2 118>. GEOM_MIRROR: Device gm0: provider mirror/gm0 destroyed. GEOM_MIRROR: Device gm0 destroyed. Waiting (max 60 seconds) for system process `vnlru' to stop...done Waiting (max 60 seconds) for system process `bufdaemon' to stop...done Waiting (max 60 seconds) for system process `syncer' to stop... Syncing disks, vnodes remaining...3 1 1 0 0 done All buffers synced. Copyright (c) 1992-2010 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 8.0-STABLE #20: Tue Apr 27 07:09:25 BRT 2010 lioux@exxodus:/usr/obj/usr/src/sys/LIOUX i386 can't re-use a leaf (hwpstate_verbose)! module_register: module cpu/ichss already exists! Module cpu/ichss failed to register: 17 module_register: module uhub/ums already exists! Module uhub/ums failed to register: 17 module_register: module cpu/est already exists! Module cpu/est failed to register: 17 module_register: module cpu/hwpstate already exists! Module cpu/hwpstate failed to register: 17 module_register: module cpu/p4tcc already exists! Module cpu/p4tcc failed to register: 17 module_register: module cpu/powernow already exists! Module cpu/powernow failed to register: 17 module_register: module cpu/smist already exists! Module cpu/smist failed to register: 17 Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: AMD Athlon(tm) 64 X2 Dual Core Processor 4600+ (2410.99-MHz 686-class CPU) Origin = "AuthenticAMD" Id = 0x40fb2 Family = f Model = 4b Stepping = 2 Features=0x178bfbff Features2=0x2001 AMD Features=0xea500800 AMD Features2=0x1f real memory = 4294967296 (4096 MB) avail memory = 3131826176 (2986 MB) ACPI APIC Table: FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs FreeBSD/SMP: 1 package(s) x 2 core(s) cpu0 (BSP): APIC ID: 0 cpu1 (AP): APIC ID: 1 ioapic0: Changing APIC ID to 4 ioapic0 irqs 0-23 on motherboard kbd1 at kbdmux0 acpi0: on motherboard acpi0: [ITHREAD] acpi0: Power Button (fixed) acpi0: reservation of 0, a0000 (3) failed acpi0: reservation of 100000, bfde0000 (3) failed Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0 cpu0: on acpi0 cpu1: on acpi0 acpi_hpet0: iomem 0xfefff000-0xfefff3ff on acpi0 Timecounter "HPET" frequency 25000000 Hz quality 900 acpi_button0: on acpi0 pcib0: port 0xcf8-0xcff on acpi0 pci0: on pcib0 pci0: at device 0.0 (no driver attached) pci0: at device 0.1 (no driver attached) pci0: at device 0.2 (no driver attached) pci0: at device 0.3 (no driver attached) pci0: at device 0.4 (no driver attached) pci0: at device 0.5 (no driver attached) pci0: at device 0.6 (no driver attached) pci0: at device 0.7 (no driver attached) pcib1: at device 4.0 on pci0 pci1: on pcib1 vgapci0: port 0xdc00-0xdc7f mem 0xfa000000-0xfaffffff,0xc0000000-0xdfffffff,0xf8000000-0xf9ffffff irq 16 at device 0.0 on pci1 nvidia0: on vgapci0 vgapci0: child nvidia0 requested pci_enable_busmaster vgapci0: child nvidia0 requested pci_enable_io vgapci0: child nvidia0 requested pci_enable_io nvidia0: [ITHREAD] pci0: at device 8.0 (no driver attached) isab0: at device 9.0 on pci0 isa0: on isab0 pci0: at device 9.1 (no driver attached) ohci0: mem 0xfe02f000-0xfe02ffff irq 21 at device 10.0 on pci0 ohci0: [ITHREAD] usbus0: on ohci0 ehci0: mem 0xfe02e000-0xfe02e0ff irq 22 at device 10.1 on pci0 ehci0: [ITHREAD] usbus1: EHCI version 1.0 usbus1: on ehci0 atapci0: port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xfd00-0xfd0f at device 12.0 on pci0 ata0: on atapci0 ata0: [ITHREAD] ata1: on atapci0 ata1: [ITHREAD] atapci1: port 0x9f0-0x9f7,0xbf0-0xbf3,0x970-0x977,0xb70-0xb73,0xf800-0xf80f mem 0xfe02d000-0xfe02dfff irq 23 at device 13.0 on pci0 atapci1: [ITHREAD] ata2: on atapci1 ata2: [ITHREAD] ata3: on atapci1 ata3: [ITHREAD] atapci2: port 0x9e0-0x9e7,0xbe0-0xbe3,0x960-0x967,0xb60-0xb63,0xf300-0xf30f mem 0xfe02c000-0xfe02cfff irq 20 at device 13.1 on pci0 atapci2: [ITHREAD] ata4: on atapci2 ata4: [ITHREAD] ata5: on atapci2 ata5: [ITHREAD] atapci3: port 0xf200-0xf207,0xf100-0xf103,0xf000-0xf007,0xef00-0xef03,0xee00-0xee0f mem 0xfe02b000-0xfe02bfff irq 21 at device 13.2 on pci0 atapci3: [ITHREAD] ata6: on atapci3 ata6: [ITHREAD] ata7: on atapci3 ata7: [ITHREAD] pcib2: at device 14.0 on pci0 pci2: on pcib2 emu10kx0: port 0xcc00-0xcc3f irq 18 at device 8.0 on pci2 emu10kx0: [ITHREAD] pcm0: on emu10kx0 pcm0: pcm1: on emu10kx0 pcm2: on emu10kx0 pcm3: on emu10kx0 pci2: at device 8.1 (no driver attached) fwohci0: <1394 Open Host Controller Interface> mem 0xfdfff000-0xfdfff7ff,0xfdff8000-0xfdffbfff irq 19 at device 8.2 on pci2 fwohci0: [ITHREAD] fwohci0: OHCI version 1.10 (ROM=0) fwohci0: No. of Isochronous channels is 4. fwohci0: EUI64 00:02:3c:01:01:05:4b:71 fwohci0: Phy 1394a available S400, 2 ports. fwohci0: Link S400, max_rec 2048 bytes. firewire0: on fwohci0 dcons_crom0: on firewire0 dcons_crom0: bus_addr 0x1cc0000 fwe0: on firewire0 if_fwe0: Fake Ethernet address: 02:02:3c:05:4b:71 fwe0: Ethernet address: 02:02:3c:05:4b:71 fwip0: on firewire0 fwip0: Firewire address: 00:02:3c:01:01:05:4b:71 @ 0xfffe00000000, S400, maxrec 2048 sbp0: on firewire0 fwohci0: Initiate bus reset fwohci0: fwohci_intr_core: BUS reset fwohci0: fwohci_intr_core: node_id=0x00000000, SelfID Count=1, CYCLEMASTER mode fwohci1: mem 0xfdffe000-0xfdffe7ff,0xfdff4000-0xfdff7fff irq 16 at device 11.0 on pci2 fwohci1: [ITHREAD] fwohci1: OHCI version 1.10 (ROM=1) fwohci1: No. of Isochronous channels is 4. fwohci1: EUI64 00:11:d8:00:01:47:44:d9 fwohci1: Phy 1394a available S400, 2 ports. fwohci1: Link S400, max_rec 2048 bytes. firewire1: on fwohci1 dcons_crom1: on firewire1 dcons_crom1: bus_addr 0x1cc0000 dcons_crom1: dcons_paddr is already set fwe1: on firewire1 if_fwe1: Fake Ethernet address: 02:11:d8:47:44:d9 fwe1: Ethernet address: 02:11:d8:47:44:d9 fwip1: on firewire1 fwip1: Firewire address: 00:11:d8:00:01:47:44:d9 @ 0xfffe00000000, S400, maxrec 2048 sbp1: on firewire1 fwohci1: Initiate bus reset fwohci1: fwohci_intr_core: BUS reset fwohci1: fwohci_intr_core: node_id=0x00000000, SelfID Count=1, CYCLEMASTER mode nfe0: port 0xed00-0xed07 mem 0xfe02a000-0xfe02afff,0xfe029000-0xfe0290ff,0xfe028000-0xfe02800f irq 22 at device 16.0 on pci0 miibus0: on nfe0 e1000phy0: PHY 1 on miibus0 e1000phy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto nfe0: Ethernet address: 00:1b:fc:39:fb:23 nfe0: [FILTER] nfe0: [FILTER] nfe0: [FILTER] nfe0: [FILTER] nfe0: [FILTER] nfe0: [FILTER] nfe0: [FILTER] nfe0: [FILTER] nfe1: port 0xec00-0xec07 mem 0xfe027000-0xfe027fff,0xfe026000-0xfe0260ff,0xfe025000-0xfe02500f irq 23 at device 17.0 on pci0 miibus1: on nfe1 e1000phy1: PHY 1 on miibus1 e1000phy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto nfe1: Ethernet address: 00:1b:fc:39:e4:3a nfe1: [FILTER] nfe1: [FILTER] nfe1: [FILTER] nfe1: [FILTER] nfe1: [FILTER] nfe1: [FILTER] nfe1: [FILTER] nfe1: [FILTER] pcib3: at device 22.0 on pci0 pci3: on pcib3 atapci4: port 0xbc00-0xbc7f mem 0xfdeff000-0xfdeff07f,0xfdef8000-0xfdefbfff irq 16 at device 0.0 on pci3 atapci4: [ITHREAD] ata8: on atapci4 ata8: [ITHREAD] ata9: on atapci4 ata9: [ITHREAD] amdtemp0: on hostb3 acpi_tz0: on acpi0 ACPI Warning for \\_TZ_.THRM._PSL: Return Package type mismatch at index 0 - found [NULL Object Descriptor], expected Reference (20100331/nspredef-1197) acpi_aiboost0: on acpi0 atrtc0: port 0x70-0x73 on acpi0 fdc0: port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0 fdc0: [FILTER] uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 uart0: [FILTER] atkbdc0: port 0x60,0x64 irq 1 on acpi0 atkbd0: irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] atkbd0: [ITHREAD] pmtimer0 on isa0 orm0: at iomem 0xc0000-0xccfff pnpid ORM0000 on isa0 sc0: at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> vga0: at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 ppc0: parallel port not found. powernow0: on cpu0 powernow1: on cpu1 Timecounters tick every 0.868 msec vboxdrv: fAsync=0 offMin=0x489 offMax=0x651 supdrvGipCreate: omni timer not supported, falling back to synchronous mode firewire0: 1 nodes, maxhop <= 0 cable IRM irm(0) (me) firewire0: bus manager 0 firewire1: 1 nodes, maxhop <= 0 cable IRM irm(0) (me) firewire1: bus manager 0 ipfw2 (+ipv6) initialized, divert loadable, nat loadable, rule-based forwarding disabled, default to accept, logging disabled load_dn_sched dn_sched RR loaded load_dn_sched dn_sched WF2Q+ loaded load_dn_sched dn_sched FIFO loaded load_dn_sched dn_sched PRIO loaded load_dn_sched dn_sched QFQ loaded usbus0: 12Mbps Full Speed USB v1.0 usbus1: 480Mbps High Speed USB v2.0 ugen0.1: at usbus0 uhub0: on usbus0 ugen1.1: at usbus1 uhub1: on usbus1 acd0: DVDROM at ata0-slave UDMA33 ad4: 1430799MB at ata2-master UDMA100 SATA 3Gb/s ad6: 476940MB at ata3-master UDMA100 SATA 3Gb/s ad10: 152627MB at ata5-master UDMA100 SATA 3Gb/s ad12: 152627MB at ata6-master UDMA100 SATA 3Gb/s GEOM: ad4s3: geometry does not match label (255h,63s != 16h,63s). acd1: DVDR at ata7-master UDMA66 SATA 1.5Gb/s GEOM_MIRROR: Device mirror/gm0 launched (2/2). uhub0: 10 ports with 10 removable, self powered GEOM: mirror/gm0s1: geometry does not match label (16h,63s != 255h,63s). GEOM: ufsid/4a232f354ecfa8a7: geometry does not match label (16h,63s != 255h,63s). acd0: FAILURE - INQUIRY ILLEGAL REQUEST asc=0x24 ascq=0x00 (probe14:ata0:0:1:0): TEST UNIT READY. CDB: 0 0 0 0 0 0 (probe14:ata0:0:1:0): CAM status: SCSI Status Error (probe14:ata0:0:1:0): SCSI status: Check Condition (probe14:ata0:0:1:0): SCSI sense: NOT READY asc:3a,0 (Medium not present) uhub1: 10 ports with 10 removable, self powered acd1: FAILURE - INQUIRY ILLEGAL REQUEST asc=0x24 ascq=0x00 sks=0x48 0x00 0x01 (probe15:ata7:0:0:0): TEST UNIT READY. CDB: 0 0 0 0 0 0 (probe15:ata7:0:0:0): CAM status: SCSI Status Error (probe15:ata7:0:0:0): SCSI status: Check Condition (probe15:ata7:0:0:0): SCSI sense: NOT READY asc:3a,1 (Medium not present - tray closed) SMP: AP CPU #1 Launched! hwpmc: TSC/1/64/0x20 K8/4/48/0x1ff cd0 at ata0 bus 0 scbus2 target 1 lun 0 cd0: Removable CD-ROM SCSI-0 device cd0: 33.000MB/s transfers cd0: Attempt to query device size failed: NOT READY, Medium not present cd1 at ata7 bus 0 scbus7 target 0 lun 0 cd1: Removable CD-ROM SCSI-0 device cd1: 66.000MB/s transfers cd1: Attempt to query device size failed: NOT READY, Medium not present - tray closed Root mount waiting for: usbus1 ugen0.2: at usbus0 ums0: on usbus0 ums0: 8 buttons and [XYZ] coordinates ID=0 Root mount waiting for: usbus1 ugen1.2: at usbus1 Trying to mount root from ufs:/dev/ad4s3a ugen0.3: at usbus0 GEOM: ufsid/4a232f354ecfa8a7: geometry does not match label (16h,63s != 255h,63s). IP Filter: v4.1.28 initialized. Default = pass all, Logging = enabled nfe0: link state changed to UP