Compiled for CPU model: 0x000d0708
CPU Model: CN5230p2.0-700-SCP
CPU clock: 700MHz  Core Mask: 0xf
Board: CUST_LANNER_MR730
Board Type: 10021  Revision: 1/0
Serial number: 2010081008326
MAC address base: 00:90:0b:1a:69:7a (6 configured)
Cache info:
  picache_stride    = 4096
  picache_loopcount = 8
  pdcache_stride    = 256
  pdcache_loopcount = 64
cpu0: Cavium processor v8.7
  MMU: Standard TLB, 64 entries
  L1 i-cache: 4 ways of 64 sets, 128 bytes per line
  L1 d-cache: 64 ways of 2 sets, 128 bytes per line
  Config1=0xfe3303da<COP2,PerfCount,WatchRegs,EJTAG>
  Config3=0x1080
Physical memory chunk(s):
0xf25000 - 0x8024fff, 118489088 bytes (28928 pages)
0x81c2000 - 0xffc1fff, 132120576 bytes (32256 pages)
0x20000000 - 0x7fffffff, 1610612736 bytes (393216 pages)
0x410000000 - 0x41fffffff, 268435456 bytes (65536 pages)
Maxmem is 0x420000000
pcpu is available at virtual address 0xc000000000000000.
KDB: debugger backends: ddb
KDB: current backend: ddb
Octeon SDK: Cavium Inc. OCTEON SDK version 2.3.0, build 427
Available Octeon features: SAAD CRYPTO PCIE TRA MGMT_PORT RAID USB NO_WPTR MDIO_CLAUSE_45 NPEI NAND
Copyright (c) 1992-2013 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 10.0-CURRENT #53 r246255M: Sat Feb  2 10:55:35 PST 2013
    juli@bansh:/home/juli/freebsd-src/obj/mips.mips64/home/juli/freebsd-src/sys/OCTEON1 mips
gcc version 4.2.1 20070831 patched [FreeBSD]
Preloaded elf kernel "kernel" at 0xffffffff80f006b0.
Create COP2 context zone
real memory  = 2129657856 (2079744K bytes)
Physical memory chunk(s):
0x01042000 - 0x08024fff, 117321728 bytes (28643 pages)
0x081c2000 - 0x0ffc1fff, 132120576 bytes (32256 pages)
0x20000000 - 0x7c3c2fff, 1547448320 bytes (377795 pages)
0x410000000 - 0x41fffffff, 268435456 bytes (65536 pages)
avail memory = 2052882432 (1957MB)
AP #1 started!
AP #2 started!
AP #3 started!
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
random device not loaded; using insecure entropy
ULE: setup cpu 0
ULE: setup cpu 1
ULE: setup cpu 2
ULE: setup cpu 3
wlan: <802.11 Link Layer>
null: <null device, zero device>
random: <entropy source, Software, Yarrow>
nfslock: pseudo-device
crypto: <crypto core>
mem: <memory>
nexus0: <MIPS32 root nexus>
Compact flash found in bootbus region 3 (CF 16-bit).
cf0: <Octeon Compact Flash Driver> on nexus0
    model TRANSCEND                               
    heads 16 tracks 3949 sec_tracks 63 sectors 3980604
clock0: <Generic MIPS32 ticker> on nexus0
Timecounter "MIPS32" frequency 700000000 Hz quality 800
Event timer "MIPS32" frequency 700000000 Hz quality 800
rnd0: <Cavium Octeon Random Number Generator> on nexus0
cryptocteon0: <Octeon Secure Coprocessor> on nexus0
crypto: assign cryptocteon0 driver id 0, flags 83886080
crypto: cryptocteon0 registers alg 6 flags 0 maxoplen 0
crypto: cryptocteon0 registers alg 7 flags 0 maxoplen 0
crypto: cryptocteon0 registers alg 1 flags 0 maxoplen 0
crypto: cryptocteon0 registers alg 2 flags 0 maxoplen 0
crypto: cryptocteon0 registers alg 11 flags 0 maxoplen 0
cryptosoft0: <software crypto> on nexus0
crypto: assign cryptosoft0 driver id 1, flags 100663296
crypto: cryptosoft0 registers alg 1 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 2 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 3 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 4 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 5 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 16 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 6 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 7 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 18 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 19 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 20 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 8 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 15 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 9 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 10 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 13 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 14 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 11 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 22 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 21 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 17 flags 0 maxoplen 0
ciu0: <Cavium Octeon Central Interrupt Unit> on nexus0
obio0 on ciu0
uart1: <Octeon-16550 channel 1> on obio0
uart1: fast interrupt
uart1: console (115200,n,8,1)
uart0: <Octeon-16550 channel 0> on obio0
uart0: fast interrupt
uart0: console (115200,n,8,1)
octm0: <Cavium Octeon Management Ethernet> on ciu0
octm0: [GIANT-LOCKED]
octm0: bpf attached
octm0: Ethernet address: 00:90:0b:1a:69:7a
octm1: <Cavium Octeon Management Ethernet> on ciu0
octm1: [GIANT-LOCKED]
octm1: bpf attached
octm1: Ethernet address: 00:90:0b:1a:69:7b
octebus0: <Cavium Octeon Ethernet pseudo-bus> on ciu0
Interface 0 has 4 ports (SGMII)
Warning: Enabling IPD when IPD already enabled.
Warning: Enabling PKO when PKO already enabled.
octe0: <Cavium Octeon SGMII Ethernet> on octebus0
miibus0: <MII bus> on octe0
brgphy0: <BCM5482 1000BASE-T media interface> PHY 0 on miibus0
brgphy0: OUI 0x000af7, model 0x000b, rev. 2
brgphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto
octe0: bpf attached
octe0: Ethernet address: 00:90:0b:1a:69:7c
octe1: <Cavium Octeon SGMII Ethernet> on octebus0
miibus1: <MII bus> on octe1
brgphy1: <BCM5482 1000BASE-T media interface> PHY 1 on miibus1
brgphy1: OUI 0x000af7, model 0x000b, rev. 2
brgphy1:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto
octe1: bpf attached
octe1: Ethernet address: 00:90:0b:1a:69:7d
octe2: <Cavium Octeon SGMII Ethernet> on octebus0
miibus2: <MII bus> on octe2
brgphy2: <BCM5482 1000BASE-T media interface> PHY 2 on miibus2
brgphy2: OUI 0x000af7, model 0x000b, rev. 2
brgphy2:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto
octe2: bpf attached
octe2: Ethernet address: 00:90:0b:1a:69:7e
octe3: <Cavium Octeon SGMII Ethernet> on octebus0
miibus3: <MII bus> on octe3
brgphy3: <BCM5482 1000BASE-T media interface> PHY 3 on miibus3
brgphy3: OUI 0x000af7, model 0x000b, rev. 2
brgphy3:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto
octe3: bpf attached
octe3: Ethernet address: 00:90:0b:1a:69:7f
pcib0: <Cavium Octeon PCIe bridge> on ciu0
PCIe: Port 0 link active, 1 lanes
pci0: <PCI bus> on pcib0
pci0: domain=0, physical bus=1
found->	vendor=0x1095, dev=0x3132, revid=0x01
	domain=0, bus=1, slot=0, func=0
	class=01-80-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=0
	powerspec 2  supports D0 D1 D2 D3  current D0
	MSI supports 1 message, 64 bit
	map[10]: type Memory, range 64, base 0xf0000000, size  7, enabled
	map[18]: type Memory, range 64, base 0xf0014000, size 14, enabled
	map[20]: type I/O Port, range 32, base 0x4000, size  7, enabled
siis0: <SiI3132 SATA controller> port 0x4000-0x407f mem 0xf0000000-0xf000007f,0xf0014000-0xf0017fff irq 44 at device 0.0 on pci0
siisch0: <SIIS channel> at channel 0 on siis0
siisch1: <SIIS channel> at channel 1 on siis0
pcib1: <Cavium Octeon PCIe bridge> on ciu0
PCIe: Port 1 link timeout
PCIe: Failed to initialize port 1, probably the slot is empty
pcib1: Failed to put PCIe bus in host mode.
device_attach: pcib1 attach returned 6
octusb0: <Cavium Octeon USB controller> on ciu0
usbus0 on octusb0
octusb0: usbpf: Attached
Device configuration finished.
procfs registered
Timecounter "Octeon" frequency 700000000 Hz quality 900
Timecounters tick every 10.000 msec
crypto: <crypto device>
vlan: initialized, using hash tables with chaining
tcp_init: net.inet.tcp.tcbhashsize auto tuned to 16384
lo0: bpf attached
siisch1: CONNECT requested
siisch1: SIIS reset...
siisch1: SATA connect time=100us status=00000123
siisch1: SIIS reset done: devices=00000001
(noperiph:siisch1:0:-1:-1): rescan already queued
usbus0: 480Mbps High Speed USB v2.0
siisch0: SIIS reset...
siisch0: SATA connect timeout time=10000us status=00000000
siisch0: SIIS reset done: phy reset found no device
ugen0.1: <Cavium Networks> at usbus0
uhub0: <Cavium Networks OCTUSB Root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0
pass0 at siisch1 bus 0 scbus1 target 0 lun 0
pass0: <Hitachi HTS545050A7E380 GG2OA600> ATA-8 SATA 2.x device
pass0: Serial Number TA5511GZGTZ79H
pass0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
pass0: Command Queueing enabled
ada0 at siisch1 bus 0 scbus1 target 0 lun 0
ada0: <Hitachi HTS545050A7E380 GG2OA600> ATA-8 SATA 2.x device
ada0: Serial Number TA5511GZGTZ79H
ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
ada0: Command Queueing enabled
ada0: 476940MB (976773168 512 byte sectors: 16H 63S/T 16383C)
ada0: Previously was known as ad6
GEOM: new disk ada0
SMP: AP CPU #3 launched.
SMP: AP CPU #1 launched.
SMP: AP CPU #2 launched.
uhub0: 2 ports with 2 removable, self powered