root@proliant-dl380:~> hpasmcli
HP management CLI for FreeBSD (v7.22)
Copyright 2003,2005 Hewlett-Packard Development Group, L.P.

--------------------------------------------------------------------------
NOTE: Some hpasmcli commands may not be supported on all Proliant servers.
      Type 'help' to get a list of all top level commands.
--------------------------------------------------------------------------
hpasmcli> show server
System        : ProLiant DL380 G3
Serial No.    : 0230KJN20015    
ROM version   : P29 05/01/2004
iLo present   : Yes
Embedded NICs : 2
        NIC1 MAC: 00:02:a5:ff:0a:5b
        NIC2 MAC: 00:02:a5:ff:0a:5a

Processor: 0
        Name         : Intel Xeon
        Stepping     : 4
        Speed        : 2400 MHz
        Bus          : 400 MHz
        Socket       : 2
        Level2 Cache : 512 KBytes
        Status       : Ok

Processor: 1
        Name         : Intel Xeon
        Stepping     : 4
        Speed        : 2400 MHz
        Bus          : 400 MHz
        Socket       : 1
        Level2 Cache : 512 KBytes
        Status       : Ok

Processor total  : 2

Memory installed : 512 MBytes
ECC supported    : Yes
hpasmcli> show dimm
DIMM Configuration
------------------
Cartridge #:   0
Module #:      1
Present:       Yes
Form Factor:   9h
Memory Type:   12h
Size:          256 MB
Speed:         266 MHz
Status:        Ok

Cartridge #:   0
Module #:      2
Present:       Yes
Form Factor:   9h
Memory Type:   12h
Size:          256 MB
Speed:         266 MHz
Status:        Ok

hpasmcli> show ht
Processor hyper-threading is currently enabled.
hpasmcli> show fans
Fan  Location        Present Speed  of max  Redundant  Partner  Hot-pluggable
---  --------        ------- -----  ------  ---------  -------  -------------
#1   PROCESSOR_ZONE  Yes     NORMAL 8%      Yes        2        Yes           
#2   PROCESSOR_ZONE  Yes     NORMAL 8%      Yes        1        Yes           
#3   I/O_ZONE        Yes     NORMAL 15%     Yes        4        Yes           
#4   I/O_ZONE        Yes     NORMAL 15%     Yes        3        Yes           
#5   PROCESSOR_ZONE  Yes     NORMAL 8%      Yes        1        Yes           
#6   PROCESSOR_ZONE  Yes     NORMAL 8%      Yes        1        Yes           
#7   POWERSUPPLY_BAY Yes     NORMAL 20%     Yes        8        Yes           
#8   POWERSUPPLY_BAY Yes     NORMAL 20%     Yes        7        Yes           

hpasmcli> show temp
Sensor   Location              Temp       Threshold
------   --------              ----       ---------
#0        SYSTEM_BD             -          -       
#1        PROCESSOR_ZONE       35C/95F    62C/143F 
#2        CPU#1                33C/91F    73C/163F 
#3        I/O_ZONE             44C/111F   68C/154F 
#4        CPU#2                34C/93F    73C/163F 
#5        POWER_SUPPLY_BAY     31C/87F    55C/131F 

hpasmcli> quit