Now booting linux kernel: Base address 0x80050000 Entry 0x80091510 memsize=0x08000000 modetty0=0,n,8,1,hw board=RouterStation Pro ethaddr=00.15.6d.10.00.0c platform frequency: 720000000 arguments: a0 = 00000002 a1 = 80050028 a2 = 80050000 a3 = 0000000a Environment: memsize = 0x08000000 modetty0 = 0,n,8,1,hw ethaddr = 00.15.6d.10.00.0c board = RouterStation Pro Cache info: picache_stride = 4096 picache_loopcount = 16 pdcache_stride = 4096 pdcache_loopcount = 8 cpu0: MIPS Technologies processor v116.147 MMU: Standard TLB, 16 entries L1 i-cache: 4 ways of 512 sets, 32 bytes per line L1 d-cache: 4 ways of 256 sets, 32 bytes per line Config1=0x9ee3519e Config3=0x20 KDB: debugger backends: ddb KDB: current backend: ddb Copyright (c) 1992-2009 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 9.0-CURRENT #8: Tue Oct 6 11:50:22 PDT 2009 gonzo@figaro.bluezbox.com:/src/FreeBSD/obj/mips/mips/src/FreeBSD/mips/sys/AR71XX mips real memory = 134217728 (131072K bytes) Physical memory chunk(s): 0x00526000 - 0x07d68fff, 126103552 bytes (30787 pages) avail memory = 125296640 (119MB) wlan: <802.11 Link Layer> nfslock: pseudo-device mem: null: crypto: random: nexus0: clock0: on nexus0 clock0: [FILTER] apb0 at irq 4 on nexus0 apb0: [FILTER] uart0: <16550 or compatible> on apb0 uart0: [FILTER] uart0: fast interrupt uart0: console (115200,n,8,1) ehci0: at mem 0x1b000000-0x1bffffff irq 1 on nexus0 ehci0: [MPSAFE] ehci0: [ITHREAD] usbus0: set host controller mode ehci_init:242: start cmd=0x01000010 EHCI_CMD_PSE sts=0x00001212 EHCI_STS_HCH EHCI_STS_HSE EHCI_STS_ERRINT ien=0x0000a020 frindex=0x00000000 ctrdsegm=0x00080000 periodic=0x00001000 async=0x00000000 usbus0: EHCI version 1.0 ehci_init:259: sparams=0x1212 ehci_init:263: cparams=0xa020 ehci_init:274: usbus0: resetting usbus0: set host controller mode QH(0xa072e000) at 0x0072e000: link=0x0072e002 endp=0x0000a000 addr=0x00 inact=0 endpt=0 eps=2 dtc=0 hrecl=1 mpl=0x0 ctl=0 nrl=0 endphub=0x40000000 smask=0x00 cmask=0x00 huba=0x00 port=0 mult=1 curqtd=0x00000000<> Overlay qTD: next=0x00000001 altnext=0x00000001 status=0x00000040: toggle=0 bytes=0x0 ioc=0 c_page=0x0 cerr=0 pid=0 stat=NOT_ACTIVE-HALTED buffer[0]=0x00000000 buffer[1]=0x00000000 buffer[2]=0x00000000 buffer[3]=0x00000000 buffer[4]=0x00000000 buffer_hi[0]=0x00000000 buffer_hi[1]=0x00000000 buffer_hi[2]=0x00000000 buffer_hi[3]=0x00000000 buffer_hi[4]=0x00000000 usbus0: on ehci0 usb_needs_explore:1434: usb_needs_explore:1442: No root HUB pcib0 at irq 0 on nexus0 pcib0: [FILTER] pci0: on pcib0 pci0: domain=0, physical bus=0 found-> vendor=0x0700, dev=0x1107, revid=0x01 domain=0, bus=0, slot=0, func=0 class=00-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0356, statreg=0x02b0, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) map[10]: type Prefetchable Memory, range 32, base 0, size 28, enabled map[14]: type I/O Port, range 32, base 0, size 8, port disabled pci0: at device 0.0 (no driver attached) arge0: at mem 0x19000000-0x19000fff irq 2 on nexus0 arge0: No PHY specified, using 4 miibus0: on arge0 ukphy0: PHY 4 on miibus0 ukphy0: OUI 0x001374, model 0x0004, rev. 1 ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT-FDX, auto arge0: bpf attached arge0: Ethernet address: 00:15:6d:10:00:0c arge0: [MPSAFE] arge0: [FILTER+ITHREAD] spi0: at mem 0x1f000000-0x1f00000f on nexus0 spibus0: on spi0 mx25l0: at cs 0 on spibus0 mx25l0: mx25ll128, sector 65536 bytes, 256 sectors ar71xx_wdog0: on nexus0 cryptosoft0: on nexus0 crypto: assign cryptosoft0 driver id 0, flags 100663296 crypto: cryptosoft0 registers alg 1 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 2 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 3 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 4 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 5 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 16 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 6 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 7 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 18 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 19 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 20 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 8 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 15 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 9 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 10 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 13 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 14 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 11 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 21 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 17 flags 0 maxoplen 0 Device configuration finished. Timecounter "MIPS32" frequency 360000000 Hz quality 800 Timecounters tick every 1.000 msec crypto: lo0: bpf attached GEOM: new disk flash/spi0 usbus0: 480Mbps High Speed USB v2.0 ehci_set_hw_power:3826: ehci_set_hw_power:3838: Async is active ehci_set_hw_power:3843: Periodic is active usb_alloc_device:1460: parent_dev=0xc0c84100, bus=0xc0c81c50, parent_hub=0, depth=0, port_index=0, port_no=1, speed=3, usb_mode=0 usb_set_device_state:2485: udev 0xc0c93c00 state DETACHED -> POWERED ehci_ep_init:3697: endpoint=0xc0c93c78, addr=0, endpt=0, mode=0 (0) usbd_req_set_address:1180: setting device address=1 usbd_do_request_flags:292: udev=0xc0c93c00 bmRequestType=0x00 bRequest=0x05 wValue=0x0001 wIndex=0x0000 wLength=0x0000 usbd_do_request_flags:327: Handle Request function is set ehci_roothub_exec:3067: type=0x00 request=0x05 wLen=0x0000 wValue=0x0001 wIndex=0x0000 bootpc_init: wired to interface 'arge0' Implement me: SIOCDELMULTI Implement me: SIOCDELMULTI Implement me: SIOCDELMULTI Implement me: SIOCSIFFLAGS Implement me: SIOCDELMULTI Sending DHCP Discover packet from interface arge0 (00:15:6d:10:00:0c) arge0: link state changed to DOWN usb_set_device_state:2485: udev 0xc0c93c00 state POWERED -> ADDRESSED usbd_req_get_desc:719: id=0, type=1, index=0, max_len=8 usbd_do_request_flags:292: udev=0xc0c93c00 bmRequestType=0x80 bRequest=0x06 wValue=0x0100 wIndex=0x0000 wLength=0x0008 usbd_do_request_flags:327: Handle Request function is set ehci_roothub_exec:3067: type=0x80 request=0x06 wLen=0x0008 wValue=0x0100 wIndex=0x0000 usb_alloc_device:1650: adding unit addr=1, rev=200, class=9, subclass=0, protocol=1, maxpacket=64, len=8, speed=3 usbd_req_get_device_desc:1043: usbd_req_get_desc:719: id=0, type=1, index=0, max_len=18 usbd_do_request_flags:292: udev=0xc0c93c00 bmRequestType=0x80 bRequest=0x06 wValue=0x0100 wIndex=0x0000 wLength=0x0012 usbd_do_request_flags:327: Handle Request function is set ehci_roothub_exec:3067: type=0x80 request=0x06 wLen=0x0012 wValue=0x0100 wIndex=0x0000 usbd_req_get_desc:719: id=255, type=3, index=0, max_len=4 usbd_do_request_flags:292: udev=0xc0c93c00 bmRequestType=0x80 bRequest=0x06 wValue=0x0300 wIndex=0x00ff wLength=0x0002 usbd_do_request_flags:327: Handle Request function is set ehci_roothub_exec:3067: type=0x80 request=0x06 wLen=0x0002 wValue=0x0300 wIndex=0x00ff usbd_do_request_flags:292: udev=0xc0c93c00 bmRequestType=0x80 bRequest=0x06 wValue=0x0300 wIndex=0x00ff wLength=0x0004 usbd_do_request_flags:327: Handle Request function is set ehci_roothub_exec:3067: type=0x80 request=0x06 wLen=0x0004 wValue=0x0300 wIndex=0x00ff usb_alloc_device:1722: Using first language usb_alloc_device:1726: Language selected: 0x0001 usbd_req_get_desc:719: id=1, type=3, index=1, max_len=255 usbd_do_request_flags:292: udev=0xc0c93c00 bmRequestType=0x80 bRequest=0x06 wValue=0x0301 wIndex=0x0001 wLength=0x0002 usbd_do_request_flags:327: Handle Request function is set ehci_roothub_exec:3067: type=0x80 request=0x06 wLen=0x0002 wValue=0x0301 wIndex=0x0001 usbd_do_request_flags:292: udev=0xc0c93c00 bmRequestType=0x80 bRequest=0x06 wValue=0x0301 wIndex=0x0001 wLength=0x0010 usbd_do_request_flags:327: Handle Request function is set ehci_roothub_exec:3067: type=0x80 request=0x06 wLen=0x0010 wValue=0x0301 wIndex=0x0001 usbd_req_get_desc:719: id=1, type=3, index=2, max_len=255 usbd_do_request_flags:292: udev=0xc0c93c00 bmRequestType=0x80 bRequest=0x06 wValue=0x0302 wIndex=0x0001 wLength=0x0002 usbd_do_request_flags:327: Handle Request function is set ehci_roothub_exec:3067: type=0x80 request=0x06 wLen=0x0002 wValue=0x0302 wIndex=0x0001 usbd_do_request_flags:292: udev=0xc0c93c00 bmRequestType=0x80 bRequest=0x06 wValue=0x0302 wIndex=0x0001 wLength=0x001c usbd_do_request_flags:327: Handle Request function is set ehci_roothub_exec:3067: type=0x80 request=0x06 wLen=0x001c wValue=0x0302 wIndex=0x0001 usb_alloc_device:1766: setting config 0 usbd_set_config_index:487: udev=0xc0c93c00 index=0 usb_detach_device:1063: udev=0xc0c93c00 usb_cdev_free:1944: Freeing device nodes usb_config_parse:652: iface_index=255 cmd=1 usbd_req_get_config_desc_full:1000: index=0 usbd_req_get_config_desc:965: confidx=0 usbd_req_get_desc:719: id=0, type=2, index=0, max_len=9 usbd_do_request_flags:292: udev=0xc0c93c00 bmRequestType=0x80 bRequest=0x06 wValue=0x0200 wIndex=0x0000 wLength=0x0009 usbd_do_request_flags:327: Handle Request function is set ehci_roothub_exec:3067: type=0x80 request=0x06 wLen=0x0009 wValue=0x0200 wIndex=0x0000 usbd_req_get_desc:719: id=0, type=2, index=0, max_len=25 usbd_do_request_flags:292: udev=0xc0c93c00 bmRequestType=0x80 bRequest=0x06 wValue=0x0200 wIndex=0x0000 wLength=0x0019 usbd_do_request_flags:327: Handle Request function is set ehci_roothub_exec:3067: type=0x80 request=0x06 wLen=0x0019 wValue=0x0200 wIndex=0x0000 usbd_set_config_index:552: udev=0xc0c93c00 cdesc=0xc0c83940 (addr 1) cno=1 attr=0x40, selfpowered=1, power=0 usb_set_device_state:2485: udev 0xc0c93c00 state ADDRESSED -> CONFIGURED usbd_req_set_config:1456: setting config 1 usbd_do_request_flags:292: udev=0xc0c93c00 bmRequestType=0x00 bRequest=0x09 wValue=0x0001 wIndex=0x0000 wLength=0x0000 usbd_do_request_flags:327: Handle Request function is set ehci_roothub_exec:3067: type=0x00 request=0x09 wLen=0x0000 wValue=0x0001 wIndex=0x0000 usb_config_parse:652: iface_index=255 cmd=0 usb_config_parse:733: found idesc nendpt=1 usb_config_parse:652: iface_index=255 cmd=2 usb_config_parse:733: found idesc nendpt=1 ehci_ep_init:3697: endpoint=0xc0c88a00, addr=1, endpt=129, mode=0 (1) usb_cdev_create:1891: Creating device nodes usbd_set_config_index:599: error=USB_ERR_NORMAL_COMPLETION usb_alloc_device:1826: new dev (addr 1), udev=0xc0c93c00, parent_hub=0 usb_bus_port_set_device:1421: bus 0xc0c81c50 devices[1] = 0xc0c93c00 ugen0.1: at usbus0 usb_probe_and_attach:1302: iclass=9/0/0 iindex=0/0 uhub0: on usbus0 uhub_attach:709: depth=0 selfpowered=1, parent=0, parent->selfpowered=0 uhub_attach:724: getting HUB descriptor usbd_do_request_flags:292: udev=0xc0c93c00 bmRequestType=0xa0 bRequest=0x06 wValue=0x2900 wIndex=0x0000 wLength=0x0009 usbd_do_request_flags:327: Handle Request function is set ehci_roothub_exec:3067: type=0xa0 request=0x06 wLen=0x0009 wValue=0x2900 wIndex=0x0000 usbd_do_request_flags:292: udev=0xc0c93c00 bmRequestType=0x23 bRequest=0x03 wValue=0x0008 wIndex=0x0001 wLength=0x0000 usbd_do_request_flags:327: Handle Request function is set ehci_roothub_exec:3067: type=0x23 request=0x03 wLen=0x0000 wValue=0x0008 wIndex=0x0001 ehci_roothub_exec:3398: set port power 1 uhub_attach:844: turn on port 1 power ehci_interrupt:1488: real interrupt cmd=0x00010031 EHCI_CMD_ITC_1 EHCI_CMD_ASE EHCI_CMD_PSE EHCI_CMD_RS sts=0x0000c00c EHCI_STS_ASS EHCI_STS_PSS EHCI_STS_FLR EHCI_STS_PCD ien=0x00000037 frindex=0x0000249c ctrdsegm=0x00000000 periodic=0x0072d000 async=0x0072e000 port 1 status=0x00001803 port 2 status=0x00000000 ehci_root_intr:2036: port 1 changed usb_needs_explore:1434: usbd_do_request_flags:292: udev=0xc0c93c00 bmRequestType=0x23 bRequest=0x03 wValue=0x0008 wIndex=0x0002 wLength=0x0000 usbd_do_request_flags:327: Handle Request function is set ehci_roothub_exec:3067: type=0x23 request=0x03 wLen=0x0000 wValue=0x0008 wIndex=0x0002 ehci_roothub_exec:3398: set port power 2 uhub_attach:844: turn on port 2 power uhub0: 2 ports with 2 removable, self powered usb_needs_explore:1434: usb_probe_and_attach:1276: end of interfaces at 1 usb_needs_explore:1434: usb_bus_powerd:1621: bus=0xc0c81c50 usb_bus_powerd:1704: Recomputing power masks ehci_set_hw_power:3826: uhub_explore:561: udev=0xc0c93c00 addr=1 usbd_do_request_flags:292: udev=0xc0c93c00 bmRequestType=0xa3 bRequest=0x00 wValue=0x0000 wIndex=0x0001 wLength=0x0004 usbd_do_request_flags:327: Handle Request function is set ehci_roothub_exec:3067: type=0xa3 request=0x00 wLen=0x0004 wValue=0x0000 wIndex=0x0001 ehci_roothub_exec:3279: get port status i=1 ehci_roothub_exec:3286: port status=0x1803 uhub_read_port_status:280: port 1, wPortStatus=0x0501, wPortChange=0x0001, err=USB_ERR_NORMAL_COMPLETION uhub_reattach_port:301: reattaching port 1 usbd_do_request_flags:292: udev=0xc0c93c00 bmRequestType=0x23 bRequest=0x01 wValue=0x0010 wIndex=0x0001 wLength=0x0000 usbd_do_request_flags:327: Handle Request function is set ehci_roothub_exec:3067: type=0x23 request=0x01 wLen=0x0000 wValue=0x0010 wIndex=0x0001 ehci_roothub_exec:3187: UR_CLEAR_PORT_FEATURE usbd_do_request_flags:292: udev=0xc0c93c00 bmRequestType=0xa3 bRequest=0x00 wValue=0x0000 wIndex=0x0001 wLength=0x0004 usbd_do_request_flags:327: Handle Request function is set ehci_roothub_exec:3067: type=0xa3 request=0x00 wLen=0x0004 wValue=0x0000 wIndex=0x0001 ehci_roothub_exec:3279: get port status i=1 ehci_roothub_exec:3286: port status=0x1801 uhub_read_port_status:280: port 1, wPortStatus=0x0501, wPortChange=0x0000, err=USB_ERR_NORMAL_COMPLETION uhub_reattach_port:349: Port 1 is in Host Mode ehci_root_intr:2036: port 2 changed usb_needs_explore:1434: ehci_interrupt:1488: real interrupt cmd=0x00010001 EHCI_CMD_ITC_1 EHCI_CMD_RS sts=0x00000008 EHCI_STS_FLR ien=0x00000037 frindex=0x00000551 ctrdsegm=0x00000000 periodic=0x0072d000 async=0x0072e000 port 1 status=0x00001801 port 2 status=0x00001803 usbd_do_request_flags:292: udev=0xc0c93c00 bmRequestType=0x23 bRequest=0x03 wValue=0x0004 wIndex=0x0001 wLength=0x0000 usbd_do_request_flags:327: Handle Request function is set ehci_roothub_exec:3067: type=0x23 request=0x03 wLen=0x0000 wValue=0x0004 wIndex=0x0001 ehci_roothub_exec:3345: reset port 1 ehci_roothub_exec:3379: ehci after reset, status=0x00001005 ehci_roothub_exec:3394: ehci port 1 reset, status = 0x00001005 usbd_do_request_flags:292: udev=0xc0c93c00 bmRequestType=0xa3 bRequest=0x00 wValue=0x0000 wIndex=0x0001 wLength=0x0004 usbd_do_request_flags:327: Handle Request function is set ehci_roothub_exec:3067: type=0xa3 request=0x00 wLen=0x0004 wValue=0x0000 wIndex=0x0001 ehci_roothub_exec:3279: get port status i=1 ehci_roothub_exec:3286: port status=0x1005 usbd_do_request_flags:292: udev=0xc0c93c00 bmRequestType=0x23 bRequest=0x01 wValue=0x0014 wIndex=0x0001 wLength=0x0000 usbd_do_request_flags:327: Handle Request function is set ehci_roothub_exec:3067: type=0x23 request=0x01 wLen=0x0000 wValue=0x0014 wIndex=0x0001 ehci_roothub_exec:3187: UR_CLEAR_PORT_FEATURE usbd_req_reset_port:679: port 1 reset returning error=USB_ERR_NORMAL_COMPLETION usbd_do_request_flags:292: udev=0xc0c93c00 bmRequestType=0xa3 bRequest=0x00 wValue=0x0000 wIndex=0x0001 wLength=0x0004 usbd_do_request_flags:327: Handle Request function is set ehci_roothub_exec:3067: type=0xa3 request=0x00 wLen=0x0004 wValue=0x0000 wIndex=0x0001 ehci_roothub_exec:3279: get port status i=1 ehci_roothub_exec:3286: port status=0x1005 uhub_read_port_status:280: port 1, wPortStatus=0x0503, wPortChange=0x0000, err=USB_ERR_NORMAL_COMPLETION usb_alloc_device:1460: parent_dev=0xc0c18a00, bus=0xc0c81c50, parent_hub=0xc0c93c00, depth=1, port_index=0, port_no=1, speed=3, usb_mode=0 usb_set_device_state:2485: udev 0xc0c8b400 state DETACHED -> POWERED ehci_ep_init:3697: endpoint=0xc0c8b478, addr=0, endpt=0, mode=0 (1) usbd_req_set_address:1180: setting device address=2 usbd_do_request_flags:292: udev=0xc0c8b400 bmRequestType=0x00 bRequest=0x05 wValue=0x0002 wIndex=0x0000 wLength=0x0000 usbd_get_endpoint:218: udev=0xc0c8b400 iface_index=0 address=0x0 type=0x0 dir=0xff index=0 usbd_get_endpoint:218: udev=0xc0c8b400 iface_index=0 address=0x0 type=0x0 dir=0xff index=0 usbd_get_endpoint:218: udev=0xc0c8b400 iface_index=0 address=0x0 type=0x0 dir=0xff index=0 usbd_get_endpoint:218: udev=0xc0c8b400 iface_index=0 address=0x0 type=0x0 dir=0xff index=0 usb_command_wrapper:2675: cb 0xc0caf0b0 (enter) usbd_callback_wrapper:2042: case 1-4 usbd_do_request_callback:95: st=0 usbd_transfer_submit:1399: xfer=0xc0caf0b0, endpoint=0xc0c8b478, nframes=1, dir=write usb_dump_endpoint: endpoint=0xc0c8b478 edesc=0xc0c8b72c isoc_next=0 toggle_next=0 bEndpointAddress=0x00 usb_dump_queue: endpoint=0xc0c8b478 xfer: usbd_transfer_submit:1418: open usbd_transfer_power_ref:1574: Adding type 0 to power state usbd_transfer_power_ref:1587: needs power ehci_set_hw_power:3826: ehci_set_hw_power:3838: Async is active usb_command_wrapper:2675: cb 0xc0caf0b0 (enter) usb_command_wrapper:2677: cb 0xc0caf0b0 (leave) usb_command_wrapper:2675: cb 0xc0caf0b0 (enter) usbd_pipe_enter:1586: enter usb_command_wrapper:2675: cb 0xc0caf0b0 (enter) usbd_pipe_start:2430: start ehci_setup_standard_chain:1774: addr=0 endpt=0 sumlen=8 speed=3 ehci_setup_standard_chain:1939: nexttog=0; data before transfer: QTD(0xa0968200) at 0x00968200: next=0x00000001 altnext=0x00000001 status=0x00088280: toggle=0 bytes=0x8 ioc=1 c_page=0x0 cerr=0 pid=2 stat=ACTIVE buffer[0]=0x00834168 buffer[1]=0x00834000 buffer[2]=0x00000000 buffer[3]=0x00000000 buffer[4]=0x00000000 buffer_hi[0]=0x00000000 buffer_hi[1]=0x00000000 buffer_hi[2]=0x00000000 buffer_hi[3]=0x00000000 buffer_hi[4]=0x00000000 dump aborted, too many TDs _ehci_append_qh:1046: 0xa0969000 to 0xa072e000 ehci_check_transfer:1311: xfer=0xc0caf0b0 checking transfer ehci_non_isoc_done:1240: xfer=0xc0caf0b0 endpoint=0xc0c8b478 transfer done QTD(0xa0968200) at 0x00968200: next=0x00000001 altnext=0x00000001 status=0x80008200: toggle=1 bytes=0x0 ioc=1 c_page=0x0 cerr=0 pid=2 stat=NOT_ACTIVE buffer[0]=0x00834168 buffer[1]=0x00834000 buffer[2]=0x00000000 buffer[3]=0x00000000 buffer[4]=0x00000000 buffer_hi[0]=0x00000000 buffer_hi[1]=0x00000000 buffer_hi[2]=0x00000000 buffer_hi[3]=0x00000000 buffer_hi[4]=0x00000000 dump aborted, too many TDs ehci_device_done:2173: xfer=0xc0caf0b0, endpoint=0xc0c8b478, error=0 ehci_device_done:2180: nexttog=1; data after transfer: QTD(0xa0968200) at 0x00968200: next=0x00000001 altnext=0x00000001 status=0x80008200: toggle=1 bytes=0x0 ioc=1 c_page=0x0 cerr=0 pid=2 stat=NOT_ACTIVE buffer[0]=0x00834168 buffer[1]=0x00834000 buffer[2]=0x00000000 buffer[3]=0x00000000 buffer[4]=0x00000000 buffer_hi[0]=0x00000000 buffer_hi[1]=0x00000000 buffer_hi[2]=0x00000000 buffer_hi[3]=0x00000000 buffer_hi[4]=0x00000000 dump aborted, too many TDs _ehci_remove_qh:1118: 0xa0969000 from 0xa0969000 usbd_transfer_done:2197: err=USB_ERR_NORMAL_COMPLETION usb_command_wrapper:2677: cb 0xc0caf0b0 (leave) usb_command_wrapper:2677: cb 0 (leave) usb_command_wrapper:2677: cb 0 (leave) usb_command_wrapper:2675: cb 0xc0caf0b0 (enter) usbd_callback_wrapper:2042: case 1-4 usbd_callback_wrapper_sub:2564: xfer=0xc0caf0b0 endpoint=0xc0c8b478 sts=0 alen=8, slen=8, afrm=1, nfrm=1 usbd_callback_wrapper_sub:2600: xfer=0xc0caf0b0: Control transfer active on endpoint=0xc0c8b478 usbd_do_request_callback:95: st=1 usb_command_wrapper:2677: cb 0 (leave) ehci_interrupt:1488: real interrupt cmd=0x00010021 EHCI_CMD_ITC_1 EHCI_CMD_ASE EHCI_CMD_RS sts=0x00008009 EHCI_STS_ASS EHCI_STS_FLR EHCI_STS_INT ien=0x00000037 frindex=0x00002f7d ctrdsegm=0x00000000 periodic=0x0072d000 async=0x0072e000 port 1 status=0x00001005 port 2 status=0x00001803 usb_command_wrapper:2675: cb 0xc0caf0b0 (enter) usbd_callback_wrapper:2042: case 1-4 usbd_do_request_callback:95: st=0 usbd_transfer_submit:1399: xfer=0xc0caf0b0, endpoint=0xc0c8b478, nframes=1, dir=write usb_dump_endpoint: endpoint=0xc0c8b478 edesc=0xc0c8b72c isoc_next=0 toggle_next=1 bEndpointAddress=0x00 usb_dump_queue: endpoint=0xc0c8b478 xfer: usb_command_wrapper:2675: cb 0xc0caf0b0 (enter) usb_command_wrapper:2677: cb 0xc0caf0b0 (leave) usb_command_wrapper:2675: cb 0xc0caf0b0 (enter) usbd_pipe_enter:1586: enter usb_command_wrapper:2675: cb 0xc0caf0b0 (enter) usbd_pipe_start:2430: start ehci_setup_standard_chain:1774: addr=0 endpt=0 sumlen=0 speed=3 ehci_setup_standard_chain:1939: nexttog=1; data before transfer: QTD(0xa096a200) at 0x0096a200: next=0x00000001 altnext=0x00000001 status=0x80008180: toggle=1 bytes=0x0 ioc=1 c_page=0x0 cerr=0 pid=1 stat=ACTIVE buffer[0]=0x00000000 buffer[1]=0x00000000 buffer[2]=0x00000000 buffer[3]=0x00000000 buffer[4]=0x00000000 buffer_hi[0]=0x00000000 buffer_hi[1]=0x00000000 buffer_hi[2]=0x00000000 buffer_hi[3]=0x00000000 buffer_hi[4]=0x00000000 dump aborted, too many TDs _ehci_append_qh:1046: 0xa096b000 to 0xa072e000 ehci_check_transfer:1311: xfer=0xc0caf0b0 checking transfer ehci_non_isoc_done:1240: xfer=0xc0caf0b0 endpoint=0xc0c8b478 transfer done QTD(0xa096a200) at 0x0096a200: next=0x00000001 altnext=0x00000001 status=0x00008100: toggle=0 bytes=0x0 ioc=1 c_page=0x0 cerr=0 pid=1 stat=NOT_ACTIVE buffer[0]=0x00000000 buffer[1]=0x00000000 buffer[2]=0x00000000 buffer[3]=0x00000000 buffer[4]=0x00000000 buffer_hi[0]=0x00000000 buffer_hi[1]=0x00000000 buffer_hi[2]=0x00000000 buffer_hi[3]=0x00000000 buffer_hi[4]=0x00000000 dump aborted, too many TDs ehci_device_done:2173: xfer=0xc0caf0b0, endpoint=0xc0c8b478, error=0 ehci_device_done:2180: nexttog=0; data after transfer: QTD(0xa096a200) at 0x0096a200: next=0x00000001 altnext=0x00000001 status=0x00008100: toggle=0 bytes=0x0 ioc=1 c_page=0x0 cerr=0 pid=1 stat=NOT_ACTIVE buffer[0]=0x00000000 buffer[1]=0x00000000 buffer[2]=0x00000000 buffer[3]=0x00000000 buffer[4]=0x00000000 buffer_hi[0]=0x00000000 buffer_hi[1]=0x00000000 buffer_hi[2]=0x00000000 buffer_hi[3]=0x00000000 buffer_hi[4]=0x00000000 dump aborted, too many TDs _ehci_remove_qh:1118: 0xa096b000 from 0xa096b000 usbd_transfer_done:2197: err=USB_ERR_NORMAL_COMPLETION usb_command_wrapper:2677: cb 0xc0caf0b0 (leave) usb_command_wrapper:2677: cb 0 (leave) usb_command_wrapper:2677: cb 0 (leave) usb_command_wrapper:2675: cb 0xc0caf0b0 (enter) usbd_callback_wrapper:2042: case 1-4 usbd_callback_wrapper_sub:2564: xfer=0xc0caf0b0 endpoint=0xc0c8b478 sts=0 alen=0, slen=0, afrm=1, nfrm=1 usbd_do_request_callback:95: st=1 usb_command_wrapper:2677: cb 0 (leave) ehci_interrupt:1488: real interrupt cmd=0x00010021 EHCI_CMD_ITC_1 EHCI_CMD_ASE EHCI_CMD_RS sts=0x00008001 EHCI_STS_ASS EHCI_STS_INT ien=0x00000037 frindex=0x00003916 ctrdsegm=0x00000000 periodic=0x0072d000 async=0x0072e000 port 1 status=0x00001005 port 2 status=0x00001803 usb_set_device_state:2485: udev 0xc0c8b400 state POWERED -> ADDRESSED usbd_req_get_desc:719: id=0, type=1, index=0, max_len=8 usbd_do_request_flags:292: udev=0xc0c8b400 bmRequestType=0x80 bRequest=0x06 wValue=0x0100 wIndex=0x0000 wLength=0x0008 usbd_transfer_stop:1703: close ehci_device_done:2173: xfer=0xc0caf0b0, endpoint=0xc0c8b478, error=5 ehci_device_done:2180: nexttog=0; data after transfer: _ehci_remove_qh:1118: 0xa096b000 from 0xa072e000 usbd_transfer_done:2197: err=USB_ERR_CANCELLED usbd_transfer_done:2204: not transferring usbd_get_endpoint:218: udev=0xc0c8b400 iface_index=0 address=0x0 type=0x0 dir=0xff index=0 usbd_get_endpoint:218: udev=0xc0c8b400 iface_index=0 address=0x0 type=0x0 dir=0xff index=0 usbd_get_endpoint:218: udev=0xc0c8b400 iface_index=0 address=0x0 type=0x0 dir=0xff index=0 usbd_get_endpoint:218: udev=0xc0c8b400 iface_index=0 address=0x0 type=0x0 dir=0xff index=0 usb_command_wrapper:2675: cb 0xc0caf0b0 (enter) usbd_callback_wrapper:2042: case 1-4 usbd_do_request_callback:95: st=0 usbd_transfer_submit:1399: xfer=0xc0caf0b0, endpoint=0xc0c8b478, nframes=2, dir=write usb_dump_endpoint: endpoint=0xc0c8b478 edesc=0xc0c8b72c isoc_next=0 toggle_next=0 bEndpointAddress=0x00 usb_dump_queue: endpoint=0xc0c8b478 xfer: usbd_transfer_submit:1418: open usb_command_wrapper:2675: cb 0xc0caf0b0 (enter) usb_command_wrapper:2677: cb 0xc0caf0b0 (leave) usb_command_wrapper:2675: cb 0xc0caf0b0 (enter) usb_command_wrapper:2677: cb 0xc0caf0b0 (leave) usb_command_wrapper:2675: cb 0xc0caf0b0 (enter) usbd_pipe_enter:1586: enter usb_command_wrapper:2675: cb 0xc0caf0b0 (enter) usbd_pipe_start:2430: start ehci_setup_standard_chain:1774: addr=2 endpt=0 sumlen=16 speed=3 ehci_setup_standard_chain:1939: nexttog=0; data before transfer: QTD(0xa0968200) at 0x00968200: next=0x00968180<> altnext=0x00000001 status=0x00088280: toggle=0 bytes=0x8 ioc=1 c_page=0x0 cerr=0 pid=2 stat=ACTIVE buffer[0]=0x00834168 buffer[1]=0x00834000 buffer[2]=0x00000000 buffer[3]=0x00000000 buffer[4]=0x00000000 buffer_hi[0]=0x00000000 buffer_hi[1]=0x00000000 buffer_hi[2]=0x00000000 buffer_hi[3]=0x00000000 buffer_hi[4]=0x00000000 QTD(0xa0968180) at 0x00968180: next=0x00968100<> altnext=0x00000001 status=0x80088180: toggle=1 bytes=0x8 ioc=1 c_page=0x0 cerr=0 pid=1 stat=ACTIVE buffer[0]=0x00834170 buffer[1]=0x00834000 buffer[2]=0x00000000 buffer[3]=0x00000000 buffer[4]=0x00000000 buffer_hi[0]=0x00000000 buffer_hi[1]=0x00000000 buffer_hi[2]=0x00000000 buffer_hi[3]=0x00000000 buffer_hi[4]=0x00000000 QTD(0xa0968100) at 0x00968100: next=0x00000001 altnext=0x00000001 status=0x80008080: toggle=1 bytes=0x0 ioc=1 c_page=0x0 cerr=0 pid=0 stat=ACTIVE buffer[0]=0x00000000 buffer[1]=0x00000000 buffer[2]=0x00000000 buffer[3]=0x00000000 buffer[4]=0x00000000 buffer_hi[0]=0x00000000 buffer_hi[1]=0x00000000 buffer_hi[2]=0x00000000 buffer_hi[3]=0x00000000 buffer_hi[4]=0x00000000 dump aborted, too many TDs _ehci_append_qh:1046: 0xa0969000 to 0xa072e000 ehci_check_transfer:1311: xfer=0xc0caf0b0 checking transfer ehci_non_isoc_done:1240: xfer=0xc0caf0b0 endpoint=0xc0c8b478 transfer done QTD(0xa0968200) at 0x00968200: next=0x00968180<> altnext=0x00000001 status=0x80008200: toggle=1 bytes=0x0 ioc=1 c_page=0x0 cerr=0 pid=2 stat=NOT_ACTIVE buffer[0]=0x00834168 buffer[1]=0x00834000 buffer[2]=0x00000000 buffer[3]=0x00000000 buffer[4]=0x00000000 buffer_hi[0]=0x00000000 buffer_hi[1]=0x00000000 buffer_hi[2]=0x00000000 buffer_hi[3]=0x00000000 buffer_hi[4]=0x00000000 QTD(0xa0968180) at 0x00968180: next=0x00968100<> altnext=0x00000001 status=0x00008100: toggle=0 bytes=0x0 ioc=1 c_page=0x0 cerr=0 pid=1 stat=NOT_ACTIVE buffer[0]=0x00834170 buffer[1]=0x00834000 buffer[2]=0x00000000 buffer[3]=0x00000000 buffer[4]=0x00000000 buffer_hi[0]=0x00000000 buffer_hi[1]=0x00000000 buffer_hi[2]=0x00000000 buffer_hi[3]=0x00000000 buffer_hi[4]=0x00000000 QTD(0xa0968100) at 0x00968100: next=0x00000001 altnext=0x00000001 status=0x00008000: toggle=0 bytes=0x0 ioc=1 c_page=0x0 cerr=0 pid=0 stat=NOT_ACTIVE buffer[0]=0x00000000 buffer[1]=0x00000000 buffer[2]=0x00000000 buffer[3]=0x00000000 buffer[4]=0x00000000 buffer_hi[0]=0x00000000 buffer_hi[1]=0x00000000 buffer_hi[2]=0x00000000 buffer_hi[3]=0x00000000 buffer_hi[4]=0x00000000 dump aborted, too many TDs ehci_device_done:2173: xfer=0xc0caf0b0, endpoint=0xc0c8b478, error=0 ehci_device_done:2180: nexttog=0; data after transfer: QTD(0xa0968200) at 0x00968200: next=0x00968180<> altnext=0x00000001 status=0x80008200: toggle=1 bytes=0x0 ioc=1 c_page=0x0 cerr=0 pid=2 stat=NOT_ACTIVE buffer[0]=0x00834168 buffer[1]=0x00834000 buffer[2]=0x00000000 buffer[3]=0x00000000 buffer[4]=0x00000000 buffer_hi[0]=0x00000000 buffer_hi[1]=0x00000000 buffer_hi[2]=0x00000000 buffer_hi[3]=0x00000000 buffer_hi[4]=0x00000000 QTD(0xa0968180) at 0x00968180: next=0x00968100<> altnext=0x00000001 status=0x00008100: toggle=0 bytes=0x0 ioc=1 c_page=0x0 cerr=0 pid=1 stat=NOT_ACTIVE buffer[0]=0x00834170 buffer[1]=0x00834000 buffer[2]=0x00000000 buffer[3]=0x00000000 buffer[4]=0x00000000 buffer_hi[0]=0x00000000 buffer_hi[1]=0x00000000 buffer_hi[2]=0x00000000 buffer_hi[3]=0x00000000 buffer_hi[4]=0x00000000 QTD(0xa0968100) at 0x00968100: next=0x00000001 altnext=0x00000001 status=0x00008000: toggle=0 bytes=0x0 ioc=1 c_page=0x0 cerr=0 pid=0 stat=NOT_ACTIVE buffer[0]=0x00000000 buffer[1]=0x00000000 buffer[2]=0x00000000 buffer[3]=0x00000000 buffer[4]=0x00000000 buffer_hi[0]=0x00000000 buffer_hi[1]=0x00000000 buffer_hi[2]=0x00000000 buffer_hi[3]=0x00000000 buffer_hi[4]=0x00000000 dump aborted, too many TDs _ehci_remove_qh:1118: 0xa0969000 from 0xa0969000 usbd_transfer_done:2197: err=USB_ERR_NORMAL_COMPLETION usb_command_wrapper:2677: cb 0xc0caf0b0 (leave) usb_command_wrapper:2677: cb 0 (leave) usb_command_wrapper:2677: cb 0 (leave) usb_command_wrapper:2675: cb 0xc0caf0b0 (enter) usbd_callback_wrapper:2042: case 1-4 usbd_callback_wrapper_sub:2564: xfer=0xc0caf0b0 endpoint=0xc0c8b478 sts=0 alen=16, slen=16, afrm=2, nfrm=2 usbd_do_request_callback:95: st=1 usb_command_wrapper:2677: cb 0 (leave) ehci_interrupt:1488: real interrupt cmd=0x00010021 EHCI_CMD_ITC_1 EHCI_CMD_ASE EHCI_CMD_RS sts=0x00008009 EHCI_STS_ASS EHCI_STS_FLR EHCI_STS_INT ien=0x00000037 frindex=0x00000ddd ctrdsegm=0x00000000 periodic=0x0072d000 async=0x0072e000 port 1 status=0x00001005 port 2 status=0x00001803 usb_needs_explore:1434: usb_needs_explore:1434: usb_needs_explore:1434: arge0: link state changed to UP DHCP/BOOTP timeout for server 255.255.255.255 Received DHCP Offer packet on arge0 from 0.0.0.0 (accepted) (no root path) usb_needs_explore:1434: Sending DHCP Request packet from interface arge0 (00:15:6d:10:00:0c) DHCP/BOOTP timeout for server 255.255.255.255 Received DHCP Ack packet on arge0 from 0.0.0.0 (accepted) (got root path) usb_needs_explore:1434: arge0 at 192.168.10.150 server 0.0.0.0 subnet mask 255.255.255.0 rootfs 192.168.10.1:/src/FreeBSD/tftproot/ Adjusted interface arge0 ifa_del_loopback_route: deletion failed