startRedirect2 - TBD
Router Only
startRedirect2.seq [-tooloption ...] -p startRedirect2.def
The initialization configures NUT as the followings:
- Assign "3ffe:501:ffff:108:200:ff:fe00:a0a0" to the i/f specified as Link0.
- Set the route 3ffe:501:ffff:109::/64 to R1's global (3ffe:501:ffff:100:200:ff:fe00:a1a1).
[NUT]
| 3ffe:501:ffff:100::ifid
| 3ffe:501:ffff:108:200:ff:fe00:a0a0
| default route to R1's global
| 3ffe:501:ffff:100/64
---+----+----+------------------------------------+-------- 3ffe:501:ffff:108/64
| | |
| | 3ffe:501:ffff:100:200:ff:fe00:a1a1 | 3ffe:501:ffff:100:200:ff:fe00:a2a2
| | 3ffe:501:ffff:108:200:ff:fe00:a1a1 | 3ffe:501:ffff:108:200:ff:fe00:a2a2
[TN] [R1] [H2]
|
|
------+------ 3ffe:501:ffff:109/64
|
| 3ffe:501:ffff:109:200:ff:fe00:a3a3
[H3]
Initialization sequences:
- Set a global address (3ffe:501:ffff:108:200:ff:fe00:a0a0) on the NUT's interface.
- Wait for DAD NS if any.
- Set a route (3ffe:501:ffff:109::/64) to R1 's global address (3ffe:501:ffff:100:200:ff:fe00:a1a1)
on the NUT's routing table.
- Wait for NSs if any.
- Send a solicited NA w/ SLL.
It is ok if the NUT does not create related neighbor cache entry
because the following tests create the neighbor cache by themselves.
Is is meaningless in almost case.
N/A
N/A
N/A
TBD
perldoc V6evalTool
perldoc V6evalRemote