build started at Sun Feb 18 17:30:06 MSK 2024 port directory: /usr/ports/net/openmpi package name: openmpi-5.0.1 building for: FreeBSD 150aarch64-dimaports 15.0-CURRENT FreeBSD 15.0-CURRENT 1500014 arm64 maintained by: ports@FreeBSD.org Makefile datestamp: -rw-r--r-- 1 1001 wheel 3373 Feb 18 10:30 /usr/ports/net/openmpi/Makefile Poudriere version: poudriere-git-3.4.99.20240122 Host OSVERSION: 1500014 Jail OSVERSION: 1500014 Job Id: ---Begin Environment--- SHELL=/bin/sh OSVERSION=1500014 UNAME_v=FreeBSD 15.0-CURRENT 1500014 UNAME_r=15.0-CURRENT BLOCKSIZE=K MAIL=/var/mail/root MM_CHARSET=UTF-8 LANG=C.UTF-8 STATUS=1 HOME=/root PATH=/sbin:/bin:/usr/sbin:/usr/bin:/usr/local/sbin:/usr/local/bin:/root/bin MAKE_OBJDIR_CHECK_WRITABLE=0 LOCALBASE=/usr/local USER=root POUDRIERE_NAME=poudriere-git TRYBROKEN=yes LIBEXECPREFIX=/usr/local/libexec/poudriere POUDRIERE_VERSION=3.4.99.20240122 MASTERMNT=/usr/local/poudriere/data/.m/150aarch64-dimaports/ref LC_COLLATE=C POUDRIERE_BUILD_TYPE=bulk PACKAGE_BUILDING=yes SAVED_TERM=tmux-256color OUTPUT_REDIRECTED_STDERR=4 OUTPUT_REDIRECTED=1 PWD=/usr/local/poudriere/data/.m/150aarch64-dimaports/ref/.p OUTPUT_REDIRECTED_STDOUT=3 NO_WARNING_PKG_INSTALL_EOL=yes P_PORTS_FEATURES=FLAVORS SUBPACKAGES SELECTED_OPTIONS MASTERNAME=150aarch64-dimaports SCRIPTPREFIX=/usr/local/share/poudriere SCRIPTNAME=testport.sh OLDPWD=/usr/local/poudriere/data/.m/150aarch64-dimaports/ref/.p POUDRIERE_PKGNAME=poudriere-git-3.4.99.20240122 SCRIPTPATH=/usr/local/share/poudriere/testport.sh POUDRIEREPATH=/usr/local/bin/poudriere ---End Environment--- ---Begin Poudriere Port Flags/Env--- PORT_FLAGS= PKGENV=PACKAGES=/tmp/pkgs PKGREPOSITORY=/tmp/pkgs PKGLATESTREPOSITORY=/tmp/pkgs/Latest FLAVOR= MAKE_ARGS= ---End Poudriere Port Flags/Env--- ---Begin OPTIONS List--- ===> The following configuration options are available for openmpi-5.0.1: DEBUG=off: Build with debugging support DOCS=on: Build and/or install documentation IPV6=on: IPv6 protocol support SLURM=off: Enable SLURM support TORQUE=off: Enable Torque support ===> Use 'make config' to modify these settings ---End OPTIONS List--- --MAINTAINER-- ports@FreeBSD.org --End MAINTAINER-- --CONFIGURE_ARGS-- --program-prefix= --with-hwloc=external --without-ofi --enable-mpi-fortran=usempif08 --with-libevent=external --enable-mca-no-build=verbs,btl_openib,oob_ud --with-wrapper-ldflags=-Wl,-rpath=-Wl,-rpath=/usr/local/lib/gcc13 --disable-io-romio --enable-mca-no-build=op-avx --disable-debug --enable-ipv6 --without-slurm --without-tm --prefix=/usr/local/mpi/openmpi ${_LATE_CONFIGURE_ARGS} --End CONFIGURE_ARGS-- --CONFIGURE_ENV-- F77="gfortran13" F90="gfortran13" FC="gfortran13" FFLAGS="-O -Wl,-rpath=/usr/local/lib/gcc13" F90FLAGS="-O -Wl,-rpath=/usr/local/lib/gcc13" FCFLAGS="-Wl,-rpath=/usr/local/lib/gcc13 -fallow-argument-mismatch" MAKE=gmake ac_cv_path_PERL=/usr/local/bin/perl ac_cv_path_PERL_PATH=/usr/local/bin/perl PERL_USE_UNSAFE_INC=1 PKG_CONFIG=pkgconf PYTHON="/usr/local/bin/python3.11" XDG_DATA_HOME=/wrkdirs/usr/ports/net/openmpi/work XDG_CONFIG_HOME=/wrkdirs/usr/ports/net/openmpi/work XDG_CACHE_HOME=/wrkdirs/usr/ports/net/openmpi/work/.cache HOME=/wrkdirs/usr/ports/net/openmpi/work TMPDIR="/tmp" PATH=/wrkdirs/usr/ports/net/openmpi/work/.bin:/sbin:/bin:/usr/sbin:/usr/bin:/usr/local/sbin:/usr/local/bin:/root/bin PKG_CONFIG_LIBDIR=/wrkdirs/usr/ports/net/openmpi/work/.pkgconfig:/usr/local/libdata/pkgconfig:/usr/local/share/pkgconfig:/usr/libdata/pkgconfig SHELL=/bin/sh CONFIG_SHELL=/bin/sh ADDR2LINE="/usr/local/bin/addr2line" AR="/usr/local/bin/ar" AS="/usr/local/bin/as" CPPFILT="/usr/local/bin/c++filt" GPROF="/usr/local/bin/gprof" LD="/usr/local/bin/ld" NM="/usr/local/bin/nm" OBJCOPY="/usr/local/bin/objcopy" OBJDUMP="/usr/local/bin/objdump" RANLIB="/usr/local/bin/ranlib" READELF="/usr/local/bin/readelf" SIZE="/usr/local/bin/size" STRINGS="/usr/local/bin/strings" CMAKE_PREFIX_PATH="/usr/local" CONFIG_SITE=/usr/ports/Templates/config.site lt_cv_sys_max_cmd_len=524288 --End CONFIGURE_ENV-- --MAKE_ENV-- F77="gfortran13" F90="gfortran13" FC="gfortran13" FFLAGS="-O -Wl,-rpath=/usr/local/lib/gcc13" F90FLAGS="-O -Wl,-rpath=/usr/local/lib/gcc13" FCFLAGS="-Wl,-rpath=/usr/local/lib/gcc13 -fallow-argument-mismatch" PERL_USE_UNSAFE_INC=1 XDG_DATA_HOME=/wrkdirs/usr/ports/net/openmpi/work XDG_CONFIG_HOME=/wrkdirs/usr/ports/net/openmpi/work XDG_CACHE_HOME=/wrkdirs/usr/ports/net/openmpi/work/.cache HOME=/wrkdirs/usr/ports/net/openmpi/work TMPDIR="/tmp" PATH=/wrkdirs/usr/ports/net/openmpi/work/.bin:/sbin:/bin:/usr/sbin:/usr/bin:/usr/local/sbin:/usr/local/bin:/root/bin PKG_CONFIG_LIBDIR=/wrkdirs/usr/ports/net/openmpi/work/.pkgconfig:/usr/local/libdata/pkgconfig:/usr/local/share/pkgconfig:/usr/libdata/pkgconfig MK_DEBUG_FILES=no MK_KERNEL_SYMBOLS=no SHELL=/bin/sh NO_LINT=YES ADDR2LINE="/usr/local/bin/addr2line" AR="/usr/local/bin/ar" AS="/usr/local/bin/as" CPPFILT="/usr/local/bin/c++filt" GPROF="/usr/local/bin/gprof" LD="/usr/local/bin/ld" NM="/usr/local/bin/nm" OBJCOPY="/usr/local/bin/objcopy" OBJDUMP="/usr/local/bin/objdump" RANLIB="/usr/local/bin/ranlib" READELF="/usr/local/bin/readelf" SIZE="/usr/local/bin/size" STRINGS="/usr/local/bin/strings" PREFIX=/usr/local LOCALBASE=/usr/local CC="cc" CFLAGS="-O2 -pipe -I/usr/local/include/gcc13 -fstack-protector-strong -isystem /usr/local/include -fno-strict-aliasing " CPP="cpp" CPPFLAGS="-isystem /usr/local/include" LDFLAGS=" -Wl,-rpath=/usr/local/lib/gcc13 -L/usr/local/lib/gcc13 -fstack-protector-strong " LIBS="-L/usr/local/lib" CXX="c++" CXXFLAGS="-O2 -pipe -I/usr/local/include/gcc13 -fstack-protector-strong -isystem /usr/local/include -fno-strict-aliasing -isystem /usr/local/include " BSD_INSTALL_PROGRAM="install -s -m 555" BSD_INSTALL_LIB="install -s -m 0644" BSD_INSTALL_SCRIPT="install -m 555" BSD_INSTALL_DATA="install -m 0644" BSD_INSTALL_MAN="install -m 444" --End MAKE_ENV-- --PLIST_SUB-- MPIDIR=mpi/openmpi PORTDOCS="" AVX="@comment " NO_AVX="" DEBUG="@comment " NO_DEBUG="" DOCS="" NO_DOCS="@comment " IPV6="" NO_IPV6="@comment " SLURM="@comment " NO_SLURM="" TORQUE="@comment " NO_TORQUE="" PYTHON_INCLUDEDIR=include/python3.11 PYTHON_LIBDIR=lib/python3.11 PYTHON_PLATFORM=freebsd15 PYTHON_SITELIBDIR=lib/python3.11/site-packages PYTHON_SUFFIX=311 PYTHON_EXT_SUFFIX=.cpython-311 PYTHON_VER=3.11 PYTHON_VERSION=python3.11 PYTHON2="@comment " PYTHON3="" NO_MCA_PATCHER_OVERWRITE="" SHORTFLOAT="" OSREL=15.0 PREFIX=%D LOCALBASE=/usr/local RESETPREFIX=/usr/local LIB32DIR=lib PERL_VERSION=5.38.2 PERL_VER=5.38 PERL5_MAN1=lib/perl5/site_perl/man/man1 PERL5_MAN3=lib/perl5/site_perl/man/man3 SITE_PERL=lib/perl5/site_perl SITE_ARCH=lib/perl5/site_perl/mach/5.38 DOCSDIR="share/doc/openmpi" EXAMPLESDIR="share/examples/openmpi" DATADIR="share/openmpi" WWWDIR="www/openmpi" ETCDIR="etc/openmpi" --End PLIST_SUB-- --SUB_LIST-- AVX="@comment " NO_AVX="" DEBUG="@comment " NO_DEBUG="" DOCS="" NO_DOCS="@comment " IPV6="" NO_IPV6="@comment " SLURM="@comment " NO_SLURM="" TORQUE="@comment " NO_TORQUE="" PYTHON_INCLUDEDIR=/usr/local/include/python3.11 PYTHON_LIBDIR=/usr/local/lib/python3.11 PYTHON_PLATFORM=freebsd15 PYTHON_SITELIBDIR=/usr/local/lib/python3.11/site-packages PYTHON_SUFFIX=311 PYTHON_EXT_SUFFIX=.cpython-311 PYTHON_VER=3.11 PYTHON_VERSION=python3.11 PYTHON2="@comment " PYTHON3="" PREFIX=/usr/local LOCALBASE=/usr/local DATADIR=/usr/local/share/openmpi DOCSDIR=/usr/local/share/doc/openmpi EXAMPLESDIR=/usr/local/share/examples/openmpi WWWDIR=/usr/local/www/openmpi ETCDIR=/usr/local/etc/openmpi --End SUB_LIST-- ---Begin make.conf--- USE_PACKAGE_DEPENDS=yes BATCH=yes WRKDIRPREFIX=/wrkdirs PORTSDIR=/usr/ports PACKAGES=/packages DISTDIR=/distfiles OVERLAYS+=/overlays/testports OVERLAYS+=/overlays/libreoffice OVERLAYS+=/overlays/boost FORCE_PACKAGE=yes PACKAGE_BUILDING=yes PACKAGE_BUILDING_FLAVORS=yes #### #### # ==== Common settings start ==== # # www/apache24 WITH_MPM=event # mail/spamd .if ${.CURDIR:M*/mail/spamd*} CPANEL=yes .endif .if ${.CURDIR:M*/games/openttd*} WITH_FLUIDSYNTH= yes WITH_OPEN_GAME_FILES= yes WITH_SAVE_PASSWORDS= yes .endif #MASTER_SITE_OVERRIDE= http://build.dimapanov.com/distfiles/${DIST_SUBDIR}/ #_LIST_OF_WITH_FEATURES= debug lto ssp pie relro bind_now _DEFAULT_WITH_FEATURES= ssp pie relro bind_now _LICENSE_STATUS= accepted #PKG_COMPRESSION_FORMAT= txz PKG_COMPRESSION_FORMAT= tzst PKG_COMPRESSION_LEVEL= fast PKG_CREATE_VERBOSE= yes BUILD_ALL_PYTHON_FLAVORS=yes DEFAULT_VERSIONS+=ssl=base DEFAULT_VERSIONS+=linux=c7 DEFAULT_VERSIONS+=varnish=7 #DEFAULT_VERSIONS+=librsvg2=legacy DEFAULT_VERSIONS+=imagemagick=7 # lang DEFAULT_VERSIONS+=java=17 DEFAULT_VERSIONS+=lua=5.4 #DEFAULT_VERSIONS+=mono=6.8 DEFAULT_VERSIONS+=perl5=5.38 DEFAULT_VERSIONS+=php=8.2 DEFAULT_VERSIONS+=python=3.11 DEFAULT_VERSIONS+=python3=3.11 DEFAULT_VERSIONS+=ruby=3.1 #DEFAULT_VERSIONS+=tcltk=8.6 # db DEFAULT_VERSIONS+=bdb=5 DEFAULT_VERSIONS+=openldap=26 DEFAULT_VERSIONS+=mysql=8.0 DEFAULT_VERSIONS+=pgsql=15 # misc DEFAULT_VERSIONS+=samba=4.16 #DEFAULT_VERSIONS+=nodejs=current DEFAULT_VERSIONS+=gcc=13 DEFAULT_VERSIONS+=llvm=17 MESA_LLVM_VER=17 VBOX_LLVM_VER=15 LLVM_VER=17 # LTO_UNSAFE= yes OPTIONS_UNSET+= LTO OPTIONS_UNSET+= LTO_BOOTSTRAP OPTIONS_UNSET+= XINE # ==== Common settings end ==== #### #### # # ==== Jail settings start ==== # # ==== Jail settings end ==== WITH_CCACHE_BUILD=yes CCACHE_DIR=/root/.ccache #### Misc Poudriere #### .include "/etc/make.conf.ports_env" GID=0 UID=0 ---End make.conf--- --Resource limits-- cpu time (seconds, -t) unlimited file size (512-blocks, -f) unlimited data seg size (kbytes, -d) 1048576 stack size (kbytes, -s) 1048576 core file size (512-blocks, -c) unlimited max memory size (kbytes, -m) unlimited locked memory (kbytes, -l) unlimited max user processes (-u) 12186 open files (-n) 2048 virtual mem size (kbytes, -v) unlimited swap limit (kbytes, -w) unlimited socket buffer size (bytes, -b) unlimited pseudo-terminals (-p) unlimited kqueues (-k) unlimited umtx shared locks (-o) unlimited --End resource limits-- =================================================== ===== env: DEVELOPER_MODE=yes DEVELOPER=1 STRICT_DEPENDS=yes USER=root UID=0 GID=0 ===> NOTICE: The openmpi port currently does not have a maintainer. As a result, it is more likely to have unresolved issues, not be up-to-date, or even be removed in the future. To volunteer to maintain this port, please create an issue at: https://bugs.freebsd.org/bugzilla More information about port maintainership is available at: https://docs.freebsd.org/en/articles/contributing/#ports-contributing ===> License BSD3CLAUSE accepted by the user =========================================================================== =================================================== ===== env: DEVELOPER_MODE=yes USE_PACKAGE_DEPENDS_ONLY=1 USER=root UID=0 GID=0 ===> openmpi-5.0.1 depends on file: /usr/local/sbin/pkg - not found ===> Installing existing package /packages/All/pkg-1.20.9_1.pkg [150aarch64-dimaports] Installing pkg-1.20.9_1... [150aarch64-dimaports] Extracting pkg-1.20.9_1: .......... done ===> openmpi-5.0.1 depends on file: /usr/local/sbin/pkg - found ===> Returning to build of openmpi-5.0.1 =========================================================================== =================================================== ===== env: DEVELOPER_MODE=yes USE_PACKAGE_DEPENDS_ONLY=1 USER=root UID=0 GID=0 =========================================================================== =================================================== ===== env: DEVELOPER_MODE=yes STRICT_DEPENDS=yes USER=root UID=0 GID=0 ===> NOTICE: The openmpi port currently does not have a maintainer. As a result, it is more likely to have unresolved issues, not be up-to-date, or even be removed in the future. To volunteer to maintain this port, please create an issue at: https://bugs.freebsd.org/bugzilla More information about port maintainership is available at: https://docs.freebsd.org/en/articles/contributing/#ports-contributing ===> License BSD3CLAUSE accepted by the user ===> openmpi-5.0.1 depends on file: /usr/local/sbin/pkg - found ===> Fetching all distfiles required by openmpi-5.0.1 for building =========================================================================== =================================================== ===== env: DEVELOPER_MODE=yes STRICT_DEPENDS=yes USER=root UID=0 GID=0 ===> NOTICE: The openmpi port currently does not have a maintainer. As a result, it is more likely to have unresolved issues, not be up-to-date, or even be removed in the future. To volunteer to maintain this port, please create an issue at: https://bugs.freebsd.org/bugzilla More information about port maintainership is available at: https://docs.freebsd.org/en/articles/contributing/#ports-contributing ===> License BSD3CLAUSE accepted by the user ===> openmpi-5.0.1 depends on file: /usr/local/sbin/pkg - found ===> Fetching all distfiles required by openmpi-5.0.1 for building => SHA256 Checksum OK for openmpi-5.0.1.tar.bz2. =========================================================================== =================================================== ===== env: DEVELOPER_MODE=yes USE_PACKAGE_DEPENDS_ONLY=1 USER=root UID=0 GID=0 =========================================================================== =================================================== ===== env: DEVELOPER_MODE=yes STRICT_DEPENDS=yes USER=root UID=0 GID=0 ===> NOTICE: The openmpi port currently does not have a maintainer. As a result, it is more likely to have unresolved issues, not be up-to-date, or even be removed in the future. To volunteer to maintain this port, please create an issue at: https://bugs.freebsd.org/bugzilla More information about port maintainership is available at: https://docs.freebsd.org/en/articles/contributing/#ports-contributing ===> License BSD3CLAUSE accepted by the user ===> openmpi-5.0.1 depends on file: /usr/local/sbin/pkg - found ===> Fetching all distfiles required by openmpi-5.0.1 for building ===> Extracting for openmpi-5.0.1 => SHA256 Checksum OK for openmpi-5.0.1.tar.bz2. =========================================================================== =================================================== ===== env: DEVELOPER_MODE=yes USE_PACKAGE_DEPENDS_ONLY=1 USER=root UID=0 GID=0 =========================================================================== =================================================== ===== env: DEVELOPER_MODE=yes DEVELOPER=1 STRICT_DEPENDS=yes USER=root UID=0 GID=0 ===> Patching for openmpi-5.0.1 ===> Applying FreeBSD patches for openmpi-5.0.1 from /usr/ports/net/openmpi/files =========================================================================== =================================================== ===== env: DEVELOPER_MODE=yes USE_PACKAGE_DEPENDS_ONLY=1 USER=root UID=0 GID=0 ===> openmpi-5.0.1 depends on package: py311-sphinx>0 - not found ===> Installing existing package /packages/All/py311-sphinx-5.3.0_1,1.pkg [150aarch64-dimaports] Installing py311-sphinx-5.3.0_1,1... [150aarch64-dimaports] `-- Installing ca_root_nss-3.93_2... [150aarch64-dimaports] `-- Extracting ca_root_nss-3.93_2: ...... done certctl: Skipping untrusted certificate f3377b1b (/etc/ssl/untrusted/f3377b1b.0) [150aarch64-dimaports] `-- Installing py311-Babel-2.14.0... [150aarch64-dimaports] | `-- Installing py311-setuptools-63.1.0_1... [150aarch64-dimaports] | | `-- Installing python311-3.11.8... [150aarch64-dimaports] | | `-- Installing gettext-runtime-0.22.3_1... [150aarch64-dimaports] | | | `-- Installing indexinfo-0.3.1... [150aarch64-dimaports] | | | `-- Extracting indexinfo-0.3.1: .... done [150aarch64-dimaports] | | `-- Extracting gettext-runtime-0.22.3_1: .......... done [150aarch64-dimaports] | | `-- Installing libffi-3.4.4_1... [150aarch64-dimaports] | | `-- Extracting libffi-3.4.4_1: .......... done [150aarch64-dimaports] | | `-- Installing mpdecimal-2.5.1... [150aarch64-dimaports] | | `-- Extracting mpdecimal-2.5.1: .......... done [150aarch64-dimaports] | | `-- Installing readline-8.2.7_1... [150aarch64-dimaports] | | `-- Extracting readline-8.2.7_1: .......... done [150aarch64-dimaports] | | `-- Extracting python311-3.11.8: .......... done [150aarch64-dimaports] | `-- Extracting py311-setuptools-63.1.0_1: .......... done [150aarch64-dimaports] `-- Extracting py311-Babel-2.14.0: .......... done [150aarch64-dimaports] `-- Installing py311-Jinja2-3.1.3... [150aarch64-dimaports] | `-- Installing py311-markupsafe-2.1.3... [150aarch64-dimaports] | `-- Extracting py311-markupsafe-2.1.3: .......... done [150aarch64-dimaports] `-- Extracting py311-Jinja2-3.1.3: .......... done [150aarch64-dimaports] `-- Installing py311-alabaster-0.7.13... [150aarch64-dimaports] `-- Extracting py311-alabaster-0.7.13: .......... done [150aarch64-dimaports] `-- Installing py311-docutils-0.19,1... [150aarch64-dimaports] | `-- Installing py311-pygments-2.17.2... [150aarch64-dimaports] | `-- Extracting py311-pygments-2.17.2: .......... done [150aarch64-dimaports] `-- Extracting py311-docutils-0.19,1: .......... done [150aarch64-dimaports] `-- Installing py311-imagesize-1.4.1... [150aarch64-dimaports] `-- Extracting py311-imagesize-1.4.1: .......... done [150aarch64-dimaports] `-- Installing py311-packaging-23.2... [150aarch64-dimaports] `-- Extracting py311-packaging-23.2: .......... done [150aarch64-dimaports] `-- Installing py311-requests-2.31.0... [150aarch64-dimaports] | `-- Installing py311-certifi-2023.11.17... [150aarch64-dimaports] | `-- Extracting py311-certifi-2023.11.17: .......... done [150aarch64-dimaports] | `-- Installing py311-charset-normalizer-3.3.2... [150aarch64-dimaports] | `-- Extracting py311-charset-normalizer-3.3.2: .......... done [150aarch64-dimaports] | `-- Installing py311-idna-3.6... [150aarch64-dimaports] | `-- Extracting py311-idna-3.6: .......... done [150aarch64-dimaports] | `-- Installing py311-pysocks-1.7.1... [150aarch64-dimaports] | `-- Extracting py311-pysocks-1.7.1: .......... done [150aarch64-dimaports] | `-- Installing py311-urllib3-1.26.18,1... [150aarch64-dimaports] | | `-- Installing py311-brotli-1.1.0... [150aarch64-dimaports] | | `-- Installing brotli-1.1.0,1... [150aarch64-dimaports] | | `-- Extracting brotli-1.1.0,1: .......... done [150aarch64-dimaports] | | `-- Extracting py311-brotli-1.1.0: .......... done [150aarch64-dimaports] | | `-- Installing py311-cryptography-41.0.7_2,1... [150aarch64-dimaports] | | `-- Installing py311-bcrypt-3.2.2_1... [150aarch64-dimaports] | | | `-- Installing py311-cffi-1.16.0... [150aarch64-dimaports] | | | `-- Installing py311-pycparser-2.21... [150aarch64-dimaports] | | | `-- Extracting py311-pycparser-2.21: .......... done [150aarch64-dimaports] | | | `-- Extracting py311-cffi-1.16.0: .......... done [150aarch64-dimaports] | | `-- Extracting py311-bcrypt-3.2.2_1: .......... done [150aarch64-dimaports] | | `-- Extracting py311-cryptography-41.0.7_2,1: .......... done [150aarch64-dimaports] | | `-- Installing py311-openssl-23.2.0,1... [150aarch64-dimaports] | | `-- Extracting py311-openssl-23.2.0,1: .......... done [150aarch64-dimaports] | `-- Extracting py311-urllib3-1.26.18,1: .......... done [150aarch64-dimaports] `-- Extracting py311-requests-2.31.0: .......... done [150aarch64-dimaports] `-- Installing py311-snowballstemmer-2.2.0... [150aarch64-dimaports] | `-- Installing py311-pystemmer-2.0.1... [150aarch64-dimaports] | `-- Extracting py311-pystemmer-2.0.1: ......... done [150aarch64-dimaports] `-- Extracting py311-snowballstemmer-2.2.0: .......... done [150aarch64-dimaports] `-- Installing py311-sphinxcontrib-applehelp-1.0.2... [150aarch64-dimaports] `-- Extracting py311-sphinxcontrib-applehelp-1.0.2: .......... done [150aarch64-dimaports] `-- Installing py311-sphinxcontrib-devhelp-1.0.2... [150aarch64-dimaports] `-- Extracting py311-sphinxcontrib-devhelp-1.0.2: .......... done [150aarch64-dimaports] `-- Installing py311-sphinxcontrib-htmlhelp-2.0.0... [150aarch64-dimaports] `-- Extracting py311-sphinxcontrib-htmlhelp-2.0.0: .......... done [150aarch64-dimaports] `-- Installing py311-sphinxcontrib-jsmath-1.0.1... [150aarch64-dimaports] `-- Extracting py311-sphinxcontrib-jsmath-1.0.1: .......... done [150aarch64-dimaports] `-- Installing py311-sphinxcontrib-qthelp-1.0.3... [150aarch64-dimaports] `-- Extracting py311-sphinxcontrib-qthelp-1.0.3: .......... done [150aarch64-dimaports] `-- Installing py311-sphinxcontrib-serializinghtml-1.1.5... [150aarch64-dimaports] `-- Extracting py311-sphinxcontrib-serializinghtml-1.1.5: .......... done [150aarch64-dimaports] Extracting py311-sphinx-5.3.0_1,1: .......... done ===== Message from ca_root_nss-3.93_2: -- FreeBSD does not, and can not warrant that the certification authorities whose certificates are included in this package have in any way been audited for trustworthiness or RFC 3647 compliance. Assessment and verification of trust is the complete responsibility of the system administrator. This package installs symlinks to support root certificate discovery for software that either uses other cryptographic libraries than OpenSSL, or use OpenSSL but do not follow recommended practice. If you prefer to do this manually, replace the following symlinks with either an empty file or your site-local certificate bundle. * /etc/ssl/cert.pem * /usr/local/etc/ssl/cert.pem * /usr/local/openssl/cert.pem ===== Message from python311-3.11.8: -- Note that some standard Python modules are provided as separate ports as they require additional dependencies. They are available as: py311-gdbm databases/py-gdbm@py311 py311-sqlite3 databases/py-sqlite3@py311 py311-tkinter x11-toolkits/py-tkinter@py311 ===== Message from py311-urllib3-1.26.18,1: -- Since version 1.25 HTTPS connections are now verified by default which is done via "cert_reqs = 'CERT_REQUIRED'". While certificate verification can be disabled via "cert_reqs = 'CERT_NONE'", it's highly recommended to leave it on. Various consumers of net/py-urllib3 already have implemented routines that either explicitly enable or disable HTTPS certificate verification (e.g. via configuration settings, CLI arguments, etc.). Yet it may happen that there are still some consumers which don't explicitly enable/disable certificate verification for HTTPS connections which could then lead to errors (as is often the case with self-signed certificates). In case of an error one should try first to temporarily disable certificate verification of the problematic urllib3 consumer to see if that approach will remedy the issue. ===> openmpi-5.0.1 depends on package: py311-sphinx>0 - found ===> Returning to build of openmpi-5.0.1 ===> openmpi-5.0.1 depends on package: py311-recommonmark>0 - not found ===> Installing existing package /packages/All/py311-recommonmark-0.5.0_2.pkg [150aarch64-dimaports] Installing py311-recommonmark-0.5.0_2... [150aarch64-dimaports] `-- Installing py311-CommonMark-0.9.1_1... [150aarch64-dimaports] | `-- Installing py311-future-0.18.3... [150aarch64-dimaports] | `-- Extracting py311-future-0.18.3: .......... done [150aarch64-dimaports] `-- Extracting py311-CommonMark-0.9.1_1: .......... done [150aarch64-dimaports] Extracting py311-recommonmark-0.5.0_2: .......... done ===> openmpi-5.0.1 depends on package: py311-recommonmark>0 - found ===> Returning to build of openmpi-5.0.1 ===> openmpi-5.0.1 depends on package: py311-sphinx_rtd_theme>0 - not found ===> Installing existing package /packages/All/py311-sphinx_rtd_theme-1.0.0.pkg [150aarch64-dimaports] Installing py311-sphinx_rtd_theme-1.0.0... [150aarch64-dimaports] Extracting py311-sphinx_rtd_theme-1.0.0: .......... done ===> openmpi-5.0.1 depends on package: py311-sphinx_rtd_theme>0 - found ===> Returning to build of openmpi-5.0.1 ===> openmpi-5.0.1 depends on executable: gfortran13 - not found ===> Installing existing package /packages/All/gcc13-13.2.0_4.pkg [150aarch64-dimaports] Installing gcc13-13.2.0_4... [150aarch64-dimaports] `-- Installing binutils-2.40_5,1... [150aarch64-dimaports] | `-- Installing zstd-1.5.5_1... [150aarch64-dimaports] | | `-- Installing liblz4-1.9.4_1,1... [150aarch64-dimaports] | | `-- Extracting liblz4-1.9.4_1,1: .......... done [150aarch64-dimaports] | `-- Extracting zstd-1.5.5_1: .......... done [150aarch64-dimaports] `-- Extracting binutils-2.40_5,1: .......... done [150aarch64-dimaports] `-- Installing gmp-6.3.0... [150aarch64-dimaports] `-- Extracting gmp-6.3.0: .......... done [150aarch64-dimaports] `-- Installing isl-0.26... [150aarch64-dimaports] `-- Extracting isl-0.26: .......... done [150aarch64-dimaports] `-- Installing mpc-1.3.1_1... [150aarch64-dimaports] | `-- Installing mpfr-4.2.1,1... [150aarch64-dimaports] | `-- Extracting mpfr-4.2.1,1: .......... done [150aarch64-dimaports] `-- Extracting mpc-1.3.1_1: ......... done [150aarch64-dimaports] Extracting gcc13-13.2.0_4: .......... done ===== Message from gcc13-13.2.0_4: -- To ensure binaries built with this toolchain find appropriate versions of the necessary run-time libraries, you may want to link using -Wl,-rpath=/usr/local/lib/gcc13 For ports leveraging USE_GCC, USES=compiler, or USES=fortran this happens transparently. ===> openmpi-5.0.1 depends on executable: gfortran13 - found ===> Returning to build of openmpi-5.0.1 ===> openmpi-5.0.1 depends on package: gmake>=4.3 - not found ===> Installing existing package /packages/All/gmake-4.3_3.pkg [150aarch64-dimaports] Installing gmake-4.3_3... [150aarch64-dimaports] Extracting gmake-4.3_3: .......... done ===> openmpi-5.0.1 depends on package: gmake>=4.3 - found ===> Returning to build of openmpi-5.0.1 ===> openmpi-5.0.1 depends on package: pkgconf>=1.3.0_1 - not found ===> Installing existing package /packages/All/pkgconf-2.0.3_2,1.pkg [150aarch64-dimaports] Installing pkgconf-2.0.3_2,1... [150aarch64-dimaports] Extracting pkgconf-2.0.3_2,1: .......... done ===> openmpi-5.0.1 depends on package: pkgconf>=1.3.0_1 - found ===> Returning to build of openmpi-5.0.1 ===> openmpi-5.0.1 depends on file: /usr/local/bin/python3.11 - found ===> openmpi-5.0.1 depends on file: /usr/local/bin/as - found ===> openmpi-5.0.1 depends on package: perl5>=5.38.r<5.39 - not found ===> Installing existing package /packages/All/perl5-5.38.2_1.pkg [150aarch64-dimaports] Installing perl5-5.38.2_1... [150aarch64-dimaports] Extracting perl5-5.38.2_1: .......... done ===> openmpi-5.0.1 depends on package: perl5>=5.38.r<5.39 - found ===> Returning to build of openmpi-5.0.1 ===> openmpi-5.0.1 depends on file: /usr/local/bin/ccache - not found ===> Installing existing package /packages/All/ccache-3.7.12_5.pkg [150aarch64-dimaports] Installing ccache-3.7.12_5... [150aarch64-dimaports] Extracting ccache-3.7.12_5: .......... done Create compiler links... create symlink for cc create symlink for cc (world) create symlink for c++ create symlink for c++ (world) create symlink for CC create symlink for CC (world) create symlink for gcc13 create symlink for gcc13 (world) create symlink for g++13 create symlink for g++13 (world) create symlink for cpp13 create symlink for cpp13 (world) create symlink for clang create symlink for clang (world) create symlink for clang++ create symlink for clang++ (world) ===== Message from ccache-3.7.12_5: -- NOTE: Please read /usr/local/share/doc/ccache/ccache-howto-freebsd.txt for information on using ccache with FreeBSD ports and src. ===> openmpi-5.0.1 depends on file: /usr/local/bin/ccache - found ===> Returning to build of openmpi-5.0.1 =========================================================================== =================================================== ===== env: DEVELOPER_MODE=yes USE_PACKAGE_DEPENDS_ONLY=1 USER=root UID=0 GID=0 ===> openmpi-5.0.1 depends on shared library: libhwloc.so.15 - not found ===> Installing existing package /packages/All/hwloc2-2.8.0_1.pkg [150aarch64-dimaports] Installing hwloc2-2.8.0_1... [150aarch64-dimaports] `-- Installing cairo-1.17.4_2,3... [150aarch64-dimaports] | `-- Installing fontconfig-2.15.0_2,1... [150aarch64-dimaports] | | `-- Installing expat-2.5.0_1... [150aarch64-dimaports] | | `-- Extracting expat-2.5.0_1: .......... done [150aarch64-dimaports] | | `-- Installing freetype2-2.13.2... [150aarch64-dimaports] | | `-- Installing png-1.6.42... [150aarch64-dimaports] | | `-- Extracting png-1.6.42: .......... done [150aarch64-dimaports] | | `-- Extracting freetype2-2.13.2: .......... done [150aarch64-dimaports] | `-- Extracting fontconfig-2.15.0_2,1: .......... done [150aarch64-dimaports] | `-- Installing glib-2.78.4,2... [150aarch64-dimaports] | | `-- Installing libiconv-1.17... [150aarch64-dimaports] | | `-- Extracting libiconv-1.17: .......... done [150aarch64-dimaports] | | `-- Installing libxml2-2.11.6... [150aarch64-dimaports] | | `-- Installing icu-74.2,1... [150aarch64-dimaports] | | `-- Extracting icu-74.2,1: .......... done [150aarch64-dimaports] | | `-- Extracting libxml2-2.11.6: .......... done [150aarch64-dimaports] | | `-- Installing pcre2-10.42_1... [150aarch64-dimaports] | | `-- Installing libedit-3.1.20230828_1,1... [150aarch64-dimaports] | | `-- Extracting libedit-3.1.20230828_1,1: .......... done [150aarch64-dimaports] | | `-- Extracting pcre2-10.42_1: .......... done [150aarch64-dimaports] | `-- Extracting glib-2.78.4,2: .......... done [150aarch64-dimaports] | `-- Installing libX11-1.8.7_1,1... [150aarch64-dimaports] | | `-- Installing libxcb-1.15_2... [150aarch64-dimaports] | | `-- Installing libXau-1.0.9_1... [150aarch64-dimaports] | | `-- Extracting libXau-1.0.9_1: .......... done [150aarch64-dimaports] | | `-- Installing libXdmcp-1.1.3... [150aarch64-dimaports] | | | `-- Installing xorgproto-2023.2... [150aarch64-dimaports] | | | `-- Extracting xorgproto-2023.2: .......... done [150aarch64-dimaports] | | `-- Extracting libXdmcp-1.1.3: ......... done [150aarch64-dimaports] | | `-- Extracting libxcb-1.15_2: .......... done [150aarch64-dimaports] | `-- Extracting libX11-1.8.7_1,1: .......... done [150aarch64-dimaports] | `-- Installing libXext-1.3.6,1... [150aarch64-dimaports] | `-- Extracting libXext-1.3.6,1: .......... done [150aarch64-dimaports] | `-- Installing libXrender-0.9.10_2... [150aarch64-dimaports] | `-- Extracting libXrender-0.9.10_2: .......... done [150aarch64-dimaports] | `-- Installing libglvnd-1.7.0... [150aarch64-dimaports] | `-- Extracting libglvnd-1.7.0: .......... done [150aarch64-dimaports] | `-- Installing pixman-0.42.2... [150aarch64-dimaports] | `-- Extracting pixman-0.42.2: .......... done [150aarch64-dimaports] `-- Extracting cairo-1.17.4_2,3: .......... done [150aarch64-dimaports] `-- Installing level-zero-1.15.8... [150aarch64-dimaports] `-- Extracting level-zero-1.15.8: .......... done [150aarch64-dimaports] `-- Installing libpciaccess-0.18... [150aarch64-dimaports] `-- Extracting libpciaccess-0.18: ........ done [150aarch64-dimaports] Extracting hwloc2-2.8.0_1: .......... done ==> Running trigger: fontconfig.ucl Running fc-cache to build fontconfig cache... ==> Running trigger: gio-modules.ucl Generating GIO modules cache ==> Running trigger: glib-schemas.ucl Compiling glib schemas No schema files found: doing nothing. ===== Message from freetype2-2.13.2: -- The 2.7.x series now uses the new subpixel hinting mode (V40 port's option) as the default, emulating a modern version of ClearType. This change inevitably leads to different rendering results, and you might change port's options to adapt it to your taste (or use the new "FREETYPE_PROPERTIES" environment variable). The environment variable "FREETYPE_PROPERTIES" can be used to control the driver properties. Example: FREETYPE_PROPERTIES=truetype:interpreter-version=35 \ cff:no-stem-darkening=1 \ autofitter:warping=1 This allows to select, say, the subpixel hinting mode at runtime for a given application. If LONG_PCF_NAMES port's option was enabled, the PCF family names may include the foundry and information whether they contain wide characters. For example, "Sony Fixed" or "Misc Fixed Wide", instead of "Fixed". This can be disabled at run time with using pcf:no-long-family-names property, if needed. Example: FREETYPE_PROPERTIES=pcf:no-long-family-names=1 How to recreate fontconfig cache with using such environment variable, if needed: # env FREETYPE_PROPERTIES=pcf:no-long-family-names=1 fc-cache -fsv The controllable properties are listed in the section "Controlling FreeType Modules" in the reference's table of contents (/usr/local/share/doc/freetype2/reference/index.html, if documentation was installed). ===> openmpi-5.0.1 depends on shared library: libhwloc.so.15 - found (/usr/local/lib/libhwloc.so.15) ===> Returning to build of openmpi-5.0.1 ===> openmpi-5.0.1 depends on shared library: libevent.so - not found ===> Installing existing package /packages/All/libevent-2.1.12.pkg [150aarch64-dimaports] Installing libevent-2.1.12... [150aarch64-dimaports] Extracting libevent-2.1.12: .......... done ===> openmpi-5.0.1 depends on shared library: libevent.so - found (/usr/local/lib/libevent.so) ===> Returning to build of openmpi-5.0.1 ===> openmpi-5.0.1 depends on shared library: libmunge.so - not found ===> Installing existing package /packages/All/munge-0.5.15_1.pkg [150aarch64-dimaports] Installing munge-0.5.15_1... [150aarch64-dimaports] `-- Installing libgcrypt-1.10.3_1... [150aarch64-dimaports] | `-- Installing libgpg-error-1.47_1... [150aarch64-dimaports] | `-- Extracting libgpg-error-1.47_1: .......... done [150aarch64-dimaports] `-- Extracting libgcrypt-1.10.3_1: .......... done [150aarch64-dimaports] Extracting munge-0.5.15_1: ......... done ===> openmpi-5.0.1 depends on shared library: libmunge.so - found (/usr/local/lib/libmunge.so) ===> Returning to build of openmpi-5.0.1 ===> openmpi-5.0.1 depends on shared library: libze_loader.so - found (/usr/local/lib/libze_loader.so) =========================================================================== =>> Recording filesystem state for prebuild... done =================================================== ===== env: DEVELOPER_MODE=yes STRICT_DEPENDS=yes USER=root UID=0 GID=0 ===> openmpi-5.0.1 depends on package: py311-sphinx>0 - found ===> openmpi-5.0.1 depends on package: py311-recommonmark>0 - found ===> openmpi-5.0.1 depends on package: py311-sphinx_rtd_theme>0 - found ===> openmpi-5.0.1 depends on executable: gfortran13 - found ===> openmpi-5.0.1 depends on package: gmake>=4.3 - found ===> openmpi-5.0.1 depends on package: pkgconf>=1.3.0_1 - found ===> openmpi-5.0.1 depends on file: /usr/local/bin/python3.11 - found ===> openmpi-5.0.1 depends on file: /usr/local/bin/as - found ===> openmpi-5.0.1 depends on package: perl5>=5.38.r<5.39 - found ===> openmpi-5.0.1 depends on file: /usr/local/bin/ccache - found ===> openmpi-5.0.1 depends on shared library: libhwloc.so.15 - found (/usr/local/lib/libhwloc.so.15) ===> openmpi-5.0.1 depends on shared library: libevent.so - found (/usr/local/lib/libevent.so) ===> openmpi-5.0.1 depends on shared library: libmunge.so - found (/usr/local/lib/libmunge.so) ===> openmpi-5.0.1 depends on shared library: libze_loader.so - found (/usr/local/lib/libze_loader.so) ===> Configuring for openmpi-5.0.1 /usr/bin/sed -i.bak -e 's|$(libdir)/pkgconfig|/usr/local/libdata/pkgconfig|g' /wrkdirs/usr/ports/net/openmpi/work/openmpi-5.0.1/oshmem/tools/wrappers/Makefile.in /usr/bin/sed -i.bak -e 's|$(libdir)/pkgconfig|/usr/local/libdata/pkgconfig|g' /wrkdirs/usr/ports/net/openmpi/work/openmpi-5.0.1/opal/tools/wrappers/Makefile.in /usr/bin/sed -i.bak -e 's|$(libdir)/pkgconfig|/usr/local/libdata/pkgconfig|g' /wrkdirs/usr/ports/net/openmpi/work/openmpi-5.0.1/3rd-party/openpmix/Makefile.in /usr/bin/sed -i.bak -e 's|$(libdir)/pkgconfig|/usr/local/libdata/pkgconfig|g' /wrkdirs/usr/ports/net/openmpi/work/openmpi-5.0.1/ompi/tools/wrappers/Makefile.in ===> FreeBSD 10 autotools fix applied to /wrkdirs/usr/ports/net/openmpi/work/openmpi-5.0.1/3rd-party/romio341/mpl/confdb/config.rpath ===> FreeBSD 10 autotools fix applied to /wrkdirs/usr/ports/net/openmpi/work/openmpi-5.0.1/3rd-party/romio341/confdb/config.rpath configure: loading site script /usr/ports/Templates/config.site ============================================================================ == Configuring Open MPI ============================================================================ *** Prerequisites checking for a sed that does not truncate output... (cached) /usr/bin/sed checking for perl... perl *** Startup tests checking build system type... aarch64-portbld-freebsd15.0 checking host system type... aarch64-portbld-freebsd15.0 checking target system type... aarch64-portbld-freebsd15.0 checking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane... yes checking for a race-free mkdir -p... (cached) /bin/mkdir -p checking for gawk... (cached) /usr/bin/awk checking whether gmake sets $(MAKE)... yes checking whether gmake supports nested variables... yes checking whether UID '0' is supported by ustar format... yes checking whether GID '0' is supported by ustar format... yes checking how to create a ustar tar archive... (cached) /usr/bin/tar checking whether gmake supports nested variables... (cached) yes checking directory of build tree... /wrkdirs/usr/ports/net/openmpi/work/openmpi-5.0.1 checking directory of source tree... . checking directory of prefix... /usr/local/mpi/openmpi *** Checking versions checking for repo version... v5.0.1 checking Open MPI version... 5.0.1 checking Open MPI release date... Dec 20, 2023 checking Open MPI repository version... v5.0.1 checking MPI Standard version... 3.1 checking for repo version... v5.0.1 checking Open SHMEM version... 5.0.1 checking Open SHMEM release date... Dec 20, 2023 checking Open SHMEM repository version... v5.0.1 checking for repo version... v5.0.1 checking Open Portable Access Layer version... 5.0.1 checking Open Portable Access Layer release date... Dec 20, 2023 checking Open Portable Access Layer repository version... v5.0.1 checking for bootstrap Autoconf version... 2.71 checking for bootstrap Automake version... 1.16 checking for bootstrap Libtool version... 2.4.6 *** Initialization, setup configure: builddir: /wrkdirs/usr/ports/net/openmpi/work/openmpi-5.0.1 configure: srcdir: /wrkdirs/usr/ports/net/openmpi/work/openmpi-5.0.1 installing to directory "/usr/local/mpi/openmpi" *** General configuration options checking if want to run code coverage... no checking if want to compile with branch probabilities... no checking if want to debug memory usage... no checking if want to profile memory usage... no checking if want developer-level compiler pickyness... no checking if want developer-level debugging code... no checking if want to developer-level timing framework... no checking if want to install project-internal header files... no checking if want pretty-print stacktrace... yes checking if want pty support... yes checking if want weak symbol support... yes checking if want dlopen support... yes checking for default value of mca_base_component_show_load_errors... enabled for all checking if want heterogeneous support... no checking if want IPv6 support... yes checking if want package/brand string... Open MPI root@150aarch64-dimaports Distribution checking if want ident string... 5.0.1 checking if want to use an alternative checksum algo for messages... no checking maximum length of processor name... 256 checking maximum length of error string... 256 checking maximum length of object name... 64 checking maximum length of info key... 36 checking maximum length of info val... 256 checking maximum length of port name... 1024 checking maximum length of datarep string... 128 checking maximum length of pset name len... 512 checking maximum length of stringtag len... 1024 checking if want getpwuid support... yes *** MPI layer configuration options checking if want compile-time warnings inside of mpi.h... yes checking if want sparse process groups... no checking if want peruse support... no checking if want Fortran MPI bindings... all (usempif08) checking if want run-time MPI parameter checking... runtime checking if want OMPIO support... yes checking if want software-based performance counters (SPC)... no checking if want custom libmpi(_FOO) name... mpi *** OpenSHMEM Configuration options checking if want OpenSHMEM... not supported on this platform checking if want SGI/Quadrics compatibility mode... yes checking if want OpenSHMEM API parameter checking... always checking if want pshmem... yes checking if want to build OpenSHMEM fortran bindings... yes ============================================================================ == Compiler and preprocessor tests ============================================================================ *** C compiler and preprocessor checking whether gmake supports the include directive... yes (GNU style) checking for gcc... cc checking whether the C compiler works... yes checking for C compiler default output file name... a.out checking for suffix of executables... checking whether we are cross compiling... no checking for suffix of object files... o checking whether the compiler supports GNU C... yes checking whether cc accepts -g... yes checking for cc option to enable C11 features... none needed checking whether cc understands -c and -o together... yes checking dependency style of cc... gcc3 checking for stdio.h... (cached) yes checking for stdlib.h... (cached) yes checking for string.h... (cached) yes checking for inttypes.h... (cached) yes checking for stdint.h... (cached) yes checking for strings.h... (cached) yes checking for sys/stat.h... (cached) yes checking for sys/types.h... (cached) yes checking for unistd.h... (cached) yes checking for wchar.h... (cached) yes checking for minix/config.h... (cached) no checking whether it is safe to define __EXTENSIONS__... yes checking whether _XOPEN_SOURCE should be defined... no checking for gcc... (cached) cc checking whether the compiler supports GNU C... (cached) yes checking whether cc accepts -g... (cached) yes checking for cc option to enable C11 features... (cached) none needed checking whether cc understands -c and -o together... (cached) yes checking dependency style of cc... (cached) gcc3 checking for grep that handles long lines and -e... (cached) /usr/bin/grep checking if cc requires a flag for C11... no configure: verifying cc supports C11 without a flag checking if cc supports C11 _Thread_local... yes checking if cc supports C11 atomic variables... yes checking if cc supports C11 _Atomic keyword... yes checking if cc supports C11 _Generic keyword... yes checking if cc supports C11 _Static_assert... yes checking if cc supports C11 atomic_fetch_xor_explicit... yes configure: no flag required for C11 support checking for cc option to add a directory only to the search path for the quote form of include... -iquote checking for the C compiler vendor... gnu checking if cc supports __thread... yes checking if cc supports C11 _Thread_local... yes checking if cc supports (-finline-functions)... yes checking if cc supports __builtin_expect... yes checking if cc supports __builtin_prefetch... yes checking if cc supports __builtin_clz... yes checking for C optimization flags... -DNDEBUG -O2 -pipe -I/usr/local/include/gcc13 -fstack-protector-strong -isystem /usr/local/include -fno-strict-aliasing -finline-functions CFLAGS result: -DNDEBUG -O2 -pipe -I/usr/local/include/gcc13 -fstack-protector-strong -isystem /usr/local/include -fno-strict-aliasing -finline-functions checking for Interix environment... no checking for int8_t... yes checking for uint8_t... yes checking for int16_t... (cached) yes checking for uint16_t... yes checking for int32_t... (cached) yes checking for uint32_t... yes checking for int64_t... yes checking for uint64_t... yes checking for int128_t... no checking for __int128... yes checking for uint128_t... no checking for long long... (cached) yes checking for __float128... no checking for short float... no checking for long double... (cached) yes checking for complex.h... yes checking for short float _Complex... no checking for float _Complex... yes checking for double _Complex... yes checking for long double _Complex... yes checking for intptr_t... yes checking for uintptr_t... (cached) yes checking for mode_t... (cached) yes checking for ssize_t... (cached) yes checking for ptrdiff_t... (cached) yes checking size of _Bool... 1 checking size of char... 1 checking size of short... 2 checking size of int... 4 checking size of unsigned int... 4 checking size of long... 8 checking size of unsigned long... 8 checking size of long long... 8 checking size of float... 4 checking size of double... 8 checking size of long double... 16 checking size of float _Complex... 8 checking size of double _Complex... 16 checking size of long double _Complex... 32 checking size of void *... 8 checking size of size_t... 8 checking size of ssize_t... 8 checking size of ptrdiff_t... 8 checking size of wchar_t... 4 checking size of pid_t... 4 checking size of atomic_short... 2 checking size of atomic_int... 4 checking size of atomic_long... 8 checking size of atomic_llong... 8 checking alignment of bool... 1 checking alignment of int8_t... 1 checking alignment of int16_t... 2 checking alignment of int32_t... 4 checking alignment of int64_t... 8 checking alignment of char... 1 checking alignment of short... 2 checking alignment of wchar_t... 4 checking alignment of int... 4 checking alignment of long... 8 checking alignment of long long... 8 checking alignment of float... 4 checking alignment of double... 8 checking alignment of long double... 16 checking alignment of float _Complex... 4 checking alignment of double _Complex... 8 checking alignment of long double _Complex... 16 checking alignment of void *... 8 checking alignment of size_t... 8 checking for _Float16... yes checking if want alternate C type of short float... yes (_Float16) checking for _Float16... (cached) yes checking if compiler supports arithmetic operations on _Float16... yes checking for opal_short_float_t... yes checking for opal_short_float_complex_t... yes checking size of opal_short_float_t... 2 checking size of opal_short_float_complex_t... 4 checking alignment of opal_short_float_t... 2 checking if _Float16 needs __extension__ keyword... no checking if word-sized integers must be word-size aligned... no checking for weak symbol support... yes checking for macro weak symbol support... yes checking for functional offsetof macro... yes *** C++ compiler and preprocessor checking whether the compiler supports GNU C++... yes checking whether c++ accepts -g... yes checking for c++ option to enable C++11 features... none needed checking dependency style of c++... gcc3 checking how to run the C++ preprocessor... c++ -E checking if C and C++ are link compatible... yes *** Compiler characteristics checking for __attribute__... yes checking for __attribute__(aligned)... yes checking for __attribute__(always_inline)... yes checking for __attribute__(cold)... yes checking for __attribute__(const)... yes checking for __attribute__(deprecated)... yes checking for __attribute__(deprecated_argument)... yes checking for __attribute__(error)... yes checking for __attribute__(format)... yes checking for __attribute__(format_funcptr)... no checking for __attribute__(hot)... yes checking for __attribute__(malloc)... yes checking for __attribute__(may_alias)... yes checking for __attribute__(no_instrument_function)... yes checking for __attribute__(noinline)... yes checking for __attribute__(nonnull)... yes checking for __attribute__(noreturn)... yes checking for __attribute__(noreturn_funcptr)... yes checking for __attribute__(packed)... yes checking for __attribute__(pure)... yes checking for __attribute__(sentinel)... yes checking for __attribute__(unused)... yes checking for __attribute__(visibility)... yes checking for __attribute__(warn_unused_result)... yes checking for __attribute__(weak_alias)... yes checking for __attribute__(constructor)... yes checking for __attribute__(destructor)... yes checking for __attribute__(optnone)... yes checking for __attribute__(extension)... yes checking for compiler familyid... 19 checking for compiler version... 1114118 *** Java MPI bindings checking if want Java bindings... no *** OpenSHMEM profiling checking if pshmem will be enabled... no (OpenSHMEM disabled) *** Assembler checking dependency style of cc... gcc3 checking if cc supports GCC inline assembly... yes checking for 32-bit GCC built-in atomics... yes checking for 64-bit GCC built-in atomics... yes checking if 64-bit GCC built-in atomics are lock-free... yes checking for __atomic_compare_exchange_n... yes checking if __atomic_compare_exchange_n() gives correct results... yes checking if __int128 atomic compare-and-swap is always lock-free... yes configure: Using GCC built-in style atomics *** Fortran compiler checking whether the compiler supports GNU Fortran... yes checking whether gfortran13 accepts -g... yes checking for BSD- or MS-compatible name lister (nm)... /usr/local/bin/nm checking the name lister (/usr/local/bin/nm) interface... BSD nm configure: WARNING: Open MPI now ignores the F77 and FFLAGS environment variables; only the FC and FCFLAGS environment variables are used. checking whether ln -s works... yes checking if Fortran compiler works... yes checking for extra arguments to build a shared library... none needed checking for gfortran13 warnings flags... none checking for Fortran flag to compile .f files... none checking for Fortran flag to compile .f90 files... none checking if Fortran compilers preprocess .F90 files without additional flag... yes checking to see if Fortran compilers need additional linker flags... none checking external symbol convention... single underscore checking if C and Fortran are link compatible... yes checking to see if Fortran compiler likes the C++ exception flags... skipped (no C++ exceptions flags) checking to see if mpifort compiler needs additional linker flags... none checking if Fortran compiler supports CHARACTER... yes checking size of Fortran CHARACTER... 1 checking for C type corresponding to CHARACTER... char checking alignment of Fortran CHARACTER... 1 checking for corresponding KIND value of CHARACTER... C_SIGNED_CHAR checking KIND value of Fortran C_SIGNED_CHAR... 1 checking if Fortran compiler supports LOGICAL... yes checking size of Fortran LOGICAL... 4 checking for C type corresponding to LOGICAL... int checking alignment of Fortran LOGICAL... 4 checking for corresponding KIND value of LOGICAL... C_INT checking KIND value of Fortran C_INT... 4 checking if Fortran compiler supports LOGICAL*1... yes checking size of Fortran LOGICAL*1... 1 checking for C type corresponding to LOGICAL*1... char checking alignment of Fortran LOGICAL*1... 1 checking for corresponding KIND value of LOGICAL*1... C_SIGNED_CHAR checking KIND value of Fortran C_SIGNED_CHAR... (cached) 1 checking if Fortran compiler supports LOGICAL*2... yes checking size of Fortran LOGICAL*2... 2 checking for C type corresponding to LOGICAL*2... short checking alignment of Fortran LOGICAL*2... 2 checking for corresponding KIND value of LOGICAL*2... C_SHORT checking KIND value of Fortran C_SHORT... 2 checking if Fortran compiler supports LOGICAL*4... yes checking size of Fortran LOGICAL*4... 4 checking for C type corresponding to LOGICAL*4... int checking alignment of Fortran LOGICAL*4... 4 checking for corresponding KIND value of LOGICAL*4... C_INT checking KIND value of Fortran C_INT... (cached) 4 checking if Fortran compiler supports LOGICAL*8... yes checking size of Fortran LOGICAL*8... 8 checking for C type corresponding to LOGICAL*8... long long checking alignment of Fortran LOGICAL*8... 8 checking for corresponding KIND value of LOGICAL*8... C_LONG_LONG checking KIND value of Fortran C_LONG_LONG... 8 checking if Fortran compiler supports INTEGER... yes checking size of Fortran INTEGER... 4 checking for C type corresponding to INTEGER... int checking alignment of Fortran INTEGER... 4 checking for corresponding KIND value of INTEGER... C_INT checking KIND value of Fortran C_INT... (cached) 4 checking if Fortran compiler supports INTEGER*1... yes checking size of Fortran INTEGER*1... 1 checking for C type corresponding to INTEGER*1... char checking alignment of Fortran INTEGER*1... 1 checking for corresponding KIND value of INTEGER*1... C_SIGNED_CHAR checking KIND value of Fortran C_SIGNED_CHAR... (cached) 1 checking if Fortran compiler supports INTEGER*2... yes checking size of Fortran INTEGER*2... 2 checking for C type corresponding to INTEGER*2... short checking alignment of Fortran INTEGER*2... 2 checking for corresponding KIND value of INTEGER*2... C_SHORT checking KIND value of Fortran C_SHORT... (cached) 2 checking if Fortran compiler supports INTEGER*4... yes checking size of Fortran INTEGER*4... 4 checking for C type corresponding to INTEGER*4... int checking alignment of Fortran INTEGER*4... 4 checking for corresponding KIND value of INTEGER*4... C_INT checking KIND value of Fortran C_INT... (cached) 4 checking if Fortran compiler supports INTEGER*8... yes checking size of Fortran INTEGER*8... 8 checking for C type corresponding to INTEGER*8... long long checking alignment of Fortran INTEGER*8... 8 checking for corresponding KIND value of INTEGER*8... C_LONG_LONG checking KIND value of Fortran C_LONG_LONG... (cached) 8 checking if Fortran compiler supports INTEGER*16... yes checking size of Fortran INTEGER*16... 16 checking for C type corresponding to INTEGER*16... not found configure: WARNING: *** Did not find corresponding C type checking for corresponding KIND value of INTEGER*16... 0 checking KIND value of Fortran 0... 0 configure: WARNING: Compiler INTEGER*16 and mismatch; MPI datatype unsupported checking if Fortran compiler supports REAL... yes checking size of Fortran REAL... 4 checking for C type corresponding to REAL... float checking alignment of Fortran REAL... 4 checking for corresponding KIND value of REAL... C_FLOAT checking KIND value of Fortran C_FLOAT... 4 checking if Fortran compiler supports REAL*2... no checking if Fortran compiler supports REAL*4... yes checking size of Fortran REAL*4... 4 checking for C type corresponding to REAL*4... float checking alignment of Fortran REAL*4... 4 checking for corresponding KIND value of REAL*4... C_FLOAT checking KIND value of Fortran C_FLOAT... (cached) 4 checking if Fortran compiler supports REAL*8... yes checking size of Fortran REAL*8... 8 checking for C type corresponding to REAL*8... double checking alignment of Fortran REAL*8... 8 checking for corresponding KIND value of REAL*8... C_DOUBLE checking KIND value of Fortran C_DOUBLE... 8 checking if Fortran compiler supports REAL*16... yes checking size of Fortran REAL*16... 16 checking for C type corresponding to REAL*16... long double checking alignment of Fortran REAL*16... 16 checking for corresponding KIND value of REAL*16... C_LONG_DOUBLE checking KIND value of Fortran C_LONG_DOUBLE... 16 checking for C type matching bit representation of REAL*16... pending checking if long double == REAL*16... yes checking if Fortran compiler supports DOUBLE PRECISION... yes checking size of Fortran DOUBLE PRECISION... 8 checking for C type corresponding to DOUBLE PRECISION... double checking alignment of Fortran DOUBLE PRECISION... 8 checking for corresponding KIND value of DOUBLE PRECISION... C_DOUBLE checking KIND value of Fortran C_DOUBLE... (cached) 8 checking if Fortran compiler supports COMPLEX... yes checking size of Fortran COMPLEX... 8 checking for C type corresponding to COMPLEX... float _Complex checking alignment of Fortran COMPLEX... 4 checking for corresponding KIND value of COMPLEX... C_FLOAT_COMPLEX checking KIND value of Fortran C_FLOAT_COMPLEX... 4 checking if Fortran compiler supports COMPLEX*4... no checking if Fortran compiler supports COMPLEX*8... yes checking size of Fortran COMPLEX*8... 8 checking for C type corresponding to COMPLEX*8... float _Complex checking alignment of Fortran COMPLEX*8... 4 checking for corresponding KIND value of COMPLEX*8... C_FLOAT_COMPLEX checking KIND value of Fortran C_FLOAT_COMPLEX... (cached) 4 checking if Fortran compiler supports COMPLEX*16... yes checking size of Fortran COMPLEX*16... 16 checking for C type corresponding to COMPLEX*16... double _Complex checking alignment of Fortran COMPLEX*16... 8 checking for corresponding KIND value of COMPLEX*16... C_DOUBLE_COMPLEX checking KIND value of Fortran C_DOUBLE_COMPLEX... 8 checking if Fortran compiler supports COMPLEX*32... yes checking size of Fortran COMPLEX*32... 32 checking for C type corresponding to COMPLEX*32... long double _Complex checking alignment of Fortran COMPLEX*32... 16 checking for corresponding KIND value of COMPLEX*32... C_LONG_DOUBLE_COMPLEX checking KIND value of Fortran C_LONG_DOUBLE_COMPLEX... 16 checking if Fortran compiler supports DOUBLE COMPLEX... yes checking size of Fortran DOUBLE COMPLEX... 16 checking for C type corresponding to DOUBLE COMPLEX... double _Complex checking alignment of Fortran DOUBLE COMPLEX... 8 checking for corresponding KIND value of DOUBLE COMPLEX... C_DOUBLE_COMPLEX checking KIND value of Fortran C_DOUBLE_COMPLEX... (cached) 8 checking for max Fortran MPI handle index... 2147483647 checking Fortran value for .TRUE. logical type... 1 checking for correct handling of Fortran logical arrays... yes checking max supported Fortran array rank... 15 configure: C MPI_Status is 24 bytes long checking for the value of MPI_STATUS_SIZE... 6 Fortran INTEGERs checking KIND value of Fortran C_INT16_T... 2 checking KIND value of Fortran C_INT32_T... 4 checking KIND value of Fortran C_INT64_T... 8 checking if Fortran compiler supports the deprecated attribute... Yes checking if building Fortran mpif.h bindings... yes checking if Fortran compiler supports INTERFACE... yes checking if Fortran compiler supports ISO_FORTRAN_ENV... yes checking if Fortran compiler supports ISO_FORTRAN_ENV:REAL16... no checking if Fortran compiler supports STORAGE_SIZE for relevant types... yes checking for Fortran compiler module include flag... -I checking Fortran compiler ignore TKR syntax... not cached; checking variants checking for Fortran compiler support of TYPE(*), DIMENSION(*)... no checking for Fortran compiler support of !GCC$ ATTRIBUTES NO_ARG_CHECK... yes checking Fortran compiler ignore TKR syntax... 1:type(*), dimension(*):!GCC$ ATTRIBUTES NO_ARG_CHECK :: checking if Fortran compiler supports ISO_C_BINDING... yes checking if building Fortran 'use mpi' bindings... yes checking if Fortran compiler supports TYPE, BIND(C)... yes checking if Fortran compiler supports SUBROUTINE BIND(C)... yes checking if Fortran compiler supports TYPE(type), BIND(C, NAME="name")... yes checking if Fortran compiler supports PROCEDURE... yes checking if Fortran compiler supports USE...ONLY... yes checking if Fortran compiler supports optional arguments... yes checking if Fortran compiler supports C_FUNLOC/TS 29113... yes checking if Fortran compiler supports PRIVATE... yes checking if Fortran compiler supports ABSTRACT... yes checking if Fortran compiler supports ASYNCHRONOUS... yes checking size of Fortran type(test_mpi_handle)... 4 checking alignment of Fortran type(test_mpi_handle)... 8 checking Fortran compiler F08 assumed rank syntax... not cached; checking checking for Fortran compiler support of TYPE(*), DIMENSION(..)... yes checking Fortran compiler F08 assumed rank syntax... yes checking which mpi_f08 implementation to build... "good" compiler, no array subsections checking if Fortran compiler supports ELEMENTAL... yes checking if building Fortran 'use mpi_f08' bindings... yes *** Wrapper compiler setup checking for wrapper C compiler... -p: not found cc checking if want wrapper compiler rpath support... yes checking if want wrapper compiler runpath support... yes ============================================================================ == Header file tests ============================================================================ checking for alloca.h... (cached) no checking for aio.h... yes checking for arpa/inet.h... (cached) yes checking for dirent.h... (cached) yes checking for dlfcn.h... (cached) yes checking for endian.h... yes checking for execinfo.h... yes checking for err.h... (cached) yes checking for fcntl.h... (cached) yes checking for grp.h... yes checking for libgen.h... (cached) yes checking for libutil.h... (cached) yes checking for memory.h... (cached) yes checking for netdb.h... (cached) yes checking for netinet/in.h... (cached) yes checking for netinet/tcp.h... yes checking for poll.h... (cached) yes checking for pthread.h... (cached) yes checking for pty.h... no checking for pwd.h... (cached) yes checking for sched.h... (cached) yes checking for strings.h... (cached) yes checking for stropts.h... no checking for linux/ethtool.h... no checking for linux/sockios.h... no checking for sys/fcntl.h... (cached) yes checking for sys/ipc.h... yes checking for sys/shm.h... yes checking for sys/ioctl.h... (cached) yes checking for sys/mman.h... (cached) yes checking for sys/param.h... (cached) yes checking for sys/queue.h... yes checking for sys/resource.h... (cached) yes checking for sys/select.h... (cached) yes checking for sys/socket.h... (cached) yes checking for sys/sockio.h... yes checking for sys/stat.h... (cached) yes checking for sys/statfs.h... no checking for sys/statvfs.h... (cached) yes checking for time.h... (cached) yes checking for sys/time.h... (cached) yes checking for sys/tree.h... yes checking for sys/types.h... (cached) yes checking for sys/uio.h... (cached) yes checking for sys/un.h... (cached) yes checking for net/uio.h... no checking for sys/utsname.h... yes checking for sys/vfs.h... no checking for sys/wait.h... (cached) yes checking for syslog.h... yes checking for termios.h... yes checking for ulimit.h... yes checking for unistd.h... (cached) yes checking for util.h... no checking for utmp.h... (cached) no checking for malloc.h... yes checking for ifaddrs.h... yes checking for crt_externs.h... no checking for regex.h... yes checking for mntent.h... no checking for paths.h... (cached) yes checking for ioLib.h... no checking for sockLib.h... no checking for hostLib.h... no checking for shlwapi.h... no checking for sys/synch.h... no checking for db.h... yes checking for ndbm.h... yes checking for ieee754.h... no checking for sys/mount.h... (cached) yes checking for sys/sysctl.h... (cached) yes checking for net/if.h... (cached) yes ============================================================================ == Type tests ============================================================================ checking for socklen_t... (cached) yes checking for struct sockaddr_in... yes checking for struct sockaddr_in6... yes checking for struct sockaddr_storage... yes checking for struct ifreq... yes checking for struct ethtool_cmd... no checking for cc options needed to detect all undeclared functions... -fno-builtin checking whether ethtool_cmd_speed is declared... no checking whether SIOCETHTOOL is declared... no checking for struct ethtool_cmd.speed_hi... no checking for struct ethtool_cmd.speed_hi... (cached) no checking for struct ethtool_cmd.speed_hi... (cached) no checking for struct ethtool_cmd.speed_hi... (cached) no checking whether AF_UNSPEC is declared... yes checking whether PF_UNSPEC is declared... yes checking whether AF_INET6 is declared... yes checking whether PF_INET6 is declared... yes checking if SA_RESTART defined in signal.h... checking how to run the C preprocessor... cpp checking for egrep... (cached) /usr/bin/egrep yes checking for struct sockaddr.sa_len... yes checking for struct dirent.d_type... yes checking for siginfo_t.si_fd... no checking for siginfo_t.si_band... yes checking for struct statfs.f_type... no checking for struct statfs.f_fstypename... yes checking for struct statvfs.f_basetype... no checking for struct statvfs.f_fstypename... no checking for struct timespec.tv_nsec... yes checking for type of MPI_Aint... ptrdiff_t (size: 8) checking for type of MPI_Count... long long (size: 8) checking for type of MPI_Offset... long long (size: 8) checking for an MPI datatype for MPI_Offset... MPI_LONG_LONG checking for MPI_INTEGER_KIND... 4 checking for MPI_ADDRESS_KIND... 8 checking for MPI_COUNT_KIND... 8 checking for MPI_OFFSET_KIND... 8 checking the linker for support for the -fini option... yes ============================================================================ == Library and Function tests ============================================================================ checking for library containing openpty... -lutil sed: 1: "s/-L/usr/local/lib$// ": bad flag in substitute command: 'l' checking for library containing gethostbyname... none required sed: 1: "s/-lutil -L/usr/local/l ...": bad flag in substitute command: 'l' checking for library containing socket... none required sed: 1: "s/-lutil -L/usr/local/l ...": bad flag in substitute command: 'l' checking for library containing sched_yield... none required sed: 1: "s/-lutil -L/usr/local/l ...": bad flag in substitute command: 'l' checking for library containing dirname... none required sed: 1: "s/-lutil -L/usr/local/l ...": bad flag in substitute command: 'l' checking for library containing ceil... -lm sed: 1: "s/-lutil -L/usr/local/l ...": bad flag in substitute command: 'l' checking for library containing clock_gettime... none required sed: 1: "s/-lm -lutil -L/usr/loc ...": bad flag in substitute command: 'l' checking for asprintf... (cached) yes checking for snprintf... (cached) yes checking for vasprintf... (cached) yes checking for vsnprintf... (cached) yes checking for openpty... yes checking for isatty... yes checking for getpwuid... yes checking for fork... (cached) yes checking for waitpid... (cached) yes checking for execve... yes checking for pipe... (cached) yes checking for ptsname... yes checking for setsid... (cached) yes checking for mmap... (cached) yes checking for tcgetpgrp... (cached) yes checking for posix_memalign... yes checking for strsignal... (cached) yes checking for sysconf... (cached) yes checking for syslog... yes checking for vsyslog... yes checking for regcmp... no checking for regexec... yes checking for regfree... yes checking for _NSGetEnviron... no checking for socketpair... (cached) yes checking for usleep... (cached) yes checking for mkfifo... yes checking for dbopen... yes checking for dbm_open... yes checking for statfs... (cached) yes checking for statvfs... (cached) yes checking for setpgid... (cached) yes checking for setenv... (cached) yes checking for __malloc_initialize_hook... no checking for __clear_cache... no checking for on_exit... no checking for htonl define... yes checking for htonl... yes checking whether va_copy is declared... yes checking whether __va_copy is declared... yes checking whether __func__ is declared... yes ============================================================================ == System-specific tests ============================================================================ checking __NetBSD__... no checking __FreeBSD__... yes checking __OpenBSD__... no checking __DragonFly__... no checking __386BSD__... no checking __bsdi__... no checking __APPLE__... no checking __linux__... no checking __sun__... no checking __sun... no checking for netdb.h... (cached) yes checking for netinet/in.h... (cached) yes checking for netinet/tcp.h... (cached) yes checking for struct sockaddr_in... (cached) yes checking for _SC_NPROCESSORS_ONLN... yes checking whether byte ordering is bigendian... no checking for broken qsort... no checking whether ln -s works... yes checking for grep that handles long lines and -e... (cached) /usr/bin/grep checking for egrep... (cached) /usr/bin/egrep checking dependency style of cc... (cached) gcc3 checking for flex... flex checking for lex output file root... lex.yy checking for lex library... none needed checking whether yytext is a pointer... yes checking if pre-built docs are available... yes checking for sphinx-build... /usr/local/bin/sphinx-build checking if Sphinx version is high enough (5.3.0 >= 4.2.0)... yes checking if build filesystem is case sensitive... yes checking if configuring for case sensitive filesystem... yes checking whether RLIMIT_NPROC is declared... (cached) yes checking whether RLIMIT_MEMLOCK is declared... yes checking whether RLIMIT_NOFILE is declared... yes checking whether RLIMIT_FSIZE is declared... yes checking whether RLIMIT_CORE is declared... yes checking whether RLIMIT_STACK is declared... yes checking whether RLIMIT_AS is declared... yes ============================================================================ == 3rd-party packages ============================================================================ checking if static link flag supplied... no checking for pkg-config... pkgconf checking for gzip... /usr/bin/gzip checking for bzip2... /usr/bin/bzip2 *** Configuring Libevent checking for libevent pkg-config name... libevent_core checking if libevent pkg-config module exists... yes checking for libevent pkg-config cflags... -I/usr/local/include checking for libevent pkg-config ldflags... -L/usr/local/lib checking for libevent pkg-config static ldflags... -L/usr/local/lib checking for libevent pkg-config libs... -levent_core checking for libevent pkg-config static libs... -levent_core checking for event2/event.h... yes checking for event_config_new... yes checking if libevent threads enabled... yes checking for libevent pthreads support... yes checking if external libevent version is 2.0.21 or greater... yes *** Configuring hwloc checking for hwloc pkg-config name... hwloc checking if hwloc pkg-config module exists... yes checking for hwloc pkg-config cflags... -I/usr/local/include -I/usr/local/include/libxml2 checking for hwloc pkg-config ldflags... -L/usr/local/lib checking for hwloc pkg-config static ldflags... -L/usr/local/lib -L/usr/local/lib -L/usr/local/lib -L/usr/local/lib -L/usr/local/lib -L/usr/local/lib checking for hwloc pkg-config libs... -lhwloc checking for hwloc pkg-config static libs... -lhwloc -lm -lpciaccess -lpthread -lpciaccess -lze_loader -lxml2 -lz -llzma -lpthread -licudata -licui18n -licuuc -lm checking for hwloc.h... yes checking for hwloc_topology_init... yes checking if external hwloc version is version 1.11.0 or greater... yes checking if external hwloc version is less than version 3.0.0... yes checking whether HWLOC_OBJ_OSDEV_COPROC is declared... yes checking for hwloc_topology_dup... yes *** Configuring PMIx configure: ===== configuring 3rd-party/openpmix ===== configure: running /bin/sh ./configure --disable-option-checking '--prefix=/usr/local/mpi/openmpi' --without-tests-examples --enable-pmix-binaries --disable-pmix-backward-compatibility --disable-visibility '--program-prefix=' '--without-ofi' '--enable-mpi-fortran=usempif08' '--enable-mca-no-build=verbs,btl_openib,oob_ud' '--with-wrapper-ldflags=-Wl,-rpath=-Wl,-rpath=/usr/local/lib/gcc13' '--disable-io-romio' '--enable-mca-no-build=op-avx' '--disable-debug' '--enable-ipv6' '--without-slurm' '--without-tm' '--localstatedir=/var' '--mandir=/usr/local/mpi/openmpi/share/man' '--disable-silent-rules' '--infodir=/usr/local/mpi/openmpi/share/info/' '--build=aarch64-portbld-freebsd15.0' 'build_alias=aarch64-portbld-freebsd15.0' 'CC=cc' 'CFLAGS=-O2 -pipe -I/usr/local/include/gcc13 -fstack-protector-strong -isystem /usr/local/include -fno-strict-aliasing ' 'LDFLAGS= -Wl,-rpath=/usr/local/lib/gcc13 -L/usr/local/lib/gcc13 -fstack-protector-strong ' 'LIBS=-L/usr/local/lib' 'CPPFLAGS=-isystem /usr/local/include' 'CXX=c++' 'CXXFLAGS=-O2 -pipe -I/usr/local/include/gcc13 -fstack-protector-strong -isystem /usr/local/include -fno-strict-aliasing -isystem /usr/local/include ' 'FC=gfortran13' 'FCFLAGS=-Wl,-rpath=/usr/local/lib/gcc13 -fallow-argument-mismatch' 'CPP=cpp' 'PKG_CONFIG=pkgconf' 'PKG_CONFIG_LIBDIR=/wrkdirs/usr/ports/net/openmpi/work/.pkgconfig:/usr/local/libdata/pkgconfig:/usr/local/share/pkgconfig:/usr/libdata/pkgconfig' --cache-file=/dev/null --srcdir=. configure: loading site script /usr/ports/Templates/config.site checking for a sed that does not truncate output... (cached) /usr/bin/sed configure: builddir: /wrkdirs/usr/ports/net/openmpi/work/openmpi-5.0.1/3rd-party/openpmix configure: srcdir: /wrkdirs/usr/ports/net/openmpi/work/openmpi-5.0.1/3rd-party/openpmix ============================================================================ == Configuring PMIx ============================================================================ checking build system type... aarch64-portbld-freebsd15.0 checking host system type... aarch64-portbld-freebsd15.0 checking target system type... aarch64-portbld-freebsd15.0 checking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane... yes checking for a race-free mkdir -p... (cached) /bin/mkdir -p checking for gawk... (cached) /usr/bin/awk checking whether gmake sets $(MAKE)... yes checking whether gmake supports nested variables... yes checking whether gmake supports nested variables... (cached) yes checking for grep that handles long lines and -e... (cached) /usr/bin/grep checking whether gmake supports the include directive... yes (GNU style) checking for gcc... cc checking whether the C compiler works... yes checking for C compiler default output file name... a.out checking for suffix of executables... checking whether we are cross compiling... no checking for suffix of object files... o checking whether the compiler supports GNU C... yes checking whether cc accepts -g... yes checking for cc option to enable C11 features... none needed checking whether cc understands -c and -o together... yes checking dependency style of cc... gcc3 checking for BSD- or MS-compatible name lister (nm)... /usr/local/bin/nm checking the name lister (/usr/local/bin/nm) interface... BSD nm checking for stdio.h... (cached) yes checking for stdlib.h... (cached) yes checking for string.h... (cached) yes checking for inttypes.h... (cached) yes checking for stdint.h... (cached) yes checking for strings.h... (cached) yes checking for sys/stat.h... (cached) yes checking for sys/types.h... (cached) yes checking for unistd.h... (cached) yes checking for wchar.h... (cached) yes checking for minix/config.h... (cached) no checking whether it is safe to define __EXTENSIONS__... yes checking whether _XOPEN_SOURCE should be defined... no checking directory of build tree... /wrkdirs/usr/ports/net/openmpi/work/openmpi-5.0.1/3rd-party/openpmix checking directory of prefix... /usr/local/mpi/openmpi checking directory of source tree... . checking if want wrapper compiler rpath support... yes checking if want wrapper compiler runpath support... yes checking the archiver (/usr/local/bin/ar) interface... ar checking for flex... flex checking for lex output file root... lex.yy checking for lex library... none needed checking whether yytext is a pointer... yes checking if want dlopen support... yes checking __NetBSD__... no checking __FreeBSD__... yes checking __OpenBSD__... no checking __DragonFly__... no checking __386BSD__... no checking __bsdi__... no checking __APPLE__... no checking __linux__... no checking __sun__... no checking __sun... no checking for netdb.h... (cached) yes checking for netinet/in.h... (cached) yes checking for netinet/tcp.h... yes checking for struct sockaddr_in... yes checking if want developer-level compiler pickyness... no checking if want memory sanitizers... no checking if want developer-level debugging code... no checking if want to install PMIx header files... yes checking if tests and examples are to be installed... no checking if want pretty-print stacktrace... yes checking if want dstore pthread-based locking... yes checking if want ident string... checking if want developer-level timing support... no checking if want to disable binaries... yes checking if want install Python bindings... no checking python... checking for python... no checking for python2... no checking for python3... no checking for python3.9... no checking for python3.8... no checking for python3.7... no checking for python3.6... no checking for python3.5... no checking for python3.4... no checking for python3.3... no checking for python3.2... no checking for python3.1... no checking for python3.0... no checking for python2.7... no checking for python2.6... no checking for python2.5... no checking for python2.4... no checking for python2.3... no checking for python2.2... no checking for python2.1... no checking for python2.0... no configure: error: no suitable Python interpreter found configure: ===== done with 3rd-party/openpmix configure ===== checking for pmix pkg-config name... pmix checking if pmix pkg-config module exists... no checking for pmix wrapper compiler... pmixcc checking if pmix wrapper compiler works... no configure: Searching for pmix in default search paths checking for pmix cppflags... checking for pmix ldflags... checking for pmix libs... -lpmix checking for pmix static libs... -lpmix checking for pmix.h... no configure: error: Could not find viable pmix build. ===> Script "configure" failed unexpectedly. Please report the problem to ports@FreeBSD.org [maintainer] and attach the "/wrkdirs/usr/ports/net/openmpi/work/openmpi-5.0.1/config.log" including the output of the failure of your make command. Also, it might be a good idea to provide an overview of all packages installed on your system (e.g. a /usr/local/sbin/pkg-static info -g -Ea). *** Error code 1 Stop. make: stopped in /usr/ports/net/openmpi build of net/openmpi | openmpi-5.0.1 ended at Sun Feb 18 17:30:47 MSK 2024 build time: 00:00:41 !!! build failure encountered !!!