odroidc#  video dev open 480p
mode = 2  vic = 3
set HDMI vic: 3
mode is: 2
viu chan = 1
config HPLL
config HPLL done
reconfig packet setting done
odroidc#  fatload mmc 0 0x100000 kernel.bin
reading kernel.bin

4344856 bytes read
odroidc#  go 0x100000
## Starting application at 0x00100000 ...
KDB: debugger backends: ddb
KDB: current backend: ddb
Copyright (c) 1992-2015 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 11.0-CURRENT #4 r280239M: Thu Mar 19 16:16:38 ULAT 2015
    tsgan@beastie.micom.mng.net:/usr/obj/arm.armv6/usr/mysrc/sys/ODROIDC1 arm
FreeBSD clang version 3.5.0 (tags/RELEASE_350/final 216957) 20141124
WARNING: WITNESS option enabled, expect reduced performance.
VT: init without driver.
Preloaded elf kernel "kernel" at 0xc06274ec.
CPU: Cortex A5 rev 1 (Cortex-A core)
 Supported features: ARM_ISA THUMB2 JAZELLE THUMBEE ARMv4 Security_Ext
 WB disabled EABT branch prediction enabled
LoUU:2 LoC:2 LoUIS:2 
Cache level 1: 
 32KB/32B 4-way data cache WB Read-Alloc Write-Alloc
 32KB/32B 2-way instruction cache Read-Alloc
real memory  = 1073737728 (1023 MB)
avail memory = 1038909440 (990 MB)
Physical memory chunk(s):
  0x00001000 - 0x3fffffff,  1023 MB ( 262143 pages)
Excluded memory regions:
  0x00100000 - 0x00784fff,     6 MB (   1669 pages) NoAlloc 
Static device mappings:
  0xc1100000 - 0xc12fffff mapped at VA 0xffd00000
  0xc4200000 - 0xc42fffff mapped at VA 0xffc00000
  0xc4300000 - 0xc43fffff mapped at VA 0xffb00000
  0xc8000000 - 0xc80fffff mapped at VA 0xffa00000
  0xc8100000 - 0xc81fffff mapped at VA 0xff900000
  0xc9000000 - 0xc97fffff mapped at VA 0xff100000
  0xd9000000 - 0xd90fffff mapped at VA 0xff000000
  0xda000000 - 0xda0fffff mapped at VA 0xfef00000
Amlogic aml8726-m8b SoC
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
ULE: setup cpu 0
ULE: setup cpu 1
ULE: setup cpu 2
ULE: setup cpu 3
random: entropy device infrastructure driver
random: selecting highest priority adaptor <Dummy>
null: <full device, null device, zero device>
openfirm: <Open Firmware control device>
random: SOFT: yarrow init()
random: selecting highest priority adaptor <Yarrow>
mem: <memory>
ofwbus0: <Open Firmware Device Tree>
simplebus0: <Flattened device tree simple bus> on ofwbus0
scu0: <ARM Snoop Control Unit> mem 0x4300000-0x4300fff on simplebus0
cpuconfig0: <Amlogic CPU Config> mem 0x1901ff80-0x1901ff8f on simplebus0
l2cache0: <PL310 L2 cache controller> mem 0x4200000-0x4200fff irq 93 on simplebus0
l2cache0: Part number: 0x3, release: 0x9
l2cache0: L2 Cache enabled: 512KB/32B 8 ways
l2cache0: Early BRESP response: disabled
l2cache0: Instruction prefetch: disabled
l2cache0: Data prefetch: enabled
l2cache0: Non-secure interrupt control: disabled
l2cache0: Non-secure lockdown: disabled
l2cache0: Share override: disabled
l2cache0: Double linefill: disabled
l2cache0: Instruction prefetch: disabled
l2cache0: Data prefetch: enabled
l2cache0: Double linefill on WRAP request: disabled
l2cache0: Prefetch drop: disabled
l2cache0: Incr double Linefill: disabled
l2cache0: Not same ID on exclusive sequence: disabled
l2cache0: Prefetch offset: 0
ccm0: <Amlogic aml8726 ccm> mem 0x1104140-0x1104153 on simplebus0
pinctrl0: <Amlogic aml8726 pinctrl> mem 0x11080b0-0x11080d7,0x11080e8-0x11080ff,0x1108120-0x1108137,0x8100014-0x8100017,0x810002c-0x810002f,0x810002c-0x810002f on simplebus0
Processing 3 pin-config node(s) in pinctrl-0 for pinctrl@11080b0
Processing 1 pin-config node(s) in pinctrl-0 for mmc@1108c20
Processing 1 pin-config node(s) in pinctrl-0 for sdxc@1108e00
gic0: <ARM Generic Interrupt Controller> mem 0x4301000-0x4301fff,0x4300100-0x43001ff on simplebus0
gic0: pn 0x390, arch 0x1, rev 0x1, implementer 0x43b irqs 256
wdt0: <Amlogic aml8726 WDT> mem 0x1109900-0x1109907 irq 32 on simplebus0
timer0: <Amlogic aml8726 timer> mem 0x1109940-0x1109957 irq 42,43,38,61 on simplebus0
Event timer "aml8726 timer A" frequency 1000000 Hz quality 1000
Timecounter "aml8726 timer E" frequency 1000000 Hz quality 1000
ofwbus0: <cpus> type unknown (no driver attached)
rtc0: <Amlogic aml8726 RTC> mem 0x8100740-0x8100753 irq 104 on simplebus0
rtc0: crystal oscillator check failed
device_attach: rtc0 attach returned 6
clkmsr0: <Amlogic aml8726 clkmsr> mem 0x1108758-0x1108767 on simplebus0
clkmsr0: bus clock 159 MHz
uart0: <Amlogic aml8726 UART> mem 0x81004c0-0x81004d3 irq 122 on simplebus0
uart0: RTS iflow, CTS oflow
uart0: console (115200,n,8,1)
uart0: fast interrupt
gpio0: <Amlogic aml8726 GPIO> mem 0x8100024-0x8100027,0x8100024-0x8100027,0x8100028-0x810002b on simplebus0
gpiobus0: <OFW GPIO bus> on gpio0
gpioled0: <GPIO led> at pin(s) 13 on gpiobus0
gpioc0: <GPIO controller> on gpio0
gpio1: <Amlogic aml8726 GPIO> mem 0x1108054-0x1108057,0x1108058-0x110805b,0x110805c-0x110805f on simplebus0
gpiobus1: <OFW GPIO bus> on gpio1
gpioc1: <GPIO controller> on gpio1
gpio2: <Amlogic aml8726 GPIO> mem 0x110806c-0x110806f,0x1108070-0x1108073,0x1108074-0x1108077 on simplebus0
gpiobus2: <OFW GPIO bus> on gpio2
gpioc2: <GPIO controller> on gpio2
aml8726_mmc0: <Amlogic aml8726 MMC> mem 0x1108c20-0x1108c3f irq 60 on simplebus0
mmc0: <MMC/SD bus> on aml8726_mmc0
aml8726_sdxc0: <Amlogic aml8726-m8 SDXC> mem 0x1108e00-0x1108e3b irq 110 on simplebus0
mmc1: <MMC/SD bus> on aml8726_sdxc0
rng0: <Amlogic aml8726 RNG> mem 0x1108100-0x1108107 on simplebus0
aml8726_iic0: <Amlogic aml8726 I2C> mem 0x1108500-0x110851f irq 53 on simplebus0
iicbb0: <I2C bit-banging driver> on aml8726_iic0
iicbus0: <Philips I2C bus> on iicbb0 master-only
iic0: <I2C generic I/O> on iicbus0
aml8726_iic1: <Amlogic aml8726 I2C> mem 0x11087c0-0x11087df irq 160 on simplebus0
iicbb1: <I2C bit-banging driver> on aml8726_iic1
iicbus1: <Philips I2C bus> on iicbb1 master-only
iic1: <I2C generic I/O> on iicbus1
uart1: <Amlogic aml8726 UART> mem 0x11084c0-0x11084d3 irq 58 on simplebus0
uart1: RTS iflow, CTS oflow
uart1: fast interrupt
uart2: <Amlogic aml8726 UART> mem 0x11084dc-0x11084ef irq 107 on simplebus0
uart2: RTS iflow, CTS oflow
uart2: fast interrupt
uart3: <Amlogic aml8726 UART> mem 0x1108700-0x1108713 irq 125 on simplebus0
uart3: RTS iflow, CTS oflow
uart3: fast interrupt
usbphy0: <Amlogic aml8726-m8 USB PHY> mem 0x1108800-0x110881f on simplebus0
usbphy1: <Amlogic aml8726-m8 USB PHY> mem 0x1108820-0x110883f on simplebus0
dwcotg0: <DWC OTG 2.0 integrated USB controller> mem 0x9040000-0x907ffff irq 62 on simplebus0
usbus0 on dwcotg0
dwcotg0: usbpf: Attached
dwcotg1: <DWC OTG 2.0 integrated USB controller> mem 0x90c0000-0x90fffff irq 63 on simplebus0
usbus1 on dwcotg1
dwcotg1: usbpf: Attached
dwc0: <Gigabit Ethernet Controller> mem 0x9410000-0x9411fff irq 40 on simplebus0
miibus0: <MII bus> on dwc0
rgephy0: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 0 on miibus0
rgephy0: OUI 0x00e04c, model 0x0011, rev. 6
rgephy0:  none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT-FDX, 1000baseT-FDX-master, auto
rgephy1: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 1 on miibus0
rgephy1: OUI 0x00e04c, model 0x0011, rev. 6
rgephy1:  none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT-FDX, 1000baseT-FDX-master, auto
dwc0: bpf attached
dwc0: Ethernet address: 62:73:64:f5:48:74
fb0: <Amlogic aml8726 FB> mem 0x8006048-0x8006053,0x1106800-0x1106bff,0x1107400-0x11077ff irq 34,35,44,45 on simplebus0
fbd0 on fb0
VT: initialize with new VT driver "fb".
ofwbus0: <leds> type unknown (no driver attached)
procfs registered
Timecounters tick every 10.000 msec
tcp_init: net.inet.tcp.tcbhashsize auto tuned to 8192
lo0: bpf attached
mmc0: Probing bus
usbus0: 480Mbps High Speed USB v2.0
usbus1: 480Mbps High Speed USB v2.0
mmc0: SD 2.0 interface conditions: OK
mmc0: SD probe: OK (OCR: 0x40ff8000)
mmc0: Current OCR: 0x00ff8000
ugen1.1: <DWCOTG> at usbus1
uhub0: <DWCOTG OTG Root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1
ugen0.1: <DWCOTG> at usbus0
uhub1: <DWCOTG OTG Root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0
mmc0: Probing cards
mmc0: New card detected (CID 03534453553034478013ec7f7000bc00)
mmc0: New card detected (CSD 400e00325b5900001d8a7f800a404000)
mmc0: Card at relative address 0xaaaa added:
mmc0:  card: SDHC SU04G 8.0 SN 13EC7F70 MFG 12/2011 by 3 SD
mmc0:  bus: 4bit, 50MHz, high speed timing
mmc0:  memory: 7744512 blocks, erase sector 8192 blocks
mmc0: setting transfer rate to 50.000MHz (high speed timing)
mmcsd0: 4GB <SDHC SU04G 8.0 SN 13EC7F70 MFG 12/2011 by 3 SD> at mmc0 50.0MHz/4bit/8-block
mmc1: Probing bus
GEOM: new disk mmcsd0
mmc0: setting bus width to 4 bits
GEOM_PART: partition 1 is not aligned on 4194304 bytes
GEOM_PART: partition 2 is not aligned on 4194304 bytes
mmc1: SD probe: failed
mmc1: MMC probe: failed
mmc1: Current OCR: 0x00000000
mmc1: No compatible cards found on bus
uhub0: 1 port with 1 removable, self powered
uhub1: 1 port with 1 removable, self powered
ugen1.2: <vendor 0x05e3> at usbus1
uhub2: <vendor 0x05e3 USB2.0 Hub, class 9/0, rev 2.00/32.98, addr 2> on usbus1
uhub2: MTT enabled
uhub2: 4 ports with 4 removable, self powered
random: unblocking device.
Release APs
WARNING: WITNESS option enabled, expect reduced performance.
Trying to mount root from ufs:mmcsd0s2 []...
warning: no time-of-day clock registered, system time will not be set accurately
start_init: trying /sbin/init
Setting hostuuid: 5a4801ef-b51b-11e4-8369-61de6ad24be1.
Setting hostid: 0x8e146161.
No suitable dump device was found.
Starting file system checks:
/dev/mmcsd0s2: FILE SYSTEM CLEAN; SKIPPING CHECKS
/dev/mmcsd0s2: clean, 176485 free (653 frags, 21979 blocks, 0.3% fragmentation)
mmcsd0: Error indicated: 1 Timeout
g_vfs_done():mmcsd0s2[WRITE(offset=545685504, length=4096)]error = 5
Mounting local file systems:.
/etc/rc: WARNING: $hostname is not set -- see rc.conf(5).
Feeding entropy:.
Starting Network: lo0 dwc0.
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384
	options=600003<RXCSUM,TXCSUM,RXCSUM_IPV6,TXCSUM_IPV6>
	inet6 ::1 prefixlen 128 
	inet6 fe80::1%lo0 prefixlen 64 scopeid 0x2 
	inet 127.0.0.1 netmask 0xff000000 
	groups: lo 
	nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
dwc0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500
	options=80008<VLAN_MTU,LINKSTATE>
	ether 62:73:64:f5:48:74
	media: Ethernet autoselect (none)
	nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
Starting devd.
Starting Network: dwc0.
dwc0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500
	options=80008<VLAN_MTU,LINKSTATE>
	ether 62:73:64:f5:48:74
	media: Ethernet autoselect (none)
	nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
Starting pflogd: 
add net fe80::: gateway ::1
add net ff02::: gateway ::1
add net ::ffff:0.0.0.0: gateway ::1
add net ::0.0.0.0: gateway ::1
Creating and/or trimming log files.
Starting syslogd.
mmcsd0: Error indicated: 1 Timeout
g_vfs_done():mmcsd0s2[WRITE(offset=537886720, length=32768)]error = 5
ELF ldconfig path: /lib /usr/lib /usr/lib/compat
Starting casperd.
Clearing /tmp (X related).
Updating motd:.
Mounting late file systems:.
Configuring vt: blanktime.
Starting sendmail_submit.
Starting sendmail_msp_queue.
mmcsd0: Error indicated: 1 Timeout
g_vfs_done():mmcsd0s2[WRITE(offset=1376256, length=32768)]error = 5
Starting cron.
Starting background file system checks in 60 seconds.

Sun Feb 15 14:08:29 UTC 2015

FreeBSD/arm (Amnesiac) (ttyu0)

login: mmcsd0: Error indicated: 1 Timeout
g_vfs_done():mmcsd0s2[WRITE(offset=537690112, length=32768)]error = 5
root
Feb 15 14:10:10  login: ROOT LOGIN (root) ON ttyu0
Last login: Sun Feb 15 14:04:07 on ttyu0
FreeBSD 11.0-CURRENT (ODROIDC1) #4 r280239M: Thu Mar 19 16:16:38 ULAT 2015
root@:~ #