Index: Makefile =================================================================== RCS file: /home/pcvs/ports/multimedia/v4l_compat/Makefile,v retrieving revision 1.8 diff -u -p -r1.8 Makefile --- Makefile 7 Jan 2011 13:46:58 -0000 1.8 +++ Makefile 2 Jun 2011 18:04:14 -0000 @@ -7,7 +7,7 @@ PORTNAME= v4l_compat PORTVERSION= 1.0.${DUMMYDATE} -PORTREVISION= 1 +PORTREVISION= 2 CATEGORIES= multimedia MASTER_SITES= LOCAL/kwm DUMMYDATE= 20101027 @@ -17,6 +17,7 @@ COMMENT= Video4Linux IOCTL header files NO_BUILD= yes BASE_HEADERS= videodev.h videodev2.h +BASE_HEADERS2= input.h uinput.h DVB_HEADERS= audio.h ca.h dmx.h frontend.h net.h osd.h version.h video.h do-install: @@ -24,6 +25,9 @@ do-install: .for file in ${BASE_HEADERS} ${INSTALL_DATA} ${WRKSRC}/${file} ${PREFIX}/include/linux/ .endfor +.for file in ${BASE_HEADERS2} + ${INSTALL_DATA} ${FILESDIR}/${file} ${PREFIX}/include/linux/ +.endfor .for file in ${DVB_HEADERS} ${INSTALL_DATA} ${WRKSRC}/dvb/${file} ${PREFIX}/include/linux/dvb/ .endfor Index: pkg-plist =================================================================== RCS file: /home/pcvs/ports/multimedia/v4l_compat/pkg-plist,v retrieving revision 1.3 diff -u -p -r1.3 pkg-plist --- pkg-plist 25 Mar 2010 13:50:31 -0000 1.3 +++ pkg-plist 2 Jun 2011 18:04:33 -0000 @@ -1,3 +1,5 @@ +include/linux/input.h +include/linux/uinput.h include/linux/videodev.h include/linux/videodev2.h include/linux/dvb/audio.h Index: files/input.h @@ -0,0 +1,1662 @@ +#ifndef _INPUT_H +#define _INPUT_H + +/* + * Copyright (c) 1999-2002 Vojtech Pavlik + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published by + * the Free Software Foundation. + */ + +#ifdef __KERNEL__ +#include +#include +#else +#include +#include +#include + +#ifndef HAVE_LINUX_INTEGER_TYPES +/* XXX remove when depending software has been updated */ +#ifndef __u64 +typedef uint64_t __u64; +#endif +#ifndef __u32 +typedef uint32_t __u32; +#endif +#ifndef __u16 +typedef uint16_t __u16; +#endif +#ifndef __u8 +typedef uint8_t __u8; +#endif + +#ifndef __s64 +typedef int64_t __s64; +#endif +#ifndef __s32 +typedef int32_t __s32; +#endif +#ifndef __s16 +typedef int16_t __s16; +#endif +#ifndef __s8 +typedef int8_t __s8; +#endif +#endif + +#ifdef __FreeBSD__ +#define __user +#define _IOC_READ IOC_OUT +#define _IOC_WRITE IOC_IN +#else +#include +#endif +#endif + +/* + * The event structure itself + */ + +struct input_event { + struct timeval time; + __u16 type; + __u16 code; + __s32 value; +}; + +/* + * Protocol version. + */ + +#define EV_VERSION 0x010001 + +/* + * IOCTLs (0x00 - 0x7f) + */ + +struct input_id { + __u16 bustype; + __u16 vendor; + __u16 product; + __u16 version; +}; + +/** + * struct input_absinfo - used by EVIOCGABS/EVIOCSABS ioctls + * @value: latest reported value for the axis. + * @minimum: specifies minimum value for the axis. + * @maximum: specifies maximum value for the axis. + * @fuzz: specifies fuzz value that is used to filter noise from + * the event stream. + * @flat: values that are within this value will be discarded by + * joydev interface and reported as 0 instead. + * @resolution: specifies resolution for the values reported for + * the axis. + * + * Note that input core does not clamp reported values to the + * [minimum, maximum] limits, such task is left to userspace. + * + * Resolution for main axes (ABS_X, ABS_Y, ABS_Z) is reported in + * units per millimeter (units/mm), resolution for rotational axes + * (ABS_RX, ABS_RY, ABS_RZ) is reported in units per radian. + */ +struct input_absinfo { + __s32 value; + __s32 minimum; + __s32 maximum; + __s32 fuzz; + __s32 flat; + __s32 resolution; +}; + +/** + * struct input_keymap_entry - used by EVIOCGKEYCODE/EVIOCSKEYCODE ioctls + * @scancode: scancode represented in machine-endian form. + * @len: length of the scancode that resides in @scancode buffer. + * @index: index in the keymap, may be used instead of scancode + * @flags: allows to specify how kernel should handle the request. For + * example, setting INPUT_KEYMAP_BY_INDEX flag indicates that kernel + * should perform lookup in keymap by @index instead of @scancode + * @keycode: key code assigned to this scancode + * + * The structure is used to retrieve and modify keymap data. Users have + * option of performing lookup either by @scancode itself or by @index + * in keymap entry. EVIOCGKEYCODE will also return scancode or index + * (depending on which element was used to perform lookup). + */ +struct input_keymap_entry { +#define INPUT_KEYMAP_BY_INDEX (1 << 0) + __u8 flags; + __u8 len; + __u16 index; + __u32 keycode; + __u8 scancode[32]; +}; + +#define EVIOCGVERSION _IOR('E', 0x01, int) /* get driver version */ +#define EVIOCGID _IOR('E', 0x02, struct input_id) /* get device ID */ +#define EVIOCGREP _IOR('E', 0x03, unsigned int[2]) /* get repeat settings */ +#define EVIOCSREP _IOW('E', 0x03, unsigned int[2]) /* set repeat settings */ + +/* + * These two need to be _IOWR not _IOR (they're wrong on Linux too but + * there the driver doesn't care.) + */ +#define EVIOCGKEYCODE _IOWR('E', 0x04, unsigned int[2]) /* get keycode */ +#define EVIOCGKEYCODE_V2 _IOWR('E', 0x04, struct input_keymap_entry) +#define EVIOCSKEYCODE _IOW('E', 0x04, unsigned int[2]) /* set keycode */ +#define EVIOCSKEYCODE_V2 _IOW('E', 0x04, struct input_keymap_entry) + +#define EVIOCGNAME(len) _IOC(_IOC_READ, 'E', 0x06, len) /* get device name */ +#define EVIOCGPHYS(len) _IOC(_IOC_READ, 'E', 0x07, len) /* get physical location */ +#define EVIOCGUNIQ(len) _IOC(_IOC_READ, 'E', 0x08, len) /* get unique identifier */ +#define EVIOCGPROP(len) _IOC(_IOC_READ, 'E', 0x09, len) /* get device properties */ + +#define EVIOCGKEY(len) _IOC(_IOC_READ, 'E', 0x18, len) /* get global key state */ +#define EVIOCGLED(len) _IOC(_IOC_READ, 'E', 0x19, len) /* get all LEDs */ +#define EVIOCGSND(len) _IOC(_IOC_READ, 'E', 0x1a, len) /* get all sounds status */ +#define EVIOCGSW(len) _IOC(_IOC_READ, 'E', 0x1b, len) /* get all switch states */ + +#define EVIOCGBIT(ev,len) _IOC(_IOC_READ, 'E', 0x20 + ev, len) /* get event bits */ +#define EVIOCGABS(abs) _IOR('E', 0x40 + abs, struct input_absinfo) /* get abs value/limits */ +#define EVIOCSABS(abs) _IOW('E', 0xc0 + abs, struct input_absinfo) /* set abs value/limits */ + +#define EVIOCSFF _IOC(_IOC_WRITE, 'E', 0x80, sizeof(struct ff_effect)) /* send a force effect to a force feedback device */ +#define EVIOCRMFF _IOW('E', 0x81, int) /* Erase a force effect */ +#define EVIOCGEFFECTS _IOR('E', 0x84, int) /* Report number of effects playable at the same time */ + +#define EVIOCGRAB _IOW('E', 0x90, int) /* Grab/Release device */ + +/* + * Device properties and quirks + */ + +#define INPUT_PROP_POINTER 0x00 /* needs a pointer */ +#define INPUT_PROP_DIRECT 0x01 /* direct input devices */ +#define INPUT_PROP_BUTTONPAD 0x02 /* has button(s) under pad */ +#define INPUT_PROP_SEMI_MT 0x03 /* touch rectangle only */ + +#define INPUT_PROP_MAX 0x1f +#define INPUT_PROP_CNT (INPUT_PROP_MAX + 1) + +/* + * Event types + */ + +#define EV_SYN 0x00 +#define EV_KEY 0x01 +#define EV_REL 0x02 +#define EV_ABS 0x03 +#define EV_MSC 0x04 +#define EV_SW 0x05 +#define EV_LED 0x11 +#define EV_SND 0x12 +#define EV_REP 0x14 +#define EV_FF 0x15 +#define EV_PWR 0x16 +#define EV_FF_STATUS 0x17 +#define EV_MAX 0x1f +#define EV_CNT (EV_MAX+1) + +/* + * Synchronization events. + */ + +#define SYN_REPORT 0 +#define SYN_CONFIG 1 +#define SYN_MT_REPORT 2 +#define SYN_DROPPED 3 + +/* + * Keys and buttons + * + * Most of the keys/buttons are modeled after USB HUT 1.12 + * (see http://www.usb.org/developers/hidpage). + * Abbreviations in the comments: + * AC - Application Control + * AL - Application Launch Button + * SC - System Control + */ + +#define KEY_RESERVED 0 +#define KEY_ESC 1 +#define KEY_1 2 +#define KEY_2 3 +#define KEY_3 4 +#define KEY_4 5 +#define KEY_5 6 +#define KEY_6 7 +#define KEY_7 8 +#define KEY_8 9 +#define KEY_9 10 +#define KEY_0 11 +#define KEY_MINUS 12 +#define KEY_EQUAL 13 +#define KEY_BACKSPACE 14 +#define KEY_TAB 15 +#define KEY_Q 16 +#define KEY_W 17 +#define KEY_E 18 +#define KEY_R 19 +#define KEY_T 20 +#define KEY_Y 21 +#define KEY_U 22 +#define KEY_I 23 +#define KEY_O 24 +#define KEY_P 25 +#define KEY_LEFTBRACE 26 +#define KEY_RIGHTBRACE 27 +#define KEY_ENTER 28 +#define KEY_LEFTCTRL 29 +#define KEY_A 30 +#define KEY_S 31 +#define KEY_D 32 +#define KEY_F 33 +#define KEY_G 34 +#define KEY_H 35 +#define KEY_J 36 +#define KEY_K 37 +#define KEY_L 38 +#define KEY_SEMICOLON 39 +#define KEY_APOSTROPHE 40 +#define KEY_GRAVE 41 +#define KEY_LEFTSHIFT 42 +#define KEY_BACKSLASH 43 +#define KEY_Z 44 +#define KEY_X 45 +#define KEY_C 46 +#define KEY_V 47 +#define KEY_B 48 +#define KEY_N 49 +#define KEY_M 50 +#define KEY_COMMA 51 +#define KEY_DOT 52 +#define KEY_SLASH 53 +#define KEY_RIGHTSHIFT 54 +#define KEY_KPASTERISK 55 +#define KEY_LEFTALT 56 +#define KEY_SPACE 57 +#define KEY_CAPSLOCK 58 +#define KEY_F1 59 +#define KEY_F2 60 +#define KEY_F3 61 +#define KEY_F4 62 +#define KEY_F5 63 +#define KEY_F6 64 +#define KEY_F7 65 +#define KEY_F8 66 +#define KEY_F9 67 +#define KEY_F10 68 +#define KEY_NUMLOCK 69 +#define KEY_SCROLLLOCK 70 +#define KEY_KP7 71 +#define KEY_KP8 72 +#define KEY_KP9 73 +#define KEY_KPMINUS 74 +#define KEY_KP4 75 +#define KEY_KP5 76 +#define KEY_KP6 77 +#define KEY_KPPLUS 78 +#define KEY_KP1 79 +#define KEY_KP2 80 +#define KEY_KP3 81 +#define KEY_KP0 82 +#define KEY_KPDOT 83 + +#define KEY_ZENKAKUHANKAKU 85 +#define KEY_102ND 86 +#define KEY_F11 87 +#define KEY_F12 88 +#define KEY_RO 89 +#define KEY_KATAKANA 90 +#define KEY_HIRAGANA 91 +#define KEY_HENKAN 92 +#define KEY_KATAKANAHIRAGANA 93 +#define KEY_MUHENKAN 94 +#define KEY_KPJPCOMMA 95 +#define KEY_KPENTER 96 +#define KEY_RIGHTCTRL 97 +#define KEY_KPSLASH 98 +#define KEY_SYSRQ 99 +#define KEY_RIGHTALT 100 +#define KEY_LINEFEED 101 +#define KEY_HOME 102 +#define KEY_UP 103 +#define KEY_PAGEUP 104 +#define KEY_LEFT 105 +#define KEY_RIGHT 106 +#define KEY_END 107 +#define KEY_DOWN 108 +#define KEY_PAGEDOWN 109 +#define KEY_INSERT 110 +#define KEY_DELETE 111 +#define KEY_MACRO 112 +#define KEY_MUTE 113 +#define KEY_VOLUMEDOWN 114 +#define KEY_VOLUMEUP 115 +#define KEY_POWER 116 /* SC System Power Down */ +#define KEY_KPEQUAL 117 +#define KEY_KPPLUSMINUS 118 +#define KEY_PAUSE 119 +#define KEY_SCALE 120 /* AL Compiz Scale (Expose) */ + +#define KEY_KPCOMMA 121 +#define KEY_HANGEUL 122 +#define KEY_HANGUEL KEY_HANGEUL +#define KEY_HANJA 123 +#define KEY_YEN 124 +#define KEY_LEFTMETA 125 +#define KEY_RIGHTMETA 126 +#define KEY_COMPOSE 127 + +#define KEY_STOP 128 /* AC Stop */ +#define KEY_AGAIN 129 +#define KEY_PROPS 130 /* AC Properties */ +#define KEY_UNDO 131 /* AC Undo */ +#define KEY_FRONT 132 +#define KEY_COPY 133 /* AC Copy */ +#define KEY_OPEN 134 /* AC Open */ +#define KEY_PASTE 135 /* AC Paste */ +#define KEY_FIND 136 /* AC Search */ +#define KEY_CUT 137 /* AC Cut */ +#define KEY_HELP 138 /* AL Integrated Help Center */ +#define KEY_MENU 139 /* Menu (show menu) */ +#define KEY_CALC 140 /* AL Calculator */ +#define KEY_SETUP 141 +#define KEY_SLEEP 142 /* SC System Sleep */ +#define KEY_WAKEUP 143 /* System Wake Up */ +#define KEY_FILE 144 /* AL Local Machine Browser */ +#define KEY_SENDFILE 145 +#define KEY_DELETEFILE 146 +#define KEY_XFER 147 +#define KEY_PROG1 148 +#define KEY_PROG2 149 +#define KEY_WWW 150 /* AL Internet Browser */ +#define KEY_MSDOS 151 +#define KEY_COFFEE 152 /* AL Terminal Lock/Screensaver */ +#define KEY_SCREENLOCK KEY_COFFEE +#define KEY_DIRECTION 153 +#define KEY_CYCLEWINDOWS 154 +#define KEY_MAIL 155 +#define KEY_BOOKMARKS 156 /* AC Bookmarks */ +#define KEY_COMPUTER 157 +#define KEY_BACK 158 /* AC Back */ +#define KEY_FORWARD 159 /* AC Forward */ +#define KEY_CLOSECD 160 +#define KEY_EJECTCD 161 +#define KEY_EJECTCLOSECD 162 +#define KEY_NEXTSONG 163 +#define KEY_PLAYPAUSE 164 +#define KEY_PREVIOUSSONG 165 +#define KEY_STOPCD 166 +#define KEY_RECORD 167 +#define KEY_REWIND 168 +#define KEY_PHONE 169 /* Media Select Telephone */ +#define KEY_ISO 170 +#define KEY_CONFIG 171 /* AL Consumer Control Configuration */ +#define KEY_HOMEPAGE 172 /* AC Home */ +#define KEY_REFRESH 173 /* AC Refresh */ +#define KEY_EXIT 174 /* AC Exit */ +#define KEY_MOVE 175 +#define KEY_EDIT 176 +#define KEY_SCROLLUP 177 +#define KEY_SCROLLDOWN 178 +#define KEY_KPLEFTPAREN 179 +#define KEY_KPRIGHTPAREN 180 +#define KEY_NEW 181 /* AC New */ +#define KEY_REDO 182 /* AC Redo/Repeat */ + +#define KEY_F13 183 +#define KEY_F14 184 +#define KEY_F15 185 +#define KEY_F16 186 +#define KEY_F17 187 +#define KEY_F18 188 +#define KEY_F19 189 +#define KEY_F20 190 +#define KEY_F21 191 +#define KEY_F22 192 +#define KEY_F23 193 +#define KEY_F24 194 + +#define KEY_PLAYCD 200 +#define KEY_PAUSECD 201 +#define KEY_PROG3 202 +#define KEY_PROG4 203 +#define KEY_DASHBOARD 204 /* AL Dashboard */ +#define KEY_SUSPEND 205 +#define KEY_CLOSE 206 /* AC Close */ +#define KEY_PLAY 207 +#define KEY_FASTFORWARD 208 +#define KEY_BASSBOOST 209 +#define KEY_PRINT 210 /* AC Print */ +#define KEY_HP 211 +#define KEY_CAMERA 212 +#define KEY_SOUND 213 +#define KEY_QUESTION 214 +#define KEY_EMAIL 215 +#define KEY_CHAT 216 +#define KEY_SEARCH 217 +#define KEY_CONNECT 218 +#define KEY_FINANCE 219 /* AL Checkbook/Finance */ +#define KEY_SPORT 220 +#define KEY_SHOP 221 +#define KEY_ALTERASE 222 +#define KEY_CANCEL 223 /* AC Cancel */ +#define KEY_BRIGHTNESSDOWN 224 +#define KEY_BRIGHTNESSUP 225 +#define KEY_MEDIA 226 + +#define KEY_SWITCHVIDEOMODE 227 /* Cycle between available video + outputs (Monitor/LCD/TV-out/etc) */ +#define KEY_KBDILLUMTOGGLE 228 +#define KEY_KBDILLUMDOWN 229 +#define KEY_KBDILLUMUP 230 + +#define KEY_SEND 231 /* AC Send */ +#define KEY_REPLY 232 /* AC Reply */ +#define KEY_FORWARDMAIL 233 /* AC Forward Msg */ +#define KEY_SAVE 234 /* AC Save */ +#define KEY_DOCUMENTS 235 + +#define KEY_BATTERY 236 + +#define KEY_BLUETOOTH 237 +#define KEY_WLAN 238 +#define KEY_UWB 239 + +#define KEY_UNKNOWN 240 + +#define KEY_VIDEO_NEXT 241 /* drive next video source */ +#define KEY_VIDEO_PREV 242 /* drive previous video source */ +#define KEY_BRIGHTNESS_CYCLE 243 /* brightness up, after max is min */ +#define KEY_BRIGHTNESS_ZERO 244 /* brightness off, use ambient */ +#define KEY_DISPLAY_OFF 245 /* display device to off state */ + +#define KEY_WIMAX 246 +#define KEY_RFKILL 247 /* Key that controls all radios */ + +/* Code 255 is reserved for special needs of AT keyboard driver */ + +#define BTN_MISC 0x100 +#define BTN_0 0x100 +#define BTN_1 0x101 +#define BTN_2 0x102 +#define BTN_3 0x103 +#define BTN_4 0x104 +#define BTN_5 0x105 +#define BTN_6 0x106 +#define BTN_7 0x107 +#define BTN_8 0x108 +#define BTN_9 0x109 + +#define BTN_MOUSE 0x110 +#define BTN_LEFT 0x110 +#define BTN_RIGHT 0x111 +#define BTN_MIDDLE 0x112 +#define BTN_SIDE 0x113 +#define BTN_EXTRA 0x114 +#define BTN_FORWARD 0x115 +#define BTN_BACK 0x116 +#define BTN_TASK 0x117 + +#define BTN_JOYSTICK 0x120 +#define BTN_TRIGGER 0x120 +#define BTN_THUMB 0x121 +#define BTN_THUMB2 0x122 +#define BTN_TOP 0x123 +#define BTN_TOP2 0x124 +#define BTN_PINKIE 0x125 +#define BTN_BASE 0x126 +#define BTN_BASE2 0x127 +#define BTN_BASE3 0x128 +#define BTN_BASE4 0x129 +#define BTN_BASE5 0x12a +#define BTN_BASE6 0x12b +#define BTN_DEAD 0x12f + +#define BTN_GAMEPAD 0x130 +#define BTN_A 0x130 +#define BTN_B 0x131 +#define BTN_C 0x132 +#define BTN_X 0x133 +#define BTN_Y 0x134 +#define BTN_Z 0x135 +#define BTN_TL 0x136 +#define BTN_TR 0x137 +#define BTN_TL2 0x138 +#define BTN_TR2 0x139 +#define BTN_SELECT 0x13a +#define BTN_START 0x13b +#define BTN_MODE 0x13c +#define BTN_THUMBL 0x13d +#define BTN_THUMBR 0x13e + +#define BTN_DIGI 0x140 +#define BTN_TOOL_PEN 0x140 +#define BTN_TOOL_RUBBER 0x141 +#define BTN_TOOL_BRUSH 0x142 +#define BTN_TOOL_PENCIL 0x143 +#define BTN_TOOL_AIRBRUSH 0x144 +#define BTN_TOOL_FINGER 0x145 +#define BTN_TOOL_MOUSE 0x146 +#define BTN_TOOL_LENS 0x147 +#define BTN_TOUCH 0x14a +#define BTN_STYLUS 0x14b +#define BTN_STYLUS2 0x14c +#define BTN_TOOL_DOUBLETAP 0x14d +#define BTN_TOOL_TRIPLETAP 0x14e +#define BTN_TOOL_QUADTAP 0x14f /* Four fingers on trackpad */ + +#define BTN_WHEEL 0x150 +#define BTN_GEAR_DOWN 0x150 +#define BTN_GEAR_UP 0x151 + +#define KEY_OK 0x160 +#define KEY_SELECT 0x161 +#define KEY_GOTO 0x162 +#define KEY_CLEAR 0x163 +#define KEY_POWER2 0x164 +#define KEY_OPTION 0x165 +#define KEY_INFO 0x166 /* AL OEM Features/Tips/Tutorial */ +#define KEY_TIME 0x167 +#define KEY_VENDOR 0x168 +#define KEY_ARCHIVE 0x169 +#define KEY_PROGRAM 0x16a /* Media Select Program Guide */ +#define KEY_CHANNEL 0x16b +#define KEY_FAVORITES 0x16c +#define KEY_EPG 0x16d +#define KEY_PVR 0x16e /* Media Select Home */ +#define KEY_MHP 0x16f +#define KEY_LANGUAGE 0x170 +#define KEY_TITLE 0x171 +#define KEY_SUBTITLE 0x172 +#define KEY_ANGLE 0x173 +#define KEY_ZOOM 0x174 +#define KEY_MODE 0x175 +#define KEY_KEYBOARD 0x176 +#define KEY_SCREEN 0x177 +#define KEY_PC 0x178 /* Media Select Computer */ +#define KEY_TV 0x179 /* Media Select TV */ +#define KEY_TV2 0x17a /* Media Select Cable */ +#define KEY_VCR 0x17b /* Media Select VCR */ +#define KEY_VCR2 0x17c /* VCR Plus */ +#define KEY_SAT 0x17d /* Media Select Satellite */ +#define KEY_SAT2 0x17e +#define KEY_CD 0x17f /* Media Select CD */ +#define KEY_TAPE 0x180 /* Media Select Tape */ +#define KEY_RADIO 0x181 +#define KEY_TUNER 0x182 /* Media Select Tuner */ +#define KEY_PLAYER 0x183 +#define KEY_TEXT 0x184 +#define KEY_DVD 0x185 /* Media Select DVD */ +#define KEY_AUX 0x186 +#define KEY_MP3 0x187 +#define KEY_AUDIO 0x188 /* AL Audio Browser */ +#define KEY_VIDEO 0x189 /* AL Movie Browser */ +#define KEY_DIRECTORY 0x18a +#define KEY_LIST 0x18b +#define KEY_MEMO 0x18c /* Media Select Messages */ +#define KEY_CALENDAR 0x18d +#define KEY_RED 0x18e +#define KEY_GREEN 0x18f +#define KEY_YELLOW 0x190 +#define KEY_BLUE 0x191 +#define KEY_CHANNELUP 0x192 /* Channel Increment */ +#define KEY_CHANNELDOWN 0x193 /* Channel Decrement */ +#define KEY_FIRST 0x194 +#define KEY_LAST 0x195 /* Recall Last */ +#define KEY_AB 0x196 +#define KEY_NEXT 0x197 +#define KEY_RESTART 0x198 +#define KEY_SLOW 0x199 +#define KEY_SHUFFLE 0x19a +#define KEY_BREAK 0x19b +#define KEY_PREVIOUS 0x19c +#define KEY_DIGITS 0x19d +#define KEY_TEEN 0x19e +#define KEY_TWEN 0x19f +#define KEY_VIDEOPHONE 0x1a0 /* Media Select Video Phone */ +#define KEY_GAMES 0x1a1 /* Media Select Games */ +#define KEY_ZOOMIN 0x1a2 /* AC Zoom In */ +#define KEY_ZOOMOUT 0x1a3 /* AC Zoom Out */ +#define KEY_ZOOMRESET 0x1a4 /* AC Zoom */ +#define KEY_WORDPROCESSOR 0x1a5 /* AL Word Processor */ +#define KEY_EDITOR 0x1a6 /* AL Text Editor */ +#define KEY_SPREADSHEET 0x1a7 /* AL Spreadsheet */ +#define KEY_GRAPHICSEDITOR 0x1a8 /* AL Graphics Editor */ +#define KEY_PRESENTATION 0x1a9 /* AL Presentation App */ +#define KEY_DATABASE 0x1aa /* AL Database App */ +#define KEY_NEWS 0x1ab /* AL Newsreader */ +#define KEY_VOICEMAIL 0x1ac /* AL Voicemail */ +#define KEY_ADDRESSBOOK 0x1ad /* AL Contacts/Address Book */ +#define KEY_MESSENGER 0x1ae /* AL Instant Messaging */ +#define KEY_DISPLAYTOGGLE 0x1af /* Turn display (LCD) on and off */ +#define KEY_SPELLCHECK 0x1b0 /* AL Spell Check */ +#define KEY_LOGOFF 0x1b1 /* AL Logoff */ + +#define KEY_DOLLAR 0x1b2 +#define KEY_EURO 0x1b3 + +#define KEY_FRAMEBACK 0x1b4 /* Consumer - transport controls */ +#define KEY_FRAMEFORWARD 0x1b5 +#define KEY_CONTEXT_MENU 0x1b6 /* GenDesc - system context menu */ +#define KEY_MEDIA_REPEAT 0x1b7 /* Consumer - transport control */ +#define KEY_10CHANNELSUP 0x1b8 /* 10 channels up (10+) */ +#define KEY_10CHANNELSDOWN 0x1b9 /* 10 channels down (10-) */ +#define KEY_IMAGES 0x1ba /* AL Image Browser */ + +#define KEY_DEL_EOL 0x1c0 +#define KEY_DEL_EOS 0x1c1 +#define KEY_INS_LINE 0x1c2 +#define KEY_DEL_LINE 0x1c3 + +#define KEY_FN 0x1d0 +#define KEY_FN_ESC 0x1d1 +#define KEY_FN_F1 0x1d2 +#define KEY_FN_F2 0x1d3 +#define KEY_FN_F3 0x1d4 +#define KEY_FN_F4 0x1d5 +#define KEY_FN_F5 0x1d6 +#define KEY_FN_F6 0x1d7 +#define KEY_FN_F7 0x1d8 +#define KEY_FN_F8 0x1d9 +#define KEY_FN_F9 0x1da +#define KEY_FN_F10 0x1db +#define KEY_FN_F11 0x1dc +#define KEY_FN_F12 0x1dd +#define KEY_FN_1 0x1de +#define KEY_FN_2 0x1df +#define KEY_FN_D 0x1e0 +#define KEY_FN_E 0x1e1 +#define KEY_FN_F 0x1e2 +#define KEY_FN_S 0x1e3 +#define KEY_FN_B 0x1e4 + +#define KEY_BRL_DOT1 0x1f1 +#define KEY_BRL_DOT2 0x1f2 +#define KEY_BRL_DOT3 0x1f3 +#define KEY_BRL_DOT4 0x1f4 +#define KEY_BRL_DOT5 0x1f5 +#define KEY_BRL_DOT6 0x1f6 +#define KEY_BRL_DOT7 0x1f7 +#define KEY_BRL_DOT8 0x1f8 +#define KEY_BRL_DOT9 0x1f9 +#define KEY_BRL_DOT10 0x1fa + +#define KEY_NUMERIC_0 0x200 /* used by phones, remote controls, */ +#define KEY_NUMERIC_1 0x201 /* and other keypads */ +#define KEY_NUMERIC_2 0x202 +#define KEY_NUMERIC_3 0x203 +#define KEY_NUMERIC_4 0x204 +#define KEY_NUMERIC_5 0x205 +#define KEY_NUMERIC_6 0x206 +#define KEY_NUMERIC_7 0x207 +#define KEY_NUMERIC_8 0x208 +#define KEY_NUMERIC_9 0x209 +#define KEY_NUMERIC_STAR 0x20a +#define KEY_NUMERIC_POUND 0x20b + +#define KEY_CAMERA_FOCUS 0x210 +#define KEY_WPS_BUTTON 0x211 /* WiFi Protected Setup key */ + +#define KEY_TOUCHPAD_TOGGLE 0x212 /* Request switch touchpad on or off */ +#define KEY_TOUCHPAD_ON 0x213 +#define KEY_TOUCHPAD_OFF 0x214 + +#define KEY_CAMERA_ZOOMIN 0x215 +#define KEY_CAMERA_ZOOMOUT 0x216 +#define KEY_CAMERA_UP 0x217 +#define KEY_CAMERA_DOWN 0x218 +#define KEY_CAMERA_LEFT 0x219 +#define KEY_CAMERA_RIGHT 0x21a + +#define BTN_TRIGGER_HAPPY 0x2c0 +#define BTN_TRIGGER_HAPPY1 0x2c0 +#define BTN_TRIGGER_HAPPY2 0x2c1 +#define BTN_TRIGGER_HAPPY3 0x2c2 +#define BTN_TRIGGER_HAPPY4 0x2c3 +#define BTN_TRIGGER_HAPPY5 0x2c4 +#define BTN_TRIGGER_HAPPY6 0x2c5 +#define BTN_TRIGGER_HAPPY7 0x2c6 +#define BTN_TRIGGER_HAPPY8 0x2c7 +#define BTN_TRIGGER_HAPPY9 0x2c8 +#define BTN_TRIGGER_HAPPY10 0x2c9 +#define BTN_TRIGGER_HAPPY11 0x2ca +#define BTN_TRIGGER_HAPPY12 0x2cb +#define BTN_TRIGGER_HAPPY13 0x2cc +#define BTN_TRIGGER_HAPPY14 0x2cd +#define BTN_TRIGGER_HAPPY15 0x2ce +#define BTN_TRIGGER_HAPPY16 0x2cf +#define BTN_TRIGGER_HAPPY17 0x2d0 +#define BTN_TRIGGER_HAPPY18 0x2d1 +#define BTN_TRIGGER_HAPPY19 0x2d2 +#define BTN_TRIGGER_HAPPY20 0x2d3 +#define BTN_TRIGGER_HAPPY21 0x2d4 +#define BTN_TRIGGER_HAPPY22 0x2d5 +#define BTN_TRIGGER_HAPPY23 0x2d6 +#define BTN_TRIGGER_HAPPY24 0x2d7 +#define BTN_TRIGGER_HAPPY25 0x2d8 +#define BTN_TRIGGER_HAPPY26 0x2d9 +#define BTN_TRIGGER_HAPPY27 0x2da +#define BTN_TRIGGER_HAPPY28 0x2db +#define BTN_TRIGGER_HAPPY29 0x2dc +#define BTN_TRIGGER_HAPPY30 0x2dd +#define BTN_TRIGGER_HAPPY31 0x2de +#define BTN_TRIGGER_HAPPY32 0x2df +#define BTN_TRIGGER_HAPPY33 0x2e0 +#define BTN_TRIGGER_HAPPY34 0x2e1 +#define BTN_TRIGGER_HAPPY35 0x2e2 +#define BTN_TRIGGER_HAPPY36 0x2e3 +#define BTN_TRIGGER_HAPPY37 0x2e4 +#define BTN_TRIGGER_HAPPY38 0x2e5 +#define BTN_TRIGGER_HAPPY39 0x2e6 +#define BTN_TRIGGER_HAPPY40 0x2e7 + +/* We avoid low common keys in module aliases so they don't get huge. */ +#define KEY_MIN_INTERESTING KEY_MUTE +#define KEY_MAX 0x2ff +#define KEY_CNT (KEY_MAX+1) + +/* + * Relative axes + */ + +#define REL_X 0x00 +#define REL_Y 0x01 +#define REL_Z 0x02 +#define REL_RX 0x03 +#define REL_RY 0x04 +#define REL_RZ 0x05 +#define REL_HWHEEL 0x06 +#define REL_DIAL 0x07 +#define REL_WHEEL 0x08 +#define REL_MISC 0x09 +#define REL_MAX 0x0f +#define REL_CNT (REL_MAX+1) + +/* + * Absolute axes + */ + +#define ABS_X 0x00 +#define ABS_Y 0x01 +#define ABS_Z 0x02 +#define ABS_RX 0x03 +#define ABS_RY 0x04 +#define ABS_RZ 0x05 +#define ABS_THROTTLE 0x06 +#define ABS_RUDDER 0x07 +#define ABS_WHEEL 0x08 +#define ABS_GAS 0x09 +#define ABS_BRAKE 0x0a +#define ABS_HAT0X 0x10 +#define ABS_HAT0Y 0x11 +#define ABS_HAT1X 0x12 +#define ABS_HAT1Y 0x13 +#define ABS_HAT2X 0x14 +#define ABS_HAT2Y 0x15 +#define ABS_HAT3X 0x16 +#define ABS_HAT3Y 0x17 +#define ABS_PRESSURE 0x18 +#define ABS_DISTANCE 0x19 +#define ABS_TILT_X 0x1a +#define ABS_TILT_Y 0x1b +#define ABS_TOOL_WIDTH 0x1c + +#define ABS_VOLUME 0x20 + +#define ABS_MISC 0x28 + +#define ABS_MT_SLOT 0x2f /* MT slot being modified */ +#define ABS_MT_TOUCH_MAJOR 0x30 /* Major axis of touching ellipse */ +#define ABS_MT_TOUCH_MINOR 0x31 /* Minor axis (omit if circular) */ +#define ABS_MT_WIDTH_MAJOR 0x32 /* Major axis of approaching ellipse */ +#define ABS_MT_WIDTH_MINOR 0x33 /* Minor axis (omit if circular) */ +#define ABS_MT_ORIENTATION 0x34 /* Ellipse orientation */ +#define ABS_MT_POSITION_X 0x35 /* Center X ellipse position */ +#define ABS_MT_POSITION_Y 0x36 /* Center Y ellipse position */ +#define ABS_MT_TOOL_TYPE 0x37 /* Type of touching device */ +#define ABS_MT_BLOB_ID 0x38 /* Group a set of packets as a blob */ +#define ABS_MT_TRACKING_ID 0x39 /* Unique ID of initiated contact */ +#define ABS_MT_PRESSURE 0x3a /* Pressure on contact area */ +#define ABS_MT_DISTANCE 0x3b /* Contact hover distance */ + +#ifdef __KERNEL__ +/* Implementation details, userspace should not care about these */ +#define ABS_MT_FIRST ABS_MT_TOUCH_MAJOR +#define ABS_MT_LAST ABS_MT_DISTANCE +#endif + +#define ABS_MAX 0x3f +#define ABS_CNT (ABS_MAX+1) + +/* + * Switch events + */ + +#define SW_LID 0x00 /* set = lid shut */ +#define SW_TABLET_MODE 0x01 /* set = tablet mode */ +#define SW_HEADPHONE_INSERT 0x02 /* set = inserted */ +#define SW_RFKILL_ALL 0x03 /* rfkill master switch, type "any" + set = radio enabled */ +#define SW_RADIO SW_RFKILL_ALL /* deprecated */ +#define SW_MICROPHONE_INSERT 0x04 /* set = inserted */ +#define SW_DOCK 0x05 /* set = plugged into dock */ +#define SW_LINEOUT_INSERT 0x06 /* set = inserted */ +#define SW_JACK_PHYSICAL_INSERT 0x07 /* set = mechanical switch set */ +#define SW_VIDEOOUT_INSERT 0x08 /* set = inserted */ +#define SW_CAMERA_LENS_COVER 0x09 /* set = lens covered */ +#define SW_KEYPAD_SLIDE 0x0a /* set = keypad slide out */ +#define SW_FRONT_PROXIMITY 0x0b /* set = front proximity sensor active */ +#define SW_ROTATE_LOCK 0x0c /* set = rotate locked/disabled */ +#define SW_MAX 0x0f +#define SW_CNT (SW_MAX+1) + +/* + * Misc events + */ + +#define MSC_SERIAL 0x00 +#define MSC_PULSELED 0x01 +#define MSC_GESTURE 0x02 +#define MSC_RAW 0x03 +#define MSC_SCAN 0x04 +#define MSC_MAX 0x07 +#define MSC_CNT (MSC_MAX+1) + +/* + * LEDs + */ + +#define LED_NUML 0x00 +#define LED_CAPSL 0x01 +#define LED_SCROLLL 0x02 +#define LED_COMPOSE 0x03 +#define LED_KANA 0x04 +#define LED_SLEEP 0x05 +#define LED_SUSPEND 0x06 +#define LED_MUTE 0x07 +#define LED_MISC 0x08 +#define LED_MAIL 0x09 +#define LED_CHARGING 0x0a +#define LED_MAX 0x0f +#define LED_CNT (LED_MAX+1) + +/* + * Autorepeat values + */ + +#define REP_DELAY 0x00 +#define REP_PERIOD 0x01 +#define REP_MAX 0x01 +#define REP_CNT (REP_MAX+1) + +/* + * Sounds + */ + +#define SND_CLICK 0x00 +#define SND_BELL 0x01 +#define SND_TONE 0x02 +#define SND_MAX 0x07 +#define SND_CNT (SND_MAX+1) + +/* + * IDs. + */ + +#define ID_BUS 0 +#define ID_VENDOR 1 +#define ID_PRODUCT 2 +#define ID_VERSION 3 + +#define BUS_PCI 0x01 +#define BUS_ISAPNP 0x02 +#define BUS_USB 0x03 +#define BUS_HIL 0x04 +#define BUS_BLUETOOTH 0x05 +#define BUS_VIRTUAL 0x06 + +#define BUS_ISA 0x10 +#define BUS_I8042 0x11 +#define BUS_XTKBD 0x12 +#define BUS_RS232 0x13 +#define BUS_GAMEPORT 0x14 +#define BUS_PARPORT 0x15 +#define BUS_AMIGA 0x16 +#define BUS_ADB 0x17 +#define BUS_I2C 0x18 +#define BUS_HOST 0x19 +#define BUS_GSC 0x1A +#define BUS_ATARI 0x1B +#define BUS_SPI 0x1C + +/* + * MT_TOOL types + */ +#define MT_TOOL_FINGER 0 +#define MT_TOOL_PEN 1 +#define MT_TOOL_MAX 1 + +/* + * Values describing the status of a force-feedback effect + */ +#define FF_STATUS_STOPPED 0x00 +#define FF_STATUS_PLAYING 0x01 +#define FF_STATUS_MAX 0x01 + +/* + * Structures used in ioctls to upload effects to a device + * They are pieces of a bigger structure (called ff_effect) + */ + +/* + * All duration values are expressed in ms. Values above 32767 ms (0x7fff) + * should not be used and have unspecified results. + */ + +/** + * struct ff_replay - defines scheduling of the force-feedback effect + * @length: duration of the effect + * @delay: delay before effect should start playing + */ +struct ff_replay { + __u16 length; + __u16 delay; +}; + +/** + * struct ff_trigger - defines what triggers the force-feedback effect + * @button: number of the button triggering the effect + * @interval: controls how soon the effect can be re-triggered + */ +struct ff_trigger { + __u16 button; + __u16 interval; +}; + +/** + * struct ff_envelope - generic force-feedback effect envelope + * @attack_length: duration of the attack (ms) + * @attack_level: level at the beginning of the attack + * @fade_length: duration of fade (ms) + * @fade_level: level at the end of fade + * + * The @attack_level and @fade_level are absolute values; when applying + * envelope force-feedback core will convert to positive/negative + * value based on polarity of the default level of the effect. + * Valid range for the attack and fade levels is 0x0000 - 0x7fff + */ +struct ff_envelope { + __u16 attack_length; + __u16 attack_level; + __u16 fade_length; + __u16 fade_level; +}; + +/** + * struct ff_constant_effect - defines parameters of a constant force-feedback effect + * @level: strength of the effect; may be negative + * @envelope: envelope data + */ +struct ff_constant_effect { + __s16 level; + struct ff_envelope envelope; +}; + +/** + * struct ff_ramp_effect - defines parameters of a ramp force-feedback effect + * @start_level: beginning strength of the effect; may be negative + * @end_level: final strength of the effect; may be negative + * @envelope: envelope data + */ +struct ff_ramp_effect { + __s16 start_level; + __s16 end_level; + struct ff_envelope envelope; +}; + +/** + * struct ff_condition_effect - defines a spring or friction force-feedback effect + * @right_saturation: maximum level when joystick moved all way to the right + * @left_saturation: same for the left side + * @right_coeff: controls how fast the force grows when the joystick moves + * to the right + * @left_coeff: same for the left side + * @deadband: size of the dead zone, where no force is produced + * @center: position of the dead zone + */ +struct ff_condition_effect { + __u16 right_saturation; + __u16 left_saturation; + + __s16 right_coeff; + __s16 left_coeff; + + __u16 deadband; + __s16 center; +}; + +/** + * struct ff_periodic_effect - defines parameters of a periodic force-feedback effect + * @waveform: kind of the effect (wave) + * @period: period of the wave (ms) + * @magnitude: peak value + * @offset: mean value of the wave (roughly) + * @phase: 'horizontal' shift + * @envelope: envelope data + * @custom_len: number of samples (FF_CUSTOM only) + * @custom_data: buffer of samples (FF_CUSTOM only) + * + * Known waveforms - FF_SQUARE, FF_TRIANGLE, FF_SINE, FF_SAW_UP, + * FF_SAW_DOWN, FF_CUSTOM. The exact syntax FF_CUSTOM is undefined + * for the time being as no driver supports it yet. + * + * Note: the data pointed by custom_data is copied by the driver. + * You can therefore dispose of the memory after the upload/update. + */ +struct ff_periodic_effect { + __u16 waveform; + __u16 period; + __s16 magnitude; + __s16 offset; + __u16 phase; + + struct ff_envelope envelope; + + __u32 custom_len; + __s16 __user *custom_data; +}; + +/** + * struct ff_rumble_effect - defines parameters of a periodic force-feedback effect + * @strong_magnitude: magnitude of the heavy motor + * @weak_magnitude: magnitude of the light one + * + * Some rumble pads have two motors of different weight. Strong_magnitude + * represents the magnitude of the vibration generated by the heavy one. + */ +struct ff_rumble_effect { + __u16 strong_magnitude; + __u16 weak_magnitude; +}; + +/** + * struct ff_effect - defines force feedback effect + * @type: type of the effect (FF_CONSTANT, FF_PERIODIC, FF_RAMP, FF_SPRING, + * FF_FRICTION, FF_DAMPER, FF_RUMBLE, FF_INERTIA, or FF_CUSTOM) + * @id: an unique id assigned to an effect + * @direction: direction of the effect + * @trigger: trigger conditions (struct ff_trigger) + * @replay: scheduling of the effect (struct ff_replay) + * @u: effect-specific structure (one of ff_constant_effect, ff_ramp_effect, + * ff_periodic_effect, ff_condition_effect, ff_rumble_effect) further + * defining effect parameters + * + * This structure is sent through ioctl from the application to the driver. + * To create a new effect application should set its @id to -1; the kernel + * will return assigned @id which can later be used to update or delete + * this effect. + * + * Direction of the effect is encoded as follows: + * 0 deg -> 0x0000 (down) + * 90 deg -> 0x4000 (left) + * 180 deg -> 0x8000 (up) + * 270 deg -> 0xC000 (right) + */ +struct ff_effect { + __u16 type; + __s16 id; + __u16 direction; + struct ff_trigger trigger; + struct ff_replay replay; + + union { + struct ff_constant_effect constant; + struct ff_ramp_effect ramp; + struct ff_periodic_effect periodic; + struct ff_condition_effect condition[2]; /* One for each axis */ + struct ff_rumble_effect rumble; + } u; +}; + +/* + * Force feedback effect types + */ + +#define FF_RUMBLE 0x50 +#define FF_PERIODIC 0x51 +#define FF_CONSTANT 0x52 +#define FF_SPRING 0x53 +#define FF_FRICTION 0x54 +#define FF_DAMPER 0x55 +#define FF_INERTIA 0x56 +#define FF_RAMP 0x57 + +#define FF_EFFECT_MIN FF_RUMBLE +#define FF_EFFECT_MAX FF_RAMP + +/* + * Force feedback periodic effect types + */ + +#define FF_SQUARE 0x58 +#define FF_TRIANGLE 0x59 +#define FF_SINE 0x5a +#define FF_SAW_UP 0x5b +#define FF_SAW_DOWN 0x5c +#define FF_CUSTOM 0x5d + +#define FF_WAVEFORM_MIN FF_SQUARE +#define FF_WAVEFORM_MAX FF_CUSTOM + +/* + * Set ff device properties + */ + +#define FF_GAIN 0x60 +#define FF_AUTOCENTER 0x61 + +#define FF_MAX 0x7f +#define FF_CNT (FF_MAX+1) + +#ifdef __KERNEL__ + +/* + * In-kernel definitions. + */ + +#include +#include +#include +#include + +/** + * struct input_dev - represents an input device + * @name: name of the device + * @phys: physical path to the device in the system hierarchy + * @uniq: unique identification code for the device (if device has it) + * @id: id of the device (struct input_id) + * @propbit: bitmap of device properties and quirks + * @evbit: bitmap of types of events supported by the device (EV_KEY, + * EV_REL, etc.) + * @keybit: bitmap of keys/buttons this device has + * @relbit: bitmap of relative axes for the device + * @absbit: bitmap of absolute axes for the device + * @mscbit: bitmap of miscellaneous events supported by the device + * @ledbit: bitmap of leds present on the device + * @sndbit: bitmap of sound effects supported by the device + * @ffbit: bitmap of force feedback effects supported by the device + * @swbit: bitmap of switches present on the device + * @hint_events_per_packet: average number of events generated by the + * device in a packet (between EV_SYN/SYN_REPORT events). Used by + * event handlers to estimate size of the buffer needed to hold + * events. + * @keycodemax: size of keycode table + * @keycodesize: size of elements in keycode table + * @keycode: map of scancodes to keycodes for this device + * @getkeycode: optional legacy method to retrieve current keymap. + * @setkeycode: optional method to alter current keymap, used to implement + * sparse keymaps. If not supplied default mechanism will be used. + * The method is being called while holding event_lock and thus must + * not sleep + * @ff: force feedback structure associated with the device if device + * supports force feedback effects + * @repeat_key: stores key code of the last key pressed; used to implement + * software autorepeat + * @timer: timer for software autorepeat + * @rep: current values for autorepeat parameters (delay, rate) + * @mt: pointer to array of struct input_mt_slot holding current values + * of tracked contacts + * @mtsize: number of MT slots the device uses + * @slot: MT slot currently being transmitted + * @trkid: stores MT tracking ID for the current contact + * @absinfo: array of &struct input_absinfo elements holding information + * about absolute axes (current value, min, max, flat, fuzz, + * resolution) + * @key: reflects current state of device's keys/buttons + * @led: reflects current state of device's LEDs + * @snd: reflects current state of sound effects + * @sw: reflects current state of device's switches + * @open: this method is called when the very first user calls + * input_open_device(). The driver must prepare the device + * to start generating events (start polling thread, + * request an IRQ, submit URB, etc.) + * @close: this method is called when the very last user calls + * input_close_device(). + * @flush: purges the device. Most commonly used to get rid of force + * feedback effects loaded into the device when disconnecting + * from it + * @event: event handler for events sent _to_ the device, like EV_LED + * or EV_SND. The device is expected to carry out the requested + * action (turn on a LED, play sound, etc.) The call is protected + * by @event_lock and must not sleep + * @grab: input handle that currently has the device grabbed (via + * EVIOCGRAB ioctl). When a handle grabs a device it becomes sole + * recipient for all input events coming from the device + * @event_lock: this spinlock is is taken when input core receives + * and processes a new event for the device (in input_event()). + * Code that accesses and/or modifies parameters of a device + * (such as keymap or absmin, absmax, absfuzz, etc.) after device + * has been registered with input core must take this lock. + * @mutex: serializes calls to open(), close() and flush() methods + * @users: stores number of users (input handlers) that opened this + * device. It is used by input_open_device() and input_close_device() + * to make sure that dev->open() is only called when the first + * user opens device and dev->close() is called when the very + * last user closes the device + * @going_away: marks devices that are in a middle of unregistering and + * causes input_open_device*() fail with -ENODEV. + * @sync: set to %true when there were no new events since last EV_SYN + * @dev: driver model's view of this device + * @h_list: list of input handles associated with the device. When + * accessing the list dev->mutex must be held + * @node: used to place the device onto input_dev_list + */ +struct input_dev { + const char *name; + const char *phys; + const char *uniq; + struct input_id id; + + unsigned long propbit[BITS_TO_LONGS(INPUT_PROP_CNT)]; + + unsigned long evbit[BITS_TO_LONGS(EV_CNT)]; + unsigned long keybit[BITS_TO_LONGS(KEY_CNT)]; + unsigned long relbit[BITS_TO_LONGS(REL_CNT)]; + unsigned long absbit[BITS_TO_LONGS(ABS_CNT)]; + unsigned long mscbit[BITS_TO_LONGS(MSC_CNT)]; + unsigned long ledbit[BITS_TO_LONGS(LED_CNT)]; + unsigned long sndbit[BITS_TO_LONGS(SND_CNT)]; + unsigned long ffbit[BITS_TO_LONGS(FF_CNT)]; + unsigned long swbit[BITS_TO_LONGS(SW_CNT)]; + + unsigned int hint_events_per_packet; + + unsigned int keycodemax; + unsigned int keycodesize; + void *keycode; + + int (*setkeycode)(struct input_dev *dev, + const struct input_keymap_entry *ke, + unsigned int *old_keycode); + int (*getkeycode)(struct input_dev *dev, + struct input_keymap_entry *ke); + + struct ff_device *ff; + + unsigned int repeat_key; + struct timer_list timer; + + int rep[REP_CNT]; + + struct input_mt_slot *mt; + int mtsize; + int slot; + int trkid; + + struct input_absinfo *absinfo; + + unsigned long key[BITS_TO_LONGS(KEY_CNT)]; + unsigned long led[BITS_TO_LONGS(LED_CNT)]; + unsigned long snd[BITS_TO_LONGS(SND_CNT)]; + unsigned long sw[BITS_TO_LONGS(SW_CNT)]; + + int (*open)(struct input_dev *dev); + void (*close)(struct input_dev *dev); + int (*flush)(struct input_dev *dev, struct file *file); + int (*event)(struct input_dev *dev, unsigned int type, unsigned int code, int value); + + struct input_handle __rcu *grab; + + spinlock_t event_lock; + struct mutex mutex; + + unsigned int users; + bool going_away; + + bool sync; + + struct device dev; + + struct list_head h_list; + struct list_head node; +}; +#define to_input_dev(d) container_of(d, struct input_dev, dev) + +/* + * Verify that we are in sync with input_device_id mod_devicetable.h #defines + */ + +#if EV_MAX != INPUT_DEVICE_ID_EV_MAX +#error "EV_MAX and INPUT_DEVICE_ID_EV_MAX do not match" +#endif + +#if KEY_MIN_INTERESTING != INPUT_DEVICE_ID_KEY_MIN_INTERESTING +#error "KEY_MIN_INTERESTING and INPUT_DEVICE_ID_KEY_MIN_INTERESTING do not match" +#endif + +#if KEY_MAX != INPUT_DEVICE_ID_KEY_MAX +#error "KEY_MAX and INPUT_DEVICE_ID_KEY_MAX do not match" +#endif + +#if REL_MAX != INPUT_DEVICE_ID_REL_MAX +#error "REL_MAX and INPUT_DEVICE_ID_REL_MAX do not match" +#endif + +#if ABS_MAX != INPUT_DEVICE_ID_ABS_MAX +#error "ABS_MAX and INPUT_DEVICE_ID_ABS_MAX do not match" +#endif + +#if MSC_MAX != INPUT_DEVICE_ID_MSC_MAX +#error "MSC_MAX and INPUT_DEVICE_ID_MSC_MAX do not match" +#endif + +#if LED_MAX != INPUT_DEVICE_ID_LED_MAX +#error "LED_MAX and INPUT_DEVICE_ID_LED_MAX do not match" +#endif + +#if SND_MAX != INPUT_DEVICE_ID_SND_MAX +#error "SND_MAX and INPUT_DEVICE_ID_SND_MAX do not match" +#endif + +#if FF_MAX != INPUT_DEVICE_ID_FF_MAX +#error "FF_MAX and INPUT_DEVICE_ID_FF_MAX do not match" +#endif + +#if SW_MAX != INPUT_DEVICE_ID_SW_MAX +#error "SW_MAX and INPUT_DEVICE_ID_SW_MAX do not match" +#endif + +#define INPUT_DEVICE_ID_MATCH_DEVICE \ + (INPUT_DEVICE_ID_MATCH_BUS | INPUT_DEVICE_ID_MATCH_VENDOR | INPUT_DEVICE_ID_MATCH_PRODUCT) +#define INPUT_DEVICE_ID_MATCH_DEVICE_AND_VERSION \ + (INPUT_DEVICE_ID_MATCH_DEVICE | INPUT_DEVICE_ID_MATCH_VERSION) + +struct input_handle; + +/** + * struct input_handler - implements one of interfaces for input devices + * @private: driver-specific data + * @event: event handler. This method is being called by input core with + * interrupts disabled and dev->event_lock spinlock held and so + * it may not sleep + * @filter: similar to @event; separates normal event handlers from + * "filters". + * @match: called after comparing device's id with handler's id_table + * to perform fine-grained matching between device and handler + * @connect: called when attaching a handler to an input device + * @disconnect: disconnects a handler from input device + * @start: starts handler for given handle. This function is called by + * input core right after connect() method and also when a process + * that "grabbed" a device releases it + * @fops: file operations this driver implements + * @minor: beginning of range of 32 minors for devices this driver + * can provide + * @name: name of the handler, to be shown in /proc/bus/input/handlers + * @id_table: pointer to a table of input_device_ids this driver can + * handle + * @h_list: list of input handles associated with the handler + * @node: for placing the driver onto input_handler_list + * + * Input handlers attach to input devices and create input handles. There + * are likely several handlers attached to any given input device at the + * same time. All of them will get their copy of input event generated by + * the device. + * + * The very same structure is used to implement input filters. Input core + * allows filters to run first and will not pass event to regular handlers + * if any of the filters indicate that the event should be filtered (by + * returning %true from their filter() method). + * + * Note that input core serializes calls to connect() and disconnect() + * methods. + */ +struct input_handler { + + void *private; + + void (*event)(struct input_handle *handle, unsigned int type, unsigned int code, int value); + bool (*filter)(struct input_handle *handle, unsigned int type, unsigned int code, int value); + bool (*match)(struct input_handler *handler, struct input_dev *dev); + int (*connect)(struct input_handler *handler, struct input_dev *dev, const struct input_device_id *id); + void (*disconnect)(struct input_handle *handle); + void (*start)(struct input_handle *handle); + + const struct file_operations *fops; + int minor; + const char *name; + + const struct input_device_id *id_table; + + struct list_head h_list; + struct list_head node; +}; + +/** + * struct input_handle - links input device with an input handler + * @private: handler-specific data + * @open: counter showing whether the handle is 'open', i.e. should deliver + * events from its device + * @name: name given to the handle by handler that created it + * @dev: input device the handle is attached to + * @handler: handler that works with the device through this handle + * @d_node: used to put the handle on device's list of attached handles + * @h_node: used to put the handle on handler's list of handles from which + * it gets events + */ +struct input_handle { + + void *private; + + int open; + const char *name; + + struct input_dev *dev; + struct input_handler *handler; + + struct list_head d_node; + struct list_head h_node; +}; + +struct input_dev *input_allocate_device(void); +void input_free_device(struct input_dev *dev); + +static inline struct input_dev *input_get_device(struct input_dev *dev) +{ + return dev ? to_input_dev(get_device(&dev->dev)) : NULL; +} + +static inline void input_put_device(struct input_dev *dev) +{ + if (dev) + put_device(&dev->dev); +} + +static inline void *input_get_drvdata(struct input_dev *dev) +{ + return dev_get_drvdata(&dev->dev); +} + +static inline void input_set_drvdata(struct input_dev *dev, void *data) +{ + dev_set_drvdata(&dev->dev, data); +} + +int __must_check input_register_device(struct input_dev *); +void input_unregister_device(struct input_dev *); + +void input_reset_device(struct input_dev *); + +int __must_check input_register_handler(struct input_handler *); +void input_unregister_handler(struct input_handler *); + +int input_handler_for_each_handle(struct input_handler *, void *data, + int (*fn)(struct input_handle *, void *)); + +int input_register_handle(struct input_handle *); +void input_unregister_handle(struct input_handle *); + +int input_grab_device(struct input_handle *); +void input_release_device(struct input_handle *); + +int input_open_device(struct input_handle *); +void input_close_device(struct input_handle *); + +int input_flush_device(struct input_handle *handle, struct file *file); + +void input_event(struct input_dev *dev, unsigned int type, unsigned int code, int value); +void input_inject_event(struct input_handle *handle, unsigned int type, unsigned int code, int value); + +static inline void input_report_key(struct input_dev *dev, unsigned int code, int value) +{ + input_event(dev, EV_KEY, code, !!value); +} + +static inline void input_report_rel(struct input_dev *dev, unsigned int code, int value) +{ + input_event(dev, EV_REL, code, value); +} + +static inline void input_report_abs(struct input_dev *dev, unsigned int code, int value) +{ + input_event(dev, EV_ABS, code, value); +} + +static inline void input_report_ff_status(struct input_dev *dev, unsigned int code, int value) +{ + input_event(dev, EV_FF_STATUS, code, value); +} + +static inline void input_report_switch(struct input_dev *dev, unsigned int code, int value) +{ + input_event(dev, EV_SW, code, !!value); +} + +static inline void input_sync(struct input_dev *dev) +{ + input_event(dev, EV_SYN, SYN_REPORT, 0); +} + +static inline void input_mt_sync(struct input_dev *dev) +{ + input_event(dev, EV_SYN, SYN_MT_REPORT, 0); +} + +void input_set_capability(struct input_dev *dev, unsigned int type, unsigned int code); + +/** + * input_set_events_per_packet - tell handlers about the driver event rate + * @dev: the input device used by the driver + * @n_events: the average number of events between calls to input_sync() + * + * If the event rate sent from a device is unusually large, use this + * function to set the expected event rate. This will allow handlers + * to set up an appropriate buffer size for the event stream, in order + * to minimize information loss. + */ +static inline void input_set_events_per_packet(struct input_dev *dev, int n_events) +{ + dev->hint_events_per_packet = n_events; +} + +void input_alloc_absinfo(struct input_dev *dev); +void input_set_abs_params(struct input_dev *dev, unsigned int axis, + int min, int max, int fuzz, int flat); + +#define INPUT_GENERATE_ABS_ACCESSORS(_suffix, _item) \ +static inline int input_abs_get_##_suffix(struct input_dev *dev, \ + unsigned int axis) \ +{ \ + return dev->absinfo ? dev->absinfo[axis]._item : 0; \ +} \ + \ +static inline void input_abs_set_##_suffix(struct input_dev *dev, \ + unsigned int axis, int val) \ +{ \ + input_alloc_absinfo(dev); \ + if (dev->absinfo) \ + dev->absinfo[axis]._item = val; \ +} + +INPUT_GENERATE_ABS_ACCESSORS(val, value) +INPUT_GENERATE_ABS_ACCESSORS(min, minimum) +INPUT_GENERATE_ABS_ACCESSORS(max, maximum) +INPUT_GENERATE_ABS_ACCESSORS(fuzz, fuzz) +INPUT_GENERATE_ABS_ACCESSORS(flat, flat) +INPUT_GENERATE_ABS_ACCESSORS(res, resolution) + +int input_scancode_to_scalar(const struct input_keymap_entry *ke, + unsigned int *scancode); + +int input_get_keycode(struct input_dev *dev, struct input_keymap_entry *ke); +int input_set_keycode(struct input_dev *dev, + const struct input_keymap_entry *ke); + +extern struct class input_class; + +/** + * struct ff_device - force-feedback part of an input device + * @upload: Called to upload an new effect into device + * @erase: Called to erase an effect from device + * @playback: Called to request device to start playing specified effect + * @set_gain: Called to set specified gain + * @set_autocenter: Called to auto-center device + * @destroy: called by input core when parent input device is being + * destroyed + * @private: driver-specific data, will be freed automatically + * @ffbit: bitmap of force feedback capabilities truly supported by + * device (not emulated like ones in input_dev->ffbit) + * @mutex: mutex for serializing access to the device + * @max_effects: maximum number of effects supported by device + * @effects: pointer to an array of effects currently loaded into device + * @effect_owners: array of effect owners; when file handle owning + * an effect gets closed the effect is automatically erased + * + * Every force-feedback device must implement upload() and playback() + * methods; erase() is optional. set_gain() and set_autocenter() need + * only be implemented if driver sets up FF_GAIN and FF_AUTOCENTER + * bits. + * + * Note that playback(), set_gain() and set_autocenter() are called with + * dev->event_lock spinlock held and interrupts off and thus may not + * sleep. + */ +struct ff_device { + int (*upload)(struct input_dev *dev, struct ff_effect *effect, + struct ff_effect *old); + int (*erase)(struct input_dev *dev, int effect_id); + + int (*playback)(struct input_dev *dev, int effect_id, int value); + void (*set_gain)(struct input_dev *dev, u16 gain); + void (*set_autocenter)(struct input_dev *dev, u16 magnitude); + + void (*destroy)(struct ff_device *); + + void *private; + + unsigned long ffbit[BITS_TO_LONGS(FF_CNT)]; + + struct mutex mutex; + + int max_effects; + struct ff_effect *effects; + struct file *effect_owners[]; +}; + +int input_ff_create(struct input_dev *dev, int max_effects); +void input_ff_destroy(struct input_dev *dev); + +int input_ff_event(struct input_dev *dev, unsigned int type, unsigned int code, int value); + +int input_ff_upload(struct input_dev *dev, struct ff_effect *effect, struct file *file); +int input_ff_erase(struct input_dev *dev, int effect_id, struct file *file); + +int input_ff_create_memless(struct input_dev *dev, void *data, + int (*play_effect)(struct input_dev *, void *, struct ff_effect *)); + +#endif +#endif Index: files/uinput.h @@ -0,0 +1,176 @@ +#ifndef __UINPUT_H_ +#define __UINPUT_H_ +/* + * User level driver support for input subsystem + * + * Heavily based on evdev.c by Vojtech Pavlik + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + * Author: Aristeu Sergio Rozanski Filho + * + * Changes/Revisions: + * 0.3 24/05/2006 (Anssi Hannula ) + * - update ff support for the changes in kernel interface + * - add UINPUT_VERSION + * 0.2 16/10/2004 (Micah Dowty ) + * - added force feedback support + * - added UI_SET_PHYS + * 0.1 20/06/2002 + * - first public version + */ + +#include + +#define UINPUT_VERSION 3 + +#ifdef __KERNEL__ +#define UINPUT_NAME "uinput" +#define UINPUT_BUFFER_SIZE 16 +#define UINPUT_NUM_REQUESTS 16 + +enum uinput_state { UIST_NEW_DEVICE, UIST_SETUP_COMPLETE, UIST_CREATED }; + +struct uinput_request { + int id; + int code; /* UI_FF_UPLOAD, UI_FF_ERASE */ + + int retval; + struct completion done; + + union { + int effect_id; + struct { + struct ff_effect *effect; + struct ff_effect *old; + } upload; + } u; +}; + +struct uinput_device { + struct input_dev *dev; + struct mutex mutex; + enum uinput_state state; + wait_queue_head_t waitq; + unsigned char ready; + unsigned char head; + unsigned char tail; + struct input_event buff[UINPUT_BUFFER_SIZE]; + int ff_effects_max; + + struct uinput_request *requests[UINPUT_NUM_REQUESTS]; + wait_queue_head_t requests_waitq; + spinlock_t requests_lock; +}; +#endif /* __KERNEL__ */ + +struct uinput_ff_upload { + int request_id; + int retval; + struct ff_effect effect; + struct ff_effect old; +}; + +struct uinput_ff_erase { + int request_id; + int retval; + int effect_id; +}; + +/* ioctl */ +#define UINPUT_IOCTL_BASE 'U' +#define UI_DEV_CREATE _IO(UINPUT_IOCTL_BASE, 1) +#define UI_DEV_DESTROY _IO(UINPUT_IOCTL_BASE, 2) + +#define UI_SET_EVBIT _IOW(UINPUT_IOCTL_BASE, 100, int) +#define UI_SET_KEYBIT _IOW(UINPUT_IOCTL_BASE, 101, int) +#define UI_SET_RELBIT _IOW(UINPUT_IOCTL_BASE, 102, int) +#define UI_SET_ABSBIT _IOW(UINPUT_IOCTL_BASE, 103, int) +#define UI_SET_MSCBIT _IOW(UINPUT_IOCTL_BASE, 104, int) +#define UI_SET_LEDBIT _IOW(UINPUT_IOCTL_BASE, 105, int) +#define UI_SET_SNDBIT _IOW(UINPUT_IOCTL_BASE, 106, int) +#define UI_SET_FFBIT _IOW(UINPUT_IOCTL_BASE, 107, int) +#define UI_SET_PHYS _IOW(UINPUT_IOCTL_BASE, 108, char*) +#define UI_SET_SWBIT _IOW(UINPUT_IOCTL_BASE, 109, int) +#define UI_SET_PROPBIT _IOW(UINPUT_IOCTL_BASE, 110, int) + +#define UI_BEGIN_FF_UPLOAD _IOWR(UINPUT_IOCTL_BASE, 200, struct uinput_ff_upload) +#define UI_END_FF_UPLOAD _IOW(UINPUT_IOCTL_BASE, 201, struct uinput_ff_upload) +#define UI_BEGIN_FF_ERASE _IOWR(UINPUT_IOCTL_BASE, 202, struct uinput_ff_erase) +#define UI_END_FF_ERASE _IOW(UINPUT_IOCTL_BASE, 203, struct uinput_ff_erase) + +/* + * To write a force-feedback-capable driver, the upload_effect + * and erase_effect callbacks in input_dev must be implemented. + * The uinput driver will generate a fake input event when one of + * these callbacks are invoked. The userspace code then uses + * ioctls to retrieve additional parameters and send the return code. + * The callback blocks until this return code is sent. + * + * The described callback mechanism is only used if ff_effects_max + * is set. + * + * To implement upload_effect(): + * 1. Wait for an event with type == EV_UINPUT and code == UI_FF_UPLOAD. + * A request ID will be given in 'value'. + * 2. Allocate a uinput_ff_upload struct, fill in request_id with + * the 'value' from the EV_UINPUT event. + * 3. Issue a UI_BEGIN_FF_UPLOAD ioctl, giving it the + * uinput_ff_upload struct. It will be filled in with the + * ff_effects passed to upload_effect(). + * 4. Perform the effect upload, and place a return code back into + the uinput_ff_upload struct. + * 5. Issue a UI_END_FF_UPLOAD ioctl, also giving it the + * uinput_ff_upload_effect struct. This will complete execution + * of our upload_effect() handler. + * + * To implement erase_effect(): + * 1. Wait for an event with type == EV_UINPUT and code == UI_FF_ERASE. + * A request ID will be given in 'value'. + * 2. Allocate a uinput_ff_erase struct, fill in request_id with + * the 'value' from the EV_UINPUT event. + * 3. Issue a UI_BEGIN_FF_ERASE ioctl, giving it the + * uinput_ff_erase struct. It will be filled in with the + * effect ID passed to erase_effect(). + * 4. Perform the effect erasure, and place a return code back + * into the uinput_ff_erase struct. + * 5. Issue a UI_END_FF_ERASE ioctl, also giving it the + * uinput_ff_erase_effect struct. This will complete execution + * of our erase_effect() handler. + */ + +/* + * This is the new event type, used only by uinput. + * 'code' is UI_FF_UPLOAD or UI_FF_ERASE, and 'value' + * is the unique request ID. This number was picked + * arbitrarily, above EV_MAX (since the input system + * never sees it) but in the range of a 16-bit int. + */ +#define EV_UINPUT 0x0101 +#define UI_FF_UPLOAD 1 +#define UI_FF_ERASE 2 + +#define UINPUT_MAX_NAME_SIZE 80 +struct uinput_user_dev { + char name[UINPUT_MAX_NAME_SIZE]; + struct input_id id; + int ff_effects_max; + int absmax[ABS_CNT]; + int absmin[ABS_CNT]; + int absfuzz[ABS_CNT]; + int absflat[ABS_CNT]; +}; +#endif /* __UINPUT_H_ */ +