Copyright (c) 1992-2012 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 7.5-YAHOO-20121028 #0 ybsd_9@324991: Sun Oct 28 22:08:46 UTC 2012
    kernel@yahoo-inc.com:/sys/amd64/compile/YAHOO amd64
CPU: QEMU Virtual CPU version 0.9.1 (1564.97-MHz K8-class CPU)
  Origin = "GenuineIntel"  Id = 0x663  Family = 0x6  Model = 0x6  Stepping = 3
  Features=0x783fbfd<FPU,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE,SSE2>
  Features2=0x80000001<SSE3,HV>
  AMD Features=0x20100800<SYSCALL,NX,LM>
real memory  = 536870912 (512 MB)
avail memory = 484253696 (461 MB)
Event timer "LAPIC" quality 400
ACPI APIC Table: <QEMU   QEMUAPIC>
ioapic0: Changing APIC ID to 1
ioapic0 <Version 1.1> irqs 0-23 on motherboard
kbd1 at kbdmux0
markdev driver module loaded
dell_bios0: Only works on Dell platform
acpi0: <QEMU QEMURSDT> on motherboard
acpi0: Power Button (fixed)
cpu0: <ACPI CPU> on acpi0
atrtc0: <AT realtime clock> port 0x70-0x71,0x72-0x77 irq 8 on acpi0
Event timer "RTC" frequency 32768 Hz quality 0
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0xb008-0xb00b on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pcib0: Length mismatch for 3 range: 3ec00000 vs 1ec00000
pci_link0: BIOS IRQ 9 does not match initial IRQ 10
pci_link0: BIOS IRQ 10 for 0.5.INTA does not match previous BIOS IRQ 9
pci0: <ACPI PCI bus> on pcib0
isab0: <PCI-ISA bridge> at device 1.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX3 WDMA2 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xc000-0xc00f at device 1.1 on pci0
ata0: <ATA channel> at channel 0 on atapci0
ata1: <ATA channel> at channel 1 on atapci0
uhci0: <Intel 82371SB (PIIX3) USB controller> port 0xc020-0xc03f irq 11 at device 1.2 on pci0
usbus0: controller did not stop
usbus0 on uhci0
intsmb0: <Intel PIIX4 SMBUS Interface> irq 9 at device 1.3 on pci0
intsmb0: intr IRQ 9 enabled revision 0
smbus0: <System Management Bus> on intsmb0
smb0: <SMBus generic I/O> on smbus0
vgapci0: <VGA-compatible display> mem 0xc2000000-0xc3ffffff,0xc4000000-0xc4000fff at device 2.0 on pci0
re0: <RealTek 8139C+ 10/100BaseTX> port 0xc100-0xc1ff mem 0xc4001000-0xc40010ff irq 11 at device 3.0 on pci0
re0: Chip rev. 0x74800000
re0: MAC rev. 0x00000000
miibus0: <MII bus> on re0
rlphy0: <RealTek internal media interface> PHY 0 on miibus0
rlphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto, auto-flow
re0: Ethernet address: 54:52:00:7d:9f:7d
virtio_pci0: <VirtIO PCI Block adapter> port 0xc200-0xc23f irq 11 at device 4.0 on pci0
vtblk0: <VirtIO Block Adapter> on virtio_pci0
virtio_pci0: host features: 0x41000014 <NotifyOnEmpty,DiskGeometry,MaxNumSegs>
virtio_pci0: negotiated features: 0x14 <DiskGeometry,MaxNumSegs>
vtblk0: 4096MB (8388608 512 byte sectors)
virtio_pci1: <VirtIO PCI Balloon adapter> port 0xc240-0xc25f irq 9 at device 5.0 on pci0
vtballoon0: <VirtIO Balloon Adapter> on virtio_pci1
virtio_pci1: host features: 0x41000000 <NotifyOnEmpty>
virtio_pci1: negotiated features: 0x0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
uart0: console (9600,n,8,1)
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
attimer0: <AT timer> at port 0x40 on isa0
Timecounter "i8254" frequency 1193182 Hz quality 0
attimer0: Can't map interrupt.
Timecounters tick every 10.000 msec
smbios: System Management BIOS version 2.4
Profiling kernel, textsize=7002352 [ffffffff8029ccb0..ffffffff8094a5a0]
usbus0: 12Mbps Full Speed USB v1.0
ugen0.1: <Intel> at usbus0
uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
cd0 at ata1 bus 0 scbus1 target 0 lun 0
cd0: <QEMU QEMU DVD-ROM 0.9.> Removable CD-ROM SCSI-0 device 
cd0: 16.700MB/s transfers (WDMA2, ATAPI 12bytes, PIO 65534bytes)
cd0: Attempt to query device size failed: NOT READY, Medium not present
ada0 at ata0 bus 0 scbus0 target 0 lun 0
ada0: <QEMU HARDDISK 0.9.1> ATA-7 device
ada0: 16.700MB/s transfers (WDMA2, PIO 8192bytes)
ada0: 10240MB (20971520 512 byte sectors: 16H 63S/T 16383C)
ada0: Previously was known as ad0
ylock 1.999.0 (syscall=244)
Timecounter "TSC" frequency 1564972254 Hz quality 800
pmc: Unknown Intel CPU.
hwpmc: SOFT/16/64/0x67<INT,USR,SYS,REA,WRI>
Root mount waiting for: usbus0
uhub0: 2 ports with 2 removable, self powered
Trying to mount root from ufs:/dev/ada0p3 [rw]...