/* Header for multilingual functions. Copyright (C) 1992, 1995 Free Software Foundation, Inc. Copyright (C) 1995 Sun Microsystems, Inc. This file is part of XEmacs. XEmacs is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2, or (at your option) any later version. XEmacs is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with XEmacs; see the file COPYING. If not, write to the Free Software Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ /* Synched up with: Mule 2.3. Not in FSF. */ /* Rewritten by Ben Wing . */ #ifndef INCLUDED_mule_charset_h_ #define INCLUDED_mule_charset_h_ /* 1. Character Sets ================= A character set (or "charset") is an ordered set of characters. A particular character in a charset is indexed using one or more "position codes", which are non-negative integers. The number of position codes needed to identify a particular character in a charset is called the "dimension" of the charset. In XEmacs/Mule, all charsets have 1 or 2 dimensions, and the size of all charsets (except for a few special cases) is either 94, 96, 94 by 94, or 96 by 96. The range of position codes used to index characters from any of these types of character sets is as follows: Charset type Position code 1 Position code 2 ------------------------------------------------------------ 94 33 - 126 N/A 96 32 - 127 N/A 94x94 33 - 126 33 - 126 96x96 32 - 127 32 - 127 Note that in the above cases position codes do not start at an expected value such as 0 or 1. The reason for this will become clear later. For example, Latin-1 is a 96-character charset, and JISX0208 (the Japanese national character set) is a 94x94-character charset. [Note that, although the ranges above define the *valid* position codes for a charset, some of the slots in a particular charset may in fact be empty. This is the case for JISX0208, for example, where (e.g.) all the slots whose first position code is in the range 118 - 127 are empty.] There are three charsets that do not follow the above rules. All of them have one dimension, and have ranges of position codes as follows: Charset name Position code 1 ------------------------------------ ASCII 0 - 127 Control-1 0 - 31 Composite 0 - some large number (The upper bound of the position code for composite characters has not yet been determined, but it will probably be at least 16,383). ASCII is the union of two subsidiary character sets: Printing-ASCII (the printing ASCII character set, consisting of position codes 33 - 126, like for a standard 94-character charset) and Control-ASCII (the non-printing characters that would appear in a binary file with codes 0 - 32 and 127). Control-1 contains the non-printing characters that would appear in a binary file with codes 128 - 159. Composite contains characters that are generated by overstriking one or more characters from other charsets. Note that some characters in ASCII, and all characters in Control-1, are "control" (non-printing) characters. These have no printed representation but instead control some other function of the printing (e.g. TAB or 8 moves the current character position to the next tab stop). All other characters in all charsets are "graphic" (printing) characters. When a binary file is read in, the bytes in the file are assigned to character sets as follows: Bytes Character set Range -------------------------------------------------- 0 - 127 ASCII 0 - 127 128 - 159 Control-1 0 - 31 160 - 255 Latin-1 32 - 127 This is a bit ad-hoc but gets the job done. 2. Encodings ============ An "encoding" is a way of numerically representing characters from one or more character sets. If an encoding only encompasses one character set, then the position codes for the characters in that character set could be used directly. This is not possible, however, if more than one character set is to be used in the encoding. For example, the conversion detailed above between bytes in a binary file and characters is effectively an encoding that encompasses the three character sets ASCII, Control-1, and Latin-1 in a stream of 8-bit bytes. Thus, an encoding can be viewed as a way of encoding characters from a specified group of character sets using a stream of bytes, each of which contains a fixed number of bits (but not necessarily 8, as in the common usage of "byte"). Here are descriptions of a couple of common encodings: A. Japanese EUC (Extended Unix Code) This encompasses the character sets: - Printing-ASCII, - Katakana-JISX0201 (half-width katakana, the right half of JISX0201). - Japanese-JISX0208 - Japanese-JISX0212 It uses 8-bit bytes. Note that Printing-ASCII and Katakana-JISX0201 are 94-character charsets, while Japanese-JISX0208 is a 94x94-character charset. The encoding is as follows: Character set Representation (PC == position-code) ------------- -------------- Printing-ASCII PC1 Japanese-JISX0208 PC1 + 0x80 | PC2 + 0x80 Katakana-JISX0201 0x8E | PC1 + 0x80 B. JIS7 This encompasses the character sets: - Printing-ASCII - Latin-JISX0201 (the left half of JISX0201; this character set is very similar to Printing-ASCII and is a 94-character charset) - Japanese-JISX0208 - Katakana-JISX0201 It uses 7-bit bytes. Unlike Japanese EUC, this is a "modal" encoding, which means that there are multiple states that the encoding can be in, which affect how the bytes are to be interpreted. Special sequences of bytes (called "escape sequences") are used to change states. The encoding is as follows: Character set Representation ------------- -------------- Printing-ASCII PC1 Latin-JISX0201 PC1 Katakana-JISX0201 PC1 Japanese-JISX0208 PC1 | PC2 Escape sequence ASCII equivalent Meaning --------------- ---------------- ------- 0x1B 0x28 0x42 ESC ( B invoke Printing-ASCII 0x1B 0x28 0x4A ESC ( J invoke Latin-JISX0201 0x1B 0x28 0x49 ESC ( I invoke Katakana-JISX0201 0x1B 0x24 0x42 ESC $ B invoke Japanese-JISX0208 Initially, Printing-ASCII is invoked. 3. Internal Mule Encodings ========================== In XEmacs/Mule, each character set is assigned a unique number, called a "leading byte". This is used in the encodings of a character. Leading bytes are in the range 0x80 - 0xFF (except for ASCII, which has a leading byte of 0), although some leading bytes are reserved. Charsets whose leading byte is in the range 0x80 - 0x9F are called "official" and are used for built-in charsets. Other charsets are called "private" and have leading bytes in the range 0xA0 - 0xFF; these are user-defined charsets. More specifically: Character set Leading byte ------------- ------------ ASCII 0 Composite 0x80 Dimension-1 Official 0x81 - 0x8D (0x8E is free) Control 0x8F Dimension-2 Official 0x90 - 0x99 (0x9A - 0x9D are free; 0x9E and 0x9F are reserved) Dimension-1 Private 0xA0 - 0xEF Dimension-2 Private 0xF0 - 0xFF There are two internal encodings for characters in XEmacs/Mule. One is called "string encoding" and is an 8-bit encoding that is used for representing characters in a buffer or string. It uses 1 to 4 bytes per character. The other is called "character encoding" and is a 19-bit encoding that is used for representing characters individually in a variable. (In the following descriptions, we'll ignore composite characters for the moment. We also give a general (structural) overview first, followed later by the exact details.) A. Internal String Encoding ASCII characters are encoded using their position code directly. Other characters are encoded using their leading byte followed by their position code(s) with the high bit set. Characters in private character sets have their leading byte prefixed with a "leading byte prefix", which is either 0x9E or 0x9F. (No character sets are ever assigned these leading bytes.) Specifically: Character set Encoding (PC == position-code) ------------- -------- (LB == leading-byte) ASCII PC1 | Control-1 LB | PC1 + 0xA0 Dimension-1 official LB | PC1 + 0x80 Dimension-1 private 0x9E | LB | PC1 + 0x80 Dimension-2 official LB | PC1 | PC2 + 0x80 Dimension-2 private 0x9F | LB | PC1 + 0x80 | PC2 + 0x80 The basic characteristic of this encoding is that the first byte of all characters is in the range 0x00 - 0x9F, and the second and following bytes of all characters is in the range 0xA0 - 0xFF. This means that it is impossible to get out of sync, or more specifically: 1. Given any byte position, the beginning of the character it is within can be determined in constant time. 2. Given any byte position at the beginning of a character, the beginning of the next character can be determined in constant time. 3. Given any byte position at the beginning of a character, the beginning of the previous character can be determined in constant time. 4. Textual searches can simply treat encoded strings as if they were encoded in a one-byte-per-character fashion rather than the actual multi-byte encoding. None of the standard non-modal encodings meet all of these conditions. For example, EUC satisfies only (2) and (3), while Shift-JIS and Big5 (not yet described) satisfy only (2). (All non-modal encodings must satisfy (2), in order to be unambiguous.) B. Internal Character Encoding One 19-bit word represents a single character. The word is separated into three fields: Bit number: 18 17 16 15 14 13 12 11 10 09 08 07 06 05 04 03 02 01 00 <------------> <------------------> <------------------> Field: 1 2 3 Note that fields 2 and 3 hold 7 bits each, while field 1 holds 5 bits. Character set Field 1 Field 2 Field 3 ------------- ------- ------- ------- ASCII 0 0 PC1 range: (00 - 7F) Control-1 0 1 PC1 range: (00 - 1F) Dimension-1 official 0 LB - 0x80 PC1 range: (01 - 0D) (20 - 7F) Dimension-1 private 0 LB - 0x80 PC1 range: (20 - 6F) (20 - 7F) Dimension-2 official LB - 0x8F PC1 PC2 range: (01 - 0A) (20 - 7F) (20 - 7F) Dimension-2 private LB - 0xE1 PC1 PC2 range: (0F - 1E) (20 - 7F) (20 - 7F) Composite 0x1F ? ? Note that character codes 0 - 255 are the same as the "binary encoding" described above. */ /* About Unicode support: Adding Unicode support is very desirable. Unicode will likely be a very common representation in the future, and thus we should represent Unicode characters using three bytes instead of four. This means we need to find leading bytes for Unicode. Given that there are 65,536 characters in Unicode and we can attach 96x96 = 9,216 characters per leading byte, we need eight leading bytes for Unicode. We currently have four free (0x9A - 0x9D), and with a little bit of rearranging we can get five: ASCII doesn't really need to take up a leading byte. (We could just as well use 0x7F, with a little change to the functions that assume that 0x80 is the lowest leading byte.) This means we still need to dump three leading bytes and move them into private space. The CNS charsets are good candidates since they are rarely used, and JAPANESE_JISX0208_1978 is becoming less and less used and could also be dumped. */ /************************************************************************/ /* Definition of leading bytes */ /************************************************************************/ #define MIN_LEADING_BYTE 0x80 /* These need special treatment in a string and/or character */ #define LEADING_BYTE_ASCII 0x8E /* Omitted in a buffer */ #ifdef ENABLE_COMPOSITE_CHARS #endif #define LEADING_BYTE_COMPOSITE 0x80 /* for a composite character */ #define LEADING_BYTE_CONTROL_1 0x8F /* represent normal 80-9F */ /* Note the gap in each official charset can cause core dump as first and last values are used to determine whether charset is defined or not in non_ascii_valid_char_p */ /** The following are for 1-byte characters in an official charset. **/ enum LEADING_BYTE_OFFICIAL_1 { LEADING_BYTE_LATIN_ISO8859_1 = 0x81, /* Right half of ISO 8859-1 */ LEADING_BYTE_LATIN_ISO8859_2, /* 0x82 Right half of ISO 8859-2 */ LEADING_BYTE_LATIN_ISO8859_3, /* 0x83 Right half of ISO 8859-3 */ LEADING_BYTE_LATIN_ISO8859_4, /* 0x84 Right half of ISO 8859-4 */ LEADING_BYTE_THAI_TIS620, /* 0x85 TIS620-2533 */ LEADING_BYTE_GREEK_ISO8859_7, /* 0x86 Right half of ISO 8859-7 */ LEADING_BYTE_ARABIC_ISO8859_6, /* 0x87 Right half of ISO 8859-6 */ LEADING_BYTE_HEBREW_ISO8859_8, /* 0x88 Right half of ISO 8859-8 */ LEADING_BYTE_KATAKANA_JISX0201, /* 0x89 Right half of JIS X0201-1976 */ LEADING_BYTE_LATIN_JISX0201, /* 0x8A Left half of JIS X0201-1976 */ LEADING_BYTE_CYRILLIC_ISO8859_5,/* 0x8B Right half of ISO 8859-5 */ LEADING_BYTE_LATIN_ISO8859_9 /* 0x8C Right half of ISO 8859-9 */ /* 0x8D unused */ }; #define MIN_LEADING_BYTE_OFFICIAL_1 LEADING_BYTE_LATIN_ISO8859_1 #define MAX_LEADING_BYTE_OFFICIAL_1 LEADING_BYTE_LATIN_ISO8859_9 /** The following are for 2-byte characters in an official charset. **/ enum LEADING_BYTE_OFFICIAL_2 { LEADING_BYTE_JAPANESE_JISX0208_1978 = 0x90, /* Japanese JIS X0208-1978 */ LEADING_BYTE_CHINESE_GB2312, /* 0x91 Chinese Hanzi GB2312-1980 */ LEADING_BYTE_JAPANESE_JISX0208, /* 0x92 Japanese JIS X0208-1983 */ LEADING_BYTE_KOREAN_KSC5601, /* 0x93 Hangul KS C5601-1987 */ LEADING_BYTE_JAPANESE_JISX0212, /* 0x94 Japanese JIS X0212-1990 */ LEADING_BYTE_CHINESE_CNS11643_1, /* 0x95 Chinese CNS11643 Set 1 */ LEADING_BYTE_CHINESE_CNS11643_2, /* 0x96 Chinese CNS11643 Set 2 */ LEADING_BYTE_CHINESE_BIG5_1, /* 0x97 Big5 Level 1 */ LEADING_BYTE_CHINESE_BIG5_2 /* 0x98 Big5 Level 2 */ /* 0x99 unused */ /* 0x9A unused */ /* 0x9B unused */ /* 0x9C unused */ }; #define MIN_LEADING_BYTE_OFFICIAL_2 LEADING_BYTE_JAPANESE_JISX0208_1978 #define MAX_LEADING_BYTE_OFFICIAL_2 LEADING_BYTE_CHINESE_BIG5_2 /** The following are for 1- and 2-byte characters in a private charset. **/ #define PRE_LEADING_BYTE_PRIVATE_1 0x9E /* 1-byte char-set */ #define PRE_LEADING_BYTE_PRIVATE_2 0x9F /* 2-byte char-set */ #define MIN_LEADING_BYTE_PRIVATE_1 0xA0 #define MAX_LEADING_BYTE_PRIVATE_1 0xEF #define MIN_LEADING_BYTE_PRIVATE_2 0xF0 #define MAX_LEADING_BYTE_PRIVATE_2 0xFF #define NUM_LEADING_BYTES 128 /************************************************************************/ /* Operations on leading bytes */ /************************************************************************/ /* Is this leading byte for a private charset? */ #define LEADING_BYTE_PRIVATE_P(lb) ((lb) >= MIN_LEADING_BYTE_PRIVATE_1) /* Is this a prefix for a private leading byte? */ INLINE_HEADER int LEADING_BYTE_PREFIX_P (Bufbyte lb); INLINE_HEADER int LEADING_BYTE_PREFIX_P (Bufbyte lb) { return (lb == PRE_LEADING_BYTE_PRIVATE_1 || lb == PRE_LEADING_BYTE_PRIVATE_2); } /* Given a private leading byte, return the leading byte prefix stored in a string. */ #define PRIVATE_LEADING_BYTE_PREFIX(lb) \ ((unsigned int) (lb) < MIN_LEADING_BYTE_PRIVATE_2 ? \ PRE_LEADING_BYTE_PRIVATE_1 : \ PRE_LEADING_BYTE_PRIVATE_2) /************************************************************************/ /* Operations on individual bytes */ /* of any format */ /************************************************************************/ /* These are carefully designed to work if BYTE is signed or unsigned. */ /* Note that SPC and DEL are considered ASCII, not control. */ #define BYTE_ASCII_P(byte) (((byte) & ~0x7f) == 0) #define BYTE_C0_P(byte) (((byte) & ~0x1f) == 0) #define BYTE_C1_P(byte) (((byte) & ~0x1f) == 0x80) /************************************************************************/ /* Operations on individual bytes */ /* in a Mule-formatted string */ /************************************************************************/ /* Does BYTE represent the first byte of a character? */ #define BUFBYTE_FIRST_BYTE_P(byte) ((byte) < 0xA0) /* Does BYTE represent the first byte of a multi-byte character? */ #define BUFBYTE_LEADING_BYTE_P(byte) BYTE_C1_P (byte) /************************************************************************/ /* Information about a particular character set */ /************************************************************************/ struct Lisp_Charset { struct lcrecord_header header; int id; Lisp_Object name; Lisp_Object doc_string; Lisp_Object registry; Lisp_Object short_name; Lisp_Object long_name; Lisp_Object reverse_direction_charset; Lisp_Object ccl_program; /* Final byte of this character set in ISO2022 designating escape sequence */ Bufbyte final; /* Number of bytes (1 - 4) required in the internal representation for characters in this character set. This is *not* the same as the dimension of the character set). */ unsigned int rep_bytes; /* Number of columns a character in this charset takes up, on TTY devices. Not used for X devices. */ unsigned int columns; /* Direction of this character set */ unsigned int direction; /* Type of this character set (94, 96, 94x94, 96x96) */ unsigned int type; /* Number of bytes used in encoding of this character set (1 or 2) */ unsigned int dimension; /* Number of chars in each dimension (usually 94 or 96) */ unsigned int chars; /* Which half of font to be used to display this character set */ unsigned int graphic; }; typedef struct Lisp_Charset Lisp_Charset; DECLARE_LRECORD (charset, Lisp_Charset); #define XCHARSET(x) XRECORD (x, charset, Lisp_Charset) #define XSETCHARSET(x, p) XSETRECORD (x, p, charset) #define CHARSETP(x) RECORDP (x, charset) #define CHECK_CHARSET(x) CHECK_RECORD (x, charset) #define CONCHECK_CHARSET(x) CONCHECK_RECORD (x, charset) #define CHARSET_TYPE_94 0 /* This charset includes 94 characters. */ #define CHARSET_TYPE_96 1 /* This charset includes 96 characters. */ #define CHARSET_TYPE_94X94 2 /* This charset includes 94x94 characters. */ #define CHARSET_TYPE_96X96 3 /* This charset includes 96x96 characters. */ #define CHARSET_LEFT_TO_RIGHT 0 #define CHARSET_RIGHT_TO_LEFT 1 /* Leading byte and id have been regrouped. -- OG */ #define CHARSET_ID(cs) ((cs)->id) #define CHARSET_LEADING_BYTE(cs) ((Bufbyte) CHARSET_ID(cs)) #define CHARSET_NAME(cs) ((cs)->name) #define CHARSET_SHORT_NAME(cs) ((cs)->short_name) #define CHARSET_LONG_NAME(cs) ((cs)->long_name) #define CHARSET_REP_BYTES(cs) ((cs)->rep_bytes) #define CHARSET_COLUMNS(cs) ((cs)->columns) #define CHARSET_GRAPHIC(cs) ((cs)->graphic) #define CHARSET_TYPE(cs) ((cs)->type) #define CHARSET_DIRECTION(cs) ((cs)->direction) #define CHARSET_FINAL(cs) ((cs)->final) #define CHARSET_DOC_STRING(cs) ((cs)->doc_string) #define CHARSET_REGISTRY(cs) ((cs)->registry) #define CHARSET_CCL_PROGRAM(cs) ((cs)->ccl_program) #define CHARSET_DIMENSION(cs) ((cs)->dimension) #define CHARSET_CHARS(cs) ((cs)->chars) #define CHARSET_REVERSE_DIRECTION_CHARSET(cs) ((cs)->reverse_direction_charset) #define CHARSET_PRIVATE_P(cs) LEADING_BYTE_PRIVATE_P (CHARSET_LEADING_BYTE (cs)) #define XCHARSET_ID(cs) CHARSET_ID (XCHARSET (cs)) #define XCHARSET_NAME(cs) CHARSET_NAME (XCHARSET (cs)) #define XCHARSET_SHORT_NAME(cs) CHARSET_SHORT_NAME (XCHARSET (cs)) #define XCHARSET_LONG_NAME(cs) CHARSET_LONG_NAME (XCHARSET (cs)) #define XCHARSET_REP_BYTES(cs) CHARSET_REP_BYTES (XCHARSET (cs)) #define XCHARSET_COLUMNS(cs) CHARSET_COLUMNS (XCHARSET (cs)) #define XCHARSET_GRAPHIC(cs) CHARSET_GRAPHIC (XCHARSET (cs)) #define XCHARSET_TYPE(cs) CHARSET_TYPE (XCHARSET (cs)) #define XCHARSET_DIRECTION(cs) CHARSET_DIRECTION (XCHARSET (cs)) #define XCHARSET_FINAL(cs) CHARSET_FINAL (XCHARSET (cs)) #define XCHARSET_DOC_STRING(cs) CHARSET_DOC_STRING (XCHARSET (cs)) #define XCHARSET_REGISTRY(cs) CHARSET_REGISTRY (XCHARSET (cs)) #define XCHARSET_LEADING_BYTE(cs) CHARSET_LEADING_BYTE (XCHARSET (cs)) #define XCHARSET_CCL_PROGRAM(cs) CHARSET_CCL_PROGRAM (XCHARSET (cs)) #define XCHARSET_DIMENSION(cs) CHARSET_DIMENSION (XCHARSET (cs)) #define XCHARSET_CHARS(cs) CHARSET_CHARS (XCHARSET (cs)) #define XCHARSET_PRIVATE_P(cs) CHARSET_PRIVATE_P (XCHARSET (cs)) #define XCHARSET_REVERSE_DIRECTION_CHARSET(cs) \ CHARSET_REVERSE_DIRECTION_CHARSET (XCHARSET (cs)) struct charset_lookup { /* Table of charsets indexed by leading byte. */ Lisp_Object charset_by_leading_byte[128]; /* Table of charsets indexed by type/final-byte/direction. */ Lisp_Object charset_by_attributes[4][128][2]; Bufbyte next_allocated_1_byte_leading_byte; Bufbyte next_allocated_2_byte_leading_byte; }; INLINE_HEADER Lisp_Object CHARSET_BY_LEADING_BYTE (Bufbyte lb); INLINE_HEADER Lisp_Object CHARSET_BY_LEADING_BYTE (Bufbyte lb) { extern struct charset_lookup *chlook; #ifdef ERROR_CHECK_TYPECHECK /* When error-checking is on, x86 GCC 2.95.2 -O3 miscompiles the following unless we introduce `tem'. */ int tem = lb; type_checking_assert (tem >= 0x80 && tem <= 0xFF); #endif return chlook->charset_by_leading_byte[lb - 128]; } INLINE_HEADER Lisp_Object CHARSET_BY_ATTRIBUTES (unsigned int type, unsigned char final, int dir); INLINE_HEADER Lisp_Object CHARSET_BY_ATTRIBUTES (unsigned int type, unsigned char final, int dir) { extern struct charset_lookup *chlook; type_checking_assert (type < countof (chlook->charset_by_attributes) && final < countof (chlook->charset_by_attributes[0]) && dir < countof (chlook->charset_by_attributes[0][0])); return chlook->charset_by_attributes[type][final][dir]; } /* Table of number of bytes in the string representation of a character indexed by the first byte of that representation. This value can be derived in other ways -- e.g. something like XCHARSET_REP_BYTES (CHARSET_BY_LEADING_BYTE (first_byte)) but it's faster this way. */ extern const Bytecount rep_bytes_by_first_byte[0xA0]; /* Number of bytes in the string representation of a character. */ INLINE_HEADER int REP_BYTES_BY_FIRST_BYTE (Bufbyte fb); INLINE_HEADER int REP_BYTES_BY_FIRST_BYTE (Bufbyte fb) { type_checking_assert (fb < 0xA0); return rep_bytes_by_first_byte[fb]; } /************************************************************************/ /* Dealing with characters */ /************************************************************************/ /* Is this character represented by more than one byte in a string? */ #define CHAR_MULTIBYTE_P(c) ((c) >= 0x80) #define CHAR_ASCII_P(c) (!CHAR_MULTIBYTE_P (c)) /* The bit fields of character are divided into 3 parts: FIELD1(5bits):FIELD2(7bits):FIELD3(7bits) */ #define CHAR_FIELD1_MASK (0x1F << 14) #define CHAR_FIELD2_MASK (0x7F << 7) #define CHAR_FIELD3_MASK 0x7F /* Macros to access each field of a character code of C. */ #define CHAR_FIELD1(c) (((c) & CHAR_FIELD1_MASK) >> 14) #define CHAR_FIELD2(c) (((c) & CHAR_FIELD2_MASK) >> 7) #define CHAR_FIELD3(c) ((c) & CHAR_FIELD3_MASK) /* Field 1, if non-zero, usually holds a leading byte for a dimension-2 charset. Field 2, if non-zero, usually holds a leading byte for a dimension-1 charset. */ /* Converting between field values and leading bytes. */ #define FIELD2_TO_OFFICIAL_LEADING_BYTE 0x80 #define FIELD2_TO_PRIVATE_LEADING_BYTE 0x80 #define FIELD1_TO_OFFICIAL_LEADING_BYTE 0x8F #define FIELD1_TO_PRIVATE_LEADING_BYTE 0xE1 /* Minimum and maximum allowed values for the fields. */ #define MIN_CHAR_FIELD2_OFFICIAL \ (MIN_LEADING_BYTE_OFFICIAL_1 - FIELD2_TO_OFFICIAL_LEADING_BYTE) #define MAX_CHAR_FIELD2_OFFICIAL \ (MAX_LEADING_BYTE_OFFICIAL_1 - FIELD2_TO_OFFICIAL_LEADING_BYTE) #define MIN_CHAR_FIELD1_OFFICIAL \ (MIN_LEADING_BYTE_OFFICIAL_2 - FIELD1_TO_OFFICIAL_LEADING_BYTE) #define MAX_CHAR_FIELD1_OFFICIAL \ (MAX_LEADING_BYTE_OFFICIAL_2 - FIELD1_TO_OFFICIAL_LEADING_BYTE) #define MIN_CHAR_FIELD2_PRIVATE \ (MIN_LEADING_BYTE_PRIVATE_1 - FIELD2_TO_PRIVATE_LEADING_BYTE) #define MAX_CHAR_FIELD2_PRIVATE \ (MAX_LEADING_BYTE_PRIVATE_1 - FIELD2_TO_PRIVATE_LEADING_BYTE) #define MIN_CHAR_FIELD1_PRIVATE \ (MIN_LEADING_BYTE_PRIVATE_2 - FIELD1_TO_PRIVATE_LEADING_BYTE) #define MAX_CHAR_FIELD1_PRIVATE \ (MAX_LEADING_BYTE_PRIVATE_2 - FIELD1_TO_PRIVATE_LEADING_BYTE) /* Minimum character code of each character. */ #define MIN_CHAR_OFFICIAL_TYPE9N (MIN_CHAR_FIELD2_OFFICIAL << 7) #define MIN_CHAR_PRIVATE_TYPE9N (MIN_CHAR_FIELD2_PRIVATE << 7) #define MIN_CHAR_OFFICIAL_TYPE9NX9N (MIN_CHAR_FIELD1_OFFICIAL << 14) #define MIN_CHAR_PRIVATE_TYPE9NX9N (MIN_CHAR_FIELD1_PRIVATE << 14) #define MIN_CHAR_COMPOSITION (0x1F << 14) /* Leading byte of a character. NOTE: This takes advantage of the fact that FIELD2_TO_OFFICIAL_LEADING_BYTE and FIELD2_TO_PRIVATE_LEADING_BYTE are the same. */ INLINE_HEADER Bufbyte CHAR_LEADING_BYTE (Emchar c); INLINE_HEADER Bufbyte CHAR_LEADING_BYTE (Emchar c) { if (CHAR_ASCII_P (c)) return LEADING_BYTE_ASCII; else if (c < 0xA0) return LEADING_BYTE_CONTROL_1; else if (c < MIN_CHAR_OFFICIAL_TYPE9NX9N) return CHAR_FIELD2 (c) + FIELD2_TO_OFFICIAL_LEADING_BYTE; else if (c < MIN_CHAR_PRIVATE_TYPE9NX9N) return CHAR_FIELD1 (c) + FIELD1_TO_OFFICIAL_LEADING_BYTE; else if (c < MIN_CHAR_COMPOSITION) return CHAR_FIELD1 (c) + FIELD1_TO_PRIVATE_LEADING_BYTE; else { #ifdef ENABLE_COMPOSITE_CHARS return LEADING_BYTE_COMPOSITE; #else ABORT(); return 0; #endif /* ENABLE_COMPOSITE_CHARS */ } } #define CHAR_CHARSET(c) CHARSET_BY_LEADING_BYTE (CHAR_LEADING_BYTE (c)) /* Return a character whose charset is CHARSET and position-codes are C1 and C2. TYPE9N character ignores C2. NOTE: This takes advantage of the fact that FIELD2_TO_OFFICIAL_LEADING_BYTE and FIELD2_TO_PRIVATE_LEADING_BYTE are the same. */ INLINE_HEADER Emchar MAKE_CHAR (Lisp_Object charset, int c1, int c2); INLINE_HEADER Emchar MAKE_CHAR (Lisp_Object charset, int c1, int c2) { if (EQ (charset, Vcharset_ascii)) return c1; else if (EQ (charset, Vcharset_control_1)) return c1 | 0x80; #ifdef ENABLE_COMPOSITE_CHARS else if (EQ (charset, Vcharset_composite)) return (0x1F << 14) | ((c1) << 7) | (c2); #endif else if (XCHARSET_DIMENSION (charset) == 1) return ((XCHARSET_LEADING_BYTE (charset) - FIELD2_TO_OFFICIAL_LEADING_BYTE) << 7) | (c1); else if (!XCHARSET_PRIVATE_P (charset)) return ((XCHARSET_LEADING_BYTE (charset) - FIELD1_TO_OFFICIAL_LEADING_BYTE) << 14) | ((c1) << 7) | (c2); else return ((XCHARSET_LEADING_BYTE (charset) - FIELD1_TO_PRIVATE_LEADING_BYTE) << 14) | ((c1) << 7) | (c2); } /* The charset of character C is set to CHARSET, and the position-codes of C are set to C1 and C2. C2 of TYPE9N character is 0. */ /* BREAKUP_CHAR_1_UNSAFE assumes that the charset has already been calculated, and just computes c1 and c2. BREAKUP_CHAR also computes and stores the charset. */ #define BREAKUP_CHAR_1_UNSAFE(c, charset, c1, c2) \ XCHARSET_DIMENSION (charset) == 1 \ ? ((c1) = CHAR_FIELD3 (c), (c2) = 0) \ : ((c1) = CHAR_FIELD2 (c), \ (c2) = CHAR_FIELD3 (c)) INLINE_HEADER void breakup_char_1 (Emchar c, Lisp_Object *charset, int *c1, int *c2); INLINE_HEADER void breakup_char_1 (Emchar c, Lisp_Object *charset, int *c1, int *c2) { *charset = CHAR_CHARSET (c); BREAKUP_CHAR_1_UNSAFE (c, *charset, *c1, *c2); } #define BREAKUP_CHAR(c, charset, c1, c2) \ breakup_char_1 (c, &(charset), &(c1), &(c2)) #ifdef ENABLE_COMPOSITE_CHARS /************************************************************************/ /* Composite characters */ /************************************************************************/ Emchar lookup_composite_char (Bufbyte *str, int len); Lisp_Object composite_char_string (Emchar ch); #endif /* ENABLE_COMPOSITE_CHARS */ /************************************************************************/ /* Exported functions */ /************************************************************************/ EXFUN (Ffind_charset, 1); EXFUN (Fget_charset, 1); extern Lisp_Object Vcharset_chinese_big5_1; extern Lisp_Object Vcharset_chinese_big5_2; extern Lisp_Object Vcharset_japanese_jisx0208; Emchar Lstream_get_emchar_1 (Lstream *stream, int first_char); int Lstream_fput_emchar (Lstream *stream, Emchar ch); void Lstream_funget_emchar (Lstream *stream, Emchar ch); int copy_internal_to_external (const Bufbyte *internal, Bytecount len, unsigned char *external); Bytecount copy_external_to_internal (const unsigned char *external, int len, Bufbyte *internal); #endif /* INCLUDED_mule_charset_h_ */