Copyright (c) 1992-2007 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 7.0-CURRENT #3: Tue Oct 9 10:00:41 UTC 2007 avatar@aspire5583:/usr/obj/usr/src/sys/GENERIC WARNING: WITNESS option enabled, expect reduced performance. Preloaded elf kernel "/boot/kernel/kernel" at 0xc0ddf000. Preloaded elf module "/boot/kernel/zfs.ko" at 0xc0ddf23c. Preloaded /boot/zfs/zpool.cache "/boot/zfs/zpool.cache" at 0xc0ddf2e4. Calibrating clock(s) ... i8254 clock: 1193180 Hz CLK_USE_I8254_CALIBRATION not specified - using default frequency Timecounter "i8254" frequency 1193182 Hz quality 0 Calibrating TSC clock ... TSC clock: 1666795610 Hz CPU: Intel(R) Core(TM)2 CPU T5500 @ 1.66GHz (1666.80-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x6f6 Stepping = 6 Features=0xbfebfbff Features2=0xe39d AMD Features=0x20100000 AMD Features2=0x1 Cores per package: 2 Instruction TLB: 4 KB Pages, 4-way set associative, 128 entries 2nd-level cache: 2-MB, 8-way set associative, 64-byte line size 1st-level instruction cache: 32 KB, 8-way set associative, 64 byte line size 1st-level data cache: 32 KB, 8-way set associative, 64 byte line size L2 cache: 2048 kbytes, 8-way associative, 64 bytes/line real memory = 1072234496 (1022 MB) Physical memory chunk(s): 0x0000000000001000 - 0x000000000009cfff, 638976 bytes (156 pages) 0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages) 0x0000000001028000 - 0x000000003ec4dfff, 1036148736 bytes (252966 pages) avail memory = 1035665408 (987 MB) MP Configuration Table version 1.4 found at 0xc009e571 APIC: Using the MPTable enumerator. SMP: Added CPU 0 (BSP) SMP: Added CPU 1 (AP) MPTable: INTR: Adding local APIC 1 as a target FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs cpu0 (BSP): APIC ID: 0 cpu1 (AP): APIC ID: 1 bios32: Found BIOS32 Service Directory header at 0xc00f6620 bios32: Entry = 0xfd460 (c00fd460) Rev = 0 Len = 1 pcibios: PCI BIOS entry at 0xfd460+0x262 pnpbios: Found PnP BIOS data at 0xc00f66c0 pnpbios: Entry = f0000:acd3 Rev = 1.0 Other BIOS signatures found: ioapic0: Assuming intbase of 0 ioapic0: Routing external 8259A's -> intpin 0 ioapic0: Routing IRQ 0 -> intpin 2 lapic: Routing ExtINT -> LINT0 lapic: LINT0 trigger: edge lapic: LINT0 polarity: high lapic: Routing NMI -> LINT1 lapic: LINT1 trigger: edge lapic: LINT1 polarity: high ioapic0 irqs 0-23 on motherboard cpu0 BSP: ID: 0x00000000 VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff timer: 0x000100ef therm: 0x00010000 err: 0x00010000 pcm: 0x00010000 wlan_amrr: wlan: <802.11 Link Layer> ath_rate: version 1.2 random: nfslock: pseudo-device kbd: new array size 4 kbd1 at kbdmux0 mem: Pentium Pro MTRR support enabled io: null: ath_hal: 0.9.20.3 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413) rr232x: RocketRAID 232x controller driver v1.02 (Oct 5 2007 19:01:52) npx0: INT 16 interface cpu0 on motherboard est0: on cpu0 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr 6130a2506000a25 device_attach: est0 attach returned 6 p4tcc0: on cpu0 cpu1 on motherboard est1: on cpu1 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr 6130a2506000a25 device_attach: est1 attach returned 6 p4tcc1: on cpu1 pci_open(1): mode 1 addr port (0x0cf8) is 0x8000f920 pci_open(1a): mode1res=0x80000000 (0x80000000) pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=27a08086) pcibios: BIOS version 2.10 pcib0: pcibus 0 on motherboard pci0: on pcib0 pci0: domain=0, physical bus=0 found-> vendor=0x8086, dev=0x27a0, revid=0x03 domain=0, bus=0, slot=0, func=0 class=06-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0006, statreg=0x2090, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x27a1, revid=0x03 domain=0, bus=0, slot=1, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x18 (6000 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 powerspec 2 supports D0 D3 current D0 MSI supports 1 message pcib0: slot 1 INTA routed to irq 16 found-> vendor=0x8086, dev=0x27d8, revid=0x02 domain=0, bus=0, slot=27, func=0 class=04-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0006, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=10 powerspec 2 supports D0 D3 current D0 MSI supports 1 message, 64 bit map[10]: type Memory, range 64, base 0xd2500000, size 14, enabled pcib0: slot 27 INTA routed to irq 22 found-> vendor=0x8086, dev=0x27d0, revid=0x02 domain=0, bus=0, slot=28, func=0 class=06-04-00, hdrtype=0x01, mfdev=1 cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 powerspec 2 supports D0 D3 current D0 MSI supports 1 message pcib0: slot 28 INTA routed to irq 16 found-> vendor=0x8086, dev=0x27d2, revid=0x02 domain=0, bus=0, slot=28, func=1 class=06-04-00, hdrtype=0x01, mfdev=1 cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns) intpin=b, irq=11 powerspec 2 supports D0 D3 current D0 MSI supports 1 message pcib0: slot 28 INTB routed to irq 17 found-> vendor=0x8086, dev=0x27d4, revid=0x02 domain=0, bus=0, slot=28, func=2 class=06-04-00, hdrtype=0x01, mfdev=1 cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns) intpin=c, irq=10 powerspec 2 supports D0 D3 current D0 MSI supports 1 message pcib0: slot 28 INTC routed to irq 18 found-> vendor=0x8086, dev=0x27d6, revid=0x02 domain=0, bus=0, slot=28, func=3 class=06-04-00, hdrtype=0x01, mfdev=1 cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns) intpin=d, irq=10 powerspec 2 supports D0 D3 current D0 MSI supports 1 message pcib0: slot 28 INTD routed to irq 19 found-> vendor=0x8086, dev=0x27c8, revid=0x02 domain=0, bus=0, slot=29, func=0 class=0c-03-00, hdrtype=0x00, mfdev=1 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 map[20]: type I/O Port, range 32, base 0x1800, size 5, enabled pcib0: slot 29 INTA routed to irq 23 found-> vendor=0x8086, dev=0x27c9, revid=0x02 domain=0, bus=0, slot=29, func=1 class=0c-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=10 map[20]: type I/O Port, range 32, base 0x1820, size 5, enabled pcib0: slot 29 INTB routed to irq 19 found-> vendor=0x8086, dev=0x27ca, revid=0x02 domain=0, bus=0, slot=29, func=2 class=0c-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=c, irq=10 map[20]: type I/O Port, range 32, base 0x1840, size 5, enabled pcib0: slot 29 INTC routed to irq 18 found-> vendor=0x8086, dev=0x27cb, revid=0x02 domain=0, bus=0, slot=29, func=3 class=0c-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=d, irq=11 map[20]: type I/O Port, range 32, base 0x1860, size 5, enabled pcib0: slot 29 INTD routed to irq 16 found-> vendor=0x8086, dev=0x27cc, revid=0x02 domain=0, bus=0, slot=29, func=7 class=0c-03-20, hdrtype=0x00, mfdev=0 cmdreg=0x0006, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 powerspec 2 supports D0 D3 current D0 map[10]: type Memory, range 32, base 0xd2504000, size 10, enabled pcib0: slot 29 INTA routed to irq 23 found-> vendor=0x8086, dev=0x2448, revid=0xe2 domain=0, bus=0, slot=30, func=0 class=06-04-01, hdrtype=0x01, mfdev=0 cmdreg=0x0004, statreg=0x0010, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x27b9, revid=0x02 domain=0, bus=0, slot=31, func=0 class=06-01-00, hdrtype=0x00, mfdev=1 cmdreg=0x0007, statreg=0x0210, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x27df, revid=0x02 domain=0, bus=0, slot=31, func=1 class=01-01-8a, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=255 map[20]: type I/O Port, range 32, base 0x1880, size 4, enabled found-> vendor=0x8086, dev=0x27da, revid=0x02 domain=0, bus=0, slot=31, func=3 class=0c-05-00, hdrtype=0x00, mfdev=0 cmdreg=0x0001, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=10 map[20]: type I/O Port, range 32, base 0x18e0, size 5, enabled pcib0: slot 31 INTB routed to irq 19 pcib1: irq 16 at device 1.0 on pci0 pcib1: domain 0 pcib1: secondary bus 1 pcib1: subordinate bus 1 pcib1: I/O decode 0xf000-0xfff pcib1: memory decode 0xd0000000-0xd1ffffff pcib1: prefetched decode 0xc0000000-0xcfffffff pci1: on pcib1 pci1: domain=0, physical bus=1 found-> vendor=0x10de, dev=0x01d7, revid=0xa1 domain=0, bus=1, slot=0, func=0 class=03-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 powerspec 2 supports D0 D3 current D0 MSI supports 1 message, 64 bit map[10]: type Memory, range 32, base 0xd1000000, size 24, enabled pcib1: requested memory range 0xd1000000-0xd1ffffff: good map[14]: type Prefetchable Memory, range 64, base 0xc0000000, size 28, enabled pcib1: requested memory range 0xc0000000-0xcfffffff: good map[1c]: type Memory, range 64, base 0xd0000000, size 24, enabled pcib1: requested memory range 0xd0000000-0xd0ffffff: good pcib0: slot 1 INTA routed to irq 16 pcib1: slot 0 INTA is routed to irq 16 vgapci0: mem 0xd1000000-0xd1ffffff,0xc0000000-0xcfffffff,0xd0000000-0xd0ffffff irq 16 at device 0.0 on pci1 pci0: at device 27.0 (no driver attached) pcib2: irq 16 at device 28.0 on pci0 pcib2: domain 0 pcib2: secondary bus 2 pcib2: subordinate bus 2 pcib2: I/O decode 0x2000-0x2fff pcib2: memory decode 0xd2000000-0xd20fffff pcib2: no prefetched decode pci2: on pcib2 pci2: domain=0, physical bus=2 found-> vendor=0x11ab, dev=0x4352, revid=0x14 domain=0, bus=2, slot=0, func=0 class=02-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x4010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 powerspec 2 supports D0 D1 D2 D3 current D0 MSI supports 2 messages, 64 bit map[10]: type Memory, range 64, base 0xd2000000, size 14, enabled pcib2: requested memory range 0xd2000000-0xd2003fff: good map[18]: type I/O Port, range 32, base 0x2000, size 8, enabled pcib2: requested I/O range 0x2000-0x20ff: in range pcib2: slot 0 INTA routed to irq 16 mskc0: port 0x2000-0x20ff mem 0xd2000000-0xd2003fff irq 16 at device 0.0 on pci2 mskc0: Reserved 0x4000 bytes for rid 0x10 type 3 at 0xd2000000 mskc0: MSI count : 2 mskc0: attempting to allocate 2 MSI vectors (2 supported) msi: routing MSI IRQ 256 to vector 48 msi: routing MSI IRQ 257 to vector 49 mskc0: using IRQs 256-257 for MSI mskc0: RAM buffer size : 16KB mskc0: Port 0 : Rx Queue 10KB(0x00000000:0x000027ff) mskc0: Port 0 : Tx Queue 10KB(0x00002800:0x00004fff) msk0: on mskc0 msk0: bpf attached msk0: Ethernet address: 00:16:36:74:a9:af miibus0: on msk0 e1000phy0: PHY 0 on miibus0 e1000phy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto ukphy0: PHY 3 on miibus0 ukphy0: OUI 0x001000, model 0x0004, rev. 0 ukphy0: no media present ukphy1: PHY 6 on miibus0 ukphy1: OUI 0x004400, model 0x0011, rev. 0 ukphy1: no media present mskc0: [MPSAFE] mskc0: [FILTER] pcib3: irq 17 at device 28.1 on pci0 pcib3: domain 0 pcib3: secondary bus 3 pcib3: subordinate bus 3 pcib3: I/O decode 0xf000-0xfff pcib3: memory decode 0xd2100000-0xd21fffff pcib3: no prefetched decode pci3: on pcib3 pci3: domain=0, physical bus=3 found-> vendor=0x8086, dev=0x4222, revid=0x02 domain=0, bus=3, slot=0, func=0 class=02-80-00, hdrtype=0x00, mfdev=0 cmdreg=0x0006, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 powerspec 2 supports D0 D3 current D0 MSI supports 1 message, 64 bit map[10]: type Memory, range 32, base 0xd2100000, size 12, enabled pcib3: requested memory range 0xd2100000-0xd2100fff: good pcib0: slot 28 INTA routed to irq 16 pcib3: slot 0 INTA is routed to irq 16 pci3: at device 0.0 (no driver attached) pcib4: irq 18 at device 28.2 on pci0 pcib4: domain 0 pcib4: secondary bus 4 pcib4: subordinate bus 4 pcib4: I/O decode 0xf000-0xfff pcib4: no prefetched decode pci4: on pcib4 pci4: domain=0, physical bus=4 pcib5: irq 19 at device 28.3 on pci0 pcib5: domain 0 pcib5: secondary bus 5 pcib5: subordinate bus 5 pcib5: I/O decode 0xf000-0xfff pcib5: no prefetched decode pci5: on pcib5 pci5: domain=0, physical bus=5 uhci0: port 0x1800-0x181f irq 23 at device 29.0 on pci0 uhci0: Reserved 0x20 bytes for rid 0x20 type 4 at 0x1800 ioapic0: routing intpin 23 (PCI IRQ 23) to vector 50 uhci0: [GIANT-LOCKED] uhci0: [ITHREAD] usb0: on uhci0 usb0: USB revision 1.0 uhub0: on usb0 uhub0: 2 ports with 2 removable, self powered uhci1: port 0x1820-0x183f irq 19 at device 29.1 on pci0 uhci1: Reserved 0x20 bytes for rid 0x20 type 4 at 0x1820 ioapic0: routing intpin 19 (PCI IRQ 19) to vector 51 uhci1: [GIANT-LOCKED] uhci1: [ITHREAD] usb1: on uhci1 usb1: USB revision 1.0 uhub1: on usb1 uhub1: 2 ports with 2 removable, self powered uhci2: port 0x1840-0x185f irq 18 at device 29.2 on pci0 uhci2: Reserved 0x20 bytes for rid 0x20 type 4 at 0x1840 ioapic0: routing intpin 18 (PCI IRQ 18) to vector 52 uhci2: [GIANT-LOCKED] uhci2: [ITHREAD] usb2: on uhci2 usb2: USB revision 1.0 uhub2: on usb2 uhub2: 2 ports with 2 removable, self powered uhci3: port 0x1860-0x187f irq 16 at device 29.3 on pci0 uhci3: Reserved 0x20 bytes for rid 0x20 type 4 at 0x1860 ioapic0: routing intpin 16 (PCI IRQ 16) to vector 53 uhci3: [GIANT-LOCKED] uhci3: [ITHREAD] usb3: on uhci3 usb3: USB revision 1.0 uhub3: on usb3 uhub3: 2 ports with 2 removable, self powered ehci0: mem 0xd2504000-0xd25043ff irq 23 at device 29.7 on pci0 ehci0: Reserved 0x400 bytes for rid 0x10 type 3 at 0xd2504000 ehci0: [GIANT-LOCKED] ehci0: [ITHREAD] usb4: EHCI version 1.0 usb4: companion controllers, 2 ports each: usb0 usb1 usb2 usb3 usb4: on ehci0 usb4: USB revision 2.0 uhub4: on usb4 uhub4: 8 ports with 8 removable, self powered ugen0: on uhub4 pcib6: at device 30.0 on pci0 pcib6: domain 0 pcib6: secondary bus 10 pcib6: subordinate bus 11 pcib6: I/O decode 0x0-0x0 pcib6: no prefetched decode pcib6: Subtractively decoded bridge. pci10: on pcib6 pci10: domain=0, physical bus=10 found-> vendor=0x104c, dev=0x8039, revid=0x00 domain=0, bus=10, slot=9, func=0 class=06-07-00, hdrtype=0x02, mfdev=1 cmdreg=0x0007, statreg=0x0210, cachelnsz=16 (dwords) lattimer=0x31 (1470 ns), mingnt=0x44 (17000 ns), maxlat=0x03 (750 ns) intpin=a, irq=10 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type Memory, range 32, base 0xd2200000, size 12, enabled pcib6: requested memory range 0xd2200000-0xd2200fff: good pcib6: slot 9 INTA routed to irq 20 found-> vendor=0x104c, dev=0x803b, revid=0x00 domain=0, bus=10, slot=9, func=2 class=01-80-00, hdrtype=0x00, mfdev=1 cmdreg=0x0006, statreg=0x0210, cachelnsz=16 (dwords) lattimer=0x39 (1710 ns), mingnt=0x07 (1750 ns), maxlat=0x04 (1000 ns) intpin=a, irq=10 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type Memory, range 32, base 0xd2201000, size 12, enabled pcib6: requested memory range 0xd2201000-0xd2201fff: good pcib6: slot 9 INTA routed to irq 20 cbb0: mem 0xd2200000-0xd2200fff irq 20 at device 9.0 on pci10 cbb0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xd2200000 cardbus0: on cbb0 pccard0: <16-bit PCCard bus> on cbb0 ioapic0: routing intpin 20 (PCI IRQ 20) to vector 54 cbb0: [MPSAFE] cbb0: [ITHREAD] cbb0: PCI Configuration space: 0x00: 0x8039104c 0x02100007 0x06070000 0x00823110 0x10: 0xd2200000 0x020000a0 0x200b0b0a 0xfffff000 0x20: 0x00000000 0xfffff000 0x00000000 0xfffffffc 0x30: 0x00000000 0xfffffffc 0x00000000 0x07440114 0x40: 0x01101025 0x00000001 0x00000000 0x00000000 0x50: 0x00000000 0x00000000 0x00000000 0x00000000 0x60: 0x00000000 0x00000000 0x00000000 0x00000000 0x70: 0x00000000 0x00000000 0x00000000 0x00000000 0x80: 0x1844d060 0x02d80019 0x00190016 0x01321b22 0x90: 0x606602c0 0x00000000 0x00000000 0x00000000 0xa0: 0xfe120001 0x00c00000 0x00000000 0x00000000 0xb0: 0x00000000 0x00000000 0x00000000 0x00000000 0xc0: 0x00000000 0x00000000 0x00000000 0x00000000 0xd0: 0x00000000 0x00000000 0x00000000 0x00000000 0xe0: 0x00000000 0x00000000 0x00000000 0x00000000 0xf0: 0x504e151f 0x61001620 0x00000000 0x00000000 pci10: at device 9.2 (no driver attached) isab0: at device 31.0 on pci0 isa0: on isab0 atapci0: port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x1880-0x188f at device 31.1 on pci0 atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0x1880 ata0: on atapci0 atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0 atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6 ata0: reset tp1 mask=03 ostat0=50 ostat1=50 ata0: stat0=0x50 err=0x01 lsb=0x00 msb=0x00 ata0: stat1=0x10 err=0x01 lsb=0x14 msb=0xeb ata0: reset tp2 stat0=50 stat1=10 devices=0x9 ioapic0: routing intpin 14 (ISA IRQ 14) to vector 55 ata0: [MPSAFE] ata0: [ITHREAD] ata1: on atapci0 atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170 atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376 ata1: reset tp1 mask=03 ostat0=7f ostat1=7f ata1: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f ata1: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f ata1: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f ata1: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f ata1: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f ata1: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f ata1: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f ata1: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f ata1: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f ata1: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f ata1: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f ata1: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f ata1: stat1=0x7f err=0x7f lsb=0x7f msb=0x7f ata1: reset tp2 stat0=ff stat1=ff devices=0x0 ioapic0: routing intpin 15 (ISA IRQ 15) to vector 56 ata1: [MPSAFE] ata1: [ITHREAD] pci0: at device 31.3 (no driver attached) unknown: status reg test failed ff unknown: status reg test failed ff unknown: status reg test failed ff unknown: status reg test failed ff unknown: status reg test failed ff unknown: status reg test failed ff ex_isa_identify() ata: ata0 already exists; skipping it ata: ata1 already exists; skipping it pnp_identify: Trying Read_Port at 203 pnp_identify: Trying Read_Port at 243 pnp_identify: Trying Read_Port at 283 pnp_identify: Trying Read_Port at 2c3 pnp_identify: Trying Read_Port at 303 pnp_identify: Trying Read_Port at 343 pnp_identify: Trying Read_Port at 383 pnp_identify: Trying Read_Port at 3c3 PNP Identify complete pnpbios: 25 devices, largest 290 bytes PNP0c02: adding io range 0x10-0x1f, size=0x10, align=0x1 PNP0c02: adding io range 0x24-0x25, size=0x2, align=0x1 PNP0c02: adding io range 0x28-0x29, size=0x2, align=0x1 PNP0c02: adding io range 0x2c-0x2d, size=0x2, align=0x1 PNP0c02: adding io range 0x30-0x31, size=0x2, align=0x1 PNP0c02: adding io range 0x34-0x35, size=0x2, align=0x1 PNP0c02: adding io range 0x38-0x39, size=0x2, align=0x1 PNP0c02: adding io range 0x3c-0x3d, size=0x2, align=0x1 PNP0c02: adding io range 0x50-0x53, size=0x4, align=0x1 PNP0c02: adding io range 0x62-0x62, size=0x1, align=0x1 PNP0c02: adding io range 0x66-0x66, size=0x1, align=0x1 PNP0c02: adding io range 0x72-0x73, size=0x2, align=0x1 PNP0c02: adding io range 0x74-0x75, size=0x2, align=0x1 PNP0c02: adding io range 0x76-0x77, size=0x2, align=0x1 PNP0c02: adding io range 0x80-0x80, size=0x1, align=0x1 PNP0c02: adding io range 0x90-0x91, size=0x2, align=0x1 PNP0c02: adding io range 0x92-0x92, size=0x1, align=0x1 PNP0c02: adding io range 0x93-0x9f, size=0xd, align=0x1 PNP0c02: adding io range 0xa4-0xa5, size=0x2, align=0x1 PNP0c02: adding io range 0xa8-0xa9, size=0x2, align=0x1 PNP0c02: adding io range 0xac-0xad, size=0x2, align=0x1 PNP0c02: adding io range 0xb0-0xb1, size=0x2, align=0x1 PNP0c02: adding io range 0xb2-0xb3, size=0x2, align=0x1 PNP0c02: adding io range 0xb4-0xb5, size=0x2, align=0x1 PNP0c02: adding io range 0xb8-0xb9, size=0x2, align=0x1 PNP0c02: adding io range 0xbc-0xbd, size=0x2, align=0x1 PNP0c02: adding io range 0x680-0x6ff, size=0x80, align=0x1 PNP0c02: adding io range 0x1640-0x164f, size=0x10, align=0x1 PNP0c02: adding fixed memory32 range 0xe0000000-0xefffffff, size=0x10000000 PNP0c02: adding fixed memory32 range 0xfed14000-0xfed17fff, size=0x4000 PNP0c02: adding fixed memory32 range 0xfed18000-0xfed18fff, size=0x1000 PNP0c02: adding fixed memory32 range 0xfed19000-0xfed19fff, size=0x1000 pnpbios: handle 0 device ID PNP0c02 (020cd041) PNP0c01: adding fixed memory32 range 0xe4000-0xfffff, size=0x1c000 PNP0c01: adding fixed memory32 range 0x100000-0x3fffffff, size=0x3ff00000 pnpbios: handle 1 device ID PNP0c01 (010cd041) PNP0200: adding io range 0-0xf, size=0x10, align=0x1 PNP0200: adding io range 0x81-0x8f, size=0xf, align=0x1 PNP0200: adding io range 0xc0-0xdf, size=0x20, align=0x1 PNP0200: adding dma mask 0x10 pnpbios: handle 2 device ID PNP0200 (0002d041) PNP0100: adding io range 0x40-0x43, size=0x4, align=0x1 PNP0100: adding irq mask 0x1 pnpbios: handle 4 device ID PNP0100 (0001d041) PNP0b00: adding io range 0x70-0x71, size=0x2, align=0x1 PNP0b00: adding irq mask 0x100 pnpbios: handle 5 device ID PNP0b00 (000bd041) PNP0303: adding io range 0x60-0x60, size=0x1, align=0x1 PNP0303: adding io range 0x64-0x64, size=0x1, align=0x1 PNP0303: adding irq mask 0x2 pnpbios: handle 6 device ID PNP0303 (0303d041) PNP0c04: adding io range 0xf0-0xff, size=0x10, align=0x1 PNP0c04: adding irq mask 0x2000 pnpbios: handle 7 device ID PNP0c04 (040cd041) PNP0800: adding io range 0x61-0x61, size=0x1, align=0x1 pnpbios: handle 8 device ID PNP0800 (0008d041) PNP0c02: adding memory32 range 0x9e800-0x9ffff, size=0x1800, align=0x1800 pnpbios: handle 9 device ID PNP0c02 (020cd041) PNP0c02: adding fixed memory32 range 0xfee00000-0xfee00fff, size=0x1000 pnpbios: handle 10 device ID PNP0c02 (020cd041) PNP0c02: adding io range 0xfe00-0xfe01, size=0x2, align=0x1 pnpbios: handle 11 device ID PNP0c02 (020cd041) PNP0c02: adding memory32 range 0xdf800-0xdffff, size=0x800, align=0x800 pnpbios: handle 12 device ID PNP0c02 (020cd041) PNP0a03: adding io range 0xcf8-0xcff, size=0x8, align=0x1 pnpbios: handle 13 device ID PNP0a03 (030ad041) PNP0c02: adding io range 0x4d0-0x4d1, size=0x2, align=0x1 PNP0c02: adding io range 0x1000-0x105f, size=0x60, align=0x1 PNP0c02: adding io range 0x1060-0x107f, size=0x20, align=0x1 PNP0c02: adding io range 0x1180-0x11bf, size=0x40, align=0x1 PNP0c02: adding fixed memory32 range 0xfed00000-0xfed033ff, size=0x3400 PNP0c02: adding fixed memory32 range 0xfed20000-0xfed3ffff, size=0x20000 PNP0c02: adding fixed memory32 range 0xfed45000-0xfed8ffff, size=0x4b000 PNP0c02: adding fixed memory32 range 0xfef00000-0xfeffffff, size=0x100000 PNP0c02: adding fixed memory32 range 0xfed1c000-0xfed1ffff, size=0x4000 pnpbios: handle 14 device ID PNP0c02 (020cd041) PNP0c02: adding fixed memory32 range 0xfec00000-0xfec0ffff, size=0x10000 pnpbios: handle 15 device ID PNP0c02 (020cd041) PNP0c02: adding fixed memory32 range 0xfec10000-0xfec17fff, size=0x8000 pnpbios: handle 16 device ID PNP0c02 (020cd041) PNP0c02: adding fixed memory32 range 0xfec18000-0xfec1ffff, size=0x8000 pnpbios: handle 17 device ID PNP0c02 (020cd041) PNP0c02: adding fixed memory32 range 0xfec20000-0xfec27fff, size=0x8000 pnpbios: handle 18 device ID PNP0c02 (020cd041) PNP0c02: adding fixed memory32 range 0xfec28000-0xfec2ffff, size=0x8000 pnpbios: handle 19 device ID PNP0c02 (020cd041) PNP0c02: adding fixed memory32 range 0xfec30000-0xfec37fff, size=0x8000 pnpbios: handle 20 device ID PNP0c02 (020cd041) PNP0c02: adding fixed memory32 range 0xfec38000-0xfec3ffff, size=0x8000 pnpbios: handle 21 device ID PNP0c02 (020cd041) INT0800: adding fixed memory32 range 0xff000000-0xffffffff, size=0x1000000 pnpbios: handle 22 device ID INT0800 (0008d425) PNP0c02: adding fixed memory32 range 0xcee00-0xcefff, size=0x200 pnpbios: handle 23 device ID PNP0c02 (020cd041) PNP0f13: adding irq mask 0x1000 pnpbios: handle 24 device ID PNP0f13 (130fd041) sc: sc0 already exists; skipping it vga: vga0 already exists; skipping it isa_probe_children: disabling PnP devices isa_probe_children: probing non-PnP devices pmtimer0 on isa0 orm0: at iomem 0xcf000-0xcffff,0xdf800-0xdffff pnpid ORM0000 on isa0 adv0: not probed (disabled) aha0: not probed (disabled) aic0: not probed (disabled) atkbdc0: at port 0x60,0x64 on isa0 atkbd0: irq 1 on atkbdc0 atkbd: the current kbd controller command byte 0047 atkbd: keyboard ID 0x41ab (2) kbd0 at atkbd0 kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000 ioapic0: routing intpin 1 (ISA IRQ 1) to vector 57 atkbd0: [GIANT-LOCKED] atkbd0: [ITHREAD] psm0: current command byte:0047 psm0: irq 12 on atkbdc0 ioapic0: routing intpin 12 (ISA IRQ 12) to vector 58 psm0: [GIANT-LOCKED] psm0: [ITHREAD] psm0: model IntelliMouse Explorer, device ID 4-00, 5 buttons psm0: config:00000000, flags:00000008, packet size:4 psm0: syncmask:08, syncbits:00 bt0: not probed (disabled) cs0: not probed (disabled) ed0: not probed (disabled) fdc0 failed to probe at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 fe0: not probed (disabled) ie0: not probed (disabled) le0: not probed (disabled) ppc0: parallel port not found. ppc0: failed to probe at irq 7 on isa0 sc0: at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sc0: fb0, kbd1, terminal emulator: sc (syscons terminal) sio0: configured irq 4 not in bitmap of probed irqs 0 sio0: port may not be enabled sio0: irq maps: 0x4001 0x4001 0x4001 0x4001 sio0: probe failed test(s): 0 1 2 4 6 7 9 sio0: configured irq 4 not in bitmap of probed irqs 0 sio0: port may not be enabled sio0: irq maps: 0x4001 0x4001 0x4001 0x4001 sio0: probe failed test(s): 0 1 2 4 6 7 9 sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 8250 or not responding, console ioapic0: routing intpin 4 (ISA IRQ 4) to vector 59 sio0: [FILTER] sio1: configured irq 3 not in bitmap of probed irqs 0 sio1: port may not be enabled sio1: irq maps: 0x4001 0x4001 0x4001 0x4001 sio1: probe failed test(s): 0 1 2 4 6 7 9 sio1 failed to probe at port 0x2f8-0x2ff irq 3 on isa0 sio2: not probed (disabled) sio3: not probed (disabled) sn0: not probed (disabled) vga0: at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 vt0: not probed (disabled) isa_probe_children: probing PnP devices unknown: can't assign resources (memory) unknown: at iomem 0xe4000-0xfffff,0x100000-0x3fffffff pnpid PNP0c01 on isa0 unknown: can't assign resources (port) unknown: at port 0x60 pnpid PNP0303 on isa0 unknown: failed to probe at port 0x61 pnpid PNP0800 on isa0 unknown: can't assign resources (memory) unknown: at iomem 0x9e800-0x9ffff pnpid PNP0c02 on isa0 unknown: can't assign resources (memory) unknown: at iomem 0xfee00000-0xfee00fff pnpid PNP0c02 on isa0 unknown: can't assign resources (memory) unknown: at iomem 0xdf800-0xdffff pnpid PNP0c02 on isa0 unknown: can't assign resources (memory) unknown: at iomem 0xfec00000-0xfec0ffff pnpid PNP0c02 on isa0 unknown: can't assign resources (memory) unknown: pnpid INT0800 on isa0 unknown: can't assign resources (irq) unknown: at irq 12 pnpid PNP0f13 on isa0 ugen1: on uhub2 Device configuration finished. procfs registered WARNING: ZFS is considered to be an experimental feature in FreeBSD. lapic: Divisor 2, Frequency 83339785 hz Timecounter "TSC" frequency 1666795610 Hz quality -100 Timecounters tick every 1.000 msec lo0: bpf attached rr232x: no controller detected. ZFS filesystem version 6 ZFS storage pool version 6 ata0-slave: pio=PIO4 wdma=WDMA2 udma=UDMA33 cable=40 wire ata0-master: pio=PIO4 wdma=WDMA2 udma=UDMA100 cable=80 wire ad0: setting PIO4 on ICH7 chip ad0: DMA limited to UDMA33, controller found non-ATA66 cable ad0: setting UDMA33 on ICH7 chip ad0: 57231MB at ata0-master UDMA33 ad0: 117210240 sectors [116280C/16H/63S] 16 sectors/interrupt 1 depth queue GEOM: new disk ad0 ad0: Intel check1 failed ad0: Adaptec check1 failed ad0: LSI (v3) check1 failed ad0: LSI (v2) check1 failed ad0: FreeBSD check1 failed acd0: setting PIO4 on ICH7 chip acd0: setting UDMA33 on ICH7 chip acd0: DVDR drive at ata0 as slave acd0: read 4148KB/s (4134KB/s) write 4134KB/s (4133KB/s), 2048KB buffer, UDMA33 acd0: Reads: CDR, CDRW, CDDA stream, DVDROM, DVDR, DVDRAM, packet acd0: Writes: CDR, CDRW, DVDR, DVDRAM, test write, burnproof acd0: Audio: play, 256 volume levels acd0: Mechanism: ejectable tray, unlocked acd0: Medium: no/blank disc ATA PseudoRAID loaded SMP: AP CPU #1 Launched! cpu1 AP: ID: 0x01000000 VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff timer: 0x000200ef therm: 0x00010000 err: 0x00010000 pcm: 0x00010000 ioapic0: Assigning ISA IRQ 1 to local APIC 0 ioapic0: Assigning ISA IRQ 4 to local APIC 1 ioapic0: Assigning ISA IRQ 12 to local APIC 0 ioapic0: Assigning ISA IRQ 14 to local APIC 1 ioapic0: Assigning ISA IRQ 15 to local APIC 0 ioapic0: Assigning PCI IRQ 16 to local APIC 1 ioapic0: Assigning PCI IRQ 18 to local APIC 0 ioapic0: Assigning PCI IRQ 19 to local APIC 1 ioapic0: Assigning PCI IRQ 20 to local APIC 0 ioapic0: Assigning PCI IRQ 23 to local APIC 1 msi: Assigning MSI IRQ 256 to local APIC 0 WARNING: WITNESS option enabled, expect reduced performance. GEOM_LABEL: Label for provider ad0s5 is ntfs/DATA. GEOM_LABEL: Label for provider ad0s6 is msdosfs/BACKUP. GEOM_LABEL: Label for provider ad0s7 is ext2fs//. Trying to mount root from zfs:universe start_init: trying /sbin/init