Notes: - I ordered all parts (except POST card) from one vendor (Digikey) to keep life simple. - Some parts lack order numbers, such parts were actually scrounged from my junk box. - I'm not real happy with my choice of switches, mini bat-toggles would be nicer, but couldn't find them in momentary style. Other keycap colors are also available, and might look nicer... - The bezel is also available in a 'snap-in' model, which might be better than the adhesive mount I chose. - I chose to use wirewrap for the connections between the DB-15 connector and the 2 14 pin WW LED sockets. If you don't have WW tools you could use an IDC connector for this and solder to the 14 pin sockets. ------------------------------------------------------------------------------ item: part #: quantity: price: - POST card JDR Microdevices PCODE 1 49.95 - cabinet, 5.24 deep, 5.24 wide, 2.01 high: digikey HM163-ND (Hammond Mfg. 1598BBK) 1 10.67 - switches, SPST Momentary (Normally Open) thread mount: digikey CKN4001-ND (C&K TP11SHZQE) 3 4.17 - keycap for switches, red, yellow, orange: digikey CKN1114-ND (red, C&K 46580-3000) 1 .84 digikey CKN1115-ND (yel, C&K 46580-4000) 1 .84 digikey CKN1116-ND (org, C&K 46580-5000) 1 .84 - 1.8" bezel with smoke lens for LEDS: digikey PRD180LPS-ND (PRD plastics 6301040) 1 2.55 digikey PRDAS-ND (adhesive strip, 6000010) 1 .25 - LEDs: digikey ???-ND (red, ) 1 . digikey ???-ND (grn, ) 1 . digikey ???-ND (yel, ) 1 . - DB-15 connectors: digikey 615M-ND male WireWrap, (NorComp 15P4) 1 2.97 digikey ???-ND male IDC, () 2 . digikey ???-ND female IDC, () 4 . - DB-15 mounting hardware: digikey A9006-ND female screw lock 3 1.05 - speaker: - IC WireWrap sockets (for LED mounting): digikey -ND 14 pin () 2 . - plain perfboard for mounting colored LEDs and 7-segment LED sockets. approc 2" x 5.25". - 34 conductor IDC ribbon cable for connecting card to remote box. 2 lengths of 15 conductor would also work. I used 18 feet without problem. - 15 conductor IDC ribbon cable for connections in remote box (approx. 8") and POST card to motherboard (approx 20"). - berg crimpon .1" connectors, the style used for motherboard/cabinet connections such as RESET, speaker, etc. 3 x 2 pin for LEDs 2 x 2 pin for RESET/POWER switches 1 x 4 pin for speaker