since insertion sort is faster for small, mostly
sorted array segments.
4. The larger of the two sub-partitions is always pushed onto the
stack first, with the algorithm then concentrating on the
smaller partition. This *guarantees* no more than log (n)
stack size is needed (actually O(1) in this case)! */
int
qsort (base_ptr, total_elems, size, cmp)
char *base_ptr;
int total_elems;
int size;
int (*cmp)();
{
/* Allocating SIZE bytes for a pivot buffer facilitates a better
algorithm below since we can do comparisons directly on the pivot. */
char *pivot_buffer = (char *) alloca (size);
int max_thresh = MAX_THRESH * size;
if (total_elems > MAX_THRESH)
{
char *lo = base_ptr;
char *hi = lo + size * (total_elems - 1);
stack_node stack[STACK_SIZE]; /* Largest size needed for 32-bit int!!! */
stack_node *top = stack + 1;
while (STACK_NOT_EMPTY)
{
char *left_ptr;
char *right_ptr;
{
char *pivot = pivot_buffer;
{
/* Select median value from among LO, MID, and HI. Rearrange
LO and HI so the three values are sorted. This lowers the
probability of picking a pathological pivot value and
skips a comparison for both the LEFT_PTR and RIGHT_PTR. */
char *mid = lo + size * ((hi - lo) / size >> 1);
if (CMP (mid, lo) < 0)
SWAP (mid, lo, size);
if (CMP (hi, mid) < 0)
SWAP (mid, hi, size);
else
goto jump_over;
if (CMP (mid, lo) < 0)
SWAP (mid, lo, size);
jump_over:
COPY (pivot, mid, size);
pivot = pivot_buffer;
}
left_ptr = lo + size;
right_ptr = hi - size;
/* Here's the famous ``collapse the walls'' section of quicksort.
Gotta like those tight inner loops! They are the main reason
that this algorithm runs much faster than others. */
do
{
while (CMP (left_ptr, pivot) < 0)
left_ptr += size;
while (CMP (pivot, right_ptr) < 0)
right_ptr -= size;
if (left_ptr < right_ptr)
{
SWAP (left_ptr, right_ptr, size);
left_ptr += size;
right_ptr -= size;
}
else if (left_ptr == right_ptr)
{
left_ptr += size;
right_ptr -= size;
break;
}
}
while (left_ptr <= right_ptr);
}
/* Set up pointers for next iteration. First determine whether
left and right partitions are below the threshold size. If so,
ignore one or both. Otherwise, push the larger partition's
bounds on the stack and continue sorting the smaller one. */
if ((right_ptr - lo) <= max_thresh)
{
if ((hi - left_ptr) <= max_thresh) /* Ignore both small partitions. */
POP (lo, hi);
else /* Ignore small left partition. */
lo = left_ptr;
}
else if ((hi - left_ptr) <= max_thresh) /* Ignore small right partition. */
hi = right_ptr;
else if ((right_ptr - lo) > (hi - left_ptr)) /* Push larger left partition indices. */
{
PUSH (lo, right_ptr);
lo = left_ptr;
}
else /* Push larger right partition indices. */
{
PUSH (left_ptr, hi);
hi = right_ptr;
}
}
}
/* Once the BASE_PTR array is partially sorted by quicksort the rest
is completely sorted using insertion sort, since this is efficient
for partitions below MAX_THRESH size. BASE_PTR points to the beginning
of the array to sort, and END_PTR points at the very last element in
the array (*not* one beyond it!). */
#define MIN(X,Y) ((X) < (Y) ? (X) : (Y))
{
char *end_ptr = base_ptr + size * (total_elems - 1);
char *run_ptr;
char *tmp_ptr = base_ptr;
char *thresh = MIN (end_ptr, base_ptr + max_thresh);
/* Find smallest element in first threshold and place it at the
array's beginning. This is the smallest array element,
and the operation speeds up insertion sort's inner loop. */
for (run_ptr = tmp_ptr + size; run_ptr <= thresh; run_ptr += size)
if (CMP (run_ptr, tmp_ptr) < 0)
tmp_ptr = run_ptr;
if (tmp_ptr != base_ptr)
SWAP (tmp_ptr, base_ptr, size);
/* Insertion sort, running from left-hand-side up to `right-hand-side.'
Pretty much straight out of the original GNU qsort routine. */
for (run_ptr = base_ptr + size; (tmp_ptr = run_ptr += size) <= end_ptr; )
{
while (CMP (run_ptr, tmp_ptr -= size) < 0)
;
if ((tmp_ptr += size) != run_ptr)
{
char *trav;
for (trav = run_ptr + size; --trav >= run_ptr;)
{
char c = *trav;
char *hi, *lo;
for (hi = lo = trav; (lo -= size) >= tmp_ptr; hi = lo)
*hi = *lo;
*hi = c;
}
}
}
}
return 1;
}