Copyright (c) 1992-2009 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 8.0-CURRENT #32 r186740M: Sun Jan 4 10:37:44 CST 2009 root@trantor.tachypleus.net:/usr/obj/usr/src/sys/TRANTOR Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: Intel(R) Xeon(TM) CPU 2.40GHz (2399.33-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0xf25 Stepping = 5 Features=0xbfebfbff Features2=0x4400 Logical CPUs per core: 2 real memory = 1073152000 (1023 MB) avail memory = 1032585216 (984 MB) ACPI APIC Table: FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs cpu0 (BSP): APIC ID: 0 cpu1 (AP): APIC ID: 1 cpu2 (AP): APIC ID: 6 cpu3 (AP): APIC ID: 7 ioapic0 irqs 0-23 on motherboard kbd1 at kbdmux0 acpi0: on motherboard acpi0: [ITHREAD] acpi0: Power Button (fixed) Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0 pcib0: port 0xcf8-0xcff on acpi0 pci0: on pcib0 agp0: on hostb0 pci0: at device 0.1 (no driver attached) pcib1: mem 0xd0000000-0xd7ffffff at device 1.0 on pci0 pci1: on pcib1 vgapci0: mem 0xc1000000-0xc1ffffff,0xe0000000-0xefffffff irq 17 at device 0.0 on pci1 nvidia0: on vgapci0 vgapci0: child nvidia0 requested pci_enable_busmaster vgapci0: child nvidia0 requested pci_enable_io nvidia0: [GIANT-LOCKED] nvidia0: [ITHREAD] uhci0: port 0x1840-0x185f irq 16 at device 29.0 on pci0 uhci0: [ITHREAD] uhci0: LegSup = 0x2f00 usbus0: on uhci0 uhci1: port 0x1860-0x187f irq 19 at device 29.1 on pci0 uhci1: [ITHREAD] uhci1: LegSup = 0x2f00 usbus1: on uhci1 uhci2: port 0x1880-0x189f irq 18 at device 29.2 on pci0 uhci2: [ITHREAD] uhci2: LegSup = 0x0f10 usbus2: on uhci2 ehci0: mem 0xc0000000-0xc00003ff irq 23 at device 29.7 on pci0 ehci0: [ITHREAD] usbus3: EHCI version 1.0 usbus3: on ehci0 pcib2: at device 30.0 on pci0 pci2: on pcib2 fxp0: port 0x2080-0x20bf mem 0xc2020000-0xc2020fff,0xc2000000-0xc201ffff irq 18 at device 3.0 on pci2 miibus0: on fxp0 inphy0: PHY 1 on miibus0 inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto fxp0: Ethernet address: 00:e0:81:62:52:b1 fxp0: [ITHREAD] fwohci0: port 0x2000-0x207f mem 0xc2021000-0xc20217ff irq 17 at device 6.0 on pci2 fwohci0: [FILTER] fwohci0: OHCI version 1.10 (ROM=1) fwohci0: No. of Isochronous channels is 4. fwohci0: EUI64 00:11:06:66:45:55:5b:f7 fwohci0: Phy 1394a available S400, 3 ports. fwohci0: Link S400, max_rec 2048 bytes. firewire0: on fwohci0 dcons_crom0: on firewire0 dcons_crom0: bus_addr 0x14d0000 fwip0: on firewire0 fwip0: Firewire address: 00:11:06:66:45:55:5b:f7 @ 0xfffe00000000, S400, maxrec 2048 sbp0: on firewire0 fwohci0: Initiate bus reset fwohci0: BUS reset fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode isab0: at device 31.0 on pci0 isa0: on isab0 atapci0: port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x18c0-0x18cf at device 31.1 on pci0 ata0: on atapci0 ata0: [ITHREAD] ata1: on atapci0 ata1: [ITHREAD] ichsmb0: port 0x18a0-0x18bf irq 17 at device 31.3 on pci0 ichsmb0: [ITHREAD] smbus0: on ichsmb0 smb0: on smbus0 pcm0: port 0x1400-0x14ff,0x1800-0x183f mem 0xc0000c00-0xc0000dff,0xc0000800-0xc00008ff irq 17 at device 31.5 on pci0 pcm0: [ITHREAD] pcm0: acpi_button0: on acpi0 atrtc0: port 0x70-0x71 irq 8 on acpi0 atkbdc0: port 0x60,0x64 irq 1 on acpi0 atkbd0: irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] atkbd0: [ITHREAD] uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 uart0: [FILTER] uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0 uart1: [FILTER] fdc1: port 0-0x5,0x7 irq 6 drq 2 on acpi0 fdc1: does not respond device_attach: fdc1 attach returned 6 ppc0: port 0x378-0x37f,0x778-0x77f irq 7 drq 3 on acpi0 ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/9 bytes threshold ppc0: [GIANT-LOCKED] ppc0: [ITHREAD] ppbus0: on ppc0 lpt0: on ppbus0 lpt0: Interrupt-driven port ppi0: on ppbus0 cpu0: on acpi0 p4tcc0: on cpu0 cpu1: on acpi0 p4tcc1: on cpu1 cpu2: on acpi0 p4tcc2: on cpu2 cpu3: on acpi0 p4tcc3: on cpu3 fdc1: port 0-0x5,0x7 irq 6 drq 2 on acpi0 fdc1: does not respond device_attach: fdc1 attach returned 6 pmtimer0 on isa0 orm0: at iomem 0xc0000-0xcf7ff,0xe0000-0xe3fff pnpid ORM0000 on isa0 sc0: at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> vga0: at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 Timecounters tick every 1.000 msec firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me) firewire0: bus manager 0 (me) usbus0: 12Mbps Full Speed USB v1.0 usbus1: 12Mbps Full Speed USB v1.0 usbus2: 12Mbps Full Speed USB v1.0 usbus3: 480Mbps High Speed USB v2.0 ad0: 152627MB at ata0-master UDMA100 ugen0.1: at usbus0 ushub0: on usbus0 ugen1.1: at usbus1 ushub1: on usbus1 acd0: CDRW at ata1-master UDMA33 ugen2.1: at usbus2 ushub2: on usbus2 ugen3.1: at usbus3 ushub3: on usbus3 ushub0: 2 ports with 2 removable, self powered ushub1: 2 ports with 2 removable, self powered ushub2: 2 ports with 2 removable, self powered ushub3: 6 ports with 6 removable, self powered usb2_alloc_device:1423: set address 2 failed (ignored) usb2_alloc_device:1458: getting device descriptor at addr 2 failed! SMP: AP CPU #2 Launched! SMP: AP CPU #1 Launched! SMP: AP CPU #3 Launched! Trying to mount root from ufs:/dev/ad0p3 usb2_req_re_enumerate:1362: addr=2, set address failed! (ignored) usb2_req_re_enumerate:1375: getting device descriptor at addr 2 failed! usb2_req_re_enumerate:1362: addr=2, set address failed! (ignored) usb2_req_re_enumerate:1375: getting device descriptor at addr 2 failed! ugen1.2: <> at usbus1 (disconnected) uhub_reattach_port:417: could not allocate new device! This module (opensolaris) contains code covered by the Common Development and Distribution License (CDDL) see http://opensolaris.org/os/licensing/opensolaris_license/ WARNING: ZFS is considered to be an experimental feature in FreeBSD. ZFS filesystem version 13 ZFS storage pool version 13 usb2_alloc_device:1423: set address 2 failed (ignored) usb2_alloc_device:1458: getting device descriptor at addr 2 failed! usb2_req_re_enumerate:1362: addr=2, set address failed! (ignored) usb2_req_re_enumerate:1375: getting device descriptor at addr 2 failed! usb2_req_re_enumerate:1362: addr=2, set address failed! (ignored) usb2_req_re_enumerate:1375: getting device descriptor at addr 2 failed! ugen1.2: <> at usbus1 (disconnected) uhub_reattach_port:417: could not allocate new device! ugen2.2: at usbus2 ums0: on usbus2 ums0: 3 buttons and [XYZ] coordinates Symlink: ums0 -> usb2.2.0.16 ums0: at ushub2, port 1, addr 2 (disconnected) ugen2.2: at usbus2 (disconnected) usb2_alloc_device:1423: set address 2 failed (ignored) usb2_alloc_device:1458: getting device descriptor at addr 2 failed! ugen2.2: at usbus2 ushub4: on usbus2 ushub4: 3 ports with 2 removable, bus powered ugen2.3: at usbus2 ukbd0: on usbus2 kbd2 at ukbd0 uhid0: on usbus2 Symlink: uhid0 -> usb2.3.1.16 ugen2.4: at usbus2 ums0: on usbus2 ums0: 3 buttons and [XYZ] coordinates Symlink: ums0 -> usb2.4.0.16