PC-BSD 9.0 Diagnostic Sheet Generated: Sun Apr 15 14:53:31 PDT 2012 -----------------Dmesg Output------------------------- Copyright (c) 1992-2011 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 9.0-RELEASE #3: Tue Dec 27 14:14:29 PST 2011 root@build9x64.pcbsd.org:/usr/obj/builds/amd64/pcbsd-build90/fbsd-source/9.0/sys/GENERIC amd64 CPU: AMD FX(tm)-8150 Eight-Core Processor (3599.98-MHz K8-class CPU) Origin = "AuthenticAMD" Id = 0x600f12 Family = 15 Model = 1 Stepping = 2 Features=0x178bfbff Features2=0x1698220b AMD Features=0x2e500800 AMD Features2=0x1c9bfff,> TSC: P-state invariant, performance statistics real memory = 17179869184 (16384 MB) avail memory = 15438618624 (14723 MB) Event timer "LAPIC" quality 400 ACPI APIC Table: <031612 APIC2114> FreeBSD/SMP: Multiprocessor System Detected: 8 CPUs FreeBSD/SMP: 1 package(s) x 8 core(s) cpu0 (BSP): APIC ID: 16 cpu1 (AP): APIC ID: 17 cpu2 (AP): APIC ID: 18 cpu3 (AP): APIC ID: 19 cpu4 (AP): APIC ID: 20 cpu5 (AP): APIC ID: 21 cpu6 (AP): APIC ID: 22 cpu7 (AP): APIC ID: 23 ioapic0: Changing APIC ID to 24 ioapic0 irqs 0-23 on motherboard kbd1 at kbdmux0 cryptosoft0: on motherboard acpi0: <031612 XSDT2114> on motherboard acpi0: Power Button (fixed) acpi0: reservation of fee00000, 1000 (3) failed acpi0: reservation of ffb80000, 80000 (3) failed acpi0: reservation of fec10000, 20 (3) failed acpi0: reservation of fed40000, 5000 (3) failed acpi0: reservation of fed80000, 1000 (3) failed acpi0: reservation of 0, a0000 (3) failed acpi0: reservation of 100000, 8ff00000 (3) failed Timecounter "ACPI-safe" frequency 3579545 Hz quality 850 acpi_timer0: <32-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 cpu0: on acpi0 cpu1: on acpi0 cpu2: on acpi0 cpu3: on acpi0 cpu4: on acpi0 cpu5: on acpi0 cpu6: on acpi0 cpu7: on acpi0 acpi_ec0: port 0x62,0x66 on acpi0 pcib0: port 0xcf8-0xcff on acpi0 pci0: on pcib0 pcib1: at device 1.0 on pci0 pci1: on pcib1 vgapci0: port 0xd000-0xd0ff mem 0xd0000000-0xdfffffff,0xfeaf0000-0xfeafffff,0xfe900000-0xfe9fffff irq 18 at device 5.0 on pci1 hdac0: mem 0xfeae8000-0xfeaebfff irq 19 at device 5.1 on pci1 pcib2: irq 19 at device 7.0 on pci0 pci2: on pcib2 xhci0: mem 0xfebf0000-0xfebf7fff irq 19 at device 0.0 on pci2 xhci0: 32 byte context size. usbus0 on xhci0 pcib3: irq 18 at device 10.0 on pci0 pci3: on pcib3 re0: port 0xe800-0xe8ff mem 0xfdfff000-0xfdffffff,0xfdff8000-0xfdffbfff irq 18 at device 0.0 on pci3 re0: Using 1 MSI-X message re0: Chip rev. 0x2c800000 re0: MAC rev. 0x00000000 miibus0: on re0 rgephy0: PHY 1 on miibus0 rgephy0: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow re0: Ethernet address: f4:6d:04:7a:51:96 ahci0: port 0xc000-0xc007,0xb000-0xb003,0xa000-0xa007,0x9000-0x9003,0x8000-0x800f mem 0xfe8ffc00-0xfe8fffff irq 19 at device 17.0 on pci0 ahci0: AHCI v1.20 with 4 6Gbps ports, Port Multiplier supported ahcich0: at channel 0 on ahci0 ahcich1: at channel 1 on ahci0 ahcich2: at channel 2 on ahci0 ahcich3: at channel 3 on ahci0 ohci0: mem 0xfe8fe000-0xfe8fefff irq 18 at device 18.0 on pci0 usbus1: on ohci0 ehci0: mem 0xfe8ff800-0xfe8ff8ff irq 17 at device 18.2 on pci0 usbus2: EHCI version 1.0 usbus2: on ehci0 ohci1: mem 0xfe8fd000-0xfe8fdfff irq 18 at device 19.0 on pci0 usbus3: on ohci1 ehci1: mem 0xfe8ff400-0xfe8ff4ff irq 17 at device 19.2 on pci0 usbus4: EHCI version 1.0 usbus4: on ehci1 pci0: at device 20.0 (no driver attached) atapci0: port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xff00-0xff0f at device 20.1 on pci0 ata0: on atapci0 ata1: on atapci0 hdac1: mem 0xfe8f8000-0xfe8fbfff irq 16 at device 20.2 on pci0 isab0: at device 20.3 on pci0 isa0: on isab0 pcib4: at device 20.4 on pci0 pci4: on pcib4 ohci2: mem 0xfe8fc000-0xfe8fcfff irq 18 at device 20.5 on pci0 usbus5: on ohci2 ohci3: mem 0xfe8f7000-0xfe8f7fff irq 18 at device 22.0 on pci0 usbus6: on ohci3 ehci2: mem 0xfe8ff000-0xfe8ff0ff irq 17 at device 22.2 on pci0 usbus7: EHCI version 1.0 usbus7: on ehci2 acpi_button0: on acpi0 attimer0: port 0x40-0x43 irq 0 on acpi0 Timecounter "i8254" frequency 1193182 Hz quality 0 Event timer "i8254" frequency 1193182 Hz quality 100 atrtc0: port 0x70-0x71 irq 8 on acpi0 Event timer "RTC" frequency 32768 Hz quality 0 hpet0: iomem 0xfed00000-0xfed003ff on acpi0 Timecounter "HPET" frequency 14318180 Hz quality 950 Event timer "HPET" frequency 14318180 Hz quality 450 Event timer "HPET1" frequency 14318180 Hz quality 450 Event timer "HPET2" frequency 14318180 Hz quality 450 uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 orm0: at iomem 0xc0000-0xcefff on isa0 sc0: at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> vga0: at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 atkbdc0: at port 0x60,0x64 on isa0 atkbd0: irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] ppc0: cannot reserve I/O port range hwpstate0: on cpu0 ZFS filesystem version 5 ZFS storage pool version 28 Timecounters tick every 1.000 msec hdac0: HDA Codec #0: ATI RS690/780 HDMI pcm0: at cad 0 nid 1 on hdac0 hdac1: HDA Codec #0: Realtek ALC892 pcm1: at cad 0 nid 1 on hdac1 pcm2: at cad 0 nid 1 on hdac1 pcm3: at cad 0 nid 1 on hdac1 pcm4: at cad 0 nid 1 on hdac1 usbus0: 5.0Gbps Super Speed USB v3.0 usbus1: 12Mbps Full Speed USB v1.0 usbus2: 480Mbps High Speed USB v2.0 usbus3: 12Mbps Full Speed USB v1.0 usbus4: 480Mbps High Speed USB v2.0 usbus5: 12Mbps Full Speed USB v1.0 usbus6: 12Mbps Full Speed USB v1.0 usbus7: 480Mbps High Speed USB v2.0 ugen0.1: <0x1b21> at usbus0 uhub0: <0x1b21 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 ugen1.1: at usbus1 uhub1: on usbus1 ugen2.1: at usbus2 uhub2: on usbus2 ugen3.1: at usbus3 uhub3: on usbus3 ugen4.1: at usbus4 uhub4: on usbus4 ugen5.1: at usbus5 uhub5: on usbus5 ugen6.1: at usbus6 uhub6: on usbus6 ugen7.1: at usbus7 uhub7: on usbus7 uhub5: 2 ports with 2 removable, self powered uhub6: 4 ports with 4 removable, self powered uhub1: 5 ports with 5 removable, self powered uhub3: 5 ports with 5 removable, self powered uhub0: 4 ports with 4 removable, self powered uhub7: 4 ports with 4 removable, self powered uhub2: 5 ports with 5 removable, self powered uhub4: 5 ports with 5 removable, self powered ugen1.2: at usbus1 ulpt0: on usbus1 ulpt0: using bi-directional mode ugen1.3: at usbus1 ukbd0: on usbus1 kbd2 at ukbd0 ums0: on usbus1 ums0: 10 buttons and [XYZT] coordinates ID=2 ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 ada0: ATA-8 SATA 2.x device ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes) ada0: Command Queueing enabled ada0: 1907729MB (3907029168 512 byte sectors: 16H 63S/T 16383C) ada0: Previously was known as ad4 SMP: AP CPU #1 Launched! SMP: AP CPU #7 Launched! SMP: AP CPU #3 Launched! SMP: AP CPU #6 Launched! SMP: AP CPU #2 Launched! SMP: AP CPU #5 Launched! SMP: AP CPU #4 Launched! Timecounter "TSC-low" frequency 14062436 Hz quality 1000 Trying to mount root from zfs:tank0 []... Cuse4BSD v0.1.21 @ /dev/cuse WARNING: attempt to domain_add(bluetooth) after domainfinalize() fuse4bsd: version 0.3.9-pre1, FUSE ABI 7.8 hwpstate0: set freq failed, err 6 hwpstate0: set freq failed, err 6 hwpstate0: set freq failed, err 6 hwpstate0: set freq failed, err 6 hwpstate0: set freq failed, err 6 hwpstate0: set freq failed, err 6 hwpstate0: set freq failed, err 6 hwpstate0: set freq failed, err 6 hwpstate0: set freq failed, err 6 hwpstate0: set freq failed, err 6 hwpstate0: set freq failed, err 6 hwpstate0: set freq failed, err 6 hwpstate0: set freq failed, err 6 hwpstate0: set freq failed, err 6 hwpstate0: set freq failed, err 6 hwpstate0: set freq failed, err 6 -----------------Messages Output---------------------- Apr 15 14:48:45 Alice dbus[1906]: [system] Activating service name='org.freedesktop.SystemToolsBackends' (using servicehelper) Apr 15 14:48:45 Alice dbus[1906]: [system] Successfully activated service 'org.freedesktop.SystemToolsBackends' Apr 15 14:48:45 Alice dbus[1906]: [system] Activating service name='org.freedesktop.SystemToolsBackends.SMBConfig' (using servicehelper) Apr 15 14:48:45 Alice dbus[1906]: [system] Activating service name='org.freedesktop.SystemToolsBackends.NFSConfig' (using servicehelper) Apr 15 14:48:46 Alice dbus[1906]: [system] Rejected send message, 2 matched rules; type="method_call", sender=":1.35" (uid=1001 pid=2452 comm="nautilus ") interface="org.freedesktop.DBus.Properties" member="GetAll" error name="(unset)" requested_reply="0" destination=":1.2" (uid=0 pid=2139 comm="/usr/local/sbin/console-kit-daemon --no-daemon ") Apr 15 14:48:47 Alice dbus[1906]: [system] Successfully activated service 'org.freedesktop.SystemToolsBackends.SMBConfig' Apr 15 14:48:47 Alice dbus[1906]: [system] Successfully activated service 'org.freedesktop.SystemToolsBackends.NFSConfig' Apr 15 14:48:47 Alice dbus[1906]: [system] Activating service name='org.freedesktop.SystemToolsBackends.Platform' (using servicehelper) Apr 15 14:48:47 Alice dbus[1906]: [system] Activating service name='org.gnome.SettingsDaemon.DateTimeMechanism' (using servicehelper) Apr 15 14:48:47 Alice dbus[1906]: [system] Successfully activated service 'org.freedesktop.SystemToolsBackends.Platform' Apr 15 14:48:47 Alice dbus[1906]: [system] Successfully activated service 'org.gnome.SettingsDaemon.DateTimeMechanism' Apr 15 14:48:49 Alice sudo: sbruno : TTY=unknown ; PWD=/usr/home/sbruno ; USER=root ; COMMAND=/usr/local/bin/life-preserver -tray Apr 15 14:49:15 Alice kernel: hwpstate0: set freq failed, err 6 Apr 15 14:49:39 Alice last message repeated 6 times Apr 15 14:50:48 Alice last message repeated 3 times Apr 15 14:52:31 Alice last message repeated 5 times Apr 15 14:53:07 Alice su: sbruno to root on /dev/pts/2 Apr 15 14:53:09 Alice gnome-keyring-daemon[2271]: Xlib: extension "RANDR" missing on display ":0". Apr 15 14:53:11 Alice gnome-keyring-prompt: couldn't allocate secure memory to keep passwords and or keys from being written to the disk Apr 15 14:53:11 Alice gnome-keyring-daemon[2271]: ** Message: couldn't allocate secure memory to keep passwords and or keys from being written to the disk ------------------pciconf----------------------------- hostb0@pci0:0:0:0: class=0x060000 card=0x843e1043 chip=0x96011022 rev=0x00 hdr=0x00 vendor = 'Advanced Micro Devices [AMD]' device = 'RS880 Host Bridge' class = bridge subclass = HOST-PCI pcib1@pci0:0:1:0: class=0x060400 card=0x843e1043 chip=0x96021043 rev=0x00 hdr=0x01 vendor = 'ASUSTeK Computer Inc.' device = 'RS880 PCI to PCI bridge (int gfx)' class = bridge subclass = PCI-PCI pcib2@pci0:0:7:0: class=0x060400 card=0x843e1043 chip=0x96071022 rev=0x00 hdr=0x01 vendor = 'Advanced Micro Devices [AMD]' device = 'RS780 PCI to PCI bridge (PCIE port 3)' class = bridge subclass = PCI-PCI pcib3@pci0:0:10:0: class=0x060400 card=0x843e1043 chip=0x96091022 rev=0x00 hdr=0x01 vendor = 'Advanced Micro Devices [AMD]' device = 'RS780/RS880 PCI to PCI bridge (PCIE port 5)' class = bridge subclass = PCI-PCI ahci0@pci0:0:17:0: class=0x01018f card=0x84431043 chip=0x43901002 rev=0x40 hdr=0x00 vendor = 'ATI Technologies Inc' device = 'SB7x0/SB8x0/SB9x0 SATA Controller [IDE mode]' class = mass storage subclass = ATA ohci0@pci0:0:18:0: class=0x0c0310 card=0x84431043 chip=0x43971002 rev=0x00 hdr=0x00 vendor = 'ATI Technologies Inc' device = 'SB7x0/SB8x0/SB9x0 USB OHCI0 Controller' class = serial bus subclass = USB ehci0@pci0:0:18:2: class=0x0c0320 card=0x84431043 chip=0x43961002 rev=0x00 hdr=0x00 vendor = 'ATI Technologies Inc' device = 'SB7x0/SB8x0/SB9x0 USB EHCI Controller' class = serial bus subclass = USB ohci1@pci0:0:19:0: class=0x0c0310 card=0x84431043 chip=0x43971002 rev=0x00 hdr=0x00 vendor = 'ATI Technologies Inc' device = 'SB7x0/SB8x0/SB9x0 USB OHCI0 Controller' class = serial bus subclass = USB ehci1@pci0:0:19:2: class=0x0c0320 card=0x84431043 chip=0x43961002 rev=0x00 hdr=0x00 vendor = 'ATI Technologies Inc' device = 'SB7x0/SB8x0/SB9x0 USB EHCI Controller' class = serial bus subclass = USB none0@pci0:0:20:0: class=0x0c0500 card=0x00000000 chip=0x43851002 rev=0x42 hdr=0x00 vendor = 'ATI Technologies Inc' device = 'SBx00 SMBus Controller' class = serial bus subclass = SMBus atapci0@pci0:0:20:1: class=0x01018a card=0x84431043 chip=0x439c1002 rev=0x40 hdr=0x00 vendor = 'ATI Technologies Inc' device = 'SB7x0/SB8x0/SB9x0 IDE Controller' class = mass storage subclass = ATA hdac1@pci0:0:20:2: class=0x040300 card=0x841b1043 chip=0x43831002 rev=0x40 hdr=0x00 vendor = 'ATI Technologies Inc' device = 'SBx00 Azalia (Intel HDA)' class = multimedia subclass = HDA isab0@pci0:0:20:3: class=0x060100 card=0x84431043 chip=0x439d1002 rev=0x40 hdr=0x00 vendor = 'ATI Technologies Inc' device = 'SB7x0/SB8x0/SB9x0 LPC host controller' class = bridge subclass = PCI-ISA pcib4@pci0:0:20:4: class=0x060401 card=0x00000000 chip=0x43841002 rev=0x40 hdr=0x01 vendor = 'ATI Technologies Inc' device = 'SBx00 PCI to PCI Bridge' class = bridge subclass = PCI-PCI ohci2@pci0:0:20:5: class=0x0c0310 card=0x84431043 chip=0x43991002 rev=0x00 hdr=0x00 vendor = 'ATI Technologies Inc' device = 'SB7x0/SB8x0/SB9x0 USB OHCI2 Controller' class = serial bus subclass = USB ohci3@pci0:0:22:0: class=0x0c0310 card=0x84431043 chip=0x43971002 rev=0x00 hdr=0x00 vendor = 'ATI Technologies Inc' device = 'SB7x0/SB8x0/SB9x0 USB OHCI0 Controller' class = serial bus subclass = USB ehci2@pci0:0:22:2: class=0x0c0320 card=0x84431043 chip=0x43961002 rev=0x00 hdr=0x00 vendor = 'ATI Technologies Inc' device = 'SB7x0/SB8x0/SB9x0 USB EHCI Controller' class = serial bus subclass = USB hostb1@pci0:0:24:0: class=0x060000 card=0x00000000 chip=0x16001022 rev=0x00 hdr=0x00 vendor = 'Advanced Micro Devices [AMD]' device = 'Family 15h Processor Function 0' class = bridge subclass = HOST-PCI hostb2@pci0:0:24:1: class=0x060000 card=0x00000000 chip=0x16011022 rev=0x00 hdr=0x00 vendor = 'Advanced Micro Devices [AMD]' device = 'Family 15h Processor Function 1' class = bridge subclass = HOST-PCI hostb3@pci0:0:24:2: class=0x060000 card=0x00000000 chip=0x16021022 rev=0x00 hdr=0x00 vendor = 'Advanced Micro Devices [AMD]' device = 'Family 15h Processor Function 2' class = bridge subclass = HOST-PCI hostb4@pci0:0:24:3: class=0x060000 card=0x00000000 chip=0x16031022 rev=0x00 hdr=0x00 vendor = 'Advanced Micro Devices [AMD]' device = 'Family 15h Processor Function 3' class = bridge subclass = HOST-PCI hostb5@pci0:0:24:4: class=0x060000 card=0x00000000 chip=0x16041022 rev=0x00 hdr=0x00 vendor = 'Advanced Micro Devices [AMD]' device = 'Family 15h Processor Function 4' class = bridge subclass = HOST-PCI hostb6@pci0:0:24:5: class=0x060000 card=0x00000000 chip=0x16051022 rev=0x00 hdr=0x00 vendor = 'Advanced Micro Devices [AMD]' device = 'Family 15h Processor Function 5' class = bridge subclass = HOST-PCI vgapci0@pci0:1:5:0: class=0x030000 card=0x843e1043 chip=0x97151002 rev=0x00 hdr=0x00 vendor = 'ATI Technologies Inc' device = 'RS880 [Radeon HD 4250]' class = display subclass = VGA hdac0@pci0:1:5:1: class=0x040300 card=0x843e1043 chip=0x970f1002 rev=0x00 hdr=0x00 vendor = 'ATI Technologies Inc' device = 'RS880 Audio Device [Radeon HD 4200]' class = multimedia subclass = HDA xhci0@pci0:2:0:0: class=0x0c0330 card=0x84881043 chip=0x10421b21 rev=0x00 hdr=0x00 vendor = 'ASMedia Technology Inc.' device = 'ASM1042 SuperSpeed USB Host Controller' class = serial bus subclass = USB re0@pci0:3:0:0: class=0x020000 card=0x84321043 chip=0x816810ec rev=0x06 hdr=0x00 vendor = 'Realtek Semiconductor Co., Ltd.' device = 'RTL8111/8168B PCI Express Gigabit Ethernet controller' class = network subclass = ethernet ------------------xorg.conf--------------------------- # Xorg.conf file generated for PC-BSD Section "ServerLayout" Identifier "XFree86 Configured" Screen 0 "Screen0" 0 0 Screen 1 "Screen1" RightOf "Screen0" InputDevice "Mouse0" "CorePointer" InputDevice "Keyboard0" "CoreKeyboard" Option "Clone" "off" Option "AIGLX" "true" EndSection Section "ServerFlags" Option "AutoAddDevices" "Off" Option "Xinerama" "1" Option "AllowEmptyInput" "Off" EndSection Section "Files" ModulePath "/usr/local/lib/xorg/modules" FontPath "/usr/local/lib/X11/fonts/cyrillic/" FontPath "/usr/local/lib/X11/fonts/TrueType/" FontPath "/usr/local/lib/X11/fonts/illinoy/" FontPath "/usr/local/lib/X11/fonts/webfonts/" FontPath "/usr/local/lib/X11/fonts/misc/" FontPath "/usr/local/lib/X11/fonts/OTF/" FontPath "/usr/local/lib/X11/fonts/TTF/" FontPath "/usr/local/lib/X11/fonts/Speedo/" FontPath "/usr/local/lib/X11/fonts/Type1/" FontPath "/usr/local/lib/X11/fonts/CID/" FontPath "/usr/local/lib/X11/fonts/75dpi/" FontPath "/usr/local/lib/X11/fonts/100dpi/" FontPath "/usr/local/lib/X11/fonts/dejavu/" FontPath "/usr/local/lib/X11/fonts/bitstream-vera/" FontPath "/usr/local/lib/X11/fonts/cyrillic/" FontPath "/usr/local/lib/X11/fonts/hebrew/" FontPath "/usr/local/lib/X11/fonts/vietnamese/" FontPath "/usr/local/lib/X11/fonts/indic/" FontPath "/usr/local/lib/X11/fonts/fonts-indic/" FontPath "/usr/local/lib/X11/fonts/ae_fonts1/AAHS" FontPath "/usr/local/lib/X11/fonts/ae_fonts1/AGA" FontPath "/usr/local/lib/X11/fonts/ae_fonts1/FS" FontPath "/usr/local/lib/X11/fonts/ae_fonts1/Kasr" FontPath "/usr/local/lib/X11/fonts/ae_fonts1/MCS" FontPath "/usr/local/lib/X11/fonts/ae_fonts1/Shmookh" FontPath "/usr/local/lib/X11/fonts/local/" FontPath "/usr/local/lib/X11/fonts/util/" EndSection Section "Module" Load "ddc" Load "dbe" Load "dri" Load "dri2" Load "extmod" Load "glx" EndSection Section "InputDevice" Identifier "Keyboard0" Driver "keyboard" Option "XkbModel" "pc105" Option "XkbLayout" "us" Option "XkbVariant" "" EndSection Section "InputDevice" Identifier "Mouse0" Driver "mouse" Option "Protocol" "auto" Option "Device" "/dev/sysmouse" Option "Buttons" "6" Option "ZAxisMapping" "4 5" Option "Emulate3Buttons" EndSection Section "DRI" Mode 0666 EndSection Section "Extensions" Option "Composite" "Enable" EndSection Section "Monitor" Identifier "Monitor0" VendorName "SAM" ModelName "SyncMaster" HorizSync 30.0 - 81.0 VertRefresh 56.0 - 75.0 EndSection Section "Monitor" Identifier "Monitor1" VendorName "SAM" ModelName "SyncMaster" HorizSync 30.0 - 81.0 VertRefresh 56.0 - 75.0 EndSection Section "Device" Identifier "Card0" Screen 0 Driver "radeon" VendorName "ATI Video Driver" # Option "CPPIOMode" "yes" Option "XAANoOffscreenPixmaps" "true" Option "AccelMethod" "EXA" Option "DynamicPM" "on" BusID "PCI:1:5:0" EndSection Section "Device" Identifier "Card1" Screen 1 Driver "radeon" VendorName "ATI Video Driver" # Option "CPPIOMode" "yes" Option "XAANoOffscreenPixmaps" "true" Option "AccelMethod" "EXA" Option "DynamicPM" "on" BusID "PCI:1:5:0" EndSection Section "Screen" Identifier "Screen0" Device "Card0" Monitor "Monitor0" DefaultDepth 24 SubSection "Display" Depth 24 Modes "1280x1024" EndSubSection EndSection Section "Screen" Identifier "Screen1" Device "Card1" Monitor "Monitor1" DefaultDepth 24 SubSection "Display" Depth 24 Modes "1280x1024" EndSubSection EndSection ------------------RC File----------------------------- background_dhclient="YES" compat5x_enable="YES" sshd_enable="NO" devd_enable="YES" devfs_system_ruleset="devfsrules_common" ldconfig_paths="/usr/lib/compat /usr/local/lib /usr/local/kde4/lib /usr/local/lib/compat/pkg" # Disable Sendmail by default sendmail_enable="NONE" # Enable console mouse moused_type="auto" moused_enable="YES" #Enable samba server samba_enable="YES" winbindd_enable="YES" # Disable LPD lpd_enable="NO" # Enable CUPS cupsd_enable="YES" linux_enable="YES" # FSCK Enhancements fsck_y_enable="YES" # Denyhosts Startup denyhosts_enable="YES" # powerd: adaptive speed while on AC power, adaptive while on battery power powerd_enable="YES" powerd_flags="-a hiadaptive -b adaptive" # set CPU frequency # enable HAL / DBUS dbus_enable="YES" hald_enable="YES" # Enables support for HPLIP hpiod_enable="NO" hpssd_enable="NO" # Enable the firewall pf_rules="/etc/pf.conf" pf_enable="YES" pf_flags="" # Enable sound-support snddetect_enable="YES" mixer_enable="YES" # Enable avahi_daemon avahi_daemon_enable="YES" # Run the port jail portjail_enable="YES" # Added for sound support in the portjail, access to /dev/random, /dev/null, etc. jail_pcbsd_devfs_enable="YES" # Start the swapexd daemon swapexd_enable="YES" # Enable IPV6 support ipv6_activate_all_interfaces="YES" # Enable BSDStats bsdstats_enable="YES" # Enable webcamd webcamd_enable="YES" # Disable writing syslogs to remote devices by default syslogd_flags="-c -ss" # Enable pbid pbid_enable="YES" # Enable the gdm display manager gdm_enable="YES" # Enable BlueTooth hcsecd_enable="YES" sdpd_enable="YES" # Load the following kernel modules kld_list="if_bwn if_bwi bwi_v3_ucode bwn_v4_ucode runfw ng_ubt cuse4bsd sem ntfs ntfs_iconv udf udf_iconv ext2fs" # Clean out temporary files. clear_tmp_enable="YES" clean_tmp_X="YES" # Run the pcbsd init service pcbsdinit_enable="YES" # Enable anacron anacron_enable="YES" # Enable fusefs fusefs_enable="YES" ntpd_enable="YES" ntpd_sync_on_start="YES" keymap="us.iso" # Auto-Enabled NICs from pc-sysinstall ifconfig_re0="DHCP" # Auto-Enabled NICs from pc-sysinstall ifconfig_re0_ipv6="inet6 accept_rtadv" hostname="Alice" zfs_enable="YES" ------------------Loader File------------------------- # Kernel Options kern.ipc.shmseg=1024 kern.ipc.shmmni=1024 kern.maxproc=10000 # Accept the firmware license legal.intel_ipw.license_ack=1 legal.intel_iwi.license_ack=1 # Load mmc card-reader support mmc_load="YES" mmcsd_load="YES" # Load additional sata device support siis_load="YES" sdhci_load="YES" # Load support for scd scd_load="YES" # Load geom support geom_journal_load="YES" geom_uzip_load="YES" geom_mirror_load="YES" geom_eli_load="YES" # Load File-System Support libiconv_load="YES" libmchain_load="YES" cd9660_iconv_load="YES" msdosfs_iconv_load="YES" zfs_load="YES" tmpfs_load="YES" # Disable acpi throttle by default, fixes issues with powerd and later AMDs hint.acpi_throttle.0.disabled="1" # Fix crashes on 32bit with Nvidia machdep.disable_mtrrs=1 # Show keystokes for passphrases kern.geom.eli.visible_passphrase=2 # Enable the graphical boot-loader autoboot_delay="12" graphics_enable="YES" beastie_theme="/boot/themes/default/theme.conf" vfs.root.mountfrom="zfs:tank0" ------------------Free Space-------------------------- Filesystem 1M-blocks Used Avail Capacity Mounted on tank0 1833053 229 1832823 0% / devfs 0 0 0 100% /dev /dev/label/boot0 1007 117 809 13% /boot-mount procfs 0 0 0 100% /proc linprocfs 0 0 0 100% /compat/linux/proc tank0/usr 1838304 5480 1832823 0% /usr tank0/var 1832881 57 1832823 0% /var ------------------System Processes-------------------- last pid: 11705; load averages: 0.24, 0.49, 0.31 up 0+00:05:40 14:53:32 116 processes: 2 running, 114 sleeping Mem: 493M Active, 133M Inact, 998M Wired, 6604K Cache, 2816K Buf, 13G Free Swap: 33G Total, 33G Free PID USERNAME THR PRI NICE SIZE RES STATE C TIME WCPU COMMAND 5414 sbruno 1 85 10 14636K 2408K CPU7 7 0:02 12.50% sh 2208 root 1 -21 r31 500M 406M select 2 0:39 3.86% Xorg 4749 root 4 52 0 206M 25464K uwait 1 0:00 0.10% pc-sysmanager 4285 sbruno 19 24 0 567M 151M uwait 3 0:09 0.00% firefox-bin 4336 sbruno 1 20 0 476M 33848K select 0 0:02 0.00% npviewer.bin 2387 sbruno 2 20 0 301M 22388K select 1 0:01 0.00% gnome-panel 4318 sbruno 2 48 0 207M 26104K kqread 4 0:01 0.00% plugin-container 1780 root 1 20 0 12184K 1096K select 1 0:01 0.00% powerd 2452 sbruno 2 20 0 451M 33272K select 2 0:01 0.00% nautilus 4549 sbruno 3 52 0 191M 27488K kqread 1 0:01 0.00% pc-controlpanel 2361 sbruno 2 52 0 239M 18308K select 3 0:00 0.00% metacity 2460 sbruno 2 20 0 236M 20020K select 1 0:00 0.00% wnck-applet 1219 root 1 20 0 14364K 1044K select 4 0:00 0.00% moused 3175 sbruno 3 39 0 233M 19852K piperd 2 0:00 0.00% gnome-terminal 2350 sbruno 2 52 0 326M 16756K select 1 0:00 0.00% gnome-settings-daem 2353 sbruno 1 20 0 22792K 3416K select 0 0:00 0.00% gam_server 2137 haldaemon 2 34 0 57028K 5236K piperd 1 0:00 0.00% hald 2518 sbruno 1 20 0 276M 27744K select 3 0:00 0.00% python2.7