From: Terje Normann Marthinussen Machine: HP netserver 5/133 LS4. 4 133MHZ pentium CPUs 5 PCI slots on 2 PCI buses, 1 slot on bus 0 is occupied by the second CPU card. 6 EISA slots 2 onboard Adaptec SCSI controllers =============================================================================== MPTable, version 2.0.4 looking for EBDA pointer @ 0x040e, found, searching EBDA @ 0x0009e400 searching CMOS 'top of mem' @ 0x0009e000 (632K) searching default 'top of mem' @ 0x0009fc00 (639K) searching BIOS @ 0x000f0000 MP FPS found in BIOS @ physical addr: 0x000f73a0 ------------------------------------------------------------------------------- MP Floating Pointer Structure: location: BIOS physical address: 0x000f73a0 signature: '_MP_' length: 16 bytes version: 1.1 checksum: 0x71 mode: Virtual Wire ------------------------------------------------------------------------------- MP Config Table Header: physical address: 0x000f73b0 signature: 'PCMP' base table length: 308 version: 1.1 checksum: 0x56 OEM ID: 'INTEL ' Product ID: 'XXPRESS ' OEM table pointer: 0x00000000 OEM table size: 0 entry count: 27 local APIC address: 0xfee00000 extended table length: 0 extended table checksum: 0 ------------------------------------------------------------------------------- MP Config Base Table Entries: -- Processors: APIC ID Version State Family Model Step Flags 0 0x10 BSP, usable 5 2 11 0x03bf 2 0x10 AP, usable 5 2 11 0x03bf 3 0x10 AP, usable 5 2 5 0x03bf 4 0x10 AP, usable 5 2 5 0x03bf -- Bus: Bus ID Type 0 PCI 1 PCI 18 XPRESS 19 EISA -- I/O APICs: APIC ID Version State Address 14 0x11 usable 0xfec00000 -- I/O Ints: Type Polarity Trigger Bus ID IRQ APIC ID INT# ExtINT active-hi edge 19 0 14 0 INT active-hi edge 19 1 14 1 INT active-hi edge 19 0 14 2 INT active-hi edge 19 3 14 3 INT active-hi edge 19 4 14 4 INT active-hi edge 19 5 14 5 INT active-hi edge 19 6 14 6 INT conforms level 19 7 14 7 INT active-hi edge 19 8 14 8 INT active-hi edge 19 9 14 9 INT conforms level 19 10 14 10 INT conforms level 19 11 14 11 INT active-hi edge 19 12 14 12 INT active-hi edge 19 13 14 13 INT active-hi edge 19 14 14 14 INT active-hi edge 19 15 14 15 -- Local Ints: Type Polarity Trigger Bus ID IRQ APIC ID INT# ExtINT active-hi edge 19 0 255 0 NMI active-hi edge 0 0:A 255 1 ------------------------------------------------------------------------------- dmesg output: FreeBSD 2.2-CURRENT #0: Fri Oct 25 17:06:09 MET DST 1996 root@quattro:/usr/src/sys.old/compile/netserver Calibrating clock(s) relative to mc146818A clock... i8254 clock: 1193166 Hz CPU: Pentium (586-class CPU) Origin = "GenuineIntel" Id = 0x52b Stepping=11 Features=0x3bf real memory = 67108864 (65536K bytes) avail memory = 62918656 (61444K bytes) eisa0: Probing for devices on the EISA bus Probing for devices on PCI bus 0: chip0 rev 2 on pci0:0 chip1 rev 5 on pci0:14:0 pci0:15:0: Intel Corporation, device=0x0008, class=0xff, subclass=0x00 [no driver assigned] pci0:15:1: Intel Corporation, device=0x0008, class=0xff, subclass=0x00 [no driver assigned] pci0:15:2: Intel Corporation, device=0x0008, class=0xff, subclass=0x00 [no driver assigned] pci0:15:3: Intel Corporation, device=0x0008, class=0xff, subclass=0x00 [no driver assigned] pci0:15:4: Intel Corporation, device=0x0008, class=0xff, subclass=0x00 [no driver assigned] pci0:15:5: Intel Corporation, device=0x0008, class=0xff, subclass=0x00 [no driver assigned] pci0:15:6: Intel Corporation, device=0x0008, class=0xff, subclass=0x00 [no driver assigned] pci0:15:7: Intel Corporation, device=0x0008, class=0xff, subclass=0x00 [no driver assigned] Probing for devices on PCI bus 1: chip2 rev 2 on pci1:0 vx0 <3COM 3C595 Fast Etherlink XL PCI> rev 0 int a irq 11 on pci1:12 mii[*mii*] address 00:60:97:12:60:e8 Warning! Defective early revision adapter! ahc0 rev 3 int a irq 7 on pci1:13 ahc0: Using left over BIOS settings ahc0: aic7870 Wide Channel, SCSI Id=7, 16 SCBs ahc0 waiting for scsi devices to settle (ahc0:0:0): "HP 2.13 GB 1st ### 1221" type 0 fixed SCSI 2 sd0(ahc0:0:0): Direct-Access 2033MB (4165272 512 byte sectors) (ahc0:5:0): "TOSHIBA CD-ROM XM-5301TA 1895" type 5 removable SCSI 2 cd0(ahc0:5:0): CD-ROM cd0(ahc0:5:0): NOT READY asc:3a,0 Medium not present can't get the size ahc1 rev 3 int a irq 10 on pci1:14 ahc1: Using left over BIOS settings ahc1: aic7870 Wide Channel, SCSI Id=6, 16 SCBs ahc1 waiting for scsi devices to settle (ahc1:4:0): "HP 2.13 GB 1st ### 1221" type 0 fixed SCSI 2 sd1(ahc1:4:0): Direct-Access 2033MB (4165272 512 byte sectors) Probing for devices on the ISA bus: sc0 at 0x60-0x6f irq 1 on motherboard sc0: VGA color <16 virtual consoles, flags=0x0> sio0 at 0x3f8-0x3ff irq 4 on isa sio0: type 16550A sio1 not found at 0x2f8 lpt0 not found at 0xffffffff mse0 not found at 0x23c fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa fdc0: NEC 72065B fd0: 1.44MB 3.5in wdc0 not found at 0x1f0 npx0 on motherboard npx0: INT 16 interface changing root device to sd0a vx0: strange connector type in EEPROM: assuming AUI vx0: strange connector type in EEPROM: assuming AUI vx0: strange connector type in EEPROM: assuming AUI ------------------------------------------------------------------------------- # SMP kernel config file options: options SMP # Symmetric MultiProcessor Kernel #options APIC_IO # Symmetric (APIC) I/O options NCPU=4 # number of CPUs options NBUS=4 # number of busses options NAPIC=1 # number of IO APICs options NINTR=16 # number of INTs ===============================================================================