MADT: Found CPU APIC ID 255 ACPI ID 27: disabled MADT: Found CPU APIC ID 255 ACPI ID 28: disabled MADT: Found CPU APIC ID 255 ACPI ID 29: disabled MADT: Found CPU APIC ID 255 ACPI ID 30: disabled MADT: Found CPU APIC ID 255 ACPI ID 31: disabled Event timer "LAPIC" quality 600 ACPI APIC Table: Package ID shift: 7 L3 cache ID shift: 7 L2 cache ID shift: 3 L1 cache ID shift: 1 Core ID shift: 1 AP boot address 0x9e000 INTR: Adding local APIC 8 as a target INTR: Adding local APIC 16 as a target INTR: Adding local APIC 24 as a target INTR: Adding local APIC 32 as a target INTR: Adding local APIC 40 as a target INTR: Adding local APIC 48 as a target INTR: Adding local APIC 50 as a target INTR: Adding local APIC 52 as a target INTR: Adding local APIC 54 as a target INTR: Adding local APIC 56 as a target INTR: Adding local APIC 58 as a target INTR: Adding local APIC 60 as a target INTR: Adding local APIC 62 as a target FreeBSD/SMP: Multiprocessor System Detected: 20 CPUs FreeBSD/SMP: Non-uniform topology Package HW ID = 0 Core HW ID = 0 CPU0 (BSP): APIC ID: 0 CPU1 (AP/HT): APIC ID: 1 Core HW ID = 4 CPU2 (AP): APIC ID: 8 CPU3 (AP/HT): APIC ID: 9 Core HW ID = 8 CPU4 (AP): APIC ID: 16 CPU5 (AP/HT): APIC ID: 17 Core HW ID = 12 CPU6 (AP): APIC ID: 24 CPU7 (AP/HT): APIC ID: 25 Core HW ID = 16 CPU8 (AP): APIC ID: 32 CPU9 (AP/HT): APIC ID: 33 Core HW ID = 20 CPU10 (AP): APIC ID: 40 CPU11 (AP/HT): APIC ID: 41 Core HW ID = 24 CPU12 (AP): APIC ID: 48 Core HW ID = 25 CPU13 (AP): APIC ID: 50 Core HW ID = 26 CPU14 (AP): APIC ID: 52 Core HW ID = 27 CPU15 (AP): APIC ID: 54 Core HW ID = 28 CPU16 (AP): APIC ID: 56 Core HW ID = 29 CPU17 (AP): APIC ID: 58 Core HW ID = 30 CPU18 (AP): APIC ID: 60 Core HW ID = 31 CPU19 (AP): APIC ID: 62 APIC: CPU 0 has ACPI ID 0 APIC: CPU 1 has ACPI ID 1 APIC: CPU 2 has ACPI ID 2 APIC: CPU 3 has ACPI ID 3 APIC: CPU 4 has ACPI ID 4 APIC: CPU 5 has ACPI ID 5 APIC: CPU 6 has ACPI ID 6 APIC: CPU 7 has ACPI ID 7 APIC: CPU 8 has ACPI ID 8 APIC: CPU 9 has ACPI ID 9 APIC: CPU 10 has ACPI ID 10 APIC: CPU 11 has ACPI ID 11 APIC: CPU 12 has ACPI ID 12 APIC: CPU 13 has ACPI ID 13 APIC: CPU 14 has ACPI ID 14 APIC: CPU 15 has ACPI ID 15 APIC: CPU 16 has ACPI ID 16 APIC: CPU 17 has ACPI ID 17 APIC: CPU 18 has ACPI ID 18 APIC: CPU 19 has ACPI ID 19 Pentium Pro MTRR support enabled x86bios: IVT 0x000000-0x0004ff at 0xfffff80000000000 x86bios: SSEG 0x09e000-0x09efff at 0xfffffe00219d4000 x86bios: ROM 0x0a0000-0x0fefff at 0xfffff800000a0000 random: registering fast source Intel Secure Key RNG random: fast provider: "Intel Secure Key RNG" random: read 4096 bytes from preloaded cache random: read 2048 bytes from platform bootloader random: unblocking device. VIMAGE (virtualized network stack) enabled hostuuid: using d986fd25-10a3-e111-b247-c48508111aa2 ULE: setup cpu 0 ULE: setup cpu 1 ULE: setup cpu 2 ULE: setup cpu 3 ULE: setup cpu 4 ULE: setup cpu 5 ULE: setup cpu 6 ULE: setup cpu 7 ULE: setup cpu 8 ULE: setup cpu 9 ULE: setup cpu 10 ULE: setup cpu 11 ULE: setup cpu 12 ULE: setup cpu 13 ULE: setup cpu 14 ULE: setup cpu 15 ULE: setup cpu 16 ULE: setup cpu 17 ULE: setup cpu 18 ULE: setup cpu 19 ACPI: RSDP 0x0000000044AFE014 000024 (v02 HPQOEM) ACPI: XSDT 0x0000000044AC8188 00014C (v01 HPQOEM SLIC-MPC 00000002 HP 01000013) ACPI: FACP 0x0000000044AC6000 00010C (v05 HPQOEM SLIC-MPC 00000002 HP 00040000) ACPI: DSDT 0x0000000044A41000 08098A (v02 HPQOEM SLIC-MPC 00000002 HP 00040000) ACPI: FACS 0x00000000448CE000 000040 ACPI: UEFI 0x00000000449BE000 000236 (v01 HPQOEM 8BF5 00000001 HP 00040000) ACPI: SSDT 0x0000000044AF9000 003F77 (v02 HPQOEM 8BF5 00001000 HP 20200717) ACPI: SSDT 0x0000000044AF8000 00038C (v02 HPQOEM 8BF5 00000001 HP 20200717) ACPI: SSDT 0x0000000044AF2000 005D34 (v02 HPQOEM 8BF5 00003000 HP 20200717) ACPI: SSDT 0x0000000044AEF000 0029B6 (v02 HPQOEM 8BF5 00003000 HP 20200717) ACPI: SSDT 0x0000000044AEB000 003258 (v02 HPQOEM 8BF5 00003000 HP 20200717) ACPI: SSDT 0x0000000044ADD000 00D487 (v02 HPQOEM 8BF5 00001000 HP 20200717) ACPI: SSDT 0x0000000044ADC000 0008EA (v01 HPQOEM 8BF5 00001000 HP 20200717) ACPI: SSDT 0x0000000044ADB000 00077B (v02 HPQOEM 8BF5 00001000 HP 20200717) ACPI: TPM2 0x0000000044ADA000 00004C (v04 HPQOEM 8BF5 00000002 HP 00040000) ACPI: SSDT 0x0000000044AD9000 00017D (v01 HPQOEM 8BF5 00001000 HP 20200717) ACPI: SSDT 0x0000000044AD2000 006A50 (v01 HPQOEM 8BF5 00001000 HP 20200717) ACPI: MSDM 0x0000000044AD1000 000055 (v03 HPQOEM SLIC-MPC 00000001 HP 00040000) ACPI: SSDT 0x0000000044AD0000 000FC3 (v02 HPQOEM 8BF5 00001000 HP 20200717) ACPI: LPIT 0x0000000044ACF000 0000CC (v01 HPQOEM 8BF5 00000002 HP 00040000) ACPI: WSMT 0x0000000044ACE000 000028 (v01 HPQOEM 8BF5 00000002 HP 00040000) ACPI: SSDT 0x0000000044ACD000 000AD9 (v02 HPQOEM 8BF5 00001000 HP 20200717) ACPI: SSDT 0x0000000044ACA000 002357 (v02 HPQOEM 8BF5 00000000 HP 20200717) ACPI: DBGP 0x0000000044AC9000 000034 (v01 HPQOEM SLIC-MPC 00000002 HP 00040000) ACPI: DBG2 0x0000000044AFD000 000054 (v00 HPQOEM 8BF5 00000002 HP 00040000) ACPI: NHLT 0x0000000044AC7000 000F4E (v00 HPQOEM 8BF5 00000002 HP 00040000) ACPI: HPET 0x0000000044AC5000 000038 (v01 HPQOEM 8BF5 00000002 HP 00040000) ACPI: APIC 0x0000000044AC4000 0001DC (v03 HPQOEM SLIC-MPC 00000002 HP 00040000) ACPI: MCFG 0x0000000044AC3000 00003C (v01 HPQOEM 8BF5 00000002 HP 00040000) ACPI: SLIC 0x0000000044AC2000 000176 (v01 HPQOEM 8BF5 00000002 HP 00040000) ACPI: SSDT 0x0000000044A40000 000189 (v01 HPQOEM 8BF5 00000002 HP 01000013) ACPI: SSDT 0x0000000044A3D000 0023D6 (v02 HPQOEM 8BF5 00000002 HP 01000013) ACPI: SSDT 0x0000000044A3B000 001D0E (v02 HPQOEM 8BF5 00000002 HP 01000013) ACPI: DMAR 0x0000000044A3A000 000088 (v02 HPQOEM 8BF5 00000002 HP 00040000) ACPI: SSDT 0x0000000044A39000 000C32 (v02 HPQOEM 8BF5 00000000 HP 20200717) ACPI: SSDT 0x0000000044A35000 003AEA (v02 HPQOEM 8BF5 00003000 HP 20200717) ACPI: SSDT 0x0000000044A31000 0039DA (v02 HPQOEM 8BF5 00003000 HP 20200717) ACPI: SSDT 0x0000000044A30000 0000F8 (v01 HPQOEM 8BF5 00001000 HP 20200717) ACPI: FPDT 0x0000000044A2F000 000044 (v01 HPQOEM SLIC-MPC 00000002 HP 00040000) ACPI: BGRT 0x0000000044A2E000 000038 (v01 HPQOEM 8BF5 00000001 HP 00040000) ACPI: PHAT 0x0000000044A2D000 0007DC (v01 HPQOEM 8BF5 00000005 HP 00040000) MADT: Found IO APIC ID 2, Interrupt 0 at 0xfec00000 ioapic0: ver 0x20 maxredir 0x77 ioapic0: Routing external 8259A's -> intpin 0 MADT: Interrupt override: source 0, irq 2 ioapic0: Routing IRQ 0 -> intpin 2 MADT: Interrupt override: source 9, irq 9 ioapic0: intpin 9 trigger: level lapic1: Routing NMI -> LINT1 lapic1: LINT1 trigger: edge lapic1: LINT1 polarity: high lapic8: Routing NMI -> LINT1 lapic8: LINT1 trigger: edge lapic8: LINT1 polarity: high lapic9: Routing NMI -> LINT1 lapic9: LINT1 trigger: edge lapic9: LINT1 polarity: high lapic16: Routing NMI -> LINT1 lapic16: LINT1 trigger: edge lapic16: LINT1 polarity: high lapic17: Routing NMI -> LINT1 lapic17: LINT1 trigger: edge lapic17: LINT1 polarity: high lapic24: Routing NMI -> LINT1 lapic24: LINT1 trigger: edge lapic24: LINT1 polarity: high lapic25: Routing NMI -> LINT1 lapic25: LINT1 trigger: edge lapic25: LINT1 polarity: high lapic32: Routing NMI -> LINT1 lapic32: LINT1 trigger: edge lapic32: LINT1 polarity: high lapic33: Routing NMI -> LINT1 lapic33: LINT1 trigger: edge lapic33: LINT1 polarity: high lapic40: Routing NMI -> LINT1 lapic40: LINT1 trigger: edge lapic40: LINT1 polarity: high lapic41: Routing NMI -> LINT1 lapic41: LINT1 trigger: edge lapic41: LINT1 polarity: high lapic48: Routing NMI -> LINT1 lapic48: LINT1 trigger: edge lapic48: LINT1 polarity: high lapic50: Routing NMI -> LINT1 lapic50: LINT1 trigger: edge lapic50: LINT1 polarity: high lapic52: Routing NMI -> LINT1 lapic52: LINT1 trigger: edge lapic52: LINT1 polarity: high lapic54: Routing NMI -> LINT1 lapic54: LINT1 trigger: edge lapic54: LINT1 polarity: high lapic56: Routing NMI -> LINT1 lapic56: LINT1 trigger: edge lapic56: LINT1 polarity: high lapic58: Routing NMI -> LINT1 lapic58: LINT1 trigger: edge lapic58: LINT1 polarity: high lapic60: Routing NMI -> LINT1 lapic60: LINT1 trigger: edge lapic60: LINT1 polarity: high lapic62: Routing NMI -> LINT1 lapic62: LINT1 trigger: edge lapic62: LINT1 polarity: high MADT: Ignoring local NMI routed to ACPI CPU 20 MADT: Ignoring local NMI routed to ACPI CPU 21 MADT: Ignoring local NMI routed to ACPI CPU 22 MADT: Ignoring local NMI routed to ACPI CPU 23 lapic0: Routing NMI -> LINT1 lapic0: LINT1 trigger: edge lapic0: LINT1 polarity: high ioapic0 irqs 0-119 cpu0 BSP: ID: 0x00000000 VER: 0x01060015 LDR: 0x00000001 DFR: 0x00000000 x2APIC: 1 lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000011ff timer: 0x000300ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400 cmci: 0x000000f2 SMP: AP CPU #1 Launched! cpu1 AP: ID: 0x00000001 VER: 0x01060015 LDR: 0x00000002 DFR: 0x00000000 x2APIC: 1 lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000011ff timer: 0x000100ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400 cmci: 0x000000f2 SMP: AP CPU #8 Launched! cpu8 AP: ID: 0x00000020 VER: 0x01060015 LDR: 0x00020001 DFR: 0x00000000 x2APIC: 1 lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000011ff timer: 0x000100ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400 cmci: 0x000000f2 SMP: AP CPU #10 Launched! cpu10 AP: ID: 0x00000028 VER: 0x01060015 LDR: 0x00020100 DFR: 0x00000000 x2APIC: 1 lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000011ff timer: 0x000100ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400 cmci: 0x000000f2 SMP: AP CPU #2 Launched! cpu2 AP: ID: 0x00000008 VER: 0x01060015 LDR: 0x00000100 DFR: 0x00000000 x2APIC: 1 lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000011ff timer: 0x000100ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400 cmci: 0x000000f2 SMP: AP CPU #15 Launched! cpu15 AP: ID: 0x00000036 VER: 0x01060015 LDR: 0x00030040 DFR: 0x00000000 x2APIC: 1 lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000011ff timer: 0x000100ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400 cmci: 0x000000f2 SMP: AP CPU #12 Launched! cpu12 AP: ID: 0x00000030 VER: 0x01060015 LDR: 0x00030001 DFR: 0x00000000 x2APIC: 1 lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000011ff timer: 0x000100ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400 cmci: 0x000000f2 SMP: AP CPU #11 Launched! cpu11 AP: ID: 0x00000029 VER: 0x01060015 LDR: 0x00020200 DFR: 0x00000000 x2APIC: 1 lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000011ff timer: 0x000100ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400 cmci: 0x000000f2 SMP: AP CPU #6 Launched! cpu6 AP: ID: 0x00000018 VER: 0x01060015 LDR: 0x00010100 DFR: 0x00000000 x2APIC: 1 lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000011ff timer: 0x000100ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400 cmci: 0x000000f2 SMP: AP CPU #7 Launched! cpu7 AP: ID: 0x00000019 VER: 0x01060015 LDR: 0x00010200 DFR: 0x00000000 x2APIC: 1 lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000011ff timer: 0x000100ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400 cmci: 0x000000f2 SMP: AP CPU #14 Launched! cpu14 AP: ID: 0x00000034 VER: 0x01060015 LDR: 0x00030010 DFR: 0x00000000 x2APIC: 1 lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000011ff timer: 0x000100ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400 cmci: 0x000000f2 SMP: AP CPU #4 Launched! cpu4 AP: ID: 0x00000010 VER: 0x01060015 LDR: 0x00010001 DFR: 0x00000000 x2APIC: 1 lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000011ff timer: 0x000100ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400 cmci: 0x000000f2 SMP: AP CPU #19 Launched! cpu19 AP: ID: 0x0000003e VER: 0x01060015 LDR: 0x00034000 DFR: 0x00000000 x2APIC: 1 lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000011ff timer: 0x000100ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400 cmci: 0x000000f2 SMP: AP CPU #18 Launched! cpu18 AP: ID: 0x0000003c VER: 0x01060015 LDR: 0x00031000 DFR: 0x00000000 x2APIC: 1 lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000011ff timer: 0x000100ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400 cmci: 0x000000f2 SMP: AP CPU #17 Launched! cpu17 AP: ID: 0x0000003a VER: 0x01060015 LDR: 0x00030400 DFR: 0x00000000 x2APIC: 1 lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000011ff timer: 0x000100ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400 cmci: 0x000000f2 SMP: AP CPU #16 Launched! cpu16 AP: ID: 0x00000038 VER: 0x01060015 LDR: 0x00030100 DFR: 0x00000000 x2APIC: 1 lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000011ff timer: 0x000100ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400 cmci: 0x000000f2 SMP: AP CPU #13 Launched! cpu13 AP: ID: 0x00000032 VER: 0x01060015 LDR: 0x00030004 DFR: 0x00000000 x2APIC: 1 lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000011ff timer: 0x000100ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400 cmci: 0x000000f2 SMP: AP CPU #9 Launched! cpu9 AP: ID: 0x00000021 VER: 0x01060015 LDR: 0x00020002 DFR: 0x00000000 x2APIC: 1 lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000011ff timer: 0x000100ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400 cmci: 0x000000f2 SMP: AP CPU #5 Launched! cpu5 AP: ID: 0x00000011 VER: 0x01060015 LDR: 0x00010002 DFR: 0x00000000 x2APIC: 1 lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000011ff timer: 0x000100ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400 cmci: 0x000000f2 SMP: AP CPU #3 Launched! cpu3 AP: ID: 0x00000009 VER: 0x01060015 LDR: 0x00000200 DFR: 0x00000000 x2APIC: 1 lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000011ff timer: 0x000100ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400 cmci: 0x000000f2 SMP: passed TSC synchronization test TSC timecounter discards lower 1 bit(s) random: entropy device external interface snd_unit_init() u=0x00ff8000 [512] d=0x00007c00 [32] c=0x000003ff [1024] feeder_register: snd_unit=-1 snd_maxautovchans=16 latency=2 feeder_rate_min=1 feeder_rate_max=2016000 feeder_rate_round=25 wlan: <802.11 Link Layer> [ath_hal] loaded kbd: new array size 4 kbd1 at kbdmux0 mem: null: tcp_log: tcp_log device crypto: io: efirtc0: efirtc0: registered as a time-of-day clock, resolution 1.000000s smbios0: at iomem 0x3fa8b000-0x3fa8b01e smbios0: Version: 3.4, BCD Revision: 3.4 crypto: assign cryptosoft0 driver id 0, flags 0x6000000 aesni0: crypto: assign aesni0 driver id 1, flags 0xe000000 acpi0: Firmware Error (ACPI): Failure creating named object [\134_TZ.ETMD], AE_ALREADY_EXISTS (20221020/dswload2-480) ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20221020/psobject-372) Firmware Error (ACPI): Failure creating named object [\134_TZ.FCET], AE_ALREADY_EXISTS (20221020/dswload2-480) ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20221020/psobject-372) Firmware Error (ACPI): Failure creating named object [\134_TZ.FCRN], AE_ALREADY_EXISTS (20221020/dswload2-480) ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20221020/psobject-372) Firmware Error (ACPI): Failure creating named object [\134_TZ.FCMT], AE_ALREADY_EXISTS (20221020/dswload2-480) ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20221020/psobject-372) Firmware Error (ACPI): Failure creating named object [\134_TZ.CVF0], AE_ALREADY_EXISTS (20221020/dswload2-480) ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20221020/psobject-372) Firmware Error (ACPI): Failure creating named object [\134_TZ.FMT0], AE_ALREADY_EXISTS (20221020/dswload2-480) ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20221020/psobject-372) Firmware Error (ACPI): Failure creating named object [\134_TZ.FN00], AE_ALREADY_EXISTS (20221020/dswload2-480) ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20221020/psobject-372) ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x5B84) Firmware Error (ACPI): Failure creating named object [\134_TZ.FAN0], AE_ALREADY_EXISTS (20221020/dswload2-480) ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20221020/psobject-372) ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x5B82) ACPI: 21 ACPI AML tables successfully acquired and loaded PCIe: Memory Mapped configuration base @ 0xc0000000 ioapic0: routing intpin 9 (ISA IRQ 9) to lapic 0 vector 48 acpi0: Power Button (fixed) acpi0: wakeup code va 0xfffffe00219ff000 pa 0x9c000 hpet0: iomem 0xfed00000-0xfed003ff on acpi0 hpet0: vendor 0x8086, rev 0x1, 19200000Hz 64bit, 8 timers, legacy route hpet0: t0: irqs 0x00f00000 (0), MSI, 64bit, periodic hpet0: t1: irqs 0x00f00000 (0), MSI hpet0: t2: irqs 0x00f00800 (0), MSI hpet0: t3: irqs 0x00f01000 (0), MSI hpet0: t4: irqs 0x00000000 (0), MSI hpet0: t5: irqs 0x00000000 (0), MSI hpet0: t6: irqs 0x00000000 (0), MSI hpet0: t7: irqs 0x00000000 (0), MSI Timecounter "HPET" frequency 19200000 Hz quality 950 msi: routing MSI-X IRQ 120 to local APIC 8 vector 48 msi: routing MSI-X IRQ 121 to local APIC 16 vector 48 msi: routing MSI-X IRQ 122 to local APIC 24 vector 48 msi: routing MSI-X IRQ 123 to local APIC 32 vector 48 msi: routing MSI-X IRQ 124 to local APIC 40 vector 48 msi: routing MSI-X IRQ 125 to local APIC 48 vector 48 msi: routing MSI-X IRQ 126 to local APIC 50 vector 48 msi: routing MSI-X IRQ 127 to local APIC 52 vector 48 msi: Assigning MSI-X IRQ 120 to local APIC 0 vector 49 msi: Assigning MSI-X IRQ 121 to local APIC 0 vector 50 msi: Assigning MSI-X IRQ 122 to local APIC 0 vector 51 msi: Assigning MSI-X IRQ 123 to local APIC 0 vector 52 msi: Assigning MSI-X IRQ 124 to local APIC 0 vector 53 msi: Assigning MSI-X IRQ 125 to local APIC 0 vector 54 msi: Assigning MSI-X IRQ 126 to local APIC 0 vector 55 msi: Assigning MSI-X IRQ 127 to local APIC 0 vector 56 Event timer "HPET" frequency 19200000 Hz quality 350 Event timer "HPET1" frequency 19200000 Hz quality 340 Event timer "HPET2" frequency 19200000 Hz quality 340 Event timer "HPET3" frequency 19200000 Hz quality 340 Event timer "HPET4" frequency 19200000 Hz quality 340 Event timer "HPET5" frequency 19200000 Hz quality 340 Event timer "HPET6" frequency 19200000 Hz quality 340 Event timer "HPET7" frequency 19200000 Hz quality 340 atrtc1: on acpi0 atrtc1: Warning: Couldn't map I/O. atrtc1: registered as a time-of-day clock, resolution 1.000000s ioapic0: routing intpin 8 (ISA IRQ 8) to lapic 54 vector 48 ioapic0: routing intpin 8 (ISA IRQ 8) to lapic 0 vector 57 Event timer "RTC" frequency 32768 Hz quality 0 attimer0: port 0x40-0x43,0x50-0x53 irq 0 on acpi0 Timecounter "i8254" frequency 1193182 Hz quality 0 ioapic0: routing intpin 2 (ISA IRQ 0) to lapic 56 vector 48 Event timer "i8254" frequency 1193182 Hz quality 100 ACPI timer: -> 10 Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0 acpi_ec0: port 0x62,0x66,0x68-0x6f iomem 0xfe800000-0xfe80ffff on acpi0 pcib0: port 0xcf8-0xcff on acpi0 pcib0: decoding 5 range 0-0xfe pcib0: decoding 4 range 0-0xcf7 pcib0: decoding 4 range 0xd00-0xffff pcib0: decoding 3 range 0xa0000-0xbffff pcib0: decoding 3 range 0x50400000-0xbfffffff pcib0: decoding 3 range 0x4000000000-0x7fffffffff pcib0: decoding 3 range 0xfe800000-0xfe80ffff pci0: on pcib0 pci0: domain=0, physical bus=0 found-> vendor=0x8086, dev=0xa706, revid=0x00 domain=0, bus=0, slot=0, func=0 class=06-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0006, statreg=0x2090, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0xa7a0, revid=0x04 domain=0, bus=0, slot=2, func=0 class=03-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=255 powerspec 2 supports D0 D3 current D0 MSI supports 1 message, vector masks map[10]: type Memory, range 64, base 0x6000000000, size 24, enabled pcib0: allocated type 3 (0x6000000000-0x6000ffffff) for rid 10 of pci0:0:2:0 map[18]: type Prefetchable Memory, range 64, base 0x4000000000, size 28, enabled pcib0: allocated type 3 (0x4000000000-0x400fffffff) for rid 18 of pci0:0:2:0 map[20]: type I/O Port, range 32, base 0x3000, size 6, enabled pcib0: allocated type 4 (0x3000-0x303f) for rid 20 of pci0:0:2:0 found-> vendor=0x8086, dev=0xa71d, revid=0x00 domain=0, bus=0, slot=4, func=0 class=11-80-00, hdrtype=0x00, mfdev=0 cmdreg=0x0000, statreg=0x0090, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=255 powerspec 3 supports D0 D3 current D0 MSI supports 1 message map[10]: type Memory, range 64, base 0x6001100000, size 17, memory disabled pcib0: allocated type 3 (0x6001100000-0x600111ffff) for rid 10 of pci0:0:4:0 found-> vendor=0x8086, dev=0xa74d, revid=0x00 domain=0, bus=0, slot=6, func=0 class=06-04-00, hdrtype=0x01, mfdev=1 cmdreg=0x0107, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=d, irq=255 powerspec 3 supports D0 D3 current D0 MSI supports 1 message secbus=1, subbus=1 found-> vendor=0x8086, dev=0xa74f, revid=0x00 domain=0, bus=0, slot=8, func=0 class=08-80-00, hdrtype=0x00, mfdev=0 cmdreg=0x0000, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=255 powerspec 2 supports D0 D3 current D0 MSI supports 1 message map[10]: type Memory, range 64, base 0x6001150000, size 12, memory disabled pcib0: allocated type 3 (0x6001150000-0x6001150fff) for rid 10 of pci0:0:8:0 found-> vendor=0x8086, dev=0xa77d, revid=0x01 domain=0, bus=0, slot=10, func=0 class=11-80-00, hdrtype=0x00, mfdev=0 cmdreg=0x0002, statreg=0x0010, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) powerspec 3 supports D0 D3 current D0 map[10]: type Memory, range 64, base 0x6001130000, size 15, enabled pcib0: allocated type 3 (0x6001130000-0x6001137fff) for rid 10 of pci0:0:10:0 found-> vendor=0x8086, dev=0xa71e, revid=0x00 domain=0, bus=0, slot=13, func=0 class=0c-03-30, hdrtype=0x00, mfdev=1 cmdreg=0x0006, statreg=0x0290, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) powerspec 2 supports D0 D3 current D0 MSI supports 8 messages, 64 bit map[10]: type Memory, range 64, base 0x6001120000, size 16, enabled pcib0: allocated type 3 (0x6001120000-0x600112ffff) for rid 10 of pci0:0:13:0 found-> vendor=0x8086, dev=0x51ed, revid=0x01 domain=0, bus=0, slot=20, func=0 class=0c-03-30, hdrtype=0x00, mfdev=1 cmdreg=0x0006, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=255 powerspec 2 supports D0 D3 current D0 MSI supports 8 messages, 64 bit map[10]: type Memory, range 64, base 0x50600000, size 16, enabled pcib0: allocated type 3 (0x50600000-0x5060ffff) for rid 10 of pci0:0:20:0 found-> vendor=0x8086, dev=0x51ef, revid=0x01 domain=0, bus=0, slot=20, func=2 class=05-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0000, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) powerspec 3 supports D0 D3 current D0 map[10]: type Memory, range 64, base 0x6001148000, size 14, memory disabled pcib0: allocated type 3 (0x6001148000-0x600114bfff) for rid 10 of pci0:0:20:2 map[18]: type Memory, range 64, base 0x600114f000, size 12, enabled pcib0: allocated type 3 (0x600114f000-0x600114ffff) for rid 18 of pci0:0:20:2 found-> vendor=0x8086, dev=0x51f1, revid=0x01 domain=0, bus=0, slot=20, func=3 class=02-80-00, hdrtype=0x00, mfdev=1 cmdreg=0x0000, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=255 powerspec 3 supports D0 D3 current D0 MSI supports 1 message, 64 bit MSI-X supports 16 messages in map 0x10 map[10]: type Memory, range 64, base 0x6001144000, size 14, memory disabled pcib0: allocated type 3 (0x6001144000-0x6001147fff) for rid 10 of pci0:0:20:3 pci0:0:21:0: Transition from D3 to D0 found-> vendor=0x8086, dev=0x51e8, revid=0x01 domain=0, bus=0, slot=21, func=0 class=0c-80-00, hdrtype=0x00, mfdev=1 cmdreg=0x0000, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=255 powerspec 3 supports D0 D3 current D0 map[10]: type Memory, range 64, base 0, size 12, memory disabled found-> vendor=0x8086, dev=0x51e0, revid=0x01 domain=0, bus=0, slot=22, func=0 class=07-80-00, hdrtype=0x00, mfdev=1 cmdreg=0x0000, statreg=0x0010, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=255 powerspec 3 supports D0 D3 current D0 MSI supports 1 message, 64 bit map[10]: type Memory, range 64, base 0x600114d000, size 12, memory disabled pcib0: allocated type 3 (0x600114d000-0x600114dfff) for rid 10 of pci0:0:22:0 found-> vendor=0x8086, dev=0x51bb, revid=0x01 domain=0, bus=0, slot=28, func=0 class=06-04-00, hdrtype=0x01, mfdev=1 cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=d, irq=255 powerspec 3 supports D0 D3 current D0 MSI supports 1 message secbus=2, subbus=2 found-> vendor=0x8086, dev=0x519d, revid=0x01 domain=0, bus=0, slot=31, func=0 class=06-01-00, hdrtype=0x00, mfdev=1 cmdreg=0x0407, statreg=0x0000, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x51ca, revid=0x01 domain=0, bus=0, slot=31, func=3 class=04-01-00, hdrtype=0x00, mfdev=0 cmdreg=0x0000, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=255 powerspec 3 supports D0 D3 current D0 MSI supports 1 message, 64 bit map[10]: type Memory, range 64, base 0x6001140000, size 14, memory disabled pcib0: allocated type 3 (0x6001140000-0x6001143fff) for rid 10 of pci0:0:31:3 map[20]: type Memory, range 64, base 0x6001000000, size 20, enabled pcib0: allocated type 3 (0x6001000000-0x60010fffff) for rid 20 of pci0:0:31:3 found-> vendor=0x8086, dev=0x51a3, revid=0x01 domain=0, bus=0, slot=31, func=4 class=0c-05-00, hdrtype=0x00, mfdev=0 cmdreg=0x0000, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=255 map[10]: type Memory, range 64, base 0x600114c000, size 8, memory disabled pcib0: allocated type 3 (0x600114c000-0x600114c0ff) for rid 10 of pci0:0:31:4 map[20]: type I/O Port, range 32, base 0xefa0, size 5, port disabled pcib0: allocated type 4 (0xefa0-0xefbf) for rid 20 of pci0:0:31:4 found-> vendor=0x8086, dev=0x51a4, revid=0x01 domain=0, bus=0, slot=31, func=5 class=0c-80-00, hdrtype=0x00, mfdev=0 cmdreg=0x0402, statreg=0x0000, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) map[10]: type Memory, range 32, base 0xfe010000, size 12, enabled vgapci0: port 0x3000-0x303f mem 0x6000000000-0x6000ffffff,0x4000000000-0x400fffffff at device 2.0 on pci0 acpi_video0: on vgapci0 vgapci0: Boot video device pci0: at device 4.0 (no driver attached) pci0:0:4:0: Transition from D0 to D3 pcib1: at device 6.0 on pci0 pcib0: allocated type 3 (0x50500000-0x505fffff) for rid 20 of pcib1 pcib1: domain 0 pcib1: secondary bus 1 pcib1: subordinate bus 1 pcib1: memory decode 0x50500000-0x505fffff pci1: on pcib1 pcib1: allocated bus range (1-1) for rid 0 of pci1 pci1: domain=0, physical bus=1 found-> vendor=0x8086, dev=0xf1aa, revid=0x03 domain=0, bus=1, slot=0, func=0 class=01-08-02, hdrtype=0x00, mfdev=0 cmdreg=0x0006, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=255 powerspec 3 supports D0 D3 current D0 MSI supports 8 messages, 64 bit, vector masks MSI-X supports 16 messages in map 0x10 map[10]: type Memory, range 64, base 0x50500000, size 14, enabled pcib1: allocated memory range (0x50500000-0x50503fff) for rid 10 of pci0:1:0:0 nvme0: mem 0x50500000-0x50503fff at device 0.0 on pci1 nvme0: attempting to allocate 16 MSI-X vectors (16 supported) msi: routing MSI-X IRQ 128 to local APIC 58 vector 48 msi: routing MSI-X IRQ 129 to local APIC 60 vector 48 msi: routing MSI-X IRQ 130 to local APIC 62 vector 48 msi: routing MSI-X IRQ 131 to local APIC 0 vector 58 msi: routing MSI-X IRQ 132 to local APIC 8 vector 48 msi: routing MSI-X IRQ 133 to local APIC 16 vector 48 msi: routing MSI-X IRQ 134 to local APIC 24 vector 48 msi: routing MSI-X IRQ 135 to local APIC 32 vector 48 msi: routing MSI-X IRQ 136 to local APIC 40 vector 48 msi: routing MSI-X IRQ 137 to local APIC 48 vector 48 msi: routing MSI-X IRQ 138 to local APIC 50 vector 48 msi: routing MSI-X IRQ 139 to local APIC 52 vector 48 msi: routing MSI-X IRQ 140 to local APIC 54 vector 48 msi: routing MSI-X IRQ 141 to local APIC 56 vector 49 msi: routing MSI-X IRQ 142 to local APIC 58 vector 49 msi: routing MSI-X IRQ 143 to local APIC 60 vector 49 nvme0: using IRQs 128-143 for MSI-X nvme0: CapLo: 0x780100ff: MQES 255, CQR, TO 120 nvme0: CapHi: 0x00100030: DSTRD 0, NSSRS, CSS 1, MPSMIN 0, MPSMAX 1 nvme0: Version: 0x00010400: 1.4 pci0: at device 8.0 (no driver attached) pci0:0:8:0: Transition from D0 to D3 pci0: at device 10.0 (no driver attached) pci0:0:10:0: Transition from D0 to D3 xhci0: mem 0x6001120000-0x600112ffff at device 13.0 on pci0 xhci0: 32 bytes context size, 64-bit DMA xhci0: attempting to allocate 1 MSI vectors (8 supported) msi: routing MSI IRQ 144 to local APIC 62 vector 49 xhci0: using IRQ 144 for MSI xhci0: MSI enabled usbus0 on xhci0 xhci0: usbpf: Attached usbus0: 5.0Gbps Super Speed USB v3.0 xhci1: mem 0x50600000-0x5060ffff at device 20.0 on pci0 xhci1: 32 bytes context size, 64-bit DMA xhci1: attempting to allocate 1 MSI vectors (8 supported) msi: routing MSI IRQ 145 to local APIC 0 vector 59 xhci1: using IRQ 145 for MSI xhci1: MSI enabled usbus1: waiting for BIOS to give up control xhci_interrupt: host controller halted usbus1 on xhci1 xhci1: usbpf: Attached usbus1: 5.0Gbps Super Speed USB v3.0 pci0: at device 20.2 (no driver attached) pci0:0:20:2: Transition from D0 to D3 pci0: at device 20.3 (no driver attached) pci0:0:20:3: Transition from D0 to D3 pci0: set ACPI power state D3 on \134_SB_.PC00.CNVW pci0: at device 21.0 (no driver attached) pci0:0:21:0: Transition from D0 to D3 pci0: set ACPI power state D3 on \134_SB_.PC00.I2C0 pci0: at device 22.0 (no driver attached) pci0:0:22:0: Transition from D0 to D3 pcib2: at device 28.0 on pci0 pcib0: allocated type 3 (0x50400000-0x504fffff) for rid 20 of pcib2 pcib2: domain 0 pcib2: secondary bus 2 pcib2: subordinate bus 2 pcib2: memory decode 0x50400000-0x504fffff pci2: on pcib2 pcib2: allocated bus range (2-2) for rid 0 of pci2 pci2: domain=0, physical bus=2 found-> vendor=0x10ec, dev=0x522a, revid=0x01 domain=0, bus=2, slot=0, func=0 class=ff-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0000, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=255 powerspec 3 supports D0 D1 D2 D3 current D0 MSI supports 1 message, 64 bit map[10]: type Memory, range 32, base 0x50400000, size 12, memory disabled pcib2: allocated memory range (0x50400000-0x50400fff) for rid 10 of pci0:2:0:0 pci2: at device 0.0 (no driver attached) pci0:2:0:0: Transition from D0 to D3 isab0: at device 31.0 on pci0 isa0: on isab0 hdac0: mem 0x6001140000-0x6001143fff,0x6001000000-0x60010fffff at device 31.3 on pci0 hdac0: PCI card vendor: 0x103c, device: 0x8bf4 hdac0: HDA Driver Revision: 20120126_0002 hdac0: Config options: on=0x00000000 off=0x00000000 hdac0: Caps: OSS 9, ISS 7, BSS 0, NSDO 1, 64bit, CORB 256, RIRB 256 hdac0: attempting to allocate 1 MSI vectors (1 supported) msi: routing MSI IRQ 146 to local APIC 8 vector 49 hdac0: using IRQ 146 for MSI pci0: at device 31.4 (no driver attached) pci0: at device 31.5 (no driver attached) cpu0: on acpi0 ACPI: Dynamic OEM Table Load: ACPI: SSDT 0xFFFFF80001DAB000 000394 (v02 PmRef Cpu0Cst 00003001 INTL 20200717) ACPI: Dynamic OEM Table Load: ACPI: SSDT 0xFFFFF80003448000 000668 (v02 PmRef Cpu0Ist 00003000 INTL 20200717) ACPI: Dynamic OEM Table Load: ACPI: SSDT 0xFFFFF80001D9B200 0001AB (v02 PmRef Cpu0Psd 00003000 INTL 20200717) cpu1: on acpi0 ACPI: Dynamic OEM Table Load: ACPI: SSDT 0xFFFFFE00DD178000 001BAF (v02 PmRef ApIst 00003000 INTL 20200717) ACPI: Dynamic OEM Table Load: ACPI: SSDT 0xFFFFFE00DD4A7000 001349 (v02 PmRef ApPsd 00003000 INTL 20200717) ACPI: Dynamic OEM Table Load: ACPI: SSDT 0xFFFFF80003522000 000FBB (v02 PmRef ApCst 00003000 INTL 20200717) cpu2: on acpi0 cpu3: on acpi0 cpu4: on acpi0 cpu5: on acpi0 cpu6: on acpi0 cpu7: on acpi0 cpu8: on acpi0 cpu9: on acpi0 cpu10: on acpi0 cpu11: on acpi0 cpu12: on acpi0 cpu13: on acpi0 cpu14: on acpi0 cpu15: on acpi0 cpu16: on acpi0 cpu17: on acpi0 cpu18: on acpi0 cpu19: on acpi0 ACPI: Processor \134_SB_.PR20 (ACPI ID 20) ignored ACPI: Processor \134_SB_.PR21 (ACPI ID 21) ignored ACPI: Processor \134_SB_.PR22 (ACPI ID 22) ignored ACPI: Processor \134_SB_.PR23 (ACPI ID 23) ignored ACPI: Processor \134_SB_.PR24 (ACPI ID 24) ignored ACPI: Processor \134_SB_.PR25 (ACPI ID 25) ignored ACPI: Processor \134_SB_.PR26 (ACPI ID 26) ignored ACPI: Processor \134_SB_.PR27 (ACPI ID 27) ignored ACPI: Processor \134_SB_.PR28 (ACPI ID 28) ignored ACPI: Processor \134_SB_.PR29 (ACPI ID 29) ignored ACPI: Processor \134_SB_.PR30 (ACPI ID 30) ignored ACPI: Processor \134_SB_.PR31 (ACPI ID 31) ignored ACPI: Processor \134_SB_.PR32 (ACPI ID 32) ignored ACPI: Processor \134_SB_.PR33 (ACPI ID 33) ignored ACPI: Processor \134_SB_.PR34 (ACPI ID 34) ignored ACPI: Processor \134_SB_.PR35 (ACPI ID 35) ignored ACPI: Processor \134_SB_.PR36 (ACPI ID 36) ignored ACPI: Processor \134_SB_.PR37 (ACPI ID 37) ignored ACPI: Processor \134_SB_.PR38 (ACPI ID 38) ignored ACPI: Processor \134_SB_.PR39 (ACPI ID 39) ignored ACPI: Processor \134_SB_.PR40 (ACPI ID 40) ignored ACPI: Processor \134_SB_.PR41 (ACPI ID 41) ignored ACPI: Processor \134_SB_.PR42 (ACPI ID 42) ignored ACPI: Processor \134_SB_.PR43 (ACPI ID 43) ignored ACPI: Processor \134_SB_.PR44 (ACPI ID 44) ignored ACPI: Processor \134_SB_.PR45 (ACPI ID 45) ignored ACPI: Processor \134_SB_.PR46 (ACPI ID 46) ignored ACPI: Processor \134_SB_.PR47 (ACPI ID 47) ignored ACPI: Processor \134_SB_.PR48 (ACPI ID 48) ignored ACPI: Processor \134_SB_.PR49 (ACPI ID 49) ignored ACPI: Processor \134_SB_.PR50 (ACPI ID 50) ignored ACPI: Processor \134_SB_.PR51 (ACPI ID 51) ignored ACPI: Processor \134_SB_.PR52 (ACPI ID 52) ignored ACPI: Processor \134_SB_.PR53 (ACPI ID 53) ignored ACPI: Processor \134_SB_.PR54 (ACPI ID 54) ignored ACPI: Processor \134_SB_.PR55 (ACPI ID 55) ignored ACPI: Processor \134_SB_.PR56 (ACPI ID 56) ignored ACPI: Processor \134_SB_.PR57 (ACPI ID 57) ignored ACPI: Processor \134_SB_.PR58 (ACPI ID 58) ignored ACPI: Processor \134_SB_.PR59 (ACPI ID 59) ignored ACPI: Processor \134_SB_.PR60 (ACPI ID 60) ignored ACPI: Processor \134_SB_.PR61 (ACPI ID 61) ignored ACPI: Processor \134_SB_.PR62 (ACPI ID 62) ignored ACPI: Processor \134_SB_.PR63 (ACPI ID 63) ignored acpi_wmi0: on acpi0 acpi_wmi0: Embedded MOF found ACPI: \134_SB.WFDE.WQCC: 1 arguments were passed to a non-method ACPI object (Buffer) (20221020/nsarguments-361) acpi_wmi1: on acpi0 acpi_wmi1: Embedded MOF found ACPI: \134_SB.MTW0.WQCC: 1 arguments were passed to a non-method ACPI object (Buffer) (20221020/nsarguments-361) acpi_wmi2: on acpi0 acpi_wmi2: Embedded MOF found ACPI: \134_SB.WFTE.WQCC: 1 arguments were passed to a non-method ACPI object (Buffer) (20221020/nsarguments-361) acpi_lid0: on acpi0 acpi_wmi3: on acpi0 acpi_wmi3: Embedded MOF found ACPI: \134_SB.AMW0.WQDD: 1 arguments were passed to a non-method ACPI object (Buffer) (20221020/nsarguments-361) acpi_wmi4: on acpi0 acpi_wmi4: Embedded MOF found ACPI: \134_SB.CPWM.WQBB: 1 arguments were passed to a non-method ACPI object (Buffer) (20221020/nsarguments-361) acpi_wmi5: on acpi0 acpi_wmi5: Embedded MOF found ACPI: \134_SB.WMID.WQAB: 1 arguments were passed to a non-method ACPI object (Buffer) (20221020/nsarguments-361) acpi_hp0: on acpi_wmi5 acpi_hp0: HP event GUID detected, installing event handler acpi_hp0: HP CMI GUID detected acpi_tz0: on acpi0 acpi_tz1: on acpi0 acpi_tz2: on acpi0 acpi_acad0: on acpi0 AcpiOsExecute: task queue not started battery0: on acpi0 AcpiOsExecute: task queue not started atkbdc0: port 0x60,0x64 irq 1 on acpi0 atkbd0: irq 1 on atkbdc0 atkbd: the current kbd controller command byte 0067 atkbd: keyboard ID 0x41ab (2) kbdc: RESET_KBD return code:00fa kbdc: RESET_KBD status:00aa kbd0 at atkbd0 kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x1d0000 ioapic0: routing intpin 1 (ISA IRQ 1) to lapic 16 vector 49 atkbd0: [GIANT-LOCKED] psm0: unable to allocate IRQ acpi_syscontainer0: on acpi0 acpi_syscontainer1: on acpi0 ACPI: Enabled 4 GPEs in block 00 to 7F ahc_isa_identify 0: ioport 0xc00 alloc failed ahc_isa_identify 1: ioport 0x1c00 alloc failed ahc_isa_identify 2: ioport 0x2c00 alloc failed ahc_isa_identify 3: ioport 0x3c00 alloc failed ahc_isa_identify 4: ioport 0x4c00 alloc failed ahc_isa_identify 5: ioport 0x5c00 alloc failed ahc_isa_identify 6: ioport 0x6c00 alloc failed ahc_isa_identify 7: ioport 0x7c00 alloc failed ahc_isa_identify 8: ioport 0x8c00 alloc failed ahc_isa_identify 9: ioport 0x9c00 alloc failed ahc_isa_identify 10: ioport 0xac00 alloc failed ahc_isa_identify 11: ioport 0xbc00 alloc failed ahc_isa_identify 12: ioport 0xcc00 alloc failed ahc_isa_identify 13: ioport 0xdc00 alloc failed ahc_isa_identify 14: ioport 0xec00 alloc failed pcib0: allocated type 3 (0xa0000-0xa07ff) for rid 0 of orm0 pcib0: allocated type 3 (0xa0800-0xa0fff) for rid 0 of orm0 pcib0: allocated type 3 (0xa1000-0xa17ff) for rid 0 of orm0 pcib0: allocated type 3 (0xa1800-0xa1fff) for rid 0 of orm0 pcib0: allocated type 3 (0xa2000-0xa27ff) for rid 0 of orm0 pcib0: allocated type 3 (0xa2800-0xa2fff) for rid 0 of orm0 pcib0: allocated type 3 (0xa3000-0xa37ff) for rid 0 of orm0 pcib0: allocated type 3 (0xa3800-0xa3fff) for rid 0 of orm0 pcib0: allocated type 3 (0xa4000-0xa47ff) for rid 0 of orm0 pcib0: allocated type 3 (0xa4800-0xa4fff) for rid 0 of orm0 pcib0: allocated type 3 (0xa5000-0xa57ff) for rid 0 of orm0 pcib0: allocated type 3 (0xa5800-0xa5fff) for rid 0 of orm0 pcib0: allocated type 3 (0xa6000-0xa67ff) for rid 0 of orm0 pcib0: allocated type 3 (0xa6800-0xa6fff) for rid 0 of orm0 pcib0: allocated type 3 (0xa7000-0xa77ff) for rid 0 of orm0 pcib0: allocated type 3 (0xa7800-0xa7fff) for rid 0 of orm0 pcib0: allocated type 3 (0xa8000-0xa87ff) for rid 0 of orm0 pcib0: allocated type 3 (0xa8800-0xa8fff) for rid 0 of orm0 pcib0: allocated type 3 (0xa9000-0xa97ff) for rid 0 of orm0 pcib0: allocated type 3 (0xa9800-0xa9fff) for rid 0 of orm0 pcib0: allocated type 3 (0xaa000-0xaa7ff) for rid 0 of orm0 pcib0: allocated type 3 (0xaa800-0xaafff) for rid 0 of orm0 pcib0: allocated type 3 (0xab000-0xab7ff) for rid 0 of orm0 pcib0: allocated type 3 (0xab800-0xabfff) for rid 0 of orm0 pcib0: allocated type 3 (0xac000-0xac7ff) for rid 0 of orm0 pcib0: allocated type 3 (0xac800-0xacfff) for rid 0 of orm0 pcib0: allocated type 3 (0xad000-0xad7ff) for rid 0 of orm0 pcib0: allocated type 3 (0xad800-0xadfff) for rid 0 of orm0 pcib0: allocated type 3 (0xae000-0xae7ff) for rid 0 of orm0 pcib0: allocated type 3 (0xae800-0xaefff) for rid 0 of orm0 pcib0: allocated type 3 (0xaf000-0xaf7ff) for rid 0 of orm0 pcib0: allocated type 3 (0xaf800-0xaffff) for rid 0 of orm0 pcib0: allocated type 3 (0xb0000-0xb07ff) for rid 0 of orm0 pcib0: allocated type 3 (0xb0800-0xb0fff) for rid 0 of orm0 pcib0: allocated type 3 (0xb1000-0xb17ff) for rid 0 of orm0 pcib0: allocated type 3 (0xb1800-0xb1fff) for rid 0 of orm0 pcib0: allocated type 3 (0xb2000-0xb27ff) for rid 0 of orm0 pcib0: allocated type 3 (0xb2800-0xb2fff) for rid 0 of orm0 pcib0: allocated type 3 (0xb3000-0xb37ff) for rid 0 of orm0 pcib0: allocated type 3 (0xb3800-0xb3fff) for rid 0 of orm0 pcib0: allocated type 3 (0xb4000-0xb47ff) for rid 0 of orm0 pcib0: allocated type 3 (0xb4800-0xb4fff) for rid 0 of orm0 pcib0: allocated type 3 (0xb5000-0xb57ff) for rid 0 of orm0 pcib0: allocated type 3 (0xb5800-0xb5fff) for rid 0 of orm0 pcib0: allocated type 3 (0xb6000-0xb67ff) for rid 0 of orm0 pcib0: allocated type 3 (0xb6800-0xb6fff) for rid 0 of orm0 pcib0: allocated type 3 (0xb7000-0xb77ff) for rid 0 of orm0 pcib0: allocated type 3 (0xb7800-0xb7fff) for rid 0 of orm0 pcib0: allocated type 3 (0xb8000-0xb87ff) for rid 0 of orm0 pcib0: allocated type 3 (0xb8800-0xb8fff) for rid 0 of orm0 pcib0: allocated type 3 (0xb9000-0xb97ff) for rid 0 of orm0 pcib0: allocated type 3 (0xb9800-0xb9fff) for rid 0 of orm0 pcib0: allocated type 3 (0xba000-0xba7ff) for rid 0 of orm0 pcib0: allocated type 3 (0xba800-0xbafff) for rid 0 of orm0 pcib0: allocated type 3 (0xbb000-0xbb7ff) for rid 0 of orm0 pcib0: allocated type 3 (0xbb800-0xbbfff) for rid 0 of orm0 pcib0: allocated type 3 (0xbc000-0xbc7ff) for rid 0 of orm0 pcib0: allocated type 3 (0xbc800-0xbcfff) for rid 0 of orm0 pcib0: allocated type 3 (0xbd000-0xbd7ff) for rid 0 of orm0 pcib0: allocated type 3 (0xbd800-0xbdfff) for rid 0 of orm0 pcib0: allocated type 3 (0xbe000-0xbe7ff) for rid 0 of orm0 pcib0: allocated type 3 (0xbe800-0xbefff) for rid 0 of orm0 pcib0: allocated type 3 (0xbf000-0xbf7ff) for rid 0 of orm0 pcib0: allocated type 3 (0xbf800-0xbffff) for rid 0 of orm0 isa_probe_children: disabling PnP devices atkbdc: atkbdc0 already exists; skipping it attimer: attimer0 already exists; skipping it sc: sc0 already exists; skipping it isa_probe_children: probing non-PnP devices sc0 failed to probe on isa0 vga0 failed to probe on isa0 atrtc0: at port 0x70 irq 8 on isa0 atrtc0: Warning: Couldn't map I/O. atrtc0: registered as a time-of-day clock, resolution 1.000000s atrtc0: Can't map interrupt. pcib0: allocated type 4 (0x3f0-0x3f5) for rid 0 of fdc0 pcib0: allocated type 4 (0x3f7-0x3f7) for rid 1 of fdc0 fdc0 failed to probe at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 ppc0: cannot reserve I/O port range ppc0 failed to probe at irq 7 on isa0 pcib0: allocated type 4 (0x3f8-0x3f8) for rid 0 of uart0 uart0 failed to probe at port 0x3f8 irq 4 on isa0 pcib0: allocated type 4 (0x2f8-0x2f8) for rid 0 of uart1 uart1 failed to probe at port 0x2f8 irq 3 on isa0 isa_probe_children: probing PnP devices AcpiOsExecute: task queue not started AcpiOsExecute: task queue not started AcpiOsExecute: task queue not started AcpiOsExecute: task queue not started AcpiOsExecute: task queue not started AcpiOsExecute: task queue not started AcpiOsExecute: task queue not started AcpiOsExecute: task queue not started AcpiOsExecute: task queue not started AcpiOsExecute: task queue not started AcpiOsExecute: task queue not started AcpiOsExecute: task queue not started AcpiOsExecute: task queue not started AcpiOsExecute: task queue not started AcpiOsExecute: task queue not started AcpiOsExecute: task queue not started AcpiOsExecute: task queue not started AcpiOsExecute: task queue not started AcpiOsExecute: task queue not started AcpiOsExecute: task queue not started hwpstate_intel0: on cpu0 hwpstate_intel1: on cpu1 hwpstate_intel2: on cpu2 hwpstate_intel3: on cpu3 hwpstate_intel4: on cpu4 hwpstate_intel5: on cpu5 hwpstate_intel6: on cpu6 hwpstate_intel7: on cpu7 hwpstate_intel8: on cpu8 hwpstate_intel9: on cpu9 hwpstate_intel10: on cpu10 hwpstate_intel11: on cpu11 hwpstate_intel12: on cpu12 hwpstate_intel13: on cpu13 hwpstate_intel14: on cpu14 hwpstate_intel15: on cpu15 hwpstate_intel16: on cpu16 hwpstate_intel17: on cpu17 hwpstate_intel18: on cpu18 hwpstate_intel19: on cpu19 Device configuration finished. procfs registered Statistical TSC calibration took 78382 us and 5279 data points Timecounter "TSC-low" frequency 1459201185 Hz quality 1000 Statistical lapic calibration took 6011 us and 29441 data points lapic: Divisor 2, Frequency 19200015 Hz lapic: deadline tsc mode, Frequency 2918402370 Hz Timecounters tick every 1.000 msec ZFS filesystem version: 5 ZFS storage pool version: features support (5000) lo0: bpf attached vlan: initialized, using hash tables with chaining Linux i386 ELF exec handler installed Linux x86-64 ELF exec handler installed Linux i386 vDSO tsc_selector: 3 Linux i386 vDSO cpu_selector: 1 Linux x86-64 vDSO tsc_selector: 3 Linux x86-64 vDSO cpu_selector: 1 IPsec: Initialized Security Association Processing. tcp_init: net.inet.tcp.tcbhashsize auto tuned to 131072 AcpiOsExecute: enqueue 22 pending tasks acpi_acad0: acline initialization start battery0: battery initialization start ugen1.1: at usbus1 ugen0.1: at usbus0 acpi_acad0: On Line uhub0 on usbus1 battery0: rev = 0001 uhub0: on usbus1 acpi_acad0: acline initialization done, tried 1 times msi: Assigning MSI-X IRQ 129 to local APIC 1 vector 48 battery0: units = 0 battery0: dcap = 0 battery0: lfcap = 0 battery0: btech = 0 battery0: dvol = 0 battery0: wcap = 0 battery0: lcap = 0 battery0: cycles = 0 battery0: accuracy = 0 battery0: stmax = 0 battery0: stmin = 0 battery0: aimax = 0 battery0: aimin = 0 battery0: gra1 = 0 battery0: gra2 = 0 battery0: scap = 0 battery0: battery initialization done, tried 1 times msi: Assigning MSI-X IRQ 130 to local APIC 16 vector 50 msi: Assigning MSI-X IRQ 131 to local APIC 24 vector 49 msi: Assigning MSI-X IRQ 132 to local APIC 33 vector 48 msi: Assigning MSI-X IRQ 133 to local APIC 41 vector 48 msi: Assigning MSI-X IRQ 134 to local APIC 52 vector 49 msi: Assigning MSI-X IRQ 135 to local APIC 56 vector 50 msi: Assigning MSI-X IRQ 136 to local APIC 62 vector 48 uhub1 on usbus0 uhub1: on usbus0 hdacc0: at cad 0 on hdac0 hdaa0: at nid 1 on hdacc0 hdaa0: Subsystem ID: 0x103c8bf4 hdaa0: NumGPIO=3 NumGPO=0 NumGPI=0 GPIWake=0 GPIUnsol=1 hdaa0: GPIO0: disabled hdaa0: GPIO1: disabled hdaa0: GPIO2: disabled hdaa0: Original pins configuration: hdaa0: nid 0x as seq device conn jack loc color misc hdaa0: 18 411111f0 15 0 Speaker None 1/8 Rear Black 1 hdaa0: 19 40000000 0 0 Line-out None Unknown 0x00 Unknown 0 hdaa0: 20 90170110 1 0 Speaker Fixed Analog Internal Unknown 1 hdaa0: 23 411111f0 15 0 Speaker None 1/8 Rear Black 1 hdaa0: 24 411111f0 15 0 Speaker None 1/8 Rear Black 1 hdaa0: 25 03a110c0 12 0 Mic Jack 1/8 Left Black 0 hdaa0: 26 411111f0 15 0 Speaker None 1/8 Rear Black 1 hdaa0: 27 411111f0 15 0 Speaker None 1/8 Rear Black 1 hdaa0: 29 40600001 0 1 Modem-line None Unknown 0x00 Unknown 0 hdaa0: 30 411111f0 15 0 Speaker None 1/8 Rear Black 1 hdaa0: 33 03211020 2 0 Headphones Jack 1/8 Left Black 0 hdaa0: Patching widget caps nid=29 0x00400400 -> 0x00700400 hdaa0: Patching pin config nid=25 0x03a110c0 -> 0x03a1103e hdaa0: Patching pin config nid=33 0x03211020 -> 0x0321101f hdaa0: Patched pins configuration: hdaa0: nid 0x as seq device conn jack loc color misc hdaa0: 18 411111f0 15 0 Speaker None 1/8 Rear Black 1 DISA hdaa0: 19 40000000 0 0 Line-out None Unknown 0x00 Unknown 0 DISA hdaa0: 20 90170110 1 0 Speaker Fixed Analog Internal Unknown 1 hdaa0: 23 411111f0 15 0 Speaker None 1/8 Rear Black 1 DISA hdaa0: 24 411111f0 15 0 Speaker None 1/8 Rear Black 1 DISA hdaa0: 25 03a1103e 3 14 Mic Jack 1/8 Left Black 0 hdaa0: 26 411111f0 15 0 Speaker None 1/8 Rear Black 1 DISA hdaa0: 27 411111f0 15 0 Speaker None 1/8 Rear Black 1 DISA hdaa0: 30 411111f0 15 0 Speaker None 1/8 Rear Black 1 DISA hdaa0: 33 0321101f 1 15 Headphones Jack 1/8 Left Black 0 hdaa0: 2 associations found: hdaa0: Association 0 (1) out: hdaa0: Pin nid=20 seq=0 hdaa0: Pin nid=33 seq=15 hdaa0: Association 1 (3) in: hdaa0: Pin nid=25 seq=14 hdaa0: Tracing association 0 (1) hdaa0: Pin 20 traced to DAC 2 hdaa0: Pin 33 traced to DAC 2 and hpredir 0 hdaa0: Association 0 (1) trace succeeded hdaa0: Tracing association 1 (3) hdaa0: Unable to trace pin 25 to ADC 7, undo traces hdaa0: Pin 25 traced to ADC 8 hdaa0: Association 1 (3) trace succeeded hdaa0: Looking for additional DAC for association 0 (1) hdaa0: Looking for additional ADC for association 1 (3) hdaa0: Tracing input monitor hdaa0: Tracing nid 35 to out hdaa0: Tracing other input monitors hdaa0: Tracing nid 25 to out hdaa0: Tracing beeper hdaa0: Headphones redirection for association 0 nid=33 using unsolicited responses. hdaa0: Redirect output to: main hdaa0: FG config/quirks: forcestereo ivref50 ivref80 ivref100 ivref pcm0: at nid 20,33 and 25 on hdaa0 pcm0: Playback: pcm0: Stream cap: 0x00000001 PCM pcm0: PCM cap: 0x000e0040 16 20 24 bits, 48 KHz pcm0: DAC: 2 pcm0: pcm0: nid=20 [pin: Speaker (Fixed)] pcm0: + <- nid=2 [audio output] [src: pcm] pcm0: pcm0: nid=33 [pin: Headphones (Black Jack)] pcm0: + <- nid=2 [audio output] [src: pcm] pcm0: pcm0: Record: pcm0: Stream cap: 0x00000001 PCM pcm0: PCM cap: 0x000e0560 16 20 24 bits, 44 48 96 192 KHz pcm0: ADC: 8 pcm0: pcm0: nid=8 [audio input] pcm0: + <- nid=35 [audio mixer] [src: speaker, mic] pcm0: + <- nid=25 [pin: Mic (Black Jack)] [src: mic] pcm0: + <- nid=29 [beep widget] [src: speaker] pcm0: pcm0: Master Volume (OSS: vol): -65/0dB pcm0: +- ctl 1 (nid 2 out): -65/0dB (88 steps) pcm0: +- ctl 9 (nid 20 in ): mute pcm0: +- ctl 16 (nid 33 in ): mute pcm0: pcm0: PCM Volume (OSS: pcm): -65/0dB pcm0: +- ctl 1 (nid 2 out): -65/0dB (88 steps) pcm0: +- ctl 9 (nid 20 in ): mute pcm0: +- ctl 16 (nid 33 in ): mute pcm0: pcm0: Microphone Volume (OSS: mic): 0/30dB pcm0: +- ctl 12 (nid 25 out): 0/30dB (4 steps) pcm0: +- ctl 22 (nid 35 in 0): mute pcm0: pcm0: Speaker/Beep Volume (OSS: speaker): 0/0dB pcm0: +- ctl 25 (nid 35 in 3): mute pcm0: pcm0: Recording Level (OSS: rec): -17/30dB pcm0: +- ctl 4 (nid 8 in 0): -17/30dB (64 steps) + mute pcm0: +- ctl 12 (nid 25 out): 0/30dB (4 steps) pcm0: +- ctl 22 (nid 35 in 0): mute pcm0: +- ctl 25 (nid 35 in 3): mute pcm0: pcm0: Mixer "vol": pcm0: Mixer "pcm": pcm0: Mixer "speaker": pcm0: Mixer "mic": pcm0: Mixer "rec": pcm0: Mixer "ogain": pcm0: Playback channel set is: Front Left, Front Right, pcm0: Playback channel matrix is: 2.0 (unknown) pcm0: Recording channel set is: Front Left, Front Right, pcm0: Recording channel matrix is: 2.0 (disconnected) nda0 at nvme0 bus 0 scbus0 target 0 lun 1 nda0: nda0: Serial Number BTKA252105EF1P0B nda0: nvme version 1.4 nda0: 976762MB (2000409264 512 byte sectors) GEOM: new disk nda0 pass0 at nvme0 bus 0 scbus0 target 0 lun 1 pass0: pass0: Serial Number BTKA252105EF1P0B pass0: nvme version 1.4 pci0: driver added found-> vendor=0x8086, dev=0xa71d, revid=0x00 domain=0, bus=0, slot=4, func=0 class=11-80-00, hdrtype=0x00, mfdev=0 cmdreg=0x0002, statreg=0x0090, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=255 powerspec 3 supports D0 D3 current D3 MSI supports 1 message pci0:0:4:0: reprobing on driver added pci0: set ACPI power state D0 on \134_SB_.PC00.TCPU pci0:0:4:0: Transition from D3 to D0 pci0:0:4:0: Transition from D0 to D3 found-> vendor=0x8086, dev=0xa74f, revid=0x00 domain=0, bus=0, slot=8, func=0 class=08-80-00, hdrtype=0x00, mfdev=0 cmdreg=0x0002, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=255 powerspec 2 supports D0 D3 current D3 MSI supports 1 message pci0:0:8:0: reprobing on driver added pci0: set ACPI power state D0 on \134_SB_.PC00.GNA0 pci0:0:8:0: Transition from D3 to D0 pci0:0:8:0: Transition from D0 to D3 found-> vendor=0x8086, dev=0xa77d, revid=0x01 domain=0, bus=0, slot=10, func=0 class=11-80-00, hdrtype=0x00, mfdev=0 cmdreg=0x0002, statreg=0x0010, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) powerspec 3 supports D0 D3 current D3 pci0:0:10:0: reprobing on driver added pci0:0:10:0: Transition from D3 to D0 pci0:0:10:0: Transition from D0 to D3 found-> vendor=0x8086, dev=0x51ef, revid=0x01 domain=0, bus=0, slot=20, func=2 class=05-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0002, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) powerspec 3 supports D0 D3 current D3 pci0:0:20:2: reprobing on driver added pci0:0:20:2: Transition from D3 to D0 pci0:0:20:2: Transition from D0 to D3 found-> vendor=0x8086, dev=0x51f1, revid=0x01 domain=0, bus=0, slot=20, func=3 class=02-80-00, hdrtype=0x00, mfdev=1 cmdreg=0x0002, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=255 powerspec 3 supports D0 D3 current D3 MSI supports 1 message, 64 bit MSI-X supports 16 messages in map 0x10 pci0:0:20:3: reprobing on driver added pci0: set ACPI power state D0 on \134_SB_.PC00.CNVW pci0:0:20:3: Transition from D3 to D0 pci0:0:20:3: Transition from D0 to D3 pci0: set ACPI power state D3 on \134_SB_.PC00.CNVW found-> vendor=0x8086, dev=0x51e8, revid=0x01 domain=0, bus=0, slot=21, func=0 class=0c-80-00, hdrtype=0x00, mfdev=1 cmdreg=0x0000, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=255 powerspec 3 supports D0 D3 current D3 pci0:0:21:0: reprobing on driver added pci0: set ACPI power state D0 on \134_SB_.PC00.I2C0 pci0:0:21:0: Transition from D3 to D0 pci0:0:21:0: Transition from D0 to D3 pci0: set ACPI power state D3 on \134_SB_.PC00.I2C0 found-> vendor=0x8086, dev=0x51e0, revid=0x01 domain=0, bus=0, slot=22, func=0 class=07-80-00, hdrtype=0x00, mfdev=1 cmdreg=0x0002, statreg=0x0010, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=255 powerspec 3 supports D0 D3 current D3 MSI supports 1 message, 64 bit pci0:0:22:0: reprobing on driver added pci0: set ACPI power state D0 on \134_SB_.PC00.HECI pci0:0:22:0: Transition from D3 to D0 pci0:0:22:0: Transition from D0 to D3 found-> vendor=0x8086, dev=0x51a3, revid=0x01 domain=0, bus=0, slot=31, func=4 class=0c-05-00, hdrtype=0x00, mfdev=0 cmdreg=0x0003, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=255 pci0:0:31:4: reprobing on driver added found-> vendor=0x8086, dev=0x51a4, revid=0x01 domain=0, bus=0, slot=31, func=5 class=0c-80-00, hdrtype=0x00, mfdev=0 cmdreg=0x0402, statreg=0x0000, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) pci0:0:31:5: reprobing on driver added pci1: driver added pci2: driver added found-> vendor=0x10ec, dev=0x522a, revid=0x01 domain=0, bus=2, slot=0, func=0 class=ff-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0002, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=255 powerspec 3 supports D0 D1 D2 D3 current D3 MSI supports 1 message, 64 bit pci0:2:0:0: reprobing on driver added pci2: set ACPI power state D0 on \134_SB_.PC00.RP04.PXSX pci0:2:0:0: Transition from D3 to D0 pci0:2:0:0: Transition from D0 to D3 Trying to mount root from zfs:mavhp/ROOT/default []... uhub1: 5 ports with 5 removable, self powered uhub0: 16 ports with 16 removable, self powered ugen1.2: at usbus1 Root mount waiting for: usbus1 ugen1.3: at usbus1 ukbd0 on uhub0 ukbd0: on usbus1 kbd2 at ukbd0 kbd2: ukbd0, generic (0), config:0x0, flags:0x3d0000 ugen1.4: at usbus1 Root mount waiting for: usbus1 ugen1.5: at usbus1 ugen1.6: at usbus1 efirtc0: providing initial system time start_init: trying /sbin/init lindebugfs registered drmn0: on vgapci0 vgapci0: child drmn0 requested pci_enable_io vgapci0: child drmn0 requested pci_enable_io drmn0: [drm] Incompatible option enable_guc=-1 - undocumented flag [drm] Unable to create a private tmpfs mount, hugepage support will be disabled(-19). [drm] Got stolen memory base 0x0, size 0x0 vgapci0: attempting to allocate 1 MSI vectors (1 supported) msi: routing MSI IRQ 147 to local APIC 24 vector 48 vgapci0: using IRQ 147 for MSI adlp_dmc_ver2_10.bin: could not load firmware image, error 2 i915/adlp_dmc_ver2_10.bin: could not load firmware image, error 2 i915_adlp_dmc_ver2_10.bin: could not load firmware image, error 2 drmn0: Adding i2c adapter i915 gmbus dpa lkpi_iic0: on drmn0 iicbus0: on lkpi_iic0 iic0: on iicbus0 drmn0: Adding i2c adapter i915 gmbus dpb lkpi_iic1: on drmn0 iicbus1: on lkpi_iic1 iic1: on iicbus1 drmn0: Adding i2c adapter i915 gmbus dpc lkpi_iic2: on drmn0 iicbus2: on lkpi_iic2 iic2: on iicbus2 drmn0: Adding i2c adapter i915 gmbus tc1 lkpi_iic3: on drmn0 iicbus3: on lkpi_iic3 KLD i915_adlp_dmc_ver2_10_bin.ko: depends on kernel - not available or version mismatch i915_adlp_dmc_ver2_10_bin: could not load firmware image, error 17 iic3: on iicbus3 drmn0: Adding i2c adapter i915 gmbus tc2 lkpi_iic4: on drmn0 iicbus4: on lkpi_iic4 iic4: on iicbus4 drmn0: Adding i2c adapter i915 gmbus tc3 lkpi_iic5: on drmn0 iicbus5: on lkpi_iic5 KLD i915_adlp_dmc_ver2_10_bin.ko: depends on kernel - not available or version mismatch i915_adlp_dmc_ver2_10_bin: could not load firmware image, error 17 drmn0: could not load firmware image 'i915/adlp_dmc_ver2_10.bin' drmn0: [drm] Failed to load DMC firmware i915/adlp_dmc_ver2_10.bin. Disabling runtime power management. iic5: drmn0: [drm] Run pkg install gpu-firmware-kmod to install it on iicbus5 drmn0: Adding i2c adapter i915 gmbus tc4 lkpi_iic6: on drmn0 iicbus6: on lkpi_iic6 iic6: on iicbus6 drmn0: Adding i2c adapter i915 gmbus tc5 lkpi_iic7: on drmn0 iicbus7: on lkpi_iic7 iic7: on iicbus7 drmn0: Adding i2c adapter i915 gmbus tc6 lkpi_iic8: on drmn0 iicbus8: on lkpi_iic8 iic8: on iicbus8 [drm] Connector eDP-1: get mode from tunables: [drm] - kern.vt.fb.modes.eDP-1 [drm] - kern.vt.fb.default_mode [drm] Connector HDMI-A-1: get mode from tunables: [drm] - kern.vt.fb.modes.HDMI-A-1 [drm] - kern.vt.fb.default_mode [drm] Connector DP-1: get mode from tunables: [drm] - kern.vt.fb.modes.DP-1 [drm] - kern.vt.fb.default_mode [drm] Connector DP-2: get mode from tunables: [drm] - kern.vt.fb.modes.DP-2 [drm] - kern.vt.fb.default_mode adlp_guc_62.0.3.bin: could not load firmware image, error 2 i915/adlp_guc_62.0.3.bin: could not load firmware image, error 2 i915_adlp_guc_62.0.3.bin: could not load firmware image, error 2 KLD i915_adlp_guc_62_0_3_bin.ko: depends on kernel - not available or version mismatch i915_adlp_guc_62_0_3_bin: could not load firmware image, error 17 KLD i915_adlp_guc_62_0_3_bin.ko: depends on kernel - not available or version mismatch i915_adlp_guc_62_0_3_bin: could not load firmware image, error 17 drmn0: could not load firmware image 'i915/adlp_guc_62.0.3.bin' drmn0: [drm] GuC firmware i915/adlp_guc_62.0.3.bin: fetch failed with error -2 drmn0: [drm] GuC firmware(s) can be downloaded from https://git.kernel.org/pub/scm/linux/kernel/git/firmware/linux-firmware.git/tree/i915 drmn0: 0xfffffe015ec59638Vdrmn0: Please file a bug on drm/i915; see https://gitlab.freedesktop.org/drm/intel/-/wikis/How-to-file-i915-bugs for details.drmn0: 0xfffffe015ec59698Vdrmn0: 0xfffffe015ec596d8Vdrmn0: [drm:0xffffffff842e51a0s] 0xfffffe015ec59738Vsysctl_warn_reuse: can't re-use a leaf (hw.dri.debug)! drm1: Adding i2c adapter AUX A/DDI A/PHY A lkpi_iic9: on drm1 iicbus9: on lkpi_iic9 iic9: on iicbus9 drm3: Adding i2c adapter AUX USBC3/DDI TC3/PHY TC3 lkpi_iic10: on drm3 iicbus10: on lkpi_iic10 iic10: on iicbus10 drm4: Adding i2c adapter AUX USBC4/DDI TC4/PHY TC4 lkpi_iic11: on drm4 iicbus11: on lkpi_iic11 iic11: on iicbus11 [drm] Initialized i915 1.6.0 20201103 for drmn0 on minor 0 VT: Replacing driver "efifb" with new "fb". start FB_INFO: type=11 height=1800 width=2880 depth=32 pbase=0x4000040000 vbase=0xfffffe0163640000 name=drmn0 flags=0x0 stride=11520 bpp=32 end FB_INFO hdaa0: GPIO commit hdaa0: GPIO0: output state=1 hdaa0: GPIO1: output state=1 hdaa0: GPIO2: output state=1 pci0: driver added found-> vendor=0x8086, dev=0xa71d, revid=0x00 domain=0, bus=0, slot=4, func=0 class=11-80-00, hdrtype=0x00, mfdev=0 cmdreg=0x0002, statreg=0x0090, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=255 powerspec 3 supports D0 D3 current D3 MSI supports 1 message pci0:0:4:0: reprobing on driver added pci0: set ACPI power state D0 on \134_SB_.PC00.TCPU pci0:0:4:0: Transition from D3 to D0 pci0:0:4:0: Transition from D0 to D3 found-> vendor=0x8086, dev=0xa74f, revid=0x00 domain=0, bus=0, slot=8, func=0 class=08-80-00, hdrtype=0x00, mfdev=0 cmdreg=0x0002, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=255 powerspec 2 supports D0 D3 current D3 MSI supports 1 message pci0:0:8:0: reprobing on driver added pci0: set ACPI power state D0 on \134_SB_.PC00.GNA0 pci0:0:8:0: Transition from D3 to D0 pci0:0:8:0: Transition from D0 to D3 found-> vendor=0x8086, dev=0xa77d, revid=0x01 domain=0, bus=0, slot=10, func=0 class=11-80-00, hdrtype=0x00, mfdev=0 cmdreg=0x0002, statreg=0x0010, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) powerspec 3 supports D0 D3 current D3 pci0:0:10:0: reprobing on driver added pci0:0:10:0: Transition from D3 to D0 pci0:0:10:0: Transition from D0 to D3 found-> vendor=0x8086, dev=0x51ef, revid=0x01 domain=0, bus=0, slot=20, func=2 class=05-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0002, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) powerspec 3 supports D0 D3 current D3 pci0:0:20:2: reprobing on driver added pci0:0:20:2: Transition from D3 to D0 pci0:0:20:2: Transition from D0 to D3 found-> vendor=0x8086, dev=0x51f1, revid=0x01 domain=0, bus=0, slot=20, func=3 class=02-80-00, hdrtype=0x00, mfdev=1 cmdreg=0x0002, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=255 powerspec 3 supports D0 D3 current D3 MSI supports 1 message, 64 bit MSI-X supports 16 messages in map 0x10 pci0:0:20:3: reprobing on driver added pci0: set ACPI power state D0 on \134_SB_.PC00.CNVW pci0:0:20:3: Transition from D3 to D0 pci0:0:20:3: Transition from D0 to D3 pci0: set ACPI power state D3 on \134_SB_.PC00.CNVW found-> vendor=0x8086, dev=0x51e8, revid=0x01 domain=0, bus=0, slot=21, func=0 class=0c-80-00, hdrtype=0x00, mfdev=1 cmdreg=0x0000, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=255 powerspec 3 supports D0 D3 current D3 pci0:0:21:0: reprobing on driver added pci0: set ACPI power state D0 on \134_SB_.PC00.I2C0 pci0:0:21:0: Transition from D3 to D0 pci0:0:21:0: Transition from D0 to D3 pci0: set ACPI power state D3 on \134_SB_.PC00.I2C0 found-> vendor=0x8086, dev=0x51e0, revid=0x01 domain=0, bus=0, slot=22, func=0 class=07-80-00, hdrtype=0x00, mfdev=1 cmdreg=0x0002, statreg=0x0010, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=255 powerspec 3 supports D0 D3 current D3 MSI supports 1 message, 64 bit pci0:0:22:0: reprobing on driver added pci0: set ACPI power state D0 on \134_SB_.PC00.HECI pci0:0:22:0: Transition from D3 to D0 pci0:0:22:0: Transition from D0 to D3 found-> vendor=0x8086, dev=0x51a3, revid=0x01 domain=0, bus=0, slot=31, func=4 class=0c-05-00, hdrtype=0x00, mfdev=0 cmdreg=0x0003, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=255 pci0:0:31:4: reprobing on driver added found-> vendor=0x8086, dev=0x51a4, revid=0x01 domain=0, bus=0, slot=31, func=5 class=0c-80-00, hdrtype=0x00, mfdev=0 cmdreg=0x0402, statreg=0x0000, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) pci0:0:31:5: reprobing on driver added pci1: driver added pci2: driver added found-> vendor=0x10ec, dev=0x522a, revid=0x01 domain=0, bus=2, slot=0, func=0 class=ff-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0002, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=255 powerspec 3 supports D0 D1 D2 D3 current D3 MSI supports 1 message, 64 bit pci0:2:0:0: reprobing on driver added pci2: set ACPI power state D0 on \134_SB_.PC00.RP04.PXSX pci0:2:0:0: Transition from D3 to D0 pci0:2:0:0: Transition from D0 to D3 Intel(R) Wireless WiFi based driver for FreeBSD pci0: driver added found-> vendor=0x8086, dev=0xa71d, revid=0x00 domain=0, bus=0, slot=4, func=0 class=11-80-00, hdrtype=0x00, mfdev=0 cmdreg=0x0002, statreg=0x0090, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=255 powerspec 3 supports D0 D3 current D3 MSI supports 1 message pci0:0:4:0: reprobing on driver added pci0: set ACPI power state D0 on \134_SB_.PC00.TCPU pci0:0:4:0: Transition from D3 to D0 pci0:0:4:0: Transition from D0 to D3 found-> vendor=0x8086, dev=0xa74f, revid=0x00 domain=0, bus=0, slot=8, func=0 class=08-80-00, hdrtype=0x00, mfdev=0 cmdreg=0x0002, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=255 powerspec 2 supports D0 D3 current D3 MSI supports 1 message pci0:0:8:0: reprobing on driver added pci0: set ACPI power state D0 on \134_SB_.PC00.GNA0 pci0:0:8:0: Transition from D3 to D0 pci0:0:8:0: Transition from D0 to D3 found-> vendor=0x8086, dev=0xa77d, revid=0x01 domain=0, bus=0, slot=10, func=0 class=11-80-00, hdrtype=0x00, mfdev=0 cmdreg=0x0002, statreg=0x0010, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) powerspec 3 supports D0 D3 current D3 pci0:0:10:0: reprobing on driver added pci0:0:10:0: Transition from D3 to D0 pci0:0:10:0: Transition from D0 to D3 found-> vendor=0x8086, dev=0x51ef, revid=0x01 domain=0, bus=0, slot=20, func=2 class=05-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0002, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) powerspec 3 supports D0 D3 current D3 pci0:0:20:2: reprobing on driver added pci0:0:20:2: Transition from D3 to D0 pci0:0:20:2: Transition from D0 to D3 found-> vendor=0x8086, dev=0x51f1, revid=0x01 domain=0, bus=0, slot=20, func=3 class=02-80-00, hdrtype=0x00, mfdev=1 cmdreg=0x0002, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=255 powerspec 3 supports D0 D3 current D3 MSI supports 1 message, 64 bit MSI-X supports 16 messages in map 0x10 pci0:0:20:3: reprobing on driver added pci0: set ACPI power state D0 on \134_SB_.PC00.CNVW pci0:0:20:3: Transition from D3 to D0 iwlwifi0: mem 0x6001144000-0x6001147fff at device 20.3 on pci0 iwlwifi0: attempting to allocate 16 MSI-X vectors (16 supported) msi: routing MSI-X IRQ 148 to local APIC 32 vector 48 msi: routing MSI-X IRQ 149 to local APIC 40 vector 48 msi: routing MSI-X IRQ 150 to local APIC 48 vector 49 msi: routing MSI-X IRQ 151 to local APIC 50 vector 49 msi: routing MSI-X IRQ 152 to local APIC 52 vector 50 msi: routing MSI-X IRQ 153 to local APIC 54 vector 49 msi: routing MSI-X IRQ 154 to local APIC 56 vector 51 msi: routing MSI-X IRQ 155 to local APIC 58 vector 50 msi: routing MSI-X IRQ 156 to local APIC 60 vector 48 msi: routing MSI-X IRQ 157 to local APIC 62 vector 50 msi: routing MSI-X IRQ 158 to local APIC 0 vector 58 msi: routing MSI-X IRQ 159 to local APIC 8 vector 48 msi: routing MSI-X IRQ 160 to local APIC 16 vector 48 msi: routing MSI-X IRQ 161 to local APIC 24 vector 50 msi: routing MSI-X IRQ 162 to local APIC 32 vector 49 msi: routing MSI-X IRQ 163 to local APIC 40 vector 49 iwlwifi0: using IRQs 148-163 for MSI-X msi: Assigning MSI-X IRQ 149 to local APIC 0 vector 60 msi: Assigning MSI-X IRQ 150 to local APIC 1 vector 49 msi: Assigning MSI-X IRQ 151 to local APIC 8 vector 50 msi: Assigning MSI-X IRQ 152 to local APIC 9 vector 48 msi: Assigning MSI-X IRQ 153 to local APIC 16 vector 51 msi: Assigning MSI-X IRQ 154 to local APIC 17 vector 48 msi: Assigning MSI-X IRQ 155 to local APIC 24 vector 51 msi: Assigning MSI-X IRQ 156 to local APIC 25 vector 48 msi: Assigning MSI-X IRQ 157 to local APIC 32 vector 50 msi: Assigning MSI-X IRQ 158 to local APIC 33 vector 49 msi: Assigning MSI-X IRQ 159 to local APIC 40 vector 48 msi: Assigning MSI-X IRQ 160 to local APIC 41 vector 49 msi: Assigning MSI-X IRQ 161 to local APIC 48 vector 49 msi: Assigning MSI-X IRQ 162 to local APIC 50 vector 49 iwlwifi0: Detected crf-id 0x400410, cnv-id 0x80400 wfpm id 0x80000020 iwlwifi0: PCI dev 51f1/0094, rev=0x370, rfid=0x2010d000 firmware: 'iwlwifi-so-a0-gf-a0-83.ucode' version 83: 1739988 bytes loaded at 0xffffffff844bc000 iwlwifi0: successfully loaded firmware image 'iwlwifi-so-a0-gf-a0-83.ucode' iwlwifi0: api flags index 2 larger than supported by driver iwlwifi0: TLV_FW_FSEQ_VERSION: FSEQ Version: 0.0.2.41 iwl-debug-yoyo.bin: could not load firmware image, error 2 iwl-debug-yoyo.bin: could not load firmware image, error 2 iwl-debug-yoyo_bin: could not load firmware image, error 2 iwl_debug_yoyo_bin: could not load firmware image, error 2 iwlwifi0: loaded firmware version 83.e8f84e98.0 so-a0-gf-a0-83.ucode op_mode iwlmvm found-> vendor=0x8086, dev=0x51e8, revid=0x01 domain=0, bus=0, slot=21, func=0 class=0c-80-00, hdrtype=0x00, mfdev=1 cmdreg=0x0000, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=255 powerspec 3 supports D0 D3 current D3 pci0:0:21:0: reprobing on driver added pci0: set ACPI power state D0 on \134_SB_.PC00.I2C0 pci0:0:21:0: Transition from D3 to D0 pci0:0:21:0: Transition from D0 to D3 pci0: set ACPI power state D3 on \134_SB_.PC00.I2C0 found-> vendor=0x8086, dev=0x51e0, revid=0x01 domain=0, bus=0, slot=22, func=0 class=07-80-00, hdrtype=0x00, mfdev=1 cmdreg=0x0002, statreg=0x0010, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=255 powerspec 3 supports D0 D3 current D3 MSI supports 1 message, 64 bit pci0:0:22:0: reprobing on driver added pci0: set ACPI power state D0 on \134_SB_.PC00.HECI pci0:0:22:0: Transition from D3 to D0 pci0:0:22:0: Transition from D0 to D3 found-> vendor=0x8086, dev=0x51a3, revid=0x01 domain=0, bus=0, slot=31, func=4 class=0c-05-00, hdrtype=0x00, mfdev=0 cmdreg=0x0003, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=255 pci0:0:31:4: reprobing on driver added found-> vendor=0x8086, dev=0x51a4, revid=0x01 domain=0, bus=0, slot=31, func=5 class=0c-80-00, hdrtype=0x00, mfdev=0 cmdreg=0x0402, statreg=0x0000, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) pci0:0:31:5: reprobing on driver added pci1: driver added pci2: driver added found-> vendor=0x10ec, dev=0x522a, revid=0x01 domain=0, bus=2, slot=0, func=0 class=ff-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0002, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=255 powerspec 3 supports D0 D1 D2 D3 current D3 MSI supports 1 message, 64 bit pci0:2:0:0: reprobing on driver added pci2: set ACPI power state D0 on \134_SB_.PC00.RP04.PXSX pci0:2:0:0: Transition from D3 to D0 pci0:2:0:0: Transition from D0 to D3 iwlwifi0: Detected Intel(R) Wi-Fi 6E AX211 160MHz, REV=0x370 iwlwifi0: WRT: Invalid buffer destination iwlwifi0: WFPM_UMAC_PD_NOTIFICATION: 0x20 iwlwifi0: WFPM_LMAC2_PD_NOTIFICATION: 0x1f iwlwifi0: WFPM_AUTH_KEY_0: 0x90 iwlwifi0: CNVI_SCU_SEQ_DATA_DW9: 0x0 iwlwifi0: RFIm is deactivated, reason = 4 firmware: 'iwlwifi-so-a0-gf-a0.pnvm' version 83: 55580 bytes loaded at 0xffffffff844bc000 iwlwifi0: successfully loaded firmware image 'iwlwifi-so-a0-gf-a0.pnvm' iwlwifi0: loaded PNVM version 181407b3 iwlwifi0: Detected RF GF, rfid=0x2010d000 iwlwifi0: base HW address: f4:6d:3f:e3:70:83 iwlwifi0: 11a rates: 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps iwlwifi0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps iwlwifi0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps linprocfs registered linsysfs registered pci0: driver added found-> vendor=0x8086, dev=0xa71d, revid=0x00 domain=0, bus=0, slot=4, func=0 class=11-80-00, hdrtype=0x00, mfdev=0 cmdreg=0x0002, statreg=0x0090, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=255 powerspec 3 supports D0 D3 current D3 MSI supports 1 message pci0:0:4:0: reprobing on driver added pci0: set ACPI power state D0 on \134_SB_.PC00.TCPU pci0:0:4:0: Transition from D3 to D0 pci0:0:4:0: Transition from D0 to D3 found-> vendor=0x8086, dev=0xa74f, revid=0x00 domain=0, bus=0, slot=8, func=0 class=08-80-00, hdrtype=0x00, mfdev=0 cmdreg=0x0002, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=255 powerspec 2 supports D0 D3 current D3 MSI supports 1 message pci0:0:8:0: reprobing on driver added pci0: set ACPI power state D0 on \134_SB_.PC00.GNA0 pci0:0:8:0: Transition from D3 to D0 pci0:0:8:0: Transition from D0 to D3 found-> vendor=0x8086, dev=0xa77d, revid=0x01 domain=0, bus=0, slot=10, func=0 class=11-80-00, hdrtype=0x00, mfdev=0 cmdreg=0x0002, statreg=0x0010, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) powerspec 3 supports D0 D3 current D3 pci0:0:10:0: reprobing on driver added pci0:0:10:0: Transition from D3 to D0 pci0:0:10:0: Transition from D0 to D3 found-> vendor=0x8086, dev=0x51ef, revid=0x01 domain=0, bus=0, slot=20, func=2 class=05-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0002, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) powerspec 3 supports D0 D3 current D3 pci0:0:20:2: reprobing on driver added pci0:0:20:2: Transition from D3 to D0 pci0:0:20:2: Transition from D0 to D3 found-> vendor=0x8086, dev=0x51e8, revid=0x01 domain=0, bus=0, slot=21, func=0 class=0c-80-00, hdrtype=0x00, mfdev=1 cmdreg=0x0000, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=255 powerspec 3 supports D0 D3 current D3 pci0:0:21:0: reprobing on driver added pci0: set ACPI power state D0 on \134_SB_.PC00.I2C0 pci0:0:21:0: Transition from D3 to D0 ig4iic0: at device 21.0 on pci0 pcib0: allocated type 3 (0x80000000-0x80000fff) for rid 10 of ig4iic0 ig4iic0: Lazy allocation of 0x1000 bytes rid 0x10 type 3 at 0x80000000 ig4iic0: Using MSI pcib0: matched entry for 0.21.INTA pcib0: slot 21 INTA hardwired to IRQ 27 ig4iic0: Controller parameters: Speed: Fast Regs: HCNT :LCNT :SDAHLD Std: 0x0228:0x028c:0x0006 Fast: 0x0064:0x00c8:0x0006 FIFO: RX:0x0001: TX:0x0001 ioapic0: routing intpin 27 (PCI IRQ 27) to lapic 48 vector 50 iicbus12: on ig4iic0 iicbus12: found ACPI child SlaveAddress: 0x002c ConnectionSpeed: 400000Hz SlaveMode: ControllerInitiated AddressingMode: 7Bit ConnectionSharing: Exclusive GPIO IRQ pin: 332 unknown: set ACPI power state D0 on \134_SB_.PC00.I2C0.TPD0 iicbus12: at addr 0x2c iic12: on iicbus12 found-> vendor=0x8086, dev=0x51e0, revid=0x01 domain=0, bus=0, slot=22, func=0 class=07-80-00, hdrtype=0x00, mfdev=1 cmdreg=0x0002, statreg=0x0010, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=255 powerspec 3 supports D0 D3 current D3 MSI supports 1 message, 64 bit pci0:0:22:0: reprobing on driver added pci0: set ACPI power state D0 on \134_SB_.PC00.HECI pci0:0:22:0: Transition from D3 to D0 pci0:0:22:0: Transition from D0 to D3 found-> vendor=0x8086, dev=0x51a3, revid=0x01 domain=0, bus=0, slot=31, func=4 class=0c-05-00, hdrtype=0x00, mfdev=0 cmdreg=0x0003, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=255 pci0:0:31:4: reprobing on driver added ichsmb0: port 0xefa0-0xefbf mem 0x600114c000-0x600114c0ff at device 31.4 on pci0 pcib0: matched entry for 0.31.INTA pcib0: slot 31 INTA hardwired to IRQ 16 ioapic0: routing intpin 16 (PCI IRQ 16) to lapic 50 vector 50 smbus0: on ichsmb0 found-> vendor=0x8086, dev=0x51a4, revid=0x01 domain=0, bus=0, slot=31, func=5 class=0c-80-00, hdrtype=0x00, mfdev=0 cmdreg=0x0402, statreg=0x0000, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) pci0:0:31:5: reprobing on driver added pci1: driver added pci2: driver added found-> vendor=0x10ec, dev=0x522a, revid=0x01 domain=0, bus=2, slot=0, func=0 class=ff-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0002, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=255 powerspec 3 supports D0 D1 D2 D3 current D3 MSI supports 1 message, 64 bit pci0:2:0:0: reprobing on driver added pci2: set ACPI power state D0 on \134_SB_.PC00.RP04.PXSX pci0:2:0:0: Transition from D3 to D0 rtsx0: <2.1g Realtek RTS522A PCIe SD Card Reader> mem 0x50400000-0x50400fff at device 0.0 on pci2 rtsx0: Attach - Vendor ID: 0x10ec - Device ID: 0x522a rtsx0: We are running with inversion: 0 rtsx0: attempting to allocate 1 MSI vectors (1 supported) msi: routing MSI IRQ 164 to local APIC 52 vector 50 rtsx0: using IRQ 164 for MSI rtsx0: rtsx_irq_res_id: 1, rtsx_mem_res_id: 16 rtsx0: card_drive_sel: 0x41, sd30_drive_sel_3v3: 0x03, reverse_socket is false rtsx0: rtsx_init() rtsx_flags: 0x0002 rtsx0: A card is detected mmc0: on rtsx0 mmc0: Probing bus mmc0: SD 2.0 interface conditions: OK mmc0: SD probe: OK (OCR: 0x00ff8000) mmc0: Current OCR: 0x00ff8000 mmc0: Probing cards mmc0: New card detected (CID 0353445346313238808afc34e3015801) mmc0: New card detected (CSD 400e0032db790003b8ab7f800a404001) mmc0: Card at relative address 0xaaaa added: mmc0: card: SDHC SF128 8.0 SN 8AFC34E3 MFG 08/2021 by 3 SD mmc0: quirks: 0 mmc0: bus: 4bit, 50MHz (high speed timing) mmc0: memory: 249737216 blocks, erase sector 8192 blocks mmc0: setting transfer rate to 50.000MHz (high speed timing) mmcsd0: 128GB at mmc0 50.0MHz/4bit/2048-block rtsx0: Device attached pci0: driver added GEOM: new disk mmcsd0 found-> vendor=0x8086, dev=0xa71d, revid=0x00 domain=0, bus=0, slot=4, func=0 class=11-80-00, hdrtype=0x00, mfdev=0 cmdreg=0x0002, statreg=0x0090, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=255 powerspec 3 supports D0 D3 current D3 MSI supports 1 message pci0:0:4:0: reprobing on driver added pci0: set ACPI power state D0 on \134_SB_.PC00.TCPU pci0:0:4:0: Transition from D3 to D0 mmc0: setting bus width to 4 bits high speed timing pci0:0:4:0: Transition from D0 to D3 found-> vendor=0x8086, dev=0xa74f, revid=0x00 domain=0, bus=0, slot=8, func=0 class=08-80-00, hdrtype=0x00, mfdev=0 cmdreg=0x0002, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=255 powerspec 2 supports D0 D3 current D3 MSI supports 1 message pci0:0:8:0: reprobing on driver added pci0: set ACPI power state D0 on \134_SB_.PC00.GNA0 pci0:0:8:0: Transition from D3 to D0 pci0:0:8:0: Transition from D0 to D3 found-> vendor=0x8086, dev=0xa77d, revid=0x01 domain=0, bus=0, slot=10, func=0 class=11-80-00, hdrtype=0x00, mfdev=0 cmdreg=0x0002, statreg=0x0010, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) powerspec 3 supports D0 D3 current D3 pci0:0:10:0: reprobing on driver added pci0:0:10:0: Transition from D3 to D0 pci0:0:10:0: Transition from D0 to D3 found-> vendor=0x8086, dev=0x51ef, revid=0x01 domain=0, bus=0, slot=20, func=2 class=05-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0002, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) powerspec 3 supports D0 D3 current D3 pci0:0:20:2: reprobing on driver added pci0:0:20:2: Transition from D3 to D0 pci0:0:20:2: Transition from D0 to D3 found-> vendor=0x8086, dev=0x51e0, revid=0x01 domain=0, bus=0, slot=22, func=0 class=07-80-00, hdrtype=0x00, mfdev=1 cmdreg=0x0002, statreg=0x0010, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=255 powerspec 3 supports D0 D3 current D3 MSI supports 1 message, 64 bit pci0:0:22:0: reprobing on driver added pci0: set ACPI power state D0 on \134_SB_.PC00.HECI pci0:0:22:0: Transition from D3 to D0 pci0:0:22:0: Transition from D0 to D3 found-> vendor=0x8086, dev=0x51a4, revid=0x01 domain=0, bus=0, slot=31, func=5 class=0c-80-00, hdrtype=0x00, mfdev=0 cmdreg=0x0402, statreg=0x0000, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) pci0:0:31:5: reprobing on driver added pci1: driver added pci2: driver added pci0: driver added found-> vendor=0x8086, dev=0xa71d, revid=0x00 domain=0, bus=0, slot=4, func=0 class=11-80-00, hdrtype=0x00, mfdev=0 cmdreg=0x0002, statreg=0x0090, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=255 powerspec 3 supports D0 D3 current D3 MSI supports 1 message pci0:0:4:0: reprobing on driver added pci0: set ACPI power state D0 on \134_SB_.PC00.TCPU pci0:0:4:0: Transition from D3 to D0 pci0:0:4:0: Transition from D0 to D3 found-> vendor=0x8086, dev=0xa74f, revid=0x00 domain=0, bus=0, slot=8, func=0 class=08-80-00, hdrtype=0x00, mfdev=0 cmdreg=0x0002, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=255 powerspec 2 supports D0 D3 current D3 MSI supports 1 message pci0:0:8:0: reprobing on driver added pci0: set ACPI power state D0 on \134_SB_.PC00.GNA0 pci0:0:8:0: Transition from D3 to D0 pci0:0:8:0: Transition from D0 to D3 found-> vendor=0x8086, dev=0xa77d, revid=0x01 domain=0, bus=0, slot=10, func=0 class=11-80-00, hdrtype=0x00, mfdev=0 cmdreg=0x0002, statreg=0x0010, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) powerspec 3 supports D0 D3 current D3 pci0:0:10:0: reprobing on driver added pci0:0:10:0: Transition from D3 to D0 pci0:0:10:0: Transition from D0 to D3 found-> vendor=0x8086, dev=0x51ef, revid=0x01 domain=0, bus=0, slot=20, func=2 class=05-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0002, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) powerspec 3 supports D0 D3 current D3 pci0:0:20:2: reprobing on driver added pci0:0:20:2: Transition from D3 to D0 pci0:0:20:2: Transition from D0 to D3 found-> vendor=0x8086, dev=0x51e0, revid=0x01 domain=0, bus=0, slot=22, func=0 class=07-80-00, hdrtype=0x00, mfdev=1 cmdreg=0x0002, statreg=0x0010, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=255 powerspec 3 supports D0 D3 current D3 MSI supports 1 message, 64 bit pci0:0:22:0: reprobing on driver added pci0: set ACPI power state D0 on \134_SB_.PC00.HECI pci0:0:22:0: Transition from D3 to D0 pci0:0:22:0: Transition from D0 to D3 found-> vendor=0x8086, dev=0x51a4, revid=0x01 domain=0, bus=0, slot=31, func=5 class=0c-80-00, hdrtype=0x00, mfdev=0 cmdreg=0x0402, statreg=0x0000, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) pci0:0:31:5: reprobing on driver added pci1: driver added pci2: driver added ACPI: Processor \134_SB_.PR20 (ACPI ID 20) ignored ACPI: Processor \134_SB_.PR21 (ACPI ID 21) ignored ACPI: Processor \134_SB_.PR22 (ACPI ID 22) ignored ACPI: Processor \134_SB_.PR23 (ACPI ID 23) ignored ACPI: Processor \134_SB_.PR24 (ACPI ID 24) ignored ACPI: Processor \134_SB_.PR25 (ACPI ID 25) ignored ACPI: Processor \134_SB_.PR26 (ACPI ID 26) ignored ACPI: Processor \134_SB_.PR27 (ACPI ID 27) ignored ACPI: Processor \134_SB_.PR28 (ACPI ID 28) ignored ACPI: Processor \134_SB_.PR29 (ACPI ID 29) ignored ACPI: Processor \134_SB_.PR30 (ACPI ID 30) ignored ACPI: Processor \134_SB_.PR31 (ACPI ID 31) ignored ACPI: Processor \134_SB_.PR32 (ACPI ID 32) ignored ACPI: Processor \134_SB_.PR33 (ACPI ID 33) ignored ACPI: Processor \134_SB_.PR34 (ACPI ID 34) ignored ACPI: Processor \134_SB_.PR35 (ACPI ID 35) ignored ACPI: Processor \134_SB_.PR36 (ACPI ID 36) ignored ACPI: Processor \134_SB_.PR37 (ACPI ID 37) ignored ACPI: Processor \134_SB_.PR38 (ACPI ID 38) ignored ACPI: Processor \134_SB_.PR39 (ACPI ID 39) ignored ACPI: Processor \134_SB_.PR40 (ACPI ID 40) ignored ACPI: Processor \134_SB_.PR41 (ACPI ID 41) ignored ACPI: Processor \134_SB_.PR42 (ACPI ID 42) ignored ACPI: Processor \134_SB_.PR43 (ACPI ID 43) ignored ACPI: Processor \134_SB_.PR44 (ACPI ID 44) ignored ACPI: Processor \134_SB_.PR45 (ACPI ID 45) ignored ACPI: Processor \134_SB_.PR46 (ACPI ID 46) ignored ACPI: Processor \134_SB_.PR47 (ACPI ID 47) ignored ACPI: Processor \134_SB_.PR48 (ACPI ID 48) ignored ACPI: Processor \134_SB_.PR49 (ACPI ID 49) ignored ACPI: Processor \134_SB_.PR50 (ACPI ID 50) ignored ACPI: Processor \134_SB_.PR51 (ACPI ID 51) ignored ACPI: Processor \134_SB_.PR52 (ACPI ID 52) ignored ACPI: Processor \134_SB_.PR53 (ACPI ID 53) ignored ACPI: Processor \134_SB_.PR54 (ACPI ID 54) ignored ACPI: Processor \134_SB_.PR55 (ACPI ID 55) ignored ACPI: Processor \134_SB_.PR56 (ACPI ID 56) ignored ACPI: Processor \134_SB_.PR57 (ACPI ID 57) ignored ACPI: Processor \134_SB_.PR58 (ACPI ID 58) ignored ACPI: Processor \134_SB_.PR59 (ACPI ID 59) ignored ACPI: Processor \134_SB_.PR60 (ACPI ID 60) ignored ACPI: Processor \134_SB_.PR61 (ACPI ID 61) ignored ACPI: Processor \134_SB_.PR62 (ACPI ID 62) ignored ACPI: Processor \134_SB_.PR63 (ACPI ID 63) ignored iwlwifi0: WRT: Invalid buffer destination iwlwifi0: WFPM_UMAC_PD_NOTIFICATION: 0x20 iwlwifi0: WFPM_LMAC2_PD_NOTIFICATION: 0x1f iwlwifi0: WFPM_AUTH_KEY_0: 0x90 iwlwifi0: CNVI_SCU_SEQ_DATA_DW9: 0x0 iwlwifi0: RFIm is deactivated, reason = 4 wlan0: bpf attached wlan0: bpf attached wlan0: Ethernet address: f4:6d:3f:e3:70:83 lo0: link state changed to UP wlan0: ieee80211_new_state_locked: pending SCAN -> AUTH transition lost Invalid TXQ id iwl_mvm_tx_mpdu:1204: fc 0x00b0 tid 8 txq_id 65535 mvm 0xfffffe015f4c9408 skb 0xfffff800312cd800 { len 30 } info 0xfffffe00dbe1dce0 sta 0xfffff80001cdf880 (if you see this please report to PR 274382) iwlwifi0: lkpi_sta_auth_to_scan:1181: mo_sta_state(NOTEXIST) failed: -5 iwlwifi0: lkpi_iv_newstate: error -5 during state transition 2 (AUTH) -> 1 (SCAN) iwlwifi0: lkpi_sta_auth_to_scan:1181: mo_sta_state(NOTEXIST) failed: -5 iwlwifi0: lkpi_iv_newstate: error -5 during state transition 2 (AUTH) -> 1 (SCAN) iwlwifi0: lkpi_sta_auth_to_scan:1181: mo_sta_state(NOTEXIST) failed: -5 iwlwifi0: lkpi_iv_newstate: error -5 during state transition 2 (AUTH) -> 0 (INIT) iwlwifi0: lkpi_sta_auth_to_scan:1181: mo_sta_state(NOTEXIST) failed: -5 iwlwifi0: lkpi_iv_newstate: error -5 during state transition 2 (AUTH) -> 1 (SCAN) axge0 on uhub0 axge0: on usbus1 unknown: set ACPI power state D0 on \134_SB_.PC00.I2C0.TPD0 iichid0: at addr 0x2c on iicbus12 iichid0: Interrupt setup failed. Fallback to sampling hidbus0: on iichid0 miibus0: on axge0 rgephy0: PHY 3 on miibus0 rgephy0: OUI 0x00e04c, model 0x0011, rev. 5 rgephy0: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow ue0: on axge0 ue0: bpf attached ue0: Ethernet address: d8:eb:97:b8:09:c8 ue0: link state changed to DOWN hms0: on hidbus0 hms0: 2 buttons and [XY] coordinates ID=2 hmt0: on hidbus0 hconf0: on hidbus0 hmt0: Multitouch touchpad with 0 external buttons, click-pad hmt0: 5 contacts with [C] properties. Report range [0:0] - [1452:912] ue0: link state changed to UP iwlwifi0: lkpi_sta_auth_to_scan:1181: mo_sta_state(NOTEXIST) failed: -5 iwlwifi0: lkpi_iv_newstate: error -5 during state transition 2 (AUTH) -> 0 (INIT) iwlwifi0: lkpi_sta_auth_to_scan:1181: mo_sta_state(NOTEXIST) failed: -5 iwlwifi0: lkpi_iv_newstate: error -5 during state transition 2 (AUTH) -> 1 (SCAN) Security policy loaded: MAC/ntpd (mac_ntpd) hdaa0: GPIO commit hdaa0: GPIO0: output state=1 hdaa0: GPIO1: output state=1 hdaa0: GPIO2: output state=1 iwlwifi0: lkpi_sta_auth_to_scan:1181: mo_sta_state(NOTEXIST) failed: -5 iwlwifi0: lkpi_iv_newstate: error -5 during state transition 2 (AUTH) -> 0 (INIT) iwlwifi0: lkpi_sta_auth_to_scan:1181: mo_sta_state(NOTEXIST) failed: -5 iwlwifi0: lkpi_iv_newstate: error -5 during state transition 2 (AUTH) -> 1 (SCAN) iwlwifi0: lkpi_sta_auth_to_scan:1181: mo_sta_state(NOTEXIST) failed: -5 iwlwifi0: lkpi_iv_newstate: error -5 during state transition 2 (AUTH) -> 0 (INIT) iwlwifi0: lkpi_sta_auth_to_scan:1181: mo_sta_state(NOTEXIST) failed: -5 iwlwifi0: lkpi_iv_newstate: error -5 during state transition 2 (AUTH) -> 1 (SCAN) iwlwifi0: lkpi_sta_auth_to_scan:1181: mo_sta_state(NOTEXIST) failed: -5 iwlwifi0: lkpi_iv_newstate: error -5 during state transition 2 (AUTH) -> 0 (INIT) pid 2185 (baloo_file), jid 0, uid 1001: exited on signal 6 (core dumped) system power profile changed to 'economy' acpi_acad0: Off Line system power profile changed to 'performance' acpi_acad0: On Line hostb0@pci0:0:0:0: class=0x060000 rev=0x00 hdr=0x00 vendor=0x8086 device=0xa706 subvendor=0x103c subdevice=0x8bf4 vendor = 'Intel Corporation' class = bridge subclass = HOST-PCI cap 09[e0] = vendor (length 20) Intel cap 0 version 1 vgapci0@pci0:0:2:0: class=0x030000 rev=0x04 hdr=0x00 vendor=0x8086 device=0xa7a0 subvendor=0x103c subdevice=0x8bf4 vendor = 'Intel Corporation' device = 'Raptor Lake-P [Iris Xe Graphics]' class = display subclass = VGA bar [10] = type Memory, range 64, base 0x6000000000, size 16777216, enabled bar [18] = type Prefetchable Memory, range 64, base 0x4000000000, size 268435456, enabled bar [20] = type I/O Port, range 32, base 0x3000, size 64, enabled cap 09[40] = vendor (length 12) Intel cap 0 version 1 cap 10[70] = PCI-Express 2 root endpoint max data 128(128) FLR max read 128 cap 05[ac] = MSI supports 1 message, vector masks enabled with 1 message cap 01[d0] = powerspec 2 supports D0 D3 current D0 ecap 001b[100] = Process Address Space ID 1 ecap 000f[200] = ATS 1 ecap 0013[300] = Page Page Request 1 ecap 0010[320] = SR-IOV 1 IOV disabled, Memory Space disabled, ARI disabled 0 VFs configured out of 7 supported First VF RID Offset 0x0001, VF RID Stride 0x0001 VF Device ID 0xa7a0 Page Sizes: 4096 (enabled), 8192, 65536, 262144, 1048576, 4194304 none0@pci0:0:4:0: class=0x118000 rev=0x00 hdr=0x00 vendor=0x8086 device=0xa71d subvendor=0x103c subdevice=0x8bf4 vendor = 'Intel Corporation' device = 'Raptor Lake Dynamic Platform and Thermal Framework Processor Participant' class = dasp bar [10] = type Memory, range 64, base 0x6001100000, size 131072, enabled cap 05[90] = MSI supports 1 message cap 01[d0] = powerspec 3 supports D0 D3 current D3 cap 09[e0] = vendor (length 12) Intel cap 0 version 1 pcib1@pci0:0:6:0: class=0x060400 rev=0x00 hdr=0x01 vendor=0x8086 device=0xa74d subvendor=0x103c subdevice=0x8bf4 vendor = 'Intel Corporation' device = 'Raptor Lake PCIe 4.0 Graphics Port' class = bridge subclass = PCI-PCI cap 10[40] = PCI-Express 2 root port max data 256(256) ARI enabled max read 128 link x4(x4) speed 8.0(16.0) ASPM L1(L1) slot 0 power limit 75000 mW cap 05[80] = MSI supports 1 message cap 0d[90] = PCI Bridge subvendor=0x103c subdevice=0x8bf4 cap 01[a0] = powerspec 3 supports D0 D3 current D0 ecap 0001[100] = AER 1 0 fatal 0 non-fatal 0 corrected ecap 000d[220] = ACS 1 Source Validation disabled, Translation Blocking disabled P2P Req Redirect disabled, P2P Cmpl Redirect disabled P2P Upstream Forwarding disabled, P2P Egress Control unavailable P2P Direct Translated unavailable, Enhanced Capability unavailable ecap 001e[200] = L1 PM Substates 1 ecap 001f[150] = Precision Time Measurement 1 ecap 0002[280] = VC 1 max VC1 ecap 0019[a30] = PCIe Sec 1 lane errors 0 ecap 0025[a90] = Data Link Feature 1 ecap 0026[a9c] = Physical Layer 16.0 GT/s 1 ecap 0027[edc] = Lane Margining at Receiver 1 none1@pci0:0:8:0: class=0x088000 rev=0x00 hdr=0x00 vendor=0x8086 device=0xa74f subvendor=0x103c subdevice=0x8bf4 vendor = 'Intel Corporation' device = 'GNA Scoring Accelerator module' class = base peripheral bar [10] = type Memory, range 64, base 0x6001150000, size 4096, enabled cap 05[90] = MSI supports 1 message cap 09[a0] = vendor (length 20) Intel cap 15 version 0 cap 01[dc] = powerspec 2 supports D0 D3 current D3 cap 13[f0] = PCI Advanced Features: FLR TP none2@pci0:0:10:0: class=0x118000 rev=0x01 hdr=0x00 vendor=0x8086 device=0xa77d subvendor=0x103c subdevice=0x8bf4 vendor = 'Intel Corporation' device = 'Raptor Lake Crashlog and Telemetry' class = dasp bar [10] = type Memory, range 64, base 0x6001130000, size 32768, enabled cap 10[70] = PCI-Express 2 root endpoint max data 128(128) max read 128 cap 01[d0] = powerspec 3 supports D0 D3 current D3 ecap 0023[100] = Designated Vendor-Specific 1 ecap 0023[110] = Designated Vendor-Specific 1 ecap 0023[120] = Designated Vendor-Specific 1 xhci0@pci0:0:13:0: class=0x0c0330 rev=0x00 hdr=0x00 vendor=0x8086 device=0xa71e subvendor=0x103c subdevice=0x8bf4 vendor = 'Intel Corporation' device = 'Raptor Lake-P Thunderbolt 4 USB Controller' class = serial bus subclass = USB bar [10] = type Memory, range 64, base 0x6001120000, size 65536, enabled cap 01[70] = powerspec 2 supports D0 D3 current D0 cap 05[80] = MSI supports 8 messages, 64 bit enabled with 1 message cap 09[90] = vendor (length 20) Intel cap 15 version 0 cap 09[b0] = vendor (length 0) Intel cap 0 version 1 xhci1@pci0:0:20:0: class=0x0c0330 rev=0x01 hdr=0x00 vendor=0x8086 device=0x51ed subvendor=0x103c subdevice=0x8bf4 vendor = 'Intel Corporation' device = 'Alder Lake PCH USB 3.2 xHCI Host Controller' class = serial bus subclass = USB bar [10] = type Memory, range 64, base 0x50600000, size 65536, enabled cap 01[70] = powerspec 2 supports D0 D3 current D0 cap 05[80] = MSI supports 8 messages, 64 bit enabled with 1 message cap 09[90] = vendor (length 20) Intel cap 15 version 0 cap 09[b0] = vendor (length 0) Intel cap 0 version 1 none3@pci0:0:20:2: class=0x050000 rev=0x01 hdr=0x00 vendor=0x8086 device=0x51ef subvendor=0x103c subdevice=0x8bf4 vendor = 'Intel Corporation' device = 'Alder Lake PCH Shared SRAM' class = memory subclass = RAM bar [10] = type Memory, range 64, base 0x6001148000, size 16384, enabled bar [18] = type Memory, range 64, base 0x600114f000, size 4096, enabled cap 01[80] = powerspec 3 supports D0 D3 current D3 iwlwifi0@pci0:0:20:3: class=0x028000 rev=0x01 hdr=0x00 vendor=0x8086 device=0x51f1 subvendor=0x8086 subdevice=0x0094 vendor = 'Intel Corporation' device = 'Raptor Lake PCH CNVi WiFi' class = network bar [10] = type Memory, range 64, base 0x6001144000, size 16384, enabled cap 01[c8] = powerspec 3 supports D0 D3 current D0 cap 05[d0] = MSI supports 1 message, 64 bit cap 10[40] = PCI-Express 2 root endpoint max data 128(128) FLR RO NS max read 128 cap 11[80] = MSI-X supports 16 messages, enabled Table in map 0x10[0x2000], PBA in map 0x10[0x3000] ecap 0018[100] = LTR 1 ecap 000b[164] = Vendor [1] ID 0010 Rev 0 Length 20 ig4iic0@pci0:0:21:0: class=0x0c8000 rev=0x01 hdr=0x00 vendor=0x8086 device=0x51e8 subvendor=0x103c subdevice=0x8bf4 vendor = 'Intel Corporation' device = 'Alder Lake PCH Serial IO I2C Controller' class = serial bus bar [10] = type Memory, range 64, base 0x80000000, size 4096, enabled cap 01[80] = powerspec 3 supports D0 D3 current D0 cap 09[90] = vendor (length 20) Intel cap 15 version 0 none4@pci0:0:22:0: class=0x078000 rev=0x01 hdr=0x00 vendor=0x8086 device=0x51e0 subvendor=0x103c subdevice=0x8bf4 vendor = 'Intel Corporation' device = 'Alder Lake PCH HECI Controller' class = simple comms bar [10] = type Memory, range 64, base 0x600114d000, size 4096, enabled cap 01[50] = powerspec 3 supports D0 D3 current D3 cap 05[8c] = MSI supports 1 message, 64 bit cap 09[a4] = vendor (length 20) Intel cap 15 version 0 pcib2@pci0:0:28:0: class=0x060400 rev=0x01 hdr=0x01 vendor=0x8086 device=0x51bb subvendor=0x103c subdevice=0x8bf4 vendor = 'Intel Corporation' device = 'Alder Lake-P PCH PCIe Root Port' class = bridge subclass = PCI-PCI cap 10[40] = PCI-Express 2 root port max data 128(256) ARI disabled max read 128 link x1(x1) speed 2.5(8.0) ASPM L0s/L1(L0s/L1) slot 3 power limit 100 mW cap 05[80] = MSI supports 1 message cap 0d[90] = PCI Bridge subvendor=0x103c subdevice=0x8bf4 cap 01[a0] = powerspec 3 supports D0 D3 current D0 ecap 0001[100] = AER 1 0 fatal 0 non-fatal 0 corrected ecap 000d[220] = ACS 1 Source Validation disabled, Translation Blocking disabled P2P Req Redirect disabled, P2P Cmpl Redirect disabled P2P Upstream Forwarding disabled, P2P Egress Control unavailable P2P Direct Translated unavailable, Enhanced Capability unavailable ecap 001f[150] = Precision Time Measurement 1 ecap 001e[200] = L1 PM Substates 1 ecap 0019[a30] = PCIe Sec 1 lane errors 0 isab0@pci0:0:31:0: class=0x060100 rev=0x01 hdr=0x00 vendor=0x8086 device=0x519d subvendor=0x103c subdevice=0x8bf4 vendor = 'Intel Corporation' device = 'Raptor Lake LPC/eSPI Controller' class = bridge subclass = PCI-ISA hdac0@pci0:0:31:3: class=0x040100 rev=0x01 hdr=0x00 vendor=0x8086 device=0x51ca subvendor=0x103c subdevice=0x8bf4 vendor = 'Intel Corporation' device = 'Raptor Lake-P/U/H cAVS' class = multimedia subclass = audio bar [10] = type Memory, range 64, base 0x6001140000, size 16384, enabled bar [20] = type Memory, range 64, base 0x6001000000, size 1048576, enabled cap 01[50] = powerspec 3 supports D0 D3 current D0 cap 09[80] = vendor (length 20) Intel cap 15 version 0 cap 05[60] = MSI supports 1 message, 64 bit enabled with 1 message ichsmb0@pci0:0:31:4: class=0x0c0500 rev=0x01 hdr=0x00 vendor=0x8086 device=0x51a3 subvendor=0x103c subdevice=0x8bf4 vendor = 'Intel Corporation' device = 'Alder Lake PCH-P SMBus Host Controller' class = serial bus subclass = SMBus bar [10] = type Memory, range 64, base 0x600114c000, size 256, enabled bar [20] = type I/O Port, range 32, base 0xefa0, size 32, enabled none5@pci0:0:31:5: class=0x0c8000 rev=0x01 hdr=0x00 vendor=0x8086 device=0x51a4 subvendor=0x103c subdevice=0x8bf4 vendor = 'Intel Corporation' device = 'Alder Lake-P PCH SPI Controller' class = serial bus bar [10] = type Memory, range 32, base 0xfe010000, size 4096, enabled nvme0@pci0:1:0:0: class=0x010802 rev=0x03 hdr=0x00 vendor=0x8086 device=0xf1aa subvendor=0x8086 subdevice=0x390f vendor = 'Intel Corporation' device = 'SSD 670p Series [Keystone Harbor]' class = mass storage subclass = NVM bar [10] = type Memory, range 64, base 0x50500000, size 16384, enabled cap 01[40] = powerspec 3 supports D0 D3 current D0 cap 05[50] = MSI supports 8 messages, 64 bit, vector masks cap 10[70] = PCI-Express 2 endpoint max data 256(512) FLR RO max read 512 link x4(x4) speed 8.0(8.0) ASPM L1(L1) ClockPM enabled cap 11[b0] = MSI-X supports 16 messages, enabled Table in map 0x10[0x2000], PBA in map 0x10[0x2100] ecap 0001[100] = AER 2 0 fatal 0 non-fatal 0 corrected ecap 000e[158] = ARI 1 ecap 0019[168] = PCIe Sec 1 lane errors 0 ecap 0010[188] = SR-IOV 1 IOV disabled, Memory Space disabled, ARI disabled 0 VFs configured out of 6 supported First VF RID Offset 0x0002, VF RID Stride 0x0001 VF Device ID 0x2265 Page Sizes: 4096 (enabled), 8192, 65536, 262144, 1048576, 4194304 ecap 0018[1c8] = LTR 1 ecap 001e[1d0] = L1 PM Substates 1 rtsx0@pci0:2:0:0: class=0xff0000 rev=0x01 hdr=0x00 vendor=0x10ec device=0x522a subvendor=0x103c subdevice=0x8bf4 vendor = 'Realtek Semiconductor Co., Ltd.' device = 'RTS522A PCI Express Card Reader' bar [10] = type Memory, range 32, base 0x50400000, size 4096, enabled cap 01[40] = powerspec 3 supports D0 D1 D2 D3 current D0 cap 05[50] = MSI supports 1 message, 64 bit enabled with 1 message cap 10[70] = PCI-Express 2 endpoint max data 128(128) RO max read 512 link x1(x1) speed 2.5(2.5) ASPM disabled(L0s/L1) ClockPM enabled ecap 0001[100] = AER 2 0 fatal 0 non-fatal 0 corrected ecap 0003[140] = Serial 1 00000001004ce000 ecap 0018[150] = LTR 1 ecap 001e[158] = L1 PM Substates 1