---<<BOOT>>---
KDB: debugger backends: ddb
KDB: current backend: ddb
Copyright (c) 1992-2020 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 13.0-CURRENT #16: Mon Jun  8 23:30:37 CEST 2020
    andreast@wandquad1.andreas.nets:/usr/obj/usr/src/arm.armv7/sys/WANDQUAD arm
FreeBSD clang version 10.0.1 (git@github.com:llvm/llvm-project.git llvmorg-10.0.1-rc1-0-gf79cd71e145)
VT: init without driver.
CPU: ARM Cortex-A9 r2p10 (ECO: 0x00000000)
CPU Features: 
  Multiprocessing, Thumb2, Security, VMSAv7, Coherent Walk
Optional instructions: 
  UMULL, SMULL, SIMD(ext)
LoUU:2 LoC:2 LoUIS:2 
Cache level 1:
 32KB/32B 4-way data cache WB Read-Alloc Write-Alloc
 32KB/32B 4-way instruction cache Read-Alloc
real memory  = 2147483648 (2048 MB)
avail memory = 2090651648 (1993 MB)
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
random: unblocking device.
random: entropy device external interface
WARNING: Device "kbd" is Giant locked and may be deleted before FreeBSD 13.0.
kbd0 at kbdmux0
WARNING: Device "openfirm" is Giant locked and may be deleted before FreeBSD 13.0.
ofwbus0: <Open Firmware Device Tree>
simplebus0: <Flattened device tree simple bus> on ofwbus0
simplebus1: <Flattened device tree simple bus> mem 0x2000000-0x20fffff on simplebus0
simplebus2: <Flattened device tree simple bus> mem 0x2000000-0x203ffff on simplebus1
imx6_anatop0: <Freescale i.MX6 Analog PLLs and Power> mem 0x20c8000-0x20c8fff irq 47,48,49 on simplebus1
simplebus3: <Flattened device tree simple bus> mem 0x2100000-0x21fffff on simplebus0
ocotp0: <Freescale On-Chip One-Time-Programmable Memory> mem 0x21bc000-0x21bffff on simplebus3
ccm0: <Freescale i.MX6 Clock Control Module> mem 0x20c4000-0x20c7fff irq 45,46 on simplebus1
l2cache0: <PL310 L2 cache controller> mem 0xa02000-0xa02fff irq 11 on simplebus0
l2cache0: cannot allocate IRQ, not using interrupt
l2cache0: Part number: 0x3, release: 0x7
l2cache0: Warning: L2 Cache should not already be active; trying to de-activate and re-initialize...
l2cache0: L2 Cache enabled: 1024KB/32B 16 ways
imx_iomux0: <Freescale i.MX pin configuration> mem 0x20e0000-0x20e3fff on simplebus1
gic0: <ARM Generic Interrupt Controller> mem 0xa01000-0xa01fff,0xa00100-0xa001ff on simplebus0
gic0: pn 0x39, arch 0x1, rev 0x2, implementer 0x43b irqs 160
gpio0: <Freescale i.MX GPIO Controller> mem 0x209c000-0x209ffff irq 28,29 on simplebus1
gpiobus0: <OFW GPIO bus> on gpio0
gpio1: <Freescale i.MX GPIO Controller> mem 0x20a0000-0x20a3fff irq 30,31 on simplebus1
gpiobus1: <OFW GPIO bus> on gpio1
gpio2: <Freescale i.MX GPIO Controller> mem 0x20a4000-0x20a7fff irq 32,33 on simplebus1
gpiobus2: <OFW GPIO bus> on gpio2
gpio3: <Freescale i.MX GPIO Controller> mem 0x20a8000-0x20abfff irq 34,35 on simplebus1
gpiobus3: <OFW GPIO bus> on gpio3
gpio4: <Freescale i.MX GPIO Controller> mem 0x20ac000-0x20affff irq 36,37 on simplebus1
gpiobus4: <OFW GPIO bus> on gpio4
gpio5: <Freescale i.MX GPIO Controller> mem 0x20b0000-0x20b3fff irq 38,39 on simplebus1
gpiobus5: <OFW GPIO bus> on gpio5
gpio6: <Freescale i.MX GPIO Controller> mem 0x20b4000-0x20b7fff irq 40,41 on simplebus1
gpiobus6: <OFW GPIO bus> on gpio6
imx_wdog0: <Freescale i.MX Watchdog> mem 0x20bc000-0x20bffff irq 43 on simplebus1
imx_epit0: <i.MX EPIT timer> mem 0x20d0000-0x20d3fff irq 52 on simplebus1
Timecounter "EPIT" frequency 66000000 Hz quality 1000
mp_tmr0: <ARM MPCore Timers> mem 0xa00600-0xa0061f irq 10 on simplebus0
Event timer "MPCore" frequency 492000000 Hz quality 1000
usbphy0: <Freescale i.MX6 USB PHY> mem 0x20c9000-0x20c9fff irq 50 on simplebus1
usbphy1: <Freescale i.MX6 USB PHY> mem 0x20ca000-0x20cafff irq 51 on simplebus1
imx_usbmisc0: <i.MX USB Misc Control> mem 0x2184800-0x21849ff on simplebus3
hdmi0: <Freescale i.MX6 HDMI core> mem 0x120000-0x128fff irq 7 on simplebus0
uart0: <Freescale i.MX UART> mem 0x2020000-0x2023fff irq 66 on simplebus2
uart0: console (115200,n,8,1)
gpioc0: <GPIO controller> on gpio0
gpioc1: <GPIO controller> on gpio1
gpioc2: <GPIO controller> on gpio2
gpioc3: <GPIO controller> on gpio3
gpioc4: <GPIO controller> on gpio4
gpioc5: <GPIO controller> on gpio5
gpioc6: <GPIO controller> on gpio6
snvs0: <i.MX6 SNVS RTC> mem 0x20cc000-0x20cffff on simplebus1
snvs0: registered as a time-of-day clock, resolution 0.000030s
src0: <Freescale i.MX6 System Reset Controller> mem 0x20d8000-0x20dbfff irq 54,55 on simplebus1
ehci0: <Freescale i.MX integrated USB controller> mem 0x2184000-0x21841ff irq 73 on simplebus3
usbus0: EHCI version 1.0
usbus0: stop timeout
usbus0 on ehci0
ehci1: <Freescale i.MX integrated USB controller> mem 0x2184200-0x21843ff irq 74 on simplebus3
usbus1: EHCI version 1.0
usbus1 on ehci1
ffec0: <Freescale Gigabit Ethernet Controller> mem 0x2188000-0x218bfff irq 77,78 on simplebus3
miibus0: <MII bus> on ffec0
atphy0: <Atheros F1 10/100/1000 PHY> PHY 1 on miibus0
atphy0:  none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseSX-FDX, 1000baseT-FDX, 1000baseT-FDX-master, auto
ffec0: Ethernet address: 00:1f:7b:b4:14:13
sdhci_fsl0: <Freescale uSDHC controller> mem 0x2190000-0x2193fff irq 82 on simplebus3
sdhci_fsl1: <Freescale uSDHC controller> mem 0x2194000-0x2197fff irq 83 on simplebus3
sdhci_fsl2: <Freescale uSDHC controller> mem 0x2198000-0x219bfff irq 84 on simplebus3
mmc0: <MMC/SD bus> on sdhci_fsl2
imx_i2c0: <Freescale i.MX I2C> mem 0x21a0000-0x21a3fff irq 86 on simplebus3
imx_i2c1: <Freescale i.MX I2C> mem 0x21a4000-0x21a7fff irq 87 on simplebus3
uart1: <Freescale i.MX UART> mem 0x21ec000-0x21effff irq 96 on simplebus3
fb0: <Freescale IPU> mem 0x2400000-0x27fffff irq 13,14 on simplebus0
ahci0: <i.MX6 Integrated AHCI controller> mem 0x2200000-0x2203fff irq 15 on simplebus0
ahci0: AHCI v1.30 with 1 3Gbps ports, Port Multiplier supported
ahcich0: <AHCI channel> at channel 0 on ahci0
cpulist0: <Open Firmware CPU Group> on ofwbus0
cpu0: <Open Firmware CPU> on cpulist0
cpu1: <Open Firmware CPU> on cpulist0
cpu2: <Open Firmware CPU> on cpulist0
cpu3: <Open Firmware CPU> on cpulist0
cryptosoft0: <software crypto>
Timecounters tick every 1.000 msec
Obsolete code will be removed soon: random(9) is the obsolete Park-Miller LCG from 1988
usbus0: 480Mbps High Speed USB v2.0
usbus1: 480Mbps High Speed USB v2.0
ugen0.1: <Freescale EHCI root HUB> at usbus0
uhub0 on usbus0
uhub0: <Freescale EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0
ugen1.1: <Freescale EHCI root HUB> at usbus1
uhub1 on usbus1
uhub1: <Freescale EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1
mmcsd0: 4GB <SDHC SU04G 8.0 SN 704D424D MFG 09/2008 by 3 SD> at mmc0 50.0MHz/4bit/65535-block
iicbus0: <OFW I2C bus> on imx_i2c0
iic0: <I2C generic I/O> on iicbus0
hdmi0: HDMI controller 13:0a:a0:c1
iicbus1: <OFW I2C bus> on imx_i2c1
iic1: <I2C generic I/O> on iicbus1
iicbus1: <unknown card> at addr 0x14
iicbus1: <unknown card> at addr 0x78
Release APs
Trying to mount root from ufs:/dev/ufs/rootfs [rw]...
uhub0: 1 port with 1 removable, self powered
uhub1: 1 port with 1 removable, self powered
ugen1.2: <ICY BOX ICY BOX IB-366StU3+B> at usbus1
umass0 on uhub1
umass0: <ICY BOX ICY BOX IB-366StU3+B, class 0/0, rev 2.10/1.00, addr 2> on usbus1
umass0:  SCSI over Bulk-Only; quirks = 0x0100
umass0:1:0: Attached to scbus1
da0 at umass-sim0 bus 0 scbus1 target 0 lun 0
da0: <ICY BOX IB-366StU3+B 0> Fixed Direct Access SPC-4 SCSI device
da0: Serial Number 123456789012
da0: 40.000MB/s transfers
da0: 152587MB (312500000 512 byte sectors)
da0: quirks=0x2<NO_6_BYTE>
lo0: link state changed to UP
ffec0: link state changed to DOWN
ffec0: link state changed to UP
Security policy loaded: MAC/ntpd (mac_ntpd)
warning: total configured swap (1048576 pages) exceeds maximum recommended amount (1022784 pages).
warning: increase kern.maxswzone or reduce amount of swap.