From: Alexander Kabaev To: jbh@FreeBSD.ORG Cc: Bcc: Subject: Verbose dmesg Reply-To: Copyright (c) 1992-2003 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 5.1-CURRENT #8: Wed Nov 5 16:36:23 EST 2003 kan@kan.dnsalias.net:/usr/download/mount/sys/i386/compile/BARS Preloaded elf kernel "/boot/kernel/kernel" at 0xc08c0000. MPTable: Calibrating clock(s) ... i8254 clock: 1193402 Hz CLK_USE_I8254_CALIBRATION not specified - using default frequency Timecounter "i8254" frequency 1193182 Hz quality 0 Calibrating TSC clock ... TSC clock: 701593565 Hz CPU: Intel Pentium III (701.59-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x683 Stepping = 3 Features=0x383fbff real memory = 536870912 (512 MB) Physical memory chunk(s): 0x0000000000001000 - 0x000000000009efff, 647168 bytes (158 pages) 0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages) 0x0000000000c29000 - 0x000000001f6cdfff, 514478080 bytes (125605 pages) avail memory = 512106496 (488 MB) APIC ID: physical 0, logical 0:0 APIC ID: physical 1, logical 0:1 FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs cpu0 (BSP): APIC ID: 0 cpu1 (AP): APIC ID: 1 bios32: Found BIOS32 Service Directory header at 0xc00fdb50 bios32: Entry = 0xfdb60 (c00fdb60) Rev = 0 Len = 1 pcibios: PCI BIOS entry at 0xf0000+0xdb81 pnpbios: Found PnP BIOS data at 0xc00f7270 pnpbios: Entry = f0000:6bc4 Rev = 1.0 Other BIOS signatures found: ioapic0: Assuming intbase of 0 ioapic0: intpin 0 -> ExtINT ioapic0: intpin 1 -> irq 1 ioapic0: intpin 2 -> irq 2 ioapic0: intpin 3 -> irq 3 ioapic0: intpin 4 -> irq 4 ioapic0: intpin 5 -> irq 5 ioapic0: intpin 6 -> irq 6 ioapic0: intpin 7 -> irq 7 ioapic0: intpin 8 -> irq 8 ioapic0: intpin 9 -> irq 9 ioapic0: intpin 10 -> irq 10 ioapic0: intpin 11 -> irq 11 ioapic0: intpin 12 -> irq 12 ioapic0: intpin 13 -> irq 13 ioapic0: intpin 14 -> irq 14 ioapic0: intpin 15 -> irq 15 ioapic0: intpin 16 -> irq 16 ioapic0: intpin 17 -> irq 17 ioapic0: intpin 18 -> irq 18 ioapic0: intpin 19 -> irq 19 ioapic0: intpin 20 -> irq 20 ioapic0: intpin 21 -> irq 21 ioapic0: intpin 22 -> irq 22 ioapic0: intpin 23 -> irq 23 ioapic0: intpin 1 trigger: edge ioapic0: intpin 1 polarity: active-hi ioapic0: Routing IRQ 0 -> intpin 2 ioapic0: intpin 2 trigger: edge ioapic0: intpin 2 polarity: active-hi ioapic0: intpin 3 trigger: edge ioapic0: intpin 3 polarity: active-hi ioapic0: intpin 4 trigger: edge ioapic0: intpin 4 polarity: active-hi ioapic0: intpin 5 trigger: edge ioapic0: intpin 5 polarity: active-hi ioapic0: intpin 6 trigger: edge ioapic0: intpin 6 polarity: active-hi ioapic0: intpin 7 trigger: edge ioapic0: intpin 7 polarity: active-hi ioapic0: intpin 8 trigger: edge ioapic0: intpin 8 polarity: active-hi ioapic0: intpin 12 trigger: edge ioapic0: intpin 12 polarity: active-hi ioapic0: intpin 13 trigger: edge ioapic0: intpin 13 polarity: active-hi ioapic0: intpin 14 trigger: edge ioapic0: intpin 14 polarity: active-hi ioapic0: intpin 15 trigger: edge ioapic0: intpin 15 polarity: active-hi ioapic0: Routing IRQ 10 -> intpin 16 ioapic0: intpin 16 trigger: level ioapic0: intpin 16 polarity: active-lo ioapic0: Routing IRQ 11 -> intpin 17 ioapic0: intpin 17 trigger: level ioapic0: intpin 17 polarity: active-lo ioapic0: Routing IRQ 9 -> intpin 19 ioapic0: intpin 19 trigger: level ioapic0: intpin 19 polarity: active-lo ioapic0: Routing SMI -> intpin 23 lapic: Routing ExtINT -> LINT0 lapic: Routing NMI -> LINT1 ioapic0 irqs 0-23 on motherboard cpu0 BSP: ID: 0x00000000 VER: 0x00040011 LDR: 0x01000000 DFR: 0x0fffffff lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff null: random: mem: Pentium Pro MTRR support enabled VESA: information block 56 45 53 41 00 03 00 01 00 01 01 00 00 00 22 00 00 01 40 00 72 01 07 01 00 01 0e 01 00 01 21 01 00 01 00 01 01 01 02 01 03 01 04 01 05 01 06 01 07 01 11 01 12 01 14 01 15 01 17 01 18 01 1a 01 VESA: 17 mode(s) found VESA: v3.0, 4096k memory, flags:0x1, mode table:0xc0816ea2 (1000022) VESA: NVidia VESA: NVidia Riva 128 Eval Card Rev C1 npx0: [FAST] npx0: on motherboard npx0: INT 16 interface pci_open(1): mode 1 addr port (0x0cf8) is 0x8000005c pci_open(1a): mode1res=0x80000000 (0x80000000) pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=71908086) pcibios: BIOS version 2.10 pcib0: at pcibus 0 on motherboard pci0: on pcib0 pci0: physical bus=0 map[10]: type 3, range 32, base f8000000, size 26, enabled found-> vendor=0x8086, dev=0x7190, revid=0x03 bus=0, slot=0, func=0 class=06-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0006, statreg=0x2210, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x7191, revid=0x03 bus=0, slot=1, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x001f, statreg=0x0220, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x88 (34000 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x7110, revid=0x02 bus=0, slot=7, func=0 class=06-01-00, hdrtype=0x00, mfdev=1 cmdreg=0x000f, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) map[20]: type 4, range 32, base 0000ffa0, size 4, enabled found-> vendor=0x8086, dev=0x7111, revid=0x01 bus=0, slot=7, func=1 class=01-01-80, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) map[20]: type 4, range 32, base 0000ef40, size 5, enabled pci_cfgintr: can't route an interrupt to 0:7 INTD found-> vendor=0x8086, dev=0x7112, revid=0x01 bus=0, slot=7, func=2 class=0c-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=d, irq=9 map[90]: type 4, range 32, base 00000440, size 4, enabled found-> vendor=0x8086, dev=0x7113, revid=0x02 bus=0, slot=7, func=3 class=06-80-00, hdrtype=0x00, mfdev=0 cmdreg=0x0001, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) map[10]: type 4, range 32, base 0000e800, size 8, enabled map[14]: type 1, range 64, base febff000, size 12, enabled pci_cfgintr: can't route an interrupt to 0:14 INTA found-> vendor=0x9005, dev=0x001f, revid=0x00 bus=0, slot=14, func=0 class=01-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0117, statreg=0x0290, cachelnsz=8 (dwords) lattimer=0x40 (1920 ns), mingnt=0x27 (9750 ns), maxlat=0x19 (6250 ns) intpin=a, irq=10 powerspec 1 supports D0 D3 current D0 map[10]: type 4, range 32, base 0000ec00, size 7, enabled map[14]: type 1, range 32, base febfef80, size 7, enabled pci_cfgintr: can't route an interrupt to 0:16 INTA found-> vendor=0x10b7, dev=0x9055, revid=0x30 bus=0, slot=16, func=0 class=02-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0117, statreg=0x0210, cachelnsz=8 (dwords) lattimer=0x40 (1920 ns), mingnt=0x0a (2500 ns), maxlat=0x0a (2500 ns) intpin=a, irq=11 powerspec 1 supports D0 D1 D2 D3 current D0 map[10]: type 1, range 32, base feb40000, size 18, enabled map[14]: type 4, range 32, base 0000efa0, size 3, enabled map[18]: type 4, range 32, base 0000ef88, size 3, enabled pci_cfgintr: can't route an interrupt to 0:20 INTA found-> vendor=0x12eb, dev=0x0002, revid=0xfe bus=0, slot=20, func=0 class=04-01-00, hdrtype=0x00, mfdev=0 cmdreg=0x0107, statreg=0x0290, cachelnsz=8 (dwords) lattimer=0x40 (1920 ns), mingnt=0x04 (1000 ns), maxlat=0x0c (3000 ns) intpin=a, irq=9 powerspec 1 supports D0 D2 D3 current D0 agp0: mem 0xf8000000-0xfbffffff at device 0.0 on pci0 agp0: allocating GATT for aperture of size 64M pcib1: at device 1.0 on pci0 pcib1: secondary bus 1 pcib1: subordinate bus 1 pcib1: I/O decode 0xd000-0xdfff pcib1: memory decode 0xfc100000-0xfe9fffff pcib1: prefetched decode 0xf1f00000-0xf3ffffff I bus> on pcib1 pci1: physical bus=1 map[10]: type 1, range 32, base fd000000, size 24, enabled map[14]: type 3, range 32, base f3000000, size 24, enabled pci_cfgintr: can't route an interrupt to 0:1 INTA found-> vendor=0x12d2, dev=0x0018, revid=0x22 bus=1, slot=0, func=0 class=03-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x02b0, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x03 (750 ns), maxlat=0x01 (250 ns) intpin=a, irq=11 pci1: at device 0.0 (no driver attached) isab0: at device 7.0 on pci0 isa0: on isab0 atapci0: port 0xffa0-0xffaf at device 7.1 on pci0 ata0: reset tp1 mask=03 ostat0=50 ostat1=00 ata0-master: stat=0x50 err=0x01 lsb=0x00 msb=0x00 ata0-slave: stat=0x00 err=0x01 lsb=0x00 msb=0x00 ata0: reset tp2 mask=03 stat0=50 stat1=00 devices=0x1 ata0: at 0x1f0 irq 14 on atapci0 ata0: [MPSAFE] ata1: reset tp1 mask=03 ostat0=50 ostat1=00 ata1-master: stat=0x00 err=0x01 lsb=0x14 msb=0xeb ata1-slave: stat=0x00 err=0x04 lsb=0x7f msb=0x7f ata1: reset tp2 mask=03 stat0=00 stat1=00 devices=0x4 ata1: at 0x170 irq 15 on atapci0 ata1: [MPSAFE] uhci0: port 0xef40-0xef5f irq 9 at device 7.2 on pci0 uhci0: LegSup = 0x1030 usb0: on uhci0 usb0: USB revision 1.0 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered intpm0: port 0x440-0x44f irq 9 at device 7.3 on pci0 intpm0: I/O mapped 440 intpm0: intr IRQ 9 enabled revision 0 intsmb0: on intpm0 smbus0: on intsmb0 smb0: on smbus0 intpm0: PM I/O mapped 400 ahc0: port 0xe800-0xe8ff mem 0xfebff000-0xfebfffff irq 10 at device 14.0 on pci0 ahc0: Defaulting to MEMIO on ahc0: Reading SEEPROM...done. ahc0: Manual LVD Termination ahc0: BIOS eeprom not present ahc0: Primary Low Byte termination Enabled ahc0: Primary High Byte termination Enabled ahc0: Downloading Sequencer Program... 423 instructions downloaded ahc0: Features 0x56f6, Bugs 0x6, Flags 0x20485540 aic7890/91: Ultra2 Wide Channel A, SCSI Id=7, 32/253 SCBs xl0: <3Com 3c905B-TX Fast Etherlink XL> port 0xec00-0xec7f mem 0xfebfef80-0xfebfefff irq 11 at device 16.0 on pci0 xl0: using memory mapped I/O xl0: Ethernet address: 00:50:da:c2:ba:63 xl0: media options word: a xl0: found MII/AUTO miibus0: on xl0 xlphy0: <3Com internal media interface> on miibus0 xlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto xl0: bpf attached pci0: at device 20.0 (no driver attached) ata: ata0 already exists; skipping it ata: ata1 already exists; skipping it Trying Read_Port at 203 Trying Read_Port at 243 Trying Read_Port at 283 Trying Read_Port at 2c3 Trying Read_Port at 303 Trying Read_Port at 343 Trying Read_Port at 383 Trying Read_Port at 3c3 pnpbios: 15 devices, largest 194 bytes PNP0c01: adding fixed memory32 range 0-0x9fbff, size=0x9fc00 PNP0c01: adding fixed memory32 range 0x9fc00-0x9ffff, size=0x400 PNP0c01: adding fixed memory32 range 0xe0000-0xfffff, size=0x20000 PNP0c01: adding fixed memory32 range 0x100000-0x1fffffff, size=0x1ff00000 PNP0c01: adding fixed memory32 range 0xfec00000-0xfec00fff, size=0x1000 PNP0c01: adding fixed memory32 range 0xfee00000-0xfee00fff, size=0x1000 PNP0c01: adding fixed memory32 range 0xfffc0000-0xffffffff, size=0x40000 pnpbios: handle 0 device ID PNP0c01 (010cd041) PNP0200: adding dma mask 0x10 PNP0200: adding io range 0-0xf, size=0x10, align=0 PNP0200: adding io range 0x80-0x90, size=0x11, align=0 PNP0200: adding io range 0x94-0x9f, size=0xc, align=0 PNP0200: adding io range 0xc0-0xde, size=0x1f, align=0 pnpbios: handle 2 device ID PNP0200 (0002d041) PNP0100: adding irq mask 0x1 PNP0100: adding io range 0x40-0x43, size=0x4, align=0 pnpbios: handle 3 device ID PNP0100 (0001d041) PNP0b00: adding irq mask 0x100 PNP0b00: adding io range 0x70-0x71, size=0x2, align=0 pnpbios: handle 4 device ID PNP0b00 (000bd041) PNP0303: adding irq mask 0x2 PNP0303: adding io range 0x60-0x60, size=0x1, align=0 PNP0303: adding io range 0x64-0x64, size=0x1, align=0 pnpbios: handle 5 device ID PNP0303 (0303d041) PNP0800: adding io range 0x61-0x61, size=0x1, align=0 pnpbios: handle 6 device ID PNP0800 (0008d041) PNP0c04: adding irq mask 0x2000 PNP0c04: adding io range 0xf0-0xff, size=0x10, align=0 pnpbios: handle 7 device ID PNP0c04 (040cd041) PNP0c02: adding io range 0x4d0-0x4d1, size=0x2, align=0x1 PNP0c02: adding io range 0xcf8-0xcff, size=0x8, align=0x1 PNP0c02: adding io range 0x10-0x1f, size=0x10, align=0x1 PNP0c02: adding io range 0x22-0x3f, size=0x1e, align=0x1 PNP0c02: adding io range 0x50-0x52, size=0x3, align=0x1 PNP0c02: adding io range 0x72-0x77, size=0x6, align=0x1 PNP0c02: adding io range 0x91-0x93, size=0x3, align=0x1 PNP0c02: adding io range 0xa2-0xbe, size=0x1d, align=0x1 PNP0c02: adding io range 0x400-0x43f, size=0x40, align=0x1 PNP0c02: adding io range 0x440-0x44f, size=0x10, align=0x1 pnpbios: handle 8 device ID PNP0c02 (020cd041) PNP0c02: adding io range 0x290-0x297, size=0x8, align=0x1 PNP0c02: adding io range 0x398-0x399, size=0x2, align=0x1 pnpbios: handle 9 device ID PNP0c02 (020cd041) pnpbios: handle 10 device ID PNP0a03 (030ad041) PNP0501: adding io range 0x3f8-0x3ff, size=0x8, align=0x4 PNP0501: adding irq mask 0x10 pnpbios: handle 11 device ID PNP0501 (0105d041) PNP0501: adding io range 0x2f8-0x2ff, size=0x8, align=0x4 PNP0501: adding irq mask 0x8 pnpbios: handle 12 device ID PNP0501 (0105d041) PNP0400: adding io range 0x378-0x37f, size=0x8, align=0x4 PNP0400: adding irq mask 0x80 pnpbios: handle 13 device ID PNP0400 (0004d041) PNP0700: adding io range 0x3f2-0x3f5, size=0x4, align=0 PNP0700: adding irq mask 0x40 PNP0700: adding dma mask 0x4 pnpbios: handle 14 device ID PNP0700 (0007d041) sc: sc0 already exists; skipping it vga: vga0 already exists; skipping it isa_probe_children: disabling PnP devices isa_probe_children: probing non-PnP devices orm0: