## Starting application at 0x80200000 ...
KDB: debugger backends: ddb
KDB: current backend: ddb
Copyright (c) 1992-2014 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 11.0-CURRENT #1 4ae7878(intrng)-dirty: Sun Apr  6 13:15:14 CEST 2014
    jceel@marian.oxidev.eu:/projects/FreeBSD/soc2012/obj/arm.armv6/projects/FreeBSD/soc2012/head.git/sys/PANDABOARD arm
FreeBSD clang version 3.4 (tags/RELEASE_34/final 197956) 20140216
CPU: Cortex A9-r1 rev 3 (Cortex-A core)
 Supported features: ARM_ISA THUMB2 JAZELLE THUMBEE ARMv4 Security_Ext
 WB disabled EABT branch prediction enabled
LoUU:2 LoC:1 LoUIS:2 
Cache level 1: 
 32KB/32B 4-way data cache WB Read-Alloc Write-Alloc
 32KB/32B 4-way instruction cache Read-Alloc
real memory  = 1073741824 (1024 MB)
avail memory = 1042415616 (994 MB)
Texas Instruments OMAP4430 Processor, Revision ES2.3
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
random device not loaded; using insecure entropy
random: <Software, Yarrow> initialized
nexus0: registered as interrupt controller
ofwbus0: <Open Firmware Device Tree>
simplebus0: <Flattened device tree simple bus> on ofwbus0
simplebus0: No interrupt-parent found, assuming nexus
simplebus0: Missing #interrupt-cells property, assuming <1>
gic0: <ARM Generic Interrupt Controller> mem 0x48241000-0x48241fff,0x48240100-0x482401ff irq nexus0:0 on simplebus0
gic0: registered as interrupt controller
gic0: pn 0x390, arch 0x1, rev 0x0, implementer 0x43b nirqs 160
omap4_prcm0: <TI OMAP Power, Reset and Clock Management> mem 0x4a306000-0x4a307fff,0x4a004000-0x4a004fff,0x4a008000-0x4a00ffff on simplebus0
l2cache0: <PL310 L2 cache controller> mem 0x48242000-0x48242fff irq gic0:32 on simplebus0
l2cache0: Part number: 0x3, release: 0x4
l2cache0: L2 Cache: 1024KB/32B 16 ways
l2cache0: L2 Cache enabled
mp_tmr0: <ARM MPCore Timers> mem 0x48240200-0x482402ff,0x48240600-0x482406ff irq gic0:27,gic0:29 on simplebus0
Timecounter "MPCore" frequency 504000000 Hz quality 800
Event timer "MPCore" frequency 504000000 Hz quality 1000
uart0: <16750 or compatible> mem 0x48020000-0x48020fff irq gic0:106 on simplebus0
uart0: console (115384,n,8,1)
ti_scm0: <TI Control Module> mem 0x4a100000-0x4a100fff on simplebus0
gpio0: <TI General Purpose I/O (GPIO)> mem 0x4a310000-0x4a310fff,0x48055000-0x48055fff,0x48057000-0x48057fff,0x48059000-0x48059fff,0x4805b000-0x4805bfff,0x4805d000-0x4805dfff irq gic0:61,gic0:62,gic0:63,gic0:64,gic0:65,gic0:66 on 
simplebus0
gpioc0: <GPIO controller> on gpio0
gpiobus0: <OFW GPIO bus> on gpio0
ehci0: <TI OMAP USB 2.0 controller> mem 0x4a064c00-0x4a064cff,0x4a064000-0x4a0646ff,0x4a062000-0x4a062fff irq gic0:109 on simplebus0
ehci0: Starting TI EHCI USB Controller
ehci0: UHH revision 0x50700100
ehci0: OMAP_UHH_SYSCONFIG: 0x00000014
ehci0: UHH setup done, uhh_hostconfig=0x8000011c
usbus0: EHCI version 1.0
usbus0 on ehci0
iichb0: <TI I2C Controller> mem 0x48070000-0x480700ff irq gic0:88 on simplebus0
iichb0: I2C revision 4.0
iicbus0: <OFW I2C bus> on iichb0
iic0: <I2C generic I/O> on iicbus0
ti_sdma0: <TI sDMA Controller> mem 0x4a056000-0x4a056fff irq gic0:44,gic0:45,gic0:46,gic0:47 on simplebus0
ti_sdma0: sDMA revision 00010900
sdhci_ti0: <TI MMCHS (SDHCI 2.0)> mem 0x4809c000-0x4809cfff irq gic0:115 on simplebus0
mmc0: <MMC/SD bus> on sdhci_ti0
Timecounters tick every 10.000 msec
usbus0: 480Mbps High Speed USB v2.0
ugen0.1: <Texas Instruments> at usbus0
uhub0: <Texas Instruments EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0
mmcsd0: 4GB <SDHC SA04G 1.0 SN 1087958464 MFG 09/2011 by 2 TM> at mmc0 24.0MHz/4bit/65535-block
bootpc_init: wired to interface 'ue0'
uhub0: 3 ports with 3 removable, self powered
ugen0.2: <vendor 0x0424> at usbus0
uhub1: <vendor 0x0424 product 0x9514, class 9/0, rev 2.00/2.00, addr 2> on usbus0
uhub1: MTT enabled
uhub1: 5 ports with 4 removable, self powered
ugen0.3: <vendor 0x0424> at usbus0
smsc0: <vendor 0x0424 product 0xec00, rev 2.00/2.00, addr 3> on usbus0
smsc0: chip 0xec00, rev. 0002
miibus0: <MII bus> on smsc0
ukphy0: <Generic IEEE 802.3u media interface> PHY 1 on miibus0
ukphy0:  none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
ue0: <USB Ethernet> on smsc0
ue0: Ethernet address: 06:20:ef:66:a0:8e
smsc0: chip 0xec00, rev. 0002
ue0: link state changed to DOWN
Sending DHCP Discover packet from interface ue0 (06:20:ef:66:a0:8e)