nexus0
  efirtc0<EFI Realtime Clock>
  smbios0<System Management BIOS>
  cryptosoft0<software crypto>
  aesni0<AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS>
  ram0<System RAM>
      <I/O memory addresses>
          0x0-0x57fff
          0x59000-0x8bfff
          0x100000-0xcf9f8fff
          0xcfbfb000-0xda1b9fff
          0xdceff000-0xdcefffff
          0x100000000-0x41e5fffff
  apic0<APIC resources>
  acpi0<LENOVO TP-GM>
      <Interrupt request lines>
          0x9
      <I/O ports>
          0x10-0x1f
          0x24-0x25
          0x28-0x29
          0x2c-0x2d
          0x30-0x31
          0x34-0x35
          0x38-0x39
          0x3c-0x3d
          0x50-0x53
          0x72-0x77
          0x90-0x9f
          0xa4-0xa5
          0xa8-0xa9
          0xac-0xad
          0xb0-0xb5
          0xb8-0xb9
          0xbc-0xbd
          0x800-0x87f
          0x15e0-0x15ef
          0x1600-0x167f
          0x1800-0x187f
      <I/O memory addresses>
          0xc0000-0xc3fff
          0xc4000-0xc7fff
          0xc8000-0xcbfff
          0xcc000-0xcffff
          0xd0000-0xd3fff
          0xd4000-0xd7fff
          0xd8000-0xdbfff
          0xdc000-0xdffff
          0xe0000-0xe3fff
          0xe4000-0xe7fff
          0xe8000-0xebfff
          0xec000-0xeffff
          0xf0000-0xfffff
          0xf8000000-0xfbffffff
          0xfec00000-0xfed3ffff
          0xfed45000-0xfed4bfff
          0xfed4c000-0xffffffff
    acpi_ec0<Embedded Controller: GPE 0x11, ECDT> pnpinfo _HID=PNP0C09 _UID=0 _CID=none at handle=\_SB_.PCI0.LPC_.EC__
        <I/O ports>
            0x62
            0x66
    cpu0<ACPI CPU> pnpinfo _HID=none _UID=0 _CID=none at handle=\_PR_.CPU0
      acpi_perf0
      acpi_throttle0
      est0<Enhanced SpeedStep Frequency Control>
      p4tcc0
      cpufreq0<CPU frequency control>
    cpu1<ACPI CPU> pnpinfo _HID=none _UID=0 _CID=none at handle=\_PR_.CPU1
      acpi_perf1
      acpi_throttle1
      est1<Enhanced SpeedStep Frequency Control>
      p4tcc1
      cpufreq1<CPU frequency control>
    cpu2<ACPI CPU> pnpinfo _HID=none _UID=0 _CID=none at handle=\_PR_.CPU2
      acpi_perf2
      acpi_throttle2
      est2<Enhanced SpeedStep Frequency Control>
      p4tcc2
      cpufreq2<CPU frequency control>
    cpu3<ACPI CPU> pnpinfo _HID=none _UID=0 _CID=none at handle=\_PR_.CPU3
      acpi_perf3
      acpi_throttle3
      est3<Enhanced SpeedStep Frequency Control>
      p4tcc3
      cpufreq3<CPU frequency control>
    unknown pnpinfo _HID=none _UID=0 _CID=none at handle=\_PR_.CPU4
    unknown pnpinfo _HID=none _UID=0 _CID=none at handle=\_PR_.CPU5
    unknown pnpinfo _HID=none _UID=0 _CID=none at handle=\_PR_.CPU6
    unknown pnpinfo _HID=none _UID=0 _CID=none at handle=\_PR_.CPU7
    pci_link0<ACPI PCI Link LNKA> pnpinfo _HID=PNP0C0F _UID=1 _CID=none at handle=\_SB_.LNKA
    pci_link1<ACPI PCI Link LNKB> pnpinfo _HID=PNP0C0F _UID=2 _CID=none at handle=\_SB_.LNKB
    pci_link2<ACPI PCI Link LNKC> pnpinfo _HID=PNP0C0F _UID=3 _CID=none at handle=\_SB_.LNKC
    pci_link3<ACPI PCI Link LNKD> pnpinfo _HID=PNP0C0F _UID=4 _CID=none at handle=\_SB_.LNKD
    pci_link4<ACPI PCI Link LNKE> pnpinfo _HID=PNP0C0F _UID=5 _CID=none at handle=\_SB_.LNKE
    pci_link5<ACPI PCI Link LNKF> pnpinfo _HID=PNP0C0F _UID=6 _CID=none at handle=\_SB_.LNKF
    pci_link6<ACPI PCI Link LNKG> pnpinfo _HID=PNP0C0F _UID=7 _CID=none at handle=\_SB_.LNKG
    pci_link7<ACPI PCI Link LNKH> pnpinfo _HID=PNP0C0F _UID=8 _CID=none at handle=\_SB_.LNKH
    acpi_sysresource0<System Resource> pnpinfo _HID=PNP0C01 _UID=0 _CID=none at handle=\_SB_.MEM_
    acpi_lid0<Control Method Lid Switch> pnpinfo _HID=PNP0C0D _UID=0 _CID=none at handle=\_SB_.LID_
    acpi_button0<Sleep Button> pnpinfo _HID=PNP0C0E _UID=0 _CID=none at handle=\_SB_.SLPB
    pcib0<ACPI Host-PCI bridge> pnpinfo _HID=PNP0A08 _UID=0 _CID=PNP0A03 at handle=\_SB_.PCI0
        <I/O ports>
            0xcf8-0xcff
      pci0<ACPI PCI bus>
          <PCI domain 0 bus numbers>
              0
        hostb0<Host to PCI bridge> pnpinfo vendor=0x8086 device=0x0c04 subvendor=0x17aa subdevice=0x2210 class=0x060000 at slot=0 function=0 dbsf=pci0:0:0:0
        vgapci0<VGA-compatible display> pnpinfo vendor=0x8086 device=0x0416 subvendor=0x17aa subdevice=0x2210 class=0x030000 at slot=2 function=0 dbsf=pci0:0:2:0 handle=\_SB_.PCI0.VID_
            <Interrupt request lines>
                0x26
            <I/O ports>
                0x4000-0x403f
            <I/O memory addresses>
                0xe0000000-0xefffffff
                0xf0000000-0xf03fffff
          drmn0<drmn>
            drm128
            drm0
              drm1
                lkpi_iic6<LinuxKPI I2C>
                  iicbus6<Philips I2C bus>
                    iic6<I2C generic I/O> at addr=0
              drm2
              drm3
                lkpi_iic7<LinuxKPI I2C>
                  iicbus7<Philips I2C bus>
                    iic7<I2C generic I/O> at addr=0
              drm4
              drm5
                lkpi_iic8<LinuxKPI I2C>
                  iicbus8<Philips I2C bus>
                    iic8<I2C generic I/O> at addr=0
              drm6
            lkpi_iic0<LinuxKPI I2C>
              iicbus0<Philips I2C bus>
                iic0<I2C generic I/O> at addr=0
            lkpi_iic1<LinuxKPI I2C>
              iicbus1<Philips I2C bus>
                iic1<I2C generic I/O> at addr=0
            lkpi_iic2<LinuxKPI I2C>
              iicbus2<Philips I2C bus>
                iic2<I2C generic I/O> at addr=0
            lkpi_iic3<LinuxKPI I2C>
              iicbus3<Philips I2C bus>
                iic3<I2C generic I/O> at addr=0
            lkpi_iic4<LinuxKPI I2C>
              iicbus4<Philips I2C bus>
                iic4<I2C generic I/O> at addr=0
            lkpi_iic5<LinuxKPI I2C>
              iicbus5<Philips I2C bus>
                iic5<I2C generic I/O> at addr=0
            fbd0
        hdac0<Intel Haswell HDA Controller> pnpinfo vendor=0x8086 device=0x0c0c subvendor=0x17aa subdevice=0x2210 class=0x040300 at slot=3 function=0 dbsf=pci0:0:3:0 handle=\_SB_.PCI0.B0D3
            <Interrupt request lines>
                0x20
            <I/O memory addresses>
                0xf1630000-0xf1633fff
          hdacc0<Intel Haswell HDA CODEC> pnpinfo vendor=0x8086 device=0x2807 revision=0x00 stepping=0x00 at cad=0
            hdaa0<Intel Haswell Audio Function Group> pnpinfo type=0x01 subsystem=0x80860101 at nid=1
              pcm0<Intel Haswell (HDMI/DP 8ch)> at nid=3
        xhci0<Intel Lynx Point USB 3.0 controller> pnpinfo vendor=0x8086 device=0x8c31 subvendor=0x17aa subdevice=0x2210 class=0x0c0330 at slot=20 function=0 dbsf=pci0:0:20:0 handle=\_SB_.PCI0.XHCI
            <Interrupt request lines>
                0x21
            <I/O memory addresses>
                0xf1620000-0xf162ffff
          usbus0
            uhub2<Intel XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1>
              rtwn0<Realtek 802.11ac WLAN Adapter, class 0/0, rev 2.10/2.00, addr 1> pnpinfo vendor=0x2357 product=0x011e devclass=0x00 devsubclass=0x00 devproto=0x00 sernum="00e04c000001" release=0x0200 mode=host intclass=0xff intsubclass=0xff intprotocol=0xff at bus=0 hubaddr=1 port=2 devaddr=2 interface=0 ugen=ugen0.2
        unknown pnpinfo vendor=0x8086 device=0x8c3a subvendor=0x17aa subdevice=0x2210 class=0x078000 at slot=22 function=0 dbsf=pci0:0:22:0
            <I/O memory addresses>
                0xf1639000-0xf163900f
        em0<Intel(R) I217-LM LPT> pnpinfo vendor=0x8086 device=0x153a subvendor=0x17aa subdevice=0x2210 class=0x020000 at slot=25 function=0 dbsf=pci0:0:25:0 handle=\_SB_.PCI0.IGBE
            <Interrupt request lines>
                0x22
            <I/O ports>
                0x4080-0x409f
            <I/O memory addresses>
                0xf1600000-0xf161ffff
                0xf163f000-0xf163ffff
        ehci0<Intel Lynx Point USB 2.0 controller USB-B> pnpinfo vendor=0x8086 device=0x8c2d subvendor=0x17aa subdevice=0x2210 class=0x0c0320 at slot=26 function=0 dbsf=pci0:0:26:0 handle=\_SB_.PCI0.EHC2
            <Interrupt request lines>
                0x10
            <I/O memory addresses>
                0xf163e000-0xf163e3ff
          usbus1
            uhub0<Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1>
              uhub3<vendor 0x8087 product 0x8008, class 9/0, rev 2.00/0.04, addr 2> pnpinfo vendor=0x8087 product=0x8008 devclass=0x09 devsubclass=0x00 devproto=0x01 sernum="" release=0x0004 mode=host intclass=0x09 intsubclass=0x00 intprotocol=0x00 at bus=1 hubaddr=1 port=1 devaddr=2 interface=0 ugen=ugen1.2
        hdac1<Intel Lynx Point HDA Controller> pnpinfo vendor=0x8086 device=0x8c20 subvendor=0x17aa subdevice=0x2210 class=0x040300 at slot=27 function=0 dbsf=pci0:0:27:0 handle=\_SB_.PCI0.HDEF
            <Interrupt request lines>
                0x23
            <I/O memory addresses>
                0xf1634000-0xf1637fff
          hdacc1<Realtek ALC292 HDA CODEC> pnpinfo vendor=0x10ec device=0x0292 revision=0x00 stepping=0x01 at cad=0
            hdaa1<Realtek ALC292 Audio Function Group> pnpinfo type=0x01 subsystem=0x17aa2210 at nid=1
              pcm1<Realtek ALC292 (Analog 2.0+HP/2.0)> at nid=20,21,26
              pcm2<Realtek ALC292 (Internal Analog Mic)> at nid=18
        pcib1<ACPI PCI-PCI bridge> pnpinfo vendor=0x8086 device=0x8c10 subvendor=0x17aa subdevice=0x2210 class=0x060400 at slot=28 function=0 dbsf=pci0:0:28:0 handle=\_SB_.PCI0.EXP1
            <I/O memory addresses>
                0xf1500000-0xf15fffff
            <PCI domain 0 bus numbers>
                3
          pci1<ACPI PCI bus>
              <pcib1 bus numbers>
                  3
            rtsx0<2.1g Realtek RTS5227 PCIe SD Card Reader> pnpinfo vendor=0x10ec device=0x5227 subvendor=0x17aa subdevice=0x2210 class=0xff0000 at slot=0 function=0 dbsf=pci0:3:0:0
                <Interrupt request lines>
                    0x27
                <pcib1 memory window>
                    0xf1500000-0xf1500fff
        pcib2<ACPI PCI-PCI bridge> pnpinfo vendor=0x8086 device=0x8c12 subvendor=0x17aa subdevice=0x2210 class=0x060400 at slot=28 function=1 dbsf=pci0:0:28:1 handle=\_SB_.PCI0.EXP2
            <I/O memory addresses>
                0xf1400000-0xf14fffff
            <PCI domain 0 bus numbers>
                4
          pci2<ACPI PCI bus>
              <pcib2 bus numbers>
                  4
            iwm0<Intel(R) Dual Band Wireless AC 7260> pnpinfo vendor=0x8086 device=0x08b2 subvendor=0x8086 subdevice=0xc270 class=0x028000 at slot=0 function=0 dbsf=pci0:4:0:0
                <Interrupt request lines>
                    0x28
                <pcib2 memory window>
                    0xf1400000-0xf1401fff
        pcib3<ACPI PCI-PCI bridge> pnpinfo vendor=0x8086 device=0x8c14 subvendor=0x17aa subdevice=0x2210 class=0x060400 at slot=28 function=2 dbsf=pci0:0:28:2 handle=\_SB_.PCI0.EXP3
            <Interrupt request lines>
                0x24
            <I/O ports>
                0x3000-0x3fff
            <I/O memory addresses>
                0xf0400000-0xf0bfffff
                0xf0c00000-0xf13fffff
            <PCI domain 0 bus numbers>
                5-12
        ehci1<Intel Lynx Point USB 2.0 controller USB-A> pnpinfo vendor=0x8086 device=0x8c26 subvendor=0x17aa subdevice=0x2210 class=0x0c0320 at slot=29 function=0 dbsf=pci0:0:29:0 handle=\_SB_.PCI0.EHC1
            <Interrupt request lines>
                0x17
            <I/O memory addresses>
                0xf163d000-0xf163d3ff
          usbus2
            uhub1<Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1>
              uhub4<vendor 0x8087 product 0x8000, class 9/0, rev 2.00/0.04, addr 2> pnpinfo vendor=0x8087 product=0x8000 devclass=0x09 devsubclass=0x00 devproto=0x01 sernum="" release=0x0004 mode=host intclass=0x09 intsubclass=0x00 intprotocol=0x00 at bus=2 hubaddr=1 port=1 devaddr=2 interface=0 ugen=ugen2.2
        isab0<PCI-ISA bridge> pnpinfo vendor=0x8086 device=0x8c4f subvendor=0x17aa subdevice=0x2210 class=0x060100 at slot=31 function=0 dbsf=pci0:0:31:0 handle=\_SB_.PCI0.LPC_
          isa0<ISA bus>
            sc0
            vga0
        ahci0<Intel Lynx Point AHCI SATA controller> pnpinfo vendor=0x8086 device=0x8c03 subvendor=0x17aa subdevice=0x2210 class=0x010601 at slot=31 function=2 dbsf=pci0:0:31:2 handle=\_SB_.PCI0.SAT1
            <Interrupt request lines>
                0x25
            <I/O ports>
                0x4060-0x407f
                0x40a0-0x40a7
                0x40a8-0x40af
                0x40b0-0x40b3
                0x40b4-0x40b7
            <I/O memory addresses>
                0xf163c000-0xf163c7ff
          ahcich0<AHCI channel> at channel=0
              <I/O memory addresses>
                  0xf163c100-0xf163c17f
          ahcich1 at channel=1 (disabled)
          ahcich2 at channel=2 (disabled)
          ahcich3 at channel=3 (disabled)
          ahcich4 at channel=4 (disabled)
          ahcich5<AHCI channel> at channel=5
              <I/O memory addresses>
                  0xf163c380-0xf163c3ff
          ahciem0<AHCI enclosure management bridge>
              <I/O memory addresses>
                  0xf163c020-0xf163c023
                  0xf163c580-0xf163c587
        ichsmb0<Intel Lynx Point SMBus controller> pnpinfo vendor=0x8086 device=0x8c22 subvendor=0x17aa subdevice=0x2210 class=0x0c0500 at slot=31 function=3 dbsf=pci0:0:31:3 handle=\_SB_.PCI0.SMBU
            <Interrupt request lines>
                0x12
            <I/O ports>
                0xefa0-0xefbf
            <I/O memory addresses>
                0xf1638000-0xf16380ff
          smbus0<System Management Bus>
    acpi_sysresource1<System Resource> pnpinfo _HID=PNP0C02 _UID=0 _CID=none at handle=\_SB_.PCI0.LPC_.SIO_
    unknown pnpinfo _HID=PNP0000 _UID=0 _CID=none at handle=\_SB_.PCI0.LPC_.PIC_
        <I/O ports>
            0x20-0x21
            0xa0-0xa1
            0x4d0-0x4d1
    attimer0<AT timer> pnpinfo _HID=PNP0100 _UID=0 _CID=none at handle=\_SB_.PCI0.LPC_.TIMR
        <Interrupt request lines>
            0x0
        <I/O ports>
            0x40-0x43
    hpet0<High Precision Event Timer> pnpinfo _HID=PNP0103 _UID=0 _CID=none at handle=\_SB_.PCI0.LPC_.HPET
        <Interrupt request lines>
            0x18
            0x19
            0x1a
            0x1b
            0x1c
            0x1d
            0x1e
            0x1f
        <ACPI I/O memory addresses>
            0xfed00000-0xfed003ff
    atdma0<AT DMA controller> pnpinfo _HID=PNP0200 _UID=0 _CID=none at handle=\_SB_.PCI0.LPC_.DMAC
        <DMA request lines>
            4
        <I/O ports>
            0x0-0xf
            0x80-0x8f
            0xc0-0xdf
    unknown pnpinfo _HID=PNP0800 _UID=0 _CID=none at handle=\_SB_.PCI0.LPC_.SPKR
        <I/O ports>
            0x61
    fpupnp0<Legacy ISA coprocessor support> pnpinfo _HID=PNP0C04 _UID=0 _CID=none at handle=\_SB_.PCI0.LPC_.FPU_
        <I/O ports>
            0xf0
    atrtc0<AT realtime clock> pnpinfo _HID=PNP0B00 _UID=0 _CID=none at handle=\_SB_.PCI0.LPC_.RTC_
        <Interrupt request lines>
            0x8
        <I/O ports>
            0x70-0x71
    atkbdc0<Keyboard controller (i8042)> pnpinfo _HID=LEN0071 _UID=0 _CID=PNP0303 at handle=\_SB_.PCI0.LPC_.KBD_
        <Interrupt request lines>
            0x1
        <I/O ports>
            0x60
            0x64
      atkbd0<AT Keyboard>
      psm0<PS/2 Mouse>
          <Interrupt request lines>
              0xc
    psmcpnp0<Lenovo PS/2 clickpad port> pnpinfo _HID=LEN0034 _UID=0 _CID=PNP0F13 at handle=\_SB_.PCI0.LPC_.MOU_
    unknown pnpinfo _HID=SMO1200 _UID=1 _CID=PNP0C31 at handle=\_SB_.PCI0.LPC_.TPM_
        <I/O memory addresses>
            0xfed40000-0xfed44fff
    unknown pnpinfo _HID=PNP0C09 _UID=0 _CID=none at handle=\_SB_.PCI0.LPC_.EC__ (disabled)
    unknown pnpinfo _HID=none _UID=0 _CID=none at handle=\_SB_.PCI0.LPC_.EC__.PUBS
    battery0<ACPI Control Method Battery> pnpinfo _HID=PNP0C0A _UID=0 _CID=none at handle=\_SB_.PCI0.LPC_.EC__.BAT0
    acpi_acad0<AC Adapter> pnpinfo _HID=ACPI0003 _UID=0 _CID=none at handle=\_SB_.PCI0.LPC_.EC__.AC__
    acpi_ibm0<ThinkPad ACPI Extras> pnpinfo _HID=LEN0068 _UID=0 _CID=none at handle=\_SB_.PCI0.LPC_.EC__.HKEY
    unknown pnpinfo _HID=none _UID=0 _CID=none at handle=\_SB_.PCI0.PEG_.NVP3
    unknown pnpinfo _HID=none _UID=0 _CID=none at handle=\_SB_.PCI0.PEG_.NVP2
    unknown pnpinfo _HID=BCM2F1B _UID=0 _CID=BCM2F1B at handle=\_SB_.PCI0.SMBU.NFC_ (disabled)
    acpi_wmi0<ACPI-WMI mapping> pnpinfo _HID=PNP0C14 _UID=1 _CID=none at handle=\_SB_.WMI1
    acpi_wmi1<ACPI-WMI mapping> pnpinfo _HID=PNP0C14 _UID=2 _CID=none at handle=\_SB_.WMI2
    acpi_wmi2<ACPI-WMI mapping> pnpinfo _HID=PNP0C14 _UID=3 _CID=none at handle=\_SB_.WMI3
    unknown pnpinfo _HID=INT340F _UID=0 _CID=none at handle=\_SB_.PCCD
    unknown pnpinfo _HID=INT33A0 _UID=0 _CID=none at handle=\_SB_.IAOE
    acpi_tz0<Thermal Zone> pnpinfo _HID=none _UID=0 _CID=none at handle=\_TZ_.THM0
    acpi_timer0<24-bit timer at 3.579545MHz> pnpinfo unknown
        <ACPI I/O ports>
            0x1808-0x180b