U-Boot 1.1.4 (Jan 4 2011 - 16:52:21) AP94 (ar7100) U-boot 0.0.12 HTTPD-UIP: DRAM: b8050000: 0xc0140180 64 MB Top of RAM usable for U-Boot at: 84000000 Reserving 196k for U-Boot at: 83fcc000 Reserving 192k for malloc() at: 83f9c000 Reserving 44 Bytes for Board Info at: 83f9bfd4 Reserving 36 Bytes for Global Data at: 83f9bfb0 Reserving 128k for boot params() at: 83f7bfb0 Stack Pointer at: 83f7bf98 Now running in RAM - U-Boot at: 83fcc000 ar7100 flash_init: start ar7100_spi_flash_unblock: start flash size 8MB, sector count = 128 Flash: 8 MB Using default environment In: serial Out: serial Err: serial Net: rtl8366sr_phy_setup ethUnit=0 ar7100.c: eth0 using default MAC: c8:be:19:63:2a:cd eth0 up ar7100.c: eth1 using default MAC: c8:be:19:63:2a:ce eth1 up eth0, eth1 Hit any key to stop autoboot: 0 ### main_loop: no key string, allow autoboot ## Booting image at bf050000 ... Image Name: FreeBSD Image Type: MIPS Linux Kernel Image (lzma compressed) Data Size: 990523 Bytes = 967.3 kB Load Address: 80050000 Entry Point: 80050100 Verifying Checksum ... OK LZMA Umcompressing Kernel Image ... Image loaded from 80050000-8043be4c OK No initrd ## Transferring control to Linux (at address 80050100) ... ## Giving linux memsize in bytes, 67108864 Starting kernel ... CPU platform: Atheros AR7161 rev 2 CPU Frequency=680 MHz CPU DDR Frequency=340 MHz CPU AHB Frequency=170 MHz platform frequency: 680000000 CPU reference clock: 40 MHz arguments: a0 = 00000007 a1 = a3f7bfb0 a2 = a3f7c460 a3 = 00000008 Cmd line:argv is invalid Environment: envp is invalid Cache info: picache_stride = 4096 picache_loopcount = 16 pdcache_stride = 4096 pdcache_loopcount = 8 cpu0: MIPS Technologies processor v116.147 MMU: Standard TLB, 16 entries L1 i-cache: 4 ways of 512 sets, 32 bytes per line L1 d-cache: 4 ways of 256 sets, 32 bytes per line Config1=0x9ee3519e Config3=0x20 Physical memory chunk(s): 0x4e9000 - 0x3ffffff, 61960192 bytes (15127 pages) Maxmem is 0x4000000 KDB: debugger backends: ddb KDB: current backend: ddb Copyright (c) 1992-2013 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 10.0-CURRENT #1 r254450M: Sat Aug 17 18:33:33 PDT 2013 sbruno@alice:/home/sbruno/bsd/obj/mipseb/mips.mips/home/sbruno/bsd/fbsd_head/sys/DIR-825 mips gcc version 4.2.1 20070831 patched [FreeBSD] WARNING: WITNESS option enabled, expect reduced performance. MEMGUARD DEBUGGING ALLOCATOR INITIALIZED: MEMGUARD map base: 0xc0400000 MEMGUARD map size: 104860 KBytes Preloaded elf kernel "kernel" at 0x804e3204. real memory = 67108864 (65536K bytes) Physical memory chunk(s): 0x0057d000 - 0x03eb6fff, 60006400 bytes (14650 pages) avail memory = 59285504 (56MB) random device not loaded; using insecure entropy mem: null: nexus0: clock0: on nexus0 Timecounter "MIPS32" frequency 340000000 Hz quality 800 Event timer "MIPS32" frequency 340000000 Hz quality 800 apb0 at irq 4 on nexus0 uart0: <16550 or compatible> on apb0 uart0: console (115200,n,8,1) uart0: fast interrupt pcib0 at irq 0 on nexus0 pcib0: ar71xx_pci_attach: missing hint 'baseslot', default to AR71XX_PCI_BASE_SLOT pcib0: ar71xx_pci_slot_fixup: checking dev pcib0, 0/17/0 pcib0: found EEPROM at 0x1f661000 on 0.17.0 pcib0: ar71xx_pci_fixup: flash_addr=1f661000, cal_data=0xbf661000 reg: 6000, val=29168c reg: 6008, val=2800001 reg: 602c, val=a095168c reg: 5000, val=2a168c reg: 5008, val=2800001 reg: 502c, val=a095168c reg: 5064, val=5040cc0 reg: 506c, val=33811 reg: 4004, val=40073b reg: 4074, val=3 reg: 4000, val=1c20000 reg: 6034, val=44 pcib0: EEPROM firmware: 0x1f661000 @ 4096 bytes firmware: 'pcib.0.bus.0.17.0.eeprom_firmware' version 1: 4096 bytes loaded at 0xc6acb000 pcib0: device EEPROM 'pcib.0.bus.0.17.0.eeprom_firmware' registered pcib0: ar71xx_pci_slot_fixup: checking dev pcib0, 0/18/0 pcib0: found EEPROM at 0x1f665000 on 0.18.0 pcib0: ar71xx_pci_fixup: flash_addr=1f665000, cal_data=0xbf665000 reg: 6000, val=29168c reg: 6008, val=2800001 reg: 602c, val=a094168c reg: 5000, val=2a168c reg: 5008, val=2800001 reg: 502c, val=a094168c reg: 5064, val=5040cc0 reg: 506c, val=33811 reg: 4004, val=40073b reg: 4074, val=3 reg: 4000, val=1c20000 reg: 6034, val=44 pcib0: EEPROM firmware: 0x1f665000 @ 4096 bytes firmware: 'pcib.0.bus.0.18.0.eeprom_firmware' version 1: 4096 bytes loaded at 0xc6ace000 pcib0: device EEPROM 'pcib.0.bus.0.18.0.eeprom_firmware' registered pci0: on pcib0 pci0: domain=0, physical bus=0 found-> vendor=0x168c, dev=0x0029, revid=0x01 domain=0, bus=0, slot=17, func=0 class=02-80-00, hdrtype=0x00, mfdev=0 cmdreg=0x0000, statreg=0x02b0, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=0 powerspec 2 supports D0 D3 current D0 map[10]: type Memory, range 32, base 0, size 16, memory disabled found-> vendor=0x168c, dev=0x0029, revid=0x01 domain=0, bus=0, slot=18, func=0 class=02-80-00, hdrtype=0x00, mfdev=0 cmdreg=0x0000, statreg=0x02b0, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=0 powerspec 2 supports D0 D3 current D0 map[10]: type Memory, range 32, base 0, size 16, memory disabled pci0: at device 17.0 (no driver attached) pci0: at device 18.0 (no driver attached) arge0: at mem 0x19000000-0x19000fff irq 2 on nexus0 arge0: Generating random ethernet address. arge0: finishing attachment, phymask 0000, proxy null arge0: bpf attached arge0: Ethernet address: 62:73:64:0a:ff:5d arge1: at mem 0x1a000000-0x1a000fff irq 3 on nexus0 arge1: Generating random ethernet address. arge1: finishing attachment, phymask 0000, proxy null arge1: bpf attached arge1: Ethernet address: 62:73:64:85:09:0a spi0: at mem 0x1f000000-0x1f00000f on nexus0 spibus0: on spi0 mx25l0: at cs 0 on spibus0 mx25l0: m25p64, sector 65536 bytes, 128 sectors ar71xx_wdog0: on nexus0 Device configuration finished. Timecounters tick every 1.000 msec tcp_init: net.inet.tcp.tcbhashsize auto tuned to 1024 lo0: bpf attached GEOM: new disk flash/spi0 MAP: 0x40000, data=0x40000 "/dev/map/uboot" MAP: 40000x10000, data=0x10000 "/dev/map/cfg" MAP: 50000x100000, data=0x100000 "/dev/map/kernel" MAP: 150000x510000, data=0x510000 "/dev/map/rootfs" MAP: 660000x10000, data=0x10000 "/dev/map/art" map/rootfs.uncompress: GEOM_ULZMA image found map/rootfs.uncompress: 174 x 131072 blocks MAP: No valid partition found at map/rootfs.uncompress WARNING: WITNESS option enabled, expect reduced performance. Trying to mount root from ufs:/dev/map/rootfs.uncompress []... warning: no time-of-day clock registered, system time will not be set accurately start_init: trying /sbin/init Aug 18 01:34:06 init: login_getclass: unknown class 'daemon' MAP: No valid partition found at md0 MAP: No valid partition found at md0 MAP: No valid partition found at md1 MAP: No valid partition found at md1 MAP: No valid partition found at md2 MAP: No valid partition found at md2 *** Populating /var .. *** Loading configuration files .. *** Restoring from /dev/map/cfg .. 1+0 records in 1+0 records out 65536 bytes transferred in 0.093748 secs (699065 bytes/sec) gunzip: (stdin): trailing garbage ignored etc/cfg/manifest etc/master.passwd etc/group etc/cfg/rc.conf etc/cfg/hostapd.wlan0.conf 8 blocks *** Completed. *** setting up hostname *** Load kernel modules wlan: <802.11 Link Layer> pci0: driver added found-> vendor=0x168c, dev=0x0029, revid=0x01 domain=0, bus=0, slot=17, func=0 class=02-80-00, hdrtype=0x00, mfdev=0 cmdreg=0x0000, statreg=0x02b0, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=0 powerspec 2 supports D0 D3 current D0 pci0:0:17:0: reprobing on driver added ath0: irq 0 at device 17.0 on pci0 ath0: Lazy allocation of 0x10000 bytes rid 0x10 type 3 at 0x10000000 ath0: ath_pci_attach: looking up firmware @ 'pcib.0.bus.0.17.0.eeprom_firmware' ath0: ath_pci_attach: EEPROM firmware @ 0xc6acb000 ath0: [HT] enabling HT modes ath0: [HT] 1 stream STBC receive enabled ath0: [HT] 1 stream STBC transmit enabled ath0: [HT] 2 RX streams; 2 TX streams ath0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps ath0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps ath0: 2T2R ath0: 11ng MCS 20MHz ath0: MCS 0-7: 6.5Mbps - 65Mbps ath0: MCS 8-15: 13Mbps - 130Mbps ath0: 11ng MCS 40MHz: ath0: MCS 0-7: 13.5Mbps - 135Mbps ath0: MCS 8-15: 27Mbps - 270Mbps ath0: 11ng MCS 40MHz SGI: ath0: MCS 0-7: 15Mbps - 150Mbps ath0: MCS 8-15: 30Mbps - 300Mbps ath0: AR9220 mac 128.2 RF5133 phy 13.0 ath0: 2GHz radio: 0x0000; 5GHz radio: 0x00c0 ath0: Use hw queue 1 for WME_AC_BE traffic ath0: Use hw queue 0 for WME_AC_BK traffic ath0: Use hw queue 2 for WME_AC_VI traffic ath0: Use hw queue 3 for WME_AC_VO traffic ath0: Use hw queue 8 for CAB traffic ath0: Use hw queue 9 for beacons ath0: using multicast key search found-> vendor=0x168c, dev=0x0029, revid=0x01 domain=0, bus=0, slot=18, func=0 class=02-80-00, hdrtype=0x00, mfdev=0 cmdreg=0x0000, statreg=0x02b0, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=1 powerspec 2 supports D0 D3 current D0 pci0:0:18:0: reprobing on driver added ath1: irq 1 at device 18.0 on pci0 ath1: Lazy allocation of 0x10000 bytes rid 0x10 type 3 at 0x10010000 ath1: ath_pci_attach: looking up firmware @ 'pcib.0.bus.0.18.0.eeprom_firmware' ath1: ath_pci_attach: EEPROM firmware @ 0xc6ace000 [ath] enabling AN_TOP2_FIXUP ath1: [HT] enabling HT modes ath1: [HT] 1 stream STBC receive enabled ath1: [HT] 1 stream STBC transmit enabled ath1: [HT] 2 RX streams; 2 TX streams ath1: 11a rates: 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps ath1: 2T2R ath1: 11na MCS 20MHz ath1: MCS 0-7: 6.5Mbps - 65Mbps ath1: MCS 8-15: 13Mbps - 130Mbps ath1: 11na MCS 40MHz: ath1: MCS 0-7: 13.5Mbps - 135Mbps ath1: MCS 8-15: 27Mbps - 270Mbps ath1: 11na MCS 40MHz SGI: ath1: MCS 0-7: 15Mbps - 150Mbps ath1: MCS 8-15: 30Mbps - 300Mbps ath1: AR9220 mac 128.2 RF5133 phy 13.0 ath1: 2GHz radio: 0x0000; 5GHz radio: 0x00c0 ath1: Use hw queue 1 for WME_AC_BE traffic ath1: Use hw queue 0 for WME_AC_BK traffic ath1: Use hw queue 2 for WME_AC_VI traffic ath1: Use hw queue 3 for WME_AC_VO traffic ath1: Use hw queue 8 for CAB traffic ath1: Use hw queue 9 for beacons ath1: using multicast key search random: initialized *** bringing up loopback .. *** Starting networking via /etc/rc.d/base/net dev.ath.0.txq_mcastq_maxdepth: 512 -> 32 dev.ath.1.txq_mcastq_maxdepth: 512 -> 32 *** Interface: arge0: start *** Interface: arge0: done *** Interface: wlan0: start wlan0: bpf attached wlan0: bpf attached wlan0: Ethernet address: 00:00:88:88:22:22 *** Starting hostapd.. Configuration file: /etc/cfg/hostapd.wlan0.conf Using interface wlan0 with hwaddr 00:00:88:88:22:22 and ssid "TESTBRUNO" *** Interface: wlan0: done *** Interface: bridge0: start bridge0: bpf attached bridge0: Ethernet address: 46:67:60:08:6b:31 arge0: promiscuous mode enabled bridge0: link state changed to UP *** Interface: bridge0: done *** Default password/login databases .. *** inetd *** Done! FreeBSD/mips (bruno-rtr) (ttyu0) login: