U-Boot 1.1.4 (Jan 4 2011 - 16:52:21) AP94 (ar7100) U-boot 0.0.12 HTTPD-UIP: DRAM: b8050000: 0xc0140180 64 MB Top of RAM usable for U-Boot at: 84000000 Reserving 196k for U-Boot at: 83fcc000 Reserving 192k for malloc() at: 83f9c000 Reserving 44 Bytes for Board Info at: 83f9bfd4 Reserving 36 Bytes for Global Data at: 83f9bfb0 Reserving 128k for boot params() at: 83f7bfb0 Stack Pointer at: 83f7bf98 Now running in RAM - U-Boot at: 83fcc000 ar7100 flash_init: start ar7100_spi_flash_unblock: start flash size 8MB, sector count = 128 Flash: 8 MB Using default environment In: serial Out: serial Err: serial Net: rtl8366sr_phy_setup ethUnit=0 ar7100.c: eth0 using default MAC: c8:be:19:63:2a:cd eth0 up ar7100.c: eth1 using default MAC: c8:be:19:63:2a:ce eth1 up eth0, eth1 Hit any key to stop autoboot: 0 ### main_loop: no key string, allow autoboot ## Booting image at bf050000 ... Image Name: FreeBSD Image Type: MIPS Linux Kernel Image (lzma compressed) Data Size: 991763 Bytes = 968.5 kB Load Address: 80050000 Entry Point: 80050100 Verifying Checksum ... OK LZMA Umcompressing Kernel Image ... Image loaded from 80050000-8043bf97 OK No initrd ## Transferring control to Linux (at address 80050100) ... ## Giving linux memsize in bytes, 67108864 Starting kernel ... CPU platform: Atheros AR7161 rev 2 CPU Frequency=680 MHz CPU DDR Frequency=340 MHz CPU AHB Frequency=170 MHz platform frequency: 680000000 CPU reference clock: 40 MHz arguments: a0 = 00000007 a1 = a3f7bfb0 a2 = a3f7c460 a3 = 00000008 Cmd line:argv is invalid Environment: envp is invalid Cache info: picache_stride = 4096 picache_loopcount = 16 pdcache_stride = 4096 pdcache_loopcount = 8 cpu0: MIPS Technologies processor v116.147 MMU: Standard TLB, 16 entries L1 i-cache: 4 ways of 512 sets, 32 bytes per line L1 d-cache: 4 ways of 256 sets, 32 bytes per line Config1=0x9ee3519e Config3=0x20 KDB: debugger backends: ddb KDB: current backend: ddb Copyright (c) 1992-2013 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 10.0-CURRENT #14 r254678M: Thu Aug 22 22:51:08 PDT 2013 sbruno@powernoodle:/home/sbruno/bsd/obj/mipseb/mips.mips/home/sbruno/bsd/head/sys/DIR-825 mips gcc version 4.2.1 20070831 patched [FreeBSD] WARNING: WITNESS option enabled, expect reduced performance. MEMGUARD DEBUGGING ALLOCATOR INITIALIZED: MEMGUARD map base: 0xc0800000 MEMGUARD map size: 104860 KBytes real memory = 67108864 (65536K bytes) avail memory = 59285504 (56MB) random device not loaded; using insecure entropy nexus0: clock0: on nexus0 Timecounter "MIPS32" frequency 340000000 Hz quality 800 Event timer "MIPS32" frequency 340000000 Hz quality 800 apb0 at irq 4 on nexus0 uart0: <16550 or compatible> on apb0 uart0: console (115200,n,8,1) pcib0 at irq 0 on nexus0 pcib0: ar71xx_pci_attach: missing hint 'baseslot', default to AR71XX_PCI_BASE_SLOT pcib0: found EEPROM at 0x1f661000 on 0.17.0 pcib0: EEPROM firmware: 0x1f661000 @ 4096 bytes pcib0: device EEPROM 'pcib.0.bus.0.17.0.eeprom_firmware' registered pcib0: found EEPROM at 0x1f665000 on 0.18.0 pcib0: EEPROM firmware: 0x1f665000 @ 4096 bytes pcib0: device EEPROM 'pcib.0.bus.0.18.0.eeprom_firmware' registered pci0: on pcib0 pci0: at device 17.0 (no driver attached) pci0: at device 18.0 (no driver attached) arge0: at mem 0x19000000-0x19000fff irq 2 on nexus0 arge0: Overriding MAC from EEPROM arge0: Vendor stores MAC in ASCII format arge0: finishing attachment, phymask 0000, proxy null arge0: Ethernet address: c8:be:19:63:2a:cd arge1: at mem 0x1a000000-0x1a000fff irq 3 on nexus0 arge1: Overriding MAC from EEPROM arge1: Vendor stores MAC in ASCII format arge1: finishing attachment, phymask 0000, proxy null arge1: Ethernet address: c8:be:19:63:2a:cf spi0: at mem 0x1f000000-0x1f00000f on nexus0 spibus0: on spi0 mx25l0: at cs 0 on spibus0 mx25l0: m25p64, sector 65536 bytes, 128 sectors ar71xx_wdog0: on nexus0 Timecounters tick every 1.000 msec map/rootfs.uncompress: GEOM_ULZMA image found map/rootfs.uncompress: 174 x 131072 blocks WARNING: WITNESS option enabled, expect reduced performance. Trying to mount root from ufs:/dev/map/rootfs.uncompress []... warning: no time-of-day clock registered, system time will not be set accurately Aug 23 05:51:31 init: login_getclass: unknown class 'daemon' *** Populating /var .. *** Loading configuration files .. *** Restoring from /dev/map/cfg .. 1+0 records in 1+0 records out 65536 bytes transferred in 0.093819 secs (698535 bytes/sec) gunzip: (stdin): trailing garbage ignored etc/cfg/manifest etc/master.passwd etc/group etc/cfg/rc.conf etc/cfg/hostapd.wlan0.conf 8 blocks *** Completed. *** setting up hostname *** Load kernel modules ath0: irq 0 at device 17.0 on pci0 ath0: ath_pci_attach: EEPROM firmware @ 0xc6ecb000 ath0: [HT] enabling HT modes ath0: [HT] 1 stream STBC receive enabled ath0: [HT] 1 stream STBC transmit enabled ath0: [HT] 2 RX streams; 2 TX streams ath0: AR9220 mac 128.2 RF5133 phy 13.0 ath0: 2GHz radio: 0x0000; 5GHz radio: 0x00c0 ath1: irq 1 at device 18.0 on pci0 ath1: ath_pci_attach: EEPROM firmware @ 0xc6ece000 [ath] enabling AN_TOP2_FIXUP ath1: [HT] enabling HT modes ath1: [HT] 1 stream STBC receive enabled ath1: [HT] 1 stream STBC transmit enabled ath1: [HT] 2 RX streams; 2 TX streams ath1: AR9220 mac 128.2 RF5133 phy 13.0 ath1: 2GHz radio: 0x0000; 5GHz radio: 0x00c0 random: initialized ehci0: at mem 0x1b000000-0x1bffffff irq 1 on nexus0 usbus0: set host controller mode usbus0: EHCI version 1.0 usbus0: set host controller mode usbus0 on ehci0 usbus0: 480Mbps High Speed USB v2.0 ugen0.1: at usbus0 uhub0: on usbus0 *** bringing up loopback .. *** Starting networking via /etc/rc.d/base/net uhub0: 2 ports with 2 removable, self powered dev.ath.0.txq_mcastq_maxdepth: 512 -> 32 dev.ath.1.txq_mcastq_maxdepth: 512 -> 32 *** Interface: arge0: start *** Interface: arge0: done *** Interface: wlan0: start wlan0: Ethernet address: 00:00:88:88:22:22 *** Starting hostapd.. Configuration file: /etc/cfg/hostapd.wlan0.conf Using interface wlan0 with hwaddr 00:00:88:88:22:22 and ssid "TESTBRUNO" *** Interface: wlan0: done *** Interface: bridge0: start bridge0: Ethernet address: 2a:9b:a1:9d:bb:3b arge0: promiscuous mode enabled bridge0: link state changed to UP *** Interface: bridge0: done *** Default password/login databases .. *** inetd *** Done! FreeBSD/mips (bruno-rtr) (ttyu0)