marius@t1-105:/home/marius > console v215 [Enter `^Ec?' for help] [-- MOTD -- v215] sc> poweron sc> console SC Alert: Host System has Reset Enter #. to return to ALOM. Done 0>Interrupt Crosscall.....Done 0>Init Memory.....Done 0>PLL Reset.....Done 0>Init Memory....Done 0>Test Memory....Done 0>Test CPU Caches....Done 0>Functional CPU Tests....Done 0>IO-Bridge Tests....Done 0>INFO: 0> POST Passed all devices. 0> 0>POST: Return to OBP. SC Alert: Host System has Reset Configuring system memory & CPU(s) Probing system devices Probing memory Probing I/O buses screen not found. keyboard not found. Keyboard not present. Using ttya for input and output. Probing system devices Probing memory Probing I/O buses Sun Fire V215, No Keyboard Copyright 2008 Sun Microsystems, Inc. All rights reserved. OpenBoot 4.30.0.a, 2048 MB memory installed, Serial #79945594. Ethernet address 0:14:4f:c3:df:7a, Host ID: 84c3df7a. Running diagnostic script obdiag/normal Testing /ebus@1f,464000/serial@2,80 Testing /ebus@1f,464000/serial@2,40 Testing /ebus@1f,464000/flashprom@0,0 Testing /ebus@1f,464000/env-monitor@3,0 Probing memory Probing I/O buses screen not found. keyboard not found. Keyboard not present. Using ttya for input and output. Probing system devices Probing memory Probing I/O buses Sun Fire V215, No Keyboard Copyright 2008 Sun Microsystems, Inc. All rights reserved. OpenBoot 4.30.0.a, 2048 MB memory installed, Serial #79945594. Ethernet address 0:14:4f:c3:df:7a, Host ID: 84c3df7a. Rebooting with command: boot Boot device: net1:dhcp File and args: 1000 Mbps full duplex Link up Timed out waiting for BOOTP/DHCP reply Consoles: Open Firmware console Booting with sun4u support. FreeBSD/sparc64 bootstrap loader, Revision 1.0 (marius@v20z.zeist.de, Thu Sep 10 19:51:22 CEST 2009) bootpath="/pci@1e,600000/pci@0/pci@9/pci@0/network@4,1:dhcp" boot: ethernet address: 00:14:4f:c3:df:7b 1000 Mbps full duplex Link up Loading /boot/defaults/loader.conf /boot/kernel/kernel data=0x9bc248+0x215e28 syms=[0x8+0xa75b0+0x8+0x97a7b] \ Hit [Enter] to boot immediately, or any other key for command prompt. Booting [/boot/kernel/kernel]... GDB: no debug ports present KDB: debugger backends: ddb KDB: current backend: ddb Copyright (c) 1992-2009 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 9.0-CURRENT #92: Thu Sep 17 23:36:23 CEST 2009 marius@v20z.zeist.de:/usr/home/marius/co/build/head/sparc64/usr/home/marius/co/head/src/sys/GENERIC WARNING: WITNESS option enabled, expect reduced performance. real memory = 2147483648 (2048 MB) avail memory = 2075590656 (1979 MB) cpu0: Sun Microsystems UltraSparc-IIIi Processor (1504.00 MHz CPU) ispfw: registered firmware ispfw: registered firmware ispfw: registered firmware ispfw: registered firmware ispfw: registered firmware ispfw: registered firmware ispfw: registered firmware ispfw: registered firmware ispfw: registered firmware ispfw: registered firmware ispfw: registered firmware ispfw: registered firmware ispfw: registered firmware ispfw: registered firmware ispfw: registered firmware kbd0 at kbdmux0 nexus0: pcib0: mem 0x4000f600000-0x4000f6effff,0x4000f410000-0x4000f473fff irq 1983,1982 on nexus0 pcib0: Fire, module-revision 3, IGN 0x1e pcib0: FO_XBC_ERR_LOG_EN 0x00000000ffffffff -> 0xffffffffffffffff pcib0: FO_XBC_ERR_STAT_CLR 0x0000000000000000 -> 0xffffffffffffffff pcib0: FO_XBC_INT_EN 0x0000000000000000 -> 0xffffffffffffffff pcib0: FIRE_JBUS_PAR_CTRL 0x0000000000000000 -> 0x8000000000000000 pcib0: FIRE_JBC_FATAL_RST_EN 0x0000000000000000 -> 0x000000000600c047 pcib0: FIRE_JBC_CORE_BLOCK_INT_EN 0x0000000000000000 -> 0xffffffffffffffff pcib0: FO_PCI_TLU_OEVENT_STAT_CLR 0x0001000000010000 -> 0x00ffffff00ffffff pcib0: FO_PCI_TLU_OEVENT_INT_EN 0x0000000000000000 -> 0x00ffffff00ffffff pcib0: FO_PCI_TLU_UERR_STAT_CLR 0x0000000000000000 -> 0x001fffff001fffff pcib0: FO_PCI_TLU_UERR_INT_EN 0x0000000000000000 -> 0x001fffff001fffff pcib0: FO_PCI_TLU_CERR_STAT_CLR 0x0000000000000000 -> 0x001fffff001fffff pcib0: FO_PCI_TLU_CERR_STAT_CLR 0x0000000000000000 -> 0x001fffff001fffff pcib0: FO_PCI_TLU_CTRL 0x0000000000130001 -> 0x00000000da130101 pcib0: FO_PCI_TLU_DEV_CTRL 0x0000000000000000 -> 0x0000000000000000 pcib0: FO_PCI_TLU_LNK_CTRL 0x0000000000000000 -> 0x0000000000000040 pcib0: FO_PCI_LPU_RST 0x0000000000000000 -> 0x0000000000000000 pcib0: FO_PCI_LPU_LNK_LYR_CFG 0x0000000000000100 -> 0x0000000000000100 pcib0: FO_PCI_LPU_FLW_CTRL_UPDT_CTRL 0x0000000000000003 -> 0x0000000000000003 pcib0: FO_PCI_LPU_TXLNK_FREQ_LAT_TMR_THRS 0x0000000000000043 -> 0x0000000000000216 pcib0: FO_PCI_LPU_TXLNK_RPLY_TMR_THRS 0x00000000000000fc -> 0x00000000000007d2 pcib0: FO_PCI_LPU_TXLNK_RTR_FIFO_PTR 0x0000000003cf03d0 -> 0x00000000ffff0000 pcib0: FO_PCI_LPU_LTSSM_CFG2 0x00000000002dc6c0 -> 0x00000000002dc6c0 pcib0: FO_PCI_LPU_LTSSM_CFG3 0x000000000007a120 -> 0x000000000007a120 pcib0: FO_PCI_LPU_LTSSM_CFG4 0x0000000000029c00 -> 0x0000000000028c00 pcib0: FO_PCI_LPU_LTSSM_CFG5 0x0000000000000000 -> 0x0000000000000000 pcib0: FO_PCI_ILU_ERR_STAT_CLR 0x0000000000000000 -> 0xffffffffffffffff pcib0: FO_PCI_ILU_INT_EN 0x0000000000000000 -> 0xffffffffffffffff pcib0: FO_PCI_IMU_ERR_STAT_CLR 0x0000000000000000 -> 0xffffffffffffffff pcib0: FO_PCI_IMU_INT_EN 0x0000000000000000 -> 0x0000000000000000 pcib0: FO_PCI_MMU_ERR_STAT_CLR 0x0000000000000000 -> 0x0000ffff0000ffff pcib0: FO_PCI_MMU_INT_EN 0x0000000000000000 -> 0x0000ffff0000ffff pcib0: FO_PCI_DMC_CORE_BLOCK_INT_EN 0x0000000000000000 -> 0xffffffffffffffff pcib0: FO_PCI_DMC_DBG_SEL_PORTA 0x0000000000000000 -> 0x0000000000000000 pcib0: FO_PCI_DMC_DBG_SEL_PORTB 0x0000000000000000 -> 0x0000000000000000 pcib0: FO_PCI_PEC_CORE_BLOCK_INT_EN 0x0000000000000000 -> 0xffffffffffffffff pcib0: FO_PCI_MSI_32_BIT_ADDR 0x0000000000000000 -> 0x000000007fff0000 pcib0: FO_PCI_MSI_64_BIT_ADDR 0x0000000000000000 -> 0x00000003ffff0000 pcib0: FO_XBC_PRF_CNT0 0x0000000000000000 -> 0x0000000000000000 pcib0: FO_XBC_PRF_CNT1 0x0000000000000000 -> 0x0000000000000000 pcib0: FO_XBC_PRF_CNT_SEL 0x0000000000000000 -> 0x0000000000000001 pcib0: FO_XBC_PRF_CNT0 0x0000000000000000 pcib0: FO_XBC_PRF_CNT0 0x0000000000000000 pcib0: DVMA map: 0xc0000000 to 0xffffffff pcib0: FO_PCI_MMU + IMR_CTL 0x0000030000000703 -> 0x0000000000000701 pcib0: [FILTER] pcib0: [FILTER] pci0: on pcib0 pcib0: bridge 2/0/0: control 0x0 -> 0x23 pcib0: bridge 2/0/0: latency timer 0 -> 64 pcib0: device 2/0/0: latency timer 0 -> 64 pcib1: mem 0x100000-0x11ffff at device 0.0 on pci0 pci1: on pcib1 pcib1: bridge 3/1/0: control 0x0 -> 0x23 pcib1: bridge 3/1/0: latency timer 0 -> 64 pcib1: device 3/1/0: latency timer 0 -> 64 pcib1: bridge 3/2/0: control 0x0 -> 0x23 pcib1: bridge 3/2/0: latency timer 0 -> 64 pcib1: device 3/2/0: latency timer 0 -> 64 pcib1: bridge 3/8/0: control 0x0 -> 0x23 pcib1: bridge 3/8/0: latency timer 0 -> 64 pcib1: device 3/8/0: latency timer 0 -> 64 pcib1: bridge 3/9/0: control 0x0 -> 0x23 pcib1: bridge 3/9/0: latency timer 0 -> 64 pcib1: device 3/9/0: latency timer 0 -> 64 pcib1: bridge 3/10/0: control 0x0 -> 0x23 pcib1: bridge 3/10/0: latency timer 0 -> 64 pcib1: device 3/10/0: latency timer 0 -> 64 pcib2: at device 1.0 on pci1 pci2: on pcib2 pcib2: bridge 4/0/0: control 0x0 -> 0x23 pcib2: bridge 4/0/0: latency timer 0 -> 64 pcib2: device 4/0/0: latency timer 0 -> 64 pcib3: at device 0.0 on pci2 pci3: on pcib3 pcib3: device 5/28/0: latency timer 64 -> 64 pcib3: device 5/28/1: latency timer 64 -> 64 pcib3: device 5/28/3: latency timer 64 -> 128 pcib3: device 5/30/0: latency timer 64 -> 8 pcib3: device 5/31/0: latency timer 64 -> 64 pcib4: at device 2.0 on pci1 pci4: on pcib4 pcib5: at device 8.0 on pci1 pci5: on pcib5 pcib6: at device 9.0 on pci1 pci6: on pcib6 pcib6: bridge 8/0/0: control 0x0 -> 0x23 pcib6: bridge 8/0/0: latency timer 64 -> 64 pcib6: device 8/0/0: latency timer 0 -> 64 pcib7: at device 0.0 on pci6 pci7: on pcib7 pcib7: device 9/4/0: latency timer 64 -> 255 pcib7: device 9/4/1: latency timer 64 -> 255 pcib7: bridge 9/8/0: control 0x0 -> 0x23 pcib7: bridge 9/8/0: latency timer 64 -> 64 pcib7: device 9/8/0: latency timer 64 -> 64 pcib8: at device 8.0 on pci7 pci8: on pcib8 pcib8: bridge 10/1/0: control 0x0 -> 0x23 pcib8: bridge 10/1/0: latency timer 0 -> 64 pcib8: device 10/1/0: latency timer 64 -> 64 pcib9: at device 1.0 on pci8 pci9: on pcib9 pcib9: device 11/0/0: latency timer 64 -> 255 pcib10: at device 10.0 on pci1 pci10: on pcib10 pcib10: bridge 12/0/0: control 0x0 -> 0x23 pcib10: bridge 12/0/0: latency timer 64 -> 64 pcib10: device 12/0/0: latency timer 0 -> 64 pcib11: at device 0.0 on pci10 pci11: on pcib11 pcib11: device 13/4/0: latency timer 64 -> 255 pcib11: device 13/4/1: latency timer 64 -> 255 pcib11: bridge 13/8/0: control 0x0 -> 0x23 pcib11: bridge 13/8/0: latency timer 64 -> 64 pcib11: device 13/8/0: latency timer 64 -> 64 pcib12: at device 8.0 on pci11 pci12: on pcib12 pcib12: device 14/1/0: latency timer 248 -> 255 pcib13: mem 0x4000ff00000-0x4000ffeffff,0x4000fc10000-0x4000fc73fff irq 2047,2046 on nexus0 pcib13: Fire, module-revision 3, IGN 0x1f pcib13: FO_XBC_ERR_LOG_EN 0x00000000ffffffff -> 0xffffffffffffffff pcib13: FO_XBC_ERR_STAT_CLR 0x0000000000000000 -> 0xffffffffffffffff pcib13: FO_XBC_INT_EN 0x0000000000000000 -> 0xffffffffffffffff pcib13: FIRE_JBUS_PAR_CTRL 0x0000000000000000 -> 0x8000000000000000 pcib13: FIRE_JBC_FATAL_RST_EN 0x0000000000000000 -> 0x000000000600c047 pcib13: FIRE_JBC_CORE_BLOCK_INT_EN 0x0000000000000000 -> 0xffffffffffffffff pcib13: FO_PCI_TLU_OEVENT_STAT_CLR 0x0000000000000000 -> 0x00ffffff00ffffff pcib13: FO_PCI_TLU_OEVENT_INT_EN 0x0000000000000000 -> 0x00ffffff00ffffff pcib13: FO_PCI_TLU_UERR_STAT_CLR 0x0000000000000000 -> 0x001fffff001fffff pcib13: FO_PCI_TLU_UERR_INT_EN 0x0000000000000000 -> 0x001fffff001fffff pcib13: FO_PCI_TLU_CERR_STAT_CLR 0x0000000000000000 -> 0x001fffff001fffff pcib13: FO_PCI_TLU_CERR_STAT_CLR 0x0000000000000000 -> 0x001fffff001fffff pcib13: FO_PCI_TLU_CTRL 0x0000000000130001 -> 0x00000000da130101 pcib13: FO_PCI_TLU_DEV_CTRL 0x0000000000000000 -> 0x0000000000000000 pcib13: FO_PCI_TLU_LNK_CTRL 0x0000000000000000 -> 0x0000000000000040 pcib13: FO_PCI_LPU_RST 0x0000000000000000 -> 0x0000000000000000 pcib13: FO_PCI_LPU_LNK_LYR_CFG 0x0000000000000100 -> 0x0000000000000100 pcib13: FO_PCI_LPU_FLW_CTRL_UPDT_CTRL 0x0000000000000003 -> 0x0000000000000003 pcib13: FO_PCI_LPU_TXLNK_FREQ_LAT_TMR_THRS 0x0000000000000043 -> 0x000000000000102f pcib13: FO_PCI_LPU_TXLNK_RPLY_TMR_THRS 0x00000000000000fc -> 0x0000000000003cb0 pcib13: FO_PCI_LPU_TXLNK_RTR_FIFO_PTR 0x00000000ffff0000 -> 0x00000000ffff0000 pcib13: FO_PCI_LPU_LTSSM_CFG2 0x00000000002dc6c0 -> 0x00000000002dc6c0 pcib13: FO_PCI_LPU_LTSSM_CFG3 0x000000000007a120 -> 0x000000000007a120 pcib13: FO_PCI_LPU_LTSSM_CFG4 0x0000000000029c00 -> 0x0000000000028c00 pcib13: FO_PCI_LPU_LTSSM_CFG5 0x0000000000000000 -> 0x0000000000000000 pcib13: FO_PCI_ILU_ERR_STAT_CLR 0x0000000000000000 -> 0xffffffffffffffff pcib13: FO_PCI_ILU_INT_EN 0x0000000000000000 -> 0xffffffffffffffff pcib13: FO_PCI_IMU_ERR_STAT_CLR 0x0000000000000000 -> 0xffffffffffffffff pcib13: FO_PCI_IMU_INT_EN 0x0000000000000000 -> 0x0000000000000000 pcib13: FO_PCI_MMU_ERR_STAT_CLR 0x0000000000000000 -> 0x0000ffff0000ffff pcib13: FO_PCI_MMU_INT_EN 0x0000000000000000 -> 0x0000ffff0000ffff pcib13: FO_PCI_DMC_CORE_BLOCK_INT_EN 0x0000000000000000 -> 0xffffffffffffffff pcib13: FO_PCI_DMC_DBG_SEL_PORTA 0x0000000000000000 -> 0x0000000000000000 pcib13: FO_PCI_DMC_DBG_SEL_PORTB 0x0000000000000000 -> 0x0000000000000000 pcib13: FO_PCI_PEC_CORE_BLOCK_INT_EN 0x0000000000000000 -> 0xffffffffffffffff pcib13: FO_PCI_MSI_32_BIT_ADDR 0x0000000000000000 -> 0x000000007fff0000 pcib13: FO_PCI_MSI_64_BIT_ADDR 0x0000000000000000 -> 0x00000003ffff0000 pcib13: DVMA map: 0xc0000000 to 0xffffffff pcib13: FO_PCI_MMU + IMR_CTL 0x0000030000000703 -> 0x0000000000000701 pcib13: [FILTER] pcib13: [FILTER] pci13: on pcib13 ebus0: mem 0x4000fc64000-0x4000fc6401f on nexus0 nexus0: mem 0x40000000000-0x40000000007 type memory-controller (no driver attached) ohci0: mem 0x1000000-0x1000fff at device 28.0 on pci3 ohci0: [ITHREAD] usbus0: on ohci0 ohci1: mem 0x2000000-0x2000fff at device 28.1 on pci3 ohci1: [ITHREAD] usbus1: on ohci1 ehci0: mem 0x200000-0x2000ff at device 28.3 on pci3 ehci0: [ITHREAD] usbus2: EHCI version 1.0 usbus2: on ehci0 isab0: at device 30.0 on pci3 isa0: on isab0 pci3: at device 31.0 (no driver attached) bge0: mem 0x4200000-0x420ffff,0x4010000-0x401ffff at device 4.0 on pci7 miibus0: on bge0 brgphy0: PHY 1 on miibus0 brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto bge0: Ethernet address: 00:14:4f:c3:df:7a bge0: [ITHREAD] bge1: mem 0x4400000-0x440ffff,0x4030000-0x403ffff at device 4.1 on pci7 miibus1: on bge1 brgphy1: PHY 1 on miibus1 brgphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto bge1: Ethernet address: 00:14:4f:c3:df:7b bge1: [ITHREAD] cas0: mem 0x4600000-0x47fffff at device 0.0 on pci9 miibus2: on cas0 brgphy2: PHY 1 on miibus2 brgphy2: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto cas0: 16kB RX FIFO, 9kB TX FIFO cas0: Ethernet address: 00:03:ba:6d:4a:bc cas0: [FILTER] bge2: mem 0x4a00000-0x4a0ffff,0x4910000-0x491ffff at device 4.0 on pci11 miibus3: on bge2 brgphy3: PHY 1 on miibus3 brgphy3: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto bge2: Ethernet address: 00:14:4f:c3:df:7c bge2: [ITHREAD] bge3: mem 0x4c00000-0x4c0ffff,0x4930000-0x493ffff at device 4.1 on pci11 miibus4: on bge3 brgphy4: PHY 1 on miibus4 brgphy4: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto bge3: Ethernet address: 00:14:4f:c3:df:7d bge3: [ITHREAD] mpt0: port 0x2000-0x20ff mem 0x4e00000-0x4e03fff,0x4e10000-0x4e1ffff at device 1.0 on pci12 mpt0: [ITHREAD] mpt0: MPI Version=1.5.12.0 mpt0: Capabilities: ( RAID-0 RAID-1E RAID-1 ) mpt0: 0 Active Volumes (2 Max) mpt0: 0 Hidden Drive Members (10 Max) ebus0: addr 0-0x1fffff (no driver attached) uart0: <16550 or compatible> addr 0x200000080-0x200000087 irq 1992 on ebus0 uart0: [FILTER] uart0: console (9600,n,8,1) uart1: <16550 or compatible> addr 0x200000040-0x200000047 irq 1993 on ebus0 uart1: [FILTER] ebus0: addr 0x200000000-0x200000007 irq 1994 (no driver attached) ebus0: addr 0x2000000c0 (no driver attached) ebus0: addr 0x300000000-0x300000080 (no driver attached) ebus0: addr 0x300000040-0x3000000c1 irq 1987 (no driver attached) nexus0: mem 0x4000fd30000-0x4000fd3003f irq 1985 type i2c (no driver attached) nexus0: type unknown (no driver attached) rtc0: at port 0x70-0x73 on isa0 Timecounter "tick" frequency 1504000000 Hz quality 1000 Timecounters tick every 1.000 msec usbus0: 12Mbps Full Speed USB v1.0 usbus1: 12Mbps Full Speed USB v1.0 ugen0.1: at usbus0 uhub0: on usbus0 ugen1.1: at usbus1 uhub1: on usbus1 usbus2: 480Mbps High Speed USB v2.0 ugen2.1: at usbus2 uhub2: on usbus2 uhub0: 3 ports with 3 removable, self powered uhub1: 3 ports with 3 removable, self powered WARNING: WITNESS option enabled, expect reduced performance. da0 at mpt0 bus 0 scbus0 target 0 lun 0 da0: Fixed Direct Access SCSI-5 device da0: 300.000MB/s transfers da0: Command Queueing enabled da0: 70007MB (143374738 512 byte sectors: 255H 63S/T 8924C) uhub2: 8 ports with 8 removable, self powered Trying to mount root from nfs: NFS ROOT: 192.168.1.40:/usr/data/nfsroot/sparc64 bge1: link state changed to DOWN bge1: link state changed to UP bge0: link state changed to DOWN Interface bge1 IP-Address 192.168.1.41 Broadcast 192.168.1.255 No suitable dump device was found. Entropy harvesting: interrupts ethernet point_to_point kickstart. mount_nfs: can't update /var/db/mounttab for 192.168.1.40:/usr/data/nfsroot/sparc64 Starting Network: lo0. bge2: link state changed to DOWN bge3: link state changed to DOWN devd: cannot open pid file: Operation not supported syslogd: cannot open pid file: Operation not supported /etc/rc: WARNING: Dump device does not exist. Savecore not run. Sep 17 21:46:36 v215 sm-mta[1126]: NOQUEUE: SYSERR(root): cannot flock(/var/run/sendmail.pid, fd=5, type=6, omode=40001, euid=0): Operation not supported Sep 17 21:46:36 v215 sm-msp-queue[1130]: n8HJkabV001129: SYSERR(root): cannot flock(/var/spool/clientmqueue/sm-client.pid, fd=4, type=6, omode=40001, euid=25): Operation not supported cron: can't open or create /var/run/cron.pid: Operation not supported /etc/rc: WARNING: failed to start cron Thu Sep 17 21:46:37 CEST 2009 Sep 17 21:46:37 v215 getty[1185]: open /dev/ttyv1: No such file or directory FreeBSD/sparc64 (v215.lab.zeist.de) (ttyu0) login: Sep 17 21:46:37 v215 getty[1188]: open /dev/ttyv4: No such file or directory Sep 17 21:46:37 v215 getty[1190]: open /dev/ttyv6: No such file or directory Sep 17 21:46:37 v215 getty[1186]: open /dev/ttyv2: No such file or directory Sep 17 21:46:37 v215 getty[1189]: open /dev/ttyv5: No such file or directory Sep 17 21:46:37 v215 getty[1187]: open /dev/ttyv3: No such file or directory Sep 17 21:46:37 v215 getty[1184]: open /dev/ttyv0: No such file or directory Sep 17 21:46:37 v215 getty[1191]: open /dev/ttyv7: No such file or directory Sep 17 21:46:37 v215 getty[1194]: open /dev/ttyu2: No such file or directory FreeBSD/sparc64 (v215.lab.zeist.de) (ttyu0) login: root Sep 17 21:50:02 v215 login: ROOT LOGIN (root) ON ttyu0 Last login: Thu Sep 17 21:16:26 on ttyu0 Copyright (c) 1992-2009 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 9.0-CURRENT (GENERIC) #92: Thu Sep 17 23:36:23 CEST 2009 v215# vmstat -i interrupt total rate pil2: ithrd 10593 44 vec1942: bge1 bge2 10437 43 pil12: filter 402 1 vec1935: mpt0 156 0 vec1992: uart0 402 1 pil14: tick 239008 995 Total 260998 1087 v215#