tftpboot 0x80300000 kernel.elf preferred nic: eth0 eth0 PHY0 Down Speed :10 Half duplex eth0 PHY1 Down Speed :10 Half duplex eth0 PHY2 Down Speed :10 Half duplex eth0 PHY3 up Speed :1000 Full duplex eth0 PHY4 Down Speed :10 Half duplex switch prereq:0 Using eth0 device TFTP from server 192.168.1.70; our IP address is 192.168.1.1 Filename 'kernel.elf'. Load address: 0x80300000 Loading: Got ARP REPLY, set eth addr (3c:97:0e:df:c0:73) ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################# done Bytes transferred = 12162792 (b996e8 hex) NetBootFileXferSize= 00b996e8 (IPQ40xx) # go 0x80300200 ## Starting application at 0x80300200 ... ---<>--- ARM Debug Architecture disabled in kernel compilation. GDB: debug pw ý current port: uart KDB: debugger backends: ddb gdb KDB: current backend: ddb CPU(0) applied BP hardening: not necessary SMP: ncpu=4 Copyright (c) 1992-2021 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 14.0-CURRENT #255 ahc_20211119_add_ipq40xx_clock_pinmux-n250577-769b304fccf7-dirty: Sat Nov 27 22:04:02 PST 2021 adrian@gertrude:/usr/home/adrian/work/freebsd/head-embedded-arm/freebsd-obj/usr/home/adrian/work/freebsd/head-embedded-arm/freebsd-src/arm.armv7/sys/ASUS_AC1300 arm FreeBSD clang version 12.0.1 (git@github.com:llvm/llvm-project.git llvmorg-12.0.1-0-gfed41342a82f) WARNING: WITNESS option enabled, expect reduced performance. Preloaded elf kernel "kernel" at 0xc0ab4f34. CPU: ARM Cortex-A7 r0p5 (ECO: 0x00000000) CPU Features: Multiprocessing, Thumb2, Security, Virtualization, Generic Timer, VMSAv7, PXN, LPAE, Coherent Walk Optional instructions: SDIV/UDIV, UMULL, SMULL, SIMD(ext) LoUU:2 LoC:3 LoUIS:2 Cache level 1: 32KB/64B 4-way data cache WB Read-Alloc Write-Alloc 32KB/32B 2-way instruction cache Read-Alloc Cache level 2: 256KB/64B 8-way unified cache WB Read-Alloc Write-Alloc real memory = 134217728 (128 MB) avail memory = 114151424 (108 MB) Physical memory chunk(s): 0x80000000 - 0x87ffffff, 128 MB ( 32768 pages) Excluded memory regions: 0x80300000 - 0x80e4efff, 11 MB ( 2895 pages) NoAlloc 0x87e00000 - 0x87ffffff, 2 MB ( 512 pages) NoAlloc NoDump Static device mappings: 0x078af000 - 0x078affff mapped at VA 0xfffef000 0x004ab000 - 0x004abfff mapped at VA 0xfffee000 No PSCI/SMCCC call function found FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs random: no preloaded entropy cache arc4random: WARNING: initial seeding bypassed the cryptographic random device because it was not yet seeded and the knob 'bypass_before_seeding' was enabled. VIMAGE (virtualized network stack) enabled hostuuid: using 00000000-0000-0000-0000-000000000000 ULE: setup cpu 0 ULE: setup cpu 1 ULE: setup cpu 2 ULE: setup cpu 3 random: entropy device external interface mem: null: openfirm: crypto: ofwbus0: ofw_clkbus0: on ofwbus0 clk_fixed0: on ofw_clkbus0 clk_fixed1: on ofw_clkbus0 simplebus0: on ofwbus0 qcom_gcc0 mem 0x1800000-0x185ffff on simplebus0 qcom_gcc0: qcom_clk_rcg2_init: called qcom_gcc0: qcom_clk_rcg2_init: mux index 0 qcom_gcc0: qcom_clk_rcg2_init: called qcom_gcc0: qcom_clk_rcg2_init: mux index 0 qcom_gcc0: qcom_clk_rcg2_init: called qcom_gcc0: qcom_clk_rcg2_init: mux index 0 qcom_gcc0: qcom_clk_rcg2_init: called qcom_gcc0: qcom_clk_rcg2_init: mux index 0 qcom_gcc0: qcom_clk_rcg2_init: called qcom_gcc0: qcom_clk_rcg2_init: mux index 0 qcom_gcc0: qcom_clk_rcg2_init: called qcom_gcc0: qcom_clk_rcg2_init: mux index 0 qcom_gcc0: qcom_clk_rcg2_init: called qcom_gcc0: qcom_clk_rcg2_init: mux index 0 qcom_gcc0: qcom_clk_rcg2_init: called qcom_gcc0: qcom_clk_rcg2_init: mux index 0 qcom_gcc0: qcom_clk_rcg2_init: called qcom_gcc0: qcom_clk_rcg2_init: mux index 0 qcom_gcc0: qcom_clk_rcg2_init: called qcom_gcc0: qcom_clk_rcg2_init: mux index 0 qcom_gcc0: qcom_clk_rcg2_init: called qcom_gcc0: qcom_clk_rcg2_init: mux index 0 qcom_gcc0: qcom_clk_rcg2_init: called qcom_gcc0: qcom_clk_rcg2_init: mux index 1 qcom_gcc0: qcom_clk_rcg2_init: called qcom_gcc0: qcom_clk_rcg2_init: mux index 1 qcom_gcc0: qcom_clk_rcg2_init: called qcom_gcc0: qcom_clk_rcg2_init: mux index 1 qcom_gcc0: qcom_clk_rcg2_init: called qcom_gcc0: qcom_clk_rcg2_init: mux index 1 qcom_gcc0: qcom_clk_rcg2_init: called qcom_gcc0: qcom_clk_rcg2_init: mux index 1 qcom_gcc0: qcom_clk_rcg2_init: called qcom_gcc0: qcom_clk_rcg2_init: mux index 1 qcom_gcc0: qcom_clk_rcg2_init: called qcom_gcc0: qcom_clk_rcg2_init: mux index 1 CHECK: fepll freq=4000000000 CHECK: fepll200 freq=200000000 CHECK: ddrpll freq=5376000000 CHECK: ddrpllsdcc freq=192000000 qcom_gcc0: qcom_clk_apssdiv_recalc: called; cdiv=0x3, freq=5376000000 qcom_gcc0: qcom_clk_apssdiv_recalc: called; freq is 716800000 CHECK: ddrpllapss freq=716800000 CHECK: rcg2: audio_clk_src=48000000 CHECK: rcg2: blsp1_qup1_i2c_apps_clk_src=48000000 CHECK: rcg2: blsp1_qup2_i2c_apps_clk_src=48000000 CHECK: rcg2: blsp1_qup1_spi_apps_clk_src=24000000 CHECK: rcg2: blsp1_qup2_spi_apps_clk_src=24000000 CHECK: rcg2: blsp1_uart1_apps_clk_src=1843200 CHECK: rcg2: blsp1_uart2_apps_clk_src=48000000 CHECK: rcg2: gp1_clk_src=48000000 CHECK: rcg2: gp2_clk_src=48000000 CHECK: rcg2: gp3_clk_src=48000000 CHECK: rcg2: sdcc1_apps_clk_src=48000000 CHECK: rcg2: apps_clk_src=716800000 CHECK: rcg2: apps_ahb_clk_src=100000000 CHECK: rcg2: usb30_mock_utmi_clk_src=20000000 CHECK: rcg2: fephy_125m_dly_clk_src=125000000 CHECK: rcg2: wcss2g_clk_src=250000000 CHECK: rcg2: wcss5g_clk_src=250000000 CHECK: rcg2: gcc_pcnoc_ahb_clk_src=100000000 CHECK: branch2: gcc_audio_ahb_clk=100000000 CHECK: branch2: gcc_audio_pwm_clk=48000000 CHECK: branch2: gcc_blsp1_uart1_apps_clk=1843200 CHECK: branch2: gcc_blsp1_uart2_apps_clk=48000000 CHECK: branch2: gcc_gp1_clk=48000000 CHECK: branch2: gcc_gp2_clk=48000000 CHECK: branch2: gcc_gp3_clk=48000000 CHECK: branch2: gcc_apss_ahb_clk=100000000 CHECK: branch2: gcc_sdcc1_apps_clk=48000000 CHECK: branch2: pcnoc_clk_src=100000000 gic0: mem 0xb000000-0xb000fff,0xb002000-0xb002fff on simplebus0 simplebus0: no default resources for rid = 0, type = 1 gic0: pn 0x0, arch 0x2, rev 0x0, implementer 0x70 irqs 288 generic_timer0: irq 1,2,3,4 on ofwbus0 Timecounter "ARM MPCore Timecounter" frequency 48000000 Hz quality 1000 Event timer "ARM MPCore Eventtimer" frequency 48000000 Hz quality 1000 cpulist0: on ofwbus0 cpu0: on cpulist0 cpufreq_dt0: on cpu0 cpufreq_dt0: 48.000 Mhz (0 uV) cpufreq_dt0: 200.000 Mhz (0 uV) cpufreq_dt0: 500.000 Mhz (0 uV) cpufreq_dt0: 716.000 Mhz (0 uV) cpu1: on cpulist0 cpufreq_dt1: on cpu1 cpufreq_dt1: 48.000 Mhz (0 uV) cpufreq_dt1: 200.000 Mhz (0 uV) cpufreq_dt1: 500.000 Mhz (0 uV) cpufreq_dt1: 716.000 Mhz (0 uV) cpu2: on cpulist0 cpufreq_dt2: on cpu2 cpufreq_dt2: 48.000 Mhz (0 uV) cpufreq_dt2: 200.000 Mhz (0 uV) cpufreq_dt2: 500.000 Mhz (0 uV) cpufreq_dt2: 716.000 Mhz (0 uV) cpu3: on cpulist0 cpufreq_dt3: on cpu3 cpufreq_dt3: 48.000 Mhz (0 uV) cpufreq_dt3: 200.000 Mhz (0 uV) cpufreq_dt3: 500.000 Mhz (0 uV) cpufreq_dt3: 716.000 Mhz (0 uV) ofwbus0: compat operating-points-v2 (no driver attached) ofwbus0: irq 0 compat arm,cortex-a7-pmu (no driver attached) qcom_rnd0 mem 0x22000-0x2213f on simplebus0 qcom_rnd0: PRNG HW already enabled random: registering fast source Qualcomm Entropy Adapter simplebus0: mem 0x1000000-0x12fffff irq 5 compat qcom,ipq4019-pinctrl (no driver attached) simplebus0: mem 0x1948000-0x1948003 disabled compat qcom,vqmmc-ipq4019-regulator (no driver attached) simplebus0: mem 0x7824900-0x7824a1b,0x7824000-0x78247ff irq 6,7 disabled compat qcom,sdhci-msm-v4 (no driver attached) simplebus0: mem 0x7884000-0x78a6fff irq 8 compat qcom,bam-v1.7.0 (no driver attached) simplebus0: mem 0x78b5000-0x78b55ff irq 9 compat qcom,spi-qup-v2.2.1 (no driver attached) simplebus0: mem 0x78b6000-0x78b65ff irq 10 disabled compat qcom,spi-qup-v2.2.1 (no driver attached) simplebus0: mem 0x78b7000-0x78b75ff irq 11 disabled compat qcom,i2c-qup-v2.2.1 (no driver attached) simplebus0: mem 0x78b8000-0x78b85ff irq 12 disabled compat qcom,i2c-qup-v2.2.1 (no driver attached) simplebus0: mem 0x8e04000-0x8e23fff irq 13 compat qcom,bam-v1.7.0 (no driver attached) simplebus0: mem 0x8e3a000-0x8e3ffff compat qcom,crypto-v5.1 (no driver attached) simplebus0: mem 0xb088000-0xb088fff,0xb008000-0xb008fff compat qcom,kpss-acc-v2 (no driver attached) simplebus0: mem 0xb098000-0xb098fff,0xb008000-0xb008fff compat qcom,kpss-acc-v2 (no driver attached) simplebus0: mem 0xb0a8000-0xb0a8fff,0xb008000-0xb008fff compat qcom,kpss-acc-v2 (no driver attached) simplebus0: mem 0xb0b8000-0xb0b8fff,0xb008000-0xb008fff compat qcom,kpss-acc-v2 (no driver attached) simplebus0: mem 0xb089000-0xb089fff,0xb009000-0xb009fff compat qcom,saw2 (no driver attached) simplebus0: mem 0xb099000-0xb099fff,0xb009000-0xb009fff compat qcom,saw2 (no driver attached) simplebus0: mem 0xb0a9000-0xb0a9fff,0xb009000-0xb009fff compat qcom,saw2 (no driver attached) simplebus0: mem 0xb0b9000-0xb0b9fff,0xb009000-0xb009fff compat qcom,saw2 (no driver attached) simplebus0: mem 0xb012000-0xb012fff compat qcom,saw2 (no driver attached) uart0: mem 0x78af000-0x78af1ff irq 14 on simplebus0 uart0: console (-1,n,8,1) uart0: fast interrupt uart0: PPS capture mode: DCD simplebus0: mem 0x78b0000-0x78b01ff irq 15 disabled compat qcom,msm-uartdm-v1.4 (no driver attached) simplebus0: mem 0xb017000-0xb01703f compat qcom,kpss-wdt (no driver attached) simplebus0: mem 0x4ab000-0x4ab003 compat qcom,pshold (no driver attached) simplebus0: mem 0x40000000-0x40000f1c,0x40000f20-0x40000fc7,0x80000-0x81fff,0x40100000-0x40100fff irq 16 disabled type pci compat qcom,pcie-ipq4019 (no driver attached) simplebus0: mem 0x7984000-0x799dfff irq 17 disabled compat qcom,bam-v1.7.0 (no driver attached) simplebus0: mem 0x79b0000-0x79b0fff disabled compat qcom,ipq4019-nand (no driver attached) simplebus0: mem 0xa000000-0xa1fffff irq 18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34 compat qcom,ipq4019-wifi (no driver attached) simplebus0: mem 0xa800000-0xa9fffff irq 35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51 compat qcom,ipq4019-wifi (no driver attached) simplebus0: mem 0x90000-0x90063 compat qcom,ipq4019-mdio (no driver attached) simplebus0: mem 0x9a000-0x9a7ff compat qcom,usb-ss-ipq4019-phy (no driver attached) simplebus0: mem 0xa6000-0xa603f compat qcom,usb-hs-ipq4019-phy (no driver attached) simplebus0: mem 0x8af8800-0x8af88ff compat qcom,dwc3 (no driver attached) simplebus0: mem 0xa8000-0xa803f disabled compat qcom,usb-hs-ipq4019-phy (no driver attached) simplebus0: mem 0x60f8800-0x60f88ff disabled compat qcom,dwc3 (no driver attached) simplebus0: mem 0x1949000-0x19490ff compat qcom,tcsr (no driver attached) simplebus0: mem 0x194b000-0x194b0ff compat qcom,tcsr (no driver attached) simplebus0: mem 0x1953000-0x1953fff compat qcom,tcsr (no driver attached) simplebus0: mem 0x1957000-0x19570ff compat qcom,tcsr (no driver attached) ofwbus0: compat gpio-keys (no driver attached) ofwbus0: compat gpio-leds (no driver attached) crypto: assign cryptosoft0 driver id 0, flags 0x6000000 procfs registered Timecounters tick every 1.000 msec lo0: bpf attached IPsec: Initialized Security Association Processing. tcp_init: net.inet.tcp.tcbhashsize auto tuned to 1024 md0: Embedded image 4194304 bytes at 0xc05ff548 Release APs CPU(3) applied BP hardening: not necessary CPU(2) applied BP hardening: not necessary CPU(1) applied BP hardening: not necessary WARNING: WITNESS option enabled, expect reduced performance. regulator: shutting down unused regulators Trying to mount root from ufs:md0.uzip []... Warning: no time-of-day clock registered, system time will not be set accurately start_init: trying /sbin/init 2021-11-22T03:13:48.075381+00:00 - init 14 - - login_getclass: unknown class 'daemon' 2021-11-22T03:13:48.089239+00:00 - init 14 - - can't access /etc/rc: No such file or directory sh: cannot open /etc/rc: No such file or directory Enter full pathname of shell or RETURN for /bin/sh: Cannot read termcap database; using dumb terminal settings. #