U-Boot SPL 2011.09-rc2 (Oct 06 2011 - 17:56:54) Texas Instruments OMAP4460 ES1.1 OMAP SD/MMC: 0 reading u-boot.img reading u-boot.bin mkimage signature not found - ih_magic = ea000014 Assuming u-boot.bin .. reading u-boot.bin U-Boot 2011.09-rc2 (Oct 06 2011 - 17:56:54) CPU : OMAP4430 Board: OMAP4 Panda I2C: ready DRAM: 1 GiB WARNING: Caches not enabled MMC: OMAP SD/MMC: 0 Using default environment In: serial Out: serial Err: serial Net: No ethernet found. Hit any key to stop autoboot: 3  2  1  0 reading uEnv.txt ** Unable to read "uEnv.txt" from mmc 0:1 ** reading boot.scr 133 bytes read Loaded script from boot.scr Running bootscript from mmc0 ... ## Executing script at 82000000 reading kernel.bin 3634616 bytes read ## Starting application at 0x80200000 ... initarm: console initialized arg1 mdp = 0x00000000 boothowto = 0x00000000 dtbp = 0xc0552060 kernel image addresses: kernbase = 0xc0000000 _etext (sdata) = 0xc04cb00c _edata = 0xc05775b8 __bss_start = 0xc05775b8 _end = 0xc0595ef4 loader passed (static) kenv: no env, null ptr processing avail regions: 80000000-c0000000 -> 80000000-80200000 = 200000 8064b000-c0000000 -> 8064b000-c0000000 = 3f9b5000 fill in phys_avail: region: 0x80000000 - 0x80200000 (0x00200000) region: 0x8064b000 - 0xc0000000 (0x3f9b5000) KDB: debugger backends: ddb KDB: current backend: ddb Copyright (c) 1992-2012 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 10.0-CURRENT #123 r234390:234445M: Wed Apr 18 20:15:54 PDT 2012 gonzo@bsdbox:/src/FreeBSD/obj/armv6/arm.arm/src/FreeBSD/armv6/sys/PANDABOARD arm CPU: Cortex A9-r2 rev 10 (Cortex-A core) Supported features: ARM_ISA THUMB2 JAZELLE THUMBEE ARMv4 Security_Ext WB disabled EABT branch prediction enabled LoUU:2 LoC:1 LoUIS:2 Cache level 1: 32KB/32B 4-way data cache WB Read-Alloc Write-Alloc 32KB/32B 4-way instruction cache Read-Alloc real memory = 1073741824 (1024 MB) avail memory = 1046401024 (997 MB) Texas Instruments OMAP4430 Processor, Revision ES2.3 random device not loaded; using insecure entropy simplebus0: on fdtbus0 gic0: mem 0xe8241000-0xe8241fff,0xe8240100-0xe82401ff on simplebus0 gic0: pn 0x390, arch 0x1, rev 0x2, implementer 0x43b nirqs 160 l2cache0: mem 0xe8242000-0xe8242fff on simplebus0 L2 Cache: 1024KB/32B 16 ways mp_tmr0: mem 0xe8240200-0xe82402ff,0xe8240600-0xe82406ff irq 27,29 on simplebus0 Timecounter "ARM MPCore Timecouter" frequency 504000000 Hz quality 1000 Event timer "ARM MPCore Eventtimer" frequency 504000000 Hz quality 1000 uart0: <16750 or compatible> mem 0xe8020000-0xe8020fff irq 106 on simplebus0 uart0: console (115384,n,8,1) ti_scm0: mem 0xd4e6a000-0xd4e6afff on simplebus0 setting internal 4 for usbb1_ulpiphy_stp setting internal 10c for usbb1_ulpiphy_clk setting internal 10c for usbb1_ulpiphy_dir setting internal 10c for usbb1_ulpiphy_nxt setting internal 10c for usbb1_ulpiphy_dat0 setting internal 10c for usbb1_ulpiphy_dat1 setting internal 10c for usbb1_ulpiphy_dat2 setting internal 10c for usbb1_ulpiphy_dat3 setting internal 10c for usbb1_ulpiphy_dat4 setting internal 10c for usbb1_ulpiphy_dat5 setting internal 10c for usbb1_ulpiphy_dat6 setting internal 10c for usbb1_ulpiphy_dat7 omap4_prcm0: mem 0xd4e6b000-0xd4e6cfff,0xd4e6d000-0xd4e6dfff,0xd4e6e000-0xd4e75fff on simplebus0 gpio0: mem 0xd4e76000-0xd4e76fff,0xe8055000-0xe8055fff,0xe8057000-0xe8057fff,0xe8059000-0xe8059fff,0xe805b000-0xe805bfff,0xe805d000-0xe805dfff irq 61,62,63,64,65,66 on simplebus0 gpioc0: on gpio0 gpiobus0: on gpio0 ehci0: mem 0xd4e77c00-0xd4e77cff,0xd4e78000-0xd4e786ff,0xd4e79000-0xd4e79fff irq 109 on simplebus0 ehci0: Starting TI EHCI USB Controller ehci0: UHH revision 0x50700100 ehci0: OMAP_UHH_SYSCONFIG: 0x00000014 ehci0: UHH setup done, uhh_hostconfig=0x8000001c usbus0: EHCI version 1.0 usbus0: on ehci0 iichb0: mem 0xe8070000-0xe80700ff irq 88 on simplebus0 iichb0: I2C revision 4.0 iicbus0: on iichb0 iic0: on iicbus0 twl0: on iicbus0 twl_vreg0: on twl0 ti_sdma0: mem 0xd4e7a000-0xd4e7afff irq 44,45,46,47 on simplebus0 ti_sdma0: sDMA revision 00010900 ti_mmchs0: mem 0xe809c000-0xe809cfff irq 115 on simplebus0 mmc0: on ti_mmchs0 Timecounters tick every 10.000 msec usbus0: 480Mbps High Speed USB v2.0 twl0: Found (sub)device at 0x48 twl0: Found (sub)device at 0x49 twl0: Found (sub)device at 0x4a twl0: Found (sub)device at 0x4b ugen0.1: at usbus0 uhub0: on usbus0 mmcsd0: 1886MB at mmc0 30MHz/4bit Root mount waiting for: usbus0 Root mount waiting for: usbus0 uhub0: 3 ports with 3 removable, self powered Root mount waiting for: usbus0 ugen0.2: at usbus0 uhub1: on usbus0 Root mount waiting for: usbus0 uhub1: 5 ports with 4 removable, self powered ugen0.3: at usbus0 smsc0: on usbus0 Trying to mousmsc0: chip 0xec00, rev. 0001 nt root from ufs:mmcsd0s2 []... miibus0: on smsc0 ukphy0: PHY 1 on miibus0 ukphy0: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto ue0: on smsc0 ue0: Ethernet address: 42:b5:1b:92:2f:fa warning: no time-of-day clock registered, system time will not be set accurately Setting hostuuid: 498c0afe-89d4-11e1-b9b6-42b51b922ffa. Setting hostid: 0x0b54866b. No suitable dump device was found. Entropy harvesting: interrupts ethernet point_to_point kickstart. Starting file system checks: /dev/mmcsd0s2: FILE SYSTEM CLEAN; SKIPPING CHECKS /dev/mmcsd0s2: clean, 405764 free (1988 frags, 50472 blocks, 0.4% fragmentation) Mounting local file systems:. Setting hostname: pandaboard. smsc0: chip 0xec00, rev. 0001 ue0: link state changed to DOWN Starting Network: lo0 ue0. lo0: flags=8049 metric 0 mtu 16384 options=3 inet 127.0.0.1 netmask 0xff000000 ue0: flags=8843 metric 0 mtu 1500 options=80001 ether 42:b5:1b:92:2f:fa media: Ethernet autoselect (none) status: no carrier Starting devd. ue0: link state changed to UP Starting dhclient. Can't find free bpf: No such file or directory exiting. /etc/rc.d/dhclient: WARNING: failed to start dhclient Generating host.conf. Waiting 30s for the default route interface: ............................. Creating and/or trimming log files. Starting syslogd. /etc/rc: WARNING: Dump device does not exist. Savecore not run. ELF ldconfig path: /lib /usr/lib /usr/lib/compat Clearing /tmp (X related). Updating motd:. Generating public/private rsa1 key pair. Your identification has been saved in /etc/ssh/ssh_host_key. Your public key has been saved in /etc/ssh/ssh_host_key.pub. The key fingerprint is: fc:fa:d4:6c:ca:d3:c2:c5:ff:7c:05:e1:50:0c:5f:27 root@pandaboard The key's randomart image is: +--[RSA1 1024]----+ | .+E o| | ..oo.| | o.. | | . o | | S . . | | . oo .| | .oo+. .| | ++o. ...| | ..+o .+| +-----------------+ Generating public/private dsa key pair. Your identification has been saved in /etc/ssh/ssh_host_dsa_key. Your public key has been saved in /etc/ssh/ssh_host_dsa_key.pub. The key fingerprint is: cd:16:3a:62:b7:9d:b0:4d:48:c3:93:d1:4a:6a:4f:56 root@pandaboard The key's randomart image is: +--[ DSA 1024]----+ | .. | | ..oE | | o*o. | | o.+B . | | .o+S = | | . o.X . | | o + | | | | | +-----------------+ Generating public/private rsa key pair. Your identification has been saved in /etc/ssh/ssh_host_rsa_key. Your public key has been saved in /etc/ssh/ssh_host_rsa_key.pub. The key fingerprint is: 6b:03:e0:ef:28:66:01:cc:76:8a:88:70:f8:9b:a6:f2 root@pandaboard The key's randomart image is: +--[ RSA 2048]----+ | | | | |o. . | |++.o . | |*+o . . S | |+.o . . . | | + . + | |. B o . . | |o*E.. . | +-----------------+ Generating public/private ecdsa key pair. Your identification has been saved in /etc/ssh/ssh_host_ecdsa_key. Your public key has been saved in /etc/ssh/ssh_host_ecdsa_key.pub. The key fingerprint is: e4:aa:df:df:d4:9d:19:83:42:79:79:18:b0:b8:cc:27 root@pandaboard The key's randomart image is: +--[ECDSA 256]---+ | ... | | . o + | | .. + + . | | oo o . o | | SE o . o | | . o .. .=| | . . .o.| | . . o | | ... ... . | +-----------------+ Starting sshd. Starting cron. Starting background file system checks in 60 seconds. Thu Apr 19 04:03:17 UTC 2012 FreeBSD/arm (pandaboard) (ttyu0) login: root Apr 19 04:03:23 pandaboard login: ROOT LOGIN (root) ON ttyu0 FreeBSD 10.0-CURRENT (PANDABOARD) #123 r234390:234445M: Wed Apr 18 20:15:54 PDT 2012 Welcome to FreeBSD! Before seeking technical support, please use the following resources: o Security advisories and updated errata information for all releases are at http://www.FreeBSD.org/releases/ - always consult the ERRATA section for your release first as it's updated frequently. o The Handbook and FAQ documents are at http://www.FreeBSD.org/ and, along with the mailing lists, can be searched by going to http://www.FreeBSD.org/search/. If the doc package has been installed (or fetched via pkg_add -r lang-freebsd-doc, where lang is the 2-letter language code, e.g. en), they are also available formatted in /usr/local/share/doc/freebsd. If you still have a question or problem, please take the output of `uname -a', along with any relevant error messages, and email it as a question to the questions@FreeBSD.org mailing list. If you are unfamiliar with FreeBSD's directory layout, please refer to the hier(7) manual page. If you are not familiar with manual pages, type `man man'. Edit /etc/motd to change this login announcement. pandaboard# uname -a FreeBSD pandaboard 10.0-CURRENT FreeBSD 10.0-CURRENT #123 r234390:234445M: Wed Apr 18 20:15:54 PDT 2012 gonzo@bsdbox:/src/FreeBSD/obj/armv6/arm.arm/src/FreeBSD/armv6/sys/PANDABOARD arm pandaboard#