Index: Uses/perl5.mk
===================================================================
--- Uses/perl5.mk	(révision 0)
+++ Uses/perl5.mk	(copie de travail)
@@ -0,0 +1,231 @@
+# $FreeBSD$
+#
+# Provide support to use perl5
+#
+# MAINTAINER: perl@FreeBSD.org
+#
+# PERL5			- Set to full path of perl5, either in the system or
+#				  installed from a port.
+# PERL			- Set to full path of perl5, either in the system or
+#				  installed from a port, but without the version number.
+#				  Use this if you need to replace "#!" lines in scripts.
+# PERL_VERSION	- Full version of perl5 (see below for current value).
+# 
+# PERL_VER	- Short version of perl5 (major.minor without patchlevel)
+#
+# PERL_LEVEL	- Perl version as an integer of the form MNNNPP, where
+#				  M is major version, N is minor version, and P is
+#				  the patch level. E.g., PERL_VERSION=5.14.2 would give
+#				  a PERL_LEVEL of 501402. This can be used in comparisons
+#				  to determine if the version of perl is high enough,
+#				  whether a particular dependency is needed, etc.
+# PERL_ARCH		- Directory name of architecture dependent libraries
+#				  (value: mach).
+# PERL_PORT		- Name of the perl port that is installed
+#				  (value: perl5.14)
+# SITE_PERL		- Directory name where site specific perl packages go.
+#				  This value is added to PLIST_SUB.
+# USE_PERL5		- If set, this port uses perl5 in one or more of the extract,
+#				  patch, build, install or run phases
+
+.if !defined(_INCLUDE_USES_PERL5_MK)
+_INCLUDE_USES_PERL5_MK=	yes
+
+.if defined(perl5_ARGS)
+IGNORE=	Incorrect 'USES+=perl5:${perl5_ARGS}' perl5 takes no arguments
+.endif
+
+USE_PERL5?=	run build
+
+.if exists(${LOCALBASE}/bin/perl5)
+.sinclude "${LOCALBASE}/etc/perl5_version"
+.if !defined(PERL_VERSION)
+PERL_VERSION!=	perl -e 'printf "%vd\n", $$^V;'
+.endif
+.else
+PERL_VERSION?=	5.14.4
+.endif
+
+PERL_VER?=	${PERL_VERSION:C/\.[0-9]+$//}
+
+.if !defined(PERL_LEVEL) && defined(PERL_VERSION)
+perl_major=		${PERL_VERSION:C|^([1-9]+).*|\1|}
+_perl_minor=	00${PERL_VERSION:C|^([1-9]+)\.([0-9]+).*|\2|}
+perl_minor=		${_perl_minor:C|^.*(...)|\1|}
+.if ${perl_minor} >= 100
+perl_minor=		${PERL_VERSION:C|^([1-9]+)\.([0-9][0-9][0-9]).*|\2|}
+perl_patch=		${PERL_VERSION:C|^.*(..)|\1|}
+.else # ${perl_minor} < 100
+_perl_patch=	0${PERL_VERSION:C|^([1-9]+)\.([0-9]+)\.*|0|}
+perl_patch=		${_perl_patch:C|^.*(..)|\1|}
+.endif # ${perl_minor} < 100
+PERL_LEVEL=	${perl_major}${perl_minor}${perl_patch}
+.else
+PERL_LEVEL=0
+.endif # !defined(PERL_LEVEL) && defined(PERL_VERSION)
+
+PERL_ARCH?=		mach
+
+# there must always be a default to prevent dependency failures such
+# as "ports/lang: not found"
+.if    ${PERL_LEVEL} >= 501600
+PERL_PORT?=	perl5.16
+.elif  ${PERL_LEVEL} >= 501400
+PERL_PORT?=	perl5.14
+.else  # ${PERL_LEVEL} < 501400
+PERL_PORT?=	perl5.12
+.endif
+
+SITE_PERL_REL?=	lib/perl5/site_perl/${PERL_VER}
+SITE_PERL?=	${LOCALBASE}/${SITE_PERL_REL}
+
+PERL5=		${LOCALBASE}/bin/perl${PERL_VERSION}
+PERL=		${LOCALBASE}/bin/perl
+
+# Define the want perl first if defined
+.if ${USE_PERL5:M5*}
+want_perl_sign=		${USE_PERL5:M5*:C|^[0-9.]+||}
+want_perl_ver=		${USE_PERL5:M5*:S|${want_perl_sign}$||}
+want_perl_major=	${want_perl_ver:C|\..*||}
+_want_perl_minor=	${want_perl_ver:S|^${want_perl_major}||:S|^.||:C|\..*||}
+_want_perl_patch=	${want_perl_ver:S|^${want_perl_major}||:S|^.${_want_perl_minor}||:S|^.||:C|\..*||}
+want_perl_minor=	${_want_perl_minor:S|^|000|:C|.*(...)|\1|}
+want_perl_patch=	${_want_perl_patch:S|^|00|:C|.*(..)|\1|}
+USE_PERL5_LEVEL=	${want_perl_major}${want_perl_minor}${want_perl_patch}
+.endif
+
+# All but version
+_USE_PERL5=	${USE_PERL5:N5*}
+
+# Mask unspecified components. E.g. this way "5" will match any "5.x.x".
+.if empty(_want_perl_minor)
+masked_PERL_LEVEL=	${PERL_LEVEL:C|(.....)$|00000|}
+.elif empty(_want_perl_patch)
+masked_PERL_LEVEL=	${PERL_LEVEL:C|(..)$|00|}
+.else
+masked_PERL_LEVEL=	${PERL_LEVEL}
+.endif
+
+.if defined(want_perl_sign)
+.if ${want_perl_sign} == "+"
+.if ${USE_PERL5_LEVEL} > ${masked_PERL_LEVEL}
+USE_PERL5_REASON?=	requires Perl ${want_perl_ver} or later, install lang/perl${want_perl_major}.${want_perl_minor:C|^0||} and try again
+IGNORE=	${USE_PERL5_REASON}
+.endif # ${USE_PERL5_LEVEL} > ${masked_PERL_LEVEL}
+.elif ${want_perl_sign} == ""
+.if ${USE_PERL5_LEVEL} != ${masked_PERL_LEVEL}
+USE_PERL5_REASON?=	requires Perl ${want_perl_ver} exactly
+IGNORE=	${USE_PERL5_REASON}
+.endif # ${USE_PERL5_LEVEL} != ${masked_PERL_LEVEL}
+.elif ${want_perl_sign} == "-"
+.if ${USE_PERL5_LEVEL} <= ${masked_PERL_LEVEL}
+USE_PERL5_REASON?=	requires a Perl version earlier than ${want_perl_ver}
+IGNORE=	${USE_PERL5_REASON}
+.endif # ${USE_PERL5_LEVEL} <= ${masked_PERL_LEVEL}
+.else # wrong suffix
+IGNORE=	improper use of USE_PERL5
+.endif
+.endif
+
+_USES_POST+=	perl5
+.endif
+
+.if defined(_POSTMKINCLUDED) && !defined(_INCLUDE_USES_PERL5_POST_MK)
+_INCLUDE_USES_PERL5_POST_MK=	yes
+
+PLIST_SUB+=	PERL_VERSION=${PERL_VERSION} \
+		PERL_VER=${PERL_VER} \
+		PERL_ARCH=${PERL_ARCH} \
+		SITE_PERL=${SITE_PERL_REL}
+
+# handle perl5 specific manpages
+.for sect in 1 2 3 4 5 6 7 8 9
+.if defined(P5MAN${sect})
+_MANPAGES+=	${P5MAN${sect}:S%^%${PREFIX}/lib/perl5/${PERL_VER}/man/man${sect}/%}
+.endif
+.endfor
+
+.if ${_USE_PERL5:Mmodbuild}
+_USE_PERL5+=		configure
+CONFIGURE_SCRIPT?=	Build.PL
+.if ${PORTNAME} != Module-Build
+BUILD_DEPENDS+=		${SITE_PERL}/Module/Build.pm:${PORTSDIR}/devel/p5-Module-Build
+.endif
+ALL_TARGET?=
+PL_BUILD?=		Build
+CONFIGURE_ARGS+= \
+		create_packlist=0 \
+		install_path=lib="${PREFIX}/${SITE_PERL_REL}" \
+		install_path=arch="${PREFIX}/${SITE_PERL_REL}/${PERL_ARCH}" \
+		install_path=script="${PREFIX}/bin" \
+		install_path=bin="${PREFIX}/bin" \
+		install_path=libdoc="${MAN3PREFIX}/man/man3" \
+		install_path=bindoc="${MAN1PREFIX}/man/man1"
+.elif ${_USE_PERL5:Mconfigure}
+CONFIGURE_ARGS+=	INSTALLDIRS="site"
+.endif # modbuild
+
+.if ${_USE_PERL5:Mconfigure}
+_USE_PERL5+=	build run
+# Disable AutoInstall from attempting to install from CPAN directly in
+# the case of missing dependencies.  This causes the build to loop on
+# the build cluster asking for interactive input.
+CONFIGURE_ENV+= PERL_EXTUTILS_AUTOINSTALL="--skipdeps"
+.if defined(BATCH) && !defined(IS_INTERACTIVE)
+CONFIGURE_ENV+=	PERL_MM_USE_DEFAULT="YES"
+.endif # defined(BATCH) && !defined(IS_INTERACTIVE)
+.endif # configure
+
+.if ${_USE_PERL5:Mextract}
+EXTRACT_DEPENDS+=	${PERL5}:${PORTSDIR}/lang/${PERL_PORT}
+.endif
+
+.if ${_USE_PERL5:Mpatch}
+PATCH_DEPENDS+=		${PERL5}:${PORTSDIR}/lang/${PERL_PORT}
+.endif
+
+.if ${_USE_PERL5:Mbuild}
+BUILD_DEPENDS+=		${PERL5}:${PORTSDIR}/lang/${PERL_PORT}
+.endif
+
+.if ${_USE_PERL5:Mrun}
+RUN_DEPENDS+=		${PERL5}:${PORTSDIR}/lang/${PERL_PORT}
+.endif
+
+.if ${_USE_PERL5:Mconfigure}
+CONFIGURE_ARGS+=	CC="${CC}" CCFLAGS="${CFLAGS}" PREFIX="${PREFIX}" \
+			INSTALLPRIVLIB="${PREFIX}/lib" INSTALLARCHLIB="${PREFIX}/lib"
+CONFIGURE_SCRIPT?=	Makefile.PL
+MAN3PREFIX?=		${PREFIX}/lib/perl5/${PERL_VER}
+.undef HAS_CONFIGURE
+
+.if !target(do-configure)
+do-configure:
+	@if [ -f ${SCRIPTDIR}/configure ]; then \
+		cd ${.CURDIR} && ${SETENV} ${SCRIPTS_ENV} ${SH} \
+		  ${SCRIPTDIR}/configure; \
+	fi
+	@cd ${CONFIGURE_WRKSRC} && \
+		${SETENV} ${CONFIGURE_ENV} \
+		${PERL5} ./${CONFIGURE_SCRIPT} ${CONFIGURE_ARGS}
+.if !${_USE_PERL5:Mmodbuild}
+	@cd ${CONFIGURE_WRKSRC} && \
+		${PERL5} -pi -e 's/ doc_(perl|site|\$$\(INSTALLDIRS\))_install$$//' Makefile
+.endif # ! modbuild
+.endif # !target(do-configure)
+.endif # configure
+
+.if ${_USE_PERL5:Mmodbuild}
+.if !target(do-build)
+do-build:
+	@(cd ${BUILD_WRKSRC}; ${SETENV} ${MAKE_ENV} ${PERL5} ${PL_BUILD} ${MAKE_ARGS} ${ALL_TARGET})
+.endif # !target(do-build)
+
+.if !${USES:Mgmake}
+.if !target(do-install)
+do-install:
+	@(cd ${BUILD_WRKSRC}; ${SETENV} ${MAKE_ENV} ${PERL5} ${PL_BUILD} ${MAKE_ARGS} ${INSTALL_TARGET})
+.endif # !target(do-install)
+.endif # ! USES=gmake
+.endif # modbuild
+.endif # defined(_POSTMKINCLUDED)

Modification de propriétés sur Uses/perl5.mk
___________________________________________________________________
Added: svn:eol-style
## -0,0 +1 ##
+native
\ No newline at end of property
Added: svn:mime-type
## -0,0 +1 ##
+text/plain
\ No newline at end of property
Added: svn:keywords
## -0,0 +1 ##
+FreeBSD=%H
\ No newline at end of property
Index: bsd.perl.mk
===================================================================
--- bsd.perl.mk	(révision 323865)
+++ bsd.perl.mk	(copie de travail)
@@ -43,6 +43,7 @@
 # USE_PERL5_RUN		- If set, this port uses perl5 for running.
 #
 # PERL_MODBUILD		- Use Module::Build to configure, build and install port.
+.if !defined(USES) || !${USES:Mperl5}
 
 .if !defined(_POSTMKINCLUDED) && !defined(Perl_Pre_Include)
 
@@ -231,3 +232,4 @@
 .endif # !defined(USE_GMAKE)
 .endif # defined(PERL_MODBUILD)
 .endif # defined(_POSTMKINCLUDED) && !defined(Perl_Post_Include)
+.endif