Copyright (c) 1992-2009 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 8.0-BETA2 #3 r195941: Wed Jul 29 16:19:30 EEST 2009
    avg@odyssey.starpoint.kiev.ua:/usr/obj/usr/src-head/sys/ODYSSEYhead
Preloaded elf kernel "/boot/kernel/kernel" at 0xffffffff80e2d000.
Preloaded elf obj module "/boot/kernel/zfs.ko" at 0xffffffff80e2d288.
Preloaded elf obj module "/boot/kernel/opensolaris.ko" at 0xffffffff80e2d970.
Preloaded elf obj module "/boot/kernel/if_ed.ko" at 0xffffffff80e2dfe0.
Preloaded elf obj module "/boot/kernel/miibus.ko" at 0xffffffff80e2e5c8.
Preloaded /boot/zfs/zpool.cache "/boot/zfs/zpool.cache" at 0xffffffff80e2ebb0.
Timecounter "i8254" frequency 1193182 Hz quality 0
Calibrating TSC clock ... TSC clock: 2674574190 Hz
CPU: Intel(R) Core(TM)2 Duo CPU     E7300  @ 2.66GHz (2674.57-MHz K8-class CPU)
  Origin = "GenuineIntel"  Id = 0x10676  Stepping = 6
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=0x8e39d<SSE3,DTES64,MON,DS_CPL,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1>
  AMD Features=0x20100800<SYSCALL,NX,LM>
  AMD Features2=0x1<LAHF>
  TSC: P-state invariant
real memory  = 4294967296 (4096 MB)
Physical memory chunk(s):
0x0000000000001000 - 0x0000000000099fff, 626688 bytes (153 pages)
0x0000000000e5d000 - 0x00000000c54b4fff, 3294986240 bytes (804440 pages)
0x00000000ce294000 - 0x00000000cf4c3fff, 19070976 bytes (4656 pages)
0x00000000cf4c6000 - 0x00000000cf586fff, 790528 bytes (193 pages)
0x00000000cf5e3000 - 0x00000000cf5e6fff, 16384 bytes (4 pages)
0x00000000cf5f2000 - 0x00000000cf5f2fff, 4096 bytes (1 pages)
0x00000000cf5ff000 - 0x00000000cf5fffff, 4096 bytes (1 pages)
0x0000000100000000 - 0x000000012bfdffff, 738066432 bytes (180192 pages)
avail memory = 4030959616 (3844 MB)
ACPI APIC Table: <INTEL  DG33TL  >
INTR: Adding local APIC 1 as a target
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
FreeBSD/SMP: 1 package(s) x 2 core(s)
 cpu0 (BSP): APIC ID:  0
 cpu1 (AP): APIC ID:  1
APIC: CPU 0 has ACPI ID 1
APIC: CPU 1 has ACPI ID 2
ULE: setup cpu 0
ULE: setup cpu 1
This module (opensolaris) contains code covered by the
Common Development and Distribution License (CDDL)
see http://opensolaris.org/os/licensing/opensolaris_license/
ACPI: RSDP 0xfe020 00014 (v0 INTEL )
ACPI: RSDT 0xcf5fd038 00068 (v1 INTEL  DG33TL   00000205      01000013)
ACPI: FACP 0xcf5fc000 00074 (v1 INTEL  DG33TL   00000205 MSFT 01000013)
ACPI: DSDT 0xcf5f8000 03DE9 (v1 INTEL  DG33TL   00000205 MSFT 01000013)
ACPI: FACS 0xcf592000 00040
ACPI: APIC 0xcf5f7000 00078 (v1 INTEL  DG33TL   00000205 MSFT 01000013)
ACPI: WDDT 0xcf5f6000 00040 (v1 INTEL  DG33TL   00000205 MSFT 01000013)
ACPI: MCFG 0xcf5f5000 0003C (v1 INTEL  DG33TL   00000205 MSFT 01000013)
ACPI: ASF! 0xcf5f4000 000A6 (v32 INTEL  DG33TL   00000205 MSFT 01000013)
ACPI: HPET 0xcf5f3000 00038 (v1 INTEL  DG33TL   00000205 MSFT 01000013)
ACPI: ASPT 0xcf5f1000 00034 (v3 INTEL  DG33TL   00000205 MSFT 01000013)
ACPI: WDTT 0xcf5f0000 002CC (v1 INTEL  DG33TL   00000205 MSFT 01000013)
ACPI: SSDT 0xcf5ef000 00204 (v1 INTEL     CpuPm 00000205 MSFT 01000013)
ACPI: SSDT 0xcf5ee000 0023B (v1 INTEL   Cpu0Ist 00000205 MSFT 01000013)
ACPI: SSDT 0xcf5ed000 0023B (v1 INTEL   Cpu1Ist 00000205 MSFT 01000013)
ACPI: SSDT 0xcf5ec000 0023B (v1 INTEL   Cpu2Ist 00000205 MSFT 01000013)
ACPI: SSDT 0xcf5eb000 0023B (v1 INTEL   Cpu3Ist 00000205 MSFT 01000013)
ACPI: SSDT 0xcf5ea000 001CF (v1 INTEL   Cpu0Cst 00000205 MSFT 01000013)
ACPI: SSDT 0xcf5e9000 001CF (v1 INTEL   Cpu1Cst 00000205 MSFT 01000013)
ACPI: SSDT 0xcf5e8000 001CF (v1 INTEL   Cpu2Cst 00000205 MSFT 01000013)
ACPI: SSDT 0xcf5e7000 001CF (v1 INTEL   Cpu3Cst 00000205 MSFT 01000013)
MADT: Found IO APIC ID 2, Interrupt 0 at 0xfec00000
ioapic0: Changing APIC ID to 2
ioapic0: Routing external 8259A's -> intpin 0
MADT: Interrupt override: source 0, irq 2
ioapic0: Routing IRQ 0 -> intpin 2
MADT: Interrupt override: source 9, irq 9
ioapic0: intpin 9 trigger: level
lapic0: Routing NMI -> LINT1
lapic0: LINT1 trigger: edge
lapic0: LINT1 polarity: high
lapic1: Routing NMI -> LINT1
lapic1: LINT1 trigger: edge
lapic1: LINT1 polarity: high
ioapic0 <Version 2.0> irqs 0-23 on motherboard
cpu0 BSP:
     ID: 0x00000000   VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff
  lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
  timer: 0x000100ef therm: 0x00010000 err: 0x00010000 pcm: 0x00010000
null: <null device, zero device>
random: <entropy source, Software, Yarrow>
ichwd module loaded
io: <I/O>
nfslock: pseudo-device
kbd0 at kbdmux0
mem: <memory>
acpi0: <INTEL DG33TL> on motherboard
PCIe: Memory Mapped configuration base @ 0xf0000000
ioapic0: routing intpin 9 (ISA IRQ 9) to lapic 0 vector 48
acpi0: [MPSAFE]
acpi0: [ITHREAD]
acpi0: Power Button (fixed)
acpi0: wakeup code va 0xffffff800000f000 pa 0x4000
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: \\_SB_.PCI0.TMEM -> bus 0 dev 0 func 0
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: \\_SB_.PCI0.PAMX -> bus 0 dev 0 func 0
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: \\_SB_.PCI0.LPC_.PRR0 -> bus 0 dev 31 func 0
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: \\_SB_.PCI0.LPC_.PRR1 -> bus 0 dev 31 func 0
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: \\_SB_.PCI0.LPC_.IELK.ELR0 -> bus 0 dev 0 func 0
ACPI timer: 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 -> 10
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
pci_link0:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0   11   N     0  3 4 5 7 9 10 11 12
  Validation          0   11   N     0  3 4 5 7 9 10 11 12
  After Disable       0  255   N     0  3 4 5 7 9 10 11 12
pci_link1:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0    9   N     0  3 4 5 7 9 10 11 12
  Validation          0    9   N     0  3 4 5 7 9 10 11 12
  After Disable       0  255   N     0  3 4 5 7 9 10 11 12
pci_link2:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0   10   N     0  3 4 5 7 9 10 11 12
  Validation          0   10   N     0  3 4 5 7 9 10 11 12
  After Disable       0  255   N     0  3 4 5 7 9 10 11 12
pci_link3:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0   11   N     0  3 4 5 7 9 10 11 12
  Validation          0   11   N     0  3 4 5 7 9 10 11 12
  After Disable       0  255   N     0  3 4 5 7 9 10 11 12
pci_link4:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0    9   N     0  3 4 5 7 9 10 11 12
  Validation          0    9   N     0  3 4 5 7 9 10 11 12
  After Disable       0  255   N     0  3 4 5 7 9 10 11 12
pci_link5:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0   11   N     0  3 4 5 7 9 10 11 12
  Validation          0   11   N     0  3 4 5 7 9 10 11 12
  After Disable       0  255   N     0  3 4 5 7 9 10 11 12
pci_link6:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0   10   N     0  3 4 5 7 9 10 11 12
  Validation          0   10   N     0  3 4 5 7 9 10 11 12
  After Disable       0  255   N     0  3 4 5 7 9 10 11 12
pci_link7:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0   11   N     0  3 4 5 7 9 10 11 12
  Validation          0   11   N     0  3 4 5 7 9 10 11 12
  After Disable       0  255   N     0  3 4 5 7 9 10 11 12
acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
acpi_hpet0: vend: 0x8086 rev: 0x1 num: 4 hz: 14318180 opts: legacy_route 64-bit
acpi_hpet0: using timer #0 for clock
acpi_hpet0: trying IRQ #20
ioapic0: routing intpin 20 (PCI IRQ 20) to lapic 0 vector 49
acpi_hpet0: [MPSAFE]
acpi_hpet0: [FILTER]
acpi_hpet0: using IRQ #20
acpi_hpet0: setting comparator to 7159 to get 2000 intr/s
Timecounter "HPET" frequency 14318180 Hz quality 900
acpi_button0: <Sleep Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pci0: domain=0, physical bus=0
found->	vendor=0x8086, dev=0x29c0, revid=0x02
	domain=0, bus=0, slot=0, func=0
	class=06-00-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0006, statreg=0x2090, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found->	vendor=0x8086, dev=0x29c2, revid=0x02
	domain=0, bus=0, slot=2, func=0
	class=03-00-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0007, statreg=0x0090, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=11
	powerspec 2  supports D0 D3  current D0
	MSI supports 1 message
	map[10]: type Memory, range 32, base 0xe0380000, size 19, enabled
	map[14]: type I/O Port, range 32, base 0x2430, size  3, enabled
	map[18]: type Prefetchable Memory, range 32, base 0xd0000000, size 28, enabled
	map[1c]: type Memory, range 32, base 0xe0200000, size 20, enabled
pcib0: matched entry for 0.2.INTA
pcib0: slot 2 INTA hardwired to IRQ 16
found->	vendor=0x8086, dev=0x29c3, revid=0x02
	domain=0, bus=0, slot=2, func=1
	class=03-80-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0007, statreg=0x0090, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	powerspec 2  supports D0 D3  current D0
	map[10]: type Memory, range 32, base 0xe0300000, size 19, enabled
found->	vendor=0x8086, dev=0x29c4, revid=0x02
	domain=0, bus=0, slot=3, func=0
	class=07-80-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0006, statreg=0x0010, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=11
	powerspec 3  supports D0 D3  current D0
	MSI supports 1 message, 64 bit
	map[10]: type Memory, range 64, base 0xe0426100, size  4, enabled
pcib0: matched entry for 0.3.INTA
pcib0: slot 3 INTA hardwired to IRQ 16
found->	vendor=0x8086, dev=0x294c, revid=0x02
	domain=0, bus=0, slot=25, func=0
	class=02-00-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0007, statreg=0x0010, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=9
	powerspec 2  supports D0 D3  current D0
	MSI supports 1 message, 64 bit
	map[10]: type Memory, range 32, base 0xe0400000, size 17, enabled
	map[14]: type Memory, range 32, base 0xe0424000, size 12, enabled
	map[18]: type I/O Port, range 32, base 0x2400, size  5, enabled
pcib0: matched entry for 0.25.INTA
pcib0: slot 25 INTA hardwired to IRQ 20
found->	vendor=0x8086, dev=0x2937, revid=0x02
	domain=0, bus=0, slot=26, func=0
	class=0c-03-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=10
	map[20]: type I/O Port, range 32, base 0x20e0, size  5, enabled
pcib0: matched entry for 0.26.INTA
pcib0: slot 26 INTA hardwired to IRQ 18
found->	vendor=0x8086, dev=0x2938, revid=0x02
	domain=0, bus=0, slot=26, func=1
	class=0c-03-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=b, irq=11
	map[20]: type I/O Port, range 32, base 0x20c0, size  5, enabled
pcib0: matched entry for 0.26.INTB
pcib0: slot 26 INTB hardwired to IRQ 21
found->	vendor=0x8086, dev=0x2939, revid=0x02
	domain=0, bus=0, slot=26, func=2
	class=0c-03-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=c, irq=9
	map[20]: type I/O Port, range 32, base 0x20a0, size  5, enabled
pcib0: matched entry for 0.26.INTC
pcib0: slot 26 INTC hardwired to IRQ 17
found->	vendor=0x8086, dev=0x293c, revid=0x02
	domain=0, bus=0, slot=26, func=7
	class=0c-03-20, hdrtype=0x00, mfdev=0
	cmdreg=0x0006, statreg=0x0290, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=c, irq=9
	powerspec 2  supports D0 D3  current D0
	map[10]: type Memory, range 32, base 0xe0425c00, size 10, enabled
pcib0: matched entry for 0.26.INTC
pcib0: slot 26 INTC hardwired to IRQ 17
found->	vendor=0x8086, dev=0x293e, revid=0x02
	domain=0, bus=0, slot=27, func=0
	class=04-03-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0006, statreg=0x0010, cachelnsz=16 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=10
	powerspec 2  supports D0 D3  current D0
	MSI supports 1 message, 64 bit
	map[10]: type Memory, range 64, base 0xe0420000, size 14, enabled
pcib0: matched entry for 0.27.INTA
pcib0: slot 27 INTA hardwired to IRQ 22
found->	vendor=0x8086, dev=0x2940, revid=0x02
	domain=0, bus=0, slot=28, func=0
	class=06-04-00, hdrtype=0x01, mfdev=1
	cmdreg=0x0000, statreg=0x0010, cachelnsz=16 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=255
	powerspec 2  supports D0 D3  current D0
	MSI supports 1 message
found->	vendor=0x8086, dev=0x2942, revid=0x02
	domain=0, bus=0, slot=28, func=1
	class=06-04-00, hdrtype=0x01, mfdev=1
	cmdreg=0x0000, statreg=0x0010, cachelnsz=16 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns)
	intpin=b, irq=255
	powerspec 2  supports D0 D3  current D0
	MSI supports 1 message
found->	vendor=0x8086, dev=0x2944, revid=0x02
	domain=0, bus=0, slot=28, func=2
	class=06-04-00, hdrtype=0x01, mfdev=1
	cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns)
	intpin=c, irq=255
	powerspec 2  supports D0 D3  current D0
	MSI supports 1 message
found->	vendor=0x8086, dev=0x2946, revid=0x02
	domain=0, bus=0, slot=28, func=3
	class=06-04-00, hdrtype=0x01, mfdev=1
	cmdreg=0x0000, statreg=0x0010, cachelnsz=16 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns)
	intpin=d, irq=255
	powerspec 2  supports D0 D3  current D0
	MSI supports 1 message
found->	vendor=0x8086, dev=0x2948, revid=0x02
	domain=0, bus=0, slot=28, func=4
	class=06-04-00, hdrtype=0x01, mfdev=1
	cmdreg=0x0000, statreg=0x0010, cachelnsz=16 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=255
	powerspec 2  supports D0 D3  current D0
	MSI supports 1 message
found->	vendor=0x8086, dev=0x2934, revid=0x02
	domain=0, bus=0, slot=29, func=0
	class=0c-03-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=11
	map[20]: type I/O Port, range 32, base 0x2080, size  5, enabled
pcib0: matched entry for 0.29.INTA
pcib0: slot 29 INTA hardwired to IRQ 23
found->	vendor=0x8086, dev=0x2935, revid=0x02
	domain=0, bus=0, slot=29, func=1
	class=0c-03-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=b, irq=11
	map[20]: type I/O Port, range 32, base 0x2060, size  5, enabled
pcib0: matched entry for 0.29.INTB
pcib0: slot 29 INTB hardwired to IRQ 19
found->	vendor=0x8086, dev=0x2936, revid=0x02
	domain=0, bus=0, slot=29, func=2
	class=0c-03-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=c, irq=10
	map[20]: type I/O Port, range 32, base 0x2040, size  5, enabled
pcib0: matched entry for 0.29.INTC
pcib0: slot 29 INTC hardwired to IRQ 18
found->	vendor=0x8086, dev=0x293a, revid=0x02
	domain=0, bus=0, slot=29, func=7
	class=0c-03-20, hdrtype=0x00, mfdev=0
	cmdreg=0x0006, statreg=0x0290, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=11
	powerspec 2  supports D0 D3  current D0
	map[10]: type Memory, range 32, base 0xe0425800, size 10, enabled
pcib0: matched entry for 0.29.INTA
pcib0: slot 29 INTA hardwired to IRQ 23
found->	vendor=0x8086, dev=0x244e, revid=0x92
	domain=0, bus=0, slot=30, func=0
	class=06-04-01, hdrtype=0x01, mfdev=0
	cmdreg=0x0107, statreg=0x0010, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns)
found->	vendor=0x8086, dev=0x2916, revid=0x02
	domain=0, bus=0, slot=31, func=0
	class=06-01-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0107, statreg=0x0210, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found->	vendor=0x8086, dev=0x2922, revid=0x02
	domain=0, bus=0, slot=31, func=2
	class=01-06-01, hdrtype=0x00, mfdev=0
	cmdreg=0x0007, statreg=0x02b0, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=11
	powerspec 3  supports D0 D3  current D0
	MSI supports 16 messages
	map[10]: type I/O Port, range 32, base 0x2428, size  3, enabled
	map[14]: type I/O Port, range 32, base 0x243c, size  2, enabled
	map[18]: type I/O Port, range 32, base 0x2420, size  3, enabled
	map[1c]: type I/O Port, range 32, base 0x2438, size  2, enabled
	map[20]: type I/O Port, range 32, base 0x2020, size  5, enabled
	map[24]: type Memory, range 32, base 0xe0425000, size 11, enabled
pcib0: matched entry for 0.31.INTA
pcib0: slot 31 INTA hardwired to IRQ 21
found->	vendor=0x8086, dev=0x2930, revid=0x02
	domain=0, bus=0, slot=31, func=3
	class=0c-05-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0003, statreg=0x0280, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=b, irq=10
	map[10]: type Memory, range 64, base 0xe0426000, size  8, enabled
	map[20]: type I/O Port, range 32, base 0x2000, size  5, enabled
pcib0: matched entry for 0.31.INTB
pcib0: slot 31 INTB hardwired to IRQ 18
vgapci0: <VGA-compatible display> port 0x2430-0x2437 mem 0xe0380000-0xe03fffff,0xd0000000-0xdfffffff,0xe0200000-0xe02fffff irq 16 at device 2.0 on pci0
agp0: <Intel G33 SVGA controller> on vgapci0
vgapci0: Reserved 0x10000000 bytes for rid 0x18 type 3 at 0xd0000000
vgapci0: Reserved 0x80000 bytes for rid 0x10 type 3 at 0xe0380000
vgapci0: Reserved 0x100000 bytes for rid 0x1c type 3 at 0xe0200000
agp0: detected 7164k stolen memory
agp0: aperture size is 256M
drm0: <Intel G33> on vgapci0
vgapci0: attempting to allocate 1 MSI vectors (1 supported)
msi: routing MSI IRQ 256 to local APIC 0 vector 50
vgapci0: using IRQ 256 for MSI
info: [drm] MSI enabled 1 message(s)
vgapci0: child drm0 requested pci_enable_busmaster
info: [drm] AGP at 0xd0000000 256MB
info: [drm] Initialized i915 1.6.0 20080730
vgapci1: <VGA-compatible display> mem 0xe0300000-0xe037ffff at device 2.1 on pci0
pci0: <simple comms> at device 3.0 (no driver attached)
em0: <Intel(R) PRO/1000 Network Connection 6.9.14> port 0x2400-0x241f mem 0xe0400000-0xe041ffff,0xe0424000-0xe0424fff irq 20 at device 25.0 on pci0
em0: Reserved 0x20000 bytes for rid 0x10 type 3 at 0xe0400000
em0: attempting to allocate 1 MSI vectors (1 supported)
msi: routing MSI IRQ 257 to local APIC 0 vector 51
em0: using IRQ 257 for MSI
em0: Using MSI interrupt
em0: Reserved 0x1000 bytes for rid 0x14 type 3 at 0xe0424000
em0: [FILTER]
em0: bpf attached
em0: Ethernet address: 00:1c:c0:82:21:ff
uhci0: <Intel 82801I (ICH9) USB controller> port 0x20e0-0x20ff irq 18 at device 26.0 on pci0
uhci0: Reserved 0x20 bytes for rid 0x20 type 4 at 0x20e0
ioapic0: routing intpin 18 (PCI IRQ 18) to lapic 0 vector 52
uhci0: [MPSAFE]
uhci0: [ITHREAD]
uhci0: LegSup = 0x0f10
usbus0: <Intel 82801I (ICH9) USB controller> on uhci0
uhci1: <Intel 82801I (ICH9) USB controller> port 0x20c0-0x20df irq 21 at device 26.1 on pci0
uhci1: Reserved 0x20 bytes for rid 0x20 type 4 at 0x20c0
ioapic0: routing intpin 21 (PCI IRQ 21) to lapic 0 vector 53
uhci1: [MPSAFE]
uhci1: [ITHREAD]
uhci1: LegSup = 0x0f10
usbus1: <Intel 82801I (ICH9) USB controller> on uhci1
uhci2: <Intel 82801I (ICH9) USB controller> port 0x20a0-0x20bf irq 17 at device 26.2 on pci0
uhci2: Reserved 0x20 bytes for rid 0x20 type 4 at 0x20a0
ioapic0: routing intpin 17 (PCI IRQ 17) to lapic 0 vector 54
uhci2: [MPSAFE]
uhci2: [ITHREAD]
uhci2: LegSup = 0x0f10
usbus2: <Intel 82801I (ICH9) USB controller> on uhci2
ehci0: <Intel 82801I (ICH9) USB 2.0 controller> mem 0xe0425c00-0xe0425fff irq 17 at device 26.7 on pci0
ehci0: Reserved 0x400 bytes for rid 0x10 type 3 at 0xe0425c00
ehci0: [MPSAFE]
ehci0: [ITHREAD]
usbus3: EHCI version 1.0
usbus3: <Intel 82801I (ICH9) USB 2.0 controller> on ehci0
pci0: <multimedia, HDA> at device 27.0 (no driver attached)
pcib1: <ACPI PCI-PCI bridge> at device 28.0 on pci0
pcib1:   domain            0
pcib1:   secondary bus     1
pcib1:   subordinate bus   1
pcib1:   I/O decode        0x0-0x0
pcib1:   no prefetched decode
pci1: <ACPI PCI bus> on pcib1
pci1: domain=0, physical bus=1
pcib2: <ACPI PCI-PCI bridge> at device 28.1 on pci0
pcib2:   domain            0
pcib2:   secondary bus     2
pcib2:   subordinate bus   2
pcib2:   I/O decode        0x0-0x0
pcib2:   no prefetched decode
pci2: <ACPI PCI bus> on pcib2
pci2: domain=0, physical bus=2
pcib3: <ACPI PCI-PCI bridge> at device 28.2 on pci0
pcib3:   domain            0
pcib3:   secondary bus     3
pcib3:   subordinate bus   3
pcib3:   I/O decode        0x1000-0x1fff
pcib3:   memory decode     0xe0100000-0xe01fffff
pcib3:   no prefetched decode
pci3: <ACPI PCI bus> on pcib3
pci3: domain=0, physical bus=3
found->	vendor=0x11ab, dev=0x6101, revid=0xb2
	domain=0, bus=3, slot=0, func=0
	class=01-01-8f, hdrtype=0x00, mfdev=0
	cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=10
	powerspec 2  supports D0 D1 D3  current D0
	MSI supports 1 message
	map[10]: type I/O Port, range 32, base 0x1018, size  3, enabled
pcib3: requested I/O range 0x1018-0x101f: in range
	map[14]: type I/O Port, range 32, base 0x1024, size  2, enabled
pcib3: requested I/O range 0x1024-0x1027: in range
	map[18]: type I/O Port, range 32, base 0x1010, size  3, enabled
pcib3: requested I/O range 0x1010-0x1017: in range
	map[1c]: type I/O Port, range 32, base 0x1020, size  2, enabled
pcib3: requested I/O range 0x1020-0x1023: in range
	map[20]: type I/O Port, range 32, base 0x1000, size  4, enabled
pcib3: requested I/O range 0x1000-0x100f: in range
	map[24]: type Memory, range 32, base 0xe0100000, size  9, enabled
pcib3: requested memory range 0xe0100000-0xe01001ff: good
pcib3: matched entry for 3.0.INTA
pcib3: slot 0 INTA hardwired to IRQ 18
atapci0: <Marvell 88SX6101 UDMA133 controller> port 0x1018-0x101f,0x1024-0x1027,0x1010-0x1017,0x1020-0x1023,0x1000-0x100f mem 0xe0100000-0xe01001ff irq 18 at device 0.0 on pci3
atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0x1000
atapci0: [MPSAFE]
atapci0: [ITHREAD]
ata2: <ATA channel 0> on atapci0
atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1018
atapci0: Reserved 0x4 bytes for rid 0x14 type 4 at 0x1024
ata2: reset tp1 mask=03 ostat0=60 ostat1=70
ata2: stat0=0x20 err=0x20 lsb=0x20 msb=0x20
ata2: stat1=0x30 err=0x30 lsb=0x30 msb=0x30
ata2: reset tp2 stat0=20 stat1=30 devices=0x0
ata2: [MPSAFE]
ata2: [ITHREAD]
pcib4: <ACPI PCI-PCI bridge> at device 28.3 on pci0
pcib4:   domain            0
pcib4:   secondary bus     4
pcib4:   subordinate bus   4
pcib4:   I/O decode        0x0-0x0
pcib4:   no prefetched decode
pci4: <ACPI PCI bus> on pcib4
pci4: domain=0, physical bus=4
pcib5: <ACPI PCI-PCI bridge> at device 28.4 on pci0
pcib5:   domain            0
pcib5:   secondary bus     5
pcib5:   subordinate bus   5
pcib5:   I/O decode        0x0-0x0
pcib5:   no prefetched decode
pci5: <ACPI PCI bus> on pcib5
pci5: domain=0, physical bus=5
uhci3: <Intel 82801I (ICH9) USB controller> port 0x2080-0x209f irq 23 at device 29.0 on pci0
uhci3: Reserved 0x20 bytes for rid 0x20 type 4 at 0x2080
ioapic0: routing intpin 23 (PCI IRQ 23) to lapic 0 vector 55
uhci3: [MPSAFE]
uhci3: [ITHREAD]
uhci3: LegSup = 0x0f10
usbus4: <Intel 82801I (ICH9) USB controller> on uhci3
uhci4: <Intel 82801I (ICH9) USB controller> port 0x2060-0x207f irq 19 at device 29.1 on pci0
uhci4: Reserved 0x20 bytes for rid 0x20 type 4 at 0x2060
ioapic0: routing intpin 19 (PCI IRQ 19) to lapic 0 vector 56
uhci4: [MPSAFE]
uhci4: [ITHREAD]
uhci4: LegSup = 0x0f10
usbus5: <Intel 82801I (ICH9) USB controller> on uhci4
uhci5: <Intel 82801I (ICH9) USB controller> port 0x2040-0x205f irq 18 at device 29.2 on pci0
uhci5: Reserved 0x20 bytes for rid 0x20 type 4 at 0x2040
uhci5: [MPSAFE]
uhci5: [ITHREAD]
uhci5: LegSup = 0x0f10
usbus6: <Intel 82801I (ICH9) USB controller> on uhci5
ehci1: <Intel 82801I (ICH9) USB 2.0 controller> mem 0xe0425800-0xe0425bff irq 23 at device 29.7 on pci0
ehci1: Reserved 0x400 bytes for rid 0x10 type 3 at 0xe0425800
ehci1: [MPSAFE]
ehci1: [ITHREAD]
usbus7: EHCI version 1.0
usbus7: <Intel 82801I (ICH9) USB 2.0 controller> on ehci1
pcib6: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pcib6:   domain            0
pcib6:   secondary bus     6
pcib6:   subordinate bus   6
pcib6:   I/O decode        0xf000-0xfff
pcib6:   memory decode     0xe0000000-0xe00fffff
pcib6:   no prefetched decode
pcib6:   Subtractively decoded bridge.
pci6: <ACPI PCI bus> on pcib6
pci6: domain=0, physical bus=6
found->	vendor=0x11c1, dev=0x5811, revid=0x70
	domain=0, bus=6, slot=3, func=0
	class=0c-00-10, hdrtype=0x00, mfdev=0
	cmdreg=0x0216, statreg=0x0290, cachelnsz=16 (dwords)
	lattimer=0x20 (960 ns), mingnt=0x0c (3000 ns), maxlat=0x18 (6000 ns)
	intpin=a, irq=11
	powerspec 2  supports D0 D1 D2 D3  current D0
	map[10]: type Memory, range 32, base 0xe0000000, size 12, enabled
pcib6: requested memory range 0xe0000000-0xe0000fff: good
pcib6: matched entry for 6.3.INTA
pcib6: slot 3 INTA hardwired to IRQ 19
fwohci0: <Lucent FW322/323> mem 0xe0000000-0xe0000fff irq 19 at device 3.0 on pci6
fwohci0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xe0000000
fwohci0: [MPSAFE]
fwohci0: [ITHREAD]
fwohci0: OHCI version 1.0 (ROM=0)
fwohci0: No. of Isochronous channels is 8.
fwohci0: EUI64 00:90:27:00:02:27:89:ff
fwohci0: Phy 1394a available S400, 2 ports.
fwohci0: Link S400, max_rec 2048 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
sbp0: <SBP-2/SCSI over FireWire> on firewire0
fwohci0: Initiate bus reset
fwohci0: fwohci_intr_core: BUS reset
fwohci0: fwohci_intr_core: node_id=0x00000000, SelfID Count=1, CYCLEMASTER mode
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
ahci0: <AHCI controller> port 0x2428-0x242f,0x243c-0x243f,0x2420-0x2427,0x2438-0x243b,0x2020-0x203f mem 0xe0425000-0xe04257ff irq 21 at device 31.2 on pci0
ahci0: Reserved 0x800 bytes for rid 0x24 type 3 at 0xe0425000
ahci0: attempting to allocate 1 MSI vectors (16 supported)
msi: routing MSI IRQ 258 to local APIC 0 vector 64
ahci0: using IRQ 258 for MSI
ahci0: [MPSAFE]
ahci0: [ITHREAD]
ahci0: AHCI v1.20 with 6 3Gbps ports, Port Multiplier supported
ahci0: Caps: 64bit NCQ SNTF AL CLO 3Gbps PM PMD SSC PSC 32cmd CCC EM 6ports
ahcich0: <AHCI channel> at channel 0 on ahci0
ahcich0: [MPSAFE]
ahcich0: [ITHREAD]
ahcich1: <AHCI channel> at channel 1 on ahci0
ahcich1: [MPSAFE]
ahcich1: [ITHREAD]
ahcich2: <AHCI channel> at channel 2 on ahci0
ahcich2: [MPSAFE]
ahcich2: [ITHREAD]
ahcich3: <AHCI channel> at channel 3 on ahci0
ahcich3: [MPSAFE]
ahcich3: [ITHREAD]
ahcich4: <AHCI channel> at channel 4 on ahci0
ahcich4: [MPSAFE]
ahcich4: [ITHREAD]
ahcich5: <AHCI channel> at channel 5 on ahci0
ahcich5: [MPSAFE]
ahcich5: [ITHREAD]
ichsmb0: <SMBus controller> port 0x2000-0x201f mem 0xe0426000-0xe04260ff irq 18 at device 31.3 on pci0
ichsmb0: Reserved 0x20 bytes for rid 0x20 type 4 at 0x2000
ichsmb0: [MPSAFE]
ichsmb0: [ITHREAD]
smbus0: <System Management Bus> on ichsmb0
smb0: <SMBus generic I/O> on smbus0
atrtc0: <AT realtime clock> port 0x70-0x71,0x74-0x77 irq 8 on acpi0
atrtc0: registered as a time-of-day clock (resolution 1000000us)
cpu0: <ACPI CPU> on acpi0
coretemp0: <CPU On-Die Thermal Sensors> on cpu0
est0: <Enhanced SpeedStep Frequency Control> on cpu0
est0: Invalid id16 (set, cur) = (2331, 2587)
est0: Invalid freq 2394, ignored.
est0: Invalid id16 (set, cur) = (2075, 2587)
est0: Invalid freq 2128, ignored.
est0: Invalid id16 (set, cur) = (1819, 2587)
est0: Invalid freq 1862, ignored.
est0: Invalid id16 (set, cur) = (1562, 2587)
est0: Invalid freq 1596, ignored.
p4tcc0: <CPU Frequency Thermal Control> on cpu0
cpu1: <ACPI CPU> on acpi0
coretemp1: <CPU On-Die Thermal Sensors> on cpu1
est1: <Enhanced SpeedStep Frequency Control> on cpu1
est1: Invalid id16 (set, cur) = (2331, 2587)
est1: Invalid freq 2394, ignored.
est1: Invalid id16 (set, cur) = (2075, 2587)
est1: Invalid freq 2128, ignored.
est1: Invalid id16 (set, cur) = (1819, 2587)
est1: Invalid freq 1862, ignored.
est1: Invalid id16 (set, cur) = (1562, 2587)
est1: Invalid freq 1596, ignored.
p4tcc1: <CPU Frequency Thermal Control> on cpu1
isab0: found ICH9 or equivalent chipset: Intel ICH9R watchdog timer
isa_probe_children: disabling PnP devices
ichwd0: <Intel ICH9R watchdog timer> on isa0
isab0: found ICH9 or equivalent chipset: Intel ICH9R watchdog timer
ichwd0: Intel ICH9R watchdog timer (ICH9 or equivalent)
ichwd0: timer disabled
isa_probe_children: probing non-PnP devices
sc0: <System console> on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd0, terminal emulator: scteken (teken terminal)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
isa_probe_children: probing PnP devices
Device configuration finished.
Reducing kern.maxvnodes 253574 -> 100000
linprocfs registered
procfs registered
WARNING: ZFS is considered to be an experimental feature in FreeBSD.
lapic: Divisor 2, Frequency 133728721 hz
Timecounter "TSC" frequency 2674574190 Hz quality -100
Timecounters tick every 1.000 msec
Linux ELF exec handler installed
ipfw2 initialized, divert enabled, nat loadable, rule-based forwarding enabled, default to deny, logging disabled
lo0: bpf attached
firewire0: 1 nodes, maxhop <= 0 cable IRM irm(0)  (me) 
firewire0: bus manager 0 
Waiting 5 seconds for SCSI devices to settle
ahcich0: AHCI reset...
ahcich0: hardware reset ...
ahcich0: SATA connect time=0ms status=00000123
ahcich0: ready wait time=47ms
ahcich0: AHCI reset done: devices=00000001
ahcich1: AHCI reset...
ahcich1: hardware reset ...
ahcich1: SATA connect timeout status=00000000
ahcich1: AHCI reset done: phy reset found no device
ahcich2: AHCI reset...
ahcich2: hardware reset ...
ahcich2: SATA connect time=0ms status=00000123
ahcich2: ready wait time=1ms
ahcich2: AHCI reset done: devices=00000001
ahcich3: AHCI reset...
ahcich3: hardware reset ...
ahcich3: SATA connect timeout status=00000000
ahcich3: AHCI reset done: phy reset found no device
ahcich4: AHCI reset...
ahcich4: hardware reset ...
ahcich4: SATA connect time=0ms status=00000113
ahcich4: ready wait time=1ms
ahcich4: AHCI reset done: devices=00000001
ahcich5: AHCI reset...
ahcich5: hardware reset ...
ahcich5: SATA connect time=0ms status=00000123
ahcich5: ready wait time=1ms
ahcich5: AHCI reset done: devices=00000001
ata2: Identifying devices: 00000000
ata2: New devices: 00000000
usbus0: 12Mbps Full Speed USB v1.0
usbus1: 12Mbps Full Speed USB v1.0
usbus2: 12Mbps Full Speed USB v1.0
usbus3: 480Mbps High Speed USB v2.0
usbus4: 12Mbps Full Speed USB v1.0
usbus5: 12Mbps Full Speed USB v1.0
usbus6: 12Mbps Full Speed USB v1.0
usbus7: 480Mbps High Speed USB v2.0
ZFS NOTICE: system has less than 4GB and prefetch enable is not set... disabling.
ZFS filesystem version 13
ZFS storage pool version 13
ugen0.1: <Intel> at usbus0
uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
ugen1.1: <Intel> at usbus1
uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
ugen2.1: <Intel> at usbus2
uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
ugen3.1: <Intel> at usbus3
uhub3: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3
ugen4.1: <Intel> at usbus4
uhub4: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4
ugen5.1: <Intel> at usbus5
uhub5: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus5
ugen6.1: <Intel> at usbus6
uhub6: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus6
ugen7.1: <Intel> at usbus7
uhub7: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus7
uhub0: 2 ports with 2 removable, self powered
uhub1: 2 ports with 2 removable, self powered
uhub2: 2 ports with 2 removable, self powered
uhub4: 2 ports with 2 removable, self powered
uhub5: 2 ports with 2 removable, self powered
uhub6: 2 ports with 2 removable, self powered
uhub3: 6 ports with 6 removable, self powered
uhub7: 6 ports with 6 removable, self powered
(probe0:sbp0:0:0:0): error 22
(probe0:sbp0:0:0:0): Unretryable Error
(probe1:sbp0:0:1:0): error 22
(probe1:sbp0:0:1:0): Unretryable Error
(probe2:sbp0:0:2:0): error 22
(probe2:sbp0:0:2:0): Unretryable Error
(probe3:sbp0:0:3:0): error 22
(probe3:sbp0:0:3:0): Unretryable Error
(probe4:sbp0:0:4:0): error 22
(probe4:sbp0:0:4:0): Unretryable Error
(probe5:sbp0:0:5:0): error 22
(probe5:sbp0:0:5:0): Unretryable Error
(probe6:sbp0:0:6:0): error 22
(probe6:sbp0:0:6:0): Unretryable Error
ugen2.2: <Logitech> at usbus2
ugen6.2: <CHESEN> at usbus6
ukbd1: <CHESEN USB Keyboard, class 0/0, rev 1.10/1.10, addr 2> on usbus6
ums0: <Logitech USB-PS/2 Optical Mouse, class 0/0, rev 2.00/24.30, addr 2> on usbus2
kbd: new array size 4
kbd1 at ukbd1
kbd1: ukbd1, generic (0), config:0x0, flags:0x3d0000
ums0: 8 buttons and [XYZ] coordinates ID=0
uhid0: <CHESEN USB Keyboard, class 0/0, rev 1.10/1.10, addr 2> on usbus6
(aprobe0:ahcich0:0:15:0): SIGNATURE: 0000
(aprobe0:ahcich0:0:0:0): SIGNATURE: 0000
(aprobe2:ahcich2:0:15:0): SIGNATURE: 0000
(aprobe0:ahcich2:0:0:0): SIGNATURE: 0000
(aprobe4:ahcich4:0:15:0): SIGNATURE: eb14
(aprobe0:ahcich4:0:0:0): SIGNATURE: eb14
(aprobe5:ahcich5:0:15:0): SIGNATURE: 0000
(aprobe0:ahcich5:0:0:0): SIGNATURE: 0000
ada0 at ahcich0 bus 0 target 0 lun 0
ada0: <Hitachi HDP725050GLA360 GM4OA52A> ATA/ATAPI-8 SATA 2.x device
ada0: Serial Number GEA534RF0TK35A
ada0: 300.000MB/s transfers
ada0: 476940MB (976773168 512 byte sectors: 16H 63S/T 16383C)
ada0: Native Command Queueing enabled
ada1 at ahcich2 bus 0 target 0 lun 0
ada1: <WDC WD5000AAKS-00A7B2 01.03B01> ATA/ATAPI-8 SATA 2.x device
ada1: Serial Number WD-WMASY6905909
ada1: 300.000MB/s transfers
ada1: 476940MB (976773168 512 byte sectors: 16H 63S/T 16383C)
ada1: Native Command Queueing enabled
ada2 at ahcich5 bus 0 target 0 lun 0
ada2: <ST3500410AS CC34> ATA/ATAPI-8 SATA 2.x device
ada2: Serial Number 5VM0NB43
ada2: 300.000MB/s transfers
ada2: 476940MB (976773168 512 byte sectors: 16H 63S/T 16383C)
ada2: Native Command Queueing enabled
pass0 at ahcich0 bus 0 target 0 lun 0
pass0: <Hitachi HDP725050GLA360 GM4OA52A> ATA/ATAPI-8 SATA 2.x device
pass0: Serial Number GEA534RF0TK35A
pass0: 300.000MB/s transfers
pass1 at ahcich2 bus 0 target 0 lun 0
pass1: <WDC WD5000AAKS-00A7B2 01.03B01> ATA/ATAPI-8 SATA 2.x device
pass1: Serial Number WD-WMASY6905909
pass1: 300.000MB/s transfers
pass2 at ahcich4 bus 0 target 0 lun 0
pass2: <TSSTcorp CDDVDW SH-S203P SB00> Removable CD-ROM SCSI-0 device 
pass2: 150.000MB/s transfers
pass3 at ahcich5 bus 0 target 0 lun 0
pass3: <ST3500410AS CC34> ATA/ATAPI-8 SATA 2.x device
pass3: Serial Number 5VM0NB43
pass3: 300.000MB/s transfers
GEOM: new disk ada0
GEOM: new disk ada1(cd0:ahcich4:0:0:0): Retrying Command

GEOM: new disk ada2(cd0:ahcich4:0:0:0): error 6
(cd0:ahcich4:0:0:0): Unretryable Error
cd0 at ahcich4 bus 0 target 0 lun 0
cd0: <TSSTcorp CDDVDW SH-S203P SB00> Removable CD-ROM SCSI-0 device 
cd0: 150.000MB/s transfers
cd0: Attempt to query device size failed: UNIT ATTENTION, Power on, reset, or bus device reset occurred

GEOM: new disk cd0
SMP: AP CPU #1 Launched!
cpu1 AP:
     ID: 0x01000000   VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff
  lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
  timer: 0x000200ef therm: 0x00010000 err: 0x00010000 pcm: 0x00010000
ioapic0: routing intpin 17 (PCI IRQ 17) to lapic 1 vector 48
ioapic0: routing intpin 19 (PCI IRQ 19) to lapic 1 vector 49
ioapic0: routing intpin 21 (PCI IRQ 21) to lapic 1 vector 50
msi: Assigning MSI IRQ 257 to local APIC 1 vector 51
(cd0:ahcich4:0:0:0): Retrying Command
(cd0:ahcich4:0:0:0): error 6
(cd0:ahcich4:0:0:0): Unretryable Error
(cd0:ahcich4:0:0:0): Retrying Command
(cd0:ahcich4:0:0:0): error 6
(cd0:ahcich4:0:0:0): Unretryable Error
Trying to mount root from zfs:pond/ROOT/20090729
ct_to_ts([2009-07-30 12:43:43]) = 1248957823.000000000
start_init: trying /sbin/init
ichwd0: timer enabled
ichwd0: timeout set to 28 ticks
ichwd0: timer reloaded
ichwd0: timer reloaded
em0: Link is up 100 Mbps Full Duplex
net0: link state changed to UP
ichwd0: timer reloaded
ichwd0: timer reloaded
ichwd0: timer reloaded
ichwd0: timer reloaded
ichwd0: timer reloaded
ichwd0: timer reloaded
ichwd0: timer reloaded
ts_to_ct(1248957834.588336418) = [2009-07-30 12:43:54]