GDB: no debug ports present KDB: debugger backends: ddb KDB: current backend: ddb SMAP type=01 base=0000000000000000 len=0000000000098000 SMAP type=02 base=0000000000098000 len=0000000000008000 SMAP type=02 base=00000000000d2000 len=0000000000002000 SMAP type=02 base=00000000000e4000 len=000000000001c000 SMAP type=01 base=0000000000100000 len=00000000cfe7c000 SMAP type=04 base=00000000cff7c000 len=0000000000004000 SMAP type=02 base=00000000cff80000 len=0000000000080000 SMAP type=02 base=00000000e0000000 len=0000000010000000 SMAP type=02 base=00000000fec00000 len=0000000000010000 SMAP type=02 base=00000000fee00000 len=0000000000001000 SMAP type=02 base=00000000ff800000 len=0000000000400000 SMAP type=02 base=00000000fffffc00 len=0000000000000400 SMAP type=01 base=0000000100000000 len=0000000130000000 4980736K of memory above 4GB ignored MP Configuration Table version 1.4 found at 0xc00988a0 ACPI BIOS Bug: Error: A valid RSDP was not found (20130214/tbxfroot-235) APIC: Using the MPTable enumerator. SMP: Added CPU 0 (BSP) SMP: Added CPU 6 (AP) SMP: Added CPU 1 (AP) SMP: Added CPU 7 (AP) Copyright (c) 1992-2013 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 10.0-CURRENT #0 r248619+58a95d1: Fri Mar 22 14:14:58 EDT 2013 rstone@wtllab-bsdbuild-4.phaedrus.sandvine.com:/usr/d2/users/rstone/git/obj/bisection/usr/d2/users/rstone/git/svos/sys/GENERIC i386 FreeBSD clang version 3.2 (tags/RELEASE_32/final 170710) 20121221 WARNING: WITNESS option enabled, expect reduced performance. Preloaded elf kernel "/boot/kernel/kernel" at 0xc16b3000. Calibrating TSC clock ... TSC clock: 3200172064 Hz CPU: Intel(R) Xeon(TM) CPU 3.20GHz (3200.17-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0xf43 Family = 0xf Model = 0x4 Stepping = 3 Features=0xbfebfbff Features2=0x641d AMD Features=0x20100000 TSC: P-state invariant Instruction TLB: 4 KB, 2 MB or 4 MB pages, fully associative, 64 entries Data TLB: 4 KB or 4 MB pages, fully associative, 64 entries 1st-level data cache: 16 KB, 8-way set associative, sectored cache, 64 byte line size Trace cache: 12K-uops, 8-way set associative 2nd-level cache: 2-MB, 8-way set associative, 64-byte line size L2 cache: 2048 kbytes, 8-way associative, 64 bytes/line real memory = 8589934592 (8192 MB) Physical memory chunk(s): 0x0000000000001000 - 0x0000000000096fff, 614400 bytes (150 pages) 0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages) 0x0000000001826000 - 0x00000000ccb02fff, 3408777216 bytes (832221 pages) avail memory = 3366940672 (3210 MB) MPTable: Event timer "LAPIC" quality 400 INTR: Adding local APIC 6 as a target FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs FreeBSD/SMP: 2 package(s) x 1 core(s) x 2 HTT threads cpu0 (BSP): APIC ID: 0 cpu1 (AP/HT): APIC ID: 1 cpu2 (AP): APIC ID: 6 cpu3 (AP/HT): APIC ID: 7 bios32: Found BIOS32 Service Directory header at 0xc00f6830 bios32: Entry = 0xfd470 (c00fd470) Rev = 0 Len = 1 pcibios: PCI BIOS entry at 0xfd470+0x3c0 pnpbios: Found PnP BIOS data at 0xc00f6890 pnpbios: Entry = f0000:b42b Rev = 1.0 Other BIOS signatures found: random device not loaded; using insecure entropy ULE: setup cpu 0 ULE: setup cpu 1 ULE: setup cpu 2 ULE: setup cpu 3 ioapic0: Assuming intbase of 0 ioapic0: Routing external 8259A's -> intpin 0 ioapic1: Assuming intbase of 24 ioapic2: Assuming intbase of 48 ioapic3: Assuming intbase of 72 ioapic4: Assuming intbase of 96 ioapic0: Routing IRQ 0 -> intpin 2 lapic: Routing ExtINT -> LINT0 lapic: LINT0 trigger: edge lapic: LINT0 polarity: high lapic: Routing NMI -> LINT1 lapic: LINT1 trigger: edge lapic: LINT1 polarity: high ioapic0 irqs 0-23 on motherboard ioapic1 irqs 24-47 on motherboard ioapic2 irqs 48-71 on motherboard ioapic3 irqs 72-95 on motherboard ioapic4 irqs 96-119 on motherboard cpu0 BSP: ID: 0x00000000 VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff timer: 0x000100ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400 wlan: <802.11 Link Layer> snd_unit_init() u=0x00ff8000 [512] d=0x00007c00 [32] c=0x000003ff [1024] feeder_register: snd_unit=-1 snd_maxautovchans=16 latency=5 feeder_rate_min=1 feeder_rate_max=2016000 feeder_rate_round=25 kbd: new array size 4 kbd1 at kbdmux0 mem: Pentium Pro MTRR support enabled nfslock: pseudo-device null: VESA: INT 0x10 vector 0xc000:0x1471 VESA: information block 0000 56 45 53 41 00 02 00 01 00 01 00 00 00 00 22 00 0010 00 01 7f 00 00 01 0b 01 00 01 21 01 00 01 2a 01 0020 00 01 00 01 01 01 10 01 11 01 12 01 03 01 13 01 0030 14 01 15 01 05 01 16 01 17 01 18 01 07 01 19 01 0040 1a 01 1b 01 02 03 03 03 04 03 02 02 0d 01 0e 01 0050 0f 01 12 02 13 02 14 02 15 02 22 02 23 02 24 02 0060 25 02 32 02 33 02 34 02 35 02 42 02 43 02 44 02 0070 45 02 0b 01 0c 01 ff ff 00 00 00 00 00 00 00 00 0080 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0090 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00a0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00b0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00c0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00d0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00e0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00f0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0100 41 54 49 20 4d 41 43 48 36 34 00 41 54 49 20 54 0110 65 63 68 6e 6f 6c 6f 67 69 65 73 20 49 6e 63 2e 0120 00 4d 41 43 48 36 34 47 4d 00 30 31 2e 30 30 00 0130 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0140 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0150 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0160 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0170 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0180 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0190 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 01a0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 01b0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 01c0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 01d0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 01e0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 01f0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 VESA: 42 mode(s) found VESA: v2.0, 8128k memory, flags:0x0, mode table:0xc7393022 (1000022) VESA: ATI MACH64 VESA: ATI Technologies Inc. MACH64GM 01.00 io: random: hpt27xx: RocketRAID 27xx controller driver v1.0 hptrr: RocketRAID 17xx/2xxx SATA controller driver v1.2 ACPI BIOS Bug: Error: A valid RSDP was not found (20130214/tbxfroot-235) ACPI: Table initialisation failed: AE_NOT_FOUND ACPI: Try disabling either ACPI or apic support. pci_open(1): mode 1 addr port (0x0cf8) is 0x8003102c pci_open(1a): mode1res=0x80000000 (0x80000000) pci_cfgcheck: device 0 [class=060000] [hdr=80] is there (id=35908086) pcibios: BIOS version 2.10 PCIe: Memory Mapped configuration base @ 0xe0000000 pcib0: pcibus 0 on motherboard pci0: on pcib0 pci0: domain=0, physical bus=0 found-> vendor=0x8086, dev=0x3590, revid=0x0c domain=0, bus=0, slot=0, func=0 class=06-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0106, statreg=0x0090, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x3591, revid=0x0c domain=0, bus=0, slot=0, func=1 class=ff-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0100, statreg=0x0000, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x3594, revid=0x0c domain=0, bus=0, slot=1, func=0 class=08-80-00, hdrtype=0x00, mfdev=0 cmdreg=0x0102, statreg=0x0010, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=5 MSI supports 2 messages map[10]: type Memory, range 32, base 0xdd000000, size 12, enabled pcib0: slot 1 INTA routed to irq 16 found-> vendor=0x8086, dev=0x3595, revid=0x0c domain=0, bus=0, slot=2, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0107, statreg=0x0010, cachelnsz=8 (dwords) lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns) intpin=a, irq=5 powerspec 2 supports D0 D3 current D0 MSI supports 2 messages pcib0: slot 2 INTA routed to irq 16 found-> vendor=0x8086, dev=0x3597, revid=0x0c domain=0, bus=0, slot=4, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0107, statreg=0x4018, cachelnsz=8 (dwords) lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns) intpin=a, irq=5 powerspec 2 supports D0 D3 current D0 MSI supports 2 messages pcib0: slot 4 INTA routed to irq 16 found-> vendor=0x8086, dev=0x3599, revid=0x0c domain=0, bus=0, slot=6, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0107, statreg=0x0010, cachelnsz=8 (dwords) lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns) intpin=a, irq=5 powerspec 2 supports D0 D3 current D0 MSI supports 2 messages pcib0: slot 6 INTA routed to irq 16 found-> vendor=0x8086, dev=0x244e, revid=0xc2 domain=0, bus=0, slot=30, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0107, statreg=0x0080, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x0c (3000 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x24d0, revid=0x02 domain=0, bus=0, slot=31, func=0 class=06-01-00, hdrtype=0x00, mfdev=1 cmdreg=0x010f, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x24d3, revid=0x02 domain=0, bus=0, slot=31, func=3 class=0c-05-00, hdrtype=0x00, mfdev=0 cmdreg=0x0001, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=10 map[20]: type I/O Port, range 32, base 0x1100, size 5, enabled pcib0: slot 31 INTB routed to irq 17 pci0: at device 0.1 (no driver attached) pci0: at device 1.0 (no driver attached) pcib1: irq 16 at device 2.0 on pci0 pcib1: domain 0 pcib1: secondary bus 1 pcib1: subordinate bus 3 pcib1: I/O decode 0x2000-0x2fff pcib1: memory decode 0xdd100000-0xdd5fffff pcib1: no prefetched decode pci1: on pcib1 pci1: domain=0, physical bus=1 found-> vendor=0x8086, dev=0x0329, revid=0x09 domain=0, bus=1, slot=0, func=0 class=06-04-00, hdrtype=0x01, mfdev=1 cmdreg=0x0107, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns) powerspec 2 supports D0 D3 current D0 MSI supports 1 message, 64 bit found-> vendor=0x8086, dev=0x0326, revid=0x09 domain=0, bus=1, slot=0, func=1 class=08-00-20, hdrtype=0x00, mfdev=1 cmdreg=0x0106, statreg=0x0010, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) powerspec 2 supports D0 D3 current D0 map[10]: type Memory, range 32, base 0xdd100000, size 12, enabled pcib1: allocated memory range (0xdd100000-0xdd100fff) for rid 10 of pci0:1:0:1 found-> vendor=0x8086, dev=0x032a, revid=0x09 domain=0, bus=1, slot=0, func=2 class=06-04-00, hdrtype=0x01, mfdev=1 cmdreg=0x0107, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns) powerspec 2 supports D0 D3 current D0 MSI supports 1 message, 64 bit found-> vendor=0x8086, dev=0x0327, revid=0x09 domain=0, bus=1, slot=0, func=3 class=08-00-20, hdrtype=0x00, mfdev=1 cmdreg=0x0106, statreg=0x0010, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) powerspec 2 supports D0 D3 current D0 map[10]: type Memory, range 32, base 0xdd101000, size 12, enabled pcib1: allocated memory range (0xdd101000-0xdd101fff) for rid 10 of pci0:1:0:3 pcib2: at device 0.0 on pci1 pcib2: domain 0 pcib2: secondary bus 2 pcib2: subordinate bus 2 pcib2: no prefetched decode pci2: on pcib2 pci2: domain=0, physical bus=2 pcib3: at device 0.2 on pci1 pcib1: allocated I/O port range (0x2000-0x2fff) for rid 1c of pcib3 pcib1: allocated memory range (0xdd200000-0xdd5fffff) for rid 20 of pcib3 pcib3: domain 0 pcib3: secondary bus 3 pcib3: subordinate bus 3 pcib3: I/O decode 0x2000-0x2fff pcib3: memory decode 0xdd200000-0xdd5fffff pcib3: no prefetched decode pci3: on pcib3 pci3: domain=0, physical bus=3 found-> vendor=0x9005, dev=0x0286, revid=0x03 domain=0, bus=3, slot=1, func=0 class=01-04-00, hdrtype=0x00, mfdev=0 cmdreg=0x011e, statreg=0x0230, cachelnsz=8 (dwords) lattimer=0x20 (960 ns), mingnt=0x01 (250 ns), maxlat=0x01 (250 ns) intpin=a, irq=5 powerspec 2 supports D0 D1 D2 D3 current D0 MSI supports 2 messages, 64 bit map[10]: type Memory, range 64, base 0xdd400000, size 21, enabled pcib3: allocated memory range (0xdd400000-0xdd5fffff) for rid 10 of pci0:3:1:0 map[18]: type Memory, range 64, base 0xdd200000, size 12, enabled pcib3: allocated memory range (0xdd200000-0xdd200fff) for rid 18 of pci0:3:1:0 pcib3: slot 1 INTA routed to irq 48 found-> vendor=0x8086, dev=0x1079, revid=0x03 domain=0, bus=3, slot=2, func=0 class=02-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0117, statreg=0x0230, cachelnsz=8 (dwords) lattimer=0x40 (1920 ns), mingnt=0xff (63750 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 powerspec 2 supports D0 D3 current D0 MSI supports 1 message, 64 bit map[10]: type Memory, range 64, base 0xdd220000, size 17, enabled pcib3: allocated memory range (0xdd220000-0xdd23ffff) for rid 10 of pci0:3:2:0 map[20]: type I/O Port, range 32, base 0x2000, size 6, enabled pcib3: allocated I/O port range (0x2000-0x203f) for rid 20 of pci0:3:2:0 pcib3: slot 2 INTA routed to irq 54 found-> vendor=0x8086, dev=0x1079, revid=0x03 domain=0, bus=3, slot=2, func=1 class=02-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0117, statreg=0x0230, cachelnsz=8 (dwords) lattimer=0x40 (1920 ns), mingnt=0xff (63750 ns), maxlat=0x00 (0 ns) intpin=b, irq=7 powerspec 2 supports D0 D3 current D0 MSI supports 1 message, 64 bit map[10]: type Memory, range 64, base 0xdd240000, size 17, enabled pcib3: allocated memory range (0xdd240000-0xdd25ffff) for rid 10 of pci0:3:2:1 map[20]: type I/O Port, range 32, base 0x2040, size 6, enabled pcib3: allocated I/O port range (0x2040-0x207f) for rid 20 of pci0:3:2:1 pcib3: slot 2 INTB routed to irq 55 aac0: mem 0xdd400000-0xdd5fffff,0xdd200000-0xdd200fff irq 48 at device 1.0 on pci3 aac0: attempting to allocate 1 MSI vectors (2 supported) msi: routing MSI IRQ 256 to local APIC 0 vector 48 aac0: using IRQ 256 for MSI aac0: Enable Raw I/O aac0: Enable 64-bit array aac0: New comm. interface enabled aac0: MIPS 5KC 200MHz, 128MB memory (111MB cache, 17MB execution), optional battery present aac0: Kernel 5.2-0, Build 15619, S/N 269C75 aac0: Supported Options=171d7d aac0: Adaptec 2230S, aac driver 2.1.9-1 aacp0 on aac0 aacp1 on aac0 em0: port 0x2000-0x203f mem 0xdd220000-0xdd23ffff irq 54 at device 2.0 on pci3 ioapic2: routing intpin 6 (PCI IRQ 54) to lapic 0 vector 49 em0: bpf attached em0: Ethernet address: 00:30:48:77:9a:0c em1: port 0x2040-0x207f mem 0xdd240000-0xdd25ffff irq 55 at device 2.1 on pci3 ioapic2: routing intpin 7 (PCI IRQ 55) to lapic 0 vector 50 em1: bpf attached em1: Ethernet address: 00:30:48:77:9a:0d pcib4: irq 16 at device 4.0 on pci0 pcib4: domain 0 pcib4: secondary bus 4 pcib4: subordinate bus 4 pcib4: no prefetched decode pci4: on pcib4 pci4: domain=0, physical bus=4 pcib5: irq 16 at device 6.0 on pci0 pcib5: domain 0 pcib5: secondary bus 5 pcib5: subordinate bus 7 pcib5: memory decode 0xdd600000-0xdd6fffff pcib5: no prefetched decode pci5: on pcib5 pci5: domain=0, physical bus=5 found-> vendor=0x8086, dev=0x0329, revid=0x09 domain=0, bus=5, slot=0, func=0 class=06-04-00, hdrtype=0x01, mfdev=1 cmdreg=0x0107, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns) powerspec 2 supports D0 D3 current D0 MSI supports 1 message, 64 bit found-> vendor=0x8086, dev=0x0326, revid=0x09 domain=0, bus=5, slot=0, func=1 class=08-00-20, hdrtype=0x00, mfdev=1 cmdreg=0x0106, statreg=0x0010, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) powerspec 2 supports D0 D3 current D0 map[10]: type Memory, range 32, base 0xdd600000, size 12, enabled pcib5: allocated memory range (0xdd600000-0xdd600fff) for rid 10 of pci0:5:0:1 found-> vendor=0x8086, dev=0x032a, revid=0x09 domain=0, bus=5, slot=0, func=2 class=06-04-00, hdrtype=0x01, mfdev=1 cmdreg=0x0107, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns) powerspec 2 supports D0 D3 current D0 MSI supports 1 message, 64 bit found-> vendor=0x8086, dev=0x0327, revid=0x09 domain=0, bus=5, slot=0, func=3 class=08-00-20, hdrtype=0x00, mfdev=1 cmdreg=0x0106, statreg=0x0010, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) powerspec 2 supports D0 D3 current D0 map[10]: type Memory, range 32, base 0xdd601000, size 12, enabled pcib5: allocated memory range (0xdd601000-0xdd601fff) for rid 10 of pci0:5:0:3 pcib6: at device 0.0 on pci5 pcib6: domain 0 pcib6: secondary bus 6 pcib6: subordinate bus 6 pcib6: no prefetched decode pci6: on pcib6 pci6: domain=0, physical bus=6 pcib7: at device 0.2 on pci5 pcib7: domain 0 pcib7: secondary bus 7 pcib7: subordinate bus 7 pcib7: no prefetched decode pci7: on pcib7 pci7: domain=0, physical bus=7 pcib8: at device 30.0 on pci0 pcib8: domain 0 pcib8: secondary bus 8 pcib8: subordinate bus 8 pcib8: I/O decode 0x3000-0x3fff pcib8: memory decode 0xdd700000-0xdeffffff pcib8: no prefetched decode pcib8: Subtractively decoded bridge. pci8: on pcib8 pci8: domain=0, physical bus=8 found-> vendor=0x1002, dev=0x4752, revid=0x27 domain=0, bus=8, slot=1, func=0 class=03-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0087, statreg=0x0290, cachelnsz=8 (dwords) lattimer=0x42 (1980 ns), mingnt=0x08 (2000 ns), maxlat=0x00 (0 ns) intpin=a, irq=10 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type Memory, range 32, base 0xde000000, size 24, enabled pcib8: allocated memory range (0xde000000-0xdeffffff) for rid 10 of pci0:8:1:0 map[14]: type I/O Port, range 32, base 0x3000, size 8, enabled pcib8: allocated I/O port range (0x3000-0x30ff) for rid 14 of pci0:8:1:0 map[18]: type Memory, range 32, base 0xdd700000, size 12, enabled pcib8: allocated memory range (0xdd700000-0xdd700fff) for rid 18 of pci0:8:1:0 pcib8: slot 1 INTA routed to irq 17 vgapci0: port 0x3000-0x30ff mem 0xde000000-0xdeffffff,0xdd700000-0xdd700fff irq 17 at device 1.0 on pci8 isab0: at device 31.0 on pci0 isa0: on isab0 pci0: at device 31.3 (no driver attached) cpu0 on motherboard p4tcc0: on cpu0 cpu1 on motherboard p4tcc1: on cpu1 cpu2 on motherboard p4tcc2: on cpu2 cpu3 on motherboard p4tcc3: on cpu3 ex_isa_identify() ahc_isa_probe 0: ioport 0xc00 alloc failed ahc_isa_probe 1: ioport 0x1c00 alloc failed ahc_isa_probe 2: ioport 0x2c00 alloc failed ahc_isa_probe 3: ioport 0x3c00 alloc failed ahc_isa_probe 4: ioport 0x4c00 alloc failed ahc_isa_probe 5: ioport 0x5c00 alloc failed ahc_isa_probe 6: ioport 0x6c00 alloc failed ahc_isa_probe 7: ioport 0x7c00 alloc failed ahc_isa_probe 8: ioport 0x8c00 alloc failed ahc_isa_probe 9: ioport 0x9c00 alloc failed ahc_isa_probe 10: ioport 0xac00 alloc failed ahc_isa_probe 11: ioport 0xbc00 alloc failed ahc_isa_probe 12: ioport 0xcc00 alloc failed ahc_isa_probe 13: ioport 0xdc00 alloc failed ahc_isa_probe 14: ioport 0xec00 alloc failed pnp_identify: Trying Read_Port at 203 pnp_identify: Trying Read_Port at 243 pnp_identify: Trying Read_Port at 283 pnp_identify: Trying Read_Port at 2c3 pnp_identify: Trying Read_Port at 303 pnp_identify: Trying Read_Port at 343 pnp_identify: Trying Read_Port at 383 pnp_identify: Trying Read_Port at 3c3 PNP Identify complete pnpbios: 20 devices, largest 234 bytes PNP0c02: adding io range 0x10-0x1f, size=0x10, align=0x1 PNP0c02: adding io range 0x24-0x25, size=0x2, align=0x1 PNP0c02: adding io range 0x28-0x29, size=0x2, align=0x1 PNP0c02: adding io range 0x2c-0x2d, size=0x2, align=0x1 PNP0c02: adding io range 0x30-0x31, size=0x2, align=0x1 PNP0c02: adding io range 0x34-0x35, size=0x2, align=0x1 PNP0c02: adding io range 0x38-0x39, size=0x2, align=0x1 PNP0c02: adding io range 0x3c-0x3d, size=0x2, align=0x1 PNP0c02: adding io range 0x50-0x53, size=0x4, align=0x1 PNP0c02: adding io range 0x72-0x73, size=0x2, align=0x1 PNP0c02: adding io range 0x74-0x75, size=0x2, align=0x1 PNP0c02: adding io range 0x76-0x77, size=0x2, align=0x1 PNP0c02: adding io range 0x80-0x80, size=0x1, align=0x1 PNP0c02: adding io range 0x90-0x91, size=0x2, align=0x1 PNP0c02: adding io range 0x92-0x92, size=0x1, align=0x1 PNP0c02: adding io range 0x93-0x9f, size=0xd, align=0x1 PNP0c02: adding io range 0xa4-0xa5, size=0x2, align=0x1 PNP0c02: adding io range 0xa8-0xa9, size=0x2, align=0x1 PNP0c02: adding io range 0xac-0xad, size=0x2, align=0x1 PNP0c02: adding io range 0xb0-0xb1, size=0x2, align=0x1 PNP0c02: adding io range 0xb2-0xb3, size=0x2, align=0x1 PNP0c02: adding io range 0xb4-0xb5, size=0x2, align=0x1 PNP0c02: adding io range 0xb8-0xb9, size=0x2, align=0x1 PNP0c02: adding io range 0xbc-0xbd, size=0x2, align=0x1 PNP0c02: adding fixed memory32 range 0xfebffc00-0xfebfffff, size=0x400 PNP0c02: adding fixed memory32 range 0xfff00000-0xffffffff, size=0x100000 pnpbios: handle 0 device ID PNP0c02 (020cd041) PNP0c02: adding fixed memory32 range 0xfee00000-0xfee00fff, size=0x1000 pnpbios: handle 1 device ID PNP0c02 (020cd041) PNP0c01: adding fixed memory32 range 0xe4000-0xfffff, size=0x1c000 PNP0c01: adding fixed memory32 range 0x100000-0xffffffff, size=0xfff00000 pnpbios: handle 2 device ID PNP0c01 (010cd041) PNP0200: adding io range 0-0xf, size=0x10, align=0x1 PNP0200: adding io range 0x81-0x8f, size=0xf, align=0x1 PNP0200: adding io range 0xc0-0xdf, size=0x20, align=0x1 PNP0200: adding dma mask 0x10 pnpbios: handle 3 device ID PNP0200 (0002d041) PNP0100: adding io range 0x40-0x43, size=0x4, align=0x1 PNP0100: adding irq mask 0x1 pnpbios: handle 5 device ID PNP0100 (0001d041) PNP0b00: adding io range 0x70-0x71, size=0x2, align=0x1 PNP0b00: adding irq mask 0x100 pnpbios: handle 6 device ID PNP0b00 (000bd041) PNP0303: adding io range 0x60-0x60, size=0x1, align=0x1 PNP0303: adding io range 0x64-0x64, size=0x1, align=0x1 PNP0303: adding irq mask 0x2 pnpbios: handle 7 device ID PNP0303 (0303d041) PNP0c04: adding io range 0xf0-0xff, size=0x10, align=0x1 PNP0c04: adding irq mask 0x2000 pnpbios: handle 8 device ID PNP0c04 (040cd041) PNP0800: adding io range 0x61-0x61, size=0x1, align=0x1 pnpbios: handle 9 device ID PNP0800 (0008d041) pnpbios: handle 10 device ID PNP0c02 (020cd041) PNP0a03: adding io range 0xcf8-0xcff, size=0x8, align=0x1 pnpbios: handle 11 device ID PNP0a03 (030ad041) PNP0c02: adding fixed memory32 range 0xd0800-0xd3fff, size=0x3800 pnpbios: handle 12 device ID PNP0c02 (020cd041) PNP0c02: adding memory32 range 0x9c000-0x9ffff, size=0x4000, align=0x4000 pnpbios: handle 13 device ID PNP0c02 (020cd041) PNP0c02: adding io range 0x4d0-0x4d1, size=0x2, align=0x1 PNP0c02: adding io range 0x1000-0x105f, size=0x60, align=0x1 PNP0c02: adding io range 0x1060-0x107f, size=0x20, align=0x1 PNP0c02: adding io range 0x1180-0x11bf, size=0x40, align=0x1 PNP0c02: adding fixed memory32 range 0xfed00000-0xfed033ff, size=0x3400 PNP0c02: adding fixed memory32 range 0xfed20000-0xfed8ffff, size=0x70000 PNP0c02: adding fixed memory32 range 0xfec00000-0xfec003ff, size=0x400 pnpbios: handle 14 device ID PNP0c02 (020cd041) INT0800: adding fixed memory32 range 0xffb80000-0xffbfffff, size=0x80000 INT0800: adding fixed memory32 range 0xffb00000-0xffb7ffff, size=0x80000 INT0800: adding fixed memory32 range 0xffa80000-0xffafffff, size=0x80000 INT0800: adding fixed memory32 range 0xffa00000-0xffa7ffff, size=0x80000 INT0800: adding fixed memory32 range 0xff980000-0xff9fffff, size=0x80000 INT0800: adding fixed memory32 range 0xff900000-0xff97ffff, size=0x80000 INT0800: adding fixed memory32 range 0xff880000-0xff8fffff, size=0x80000 INT0800: adding fixed memory32 range 0xff800000-0xff87ffff, size=0x80000 INT0800: adding fixed memory32 range 0xff000000-0xff7fffff, size=0x800000 pnpbios: handle 15 device ID INT0800 (0008d425) PNP0f13: adding irq mask 0x1000 pnpbios: handle 16 device ID PNP0f13 (130fd041) PNP0501: adding io range 0x3f8-0x3ff, size=0x8, align=0x8 PNP0501: adding irq mask 0x10 pnpbios: handle 17 device ID PNP0501 (0105d041) PNP0501: adding io range 0x2f8-0x2ff, size=0x8, align=0x8 PNP0501: adding irq mask 0x8 pnpbios: handle 18 device ID PNP0501 (0105d041) pnpbios: handle 19 device ID PNP0700 (0007d041) isa_probe_children: disabling PnP devices pmtimer0 on isa0 unknown: can't assign resources (memory) unknown: at iomem 0xfebffc00-0xfebfffff pnpid PNP0c02 on isa0 unknown: can't assign resources (memory) unknown: at iomem 0xfee00000-0xfee00fff pnpid PNP0c02 on isa0 unknown: can't assign resources (memory) unknown: at iomem 0xe4000-0xfffff pnpid PNP0c01 on isa0 attimer0: at port 0x40-0x43 irq 0 pnpid PNP0100 on isa0 Timecounter "i8254" frequency 1193182 Hz quality 0 ioapic0: routing intpin 2 (ISA IRQ 0) to lapic 0 vector 51 Event timer "i8254" frequency 1193182 Hz quality 100 atrtc0: at port 0x70-0x71 irq 8 pnpid PNP0b00 on isa0 atrtc0: registered as a time-of-day clock (resolution 1000000us, adjustment 0.500000000s) ioapic0: routing intpin 8 (ISA IRQ 8) to lapic 0 vector 52 Event timer "RTC" frequency 32768 Hz quality 0 atkbdc0: at port 0x60,0x64 irq 1 pnpid PNP0303 on isa0 atkbd0: irq 1 on atkbdc0 kbd0 at atkbd0 kbd0: atkbd0, generic (0), config:0x0, flags:0x1f0000 ioapic0: routing intpin 1 (ISA IRQ 1) to lapic 0 vector 53 atkbd0: [GIANT-LOCKED] psm0: unable to allocate IRQ (null) failed to probe at port 0x61 pnpid PNP0800 on isa0 unknown: can't assign resources (memory) unknown: at iomem 0xfed00000-0xfed033ff,0xfed20000-0xfed8ffff,0xfec00000-0xfec003ff pnpid PNP0c02 on isa0 (null) failed to probe at iomem 0xffb80000-0xffbfffff,0xffb00000-0xffb7ffff,0xffa80000-0xffafffff,0xffa00000-0xffa7ffff,0xff980000-0xff9fffff,0xff900000-0xff97ffff,0xff880000-0xff8fffff,0xff800000-0xff87ffff,0xff000000-0xff7fffff pnpid INT0800 on isa0 psmcpnp0: at irq 12 pnpid PNP0f13 on isa0 psm0: current command byte:0047 kbdc: TEST_AUX_PORT status:0000 kbdc: RESET_AUX return code:00fe kbdc: RESET_AUX return code:00fe kbdc: RESET_AUX return code:00fe kbdc: DIAGNOSE status:0055 kbdc: TEST_KBD_PORT status:0000 psm0: failed to reset the aux device. uart0: <16550 or compatible> at port 0x3f8-0x3ff irq 4 flags 0x10 pnpid PNP0501 on isa0 ioapic0: routing intpin 4 (ISA IRQ 4) to lapic 0 vector 54 uart0: fast interrupt uart0: console (115200,n,8,1) uart1: <16550 or compatible> at port 0x2f8-0x2ff irq 3 pnpid PNP0501 on isa0 ioapic0: routing intpin 3 (ISA IRQ 3) to lapic 0 vector 55 uart1: fast interrupt fdc1: No FDOUT register! (null) failed to probe pnpid PNP0700 on isa0 atkbdc: atkbdc0 already exists; skipping it atrtc: atrtc0 already exists; skipping it attimer: attimer0 already exists; skipping it sc: sc0 already exists; skipping it uart: uart0 already exists; skipping it uart: uart1 already exists; skipping it isa_probe_children: probing non-PnP devices orm0: at iomem 0xc0000-0xc7fff,0xc8000-0xc8fff,0xc9000-0xc9fff,0xca000-0xcafff,0xcb000-0xd07ff pnpid ORM0000 on isa0 sc0: at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x100> sc0: fb0, kbd1, terminal emulator: scteken (teken terminal) vga0: at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 ata0: at port 0x1f0-0x1f7,0x3f6 irq 14 on isa0 ioapic0: routing intpin 14 (ISA IRQ 14) to lapic 0 vector 56 ata1: at port 0x170-0x177,0x376 irq 15 on isa0 ioapic0: routing intpin 15 (ISA IRQ 15) to lapic 0 vector 57 fdc0 failed to probe at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 ppc0: parallel port not found. ppc0 failed to probe at irq 7 on isa0 wbwd0 failed to probe on isa0 isa_probe_children: probing PnP devices unknown: can't assign resources (memory) unknown: at iomem 0xfebffc00-0xfebfffff pnpid PNP0c02 on isa0 unknown: can't assign resources (memory) unknown: at iomem 0xfee00000-0xfee00fff pnpid PNP0c02 on isa0 unknown: can't assign resources (memory) unknown: at iomem 0xe4000-0xfffff pnpid PNP0c01 on isa0 unknown: can't assign resources (memory) unknown: at iomem 0xfed00000-0xfed033ff,0xfed20000-0xfed8ffff,0xfec00000-0xfec003ff pnpid PNP0c02 on isa0 fdc1: No FDOUT register! Device configuration finished. procfs registered lapic: Divisor 2, Frequency 100005440 Hz Timecounters tick every 1.000 msec vlan: initialized, using hash tables with chaining tcp_init: net.inet.tcp.tcbhashsize auto tuned to 32768 lo0: bpf attached hpt27xx: no controller detected. hptrr: no controller detected. aacd0 on aac0 aacd0: 140099MB (286922752 sectors) aacd1 on aac0 aacd1: 1541111MB (3156195328 sectors) GEOM: new disk aacd0 GEOM: new disk aacd1 ata0: reset tp1 mask=00 ostat0=ff ostat1=ff ata1: reset tp1 mask=00 ostat0=ff ostat1=ff [-- MARK -- Fri Mar 22 15:05:00 2013] run_interrupt_driven_hooks: still waiting after 60 seconds for xpt_config [-- MARK -- Fri Mar 22 15:06:00 2013] run_interrupt_driven_hooks: still waiting after 120 seconds for xpt_config aac0: COMMAND 0xc786c140 (TYPE 600) TIMEOUT AFTER 140 SECONDS aac0: COMMAND 0xc786c1c0 (TYPE 600) TIMEOUT AFTER 140 SECONDS aac0: COMMAND 0xc786c240 (TYPE 502) TIMEOUT AFTER 140 SECONDS [-- MARK -- Fri Mar 22 15:07:00 2013] run_interrupt_driven_hooks: still waiting after 180 seconds for xpt_config [-- MARK -- Fri Mar 22 15:08:00 2013] run_interrupt_driven_hooks: still waiting after 240 seconds for xpt_config [-- MARK -- Fri Mar 22 15:09:00 2013] run_interrupt_driven_hooks: still waiting after 300 seconds for xpt_config [-- MARK -- Fri Mar 22 15:10:00 2013] panic: run_interrupt_driven_config_hooks: waited too long cpuid = 0 KDB: enter: panic [ thread pid 0 tid 100000 ] Stopped at kdb_enter+0x3d: movl $0,kdb_why db> [-- MARK -- Fri Mar 22 15:11:00 2013] [-- MARK -- Fri Mar 22 15:12:00 2013]