Index: if_bge.c
===================================================================
--- if_bge.c	(revision 185157)
+++ if_bge.c	(working copy)
@@ -1370,6 +1370,16 @@ bge_chipinit(struct bge_softc *sc)
 	    BGE_MODECTL_TX_NO_PHDR_CSUM);
 
 	/*
+	 * BCM5701 B5 have a bug causing data corruption when using
+	 * 64-bit DMA reads, which can be terminated early and then
+	 * completed later as 32-bit accesses, in combination with
+	 * certain bridges.
+	 */
+	if (sc->bge_asicrev == BGE_ASICREV_BCM5701 &&
+	    sc->bge_chipid == BGE_CHIPID_BCM5701_B5)
+		BGE_SETBIT(sc, BGE_MODE_CTL, BGE_MODECTL_FORCE_PCI32);
+
+	/*
 	 * Tell the firmware the driver is running
 	 */
 	if (sc->bge_asf_mode & ASF_STACKUP)
@@ -2462,26 +2472,21 @@ bge_attach(device_t dev)
 		 */
 		if (reg != 0)
 			sc->bge_flags |= BGE_FLAG_PCIE;
-	} else if (pci_find_extcap(dev, PCIY_PCIX, &reg) == 0) {
-		if (reg != 0)
-			sc->bge_flags |= BGE_FLAG_PCIX;
-	}
-			
 #else
 	if (BGE_IS_5705_PLUS(sc)) {
 		reg = pci_read_config(dev, BGE_PCIE_CAPID_REG, 4);
 		if ((reg & 0xFF) == BGE_PCIE_CAPID)
 			sc->bge_flags |= BGE_FLAG_PCIE;
+#endif
 	} else {
 		/*
 		 * Check if the device is in PCI-X Mode.
 		 * (This bit is not valid on PCI Express controllers.)
 		 */
-		if ((pci_read_config(sc->bge_dev, BGE_PCI_PCISTATE, 4) &
+		if ((pci_read_config(dev, BGE_PCI_PCISTATE, 4) &
 		    BGE_PCISTATE_PCI_BUSMODE) == 0)
 			sc->bge_flags |= BGE_FLAG_PCIX;
 	}
-#endif
 
 #if __FreeBSD_version > 602105
 	{