Copyright (c) 1992-2010 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 7.3-RELEASE #0: Sun Mar 21 05:25:24 UTC 2010
    root@driscoll.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC amd64
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Core(TM)2 Duo CPU     E8135  @ 2.66GHz (2653.35-MHz K8-class CPU)
  Origin = "GenuineIntel"  Id = 0x1067a  Stepping = 10
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=0x408e3bd<SSE3,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,XSAVE>
  AMD Features=0x20100800<SYSCALL,NX,LM>
  AMD Features2=0x1<LAHF>
  TSC: P-state invariant
  Cores per package: 2
usable memory = 3974422528 (3790 MB)
avail memory  = 3794628608 (3618 MB)
ACPI APIC Table: <APPLE  Apple00>
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
 cpu0 (BSP): APIC ID:  0
 cpu1 (AP): APIC ID:  1
ioapic0: Changing APIC ID to 1
ioapic0 <Version 1.1> irqs 0-23 on motherboard
kbd1 at kbdmux0
acpi0: <APPLE Apple00> on motherboard
acpi0: [ITHREAD]
acpi_ec0: <Embedded Controller: GPE 0x3f, ECDT> port 0x62,0x66 on acpi0
acpi0: Power Button (fixed)
unknown: I/O range not supported
acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff irq 0,8 on acpi0
Timecounter "HPET" frequency 25000000 Hz quality 900
acpi0: reservation of 62, 2 (4) failed
acpi0: reservation of 65, b (4) failed
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
acpi_button0: <Power Button> on acpi0
acpi_button1: <Sleep Button> on acpi0
pcib0: <ACPI Host-PCI bridge> on acpi0
pci0: <ACPI PCI bus> on pcib0
pci0: <memory, RAM> at device 0.1 (no driver attached)
isab0: <PCI-ISA bridge> port 0x2000-0x20ff at device 3.0 on pci0
isa0: <ISA bus> on isab0
pci0: <memory, RAM> at device 3.1 (no driver attached)
pci0: <serial bus, SMBus> at device 3.2 (no driver attached)
pci0: <memory, RAM> at device 3.3 (no driver attached)
pci0: <memory, RAM> at device 3.4 (no driver attached)
pci0: <processor> at device 3.5 (no driver attached)
ohci0: <OHCI (generic) USB controller> mem 0xd3588000-0xd3588fff irq 18 at device 4.0 on pci0
ohci0: [GIANT-LOCKED]
ohci0: [ITHREAD]
usb0: OHCI version 1.0, legacy support
usb0: SMM does not respond, resetting
usb0: <OHCI (generic) USB controller> on ohci0
usb0: USB revision 1.0
uhub0: <nVidia OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0
uhub0: 7 ports with 7 removable, self powered
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xd3589200-0xd35892ff irq 19 at device 4.1 on pci0
ehci0: [GIANT-LOCKED]
ehci0: [ITHREAD]
usb1: EHCI version 1.0
usb1: companion controller, 12 ports each: usb0
usb1: <EHCI (generic) USB 2.0 controller> on ehci0
usb1: USB revision 2.0
uhub1: <nVidia EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb1
uhub1: 7 ports with 7 removable, self powered
ugen0: <Apple Inc. Built-in iSight, class 239/2, rev 2.00/2.19, addr 2> on uhub1
ohci1: <OHCI (generic) USB controller> mem 0xd3587000-0xd3587fff irq 20 at device 6.0 on pci0
ohci1: [GIANT-LOCKED]
ohci1: [ITHREAD]
usb2: OHCI version 1.0, legacy support
usb2: <OHCI (generic) USB controller> on ohci1
usb2: USB revision 1.0
uhub2: <nVidia OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb2
uhub2: 5 ports with 5 removable, self powered
ehci1: <EHCI (generic) USB 2.0 controller> mem 0xd3589100-0xd35891ff irq 21 at device 6.1 on pci0
ehci1: [GIANT-LOCKED]
ehci1: [ITHREAD]
usb3: EHCI version 1.0
usb3: companion controller, 12 ports each: usb2
usb3: <EHCI (generic) USB 2.0 controller> on ehci1
usb3: USB revision 2.0
uhub3: <nVidia EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb3
uhub3: 5 ports with 5 removable, self powered
uhub4: <Apple, Inc. Keyboard Hub, class 9/0, rev 2.00/96.15, addr 2> on uhub3
uhub4: single transaction translator
uhub4: 3 ports with 2 removable, bus powered
ukbd0: <Apple, Inc Apple Keyboard, class 0/0, rev 2.00/0.69, addr 3> on uhub4
kbd2 at ukbd0
uhid0: <Apple, Inc Apple Keyboard, class 0/0, rev 2.00/0.69, addr 3> on uhub4
ums0: <Mitsumi Electric Apple Optical USB Mouse, class 0/0, rev 1.10/1.10, addr 4> on uhub4
ums0: 4 buttons and Z dir.
pci0: <multimedia, HDA> at device 8.0 (no driver attached)
pcib1: <PCI-PCI bridge> at device 9.0 on pci0
pci1: <PCI bus> on pcib1
nfe0: <NVIDIA nForce MCP79 Networking Adapter> port 0x21e0-0x21e7 mem 0xd3586000-0xd3586fff,0xd3589000-0xd35890ff,0xd3589300-0xd358930f irq 23 at device 10.0 on pci0
miibus0: <MII bus> on nfe0
rgephy0: <RTL8169S/8110S/8211B media interface> PHY 1 on miibus0
rgephy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
nfe0: Ethernet address: 00:25:4b:a5:b0:2c
nfe0: [FILTER]
atapci0: <nVidia ATA controller> port 0x21d8-0x21df,0x21ec-0x21ef,0x21d0-0x21d7,0x21e8-0x21eb,0x21c0-0x21cf mem 0xd3584000-0xd3585fff irq 16 at device 11.0 on pci0
atapci0: [ITHREAD]
ata2: <ATA channel 0> on atapci0
ata2: [ITHREAD]
ata3: <ATA channel 1> on atapci0
ata3: [ITHREAD]
pcib2: <ACPI PCI-PCI bridge> at device 12.0 on pci0
pci2: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> at device 16.0 on pci0
pci3: <ACPI PCI bus> on pcib3
vgapci0: <VGA-compatible display> port 0x1000-0x107f mem 0xd2000000-0xd2ffffff,0xc0000000-0xcfffffff,0xd0000000-0xd1ffffff irq 17 at device 0.0 on pci3
nvidia0: <GeForce 9400> on vgapci0
vgapci0: child nvidia0 requested pci_enable_busmaster
vgapci0: child nvidia0 requested pci_enable_io
vgapci0: child nvidia0 requested pci_enable_io
nvidia0: [GIANT-LOCKED]
nvidia0: [ITHREAD]
pcib4: <ACPI PCI-PCI bridge> at device 21.0 on pci0
pci4: <ACPI PCI bus> on pcib4
pci4: <network> at device 0.0 (no driver attached)
pcib5: <ACPI PCI-PCI bridge> at device 22.0 on pci0
pci5: <ACPI PCI bus> on pcib5
fwohci0: <1394 Open Host Controller Interface> mem 0xd3100000-0xd3100fff irq 19 at device 0.0 on pci5
fwohci0: [FILTER]
fwohci0: OHCI version 1.10 (ROM=0)
fwohci0: No. of Isochronous channels is 8.
fwohci0: EUI64 00:25:4b:ff:fe:a5:b0:2c
fwohci0: invalid speed 7 (fixed to 3).
fwohci0: Phy 1394a available S800, 3 ports.
fwohci0: Link S800, max_rec 4096 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
dcons_crom0: <dcons configuration ROM> on firewire0
dcons_crom0: bus_addr 0xbe80c000
fwe0: <Ethernet over FireWire> on firewire0
if_fwe0: Fake Ethernet address: 02:25:4b:a5:b0:2c
fwe0: Ethernet address: 02:25:4b:a5:b0:2c
fwip0: <IP over FireWire> on firewire0
fwip0: Firewire address: 00:25:4b:ff:fe:a5:b0:2c @ 0xfffe00000000, S800, maxrec 4096
sbp0: <SBP-2/SCSI over FireWire> on firewire0
fwohci0: Initiate bus reset
fwohci0: BUS reset
fwohci0: node_id=0xc800ffc0, gen=2, CYCLEMASTER mode
cpu0: <ACPI CPU> on acpi0
est0: <Enhanced SpeedStep Frequency Control> on cpu0
p4tcc0: <CPU Frequency Thermal Control> on cpu0
cpu1: <ACPI CPU> on acpi0
est1: <Enhanced SpeedStep Frequency Control> on cpu1
p4tcc1: <CPU Frequency Thermal Control> on cpu1
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd: unable to get the current command byte value.
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
psm0: unable to get the current command byte value.
ppc0: cannot reserve I/O port range
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 8250 or not responding
sio0: [FILTER]
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
uhid1: <Apple Computer, Inc. IR Receiver, class 0/0, rev 2.00/0.16, addr 2> on uhub0
uhub5: <Apple Inc. BRCM2046 Hub, class 9/0, rev 2.00/1.00, addr 2> on uhub2
uhub5: 3 ports with 0 removable, self powered
ugen1: <Apple Inc. Bluetooth USB Host Controller, class 224/1, rev 2.00/1.80, addr 3> on uhub5
ukbd1: <vendor 0x05ac product 0x820a, class 0/0, rev 2.00/1.00, addr 4> on uhub5
kbd3 at ukbd1
ums1: <vendor 0x05ac product 0x820b, class 0/0, rev 2.00/1.00, addr 5> on uhub5
ums1: 3 buttons.
Timecounters tick every 1.000 msec
firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
firewire0: bus manager 0 (me)
ad4: 305245MB <WDC WD3200AAJS-40H3A0 10.04A10> at ata2-master UDMA33
GEOM: ad4: the secondary GPT table is corrupt or invalid.
GEOM: ad4: using the primary only -- recovery suggested.
acd0: DVDR <HL-DT-ST DVDRW GA11N/KA16> at ata3-master UDMA33
SMP: AP CPU #1 Launched!
Trying to mount root from ufs:/dev/ad4s1a
arp: 192.168.254.1 moved from 00:23:f8:29:ca:81 to 00:23:f8:29:ca:7e on nfe0