Boot Descriptor Ver: 7 -> 1/3 CPU clock: 800MHz Core Mask: 0xffff Board Type: 15 Revision: 2/0 Mac Address 00.0F.B7.10.3C.7A (14) Board: EBT5800 Model: CN5860p1.1-800-NSP Serial number: 2007-2.0-00108 Cache info: picache_stride = 4096 picache_loopcount = 8 pdcache_stride = 256 pdcache_loopcount = 64 cpu0: Cavium processor v1.3 MMU: Standard TLB, 64 entries L1 i-cache: 4 ways of 64 sets, 128 bytes per line L1 d-cache: 64 ways of 2 sets, 128 bytes per line Config1=0xfe3303da Config3=0x1080 Physical memory chunk(s): 0xfdc000 - 0xc0dbfff, 185597952 bytes (45312 pages) 0xc101000 - 0xff00fff, 65011712 bytes (15872 pages) 0x20000000 - 0x1ffffffff, 8053063680 bytes (1966080 pages) 0x410000000 - 0x41f7fffff, 260046848 bytes (63488 pages) Maxmem is 0x41f800000 pcpu is available at virtual address 0xc000000000000000. GDB: debug ports: uart GDB: current port: uart KDB: debugger backends: ddb gdb KDB: current backend: ddb Octeon SDK: Cavium Inc. OCTEON SDK version 2.3.0, build 427 Available Octeon features: SAAD ZIP CRYPTO KEY_MEMORY LED_CONTROLLER TRA DFA Copyright (c) 1992-2012 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 10.0-CURRENT #18 r242108:242345M: Mon Oct 29 23:34:51 PDT 2012 juli@freebsd-build32.redactedconsulting.com:/home/juli/freebsd-src/obj/mips.mips64/usr/home/juli/freebsd-src/sys/RADISYS mips WARNING: WITNESS option enabled, expect reduced performance. Preloaded elf kernel "kernel" at 0xffffffff80fb69a0. Create COP2 context zone real memory = 8563720192 (8363008K bytes) Physical memory chunk(s): 0x010f9000 - 0x0c0dbfff, 184430592 bytes (45027 pages) 0x0c101000 - 0x0ff00fff, 65011712 bytes (15872 pages) 0x20000000 - 0x1f0ffefff, 7801401344 bytes (1904639 pages) 0x410000000 - 0x41f7fffff, 260046848 bytes (63488 pages) avail memory = 8270172160 (7887MB) AP #1 started! AP #2 started! AP #3 started! AP #4 started! AP #5 started! AP #6 started! AP #7 started! AP #8 started! AP #9 started! AP #10 started! AP #11 started! AP #12 started! AP #13 started! AP #14 started! AP #15 started! FreeBSD/SMP: Multiprocessor System Detected: 16 CPUs random device not loaded; using insecure entropy ULE: setup cpu 0 ULE: setup cpu 1 ULE: setup cpu 2 ULE: setup cpu 3 ULE: setup cpu 4 ULE: setup cpu 5 ULE: setup cpu 6 ULE: setup cpu 7 ULE: setup cpu 8 ULE: setup cpu 9 ULE: setup cpu 10 ULE: setup cpu 11 ULE: setup cpu 12 ULE: setup cpu 13 ULE: setup cpu 14 ULE: setup cpu 15 wlan: <802.11 Link Layer> null: random: nfslock: pseudo-device mem: nexus0: Compact flash found in bootbus region 3 (CF 8-bit). cf0: on nexus0 model SanDisk SDCFJ-1024 heads 16 tracks 1986 sec_tracks 63 sectors 16681982 clock0: on nexus0 Timecounter "MIPS32" frequency 800000000 Hz quality 800 Event timer "MIPS32" frequency 800000000 Hz quality 800 rnd0: on nexus0 ciu0: on nexus0 obio0 on ciu0 uart1: on obio0 uart1: fast interrupt uart1: debug port (115200,n,8,1) uart0: on obio0 uart0: fast interrupt uart0: console (115200,n,8,1) octebus0: on ciu0 cavium-ethernet: Cavium Inc. OCTEON SDK version 2.3.0, build 427 Interface 1 has 4 ports (RGMII) Interface 2 has 4 ports (NPI) Warning: Enabling IPD when IPD already enabled. Warning: Enabling PKO when PKO already enabled. octe0: on octebus0 miibus0: on octe0 e1000phy0: PHY 0 on miibus0 e1000phy0: OUI 0x000ac2, model 0x000d, rev. 4 e1000phy0: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto octe0: bpf attached octe0: Ethernet address: 00:0f:b7:10:3c:7a octe1: on octebus0 miibus1: on octe1 e1000phy1: PHY 1 on miibus1 e1000phy1: OUI 0x000ac2, model 0x000d, rev. 4 e1000phy1: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto octe1: bpf attached octe1: Ethernet address: 00:0f:b7:10:3c:7b octe2: on octebus0 miibus2: on octe2 e1000phy2: PHY 2 on miibus2 e1000phy2: OUI 0x000ac2, model 0x000d, rev. 4 e1000phy2: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto octe2: bpf attached octe2: Ethernet address: 00:0f:b7:10:3c:7c octe3: on octebus0 miibus3: on octe3 e1000phy3: PHY 3 on miibus3 e1000phy3: OUI 0x000ac2, model 0x000d, rev. 4 e1000phy3: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto octe3: bpf attached octe3: Ethernet address: 00:0f:b7:10:3c:7d octe4: on octebus0 octe4: bpf attached octe4: Ethernet address: 00:0f:b7:10:3c:7e octe5: on octebus0 octe5: bpf attached octe5: Ethernet address: 00:0f:b7:10:3c:7f octe6: on octebus0 octe6: bpf attached octe6: Ethernet address: 00:0f:b7:10:3c:80 octe7: on octebus0 octe7: bpf attached octe7: Ethernet address: 00:0f:b7:10:3c:81 Device configuration finished. procfs registered Timecounter "Octeon" frequency 800000000 Hz quality 900 Timecounters tick every 10.000 msec vlan: initialized, using hash tables with chaining lo0: bpf attached SMP: AP CPU #11 launched. SMP: AP CPU #12 launched. SMP: AP CPU #2 launched. SMP: AP CPU #10 launched. SMP: AP CPU #4 launched. SMP: AP CPU #13 launched. SMP: AP CPU #5 launched. SMP: AP CPU #6 launched. SMP: AP CPU #8 launched. SMP: AP CPU #1 launched. SMP: AP CPU #7 launched. SMP: AP CPU #3 launched. SMP: AP CPU #9 launched. SMP: AP CPU #14 launched. SMP: AP CPU #15 launched. WARNING: WITNESS option enabled, expect reduced performance.