Copyright (c) 1992-2005 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD 6.0-CURRENT #0: Sat Feb 12 09:00:14 EST 2005
    rwatson@zoo.freebsd.org:/zoo/rwatson/netperf/src/sys/i386/compile/PERF-SMP
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) XEON(TM) CPU 2.20GHz (2192.90-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0xf24  Stepping = 4
  Features=0x3febfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM>
real memory  = 2147352576 (2047 MB)
avail memory = 2096726016 (1999 MB)
ACPI APIC Table: <DELL   PE2650  >
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
 cpu0 (BSP): APIC ID:  0
 cpu1 (AP): APIC ID:  6
ioapic0: Changing APIC ID to 8
ioapic1: Changing APIC ID to 9
ioapic2: Changing APIC ID to 10
MADT: Forcing active-low polarity and level trigger for SCI
ioapic0 <Version 1.1> irqs 0-15 on motherboard
ioapic1 <Version 1.1> irqs 16-31 on motherboard
ioapic2 <Version 1.1> irqs 32-47 on motherboard
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <DELL PE2650> on motherboard
acpi0: Power Button (fixed)
Timecounter "ACPI-safe" frequency 3579545 Hz quality 1000
acpi_timer0: <32-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci_link0: <ACPI PCI Link LUSB> on acpi0
pci0: <ACPI PCI bus> on pcib0
pci0: <unknown> at device 4.0 (no driver attached)
pci0: <unknown> at device 4.1 (no driver attached)
cbb0: <PCI-CardBus Bridge> port 0xecf4-0xecf7 irq 27 at device 4.2 on pci0
cbb0: failed: rid 0x10 is ioport, requested 3
cbb0: Could not map register memory
device_attach: cbb0 attach returned 12
pci0: <display, VGA> at device 14.0 (no driver attached)
atapci0: <ServerWorks CSB5 UDMA100 controller> port 0x8b0-0x8bf,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 15.1 on pci0
ata0: channel #0 on atapci0
ata1: channel #1 on atapci0
isab0: <PCI-ISA bridge> at device 15.3 on pci0
isa0: <ISA bus> on isab0
pcib1: <ACPI Host-PCI bridge> on acpi0
pci4: <ACPI PCI bus> on pcib1
pcib2: <ACPI PCI-PCI bridge> at device 8.0 on pci4
pci5: <ACPI PCI bus> on pcib2
aac0: <Dell PERC 3/Di> mem 0xf0000000-0xf7ffffff irq 30 at device 8.1 on pci4
aac0: [FAST]
pcib3: <ACPI Host-PCI bridge> on acpi0
pci3: <ACPI PCI bus> on pcib3
bge0: <Broadcom BCM5701 Gigabit Ethernet, ASIC rev. 0x105> mem 0xfcd10000-0xfcd1ffff irq 28 at device 6.0 on pci3
miibus0: <MII bus> on bge0
brgphy0: <BCM5701 10/100/1000baseTX PHY> on miibus0
brgphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX, 1000baseTX-FDX, auto
bge0: Ethernet address: 00:06:5b:8e:b9:8d
bge1: <Broadcom BCM5701 Gigabit Ethernet, ASIC rev. 0x105> mem 0xfcd00000-0xfcd0ffff irq 29 at device 8.0 on pci3
miibus1: <MII bus> on bge1
brgphy1: <BCM5701 10/100/1000baseTX PHY> on miibus1
brgphy1:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX, 1000baseTX-FDX, auto
bge1: Ethernet address: 00:06:5b:8e:b9:8e
pcib4: <ACPI Host-PCI bridge> on acpi0
pci2: <ACPI PCI bus> on pcib4
pcib5: <ACPI Host-PCI bridge> on acpi0
pci1: <ACPI PCI bus> on pcib5
fxp0: <Intel 82550 Pro/100 Ethernet> port 0xdcc0-0xdcff mem 0xfcf00000-0xfcf1ffff,0xfcf20000-0xfcf20fff irq 20 at device 8.0 on pci1
miibus2: <MII bus> on fxp0
inphy0: <i82555 10/100 media interface> on miibus2
inphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fxp0: Ethernet address: 00:02:b3:b7:8b:90
pci_link1: <ACPI PCI Link LNK0> on acpi0
pci_link2: <ACPI PCI Link LNK1> on acpi0
pci_link3: <ACPI PCI Link LNK2> on acpi0
pci_link4: <ACPI PCI Link LNK3> irq 11 on acpi0
pci_link5: <ACPI PCI Link LNK4> irq 5 on acpi0
pci_link6: <ACPI PCI Link LNK5> on acpi0
pci_link7: <ACPI PCI Link LNK6> on acpi0
pci_link8: <ACPI PCI Link LNK7> irq 10 on acpi0
pci_link9: <ACPI PCI Link LNK8> on acpi0
pci_link10: <ACPI PCI Link LNK9> on acpi0
pci_link11: <ACPI PCI Link LNKA> on acpi0
pci_link12: <ACPI PCI Link LNKB> irq 7 on acpi0
pci_link13: <ACPI PCI Link LNKC> irq 11 on acpi0
pci_link14: <ACPI PCI Link LNKD> irq 10 on acpi0
pci_link15: <ACPI PCI Link LNKE> irq 7 on acpi0
pci_link16: <ACPI PCI Link LNKF> on acpi0
pci_link17: <ACPI PCI Link LN10> on acpi0
pci_link18: <ACPI PCI Link LN11> on acpi0
pci_link19: <ACPI PCI Link LN12> on acpi0
pci_link20: <ACPI PCI Link LN13> on acpi0
pci_link21: <ACPI PCI Link LN14> on acpi0
pci_link22: <ACPI PCI Link LN15> on acpi0
pci_link23: <ACPI PCI Link LN16> on acpi0
pci_link24: <ACPI PCI Link LN17> on acpi0
pci_link25: <ACPI PCI Link LN18> on acpi0
pci_link26: <ACPI PCI Link LN19> on acpi0
pci_link27: <ACPI PCI Link LN1A> on acpi0
pci_link28: <ACPI PCI Link LN1B> on acpi0
pci_link29: <ACPI PCI Link LN1C> on acpi0
pci_link30: <ACPI PCI Link LN1D> on acpi0
pci_link31: <ACPI PCI Link LN1E> on acpi0
pci_link32: <ACPI PCI Link LN1F> on acpi0
fdc0: <floppy drive controller> port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on acpi0
fdc0: [FAST]
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
sio0: type 16550A, console
sio1: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
pmtimer0 on isa0
orm0: <ISA Option ROMs> at iomem 0xec000-0xeffff,0xce800-0xcffff,0xcd000-0xce7ff,0xc9000-0xccfff,0xc8000-0xc8fff,0xc0000-0xc7fff on isa0
ppc0: parallel port not found.
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x100>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounters tick every 1.000 msec
acd0: CDROM <TEAC CD-ROM CD-224E/K.9A> at ata0-master UDMA33
aacd0: <RAID 0/1> on aac0
aacd0: 69425MB (142182912 sectors)
SMP: AP CPU #1 Launched!
Trying to mount root from ufs:/dev/aacd0s1a