SMAP type=01 base=0000000000000000 len=000000000009dc00 SMAP type=02 base=000000000009dc00 len=0000000000002400 SMAP type=02 base=00000000000e0000 len=0000000000020000 SMAP type=01 base=0000000000100000 len=00000000d7efcf00 SMAP type=03 base=00000000d7ffcf00 len=0000000000003100 SMAP type=01 base=0000000100000000 len=0000000028000000 SMAP type=02 base=00000000fec00000 len=0000000001400000 Copyright (c) 1992-2006 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 6.1-PRERELEASE #0: Tue Apr 4 01:16:17 EDT 2006 jkim@xxxxxx.xxx:/usr/home/jkim/r6/src/amd64/compile/SMP Preloaded elf kernel "/boot/kernel/kernel.6_1" at 0xffffffff809a7000. INTR: Adding local APIC 0 as a target ACPI APIC Table: Calibrating clock(s) ... i8254 clock: 1193165 Hz CLK_USE_I8254_CALIBRATION not specified - using default frequency Timecounter "i8254" frequency 1193182 Hz quality 0 Calibrating TSC clock ... TSC clock: 3000132540 Hz CPU: Intel(R) Xeon(TM) CPU 3.00GHz (3000.13-MHz K8-class CPU) Origin = "GenuineIntel" Id = 0xf34 Stepping = 4 Features=0xbfebfbff Features2=0x441d> AMD Features=0x20000800 real memory = 4966055936 (4736 MB) Physical memory chunk(s): 0x0000000000001000 - 0x0000000000099fff, 626688 bytes (153 pages) 0x0000000000aa5000 - 0x00000000cf50bfff, 3467014144 bytes (846439 pages) 0x0000000100000000 - 0x0000000127feffff, 671023104 bytes (163824 pages) avail memory = 4127662080 (3936 MB) INTR: Adding local APIC 6 as a target FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs cpu0 (BSP): APIC ID: 0 cpu1 (AP): APIC ID: 6 APIC: CPU 0 has ACPI ID 0 APIC: CPU 1 has ACPI ID 1 MADT: Found IO APIC ID 14, Interrupt 0 at 0xfec00000 ioapic0: Routing external 8259A's -> intpin 0 ioapic0: intpin 0 -> ExtINT (edge, high) ioapic0: intpin 1 -> ISA IRQ 1 (edge, high) ioapic0: intpin 2 -> ISA IRQ 2 (edge, high) ioapic0: intpin 3 -> ISA IRQ 3 (edge, high) ioapic0: intpin 4 -> ISA IRQ 4 (edge, high) ioapic0: intpin 5 -> ISA IRQ 5 (edge, high) ioapic0: intpin 6 -> ISA IRQ 6 (edge, high) ioapic0: intpin 7 -> ISA IRQ 7 (edge, high) ioapic0: intpin 8 -> ISA IRQ 8 (edge, high) ioapic0: intpin 9 -> ISA IRQ 9 (edge, high) ioapic0: intpin 10 -> ISA IRQ 10 (edge, high) ioapic0: intpin 11 -> ISA IRQ 11 (edge, high) ioapic0: intpin 12 -> ISA IRQ 12 (edge, high) ioapic0: intpin 13 -> ISA IRQ 13 (edge, high) ioapic0: intpin 14 -> ISA IRQ 14 (edge, high) ioapic0: intpin 15 -> ISA IRQ 15 (edge, high) ioapic0: intpin 16 -> PCI IRQ 16 (level, low) ioapic0: intpin 17 -> PCI IRQ 17 (level, low) ioapic0: intpin 18 -> PCI IRQ 18 (level, low) ioapic0: intpin 19 -> PCI IRQ 19 (level, low) ioapic0: intpin 20 -> PCI IRQ 20 (level, low) ioapic0: intpin 21 -> PCI IRQ 21 (level, low) ioapic0: intpin 22 -> PCI IRQ 22 (level, low) ioapic0: intpin 23 -> PCI IRQ 23 (level, low) MADT: Found IO APIC ID 13, Interrupt 24 at 0xfec82000 ioapic1: intpin 0 -> PCI IRQ 24 (level, low) ioapic1: intpin 1 -> PCI IRQ 25 (level, low) ioapic1: intpin 2 -> PCI IRQ 26 (level, low) ioapic1: intpin 3 -> PCI IRQ 27 (level, low) ioapic1: intpin 4 -> PCI IRQ 28 (level, low) ioapic1: intpin 5 -> PCI IRQ 29 (level, low) ioapic1: intpin 6 -> PCI IRQ 30 (level, low) ioapic1: intpin 7 -> PCI IRQ 31 (level, low) ioapic1: intpin 8 -> PCI IRQ 32 (level, low) ioapic1: intpin 9 -> PCI IRQ 33 (level, low) ioapic1: intpin 10 -> PCI IRQ 34 (level, low) ioapic1: intpin 11 -> PCI IRQ 35 (level, low) ioapic1: intpin 12 -> PCI IRQ 36 (level, low) ioapic1: intpin 13 -> PCI IRQ 37 (level, low) ioapic1: intpin 14 -> PCI IRQ 38 (level, low) ioapic1: intpin 15 -> PCI IRQ 39 (level, low) ioapic1: intpin 16 -> PCI IRQ 40 (level, low) ioapic1: intpin 17 -> PCI IRQ 41 (level, low) ioapic1: intpin 18 -> PCI IRQ 42 (level, low) ioapic1: intpin 19 -> PCI IRQ 43 (level, low) ioapic1: intpin 20 -> PCI IRQ 44 (level, low) ioapic1: intpin 21 -> PCI IRQ 45 (level, low) ioapic1: intpin 22 -> PCI IRQ 46 (level, low) ioapic1: intpin 23 -> PCI IRQ 47 (level, low) MADT: Found IO APIC ID 12, Interrupt 48 at 0xfec82400 ioapic2: intpin 0 -> PCI IRQ 48 (level, low) ioapic2: intpin 1 -> PCI IRQ 49 (level, low) ioapic2: intpin 2 -> PCI IRQ 50 (level, low) ioapic2: intpin 3 -> PCI IRQ 51 (level, low) ioapic2: intpin 4 -> PCI IRQ 52 (level, low) ioapic2: intpin 5 -> PCI IRQ 53 (level, low) ioapic2: intpin 6 -> PCI IRQ 54 (level, low) ioapic2: intpin 7 -> PCI IRQ 55 (level, low) ioapic2: intpin 8 -> PCI IRQ 56 (level, low) ioapic2: intpin 9 -> PCI IRQ 57 (level, low) ioapic2: intpin 10 -> PCI IRQ 58 (level, low) ioapic2: intpin 11 -> PCI IRQ 59 (level, low) ioapic2: intpin 12 -> PCI IRQ 60 (level, low) ioapic2: intpin 13 -> PCI IRQ 61 (level, low) ioapic2: intpin 14 -> PCI IRQ 62 (level, low) ioapic2: intpin 15 -> PCI IRQ 63 (level, low) ioapic2: intpin 16 -> PCI IRQ 64 (level, low) ioapic2: intpin 17 -> PCI IRQ 65 (level, low) ioapic2: intpin 18 -> PCI IRQ 66 (level, low) ioapic2: intpin 19 -> PCI IRQ 67 (level, low) ioapic2: intpin 20 -> PCI IRQ 68 (level, low) ioapic2: intpin 21 -> PCI IRQ 69 (level, low) ioapic2: intpin 22 -> PCI IRQ 70 (level, low) ioapic2: intpin 23 -> PCI IRQ 71 (level, low) MADT: Interrupt override: source 0, irq 2 ioapic0: Routing IRQ 0 -> intpin 2 ioapic0: intpin 2 trigger: edge ioapic0: intpin 2 polarity: high MADT: Interrupt override: source 9, irq 9 ioapic0: intpin 9 trigger: level ioapic0: intpin 9 polarity: high lapic0: Routing NMI -> LINT1 lapic6: Routing NMI -> LINT1 ioapic2 irqs 48-71 on motherboard ioapic1 irqs 24-47 on motherboard ioapic0 irqs 0-23 on motherboard cpu0 BSP: ID: 0x00000000 VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff timer: 0x000100ef therm: 0x00010000 err: 0x00010000 pcm: 0x00010000 wlan: <802.11 Link Layer> null: random: nfslock: pseudo-device mem: io: acpi0: on motherboard ioapic0: routing intpin 9 (ISA IRQ 9) to vector 48 acpi0: [MPSAFE] pci_open(1): mode 1 addr port (0x0cf8) is 0x80000144 pci_open(1a): mode1res=0x80000000 (0x80000000) pci_cfgcheck: device 0 [class=060000] [hdr=80] is there (id=35908086) acpi_bus_number: root bus has no _BBN, assuming 0 acpi_bus_number: can't get _ADR acpi_bus_number: can't get _ADR AcpiOsDerivePciId: bus 0 dev 31 func 0 acpi0: Power Button (fixed) acpi_bus_number: root bus has no _BBN, assuming 0 acpi_bus_number: can't get _ADR acpi_bus_number: can't get _ADR AcpiOsDerivePciId: bus 0 dev 0 func 0 pci_link0: Links after initial probe: Index IRQ Rtd Ref IRQs 0 11 N 0 11 pci_link0: Links after initial validation: Index IRQ Rtd Ref IRQs 0 11 N 0 11 pci_link0: Links after disable: Index IRQ Rtd Ref IRQs 0 255 N 0 11 pci_link1: Links after initial probe: Index IRQ Rtd Ref IRQs 0 3 N 0 3 pci_link1: Links after initial validation: Index IRQ Rtd Ref IRQs 0 3 N 0 3 pci_link1: Links after disable: Index IRQ Rtd Ref IRQs 0 255 N 0 3 pci_link2: Links after initial probe: Index IRQ Rtd Ref IRQs 0 255 N 0 none pci_link2: Links after initial validation: Index IRQ Rtd Ref IRQs 0 255 N 0 none pci_link2: Links after disable: Index IRQ Rtd Ref IRQs 0 255 N 0 none pci_link3: Links after initial probe: Index IRQ Rtd Ref IRQs 0 3 N 0 3 pci_link3: Links after initial validation: Index IRQ Rtd Ref IRQs 0 3 N 0 3 pci_link3: Links after disable: Index IRQ Rtd Ref IRQs 0 255 N 0 3 pci_link4: Links after initial probe: Index IRQ Rtd Ref IRQs 0 255 N 0 none pci_link4: Links after initial validation: Index IRQ Rtd Ref IRQs 0 255 N 0 none pci_link4: Links after disable: Index IRQ Rtd Ref IRQs 0 255 N 0 none pci_link5: Links after initial probe: Index IRQ Rtd Ref IRQs 0 255 N 0 none pci_link5: Links after initial validation: Index IRQ Rtd Ref IRQs 0 255 N 0 none pci_link5: Links after disable: Index IRQ Rtd Ref IRQs 0 255 N 0 none pci_link6: Links after initial probe: Index IRQ Rtd Ref IRQs 0 255 N 0 none pci_link6: Links after initial validation: Index IRQ Rtd Ref IRQs 0 255 N 0 none pci_link6: Links after disable: Index IRQ Rtd Ref IRQs 0 255 N 0 none pci_link7: Links after initial probe: Index IRQ Rtd Ref IRQs 0 5 N 0 5 pci_link7: Links after initial validation: Index IRQ Rtd Ref IRQs 0 5 N 0 5 pci_link7: Links after disable: Index IRQ Rtd Ref IRQs 0 255 N 0 5 ACPI timer: 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 -> 10 Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x588-0x58b on acpi0 cpu0: on acpi0 cpu1: on acpi0 pcib0: on acpi0 pci0: on pcib0 pci0: physical bus=0 found-> vendor=0x8086, dev=0x3590, revid=0x0a bus=0, slot=0, func=0 class=06-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0146, statreg=0x0090, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) map[14]: type 1, range 32, base ff000000, size 12, enabled found-> vendor=0x8086, dev=0x3591, revid=0x0a bus=0, slot=0, func=1 class=ff-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0100, statreg=0x0000, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x3595, revid=0x0a bus=0, slot=2, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0147, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x00 (0 ns) intpin=a, irq=255 found-> vendor=0x8086, dev=0x3597, revid=0x0a bus=0, slot=4, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0147, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x00 (0 ns) intpin=a, irq=255 found-> vendor=0x8086, dev=0x3599, revid=0x0a bus=0, slot=6, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0147, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x00 (0 ns) intpin=a, irq=255 found-> vendor=0x8086, dev=0x359a, revid=0x0a bus=0, slot=7, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0147, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x00 (0 ns) intpin=a, irq=255 found-> vendor=0x8086, dev=0x359b, revid=0x0a bus=0, slot=8, func=0 class=08-80-00, hdrtype=0x00, mfdev=0 cmdreg=0x0000, statreg=0x0080, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x24d2, revid=0x02 bus=0, slot=29, func=0 class=0c-03-00, hdrtype=0x00, mfdev=1 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 map[20]: type 4, range 32, base 00002200, size 5, enabled pcib0: matched entry for 0.29.INTA pcib0: slot 29 INTA hardwired to IRQ 16 found-> vendor=0x8086, dev=0x24d4, revid=0x02 bus=0, slot=29, func=1 class=0c-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=3 map[20]: type 4, range 32, base 00002600, size 5, enabled pcib0: matched entry for 0.29.INTB pcib0: slot 29 INTB hardwired to IRQ 19 found-> vendor=0x8086, dev=0x24dd, revid=0x02 bus=0, slot=29, func=7 class=0c-03-20, hdrtype=0x00, mfdev=0 cmdreg=0x0106, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=d, irq=5 powerspec 2 supports D0 D3 current D0 map[10]: type 1, range 32, base f9000000, size 10, enabled pcib0: matched entry for 0.29.INTD pcib0: slot 29 INTD hardwired to IRQ 23 found-> vendor=0x8086, dev=0x244e, revid=0xc2 bus=0, slot=30, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0147, statreg=0x0080, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x0b (2750 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x24d0, revid=0x02 bus=0, slot=31, func=0 class=06-01-00, hdrtype=0x00, mfdev=1 cmdreg=0x014f, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x24d1, revid=0x02 bus=0, slot=31, func=2 class=01-01-8a, hdrtype=0x00, mfdev=0 cmdreg=0x0045, statreg=0x02a8, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=255 map[20]: type 4, range 32, base 00000480, size 4, enabled found-> vendor=0x8086, dev=0x24d3, revid=0x02 bus=0, slot=31, func=3 class=0c-05-00, hdrtype=0x00, mfdev=0 cmdreg=0x0401, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=3 map[20]: type 4, range 32, base 00000440, size 5, enabled pcib0: matched entry for 0.31.INTB pcib0: slot 31 INTB hardwired to IRQ 17 pci0: at device 0.1 (no driver attached) pcib1: at device 2.0 on pci0 pcib1: secondary bus 2 pcib1: subordinate bus 2 pcib1: I/O decode 0x4000-0x3fff pcib1: memory decode 0xdf000000-0xdeffffff pcib1: prefetched decode 0xdf000000-0xdeffffff pcib1: could not get PCI interrupt routing table for \_SB_.PCI0.PCI1 - AE_NOT_FOUND pci2: on pcib1 pci2: physical bus=2 pcib2: at device 4.0 on pci0 pcib2: secondary bus 3 pcib2: subordinate bus 5 pcib2: I/O decode 0x4000-0x4fff pcib2: memory decode 0xdd000000-0xdeffffff pcib2: prefetched decode 0xdd000000-0xdcffffff pcib2: could not get PCI interrupt routing table for \_SB_.PCI0.PCI4 - AE_NOT_FOUND pci3: on pcib2 pci3: physical bus=3 found-> vendor=0x8086, dev=0x0329, revid=0x09 bus=3, slot=0, func=0 class=06-04-00, hdrtype=0x01, mfdev=1 cmdreg=0x0147, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x032a, revid=0x09 bus=3, slot=0, func=2 class=06-04-00, hdrtype=0x01, mfdev=1 cmdreg=0x0147, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x00 (0 ns) pcib3: at device 0.0 on pci3 pcib3: secondary bus 4 pcib3: subordinate bus 4 pcib3: I/O decode 0x4000-0x4fff pcib3: memory decode 0xdd000000-0xdeffffff pcib3: prefetched decode 0xdd000000-0xdcffffff pci4: on pcib3 pci4: physical bus=4 found-> vendor=0x9005, dev=0x8017, revid=0x10 bus=4, slot=2, func=0 class=01-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0157, statreg=0x0430, cachelnsz=16 (dwords) lattimer=0x40 (1920 ns), mingnt=0x28 (10000 ns), maxlat=0x19 (6250 ns) intpin=a, irq=11 powerspec 2 supports D0 D3 current D0 MSI supports 2 messages, 64 bit map[10]: type 4, range 32, base 00004000, size 8, enabled pcib3: (null) requested I/O range 0x4000-0x40ff: in range pcib2: (null) requested I/O range 0x4000-0x40ff: in range map[14]: type 1, range 64, base deffe000, size 13, enabled pcib3: (null) requested memory range 0xdeffe000-0xdeffffff: good pcib2: (null) requested memory range 0xdeffe000-0xdeffffff: good map[1c]: type 4, range 32, base 00004100, size 8, enabled pcib3: (null) requested I/O range 0x4100-0x41ff: in range pcib2: (null) requested I/O range 0x4100-0x41ff: in range pcib3: matched entry for 4.2.INTA pcib3: slot 2 INTA hardwired to IRQ 24 ahd0: port 0x4000-0x40ff,0x4100-0x41ff mem 0xdeffe000-0xdeffffff irq 24 at device 2.0 on pci4 ahd0: Defaulting to MEMIO on ahd0: Reserved 0x100 bytes for rid 0x10 type 4 at 0x4000 ahd0: Reserved 0x100 bytes for rid 0x1c type 4 at 0x4100 ahd0: Enabling 39Bit Addressing ahd0: Reading VPD from SEEPROM...ahd0: VPD parsing successful ahd0: Reading SEEPROM...done. ahd0: STPWLEVEL is on ahd0: Manual Primary Termination ahd0: Manual Secondary Termination ahd0: Primary High byte termination Disabled ahd0: Primary Low byte termination Enabled ahd0: Secondary High byte termination Disabled ahd0: Secondary Low byte termination Disabled ahd0: Downloading Sequencer Program... 683 instructions downloaded ahd0: Features 0x3c001, Bugs 0x500000, Flags 0x143f1 ioapic1: routing intpin 0 (PCI IRQ 24) to vector 49 ahd0: [GIANT-LOCKED] aic7901: Ultra320 Wide Channel A, SCSI Id=7, PCI-X 67-100Mhz, 512 SCBs pcib4: at device 0.2 on pci3 pcib4: secondary bus 5 pcib4: subordinate bus 5 pcib4: I/O decode 0x5000-0x4fff pcib4: memory decode 0xdd000000-0xdcffffff pcib4: prefetched decode 0xdd000000-0xdcffffff pci5: on pcib4 pci5: physical bus=5 pcib5: at device 6.0 on pci0 pcib5: secondary bus 6 pcib5: subordinate bus 6 pcib5: I/O decode 0x5000-0x4fff pcib5: memory decode 0xdb000000-0xdcffffff pcib5: prefetched decode 0xdb000000-0xdaffffff pcib5: could not get PCI interrupt routing table for \_SB_.PCI0.PCI5 - AE_NOT_FOUND pci6: on pcib5 pci6: physical bus=6 found-> vendor=0x14e4, dev=0x1659, revid=0x01 bus=6, slot=0, func=0 class=02-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0146, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 powerspec 2 supports D0 D3 current D0 MSI supports 8 messages, 64 bit map[10]: type 1, range 64, base dcff0000, size 16, enabled pcib5: (null) requested memory range 0xdcff0000-0xdcffffff: good pcib0: matched entry for 0.6.INTA pcib0: slot 6 INTA hardwired to IRQ 16 pcib5: slot 0 INTA is routed to irq 16 bge0: mem 0xdcff0000-0xdcffffff irq 16 at device 0.0 on pci6 bge0: Reserved 0x10000 bytes for rid 0x10 type 3 at 0xdcff0000 miibus0: on bge0 brgphy0: on miibus0 brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX, 1000baseTX-FDX, auto bge0: bpf attached bge0: Ethernet address: 00:0d:60:99:17:dc ioapic0: routing intpin 16 (PCI IRQ 16) to vector 50 bge0: [MPSAFE] pcib6: at device 7.0 on pci0 pcib6: secondary bus 7 pcib6: subordinate bus 7 pcib6: I/O decode 0x5000-0xffff pcib6: memory decode 0xd9000000-0xdaffffff pcib6: prefetched decode 0xd9000000-0xd8ffffff pcib6: could not get PCI interrupt routing table for \_SB_.PCI0.PCI6 - AE_NOT_FOUND pci7: on pcib6 pci7: physical bus=7 found-> vendor=0x14e4, dev=0x1659, revid=0x01 bus=7, slot=0, func=0 class=02-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0146, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 powerspec 2 supports D0 D3 current D0 MSI supports 8 messages, 64 bit map[10]: type 1, range 64, base daff0000, size 16, enabled pcib6: (null) requested memory range 0xdaff0000-0xdaffffff: good pcib0: matched entry for 0.7.INTA pcib0: slot 7 INTA hardwired to IRQ 16 pcib6: slot 0 INTA is routed to irq 16 bge1: mem 0xdaff0000-0xdaffffff irq 16 at device 0.0 on pci7 bge1: Reserved 0x10000 bytes for rid 0x10 type 3 at 0xdaff0000 miibus1: on bge1 brgphy1: on miibus1 brgphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX, 1000baseTX-FDX, auto bge1: bpf attached bge1: Ethernet address: 00:0d:60:99:17:dd bge1: [MPSAFE] pci0: at device 8.0 (no driver attached) uhci0: port 0x2200-0x221f irq 16 at device 29.0 on pci0 uhci0: Reserved 0x20 bytes for rid 0x20 type 4 at 0x2200 uhci0: [GIANT-LOCKED] usb0: on uhci0 usb0: USB revision 1.0 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered uhci1: port 0x2600-0x261f irq 19 at device 29.1 on pci0 uhci1: Reserved 0x20 bytes for rid 0x20 type 4 at 0x2600 ioapic0: routing intpin 19 (PCI IRQ 19) to vector 51 uhci1: [GIANT-LOCKED] usb1: on uhci1 usb1: USB revision 1.0 uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered ehci0: mem 0xf9000000-0xf90003ff irq 23 at device 29.7 on pci0 ehci0: Reserved 0x400 bytes for rid 0x10 type 3 at 0xf9000000 ioapic0: routing intpin 23 (PCI IRQ 23) to vector 52 ehci0: [GIANT-LOCKED] usb2: EHCI version 1.0 usb2: companion controllers, 2 ports each: usb0 usb1 usb2: on ehci0 usb2: USB revision 2.0 uhub2: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1 uhub2: 4 ports with 4 removable, self powered pcib7: at device 30.0 on pci0 pcib7: secondary bus 1 pcib7: subordinate bus 1 pcib7: I/O decode 0x3000-0x3fff pcib7: memory decode 0xf8000000-0xf8ffffff pcib7: prefetched decode 0xf0000000-0xf7ffffff pcib7: Subtractively decoded bridge. pci1: on pcib7 pci1: physical bus=1 found-> vendor=0x1002, dev=0x5159, revid=0x00 bus=1, slot=1, func=0 class=03-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0187, statreg=0x0290, cachelnsz=16 (dwords) lattimer=0x40 (1920 ns), mingnt=0x08 (2000 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type 3, range 32, base f0000000, size 27, enabled pcib7: (null) requested memory range 0xf0000000-0xf7ffffff: good map[14]: type 4, range 32, base 00003000, size 8, enabled pcib7: (null) requested I/O range 0x3000-0x30ff: in range map[18]: type 1, range 32, base f8000000, size 16, enabled pcib7: (null) requested memory range 0xf8000000-0xf800ffff: good pcib7: matched entry for 1.1.INTA pcib7: slot 1 INTA hardwired to IRQ 16 pci1: at device 1.0 (no driver attached) isab0: at device 31.0 on pci0 isa0: on isab0 atapci0: port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x480-0x48f at device 31.2 on pci0 atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0x480 ata0: on atapci0 atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0 atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6 ata0: reset tp1 mask=03 ostat0=50 ostat1=00 ata0: stat0=0x00 err=0x01 lsb=0x14 msb=0xeb ata0: stat1=0x00 err=0x00 lsb=0x00 msb=0x00 ata0: reset tp2 stat0=00 stat1=00 devices=0x4 ioapic0: routing intpin 14 (ISA IRQ 14) to vector 53 ata0: [MPSAFE] ata1: on atapci0 atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170 atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376 ata1: reset tp1 mask=03 ostat0=7f ostat1=7f ata1: stat0=0x7f err=0xff lsb=0xff msb=0xff ata1: stat0=0x7f err=0xff lsb=0xff msb=0xff ata1: stat0=0x7f err=0xff lsb=0xff msb=0xff ata1: stat0=0x7f err=0xff lsb=0xff msb=0xff ata1: stat0=0x7f err=0xff lsb=0xff msb=0xff ata1: stat0=0x7f err=0xff lsb=0xff msb=0xff ata1: stat0=0x7f err=0xff lsb=0xff msb=0xff ata1: stat0=0x7f err=0xff lsb=0xff msb=0xff ata1: stat0=0x7f err=0xff lsb=0xff msb=0xff ata1: stat0=0x7f err=0xff lsb=0xff msb=0xff ata1: stat0=0x7f err=0xff lsb=0xff msb=0xff ata1: stat0=0x7f err=0xff lsb=0xff msb=0xff ata1: stat0=0x7f err=0xff lsb=0xff msb=0xff ata1: stat0=0x7f err=0xff lsb=0xff msb=0xff ata1: stat0=0x7f err=0xff lsb=0xff msb=0xff ata1: stat0=0x7f err=0xff lsb=0xff msb=0xff ata1: stat0=0x7f err=0xff lsb=0xff msb=0xff ata1: stat0=0x7f err=0xff lsb=0xff msb=0xff ata1: stat0=0x7f err=0xff lsb=0xff msb=0xff ata1: stat0=0x7f err=0xff lsb=0xff msb=0xff ata1: stat0=0x7f err=0xff lsb=0xff msb=0xff ata1: stat0=0x7f err=0xff lsb=0xff msb=0xff ata1: stat1=0x7f err=0xff lsb=0xff msb=0xff ata1: reset tp2 stat0=ff stat1=ff devices=0x0 ioapic0: routing intpin 15 (ISA IRQ 15) to vector 54 ata1: [MPSAFE] pci0: at device 31.3 (no driver attached) atkbdc0: port 0x64,0x60 irq 1 on acpi0 atkbd0: irq 1 on atkbdc0 atkbd: the current kbd controller command byte 0065 atkbd: unable to set the command byte. kbd0 at atkbd0 kbd0: atkbd0, generic (0), config:0x0, flags:0x3d0000 ioapic0: routing intpin 1 (ISA IRQ 1) to vector 55 atkbd0: [GIANT-LOCKED] psm0: unable to allocate IRQ psmcpnp0: irq 12 on acpi0 psm0: current command byte:0065 psm: failed to restore the keyboard controller command byte. psm0: unable to set the command byte. sio0: irq maps: 0x4001 0x4011 0x4001 0x4001 sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 sio0: type 16550A, console ioapic0: routing intpin 4 (ISA IRQ 4) to vector 56 ahc_isa_probe 0: ioport 0xc00 alloc failed ex_isa_identify() atkbdc: atkbdc0 already exists; skipping it sio: sio0 already exists; skipping it pnp_identify: Trying Read_Port at 203 pnp_identify: Trying Read_Port at 243 pnp_identify: Trying Read_Port at 283 pnp_identify: Trying Read_Port at 2c3 pnp_identify: Trying Read_Port at 303 pnp_identify: Trying Read_Port at 343 pnp_identify: Trying Read_Port at 383 pnp_identify: Trying Read_Port at 3c3 PNP Identify complete sc: sc0 already exists; skipping it vga: vga0 already exists; skipping it isa_probe_children: disabling PnP devices isa_probe_children: probing non-PnP devices orm0: at iomem 0xc0000-0xcafff on isa0 fdc0 failed to probe at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 ppc0: cannot reserve I/O port range ppc0: failed to probe at irq 7 on isa0 sc0: at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sc0: fb0, kbd0, terminal emulator: sc (syscons terminal) sio1: configured irq 3 not in bitmap of probed irqs 0 sio1: port may not be enabled sio1: irq maps: 0x4001 0x4001 0x4001 0x4001 sio1: probe failed test(s): 0 1 2 4 6 7 9 sio1 failed to probe at port 0x2f8-0x2ff irq 3 on isa0 sio2: not probed (disabled) sio3: not probed (disabled) vga0: at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 isa_probe_children: probing PnP devices Device configuration finished. Reducing kern.maxvnodes 233016 -> 100000 procfs registered linprocfs registered lapic: Divisor 2, Frequency 100003857 hz Timecounter "TSC" frequency 3000132540 Hz quality -100 Timecounters tick every 1.000 msec module_register_init: MOD_LOAD (amr_linux, 0xffffffff805fb780, 0) error 6 Linux ELF exec handler installed lo0: bpf attached Waiting 5 seconds for SCSI devices to settle (noperiph:ahd0:0:-1:-1): SCSI bus reset delivered. 0 SCBs aborted. ata0-master: pio=PIO4 wdma=WDMA2 udma=UDMA33 cable=40 wire acd0: DVDROM drive at ata0 as master acd0: read 1722KB/s (4134KB/s), 256KB buffer, UDMA33 acd0: Reads: CDR, CDRW, CDDA stream, DVDROM, DVDR, DVDRAM, packet acd0: Writes: acd0: Audio: play, 256 volume levels acd0: Mechanism: ejectable tray, unlocked acd0: Medium: no/blank disc