MP Configuration Table version 1.4 found at 0xc00fe110 ACPI Error: A valid RSDP was not found (20110527/tbxfroot-237) APIC: Using the MPTable enumerator. SMP: Added CPU 0 (BSP) SMP: Added CPU 1 (AP) Copyright (c) 1992-2012 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 9.1-RELEASE-p4 #0: Mon Jun 17 11:38:17 UTC 2013 root@amd64-builder.daemonology.net:/usr/obj/usr/src/sys/GENERIC i386 Preloaded elf kernel "/boot/kernel/kernel" at 0xc13ec000. Preloaded elf module "/boot/kernel/geom_mirror.ko" at 0xc13ec174. Calibrating TSC clock ... TSC clock: 1600033584 Hz CPU: Genuine Intel(R) CPU @ 1.60GHz (1600.03-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x20661 Family = 6 Model = 26 Stepping = 1 Features=0xbfe9fbff Features2=0x40e3bd AMD Features=0x20100000 AMD Features2=0x1 TSC: P-state invariant, performance statistics 1st-level instruction cache: 32 KB, 8-way set associative, 64 byte line size L2 cache: 512 kbytes, 8-way associative, 64 bytes/line real memory = 2147352576 (2047 MB) Physical memory chunk(s): 0x0000000000001000 - 0x0000000000099fff, 626688 bytes (153 pages) 0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages) 0x0000000001426000 - 0x000000007db7afff, 2088062976 bytes (509781 pages) avail memory = 2086338560 (1989 MB) INTR: Adding local APIC 0 as a target MPTable: Event timer "LAPIC" quality 400 INTR: Adding local APIC 0 as a target FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs FreeBSD/SMP: 1 package(s) x 1 core(s) x 2 HTT threads cpu0 (BSP): APIC ID: 0 cpu1 (AP/HT): APIC ID: 1 bios32: Found BIOS32 Service Directory header at 0xc00fac00 bios32: Entry = 0xfac40 (c00fac40) Rev = 0 Len = 1 pcibios: PCI BIOS entry at 0xf0000+0xac61 Other BIOS signatures found: ULE: setup cpu 0 ULE: setup cpu 1 ioapic0: Assuming intbase of 0 ioapic0: Routing external 8259A's -> intpin 0 ioapic0: Routing IRQ 0 -> intpin 2 lapic: Routing ExtINT -> LINT0 lapic: Routing NMI -> LINT1 ioapic0 irqs 0-23 on motherboard cpu0 BSP: ID: 0x00000000 VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff timer: 0x000100ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400 wlan: <802.11 Link Layer> snd_unit_init() u=0x00ff8000 [512] d=0x00007c00 [32] c=0x000003ff [1024] feeder_register: snd_unit=-1 snd_maxautovchans=16 latency=5 feeder_rate_min=1 feeder_rate_max=2016000 feeder_rate_round=25 kbd0 at kbdmux0 nfslock: pseudo-device mem: Pentium Pro MTRR support enabled module_register_init: MOD_LOAD (vesa, 0xc0dc35d0, 0) error 19 io: null: random: hptrr: RocketRAID 17xx/2xxx SATA controller driver v1.2 ACPI Error: A valid RSDP was not found (20110527/tbxfroot-237) ACPI: Table initialisation failed: AE_NOT_FOUND ACPI: Try disabling either ACPI or apic support. pci_open(1): mode 1 addr port (0x0cf8) is 0x00000000 pci_open(1a): mode1res=0x80000000 (0x80000000) pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=41148086) pcibios: BIOS version 2.01 pcib0: pcibus 0 on motherboard pci0: on pcib0 pci0: domain=0, physical bus=0 found-> vendor=0x8086, dev=0x4114, revid=0x05 domain=0, bus=0, slot=0, func=0 class=06-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x0000, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x8183, revid=0x00 domain=0, bus=0, slot=1, func=0 class=06-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x0000, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x8184, revid=0x00 domain=0, bus=0, slot=23, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0107, statreg=0x0010, cachelnsz=8 (dwords) lattimer=0x00 (0 ns), mingnt=0x02 (500 ns), maxlat=0x00 (0 ns) intpin=a, irq=10 powerspec 2 supports D0 D3 current D0 pcib0: slot 23 INTA routed to irq 16 found-> vendor=0x8086, dev=0x8185, revid=0x00 domain=0, bus=0, slot=24, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0107, statreg=0x0010, cachelnsz=8 (dwords) lattimer=0x00 (0 ns), mingnt=0x02 (500 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 powerspec 2 supports D0 D3 current D0 pcib0: slot 24 INTA routed to irq 17 found-> vendor=0x8086, dev=0x8180, revid=0x00 domain=0, bus=0, slot=25, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0107, statreg=0x0010, cachelnsz=8 (dwords) lattimer=0x00 (0 ns), mingnt=0x02 (500 ns), maxlat=0x00 (0 ns) intpin=a, irq=5 powerspec 2 supports D0 D3 current D0 pcib0: slot 25 INTA routed to irq 18 found-> vendor=0x8086, dev=0x8181, revid=0x00 domain=0, bus=0, slot=26, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0107, statreg=0x0010, cachelnsz=8 (dwords) lattimer=0x00 (0 ns), mingnt=0x02 (500 ns), maxlat=0x00 (0 ns) intpin=a, irq=9 powerspec 2 supports D0 D3 current D0 pcib0: slot 26 INTA routed to irq 19 found-> vendor=0x8086, dev=0x8186, revid=0x00 domain=0, bus=0, slot=31, func=0 class=06-01-00, hdrtype=0x00, mfdev=1 cmdreg=0x0003, statreg=0x0000, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) pcib1: irq 16 at device 23.0 on pci0 pcib1: domain 0 pcib1: secondary bus 1 pcib1: subordinate bus 2 pcib1: I/O decode 0x1000-0x1fff pcib1: memory decode 0xa0000000-0xa0ffffff pcib1: no prefetched decode pci1: on pcib1 pci1: domain=0, physical bus=1 found-> vendor=0x8086, dev=0x8800, revid=0x01 domain=0, bus=1, slot=0, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0107, statreg=0x0010, cachelnsz=8 (dwords) lattimer=0x00 (0 ns), mingnt=0x02 (500 ns), maxlat=0x00 (0 ns) intpin=a, irq=10 powerspec 2 supports D0 D1 D3 current D0 pcib0: slot 23 INTA routed to irq 16 pcib1: slot 0 INTA is routed to irq 16 pcib2: irq 16 at device 0.0 on pci1 pcib1: allocated I/O port range (0x1000-0x1fff) for rid 1c of pcib2 pcib1: allocated memory range (0xa0000000-0xa0ffffff) for rid 20 of pcib2 pcib2: domain 0 pcib2: secondary bus 2 pcib2: subordinate bus 2 pcib2: I/O decode 0x1000-0x1fff pcib2: memory decode 0xa0000000-0xa0ffffff pcib2: no prefetched decode pci2: on pcib2 pci2: domain=0, physical bus=2 found-> vendor=0x8086, dev=0x8801, revid=0x01 domain=0, bus=2, slot=0, func=0 class=ff-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0106, statreg=0x0010, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) powerspec 2 supports D0 D3 current D0 MSI supports 1 message map[14]: type Memory, range 32, base 0xa0000000, size 11, enabled pcib2: allocated memory range (0xa0000000-0xa00007ff) for rid 14 of pci0:2:0:0 found-> vendor=0x8086, dev=0x8802, revid=0x01 domain=0, bus=2, slot=0, func=1 class=02-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0107, statreg=0x0010, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=10 powerspec 2 supports D0 D3 current D0 MSI supports 1 message map[10]: type I/O Port, range 32, base 0x1000, size 5, enabled pcib2: allocated I/O port range (0x1000-0x101f) for rid 10 of pci0:2:0:1 map[14]: type Memory, range 32, base 0xa0000800, size 9, enabled pcib2: allocated memory range (0xa0000800-0xa00009ff) for rid 14 of pci0:2:0:1 pcib0: slot 23 INTA routed to irq 16 pcib1: slot 0 INTA is routed to irq 16 pcib2: slot 0 INTA is routed to irq 16 found-> vendor=0x8086, dev=0x8803, revid=0x00 domain=0, bus=2, slot=0, func=2 class=ff-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0106, statreg=0x0010, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=10 powerspec 2 supports D0 D3 current D0 MSI supports 1 message map[14]: type Memory, range 32, base 0xa0000a00, size 6, enabled pcib2: allocated memory range (0xa0000a00-0xa0000a3f) for rid 14 of pci0:2:0:2 pcib0: slot 23 INTA routed to irq 16 pcib1: slot 0 INTA is routed to irq 16 pcib2: slot 0 INTA is routed to irq 16 found-> vendor=0x8086, dev=0x8804, revid=0x01 domain=0, bus=2, slot=2, func=0 class=0c-03-10, hdrtype=0x00, mfdev=1 cmdreg=0x0106, statreg=0x0010, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=9 powerspec 2 supports D0 D3 current D0 MSI supports 1 message map[10]: type Memory, range 32, base 0xa0000b00, size 8, enabled pcib2: allocated memory range (0xa0000b00-0xa0000bff) for rid 10 of pci0:2:2:0 pcib0: slot 23 INTD routed to irq 19 pcib1: slot 0 INTD is routed to irq 19 pcib2: slot 2 INTB is routed to irq 19 found-> vendor=0x8086, dev=0x8805, revid=0x01 domain=0, bus=2, slot=2, func=1 class=0c-03-10, hdrtype=0x00, mfdev=1 cmdreg=0x0106, statreg=0x0010, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=9 powerspec 2 supports D0 D3 current D0 MSI supports 1 message map[10]: type Memory, range 32, base 0xa0000c00, size 8, enabled pcib2: allocated memory range (0xa0000c00-0xa0000cff) for rid 10 of pci0:2:2:1 pcib0: slot 23 INTD routed to irq 19 pcib1: slot 0 INTD is routed to irq 19 pcib2: slot 2 INTB is routed to irq 19 found-> vendor=0x8086, dev=0x8806, revid=0x01 domain=0, bus=2, slot=2, func=2 class=0c-03-10, hdrtype=0x00, mfdev=1 cmdreg=0x0106, statreg=0x0010, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=9 powerspec 2 supports D0 D3 current D0 MSI supports 1 message map[10]: type Memory, range 32, base 0xa0000d00, size 8, enabled pcib2: allocated memory range (0xa0000d00-0xa0000dff) for rid 10 of pci0:2:2:2 pcib0: slot 23 INTD routed to irq 19 pcib1: slot 0 INTD is routed to irq 19 pcib2: slot 2 INTB is routed to irq 19 found-> vendor=0x8086, dev=0x8807, revid=0x01 domain=0, bus=2, slot=2, func=3 class=0c-03-20, hdrtype=0x00, mfdev=1 cmdreg=0x0106, statreg=0x0010, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=9 powerspec 2 supports D0 D3 current D0 MSI supports 1 message map[10]: type Memory, range 32, base 0xa0000e00, size 8, enabled pcib2: allocated memory range (0xa0000e00-0xa0000eff) for rid 10 of pci0:2:2:3 pcib0: slot 23 INTD routed to irq 19 pcib1: slot 0 INTD is routed to irq 19 pcib2: slot 2 INTB is routed to irq 19 found-> vendor=0x8086, dev=0x8808, revid=0x01 domain=0, bus=2, slot=2, func=4 class=0c-03-fe, hdrtype=0x00, mfdev=1 cmdreg=0x0106, statreg=0x0010, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=9 powerspec 2 supports D0 D3 current D0 MSI supports 1 message map[14]: type Memory, range 32, base 0xa0002000, size 13, enabled pcib2: allocated memory range (0xa0002000-0xa0003fff) for rid 14 of pci0:2:2:4 pcib0: slot 23 INTD routed to irq 19 pcib1: slot 0 INTD is routed to irq 19 pcib2: slot 2 INTB is routed to irq 19 found-> vendor=0x8086, dev=0x8809, revid=0x01 domain=0, bus=2, slot=4, func=0 class=08-05-01, hdrtype=0x00, mfdev=1 cmdreg=0x0106, statreg=0x0010, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=c, irq=5 powerspec 2 supports D0 D3 current D0 MSI supports 1 message map[10]: type Memory, range 32, base 0xa0004000, size 9, enabled pcib2: allocated memory range (0xa0004000-0xa00041ff) for rid 10 of pci0:2:4:0 pcib0: slot 23 INTC routed to irq 18 pcib1: slot 0 INTC is routed to irq 18 pcib2: slot 4 INTC is routed to irq 18 found-> vendor=0x8086, dev=0x880a, revid=0x01 domain=0, bus=2, slot=4, func=1 class=08-05-01, hdrtype=0x00, mfdev=1 cmdreg=0x0106, statreg=0x0010, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=c, irq=5 powerspec 2 supports D0 D3 current D0 MSI supports 1 message map[10]: type Memory, range 32, base 0xa0004200, size 9, enabled pcib2: allocated memory range (0xa0004200-0xa00043ff) for rid 10 of pci0:2:4:1 pcib0: slot 23 INTC routed to irq 18 pcib1: slot 0 INTC is routed to irq 18 pcib2: slot 4 INTC is routed to irq 18 found-> vendor=0x8086, dev=0x880b, revid=0x01 domain=0, bus=2, slot=6, func=0 class=01-06-01, hdrtype=0x00, mfdev=0 cmdreg=0x0107, statreg=0x0010, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=d, irq=11 powerspec 2 supports D0 D3 current D0 MSI supports 1 message map[20]: type I/O Port, range 32, base 0x1020, size 5, enabled pcib2: allocated I/O port range (0x1020-0x103f) for rid 20 of pci0:2:6:0 map[24]: type Memory, range 32, base 0xa0004400, size 10, enabled pcib2: allocated memory range (0xa0004400-0xa00047ff) for rid 24 of pci0:2:6:0 pcib0: slot 23 INTB routed to irq 17 pcib1: slot 0 INTB is routed to irq 17 pcib2: slot 6 INTD is routed to irq 17 found-> vendor=0x8086, dev=0x880c, revid=0x01 domain=0, bus=2, slot=8, func=0 class=0c-03-10, hdrtype=0x00, mfdev=1 cmdreg=0x0106, statreg=0x0010, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=10 powerspec 2 supports D0 D3 current D0 MSI supports 1 message map[10]: type Memory, range 32, base 0xa0004800, size 8, enabled pcib2: allocated memory range (0xa0004800-0xa00048ff) for rid 10 of pci0:2:8:0 pcib0: slot 23 INTA routed to irq 16 pcib1: slot 0 INTA is routed to irq 16 pcib2: slot 8 INTA is routed to irq 16 found-> vendor=0x8086, dev=0x880d, revid=0x01 domain=0, bus=2, slot=8, func=1 class=0c-03-10, hdrtype=0x00, mfdev=1 cmdreg=0x0106, statreg=0x0010, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=10 powerspec 2 supports D0 D3 current D0 MSI supports 1 message map[10]: type Memory, range 32, base 0xa0004900, size 8, enabled pcib2: allocated memory range (0xa0004900-0xa00049ff) for rid 10 of pci0:2:8:1 pcib0: slot 23 INTA routed to irq 16 pcib1: slot 0 INTA is routed to irq 16 pcib2: slot 8 INTA is routed to irq 16 found-> vendor=0x8086, dev=0x880e, revid=0x01 domain=0, bus=2, slot=8, func=2 class=0c-03-10, hdrtype=0x00, mfdev=1 cmdreg=0x0106, statreg=0x0010, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=10 powerspec 2 supports D0 D3 current D0 MSI supports 1 message map[10]: type Memory, range 32, base 0xa0004a00, size 8, enabled pcib2: allocated memory range (0xa0004a00-0xa0004aff) for rid 10 of pci0:2:8:2 pcib0: slot 23 INTA routed to irq 16 pcib1: slot 0 INTA is routed to irq 16 pcib2: slot 8 INTA is routed to irq 16 found-> vendor=0x8086, dev=0x880f, revid=0x01 domain=0, bus=2, slot=8, func=3 class=0c-03-20, hdrtype=0x00, mfdev=1 cmdreg=0x0106, statreg=0x0010, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=10 powerspec 2 supports D0 D3 current D0 MSI supports 1 message map[10]: type Memory, range 32, base 0xa0004b00, size 8, enabled pcib2: allocated memory range (0xa0004b00-0xa0004bff) for rid 10 of pci0:2:8:3 pcib0: slot 23 INTA routed to irq 16 pcib1: slot 0 INTA is routed to irq 16 pcib2: slot 8 INTA is routed to irq 16 found-> vendor=0x8086, dev=0x8810, revid=0x00 domain=0, bus=2, slot=10, func=0 class=ff-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0106, statreg=0x0010, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=9 powerspec 2 supports D0 D3 current D0 MSI supports 1 message map[14]: type Memory, range 32, base 0xa0004c00, size 8, enabled pcib2: allocated memory range (0xa0004c00-0xa0004cff) for rid 14 of pci0:2:10:0 pcib0: slot 23 INTD routed to irq 19 pcib1: slot 0 INTD is routed to irq 19 pcib2: slot 10 INTB is routed to irq 19 found-> vendor=0x8086, dev=0x8811, revid=0x00 domain=0, bus=2, slot=10, func=1 class=07-00-02, hdrtype=0x00, mfdev=1 cmdreg=0x0107, statreg=0x0010, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=9 powerspec 2 supports D0 D3 current D0 MSI supports 1 message map[10]: type I/O Port, range 32, base 0x1040, size 3, enabled pcib2: allocated I/O port range (0x1040-0x1047) for rid 10 of pci0:2:10:1 map[14]: type Memory, range 32, base 0xa0004d00, size 4, enabled pcib2: allocated memory range (0xa0004d00-0xa0004d0f) for rid 14 of pci0:2:10:1 pcib0: slot 23 INTD routed to irq 19 pcib1: slot 0 INTD is routed to irq 19 pcib2: slot 10 INTB is routed to irq 19 found-> vendor=0x8086, dev=0x8812, revid=0x00 domain=0, bus=2, slot=10, func=2 class=07-00-02, hdrtype=0x00, mfdev=1 cmdreg=0x0107, statreg=0x0010, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=9 powerspec 2 supports D0 D3 current D0 MSI supports 1 message map[10]: type I/O Port, range 32, base 0x1048, size 3, enabled pcib2: allocated I/O port range (0x1048-0x104f) for rid 10 of pci0:2:10:2 map[14]: type Memory, range 32, base 0xa0004d10, size 4, enabled pcib2: allocated memory range (0xa0004d10-0xa0004d1f) for rid 14 of pci0:2:10:2 pcib0: slot 23 INTD routed to irq 19 pcib1: slot 0 INTD is routed to irq 19 pcib2: slot 10 INTB is routed to irq 19 found-> vendor=0x8086, dev=0x8813, revid=0x00 domain=0, bus=2, slot=10, func=3 class=07-00-02, hdrtype=0x00, mfdev=1 cmdreg=0x0107, statreg=0x0010, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=9 powerspec 2 supports D0 D3 current D0 MSI supports 1 message map[10]: type I/O Port, range 32, base 0x1050, size 3, enabled pcib2: allocated I/O port range (0x1050-0x1057) for rid 10 of pci0:2:10:3 map[14]: type Memory, range 32, base 0xa0004d20, size 4, enabled pcib2: allocated memory range (0xa0004d20-0xa0004d2f) for rid 14 of pci0:2:10:3 pcib0: slot 23 INTD routed to irq 19 pcib1: slot 0 INTD is routed to irq 19 pcib2: slot 10 INTB is routed to irq 19 found-> vendor=0x8086, dev=0x8814, revid=0x00 domain=0, bus=2, slot=10, func=4 class=07-00-02, hdrtype=0x00, mfdev=1 cmdreg=0x0107, statreg=0x0010, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=9 powerspec 2 supports D0 D3 current D0 MSI supports 1 message map[10]: type I/O Port, range 32, base 0x1058, size 3, enabled pcib2: allocated I/O port range (0x1058-0x105f) for rid 10 of pci0:2:10:4 map[14]: type Memory, range 32, base 0xa0004d30, size 4, enabled pcib2: allocated memory range (0xa0004d30-0xa0004d3f) for rid 14 of pci0:2:10:4 pcib0: slot 23 INTD routed to irq 19 pcib1: slot 0 INTD is routed to irq 19 pcib2: slot 10 INTB is routed to irq 19 found-> vendor=0x8086, dev=0x8815, revid=0x00 domain=0, bus=2, slot=12, func=0 class=ff-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0106, statreg=0x0010, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=c, irq=5 powerspec 2 supports D0 D3 current D0 MSI supports 1 message map[14]: type Memory, range 32, base 0xa0004e00, size 8, enabled pcib2: allocated memory range (0xa0004e00-0xa0004eff) for rid 14 of pci0:2:12:0 pcib0: slot 23 INTC routed to irq 18 pcib1: slot 0 INTC is routed to irq 18 pcib2: slot 12 INTC is routed to irq 18 found-> vendor=0x8086, dev=0x8816, revid=0x00 domain=0, bus=2, slot=12, func=1 class=0c-80-00, hdrtype=0x00, mfdev=1 cmdreg=0x0106, statreg=0x0010, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=c, irq=5 powerspec 2 supports D0 D3 current D0 MSI supports 1 message map[14]: type Memory, range 32, base 0xa0004f00, size 5, enabled pcib2: allocated memory range (0xa0004f00-0xa0004f1f) for rid 14 of pci0:2:12:1 pcib0: slot 23 INTC routed to irq 18 pcib1: slot 0 INTC is routed to irq 18 pcib2: slot 12 INTC is routed to irq 18 found-> vendor=0x8086, dev=0x8817, revid=0x00 domain=0, bus=2, slot=12, func=2 class=0c-80-00, hdrtype=0x00, mfdev=1 cmdreg=0x0106, statreg=0x0010, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=c, irq=5 powerspec 2 supports D0 D3 current D0 MSI supports 1 message map[14]: type Memory, range 32, base 0xa0005000, size 8, enabled pcib2: allocated memory range (0xa0005000-0xa00050ff) for rid 14 of pci0:2:12:2 pcib0: slot 23 INTC routed to irq 18 pcib1: slot 0 INTC is routed to irq 18 pcib2: slot 12 INTC is routed to irq 18 found-> vendor=0x8086, dev=0x8818, revid=0x00 domain=0, bus=2, slot=12, func=3 class=0c-09-00, hdrtype=0x00, mfdev=1 cmdreg=0x0106, statreg=0x0010, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=c, irq=5 powerspec 2 supports D0 D3 current D0 MSI supports 1 message map[14]: type Memory, range 32, base 0xa0005200, size 9, enabled pcib2: allocated memory range (0xa0005200-0xa00053ff) for rid 14 of pci0:2:12:3 pcib0: slot 23 INTC routed to irq 18 pcib1: slot 0 INTC is routed to irq 18 pcib2: slot 12 INTC is routed to irq 18 found-> vendor=0x8086, dev=0x8819, revid=0x01 domain=0, bus=2, slot=12, func=4 class=ff-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0106, statreg=0x0010, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=c, irq=5 powerspec 2 supports D0 D3 current D0 MSI supports 1 message map[14]: type Memory, range 32, base 0xa0005400, size 8, enabled pcib2: allocated memory range (0xa0005400-0xa00054ff) for rid 14 of pci0:2:12:4 pcib0: slot 23 INTC routed to irq 18 pcib1: slot 0 INTC is routed to irq 18 pcib2: slot 12 INTC is routed to irq 18 pci2: at device 0.0 (no driver attached) pci2: at device 0.1 (no driver attached) pci2: at device 0.2 (no driver attached) ohci0: mem 0xa0000b00-0xa0000bff irq 19 at device 2.0 on pci2 ohci0: (New OHCI DeviceId=0x88048086) ioapic0: routing intpin 19 (PCI IRQ 19) to lapic 0 vector 48 usbus0 on ohci0 usbus0: bpf attached ohci0: usbpf: Attached ohci1: mem 0xa0000c00-0xa0000cff irq 19 at device 2.1 on pci2 ohci1: (New OHCI DeviceId=0x88058086) usbus1 on ohci1 usbus1: bpf attached ohci1: usbpf: Attached ohci2: mem 0xa0000d00-0xa0000dff irq 19 at device 2.2 on pci2 ohci2: (New OHCI DeviceId=0x88068086) usbus2 on ohci2 usbus2: bpf attached ohci2: usbpf: Attached ehci0: mem 0xa0000e00-0xa0000eff irq 19 at device 2.3 on pci2 usbus3: EHCI version 1.0 usbus3 on ehci0 usbus3: bpf attached ehci0: usbpf: Attached pci2: at device 2.4 (no driver attached) pci2: at device 4.0 (no driver attached) pci2: at device 4.1 (no driver attached) ahci0: port 0x1020-0x103f mem 0xa0004400-0xa00047ff irq 17 at device 6.0 on pci2 ahci0: attempting to allocate 1 MSI vectors (1 supported) msi: routing MSI IRQ 256 to local APIC 0 vector 49 ahci0: using IRQ 256 for MSI ahci0: AHCI v1.10 with 2 3Gbps ports, Port Multiplier supported ahci0: Caps: NCQ SNTF SS ALP AL CLO 3Gbps PM PMD SSC PSC 32cmd CCC 2ports ahci0: Caps2: APST ahcich0: at channel 0 on ahci0 ahcich0: Caps: ahcich1: at channel 1 on ahci0 ahcich1: Caps: ohci3: mem 0xa0004800-0xa00048ff irq 16 at device 8.0 on pci2 ohci3: (New OHCI DeviceId=0x880c8086) ioapic0: routing intpin 16 (PCI IRQ 16) to lapic 0 vector 50 usbus4 on ohci3 usbus4: bpf attached ohci3: usbpf: Attached ohci4: mem 0xa0004900-0xa00049ff irq 16 at device 8.1 on pci2 ohci4: (New OHCI DeviceId=0x880d8086) usbus5 on ohci4 usbus5: bpf attached ohci4: usbpf: Attached ohci5: mem 0xa0004a00-0xa0004aff irq 16 at device 8.2 on pci2 ohci5: (New OHCI DeviceId=0x880e8086) usbus6 on ohci5 usbus6: bpf attached ohci5: usbpf: Attached ehci1: mem 0xa0004b00-0xa0004bff irq 16 at device 8.3 on pci2 usbus7: EHCI version 1.0 usbus7 on ehci1 usbus7: bpf attached ehci1: usbpf: Attached pci2: at device 10.0 (no driver attached) uart2: <16550 or compatible> port 0x1040-0x1047 mem 0xa0004d00-0xa0004d0f irq 19 at device 10.1 on pci2 uart2: fast interrupt uart3: <16550 or compatible> port 0x1048-0x104f mem 0xa0004d10-0xa0004d1f irq 19 at device 10.2 on pci2 uart3: fast interrupt uart4: <16550 or compatible> port 0x1050-0x1057 mem 0xa0004d20-0xa0004d2f irq 19 at device 10.3 on pci2 uart4: fast interrupt uart5: <16550 or compatible> port 0x1058-0x105f mem 0xa0004d30-0xa0004d3f irq 19 at device 10.4 on pci2 uart5: fast interrupt pci2: at device 12.0 (no driver attached) pci2: at device 12.1 (no driver attached) pci2: at device 12.2 (no driver attached) pci2: at device 12.3 (no driver attached) pci2: at device 12.4 (no driver attached) pcib3: irq 17 at device 24.0 on pci0 pcib3: domain 0 pcib3: secondary bus 3 pcib3: subordinate bus 7 pcib3: I/O decode 0x2000-0x3fff pcib3: memory decode 0xa1000000-0xa2ffffff pcib3: no prefetched decode pci3: on pcib3 pci3: domain=0, physical bus=3 found-> vendor=0x111d, dev=0x803a, revid=0x0e domain=0, bus=3, slot=0, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0107, statreg=0x0010, cachelnsz=8 (dwords) lattimer=0x00 (0 ns), mingnt=0x02 (500 ns), maxlat=0x00 (0 ns) powerspec 3 supports D0 D3 current D0 pcib4: at device 0.0 on pci3 pcib3: allocated I/O port range (0x2000-0x3fff) for rid 1c of pcib4 pcib3: allocated memory range (0xa1000000-0xa2ffffff) for rid 20 of pcib4 pcib4: domain 0 pcib4: secondary bus 4 pcib4: subordinate bus 7 pcib4: I/O decode 0x2000-0x3fff pcib4: memory decode 0xa1000000-0xa2ffffff pcib4: no prefetched decode pci4: on pcib4 pci4: domain=0, physical bus=4 found-> vendor=0x111d, dev=0x803a, revid=0x0e domain=0, bus=4, slot=2, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0107, statreg=0x0010, cachelnsz=8 (dwords) lattimer=0x00 (0 ns), mingnt=0x02 (500 ns), maxlat=0x00 (0 ns) powerspec 3 supports D0 D3 current D0 MSI supports 1 message, 64 bit found-> vendor=0x111d, dev=0x803a, revid=0x0e domain=0, bus=4, slot=3, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0107, statreg=0x0010, cachelnsz=8 (dwords) lattimer=0x00 (0 ns), mingnt=0x02 (500 ns), maxlat=0x00 (0 ns) powerspec 3 supports D0 D3 current D0 MSI supports 1 message, 64 bit found-> vendor=0x111d, dev=0x803a, revid=0x0e domain=0, bus=4, slot=4, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0107, statreg=0x0010, cachelnsz=8 (dwords) lattimer=0x00 (0 ns), mingnt=0x02 (500 ns), maxlat=0x00 (0 ns) powerspec 3 supports D0 D3 current D0 MSI supports 1 message, 64 bit pcib5: at device 2.0 on pci4 pcib4: allocated I/O port range (0x2000-0x2fff) for rid 1c of pcib5 pcib4: allocated memory range (0xa1000000-0xa1ffffff) for rid 20 of pcib5 pcib5: domain 0 pcib5: secondary bus 5 pcib5: subordinate bus 5 pcib5: I/O decode 0x2000-0x2fff pcib5: memory decode 0xa1000000-0xa1ffffff pcib5: no prefetched decode pci5: on pcib5 pci5: domain=0, physical bus=5 found-> vendor=0x8086, dev=0x10d3, revid=0x00 domain=0, bus=5, slot=0, func=0 class=02-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0107, statreg=0x0010, cachelnsz=8 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=9 powerspec 2 supports D0 D3 current D0 MSI supports 1 message, 64 bit MSI-X supports 5 messages in map 0x1c map[10]: type Memory, range 32, base 0xa1000000, size 17, enabled pcib5: allocated memory range (0xa1000000-0xa101ffff) for rid 10 of pci0:5:0:0 map[18]: type I/O Port, range 32, base 0x2000, size 5, enabled pcib5: allocated I/O port range (0x2000-0x201f) for rid 18 of pci0:5:0:0 map[1c]: type Memory, range 32, base 0xa1020000, size 14, enabled pcib5: allocated memory range (0xa1020000-0xa1023fff) for rid 1c of pci0:5:0:0 pcib0: slot 24 INTC routed to irq 19 pcib3: slot 0 INTC is routed to irq 19 pcib4: slot 2 INTA is routed to irq 19 pcib5: slot 0 INTA is routed to irq 19 em0: port 0x2000-0x201f mem 0xa1000000-0xa101ffff,0xa1020000-0xa1023fff irq 19 at device 0.0 on pci5 em0: attempting to allocate 3 MSI-X vectors (5 supported) msi: routing MSI-X IRQ 257 to local APIC 0 vector 51 msi: routing MSI-X IRQ 258 to local APIC 0 vector 52 msi: routing MSI-X IRQ 259 to local APIC 0 vector 53 em0: using IRQs 257-259 for MSI-X em0: Using MSIX interrupts with 3 vectors em0: bpf attached em0: Ethernet address: 00:00:24:cf:ec:ec pcib6: at device 3.0 on pci4 pcib4: allocated I/O port range (0x3000-0x3fff) for rid 1c of pcib6 pcib4: allocated memory range (0xa2000000-0xa2ffffff) for rid 20 of pcib6 pcib6: domain 0 pcib6: secondary bus 6 pcib6: subordinate bus 6 pcib6: I/O decode 0x3000-0x3fff pcib6: memory decode 0xa2000000-0xa2ffffff pcib6: no prefetched decode pci6: on pcib6 pci6: domain=0, physical bus=6 found-> vendor=0x8086, dev=0x10d3, revid=0x00 domain=0, bus=6, slot=0, func=0 class=02-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0107, statreg=0x0010, cachelnsz=8 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=10 powerspec 2 supports D0 D3 current D0 MSI supports 1 message, 64 bit MSI-X supports 5 messages in map 0x1c map[10]: type Memory, range 32, base 0xa2000000, size 17, enabled pcib6: allocated memory range (0xa2000000-0xa201ffff) for rid 10 of pci0:6:0:0 map[18]: type I/O Port, range 32, base 0x3000, size 5, enabled pcib6: allocated I/O port range (0x3000-0x301f) for rid 18 of pci0:6:0:0 map[1c]: type Memory, range 32, base 0xa2020000, size 14, enabled pcib6: allocated memory range (0xa2020000-0xa2023fff) for rid 1c of pci0:6:0:0 pcib0: slot 24 INTD routed to irq 16 pcib3: slot 0 INTD is routed to irq 16 pcib4: slot 3 INTA is routed to irq 16 pcib6: slot 0 INTA is routed to irq 16 em1: port 0x3000-0x301f mem 0xa2000000-0xa201ffff,0xa2020000-0xa2023fff irq 16 at device 0.0 on pci6 em1: attempting to allocate 3 MSI-X vectors (5 supported) msi: routing MSI-X IRQ 260 to local APIC 0 vector 54 msi: routing MSI-X IRQ 261 to local APIC 0 vector 55 msi: routing MSI-X IRQ 262 to local APIC 0 vector 56 em1: using IRQs 260-262 for MSI-X em1: Using MSIX interrupts with 3 vectors em1: bpf attached em1: Ethernet address: 00:00:24:cf:ec:ed pcib7: at device 4.0 on pci4 pcib7: domain 0 pcib7: secondary bus 7 pcib7: subordinate bus 7 pcib7: no prefetched decode pci7: on pcib7 pci7: domain=0, physical bus=7 pcib8: irq 18 at device 25.0 on pci0 pcib8: domain 0 pcib8: secondary bus 8 pcib8: subordinate bus 12 pcib8: I/O decode 0x4000-0x5fff pcib8: memory decode 0xa3000000-0xa4ffffff pcib8: no prefetched decode pci8: on pcib8 pci8: domain=0, physical bus=8 found-> vendor=0x111d, dev=0x803a, revid=0x0e domain=0, bus=8, slot=0, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0107, statreg=0x0010, cachelnsz=8 (dwords) lattimer=0x00 (0 ns), mingnt=0x02 (500 ns), maxlat=0x00 (0 ns) powerspec 3 supports D0 D3 current D0 pcib9: at device 0.0 on pci8 pcib8: allocated I/O port range (0x4000-0x5fff) for rid 1c of pcib9 pcib8: allocated memory range (0xa3000000-0xa4ffffff) for rid 20 of pcib9 pcib9: domain 0 pcib9: secondary bus 9 pcib9: subordinate bus 12 pcib9: I/O decode 0x4000-0x5fff pcib9: memory decode 0xa3000000-0xa4ffffff pcib9: no prefetched decode pci9: on pcib9 pci9: domain=0, physical bus=9 found-> vendor=0x111d, dev=0x803a, revid=0x0e domain=0, bus=9, slot=2, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0107, statreg=0x0010, cachelnsz=8 (dwords) lattimer=0x00 (0 ns), mingnt=0x02 (500 ns), maxlat=0x00 (0 ns) powerspec 3 supports D0 D3 current D0 MSI supports 1 message, 64 bit found-> vendor=0x111d, dev=0x803a, revid=0x0e domain=0, bus=9, slot=3, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0107, statreg=0x0010, cachelnsz=8 (dwords) lattimer=0x00 (0 ns), mingnt=0x02 (500 ns), maxlat=0x00 (0 ns) powerspec 3 supports D0 D3 current D0 MSI supports 1 message, 64 bit found-> vendor=0x111d, dev=0x803a, revid=0x0e domain=0, bus=9, slot=4, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0107, statreg=0x0010, cachelnsz=8 (dwords) lattimer=0x00 (0 ns), mingnt=0x02 (500 ns), maxlat=0x00 (0 ns) powerspec 3 supports D0 D3 current D0 MSI supports 1 message, 64 bit pcib10: at device 2.0 on pci9 pcib9: allocated I/O port range (0x4000-0x4fff) for rid 1c of pcib10 pcib9: allocated memory range (0xa3000000-0xa3ffffff) for rid 20 of pcib10 pcib10: domain 0 pcib10: secondary bus 10 pcib10: subordinate bus 10 pcib10: I/O decode 0x4000-0x4fff pcib10: memory decode 0xa3000000-0xa3ffffff pcib10: no prefetched decode pci10: on pcib10 pci10: domain=0, physical bus=10 found-> vendor=0x8086, dev=0x10d3, revid=0x00 domain=0, bus=10, slot=0, func=0 class=02-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0107, statreg=0x0010, cachelnsz=8 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=10 powerspec 2 supports D0 D3 current D0 MSI supports 1 message, 64 bit MSI-X supports 5 messages in map 0x1c map[10]: type Memory, range 32, base 0xa3000000, size 17, enabled pcib10: allocated memory range (0xa3000000-0xa301ffff) for rid 10 of pci0:10:0:0 map[18]: type I/O Port, range 32, base 0x4000, size 5, enabled pcib10: allocated I/O port range (0x4000-0x401f) for rid 18 of pci0:10:0:0 map[1c]: type Memory, range 32, base 0xa3020000, size 14, enabled pcib10: allocated memory range (0xa3020000-0xa3023fff) for rid 1c of pci0:10:0:0 pcib0: slot 25 INTC routed to irq 16 pcib8: slot 0 INTC is routed to irq 16 pcib9: slot 2 INTA is routed to irq 16 pcib10: slot 0 INTA is routed to irq 16 em2: port 0x4000-0x401f mem 0xa3000000-0xa301ffff,0xa3020000-0xa3023fff irq 16 at device 0.0 on pci10 em2: attempting to allocate 3 MSI-X vectors (5 supported) msi: routing MSI-X IRQ 263 to local APIC 0 vector 57 msi: routing MSI-X IRQ 264 to local APIC 0 vector 58 msi: routing MSI-X IRQ 265 to local APIC 0 vector 59 em2: using IRQs 263-265 for MSI-X em2: Using MSIX interrupts with 3 vectors em2: bpf attached em2: Ethernet address: 00:00:24:cf:ec:ee pcib11: at device 3.0 on pci9 pcib9: allocated I/O port range (0x5000-0x5fff) for rid 1c of pcib11 pcib9: allocated memory range (0xa4000000-0xa4ffffff) for rid 20 of pcib11 pcib11: domain 0 pcib11: secondary bus 11 pcib11: subordinate bus 11 pcib11: I/O decode 0x5000-0x5fff pcib11: memory decode 0xa4000000-0xa4ffffff pcib11: no prefetched decode pci11: on pcib11 pci11: domain=0, physical bus=11 found-> vendor=0x8086, dev=0x10d3, revid=0x00 domain=0, bus=11, slot=0, func=0 class=02-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0107, statreg=0x0010, cachelnsz=8 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 powerspec 2 supports D0 D3 current D0 MSI supports 1 message, 64 bit MSI-X supports 5 messages in map 0x1c map[10]: type Memory, range 32, base 0xa4000000, size 17, enabled pcib11: allocated memory range (0xa4000000-0xa401ffff) for rid 10 of pci0:11:0:0 map[18]: type I/O Port, range 32, base 0x5000, size 5, enabled pcib11: allocated I/O port range (0x5000-0x501f) for rid 18 of pci0:11:0:0 map[1c]: type Memory, range 32, base 0xa4020000, size 14, enabled pcib11: allocated memory range (0xa4020000-0xa4023fff) for rid 1c of pci0:11:0:0 pcib0: slot 25 INTD routed to irq 17 pcib8: slot 0 INTD is routed to irq 17 pcib9: slot 3 INTA is routed to irq 17 pcib11: slot 0 INTA is routed to irq 17 em3: port 0x5000-0x501f mem 0xa4000000-0xa401ffff,0xa4020000-0xa4023fff irq 17 at device 0.0 on pci11 em3: attempting to allocate 3 MSI-X vectors (5 supported) msi: routing MSI-X IRQ 266 to local APIC 0 vector 60 msi: routing MSI-X IRQ 267 to local APIC 0 vector 61 msi: routing MSI-X IRQ 268 to local APIC 0 vector 62 em3: using IRQs 266-268 for MSI-X em3: Using MSIX interrupts with 3 vectors em3: bpf attached em3: Ethernet address: 00:00:24:cf:ec:ef pcib12: at device 4.0 on pci9 pcib12: domain 0 pcib12: secondary bus 12 pcib12: subordinate bus 12 pcib12: no prefetched decode pci12: on pcib12 pci12: domain=0, physical bus=12 pcib13: irq 19 at device 26.0 on pci0 pcib13: domain 0 pcib13: secondary bus 13 pcib13: subordinate bus 13 pcib13: no prefetched decode pci13: on pcib13 pci13: domain=0, physical bus=13 isab0: at device 31.0 on pci0 isa0: on isab0 cpu0 on motherboard est0: on cpu0 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr 614101b0600101b device_attach: est0 attach returned 6 p4tcc0: on cpu0 cpu1 on motherboard est1: on cpu1 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr 614101b0600101b device_attach: est1 attach returned 6 p4tcc1: on cpu1 ex_isa_identify() ahc_isa_probe 0: ioport 0xc00 alloc failed ahc_isa_probe 1: ioport 0x1c00 alloc failed ahc_isa_probe 2: ioport 0x2c00 alloc failed ahc_isa_probe 3: ioport 0x3c00 alloc failed ahc_isa_probe 4: ioport 0x4c00 alloc failed ahc_isa_probe 5: ioport 0x5c00 alloc failed ahc_isa_probe 6: ioport 0x6c00 alloc failed ahc_isa_probe 7: ioport 0x7c00 alloc failed ahc_isa_probe 8: ioport 0x8c00 alloc failed ahc_isa_probe 9: ioport 0x9c00 alloc failed ahc_isa_probe 10: ioport 0xac00 alloc failed ahc_isa_probe 11: ioport 0xbc00 alloc failed ahc_isa_probe 12: ioport 0xcc00 alloc failed ahc_isa_probe 13: ioport 0xdc00 alloc failed ahc_isa_probe 14: ioport 0xec00 alloc failed pnp_identify: Trying Read_Port at 203 pnp_identify: Trying Read_Port at 243 pnp_identify: Trying Read_Port at 283 pnp_identify: Trying Read_Port at 2c3 pnp_identify: Trying Read_Port at 303 pnp_identify: Trying Read_Port at 343 pnp_identify: Trying Read_Port at 383 pnp_identify: Trying Read_Port at 3c3 PNP Identify complete isa_probe_children: disabling PnP devices pmtimer0 on isa0 sc: sc0 already exists; skipping it isa_probe_children: probing non-PnP devices sc0: no video adapter found. sc0 failed to probe on isa0 vga0 failed to probe on isa0 ata0: at port 0x1f0-0x1f7,0x3f6 irq 14 on isa0 ioapic0: routing intpin 14 (ISA IRQ 14) to lapic 0 vector 63 ata1: at port 0x170-0x177,0x376 irq 15 on isa0 ioapic0: routing intpin 15 (ISA IRQ 15) to lapic 0 vector 64 atkbdc0: AT keyboard controller not found atkbdc0 failed to probe at port 0x60,0x64 on isa0 atrtc0: at port 0x70 irq 8 on isa0 atrtc0: registered as a time-of-day clock (resolution 1000000us, adjustment 0.500000000s) ioapic0: routing intpin 8 (ISA IRQ 8) to lapic 0 vector 65 Event timer "RTC" frequency 32768 Hz quality 0 attimer0: at port 0x40 on isa0 Timecounter "i8254" frequency 1193182 Hz quality 0 ioapic0: routing intpin 2 (ISA IRQ 0) to lapic 0 vector 66 Event timer "i8254" frequency 1193182 Hz quality 100 fdc0 failed to probe at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 ppc0: parallel port not found. ppc0 failed to probe at irq 7 on isa0 uart0: <16550 or compatible> at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 ioapic0: routing intpin 4 (ISA IRQ 4) to lapic 0 vector 67 uart0: fast interrupt uart0: console (115200,n,8,1) uart1 failed to probe at port 0x2f8-0x2ff irq 3 on isa0 wbwd0 failed to probe on isa0 isa_probe_children: probing PnP devices ctl: CAM Target Layer loaded est0: on cpu0 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr 614101b0600101b device_attach: est0 attach returned 6 est1: on cpu1 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr 614101b0600101b device_attach: est1 attach returned 6 Device configuration finished. procfs registered lapic: Divisor 2, Frequency 50001191 Hz Timecounters tick every 1.000 msec vlan: initialized, using hash tables with chaining lo0: bpf attached hptrr: no controller detected. usbus0: 12Mbps Full Speed USB v1.0 usbus1: 12Mbps Full Speed USB v1.0 usbus2: 12Mbps Full Speed USB v1.0 usbus3: 480Mbps High Speed USB v2.0 usbus4: 12Mbps Full Speed USB v1.0 ugen0.1: <0x8086> at usbus0 uhub0: <0x8086 OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0 ugen1.1: <0x8086> at usbus1 uhub1: <0x8086 OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1 ugen2.1: <0x8086> at usbus2 uhub2: <0x8086 OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2 ugen3.1: at usbus3 uhub3: on usbus3 ugen4.1: <0x8086> at usbus4 uhub4: <0x8086 OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4 usbus5: 12Mbps Full Speed USB v1.0 usbus6: 12Mbps Full Speed USB v1.0 usbus7: 480Mbps High Speed USB v2.0 ahcich0: AHCI reset... ugen5.1: <0x8086> at usbus5 uhub5: <0x8086 OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus5 ugen6.1: <0x8086> at usbus6 uhub6: <0x8086 OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus6 ugen7.1: at usbus7 uhub7: on usbus7 ahcich0: SATA connect time=200us status=00000123 ahcich0: AHCI reset: device found ahcich0: AHCI reset: device ready after 0ms ahcich1: AHCI reset... ahcich1: SATA connect time=200us status=00000123 ahcich1: AHCI reset: device found ahcich1: AHCI reset: device ready after 0ms ata0: reset tp1 mask=00 ostat0=ff ostat1=ff ata1: reset tp1 mask=00 ostat0=ff ostat1=ff uhub0: 1 port with 1 removable, self powered uhub1: 1 port with 1 removable, self powered uhub2: 1 port with 1 removable, self powered uhub4: 1 port with 1 removable, self powered uhub5: 1 port with 1 removable, self powered uhub6: 1 port with 1 removable, self powered uhub3: 3 ports with 3 removable, self powered uhub7: 3 ports with 3 removable, self powered ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 GEOM: new disk ada0 ada0: ATA-9 SATA 3.x device ada0: Serial Number CVLI25230584240G ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes) ada0: Command Queueing enabled ada0: 228936MB (468862128 512 byte sectors: 16H 63S/T 16383C) ada0: Previously was known as ad4 ada1 at ahcich1 bus 0 scbus1 target 0 lun 0 ada1: ATA-9 SATA 3.x device ada1: Serial Number CVLI252304G9240G ada1: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes) ada1: Command Queueing enabled ada1: 228936MB (468862128 512 byte sectors: 16H 63S/T 16383C) ada1: Previously was known as ad6 GEOM: new disk ada1 pass0 at ahcich0 bus 0 scbus0 target 0 lun 0 pass0: ATA-9 SATA 3.x device pass0: Serial Number CVLI25230584240G pass0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes) pass0: Command Queueing enabled pass1 at ahcich1 bus 0 scbus1 target 0 lun 0 pass1: ATA-9 SATA 3.x device pass1: Serial Number CVLI252304G9240G pass1: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes) pass1: Command Queueing enabled SMP: AP CPU #1 Launched! cpu1 AP: ID: 0x01000000 VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff timer: 0x000100ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400 SMP: passed TSC synchronization test TSC timecounter discards lower 7 bit(s) Timecounter "TSC-low" frequency 12500262 Hz quality 1000 GEOM_MIRROR: Device mirror/root launched (1/2). GEOM_MIRROR: Device root: rebuilding provider ada1. Trying to mount root from ufs:/dev/mirror/rootp3 [rw]... WARNING: / was not properly dismounted start_init: trying /sbin/init ahcich1: DISCONNECT requested ahcich1: AHCI reset... ahcich1: SATA connect timeout time=10000us status=00000000 ahcich1: AHCI reset: device not found (pass1:ahcich1:0:0:0): lost device (ada1:ahcich1:0:0:0): lost device GEOM_MIRROR: Synchronization request failed (error=6). ada1[WRITE(offset=3701342208, length=131072)] GEOM_MIRROR: Device root: provider ada1 disconnected. GEOM_MIRROR: Device root: rebuilding provider ada1 stopped. (pass1:(ada1:ahcich1:0:0:0): removing device entry ahcich1:0:0:0): passdevgonecb: devfs entry is gone (pass1:ahcich1:0:0:0): removing device entry ahcich1: CONNECT requested ahcich1: AHCI reset... ahcich1: SATA connect time=300us status=00000123 ahcich1: AHCI reset: device found ahcich1: AHCI reset: device ready after 0ms ahcich1: DISCONNECT requested ahcich1: AHCI reset... ahcich1: SATA connect timeout time=10000us status=00000000 ahcich1: AHCI reset: device not found (aprobe0:ahcich1:0:0:0): ATA_IDENTIFY. ACB: ec 00 00 00 00 40 00 00 00 00 00 00 (aprobe0:ahcich1:0:0:0): CAM status: Unconditionally Re-queue Request (aprobe0:ahcich1:0:0:0): Error 5, Retry was blocked em0: Link is up 1000 Mbps Full Duplex em0: link state changed to UP