[drm] cmdline mode for connector DVI-I-1  1280x1024@60Hz
[drm] Default TV standard: NTSC
[drm] cmdline mode for connector DIN-1  1280x1024@60Hz
[drm] Default TV standard: NTSC
[drm] cmdline mode for connector DVI-I-2  1280x1024@60Hz
[drm] Radeon Display Connectors
[drm] Connector 0:
[drm]   DVI-I-1
[drm]   HPD1
[drm]   DDC: 0x7e50 0x7e50 0x7e54 0x7e54 0x7e58 0x7e58 0x7e5c 0x7e5c
[drm]   Encoders:
[drm]     DFP1: INTERNAL_KLDSCP_TMDS1
[drm]     CRT2: INTERNAL_KLDSCP_DAC2
[drm] Connector 1:
[drm]   DIN-1
[drm]   Encoders:
[drm]     TV1: INTERNAL_KLDSCP_DAC2
[drm] Connector 2:
[drm]   DVI-I-2
[drm]   HPD2
[drm]   DDC: 0x7e40 0x7e40 0x7e44 0x7e44 0x7e48 0x7e48 0x7e4c 0x7e4c
[drm]   Encoders:
[drm]     CRT1: INTERNAL_KLDSCP_DAC1
[drm]     DFP2: INTERNAL_LVTM1
[drm] encoder dpms 19 to mode 3, devices 00000008, active_devices 00000000
[drm] encoder dpms 22 to mode 3, devices 00000014, active_devices 00000000
[drm] encoder dpms 21 to mode 3, devices 00000001, active_devices 00000000
[drm] encoder dpms 15 to mode 3, devices 00000080, active_devices 00000000
[drm] 
[drm] [CONNECTOR:46:DVI-I-1]
[drm] Bios 0 scratch 20000 00000014
[drm] DFP1 disconnected
[drm] CRT2 disconnected
[drm] [CONNECTOR:46:DVI-I-1] status updated from unknown to disconnected
[drm] [CONNECTOR:46:DVI-I-1] disconnected
[drm] [CONNECTOR:48:DIN-1]
[drm] Bios 0 scratch 20000 00000014
[drm] TV1 disconnected
[drm] [CONNECTOR:48:DIN-1] status updated from unknown to disconnected
[drm] [CONNECTOR:48:DIN-1] disconnected
[drm] [CONNECTOR:50:DVI-I-2]
[drm] Bios 0 scratch 20002 00000001
[drm] CRT1 connected
[drm] DFP2 disconnected
[drm] [CONNECTOR:50:DVI-I-2] status updated from unknown to connected
[drm] [CONNECTOR:50:DVI-I-2] probed modes :
[drm] Modeline "1280x1024": 60 108879 1280 1360 1496 1712 1024 1025 1028 1060 0x20 0x6
[drm] Modeline "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
[drm] Modeline "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
[drm] Modeline "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
[drm] Modeline "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
[drm] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
[drm] connector 46 enabled? no
[drm] connector 48 enabled? no
[drm] connector 50 enabled? yes
[drm] looking for cmdline mode on connector 50
[drm] found mode 1280x1024
[drm] picking CRTCs for 8192x8192 config
[drm] desired mode 1280x1024 set on crtc 42 (0,0)
drmn0: [drm] drm_fb_helper_single_fb_probedrmn0: [drm] drm_fb_helper_single_fb_probe<6>[drm] fb mappable at 0xE0243000
[drm] vram apper at 0xE0000000
[drm] size 5242880
[drm] fb depth is 24
[drm]    pitch is 5120
[drm] [CRTC:42:crtc-0] [FB:52] #connectors=1 (x y) (0 0)
[drm] crtc has no fb, full mode set
[drm] modes are different, full mode set
[drm] Modeline "": 0 0 0 0 0 0 0 0 0 0 0x0 0x0
[drm] Modeline "1280x1024": 60 108879 1280 1360 1496 1712 1024 1025 1028 1060 0x20 0x6
[drm] encoder changed, full mode switch
[drm] crtc changed, full mode switch
[drm] [CONNECTOR:50:DVI-I-2] to [CRTC:42:crtc-0]
[drm] attempting to set mode from userspace
[drm] Modeline "1280x1024": 60 108879 1280 1360 1496 1712 1024 1025 1028 1060 0x20 0x6
[drm] setting active device to 00000001 from 00000001 00000081 for encoder 4
[drm] [CRTC:42:crtc-0]
[drm] encoder dpms 19 to mode 3, devices 00000008, active_devices 00000000
[drm] encoder dpms 22 to mode 3, devices 00000014, active_devices 00000000
[drm] encoder dpms 15 to mode 3, devices 00000080, active_devices 00000000
[drm] 108879 - 108850, pll dividers - fb: 254.0 ref: 7, post 9
[drm] encoder dpms 21 to mode 3, devices 00000001, active_devices 00000001
[drm] 
[drm] 
[drm] Setting connector DPMS state to on
[drm] 	[CONNECTOR:50:DVI-I-2] set DPMS on
[drm] encoder dpms 19 to mode 3, devices 00000008, active_devices 00000000
[drm] encoder dpms 22 to mode 3, devices 00000014, active_devices 00000000
[drm] encoder dpms 15 to mode 3, devices 00000080, active_devices 00000000
[drm] 
[drm] [CRTC:44:crtc-1] [NOFB]
[drm] encoder dpms 19 to mode 3, devices 00000008, active_devices 00000000
[drm] encoder dpms 22 to mode 3, devices 00000014, active_devices 00000000
[drm] encoder dpms 15 to mode 3, devices 00000080, active_devices 00000000
[drm] Initialized radeon 2.50.0 20080528 for drmn0 on minor 0
drmn0: [drm] 
[drm] 
[drm] Bios 0 scratch 2 00000014
[drm] DFP1 disconnected
[drm] CRT2 disconnected
[drm] [CONNECTOR:46:DVI-I-1] disconnected
[drm] [CONNECTOR:48:DIN-1]
[drm] Bios 0 scratch 2 00000014
[drm] TV1 disconnected
[drm] [CONNECTOR:48:DIN-1] disconnected
[drm] [CONNECTOR:50:DVI-I-2]
[drm] Bios 0 scratch 2 00000001
[drm] CRT1 connected
[drm] DFP2 disconnected
[drm] [CONNECTOR:50:DVI-I-2] probed modes :
[drm] Modeline "1280x1024": 60 108879 1280 1360 1496 1712 1024 1025 1028 1060 0x20 0x6
[drm] Modeline "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
[drm] Modeline "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
[drm] Modeline "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
[drm] Modeline "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
[drm] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
[drm] connector 46 enabled? no
[drm] connector 48 enabled? no
[drm] connector 50 enabled? yes
[drm] looking for cmdline mode on connector 50
[drm] found mode 1280x1024
[drm] picking CRTCs for 1280x1024 config
[drm] desired mode 1280x1024 set on crtc 42 (0,0)
[drm] 
[drm] [CRTC:42:crtc-0] [FB:52] #connectors=1 (x y) (0 0)
[drm] [CONNECTOR:50:DVI-I-2] to [CRTC:42:crtc-0]
[drm] 
[drm] [CRTC:44:crtc-1] [NOFB]
[drm] encoder dpms 19 to mode 3, devices 00000008, active_devices 00000000
[drm] encoder dpms 22 to mode 3, devices 00000014, active_devices 00000000
[drm] encoder dpms 15 to mode 3, devices 00000080, active_devices 00000000